diff options
author | IvDm <43366555+IvDm@users.noreply.github.com> | 2018-09-30 23:41:37 +0300 |
---|---|---|
committer | GitHub <noreply@github.com> | 2018-09-30 23:41:37 +0300 |
commit | 7660de83a8014d3a148ebaca8296a6e6fe1f214d (patch) | |
tree | 52845e05914bb135dc1d419b7c94c6329daf6a8b /README.md | |
parent | 14f39443cc1505b8009778fbb0f15343c48c1e59 (diff) |
Update README.md
Diffstat (limited to 'README.md')
-rw-r--r-- | README.md | 2 |
1 files changed, 1 insertions, 1 deletions
@@ -1,6 +1,6 @@ # Z-probe-on-smd-resistors-2512 This project is based on a change in the resistance of resistors under the influence of external factors in particular deformation. The object of the project is to check whether it is possible to use ordinary smd resistors instead of strain gages, and apply this effect to the calibration of the bed 3d printer. - To implement the project I needed: 4 smd resistor with a resistance of 1 kOhm size 2512, ADC HX711, microcontroller ATtiny 85,pnp transistor bc 807-40 sot23,resistors of size 0805 with a rating of 8.2 kΩ 1 pcs., 22 kΩ 1 pcs., 2.2 kΩ 1 pcs.,capacitors 0805 with a capacity of 4.7u 1pcs, 1u 1pcs, 100n 1pcs, LED 0603 any color 1pcs.,double sided copper clad plate PCB, 3d printer for making plastic parts.Library for the HX711 from here: https://github.com/bogde/HX711 + To implement the project I needed: 4 smd resistor with a resistance of 1 kOhm size 2512, ADC HX711, microcontroller ATtiny 85,pnp transistor bc 807-40 sot23,resistors of size 0805 with a rating of 8.2 kΩ 1 pcs., 22 kΩ 1 pcs., 2.2 kΩ 1 pcs.,capacitors 0805 with a capacity of 4.7u 1pcs, 1u 2pcs, 100n 1pcs, LED 0603 any color 1pcs.,double sided copper clad plate PCB, 3d printer for making plastic parts.Library for the HX711 from here: https://github.com/bogde/HX711 As a result, on a double-sided printed circuit board such a sensor was made: |