1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
|
/**
@page WWDG_RefreshUntilUserEvent_Init WWDG example
@verbatim
******************************************************************************
* @file Examples_LL/WWDG/WWDG_RefreshUntilUserEvent_Init/readme.txt
* @author MCD Application Team
* @brief Description of the WWDG_RefreshUntilUserEvent_Init example.
******************************************************************************
*
* Copyright (c) 2019 STMicroelectronics. All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
@endverbatim
@par Example Description
Configuration of the WWDG to periodically update the counter and
generate an MCU WWDG reset when a user button is pressed. The peripheral initialization
uses the LL unitary service functions for optimization purposes (performance and size).
Example Configuration:
Configure the WWDG (Window, Prescaler & Counter) and enable it.
Refresh the WWDG downcounter in the main loop - LED2 is blinking fastly & continuously
Example Execution:
When User push-button (SW1) is pressed, the Downcounter automatic refresh mechanism is disable and thus, reset will occur.
After a reset when re-entering in the main, RCC WWDG Reset Flag will be checked and if we are back from a WWDG reset the LED2 will be switch ON.
Waiting a new User push-button (SW1) pressed to re-activate the WWDG
@par Keywords
System, WWDG, Timeout, Refresh, Counter update, MCU Reset, Downcounter, Event, Window
@par Directory contents
- WWDG/WWDG_RefreshUntilUserEvent_Init/Inc/stm32wbxx_it.h Interrupt handlers header file
- WWDG/WWDG_RefreshUntilUserEvent_Init/Inc/main.h Header for main.c module
- WWDG/WWDG_RefreshUntilUserEvent_Init/Inc/stm32_assert.h Template file to include assert_failed function
- WWDG/WWDG_RefreshUntilUserEvent_Init/Src/stm32wbxx_it.c Interrupt handlers
- WWDG/WWDG_RefreshUntilUserEvent_Init/Src/main.c Main program
- WWDG/WWDG_RefreshUntilUserEvent_Init/Src/system_stm32wbxx.c STM32WBxx system source file
@par Hardware and Software environment
- This example runs on STM32WB15CCUx devices.
- This example has been tested with NUCLEO-WB15CC board and can be
easily tailored to any other supported device and development board.
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
*/
|
