1 files changed, 110 insertions, 0 deletions
diff --git a/Projects/STM32WB5MM-DK/Applications/BLE/BLE_Mesh_Model_Sensor/Core/Src/vl53l0x/vl53l0x_api_calibration.h b/Projects/STM32WB5MM-DK/Applications/BLE/BLE_Mesh_Model_Sensor/Core/Src/vl53l0x/vl53l0x_api_calibration.h
new file mode 100644
index 000000000..7757e76d0
--- /dev/null
+++ b/Projects/STM32WB5MM-DK/Applications/BLE/BLE_Mesh_Model_Sensor/Core/Src/vl53l0x/vl53l0x_api_calibration.h
@@ -0,0 +1,110 @@
+/**
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2019-2021 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+
+#ifndef _VL53L0X_API_CALIBRATION_H_
+#define _VL53L0X_API_CALIBRATION_H_
+
+#include "vl53l0x_def.h"
+#include "vl53l0x_platform.h"
+
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+VL53L0X_Error VL53L0X_perform_xtalk_calibration(VL53L0X_DEV Dev,
+		FixPoint1616_t XTalkCalDistance,
+		FixPoint1616_t *pXTalkCompensationRateMegaCps);
+
+VL53L0X_Error VL53L0X_perform_offset_calibration(VL53L0X_DEV Dev,
+		FixPoint1616_t CalDistanceMilliMeter,
+		int32_t *pOffsetMicroMeter);
+
+VL53L0X_Error VL53L0X_set_offset_calibration_data_micro_meter(VL53L0X_DEV Dev,
+		int32_t OffsetCalibrationDataMicroMeter);
+
+VL53L0X_Error VL53L0X_get_offset_calibration_data_micro_meter(VL53L0X_DEV Dev,
+		int32_t *pOffsetCalibrationDataMicroMeter);
+
+VL53L0X_Error VL53L0X_apply_offset_adjustment(VL53L0X_DEV Dev);
+
+VL53L0X_Error VL53L0X_perform_ref_spad_management(VL53L0X_DEV Dev,
+		uint32_t *refSpadCount, uint8_t *isApertureSpads);
+
+VL53L0X_Error VL53L0X_set_reference_spads(VL53L0X_DEV Dev,
+		uint32_t count, uint8_t isApertureSpads);
+
+VL53L0X_Error VL53L0X_get_reference_spads(VL53L0X_DEV Dev,
+		uint32_t *pSpadCount, uint8_t *pIsApertureSpads);
+
+VL53L0X_Error VL53L0X_perform_phase_calibration(VL53L0X_DEV Dev,
+	uint8_t *pPhaseCal, const uint8_t get_data_enable,
+	const uint8_t restore_config);
+
+VL53L0X_Error VL53L0X_perform_ref_calibration(VL53L0X_DEV Dev,
+	uint8_t *pVhvSettings, uint8_t *pPhaseCal, uint8_t get_data_enable);
+
+VL53L0X_Error VL53L0X_set_ref_calibration(VL53L0X_DEV Dev,
+		uint8_t VhvSettings, uint8_t PhaseCal);
+
+VL53L0X_Error VL53L0X_get_ref_calibration(VL53L0X_DEV Dev,
+		uint8_t *pVhvSettings, uint8_t *pPhaseCal);
+
+VL53L0X_Error enable_spad_bit(uint8_t spadArray[], uint32_t size,
+	uint32_t spadIndex);
+
+VL53L0X_Error count_enabled_spads(uint8_t spadArray[],
+		uint32_t byteCount, uint32_t maxSpads,
+		uint32_t *pTotalSpadsEnabled, uint8_t *pIsAperture);
+
+VL53L0X_Error set_ref_spad_map(VL53L0X_DEV Dev, uint8_t *refSpadArray);
+
+VL53L0X_Error get_ref_spad_map(VL53L0X_DEV Dev, uint8_t *refSpadArray);
+
+VL53L0X_Error enable_ref_spads(VL53L0X_DEV Dev,
+				uint8_t apertureSpads,
+				uint8_t goodSpadArray[],
+				uint8_t spadArray[],
+				uint32_t size,
+				uint32_t start,
+				uint32_t offset,
+				uint32_t spadCount,
+				uint32_t *lastSpad);
+
+VL53L0X_Error perform_ref_signal_measurement(VL53L0X_DEV Dev,
+		uint16_t *refSignalRate);
+
+
+VL53L0X_Error VL53L0X_perform_single_ref_calibration(VL53L0X_DEV Dev,
+		uint8_t vhv_init_byte);
+
+VL53L0X_Error VL53L0X_ref_calibration_io(VL53L0X_DEV Dev, uint8_t read_not_write,
+	uint8_t VhvSettings, uint8_t PhaseCal,
+	uint8_t *pVhvSettings, uint8_t *pPhaseCal,
+	const uint8_t vhv_enable, const uint8_t phase_enable);
+
+VL53L0X_Error VL53L0X_perform_vhv_calibration(VL53L0X_DEV Dev,
+	uint8_t *pVhvSettings, const uint8_t get_data_enable,
+	const uint8_t restore_config);
+
+void get_next_good_spad(uint8_t goodSpadArray[], uint32_t size,
+			uint32_t curr, int32_t *next);
+
+uint8_t is_aperture(uint32_t spadIndex);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _VL53L0X_API_CALIBRATION_H_ */