1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
|
/**
@page BLE_p2pServer Application
@verbatim
******************************************************************************
* @file BLE/BLE_p2pServer/readme.txt
* @author MCD Application Team
* @brief Description of the BLE_p2pServer application
******************************************************************************
*
* Copyright (c) 2019-2021 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@endverbatim
@par Application Description
How to demonstrate Point-to-Point communication using BLE component (as GATT server).
Two STM32WB55xx boards are used, one acting as GATT client, and one as GATT server.
For example, BLE_P2PClient application is downloaded in a USB DONGLE board (MB1293C) and BLE_p2pServer application in a Nucleo board (MB1355C).
The client could be located in a phone also, using the ST BLE Sensor application instead of the MB1293C board.
@par Keywords
Connectivity, BLE, IPCC, HSEM, RTC, UART, PWR, BLE protocol, BLE pairing, BLE profile, Dual core
@par Directory contents
- BLE/BLE_p2pServer/Core/Inc/stm32wbxx_hal_conf.h HAL configuration file
- BLE/BLE_p2pServer/Core/Inc/stm32wbxx_it.h Interrupt handlers header file
- BLE/BLE_p2pServer/Core/Inc/main.h Header for main.c module
- BLE/BLE_p2pServer/STM32_WPAN/App/app_ble.h Header for app_ble.c module
- BLE/BLE_p2pServer/Core/Inc/app_common.h Header for all modules with common definition
- BLE/BLE_p2pServer/Core/Inc/app_conf.h Parameters configuration file of the application
- BLE/BLE_p2pServer/Core/Inc/app_entry.h Parameters configuration file of the application
- BLE/BLE_p2pServer/STM32_WPAN/App/ble_conf.h BLE Services configuration
- BLE/BLE_p2pServer/STM32_WPAN/App/ble_dbg_conf.h BLE Traces configuration of the BLE services
- BLE/BLE_p2pServer/STM32_WPAN/App/p2p_server_app.h Header for p2p_server_app.c module
- BLE/BLE_p2pServer/Core/Inc/hw_conf.h Configuration file of the HW
- BLE/BLE_p2pServer/Core/Inc/utilities_conf.h Configuration file of the utilities
- BLE/BLE_p2pServer/Core/Src/stm32wbxx_it.c Interrupt handlers
- BLE/BLE_p2pServer/Core/Src/main.c Main program
- BLE/BLE_p2pServer/Core/Src/system_stm32wbxx.c stm32wbxx system source file
- BLE/BLE_p2pServer/STM32_WPAN/App/app_ble.c BLE Profile implementation
- BLE/BLE_p2pServer/Core/Src/app_entry.c Initialization of the application
- BLE/BLE_p2pServer/STM32_WPAN/App/p2p_server_app.c P2P Server application
- BLE/BLE_p2pServer/STM32_WPAN/Target/hw_ipcc.c IPCC Driver
- BLE/BLE_p2pServer/Core/Src/stm32_lpm_if.c Low Power Manager Interface
- BLE/BLE_p2pServer/Core/Src/hw_timerserver.c Timer Server based on RTC
- BLE/BLE_p2pServer/Core/Src/hw_uart.c UART Driver
@par Hardware and Software environment
- This application runs on STM32WB55xx devices, USB DONGLE board (MB1293C) & Nucleo board (MB1355C)
- USB DONGLE board (MB1293C) Set-up
- Connect the USB DONGLE boards to your PC
- Connect external ST-LINK to dedicated ST LINK Pin
- Nucleo board (MB1355C) Set-up
- Connect the Nucleo Board to your PC with a USB cable type A to mini-B to ST-LINK connector (USB_STLINK).
- Please ensure that the ST-LINK connectors and jumpers are fitted.
@par How to use it ?
This application requires having the stm32wb5x_BLE_Stack_full_fw.bin binary flashed on the Wireless Coprocessor.
If it is not the case, you need to use STM32CubeProgrammer to load the appropriate binary.
All available binaries are located under /Projects/STM32_Copro_Wireless_Binaries directory.
Refer to UM2237 to learn how to use/install STM32CubeProgrammer.
Refer to /Projects/STM32_Copro_Wireless_Binaries/ReleaseNote.html for the detailed procedure to change the
Wireless Coprocessor binary.
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load the image into Target memory
- OR use the BLE_p2pServer_reference.hex from Binary directory
- This must be done for BLE_p2pServer (MB1355C & MB1293C)
First demonstration
On the android/ios device, enable the Bluetooth communications, and if not done before,
- Install the ST BLE Profile application on the android device
https://play.google.com/store/apps/details?id=com.stm.bluetoothlevalidation&hl=en
https://itunes.apple.com/fr/App/st-ble-profile/id1081331769?mt=8
- Install the ST BLE Sensor application on the ios/android device
https://play.google.com/store/apps/details?id=com.st.bluems
https://itunes.apple.com/us/App/st-bluems/id993670214?mt=8
- Power on the Nucleo board with the BLE_P2P_Server application
- Then, click on the App icon, ST BLE Sensor (android device)
- connect to the device
- select the P2PSRVx in the device list and play with the Light and the SW1 button of the board
Second demonstration
- BLE_p2pServer may be connected by BLE_p2pClient.
- Once the code (BLE_p2pServer & BLE_p2pClient) is downloaded into the two STM32WB55xx boards and executed, the modules are initialized.
- The Peripheral device (BLE_p2pServer) starts advertising (during 1 minute), the green led blinks for each advertising event.
- The Central device (BLE_p2pClient) starts scanning when pressing the User button (SW1) on the USB Dongle board.
- BLE_p2pClient blue led becomes on.
- Scan req takes about 5 seconds.
- Make sure BLE_p2pServer advertises, if not press reset button or switch off/on to restart advertising.
- Then, it automatically connects to the BLE_p2pServer.
- Blue led turns off and green led starts blinking as on the MB1355C. Connection is done.
- When pressing SW1 on a board, the blue led toggles on the other one.
- The SW1 button can be pressed independently on the GATT Client or on the GATT Server.
- When the server is located on a MB1355C, the connection interval can be modified from 50ms to 1s and vice-versa using SW2.
- The green led on the 2 boards blinks for each advertising event, it means quickly when 50ms and slowly when 1s.
- Passing from 50ms to 1s is instantaneous, but from 1s to 50ms takes around 10 seconds.
- The SW1 event, switch on/off blue led, depends on the connection Interval event.
- So the delay from SW1 action and blue led change is more or less fast.
For more details refer to the Application Note:
AN5289 - Building a Wireless application
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
*/
|