diff options
Diffstat (limited to 'Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/Core/Src/main.c')
-rw-r--r-- | Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/Core/Src/main.c | 78 |
1 files changed, 62 insertions, 16 deletions
diff --git a/Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/Core/Src/main.c b/Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/Core/Src/main.c index 1ad603641..92becf44e 100644 --- a/Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/Core/Src/main.c +++ b/Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/Core/Src/main.c @@ -6,13 +6,12 @@ ****************************************************************************** * @attention * - * <h2><center>© Copyright (c) 2021 STMicroelectronics. - * All rights reserved.</center></h2> + * Copyright (c) 2021 STMicroelectronics. + * All rights reserved. * - * This software component is licensed by ST under Ultimate Liberty license - * SLA0044, the "License"; You may not use this file except in compliance with - * the License. You may obtain a copy of the License at: - * www.st.com/SLA0044 + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ @@ -57,6 +56,7 @@ DMA_HandleTypeDef hdma_usart1_tx; /* Private function prototypes -----------------------------------------------*/ void SystemClock_Config(void); +void PeriphCommonClock_Config(void); static void MX_GPIO_Init(void); static void MX_DMA_Init(void); static void MX_RF_Init(void); @@ -93,6 +93,9 @@ int main(void) /* Configure the system clock */ SystemClock_Config(); +/* Configure the peripherals common clocks */ + PeriphCommonClock_Config(); + /* IPCC initialisation */ MX_IPCC_Init(); @@ -132,7 +135,6 @@ void SystemClock_Config(void) { RCC_OscInitTypeDef RCC_OscInitStruct = {0}; RCC_ClkInitTypeDef RCC_ClkInitStruct = {0}; - RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; /** Configure LSE Drive Capability */ @@ -171,17 +173,23 @@ void SystemClock_Config(void) { Error_Handler(); } - /** Initializes the peripherals clocks +} + +/** + * @brief Peripherals Common Clock Configuration + * @retval None + */ +void PeriphCommonClock_Config(void) +{ + RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0}; + + /** Initializes the peripherals clock */ - PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_RFWAKEUP - |RCC_PERIPHCLK_RTC|RCC_PERIPHCLK_USART1 - |RCC_PERIPHCLK_I2C3; - PeriphClkInitStruct.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2; - PeriphClkInitStruct.I2c3ClockSelection = RCC_I2C3CLKSOURCE_PCLK1; - PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; + PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_SMPS|RCC_PERIPHCLK_RFWAKEUP; PeriphClkInitStruct.RFWakeUpClockSelection = RCC_RFWKPCLKSOURCE_LSE; PeriphClkInitStruct.SmpsClockSelection = RCC_SMPSCLKSOURCE_HSE; PeriphClkInitStruct.SmpsDivSelection = RCC_SMPSCLKDIV_RANGE0; + if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { Error_Handler(); @@ -398,6 +406,14 @@ static void MX_GPIO_Init(void) GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + /*Configure GPIO pin : QSPI_BK_IO0_Pin */ + GPIO_InitStruct.Pin = QSPI_BK_IO0_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF10_QUADSPI; + HAL_GPIO_Init(QSPI_BK_IO0_GPIO_Port, &GPIO_InitStruct); + /*Configure GPIO pin : LPUART1_RX_MCU_Pin */ GPIO_InitStruct.Pin = LPUART1_RX_MCU_Pin; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; @@ -406,6 +422,14 @@ static void MX_GPIO_Init(void) GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1; HAL_GPIO_Init(LPUART1_RX_MCU_GPIO_Port, &GPIO_InitStruct); + /*Configure GPIO pin : PB8 */ + GPIO_InitStruct.Pin = GPIO_PIN_8; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; + HAL_GPIO_Init(GPIOB, &GPIO_InitStruct); + /*Configure GPIO pins : LPUART1_TX_MCU_Pin PB12 */ GPIO_InitStruct.Pin = LPUART1_TX_MCU_Pin|GPIO_PIN_12; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; @@ -422,6 +446,14 @@ static void MX_GPIO_Init(void) GPIO_InitStruct.Alternate = GPIO_AF1_TIM2; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + /*Configure GPIO pin : PA10 */ + GPIO_InitStruct.Pin = GPIO_PIN_10; + GPIO_InitStruct.Mode = GPIO_MODE_AF_OD; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF4_I2C1; + HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + /*Configure GPIO pins : USB_P_Pin USB_N_Pin */ GPIO_InitStruct.Pin = USB_P_Pin|USB_N_Pin; GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; @@ -490,6 +522,14 @@ static void MX_GPIO_Init(void) GPIO_InitStruct.Alternate = GPIO_AF8_LPUART1; HAL_GPIO_Init(GPIOA, &GPIO_InitStruct); + /*Configure GPIO pin : QSPI_BK_SCK_Pin */ + GPIO_InitStruct.Pin = QSPI_BK_SCK_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF10_QUADSPI; + HAL_GPIO_Init(QSPI_BK_SCK_GPIO_Port, &GPIO_InitStruct); + /*Configure GPIO pins : CS_DISP_Pin GPIO_SELECT2_Pin */ GPIO_InitStruct.Pin = CS_DISP_Pin|GPIO_SELECT2_Pin; GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP; @@ -524,6 +564,14 @@ static void MX_GPIO_Init(void) GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + /*Configure GPIO pins : QSPI_BK_NCS_Pin QSPI_BK_IO1_Pin QSPI_BK_IO2_Pin */ + GPIO_InitStruct.Pin = QSPI_BK_NCS_Pin|QSPI_BK_IO1_Pin|QSPI_BK_IO2_Pin; + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW; + GPIO_InitStruct.Alternate = GPIO_AF10_QUADSPI; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + /*Configure GPIO pin : PE3 */ GPIO_InitStruct.Pin = GPIO_PIN_3; GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING; @@ -644,5 +692,3 @@ void assert_failed(uint8_t *file, uint32_t line) /* USER CODE END 6 */ } #endif /* USE_FULL_ASSERT */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |