1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
|
# Parameters:
# instance.parameter=value #(type, mode) default = 'def value' : description : [min..max]
#----------------------------------------------------------------------------------------------
cpu0.FPU=1 # (bool , init-time) default = '1' : Set whether the model has VFP support
cpu0.DSP=1 # (bool , init-time) default = '1' : Set whether the model has the DSP extension
cpu0.semihosting-enable=0 # (bool , init-time) default = '1' : Enable semihosting SVC traps. Applications that do not use semihosting must set this parameter to false.
cpu0.MPU_S=0x8 # (int , init-time) default = '0x8' : Number of regions in the Secure MPU. If Security Extentions are absent, this is ignored : [0x0..0x10]
cpu0.MPU_NS=0x8 # (int , init-time) default = '0x8' : Number of regions in the Non-Secure MPU. If Security Extentions are absent, this is the total number of MPU regions : [0x0..0x10]
cpu0.ITM=0 # (bool , init-time) default = '1' : Level of instrumentation trace supported. false : No ITM trace included, true: ITM trace included
cpu0.IRQLVL=0x3 # (int , init-time) default = '0x3' : Number of bits of interrupt priority : [0x3..0x8]
cpu0.BIGENDINIT=0 # (bool , init-time) default = '0' : Initialize processor to big endian mode
cpu0.INITSVTOR=0x00000000 # (int , init-time) default = '0x10000000' : Secure vector-table offset at reset : [0x0..0xFFFFFF80]
cpu0.INITNSVTOR=0x0 # (int , init-time) default = '0x0' : Non-Secure vector-table offset at reset : [0x0..0xFFFFFF80]
cpu0.SAU=0x0 # (int , init-time) default = '0x4' : Number of SAU regions (0 => no SAU) : [0x0..0x8]
cpu0.SAU_CTRL.ENABLE=0 # (bool , init-time) default = '0' : Enable SAU at reset
cpu0.SAU_CTRL.ALLNS=0 # (bool , init-time) default = '0' : At reset, the SAU treats entire memory space as NS when the SAU is disabled if this is set
cpu0.NUM_IDAU_REGION=0x0 # (int , init-time) default = '0xA' :
cpu0.LOCK_SAU=0 # (bool , init-time) default = '0' : Lock down of SAU registers write
cpu0.LOCK_S_MPU=0 # (bool , init-time) default = '0' : Lock down of Secure MPU registers write
cpu0.LOCK_NS_MPU=0 # (bool , init-time) default = '0' : Lock down of Non-Secure MPU registers write
cpu0.CPIF=1 # (bool , init-time) default = '1' : Specifies whether the external coprocessor interface is included
cpu0.SECEXT=0 # (bool , init-time) default = '1' : Whether the ARMv8-M Security Extensions are included
fvp_mps2.DISABLE_GATING=1 # (bool , init-time) default = '0' : Disable Memory gating logic
fvp_mps2.NUM_IDAU_REGION=0x0 # (int , init-time) default = '0xA' :
fvp_mps2.SCC_ID.Variant=0x0 # (int , init-time) default = '0x0' : SCC_ID[23:20], X in the FGPA version 'rXpY' : [0x0..0xF]
fvp_mps2.SCC_ID.Revision=0x1 # (int , init-time) default = '0x1' : SCC_ID[3:0], Y in the FGPA version 'rXpY' : [0x0..0xF]
fvp_mps2.platform_type=0x0 # (int , init-time) default = '0x0' : 0:MPS2 ; 1:IoT Kit ; 2:Castor : [0x0..0x2]
fvp_mps2.extra_psram=0 # (bool , init-time) default = '0' : Increases PSRAM to 32Mb
fvp_mps2.UART2.out_file="" # (string, init-time) default = '' : Output file to hold data written by the UART (use '-' to send all output to stdout)
fvp_mps2.UART2.in_file="" # (string, init-time) default = '' : Input file for data to be read by the UART
fvp_mps2.UART2.unbuffered_output=0 # (bool , init-time) default = '0' : Unbuffered output
fvp_mps2.UART2.in_file_escape_sequence="##" # (string, init-time) default = '##' : Input file escape sequence
fvp_mps2.UART2.shutdown_on_eot=0 # (bool , init-time) default = '0' : Shutdown simulation when a EOT (ASCII 4) char is transmitted (useful for regression tests when semihosting is not available)
fvp_mps2.UART2.shutdown_tag="" # (string, run-time ) default = '' : Shutdown simulation when a string is transmitted
fvp_mps2.UART1.out_file="" # (string, init-time) default = '' : Output file to hold data written by the UART (use '-' to send all output to stdout)
fvp_mps2.UART1.in_file="" # (string, init-time) default = '' : Input file for data to be read by the UART
fvp_mps2.UART1.unbuffered_output=0 # (bool , init-time) default = '0' : Unbuffered output
fvp_mps2.UART1.in_file_escape_sequence="##" # (string, init-time) default = '##' : Input file escape sequence
fvp_mps2.UART1.shutdown_on_eot=0 # (bool , init-time) default = '0' : Shutdown simulation when a EOT (ASCII 4) char is transmitted (useful for regression tests when semihosting is not available)
fvp_mps2.UART1.shutdown_tag="" # (string, run-time ) default = '' : Shutdown simulation when a string is transmitted
fvp_mps2.mps2_visualisation.rate_limit-enable=1 # (bool , init-time) default = '1' : Rate limit simulation.
fvp_mps2.mps2_visualisation.disable-visualisation=0 # (bool , init-time) default = '0' : Enable/disable visualisation
fvp_mps2.mps2_visualisation.window_title="CLCD %cpu%" # (string, init-time) default = 'CLCD %cpu%' : Window title (%cpu% is replaced by cpu_name)
fvp_mps2.mps2_visualisation.idler.delay_ms=0x32 # (int , init-time) default = '0x32' : Determines the period, in milliseconds of real time, between gui_callback() calls.
fvp_mps2.telnetterminal0.mode="telnet" # (string, init-time) default = 'telnet' : Terminal initialisation mode
fvp_mps2.telnetterminal0.start_telnet=1 # (bool , init-time) default = '1' : Start telnet if nothing connected
fvp_mps2.telnetterminal0.start_port=0x1388 # (int , init-time) default = '0x1388' : Telnet TCP Port Number : [0x0..0xFFFFFFFF]
fvp_mps2.telnetterminal0.quiet=0 # (bool , init-time) default = '0' : Avoid output on stdout/stderr
fvp_mps2.telnetterminal0.terminal_command="" # (string, init-time) default = '' : Commandline to launch a terminal application and connect to the opened TCP port. Keywords %port and %title will be replaced with the opened port number and component name respectively. An empty string (default behaviour) will launch xterm (Linux) or telnet.exe (Windows)
fvp_mps2.telnetterminal1.mode="telnet" # (string, init-time) default = 'telnet' : Terminal initialisation mode
fvp_mps2.telnetterminal1.start_telnet=1 # (bool , init-time) default = '1' : Start telnet if nothing connected
fvp_mps2.telnetterminal1.start_port=0x1388 # (int , init-time) default = '0x1388' : Telnet TCP Port Number : [0x0..0xFFFFFFFF]
fvp_mps2.telnetterminal1.quiet=0 # (bool , init-time) default = '0' : Avoid output on stdout/stderr
fvp_mps2.telnetterminal1.terminal_command="" # (string, init-time) default = '' : Commandline to launch a terminal application and connect to the opened TCP port. Keywords %port and %title will be replaced with the opened port number and component name respectively. An empty string (default behaviour) will launch xterm (Linux) or telnet.exe (Windows)
fvp_mps2.telnetterminal2.mode="telnet" # (string, init-time) default = 'telnet' : Terminal initialisation mode
fvp_mps2.telnetterminal2.start_telnet=1 # (bool , init-time) default = '1' : Start telnet if nothing connected
fvp_mps2.telnetterminal2.start_port=0x1388 # (int , init-time) default = '0x1388' : Telnet TCP Port Number : [0x0..0xFFFFFFFF]
fvp_mps2.telnetterminal2.quiet=0 # (bool , init-time) default = '0' : Avoid output on stdout/stderr
fvp_mps2.telnetterminal2.terminal_command="" # (string, init-time) default = '' : Commandline to launch a terminal application and connect to the opened TCP port. Keywords %port and %title will be replaced with the opened port number and component name respectively. An empty string (default behaviour) will launch xterm (Linux) or telnet.exe (Windows)
fvp_mps2.PSRAM_M7.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size
fvp_mps2.PSRAM_M7.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.PSRAM_M7.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.UART0.out_file="" # (string, init-time) default = '' : Output file to hold data written by the UART (use '-' to send all output to stdout)
fvp_mps2.UART0.in_file="" # (string, init-time) default = '' : Input file for data to be read by the UART
fvp_mps2.UART0.unbuffered_output=0 # (bool , init-time) default = '0' : Unbuffered output
fvp_mps2.UART0.in_file_escape_sequence="##" # (string, init-time) default = '##' : Input file escape sequence
fvp_mps2.UART0.shutdown_on_eot=0 # (bool , init-time) default = '0' : Shutdown simulation when a EOT (ASCII 4) char is transmitted (useful for regression tests when semihosting is not available)
fvp_mps2.UART0.shutdown_tag="" # (string, run-time ) default = '' : Shutdown simulation when a string is transmitted
fvp_mps2.cmsdk_watchdog.simhalt=0 # (bool , run-time ) default = '0' : Halt on reset.
fvp_mps2.s32k_watchdog.simhalt=0 # (bool , run-time ) default = '0' : Halt on reset.
fvp_mps2.secure_watchdog.simhalt=0 # (bool , run-time ) default = '0' : Halt on reset.
fvp_mps2.nonsecure_watchdog.simhalt=0 # (bool , run-time ) default = '0' : Halt on reset.
fvp_mps2.PSRAM.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size
fvp_mps2.PSRAM.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.PSRAM.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.ssram2.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size
fvp_mps2.ssram2.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.ssram2.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.ssram1.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size
fvp_mps2.ssram1.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.ssram1.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.stub.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size
fvp_mps2.iotss_internal_sram0.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size
fvp_mps2.iotss_internal_sram0.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.iotss_internal_sram0.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.iotss_internal_sram1.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size
fvp_mps2.iotss_internal_sram1.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.iotss_internal_sram1.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.iotss_internal_sram2.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size
fvp_mps2.iotss_internal_sram2.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.iotss_internal_sram2.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.iotss_internal_sram3.size=0x100000000 # (int , init-time) default = '0x100000000' : Memory Size
fvp_mps2.iotss_internal_sram3.fill1=0xDFDFDFCF # (int , init-time) default = '0xDFDFDFCF' : Fill pattern 1, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.iotss_internal_sram3.fill2=0xCFDFDFDF # (int , init-time) default = '0xCFDFDFDF' : Fill pattern 2, initialise memory at start of simulation with alternating fill1, fill2 pattern
fvp_mps2.sys_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal
fvp_mps2.sys_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.cpu0core_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.cpu0dbg_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.cpu1core_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal
fvp_mps2.cpu1core_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.cpu1dbg_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal
fvp_mps2.cpu1dbg_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.crypto_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal
fvp_mps2.crypto_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.cordio_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal
fvp_mps2.cordio_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.dbg_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal
fvp_mps2.dbg_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.ram0_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal
fvp_mps2.ram0_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.ram1_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal
fvp_mps2.ram1_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.ram2_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal
fvp_mps2.ram2_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.ram3_ppu.use_active_signal=0 # (bool , init-time) default = '0' : Use device-active signal
fvp_mps2.ram3_ppu.revision="r0p0" # (string, init-time) default = 'r0p0' : Revision
fvp_mps2.smsc_91c111.enabled=0 # (bool , init-time) default = '0' : Host interface connection enabled
fvp_mps2.smsc_91c111.mac_address="00:02:f7:ef:5d:a2" # (string, init-time) default = '00:02:f7:ef:5d:a2' : Host/model MAC address
fvp_mps2.smsc_91c111.promiscuous=1 # (bool , init-time) default = '1' : Put host into promiscuous mode
fvp_mps2.hostbridge.interfaceName="ARM0" # (string, init-time) default = 'ARM0' : Host Interface
fvp_mps2.hostbridge.userNetworking=0 # (bool , init-time) default = '0' : Enable user-mode networking
fvp_mps2.hostbridge.userNetSubnet="172.20.51.0/24" # (string, init-time) default = '172.20.51.0/24' : Virtual subnet for user-mode networking
fvp_mps2.hostbridge.userNetPorts="" # (string, init-time) default = '' : Listening ports to expose in user-mode networking
fvp_mps2.secure_control_register_block.FLASH_BLOCK_CFG=0x3 # (int , init-time) default = '0x3' : Flash Block size configuration : [0x0..0x31]
fvp_mps2.secure_control_register_block.SRAM_BLOCK_CFG=0x3 # (int , init-time) default = '0x3' : SRAM Block size configuration : [0x0..0x31]
fvp_mps2.secure_control_register_block.FLASH_WATERMARK_SUPPORTED=1 # (bool , init-time) default = '1' : Flash Watermark supported
fvp_mps2.secure_control_register_block.SRAM_WATERMARK_SUPPORTED=1 # (bool , init-time) default = '1' : SRAM Watermark supported
fvp_mps2.exclusive_monitor_psram.enable_component=1 # (bool , init-time) default = '1' : Enable component
fvp_mps2.exclusive_monitor_psram.number_of_monitors=0x8 # (int , init-time) default = '0x8' : Number of monitors : [0x1..0xFFFFFFFF]
fvp_mps2.exclusive_monitor_psram.log2_granule_size=0x0 # (int , init-time) default = '0x0' : log2 of address granule size : [0x0..0xB]
fvp_mps2.exclusive_monitor_psram.monitor_non_excl_stores=0 # (bool , init-time) default = '0' : Monitor non-exclusive stores from the same master
fvp_mps2.exclusive_monitor_psram.match_secure_state=1 # (bool , init-time) default = '1' : Treat the secure state like an address bit
fvp_mps2.exclusive_monitor_psram.shareability_domain=0x3 # (int , init-time) default = '0x3' : Maximum shareability domain of interest, transactions outside of the domain will pass through un-monitored (0-non-shared, 1-inner, 2-outer, 3-system) : [0x0..0x3]
fvp_mps2.exclusive_monitor_psram.apply_access_width_criteria_to_non_excl_stores=1 # (bool , init-time) default = '1' : Apply the given exclusive store width matching criteria to non-exclusive stores
fvp_mps2.exclusive_monitor_zbtsram1.enable_component=1 # (bool , init-time) default = '1' : Enable component
fvp_mps2.exclusive_monitor_zbtsram1.number_of_monitors=0x8 # (int , init-time) default = '0x8' : Number of monitors : [0x1..0xFFFFFFFF]
fvp_mps2.exclusive_monitor_zbtsram1.log2_granule_size=0x0 # (int , init-time) default = '0x0' : log2 of address granule size : [0x0..0xB]
fvp_mps2.exclusive_monitor_zbtsram1.monitor_non_excl_stores=0 # (bool , init-time) default = '0' : Monitor non-exclusive stores from the same master
fvp_mps2.exclusive_monitor_zbtsram1.match_secure_state=1 # (bool , init-time) default = '1' : Treat the secure state like an address bit
fvp_mps2.exclusive_monitor_zbtsram1.shareability_domain=0x3 # (int , init-time) default = '0x3' : Maximum shareability domain of interest, transactions outside of the domain will pass through un-monitored (0-non-shared, 1-inner, 2-outer, 3-system) : [0x0..0x3]
fvp_mps2.exclusive_monitor_zbtsram1.apply_access_width_criteria_to_non_excl_stores=1 # (bool , init-time) default = '1' : Apply the given exclusive store width matching criteria to non-exclusive stores
fvp_mps2.exclusive_monitor_zbtsram2.enable_component=1 # (bool , init-time) default = '1' : Enable component
fvp_mps2.exclusive_monitor_zbtsram2.number_of_monitors=0x8 # (int , init-time) default = '0x8' : Number of monitors : [0x1..0xFFFFFFFF]
fvp_mps2.exclusive_monitor_zbtsram2.log2_granule_size=0x0 # (int , init-time) default = '0x0' : log2 of address granule size : [0x0..0xB]
fvp_mps2.exclusive_monitor_zbtsram2.monitor_non_excl_stores=0 # (bool , init-time) default = '0' : Monitor non-exclusive stores from the same master
fvp_mps2.exclusive_monitor_zbtsram2.match_secure_state=1 # (bool , init-time) default = '1' : Treat the secure state like an address bit
fvp_mps2.exclusive_monitor_zbtsram2.shareability_domain=0x3 # (int , init-time) default = '0x3' : Maximum shareability domain of interest, transactions outside of the domain will pass through un-monitored (0-non-shared, 1-inner, 2-outer, 3-system) : [0x0..0x3]
fvp_mps2.exclusive_monitor_zbtsram2.apply_access_width_criteria_to_non_excl_stores=1 # (bool , init-time) default = '1' : Apply the given exclusive store width matching criteria to non-exclusive stores
fvp_mps2.exclusive_monitor_iotss_internal_sram.enable_component=1 # (bool , init-time) default = '1' : Enable component
fvp_mps2.exclusive_monitor_iotss_internal_sram.number_of_monitors=0x8 # (int , init-time) default = '0x8' : Number of monitors : [0x1..0xFFFFFFFF]
fvp_mps2.exclusive_monitor_iotss_internal_sram.log2_granule_size=0x0 # (int , init-time) default = '0x0' : log2 of address granule size : [0x0..0xB]
fvp_mps2.exclusive_monitor_iotss_internal_sram.monitor_non_excl_stores=0 # (bool , init-time) default = '0' : Monitor non-exclusive stores from the same master
fvp_mps2.exclusive_monitor_iotss_internal_sram.match_secure_state=1 # (bool , init-time) default = '1' : Treat the secure state like an address bit
fvp_mps2.exclusive_monitor_iotss_internal_sram.shareability_domain=0x3 # (int , init-time) default = '0x3' : Maximum shareability domain of interest, transactions outside of the domain will pass through un-monitored (0-non-shared, 1-inner, 2-outer, 3-system) : [0x0..0x3]
fvp_mps2.exclusive_monitor_iotss_internal_sram.apply_access_width_criteria_to_non_excl_stores=1 # (bool , init-time) default = '1' : Apply the given exclusive store width matching criteria to non-exclusive stores
fvp_mps2.dma0_securitymodifier.behaviour_ns_to_s=0x0 # (int , init-time) default = '0x0' : Behaviour for NS transactions to S space : 0:block 1:transmit 2:convert to S
fvp_mps2.dma0_securitymodifier.behaviour_s_to_ns=0x0 # (int , init-time) default = '0x0' : Behaviour for S transactions to NS space : 0:block 1:transmit 2:convert to NS
fvp_mps2.dma1_securitymodifier.behaviour_ns_to_s=0x0 # (int , init-time) default = '0x0' : Behaviour for NS transactions to S space : 0:block 1:transmit 2:convert to S
fvp_mps2.dma1_securitymodifier.behaviour_s_to_ns=0x0 # (int , init-time) default = '0x0' : Behaviour for S transactions to NS space : 0:block 1:transmit 2:convert to NS
fvp_mps2.dma2_securitymodifier.behaviour_ns_to_s=0x0 # (int , init-time) default = '0x0' : Behaviour for NS transactions to S space : 0:block 1:transmit 2:convert to S
fvp_mps2.dma2_securitymodifier.behaviour_s_to_ns=0x0 # (int , init-time) default = '0x0' : Behaviour for S transactions to NS space : 0:block 1:transmit 2:convert to NS
fvp_mps2.dma3_securitymodifier.behaviour_ns_to_s=0x0 # (int , init-time) default = '0x0' : Behaviour for NS transactions to S space : 0:block 1:transmit 2:convert to S
fvp_mps2.dma3_securitymodifier.behaviour_s_to_ns=0x0 # (int , init-time) default = '0x0' : Behaviour for S transactions to NS space : 0:block 1:transmit 2:convert to NS
fvp_mps2.dma0.fifo_size=0x10 # (int , init-time) default = '0x10' : Channel FIFO size in bytes
fvp_mps2.dma0.max_transfer=0x100 # (int , init-time) default = '0x100' : Largest atomic transfer
fvp_mps2.dma0.generate_clear=0 # (bool , init-time) default = '0' : Generate clear response
fvp_mps2.dma0.activate_delay=0x0 # (int , init-time) default = '0x0' : request delay
fvp_mps2.dma1.fifo_size=0x10 # (int , init-time) default = '0x10' : Channel FIFO size in bytes
fvp_mps2.dma1.max_transfer=0x100 # (int , init-time) default = '0x100' : Largest atomic transfer
fvp_mps2.dma1.generate_clear=0 # (bool , init-time) default = '0' : Generate clear response
fvp_mps2.dma1.activate_delay=0x0 # (int , init-time) default = '0x0' : request delay
fvp_mps2.dma2.fifo_size=0x10 # (int , init-time) default = '0x10' : Channel FIFO size in bytes
fvp_mps2.dma2.max_transfer=0x100 # (int , init-time) default = '0x100' : Largest atomic transfer
fvp_mps2.dma2.generate_clear=0 # (bool , init-time) default = '0' : Generate clear response
fvp_mps2.dma2.activate_delay=0x0 # (int , init-time) default = '0x0' : request delay
fvp_mps2.dma3.fifo_size=0x10 # (int , init-time) default = '0x10' : Channel FIFO size in bytes
fvp_mps2.dma3.max_transfer=0x100 # (int , init-time) default = '0x100' : Largest atomic transfer
fvp_mps2.dma3.generate_clear=0 # (bool , init-time) default = '0' : Generate clear response
fvp_mps2.dma3.activate_delay=0x0 # (int , init-time) default = '0x0' : request delay
fvp_mps2.iotss_systemcontrol.cpu0wait=0 # (bool , init-time) default = '0' : Whether to hold cpu1 in reset at boot
fvp_mps2.iotss_systemcontrol.cpu1wait=1 # (bool , init-time) default = '1' : Whether to hold cpu1 in reset at boot
fvp_mps2.iotss_cpuidentity.debugger_master_id=0xFFFFFFFF # (int , init-time) default = '0xFFFFFFFF' : : [0x0..0xFFFFFFFF]
#----------------------------------------------------------------------------------------------
|
