1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
|
/**
@page RTC_Alarm_Init RTC example
@verbatim
******************************************************************************
* @file Examples_LL/RTC/RTC_Alarm_Init/readme.txt
* @author MCD Application Team
* @brief Description of the RTC example.
******************************************************************************
*
* Copyright (c) 2019 STMicroelectronics. All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
@endverbatim
@par Example Description
Configuration of the RTC LL API to configure and generate an alarm using the RTC peripheral. The peripheral
initialization uses the LL initialization function.
In this example, after start-up, SYSCLK is configured to the max frequency using the PLL with
MSI as clock source.
The RTC peripheral configuration is ensured by the Configure_RTC() function
(configure of the needed RTC resources according to the used hardware CLOCK,
PWR, RTC clock source and BackUp). You may update this function to change RTC configuration.
@note LSE oscillator clock is used as RTC clock source by default.
The user can use also LSI as RTC clock source. The user uncomment the adequate
line on the main.c file.
@code
#define RTC_CLOCK_SOURCE_LSE
/* #define RTC_CLOCK_SOURCE_LSI */
@endcode
LSI oscillator clock is delivered by a 32 kHz RC.
LSE (when available on board) is delivered by a 32.768 kHz crystal.
Configure_RTC_Alarm function is then called to initialize the
time, date and alarm.
In this example, the Time is set to 11:59:55 PM and the Alarm must be generated after
30 seconds on 12:00:25 AM.
LED2 is turned ON when the RTC Alarm is generated correctly.
The current time and date are updated and displayed on the debugger in aShowTime
and aShowDate variables (watch or live watch).
In case of error, LED3 is toggling.
@par Keywords
System, RTC, Alarm, wakeup timer, Backup domain, Counter, LSE, LSI
@par Directory contents
- RTC/RTC_Alarm_Init/Inc/stm32wbxx_it.h Interrupt handlers header file
- RTC/RTC_Alarm_Init/Inc/main.h Header for main.c module
- RTC/RTC_Alarm_Init/Inc/stm32_assert.h Template file to include assert_failed function
- RTC/RTC_Alarm_Init/Src/stm32wbxx_it.c Interrupt handlers
- RTC/RTC_Alarm_Init/Src/main.c Main program
- RTC/RTC_Alarm_Init/Src/system_stm32wbxx.c STM32WBxx system source file
@par Hardware and Software environment
- This example runs on STM32WB55xx devices.
- This example has been tested with P-NUCLEO-WB55 board and can be
easily tailored to any other supported device and development board.
@par How to use it ?
In order to make the program work, you must do the following :
- Open your preferred toolchain
- Rebuild all files and load your image into target memory
- Run the example
* <h3><center>© COPYRIGHT STMicroelectronics</center></h3>
*/
|
