Welcome to mirror list, hosted at ThFree Co, Russian Federation.

github.com/Flipper-Zero/STM32CubeWB.git - Unnamed repository; edit this file 'description' to name the repository.
summaryrefslogtreecommitdiff
path: root/Projects/STM32WB5MM-DK/Applications/BLE/BLE_Mesh_ThermometerSensor/Core/Src/app_debug.c
diff options
context:
space:
mode:
Diffstat (limited to 'Projects/STM32WB5MM-DK/Applications/BLE/BLE_Mesh_ThermometerSensor/Core/Src/app_debug.c')
-rw-r--r--Projects/STM32WB5MM-DK/Applications/BLE/BLE_Mesh_ThermometerSensor/Core/Src/app_debug.c362
1 files changed, 362 insertions, 0 deletions
diff --git a/Projects/STM32WB5MM-DK/Applications/BLE/BLE_Mesh_ThermometerSensor/Core/Src/app_debug.c b/Projects/STM32WB5MM-DK/Applications/BLE/BLE_Mesh_ThermometerSensor/Core/Src/app_debug.c
new file mode 100644
index 000000000..8b5be2941
--- /dev/null
+++ b/Projects/STM32WB5MM-DK/Applications/BLE/BLE_Mesh_ThermometerSensor/Core/Src/app_debug.c
@@ -0,0 +1,362 @@
+/**
+ ******************************************************************************
+ * @file app_debug.c
+ * @author MCD Application Team
+ * @brief Debug capabilities
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>&copy; Copyright (c) 2018 STMicroelectronics.
+ * All rights reserved.</center></h2>
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+
+/* Includes ------------------------------------------------------------------*/
+#include "app_common.h"
+
+#include "app_debug.h"
+#include "utilities_common.h"
+#include "shci.h"
+#include "tl.h"
+#include "dbg_trace.h"
+
+/* Private typedef -----------------------------------------------------------*/
+typedef PACKED_STRUCT
+{
+ GPIO_TypeDef* port;
+ uint16_t pin;
+ uint8_t enable;
+ uint8_t reserved;
+} APPD_GpioConfig_t;
+
+/* Private defines -----------------------------------------------------------*/
+#define GPIO_NBR_OF_RF_SIGNALS 9
+#define GPIO_CFG_NBR_OF_FEATURES 34
+#define NBR_OF_TRACES_CONFIG_PARAMETERS 4
+#define NBR_OF_GENERAL_CONFIG_PARAMETERS 4
+
+/**
+ * THIS SHALL BE SET TO A VALUE DIFFERENT FROM 0 ONLY ON REQUEST FROM ST SUPPORT
+ */
+#define BLE_DTB_CFG 0
+
+/**
+ * System Debug Options flags to be configured with:
+ * - SHCI_C2_DEBUG_OPTIONS_IPCORE_LP
+ * - SHCI_C2_DEBUG_OPTIONS_IPCORE_NO_LP
+ * - SHCI_C2_DEBUG_OPTIONS_CPU2_STOP_EN
+ * - SHCI_C2_DEBUG_OPTIONS_CPU2_STOP_DIS
+ * which are used to set following configuration bits:
+ * - bit 0: 0: IP BLE core in LP mode 1: IP BLE core in run mode (no LP supported)
+ * - bit 1: 0: CPU2 STOP mode Enable 1: CPU2 STOP mode Disable
+ * - bit [2-7]: bits reserved ( shall be set to 0)
+ */
+#define SYS_DBG_CFG1 (SHCI_C2_DEBUG_OPTIONS_IPCORE_LP | SHCI_C2_DEBUG_OPTIONS_CPU2_STOP_EN)
+
+/* Private macros ------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static SHCI_C2_DEBUG_TracesConfig_t APPD_TracesConfig={0, 0, 0, 0};
+PLACE_IN_SECTION("MB_MEM2") ALIGN(4) static SHCI_C2_DEBUG_GeneralConfig_t APPD_GeneralConfig={BLE_DTB_CFG, SYS_DBG_CFG1, {0, 0}};
+
+/**
+ * THE DEBUG ON GPIO FOR CPU2 IS INTENDED TO BE USED ONLY ON REQUEST FROM ST SUPPORT
+ * It provides timing information on the CPU2 activity.
+ * All configuration of (port, pin) is supported for each features and can be selected by the user
+ * depending on the availability
+ */
+static const APPD_GpioConfig_t aGpioConfigList[GPIO_CFG_NBR_OF_FEATURES] =
+{
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_ISR - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_STACK_TICK - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_CMD_PROCESS - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_ACL_DATA_PROCESS - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* SYS_CMD_PROCESS - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* RNG_PROCESS - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* NVM_PROCESS - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_GENERAL - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_BLE_CMD_RX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_BLE_EVT_TX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_BLE_ACL_DATA_RX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_SYS_CMD_RX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_SYS_EVT_TX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_CLI_CMD_RX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_OT_CMD_RX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_OT_ACK_TX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_CLI_ACK_TX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_MEM_MANAGER_RX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IPCC_TRACES_TX - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* HARD_FAULT - Set on Entry / Reset on Exit */
+/* From v1.1.1 */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* IP_CORE_LP_STATUS - Set on Entry / Reset on Exit */
+/* From v1.2.0 */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* END_OF_CONNECTION_EVENT - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* TIMER_SERVER_CALLBACK - Toggle on Entry */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* PES_ACTIVITY - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* MB_BLE_SEND_EVT - Set on Entry / Reset on Exit */
+/* From v1.3.0 */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_NO_DELAY - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* BLE_STACK_STORE_NVM_CB - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* NVMA_WRITE_ONGOING - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* NVMA_WRITE_COMPLETE - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* NVMA_CLEANUP - Set on Entry / Reset on Exit */
+/* From v1.4.0 */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* NVMA_START - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* FLASH_EOP - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* FLASH_WRITE - Set on Entry / Reset on Exit */
+ { GPIOA, LL_GPIO_PIN_0, 0, 0}, /* FLASH_ERASE - Set on Entry / Reset on Exit */
+};
+
+/**
+ * THE DEBUG ON GPIO FOR CPU2 IS INTENDED TO BE USED ONLY ON REQUEST FROM ST SUPPORT
+ * This table is relevant only for BLE
+ * It provides timing information on BLE RF activity.
+ * New signals may be allocated at any location when requested by ST
+ * The GPIO allocated to each signal depend on the BLE_DTB_CFG value and cannot be changed
+ */
+#if( BLE_DTB_CFG == 7)
+static const APPD_GpioConfig_t aRfConfigList[GPIO_NBR_OF_RF_SIGNALS] =
+{
+ { GPIOB, LL_GPIO_PIN_2, 0, 0}, /* DTB10 - Tx/Rx SPI */
+ { GPIOB, LL_GPIO_PIN_7, 0, 0}, /* DTB11 - Tx/Tx SPI Clk */
+ { GPIOA, LL_GPIO_PIN_8, 0, 0}, /* DTB12 - Tx/Rx Ready & SPI Select */
+ { GPIOA, LL_GPIO_PIN_9, 0, 0}, /* DTB13 - Tx/Rx Start */
+ { GPIOA, LL_GPIO_PIN_10, 0, 0}, /* DTB14 - FSM0 */
+ { GPIOA, LL_GPIO_PIN_11, 0, 0}, /* DTB15 - FSM1 */
+ { GPIOB, LL_GPIO_PIN_8, 0, 0}, /* DTB16 - FSM2 */
+ { GPIOB, LL_GPIO_PIN_11, 0, 0}, /* DTB17 - FSM3 */
+ { GPIOB, LL_GPIO_PIN_10, 0, 0}, /* DTB18 - FSM4 */
+};
+#endif
+
+/* Global variables ----------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+static void APPD_SetCPU2GpioConfig( void );
+static void APPD_BleDtbCfg( void );
+
+/* Functions Definition ------------------------------------------------------*/
+void APPD_Init( void )
+{
+#if (CFG_DEBUGGER_SUPPORTED == 1)
+ /**
+ * Keep debugger enabled while in any low power mode
+ */
+ HAL_DBGMCU_EnableDBGSleepMode();
+ HAL_DBGMCU_EnableDBGStopMode();
+
+ /***************** ENABLE DEBUGGER *************************************/
+ LL_EXTI_EnableIT_32_63(LL_EXTI_LINE_48);
+
+#else
+ GPIO_InitTypeDef gpio_config = {0};
+
+ gpio_config.Pull = GPIO_NOPULL;
+ gpio_config.Mode = GPIO_MODE_ANALOG;
+
+ gpio_config.Pin = GPIO_PIN_15 | GPIO_PIN_14 | GPIO_PIN_13;
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ HAL_GPIO_Init(GPIOA, &gpio_config);
+ __HAL_RCC_GPIOA_CLK_DISABLE();
+
+ gpio_config.Pin = GPIO_PIN_4 | GPIO_PIN_3;
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ HAL_GPIO_Init(GPIOB, &gpio_config);
+ __HAL_RCC_GPIOB_CLK_DISABLE();
+
+ HAL_DBGMCU_DisableDBGSleepMode();
+ HAL_DBGMCU_DisableDBGStopMode();
+ HAL_DBGMCU_DisableDBGStandbyMode();
+
+#endif /* (CFG_DEBUGGER_SUPPORTED == 1) */
+
+#if(CFG_DEBUG_TRACE != 0)
+ DbgTraceInit();
+#endif
+
+ APPD_SetCPU2GpioConfig( );
+ APPD_BleDtbCfg( );
+
+ return;
+}
+
+void APPD_EnableCPU2( void )
+{
+ SHCI_C2_DEBUG_Init_Cmd_Packet_t DebugCmdPacket =
+ {
+ {{0,0,0}}, /**< Does not need to be initialized */
+ {(uint8_t *)aGpioConfigList,
+ (uint8_t *)&APPD_TracesConfig,
+ (uint8_t *)&APPD_GeneralConfig,
+ GPIO_CFG_NBR_OF_FEATURES,
+ NBR_OF_TRACES_CONFIG_PARAMETERS,
+ NBR_OF_GENERAL_CONFIG_PARAMETERS}
+ };
+
+ /**< Traces channel initialization */
+ TL_TRACES_Init( );
+
+ /** GPIO DEBUG Initialization */
+ SHCI_C2_DEBUG_Init( &DebugCmdPacket );
+
+ return;
+}
+
+/*************************************************************
+ *
+ * LOCAL FUNCTIONS
+ *
+ *************************************************************/
+static void APPD_SetCPU2GpioConfig( void )
+{
+ GPIO_InitTypeDef gpio_config = {0};
+ uint8_t local_loop;
+ uint16_t gpioa_pin_list;
+ uint16_t gpiob_pin_list;
+ uint16_t gpioc_pin_list;
+
+ gpioa_pin_list = 0;
+ gpiob_pin_list = 0;
+ gpioc_pin_list = 0;
+
+ for(local_loop = 0 ; local_loop < GPIO_CFG_NBR_OF_FEATURES; local_loop++)
+ {
+ if( aGpioConfigList[local_loop].enable != 0)
+ {
+ switch((uint32_t)aGpioConfigList[local_loop].port)
+ {
+ case (uint32_t)GPIOA:
+ gpioa_pin_list |= aGpioConfigList[local_loop].pin;
+ break;
+
+ case (uint32_t)GPIOB:
+ gpiob_pin_list |= aGpioConfigList[local_loop].pin;
+ break;
+
+ case (uint32_t)GPIOC:
+ gpioc_pin_list |= aGpioConfigList[local_loop].pin;
+ break;
+
+ default:
+ break;
+ }
+ }
+ }
+
+ gpio_config.Pull = GPIO_NOPULL;
+ gpio_config.Mode = GPIO_MODE_OUTPUT_PP;
+ gpio_config.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+
+ if(gpioa_pin_list != 0)
+ {
+ gpio_config.Pin = gpioa_pin_list;
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_C2GPIOA_CLK_ENABLE();
+ HAL_GPIO_Init(GPIOA, &gpio_config);
+ HAL_GPIO_WritePin(GPIOA, gpioa_pin_list, GPIO_PIN_RESET);
+ }
+
+ if(gpiob_pin_list != 0)
+ {
+ gpio_config.Pin = gpiob_pin_list;
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ __HAL_RCC_C2GPIOB_CLK_ENABLE();
+ HAL_GPIO_Init(GPIOB, &gpio_config);
+ HAL_GPIO_WritePin(GPIOB, gpiob_pin_list, GPIO_PIN_RESET);
+ }
+
+ if(gpioc_pin_list != 0)
+ {
+ gpio_config.Pin = gpioc_pin_list;
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ __HAL_RCC_C2GPIOC_CLK_ENABLE();
+ HAL_GPIO_Init(GPIOC, &gpio_config);
+ HAL_GPIO_WritePin(GPIOC, gpioc_pin_list, GPIO_PIN_RESET);
+ }
+
+ return;
+}
+
+static void APPD_BleDtbCfg( void )
+{
+#if (BLE_DTB_CFG != 0)
+ GPIO_InitTypeDef gpio_config = {0};
+ uint8_t local_loop;
+ uint16_t gpioa_pin_list;
+ uint16_t gpiob_pin_list;
+
+ gpioa_pin_list = 0;
+ gpiob_pin_list = 0;
+
+ for(local_loop = 0 ; local_loop < GPIO_NBR_OF_RF_SIGNALS; local_loop++)
+ {
+ if( aRfConfigList[local_loop].enable != 0)
+ {
+ switch((uint32_t)aRfConfigList[local_loop].port)
+ {
+ case (uint32_t)GPIOA:
+ gpioa_pin_list |= aRfConfigList[local_loop].pin;
+ break;
+
+ case (uint32_t)GPIOB:
+ gpiob_pin_list |= aRfConfigList[local_loop].pin;
+ break;
+
+ default:
+ break;
+ }
+ }
+ }
+
+ gpio_config.Pull = GPIO_NOPULL;
+ gpio_config.Mode = GPIO_MODE_AF_PP;
+ gpio_config.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
+ gpio_config.Alternate = GPIO_AF6_RF_DTB7;
+
+ if(gpioa_pin_list != 0)
+ {
+ gpio_config.Pin = gpioa_pin_list;
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_C2GPIOA_CLK_ENABLE();
+ HAL_GPIO_Init(GPIOA, &gpio_config);
+ }
+
+ if(gpiob_pin_list != 0)
+ {
+ gpio_config.Pin = gpiob_pin_list;
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ __HAL_RCC_C2GPIOB_CLK_ENABLE();
+ HAL_GPIO_Init(GPIOB, &gpio_config);
+ }
+#endif
+
+ return;
+}
+
+/*************************************************************
+ *
+ * WRAP FUNCTIONS
+ *
+*************************************************************/
+#if(CFG_DEBUG_TRACE != 0)
+void DbgOutputInit( void )
+{
+ HW_UART_Init(CFG_DEBUG_TRACE_UART);
+ return;
+}
+
+
+void DbgOutputTraces( uint8_t *p_data, uint16_t size, void (*cb)(void) )
+{
+ HW_UART_Transmit_DMA(CFG_DEBUG_TRACE_UART, p_data, size, cb);
+
+ return;
+}
+#endif
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-29 07:21:57 +0300