diff options
Diffstat (limited to 'Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/readme.txt')
-rw-r--r-- | Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/readme.txt | 101 |
1 files changed, 101 insertions, 0 deletions
diff --git a/Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/readme.txt b/Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/readme.txt new file mode 100644 index 000000000..82b14153d --- /dev/null +++ b/Projects/STM32WB5MM-DK/Applications/BLE/BLE_TransparentMode/readme.txt @@ -0,0 +1,101 @@ +/** + @page BLE_TransparentMode example + + @verbatim + ****************************************************************************** + * @file BLE/BLE_TransparentMode/readme.txt + * @author MCD Application Team + * @brief Description of the Transparent Mode application. + ****************************************************************************** + * + * Copyright (c) 2021 STMicroelectronics. All rights reserved. + * + * This software component is licensed by ST under Ultimate Liberty license + * SLA0044, the "License"; You may not use this file except in compliance with + * the License. You may obtain a copy of the License at: + * www.st.com/SLA0044 + * + ****************************************************************************** + @endverbatim + +@par Example Description + +How to communicate with the STM32CubeMonitor-RF Tool using the transparent mode. + +@note Care must be taken when using HAL_Delay(), this function provides accurate delay (in milliseconds) + based on variable incremented in SysTick ISR. This implies that if HAL_Delay() is called from + a peripheral ISR process, then the SysTick interrupt must have higher priority (numerically lower) + than the peripheral interrupt. Otherwise the caller ISR process will be blocked. + To change the SysTick interrupt priority you have to use HAL_NVIC_SetPriority() function. + +@note The application needs to ensure that the SysTick time base is always set to 1 millisecond + to have correct HAL operation. + +@par Keywords + +Connectivity, BLE, IPCC, HSEM, RTC, UART, PWR, BLE protocol, Dual core + +@par Directory contents + + - BLE/BLE_TransparentMode/Core/Inc/app_common.h Header for all modules with common definition + - BLE/BLE_TransparentMode/Core/Inc/app_conf.h Parameters configuration file of the application + - BLE/BLE_TransparentMode/Core/Inc/app_debug.h Header for app_debug.c module + - BLE/BLE_TransparentMode/Core/Inc/app_entry.h Parameters configuration file of the application + - BLE/BLE_TransparentMode/Core/Inc/hw_conf.h Configuration file of the HW + - BLE/BLE_TransparentMode/Core/Inc/hw_if.h HW interface + - BLE/BLE_TransparentMode/Core/Inc/main.h Header for main.c module + - BLE/BLE_TransparentMode/Core/Inc/stm32_lpm_if.h Header for stm32_lpm_if.c module (LP management) + - BLE/BLE_TransparentMode/Core/Inc/stm32wb5mm_dk_conf.h Configuration file of the Discovery board + - BLE/BLE_TransparentMode/Core/Inc/stm32wbxx_hal_conf.h HAL configuration file + - BLE/BLE_TransparentMode/Core/Inc/stm32wbxx_it.h Interrupt handlers header file + - BLE/BLE_TransparentMode/Core/Inc/utilities_conf.h Configuration file of the utilities + - BLE/BLE_TransparentMode/Core/Src/app_debug.c Debug capabilities source file for STM32WPAN Middleware + - BLE/BLE_TransparentMode/Core/Src/app_entry.c Initialization of the application + - BLE/BLE_TransparentMode/Core/Src/hw_timerserver.c Timer Server based on RTC + - BLE/BLE_TransparentMode/Core/Src/hw_uart.c UART Driver + - BLE/BLE_TransparentMode/Core/Src/main.c Main program + - BLE/BLE_TransparentMode/Core/Src/stm32_lpm_if.c Low Power Manager Interface + - BLE/BLE_TransparentMode/Core/Src/stm32wbxx_hal_msp.c MSP Initialization and de-Initialization code + - BLE/BLE_TransparentMode/Core/Src/stm32wbxx_it.c Interrupt handlers + - BLE/BLE_TransparentMode/Core/Src/system_stm32wbxx.c stm32wbxx system source file + - BLE/BLE_TransparentMode/STM32_WPAN/App/app_ble.h Header for app_ble.c module + - BLE/BLE_TransparentMode/STM32_WPAN/App/ble_conf.h BLE Services configuration + - BLE/BLE_TransparentMode/STM32_WPAN/App/ble_dbg_conf.h BLE Traces configuration of the BLE services + - BLE/BLE_TransparentMode/STM32_WPAN/App/dis_app.h Header for dis_app.c module + - BLE/BLE_TransparentMode/STM32_WPAN/App/tm.h Header for tm.c module + - BLE/BLE_TransparentMode/STM32_WPAN/App/tl_dbg_conf.h Debug configuration file for stm32wpan transport layer interface + - BLE/BLE_TransparentMode/STM32_WPAN/App/app_ble.c BLE Profile implementation + - BLE/BLE_TransparentMode/STM32_WPAN/App/dis_app.c Device Information Service application + - BLE/BLE_TransparentMode/STM32_WPAN/App/tm.c Transparent Mode implementation + - BLE/BLE_TransparentMode/STM32_WPAN/Target/hw_ipcc.c IPCC Driver + + +@par Hardware and Software environment + + - This example runs on STM32WB5MM-DK boards. + + +@par How to use it ? + +This application requires having the stm32wb5x_BLE_Stack_full_fw.bin binary flashed on the Wireless Coprocessor. +If it is not the case, you need to use STM32CubeProgrammer to load the appropriate binary. +All available binaries are located under /Projects/STM32_Copro_Wireless_Binaries directory. +Refer to UM2237 to learn how to use/install STM32CubeProgrammer. +Refer to /Projects/STM32_Copro_Wireless_Binaries/ReleaseNote.html for the detailed procedure to change the +Wireless Coprocessor binary. + +In order to make the program work, you must do the following: + - Open your preferred toolchain + - Rebuild all files and flash the board with the executable file + - Run the example + - to test the BLE Transparent Mode application, use the STM32CubeMonitor RF tool + - make the connection between STM32CubeMonitor RF tool and BLE_TransparentMode application + - send some ACI commands from STM32CubeMonitor RF tool as HCI_RESET, HCI_LE_RECEIVER_TEST, HCI_LE_TRANSMITTER_TEST, ... + - the application must acknowledge the command with a "Command Complete" answer + +For more details refer to the Application Note: + AN5289 - Building a Wireless application + + * <h3><center>© COPYRIGHT STMicroelectronics</center></h3> + */ +
\ No newline at end of file |