diff options
| author | Scott Lahteine <thinkyhead@users.noreply.github.com> | 2022-07-17 07:10:35 +0300 |
|---|---|---|
| committer | Scott Lahteine <thinkyhead@users.noreply.github.com> | 2022-07-17 07:10:35 +0300 |
| commit | 57b27fb3f95527b8a0f16af400b82edd1ce434bd (patch) | |
| tree | 2673d32f98d1d488a986827803aa99c6f2ee9255 | |
| parent | 715c44f43367b1e47d49cca64d7371e4a07d0907 (diff) | |
📝 ESP32 comments
277 files changed, 831 insertions, 0 deletions
diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h index fcc976dd52..e827d6472f 100644 --- a/config/default/Configuration_adv.h +++ b/config/default/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h index b45561f790..2314b93a64 100644 --- a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h +++ b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h index c664659bd2..a01efc5909 100644 --- a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h index 9528845f9e..dc80690c50 100644 --- a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h +++ b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h index 7ab922abb6..1f3bacbfa6 100644 --- a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h +++ b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h @@ -3482,6 +3482,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h index 056626b7e6..5c71d4d139 100644 --- a/config/examples/Alfawise/U20/Configuration_adv.h +++ b/config/examples/Alfawise/U20/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h index 422d4eb3ba..a5d254ce68 100644 --- a/config/examples/AliExpress/UM2pExt/Configuration_adv.h +++ b/config/examples/AliExpress/UM2pExt/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h index 873d58d6c2..89c9f0f20e 100644 --- a/config/examples/Anet/A2/Configuration_adv.h +++ b/config/examples/Anet/A2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h index 873d58d6c2..89c9f0f20e 100644 --- a/config/examples/Anet/A2plus/Configuration_adv.h +++ b/config/examples/Anet/A2plus/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h index 3e2f73e51d..9f27ed3587 100644 --- a/config/examples/Anet/A6/Configuration_adv.h +++ b/config/examples/Anet/A6/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h index 9da3bf051e..b33b9d4ee4 100644 --- a/config/examples/Anet/A8/Configuration_adv.h +++ b/config/examples/Anet/A8/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h index 783f5ec57f..02da206539 100644 --- a/config/examples/Anet/A8plus/Configuration_adv.h +++ b/config/examples/Anet/A8plus/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h index 7d141a2f34..ebf6218024 100644 --- a/config/examples/Anet/A9/Configuration_adv.h +++ b/config/examples/Anet/A9/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h index 416cab1a39..129d735e02 100644 --- a/config/examples/Anet/E10/Configuration_adv.h +++ b/config/examples/Anet/E10/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h index 7f1861cb50..1e76dbb294 100644 --- a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h +++ b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h index 4974b29faf..98cbfdfd7b 100644 --- a/config/examples/Anet/E16/Stock/Configuration_adv.h +++ b/config/examples/Anet/E16/Stock/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h index dae6021fe8..e57cef4199 100644 --- a/config/examples/Anet/ET4+/Configuration_adv.h +++ b/config/examples/Anet/ET4+/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h index dae6021fe8..e57cef4199 100644 --- a/config/examples/Anet/ET4-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET4-Pro/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/ET4/Configuration_adv.h b/config/examples/Anet/ET4/Configuration_adv.h index 0aedb0fb13..d7de0089ab 100644 --- a/config/examples/Anet/ET4/Configuration_adv.h +++ b/config/examples/Anet/ET4/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/ET4X/Configuration_adv.h b/config/examples/Anet/ET4X/Configuration_adv.h index 0aedb0fb13..d7de0089ab 100644 --- a/config/examples/Anet/ET4X/Configuration_adv.h +++ b/config/examples/Anet/ET4X/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/ET5-Pro/Configuration_adv.h b/config/examples/Anet/ET5-Pro/Configuration_adv.h index b87ec25d8f..dd804cbf2d 100644 --- a/config/examples/Anet/ET5-Pro/Configuration_adv.h +++ b/config/examples/Anet/ET5-Pro/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/ET5/Configuration_adv.h b/config/examples/Anet/ET5/Configuration_adv.h index b87ec25d8f..dd804cbf2d 100644 --- a/config/examples/Anet/ET5/Configuration_adv.h +++ b/config/examples/Anet/ET5/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Anet/ET5X/Configuration_adv.h b/config/examples/Anet/ET5X/Configuration_adv.h index b87ec25d8f..dd804cbf2d 100644 --- a/config/examples/Anet/ET5X/Configuration_adv.h +++ b/config/examples/Anet/ET5X/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h index 5166c8c21e..9885f0333b 100644 --- a/config/examples/AnyCubic/Chiron/Configuration_adv.h +++ b/config/examples/AnyCubic/Chiron/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h index 9e3883985a..25932a6307 100644 --- a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h index 4f2ee1da4a..d68635a092 100644 --- a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h index 55d070b255..c322ced2e4 100644 --- a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h +++ b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h index 5da82d0faa..2dfe144fe8 100644 --- a/config/examples/AnyCubic/i3 Mega/Configuration_adv.h +++ b/config/examples/AnyCubic/i3 Mega/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/AnyCubic/i3/Configuration_adv.h b/config/examples/AnyCubic/i3/Configuration_adv.h index a8ee6033fe..65e1529d94 100644 --- a/config/examples/AnyCubic/i3/Configuration_adv.h +++ b/config/examples/AnyCubic/i3/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/ArmEd/Configuration_adv.h b/config/examples/ArmEd/Configuration_adv.h index a2cefa00c1..2319d945f9 100644 --- a/config/examples/ArmEd/Configuration_adv.h +++ b/config/examples/ArmEd/Configuration_adv.h @@ -3477,6 +3477,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Artillery/Genius Pro/Configuration_adv.h b/config/examples/Artillery/Genius Pro/Configuration_adv.h index 2ddd6ed23a..f5bdd0d30e 100644 --- a/config/examples/Artillery/Genius Pro/Configuration_adv.h +++ b/config/examples/Artillery/Genius Pro/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h index da24468c9b..ab100f11d7 100644 --- a/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h +++ b/config/examples/Artillery/Genius/BLTouch/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Artillery/Genius/V1/Configuration_adv.h b/config/examples/Artillery/Genius/V1/Configuration_adv.h index c131c83853..6b4d985378 100644 --- a/config/examples/Artillery/Genius/V1/Configuration_adv.h +++ b/config/examples/Artillery/Genius/V1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Artillery/Hornet/Configuration_adv.h b/config/examples/Artillery/Hornet/Configuration_adv.h index 845809dec9..5b63def55a 100644 --- a/config/examples/Artillery/Hornet/Configuration_adv.h +++ b/config/examples/Artillery/Hornet/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h index cac6eba5d2..bc0e95a582 100644 --- a/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/0.9 BMG - E3D V6/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h index c131c83853..6b4d985378 100644 --- a/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X1/V1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h index 2d159246dc..b64ff2f6c0 100644 --- a/config/examples/Artillery/Sidewinder X2/Configuration_adv.h +++ b/config/examples/Artillery/Sidewinder X2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h index c3bdc2d4ac..ae9e22f737 100644 --- a/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/BIBO/TouchX/default/Configuration_adv.h b/config/examples/BIBO/TouchX/default/Configuration_adv.h index 071beafa6b..d3d61845f6 100644 --- a/config/examples/BIBO/TouchX/default/Configuration_adv.h +++ b/config/examples/BIBO/TouchX/default/Configuration_adv.h @@ -3465,6 +3465,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h index 1f1667aacc..e29a25cc12 100644 --- a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h index 0ac6426228..871b7c1f44 100644 --- a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h +++ b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h index 8d88af8630..2b37231e78 100644 --- a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h +++ b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/BIQU/BX/Configuration_adv.h b/config/examples/BIQU/BX/Configuration_adv.h index 378a991f1f..461d30029c 100644 --- a/config/examples/BIQU/BX/Configuration_adv.h +++ b/config/examples/BIQU/BX/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/BIQU/Thunder Standard/Configuration_adv.h b/config/examples/BIQU/Thunder Standard/Configuration_adv.h index d3a783b257..8da70d1fc4 100644 --- a/config/examples/BIQU/Thunder Standard/Configuration_adv.h +++ b/config/examples/BIQU/Thunder Standard/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/BQ/Hephestos/Configuration_adv.h b/config/examples/BQ/Hephestos/Configuration_adv.h index 5b321652bd..519d34c1d9 100644 --- a/config/examples/BQ/Hephestos/Configuration_adv.h +++ b/config/examples/BQ/Hephestos/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/BQ/Hephestos_2/Configuration_adv.h b/config/examples/BQ/Hephestos_2/Configuration_adv.h index c2b7dab649..f99677f2d2 100644 --- a/config/examples/BQ/Hephestos_2/Configuration_adv.h +++ b/config/examples/BQ/Hephestos_2/Configuration_adv.h @@ -3480,6 +3480,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/BQ/WITBOX/Configuration_adv.h b/config/examples/BQ/WITBOX/Configuration_adv.h index 5b321652bd..519d34c1d9 100644 --- a/config/examples/BQ/WITBOX/Configuration_adv.h +++ b/config/examples/BQ/WITBOX/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/CTC/A13/Configuration_adv.h b/config/examples/CTC/A13/Configuration_adv.h index e45de02de1..83cb7a4667 100644 --- a/config/examples/CTC/A13/Configuration_adv.h +++ b/config/examples/CTC/A13/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/CTC/Bizer/Configuration_adv.h b/config/examples/CTC/Bizer/Configuration_adv.h index 5ec614972f..663d2c6f8a 100644 --- a/config/examples/CTC/Bizer/Configuration_adv.h +++ b/config/examples/CTC/Bizer/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Cartesio/Configuration_adv.h b/config/examples/Cartesio/Configuration_adv.h index ee527f4b68..b83985aeb3 100644 --- a/config/examples/Cartesio/Configuration_adv.h +++ b/config/examples/Cartesio/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index c46504afbc..5c06e4bd5e 100644 --- a/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h index dcf6ca1fc4..abdb996435 100644 --- a/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/CrealityV1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h index 2b7bc8e13c..27629dcd7f 100644 --- a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h index dc9f972610..8600a86a4d 100644 --- a/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S4/CrealityV1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h index 2d737f48b5..ccc09920d2 100644 --- a/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/BigTreeTech SKR Mini E3 1.2 with TFT35 E3 V3.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h index dc9f972610..8600a86a4d 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h index f2044bda34..e0fdc32a61 100644 --- a/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h +++ b/config/examples/Creality/CR-10 S5/CrealityV2.2-BLTouch/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h index 3f01fc403c..2a2ac02273 100644 --- a/config/examples/Creality/CR-10 V2/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V2/Configuration_adv.h @@ -3478,6 +3478,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h index b228a0a3e9..d129cb5af0 100644 --- a/config/examples/Creality/CR-10 V3/Configuration_adv.h +++ b/config/examples/Creality/CR-10 V3/Configuration_adv.h @@ -3480,6 +3480,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 579d2f8c2a..ee8b864346 100644 --- a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h index ecb4db9755..49bc0794ff 100644 --- a/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10/CrealityV1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h index ea8d41fe2a..fedbaaccb7 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 1.4 Turbo TMC2209/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h index 961c07ed66..a2de64bd3f 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR 2.0 TMC2209/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a7ba14bafb..5fb5b286b1 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h index 4e0d970d42..c629c79d93 100644 --- a/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/BigTreeTech SKR Pro v1.2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h index 4b37e524da..a2f1d0e270 100644 --- a/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/CR-10S/CrealityV1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-20 Pro/Configuration_adv.h b/config/examples/Creality/CR-20 Pro/Configuration_adv.h index 2fb94441dc..9468ab0615 100644 --- a/config/examples/Creality/CR-20 Pro/Configuration_adv.h +++ b/config/examples/Creality/CR-20 Pro/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-20/Configuration_adv.h b/config/examples/Creality/CR-20/Configuration_adv.h index d6fd665289..5a215c9af5 100644 --- a/config/examples/Creality/CR-20/Configuration_adv.h +++ b/config/examples/Creality/CR-20/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h index 66e46f9246..ddf3c9b9b6 100644 --- a/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h +++ b/config/examples/Creality/CR-30 PrintMill/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT true // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/CR-8/Configuration_adv.h b/config/examples/Creality/CR-8/Configuration_adv.h index 40c9aff27e..3d555c02e8 100644 --- a/config/examples/Creality/CR-8/Configuration_adv.h +++ b/config/examples/Creality/CR-8/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h index b9a23b90e1..68e2917f69 100644 --- a/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h +++ b/config/examples/Creality/Ender-2 Pro/CrealityV423/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-2/Configuration_adv.h b/config/examples/Creality/Ender-2/Configuration_adv.h index 59ea4b26fe..73852616fb 100644 --- a/config/examples/Creality/Ender-2/Configuration_adv.h +++ b/config/examples/Creality/Ender-2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 Max/Configuration_adv.h b/config/examples/Creality/Ender-3 Max/Configuration_adv.h index fa34ac4d0b..bc8ba83a6f 100644 --- a/config/examples/Creality/Ender-3 Max/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Max/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h index 47e94751d6..a5d937ebb1 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR 1.4 Turbo/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 6863dc3de2..1c90917d91 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index f55d3e4ded..f3b1151937 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index a6f2316be1..75fd897b4e 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 89bd41270a..a847ee3e44 100644 --- a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h index e5c79c6f43..8a05096e69 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h index b9430f0650..ccb3a10fe5 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV422/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h index 103b516e07..ef8a09ad50 100644 --- a/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 Pro/CrealityV427/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 S1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/Configuration_adv.h index 9c1d94f8b2..ff9e0eac47 100644 --- a/config/examples/Creality/Ender-3 S1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 S1/Configuration_adv.h @@ -3468,6 +3468,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h index eb03515312..90df6b20e9 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/CrealityUI/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h index 5f91f4d42b..c40b0d6cc6 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR E3 Turbo/MarlinUI/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h index 3865def6d3..7f8d01121d 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/CrealityUI/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h index 6057b11a63..428f76364e 100644 --- a/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/BigTreeTech SKR Mini E3 v3/MarlinUI/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h index 60d2a2dc63..8fc399ec23 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/CrealityUI/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h index 5d8ef554c0..6d98727680 100644 --- a/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h +++ b/config/examples/Creality/Ender-3 V2/CrealityV422/MarlinUI/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h index e3c7befd84..4235e64287 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h index 9ae8f99ac6..6fa012073f 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR 1.4/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h index 431ad2bc6e..1450a59927 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h index 7128e64e10..8a647c3afa 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h index 431ad2bc6e..1450a59927 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h index 2b3d31b9b5..604c971707 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR E3-DIP V1.1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h index 2be7fa20c1..2de8d6e48d 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index adceeb5a54..46d8667baa 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 878ad0a37f..a0b947c336 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h index 0ef0af6e30..81e0355fad 100644 --- a/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h index 4b3ec6e56b..0eabab926b 100644 --- a/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h index 3eac180014..22682c01ea 100644 --- a/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV422/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h index 6beb58a7fe..66ebe7d225 100644 --- a/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/CrealityV427/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h index 3dadb419ee..1af4f5f133 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/BLTouch/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h index 3dadb419ee..1af4f5f133 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 1.2/base/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h index ba59c8c698..b4ec2e970b 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah 2.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h index 3dadb419ee..1af4f5f133 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/BLTouch/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h index 3dadb419ee..1af4f5f133 100644 --- a/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/FYSETC Cheetah/base/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h index c7579022f0..5f9c5c12fd 100644 --- a/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MEEB-3DP/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h index c8b2b7f867..71775eee50 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h index 7d677245c3..dd05c1abbd 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3/V1.1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h index 6446f7098f..1874163c78 100644 --- a/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/MKS Robin E3P/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h index e209bb2091..de4d290fd4 100644 --- a/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h +++ b/config/examples/Creality/Ender-3/TH3D EZBoard Lite V2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-4/Configuration_adv.h b/config/examples/Creality/Ender-4/Configuration_adv.h index efeb49b57c..a4c9d4b8db 100644 --- a/config/examples/Creality/Ender-4/Configuration_adv.h +++ b/config/examples/Creality/Ender-4/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h index 4cd388c6fc..a767bbccf3 100644 --- a/config/examples/Creality/Ender-5 Plus/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Plus/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h index b5bee4676f..ceee527e14 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index 67d671d79a..9680780e18 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h index e268e91eec..3c2b5a5198 100644 --- a/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/BigTreeTech SKR Mini E3 2.0 with BLTouch/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h index f36ee732c4..2aa8a54ec9 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h index 015f224c55..519dc31ec8 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV422/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h index 015f224c55..519dc31ec8 100644 --- a/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5 Pro/CrealityV427/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h index b5bee4676f..ceee527e14 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo with BLTouch/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 03d7cfe245..20e08b9061 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h index adceeb5a54..46d8667baa 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index 223e562cb1..30a69758b5 100644 --- a/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h index 5a51f54530..1d3db799ed 100644 --- a/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h index 30b772c037..9bd89adef7 100644 --- a/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h +++ b/config/examples/Creality/Ender-5/CrealityV427/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Creality/Ender-6/Configuration_adv.h b/config/examples/Creality/Ender-6/Configuration_adv.h index 1382a633f1..7bbffd9d13 100644 --- a/config/examples/Creality/Ender-6/Configuration_adv.h +++ b/config/examples/Creality/Ender-6/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h index f04bea03ba..5ac371aeba 100644 --- a/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h +++ b/config/examples/Dagoma/Disco Ultimate/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Daycom/3DP-100/Configuration_adv.h b/config/examples/Daycom/3DP-100/Configuration_adv.h index 7141d854af..2103ad71cc 100644 --- a/config/examples/Daycom/3DP-100/Configuration_adv.h +++ b/config/examples/Daycom/3DP-100/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h index a016642a1b..ae3f12cb12 100644 --- a/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h +++ b/config/examples/EXP3D/Imprimante multifonction/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h index dd5b5cc40e..cf50b59975 100644 --- a/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h +++ b/config/examples/EasyThreeD/ET4000PLUS/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Einstart-S/Configuration_adv.h b/config/examples/Einstart-S/Configuration_adv.h index fdb9634ed2..63a060b6a6 100644 --- a/config/examples/Einstart-S/Configuration_adv.h +++ b/config/examples/Einstart-S/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Elegoo/Neptune 2/Configuration_adv.h b/config/examples/Elegoo/Neptune 2/Configuration_adv.h index 2ed5d8b54e..a7401a596e 100644 --- a/config/examples/Elegoo/Neptune 2/Configuration_adv.h +++ b/config/examples/Elegoo/Neptune 2/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Eryone/Thinker SE/Configuration_adv.h b/config/examples/Eryone/Thinker SE/Configuration_adv.h index 98c1262543..89663d201a 100644 --- a/config/examples/Eryone/Thinker SE/Configuration_adv.h +++ b/config/examples/Eryone/Thinker SE/Configuration_adv.h @@ -3478,6 +3478,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Eryone/Thinker V2/Configuration_adv.h b/config/examples/Eryone/Thinker V2/Configuration_adv.h index aca759122f..37c86c535f 100644 --- a/config/examples/Eryone/Thinker V2/Configuration_adv.h +++ b/config/examples/Eryone/Thinker V2/Configuration_adv.h @@ -3478,6 +3478,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/FYSETC/AIO_II/Configuration_adv.h b/config/examples/FYSETC/AIO_II/Configuration_adv.h index 472865f0a8..d8ed72c0e8 100644 --- a/config/examples/FYSETC/AIO_II/Configuration_adv.h +++ b/config/examples/FYSETC/AIO_II/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/FYSETC/F6_13/Configuration_adv.h b/config/examples/FYSETC/F6_13/Configuration_adv.h index 2af6dd97a0..166b3dea40 100644 --- a/config/examples/FYSETC/F6_13/Configuration_adv.h +++ b/config/examples/FYSETC/F6_13/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/FYSETC/S6/Configuration_adv.h b/config/examples/FYSETC/S6/Configuration_adv.h index 17b696192f..32ba467692 100644 --- a/config/examples/FYSETC/S6/Configuration_adv.h +++ b/config/examples/FYSETC/S6/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Felix/DUAL/Configuration_adv.h b/config/examples/Felix/DUAL/Configuration_adv.h index 6a30b0f4dd..41cb7255ed 100644 --- a/config/examples/Felix/DUAL/Configuration_adv.h +++ b/config/examples/Felix/DUAL/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Felix/Single/Configuration_adv.h b/config/examples/Felix/Single/Configuration_adv.h index 6a30b0f4dd..41cb7255ed 100644 --- a/config/examples/Felix/Single/Configuration_adv.h +++ b/config/examples/Felix/Single/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/FlashForge/Creator 2X/Configuration_adv.h b/config/examples/FlashForge/Creator 2X/Configuration_adv.h index a2bd53feb0..8142182983 100644 --- a/config/examples/FlashForge/Creator 2X/Configuration_adv.h +++ b/config/examples/FlashForge/Creator 2X/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/FlashForge/CreatorPro/Configuration_adv.h b/config/examples/FlashForge/CreatorPro/Configuration_adv.h index 540cd915fe..fddfd9d148 100644 --- a/config/examples/FlashForge/CreatorPro/Configuration_adv.h +++ b/config/examples/FlashForge/CreatorPro/Configuration_adv.h @@ -3471,6 +3471,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/FlyingBear/P902/Configuration_adv.h b/config/examples/FlyingBear/P902/Configuration_adv.h index 5ec3168842..f3098859a9 100644 --- a/config/examples/FlyingBear/P902/Configuration_adv.h +++ b/config/examples/FlyingBear/P902/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/FlyingBear/P905H/Configuration_adv.h b/config/examples/FlyingBear/P905H/Configuration_adv.h index e2550d70d6..f26fa5ba0f 100644 --- a/config/examples/FlyingBear/P905H/Configuration_adv.h +++ b/config/examples/FlyingBear/P905H/Configuration_adv.h @@ -3475,6 +3475,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/config/examples/FolgerTech/i3-2020/Configuration_adv.h index e4da21d777..f55608c658 100644 --- a/config/examples/FolgerTech/i3-2020/Configuration_adv.h +++ b/config/examples/FolgerTech/i3-2020/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Formbot/Raptor/Configuration_adv.h b/config/examples/Formbot/Raptor/Configuration_adv.h index 95861e1be4..e4c4a2a77c 100644 --- a/config/examples/Formbot/Raptor/Configuration_adv.h +++ b/config/examples/Formbot/Raptor/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h index 2c91342467..61ba072918 100644 --- a/config/examples/Formbot/T_Rex_2+/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_2+/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/config/examples/Formbot/T_Rex_3/Configuration_adv.h index 1c17905e37..ce8217e1ef 100644 --- a/config/examples/Formbot/T_Rex_3/Configuration_adv.h +++ b/config/examples/Formbot/T_Rex_3/Configuration_adv.h @@ -3476,6 +3476,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A10/Configuration_adv.h b/config/examples/Geeetech/A10/Configuration_adv.h index 6ac43f75b9..7c3ad1d4e4 100644 --- a/config/examples/Geeetech/A10/Configuration_adv.h +++ b/config/examples/Geeetech/A10/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A10D/Configuration_adv.h b/config/examples/Geeetech/A10D/Configuration_adv.h index f0e6100785..d4ff0eeba1 100644 --- a/config/examples/Geeetech/A10D/Configuration_adv.h +++ b/config/examples/Geeetech/A10D/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h index c18c0238e3..23885cd85e 100644 --- a/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/Stock LCD/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h index c18c0238e3..23885cd85e 100644 --- a/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10M/YHCB2004_V4.1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A10PRO/Configuration_adv.h b/config/examples/Geeetech/A10PRO/Configuration_adv.h index 6ac43f75b9..7c3ad1d4e4 100644 --- a/config/examples/Geeetech/A10PRO/Configuration_adv.h +++ b/config/examples/Geeetech/A10PRO/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h index c18c0238e3..23885cd85e 100644 --- a/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/Stock LCD/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h index c18c0238e3..23885cd85e 100644 --- a/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h +++ b/config/examples/Geeetech/A10T/YHCB2004_V4.1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A20/Configuration_adv.h b/config/examples/Geeetech/A20/Configuration_adv.h index 9c60e5004e..1799d41742 100644 --- a/config/examples/Geeetech/A20/Configuration_adv.h +++ b/config/examples/Geeetech/A20/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A20M/Configuration_adv.h b/config/examples/Geeetech/A20M/Configuration_adv.h index 9c60e5004e..1799d41742 100644 --- a/config/examples/Geeetech/A20M/Configuration_adv.h +++ b/config/examples/Geeetech/A20M/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A20T/Configuration_adv.h b/config/examples/Geeetech/A20T/Configuration_adv.h index 9c60e5004e..1799d41742 100644 --- a/config/examples/Geeetech/A20T/Configuration_adv.h +++ b/config/examples/Geeetech/A20T/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A30/Configuration_adv.h b/config/examples/Geeetech/A30/Configuration_adv.h index 7b4efe23ed..ec2fa465bc 100644 --- a/config/examples/Geeetech/A30/Configuration_adv.h +++ b/config/examples/Geeetech/A30/Configuration_adv.h @@ -3471,6 +3471,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A30M/Configuration_adv.h b/config/examples/Geeetech/A30M/Configuration_adv.h index 7b4efe23ed..ec2fa465bc 100644 --- a/config/examples/Geeetech/A30M/Configuration_adv.h +++ b/config/examples/Geeetech/A30M/Configuration_adv.h @@ -3471,6 +3471,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/A30T/Configuration_adv.h b/config/examples/Geeetech/A30T/Configuration_adv.h index 7b4efe23ed..ec2fa465bc 100644 --- a/config/examples/Geeetech/A30T/Configuration_adv.h +++ b/config/examples/Geeetech/A30T/Configuration_adv.h @@ -3471,6 +3471,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/D200/Configuration_adv.h b/config/examples/Geeetech/D200/Configuration_adv.h index fc4e45f83f..d9067603fa 100644 --- a/config/examples/Geeetech/D200/Configuration_adv.h +++ b/config/examples/Geeetech/D200/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/Duplicator5/Configuration_adv.h b/config/examples/Geeetech/Duplicator5/Configuration_adv.h index 17b696192f..32ba467692 100644 --- a/config/examples/Geeetech/Duplicator5/Configuration_adv.h +++ b/config/examples/Geeetech/Duplicator5/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/E180/Configuration_adv.h b/config/examples/Geeetech/E180/Configuration_adv.h index 7b4efe23ed..ec2fa465bc 100644 --- a/config/examples/Geeetech/E180/Configuration_adv.h +++ b/config/examples/Geeetech/E180/Configuration_adv.h @@ -3471,6 +3471,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/M201/Configuration_adv.h b/config/examples/Geeetech/M201/Configuration_adv.h index fc4e45f83f..d9067603fa 100644 --- a/config/examples/Geeetech/M201/Configuration_adv.h +++ b/config/examples/Geeetech/M201/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/config/examples/Geeetech/MeCreator2/Configuration_adv.h index bd9ea81e82..0d08e359e6 100644 --- a/config/examples/Geeetech/MeCreator2/Configuration_adv.h +++ b/config/examples/Geeetech/MeCreator2/Configuration_adv.h @@ -3471,6 +3471,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/Me_creator/Configuration_adv.h b/config/examples/Geeetech/Me_creator/Configuration_adv.h index 17b696192f..32ba467692 100644 --- a/config/examples/Geeetech/Me_creator/Configuration_adv.h +++ b/config/examples/Geeetech/Me_creator/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/Me_ducer/Configuration_adv.h b/config/examples/Geeetech/Me_ducer/Configuration_adv.h index e4a44c57a4..96b61c626b 100644 --- a/config/examples/Geeetech/Me_ducer/Configuration_adv.h +++ b/config/examples/Geeetech/Me_ducer/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h index 35c884fc9d..8fbd2960d7 100644 --- a/config/examples/Geeetech/PI3A PRO/Configuration_adv.h +++ b/config/examples/Geeetech/PI3A PRO/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h index 6ac43f75b9..7c3ad1d4e4 100644 --- a/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h index 6ac43f75b9..7c3ad1d4e4 100644 --- a/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h +++ b/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/HMS434/Configuration_adv.h b/config/examples/HMS434/Configuration_adv.h index e6abfab795..3baee25e01 100644 --- a/config/examples/HMS434/Configuration_adv.h +++ b/config/examples/HMS434/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Infitary/i3-M508/Configuration_adv.h b/config/examples/Infitary/i3-M508/Configuration_adv.h index 7263ab17b1..d60c72d546 100644 --- a/config/examples/Infitary/i3-M508/Configuration_adv.h +++ b/config/examples/Infitary/i3-M508/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h index 9ab972a14a..41633c17b9 100644 --- a/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h +++ b/config/examples/Intamsys/FunmatHT 4988/Configuration_adv.h @@ -3471,6 +3471,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/JGAurora/A1/Configuration_adv.h b/config/examples/JGAurora/A1/Configuration_adv.h index 86d27b5fe8..2a479c4b96 100644 --- a/config/examples/JGAurora/A1/Configuration_adv.h +++ b/config/examples/JGAurora/A1/Configuration_adv.h @@ -3478,6 +3478,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/JGAurora/A5/Configuration_adv.h b/config/examples/JGAurora/A5/Configuration_adv.h index e915a5644c..b2d4d42fd2 100644 --- a/config/examples/JGAurora/A5/Configuration_adv.h +++ b/config/examples/JGAurora/A5/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/JGAurora/A5S/Configuration_adv.h b/config/examples/JGAurora/A5S/Configuration_adv.h index 17b331c17f..b2b366bad4 100644 --- a/config/examples/JGAurora/A5S/Configuration_adv.h +++ b/config/examples/JGAurora/A5S/Configuration_adv.h @@ -3478,6 +3478,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/JGAurora/Magic/Configuration_adv.h b/config/examples/JGAurora/Magic/Configuration_adv.h index 91b6503733..386422623d 100644 --- a/config/examples/JGAurora/Magic/Configuration_adv.h +++ b/config/examples/JGAurora/Magic/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Kingroon/KP3/Configuration_adv.h b/config/examples/Kingroon/KP3/Configuration_adv.h index b36f0bf385..910817af29 100644 --- a/config/examples/Kingroon/KP3/Configuration_adv.h +++ b/config/examples/Kingroon/KP3/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Labists/ET4/Configuration_adv.h b/config/examples/Labists/ET4/Configuration_adv.h index dae6021fe8..e57cef4199 100644 --- a/config/examples/Labists/ET4/Configuration_adv.h +++ b/config/examples/Labists/ET4/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/LulzBot/TAZ4/Configuration_adv.h b/config/examples/LulzBot/TAZ4/Configuration_adv.h index 5d50b33ce6..a370e06da5 100644 --- a/config/examples/LulzBot/TAZ4/Configuration_adv.h +++ b/config/examples/LulzBot/TAZ4/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/MBot/Cube/Configuration_adv.h b/config/examples/MBot/Cube/Configuration_adv.h index fa0ab84e5b..e36658844c 100644 --- a/config/examples/MBot/Cube/Configuration_adv.h +++ b/config/examples/MBot/Cube/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h index 6204fb5446..b6fe95f291 100644 --- a/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h +++ b/config/examples/MakerFarm/Pegasus 12/Configuration_adv.h @@ -3466,6 +3466,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/MakerParts/Configuration_adv.h b/config/examples/MakerParts/Configuration_adv.h index 55158d3364..9794a39335 100644 --- a/config/examples/MakerParts/Configuration_adv.h +++ b/config/examples/MakerParts/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Malyan/M150/Configuration_adv.h b/config/examples/Malyan/M150/Configuration_adv.h index 0363742732..d72ae04ca3 100644 --- a/config/examples/Malyan/M150/Configuration_adv.h +++ b/config/examples/Malyan/M150/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Malyan/M200/Configuration_adv.h b/config/examples/Malyan/M200/Configuration_adv.h index 03e31b6f9d..f892f123cd 100644 --- a/config/examples/Malyan/M200/Configuration_adv.h +++ b/config/examples/Malyan/M200/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/config/examples/Micromake/C1/enhanced/Configuration_adv.h index 70f233836c..05bada2994 100644 --- a/config/examples/Micromake/C1/enhanced/Configuration_adv.h +++ b/config/examples/Micromake/C1/enhanced/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Mks/Sbase/Configuration_adv.h b/config/examples/Mks/Sbase/Configuration_adv.h index 3946641d52..c1947d817b 100644 --- a/config/examples/Mks/Sbase/Configuration_adv.h +++ b/config/examples/Mks/Sbase/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Modix/Big60/Configuration_adv.h b/config/examples/Modix/Big60/Configuration_adv.h index 11e3872fb9..1ad961acb6 100644 --- a/config/examples/Modix/Big60/Configuration_adv.h +++ b/config/examples/Modix/Big60/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Nextion/Configuration_adv.h b/config/examples/Nextion/Configuration_adv.h index ead4894d52..8a5b17fc3b 100644 --- a/config/examples/Nextion/Configuration_adv.h +++ b/config/examples/Nextion/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h index 889ef0ee24..62e10f7731 100644 --- a/config/examples/Opulo/Lumen_REV3/Configuration_adv.h +++ b/config/examples/Opulo/Lumen_REV3/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Ortur 4/Configuration_adv.h b/config/examples/Ortur 4/Configuration_adv.h index 58fa019016..7c840bc958 100644 --- a/config/examples/Ortur 4/Configuration_adv.h +++ b/config/examples/Ortur 4/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Polargraph/Configuration_adv.h b/config/examples/Polargraph/Configuration_adv.h index c007b702b8..1922f8bcd2 100644 --- a/config/examples/Polargraph/Configuration_adv.h +++ b/config/examples/Polargraph/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Prusa/MK3/Configuration_adv.h b/config/examples/Prusa/MK3/Configuration_adv.h index 7595a3ac20..a5bff4cbdd 100644 --- a/config/examples/Prusa/MK3/Configuration_adv.h +++ b/config/examples/Prusa/MK3/Configuration_adv.h @@ -3478,6 +3478,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h index 6fd9f386a8..53ef872a53 100644 --- a/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h +++ b/config/examples/Prusa/MK3S-BigTreeTech-BTT002/Configuration_adv.h @@ -3475,6 +3475,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Qidi/Qidi 1/Configuration_adv.h b/config/examples/Qidi/Qidi 1/Configuration_adv.h index 77345c8294..db16227786 100644 --- a/config/examples/Qidi/Qidi 1/Configuration_adv.h +++ b/config/examples/Qidi/Qidi 1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Raiscube/A8r/Configuration_adv.h b/config/examples/Raiscube/A8r/Configuration_adv.h index 3e2f73e51d..9f27ed3587 100644 --- a/config/examples/Raiscube/A8r/Configuration_adv.h +++ b/config/examples/Raiscube/A8r/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/RapideLite/RL200/Configuration_adv.h b/config/examples/RapideLite/RL200/Configuration_adv.h index 17b696192f..32ba467692 100644 --- a/config/examples/RapideLite/RL200/Configuration_adv.h +++ b/config/examples/RapideLite/RL200/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Renkforce/RF100/Configuration_adv.h b/config/examples/Renkforce/RF100/Configuration_adv.h index 513a477356..539e8e7f7b 100644 --- a/config/examples/Renkforce/RF100/Configuration_adv.h +++ b/config/examples/Renkforce/RF100/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Renkforce/RF100XL/Configuration_adv.h b/config/examples/Renkforce/RF100XL/Configuration_adv.h index 513a477356..539e8e7f7b 100644 --- a/config/examples/Renkforce/RF100XL/Configuration_adv.h +++ b/config/examples/Renkforce/RF100XL/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Renkforce/RF100v2/Configuration_adv.h b/config/examples/Renkforce/RF100v2/Configuration_adv.h index 513a477356..539e8e7f7b 100644 --- a/config/examples/Renkforce/RF100v2/Configuration_adv.h +++ b/config/examples/Renkforce/RF100v2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/RigidBot/Configuration_adv.h b/config/examples/RigidBot/Configuration_adv.h index d0cbdd0f5c..8813fee153 100644 --- a/config/examples/RigidBot/Configuration_adv.h +++ b/config/examples/RigidBot/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/SCARA/MP_SCARA/Configuration_adv.h b/config/examples/SCARA/MP_SCARA/Configuration_adv.h index 1b19f0c626..0a4c21cb32 100644 --- a/config/examples/SCARA/MP_SCARA/Configuration_adv.h +++ b/config/examples/SCARA/MP_SCARA/Configuration_adv.h @@ -3469,6 +3469,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/SCARA/Morgan/Configuration_adv.h b/config/examples/SCARA/Morgan/Configuration_adv.h index a975841acb..5ae0a94593 100644 --- a/config/examples/SCARA/Morgan/Configuration_adv.h +++ b/config/examples/SCARA/Morgan/Configuration_adv.h @@ -3469,6 +3469,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h index daf8bab2c0..ad6326c51a 100644 --- a/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h +++ b/config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Sanguinololu/Configuration_adv.h b/config/examples/Sanguinololu/Configuration_adv.h index b8fd85c429..b653f43e19 100644 --- a/config/examples/Sanguinololu/Configuration_adv.h +++ b/config/examples/Sanguinololu/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Simulator/Configuration_adv.h b/config/examples/Simulator/Configuration_adv.h index 753f3dea0b..7fb0292494 100644 --- a/config/examples/Simulator/Configuration_adv.h +++ b/config/examples/Simulator/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h index 186883dfe3..188c392bb3 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR E3 Turbo/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h index b402e2c563..8483ca0320 100644 --- a/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h index 585d254255..c9ad589c22 100644 --- a/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV22/Configuration_adv.h @@ -3470,6 +3470,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h index fc125c4cec..80a3ec2190 100644 --- a/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h +++ b/config/examples/Sovol/SV-01/CrealityV221/Configuration_adv.h @@ -3470,6 +3470,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Sunlu/S8/Configuration_adv.h b/config/examples/Sunlu/S8/Configuration_adv.h index 6791a6da23..13c8f18121 100644 --- a/config/examples/Sunlu/S8/Configuration_adv.h +++ b/config/examples/Sunlu/S8/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h index 6e98d6fd6f..03555d68ed 100644 --- a/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h +++ b/config/examples/TPARA/AXEL_TPARA/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Tevo/Michelangelo/Configuration_adv.h b/config/examples/Tevo/Michelangelo/Configuration_adv.h index 0652d293de..7f3df3c3ed 100644 --- a/config/examples/Tevo/Michelangelo/Configuration_adv.h +++ b/config/examples/Tevo/Michelangelo/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Tevo/Nereus/Configuration_adv.h b/config/examples/Tevo/Nereus/Configuration_adv.h index fa0239ba84..89bcb5033c 100644 --- a/config/examples/Tevo/Nereus/Configuration_adv.h +++ b/config/examples/Tevo/Nereus/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h index 8c271b7519..f4a37e37e9 100644 --- a/config/examples/Tevo/Tarantula Pro/Configuration_adv.h +++ b/config/examples/Tevo/Tarantula Pro/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h index 4c09d8ea5f..9d45577bc1 100644 --- a/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h index 4c09d8ea5f..9d45577bc1 100644 --- a/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h +++ b/config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/TheBorg/Configuration_adv.h b/config/examples/TheBorg/Configuration_adv.h index 639addfa31..432e9b36d7 100644 --- a/config/examples/TheBorg/Configuration_adv.h +++ b/config/examples/TheBorg/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/TinyBoy2/Configuration_adv.h b/config/examples/TinyBoy2/Configuration_adv.h index e34951c1a0..1c8e9e4abe 100644 --- a/config/examples/TinyBoy2/Configuration_adv.h +++ b/config/examples/TinyBoy2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Tronxy/X3A/Configuration_adv.h b/config/examples/Tronxy/X3A/Configuration_adv.h index 1a941444e2..6490cedc5c 100644 --- a/config/examples/Tronxy/X3A/Configuration_adv.h +++ b/config/examples/Tronxy/X3A/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Tronxy/X5S-2E/Configuration_adv.h b/config/examples/Tronxy/X5S-2E/Configuration_adv.h index a8d009f571..c7d4cf02fa 100644 --- a/config/examples/Tronxy/X5S-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5S-2E/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h index 429da3cf3d..53812a8d7a 100644 --- a/config/examples/Tronxy/X5SA-2E/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA-2E/Configuration_adv.h @@ -3476,6 +3476,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Tronxy/X5SA/Configuration_adv.h b/config/examples/Tronxy/X5SA/Configuration_adv.h index 6d0583ad50..6144ea145b 100644 --- a/config/examples/Tronxy/X5SA/Configuration_adv.h +++ b/config/examples/Tronxy/X5SA/Configuration_adv.h @@ -3476,6 +3476,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h index 97c523b374..311ad5c006 100644 --- a/config/examples/Two Trees/BlueR Plus/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR Plus/Configuration_adv.h @@ -3473,6 +3473,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h index 35e63386d8..4e65529a76 100644 --- a/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V1/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h index 35e63386d8..4e65529a76 100644 --- a/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V2/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h index 35e63386d8..4e65529a76 100644 --- a/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h +++ b/config/examples/Two Trees/BlueR/BlueR V3/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h index 129e8d8b7d..dad9948d09 100644 --- a/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Plus/Sapphire Plus V2/Configuration_adv.h @@ -3479,6 +3479,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h index 02371ccef5..73c4612779 100644 --- a/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h +++ b/config/examples/Two Trees/Sapphire Pro/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/UltiMachine/Archim1/Configuration_adv.h b/config/examples/UltiMachine/Archim1/Configuration_adv.h index 5d5b23c67d..b5cf4ed8b7 100644 --- a/config/examples/UltiMachine/Archim1/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/UltiMachine/Archim2/Configuration_adv.h b/config/examples/UltiMachine/Archim2/Configuration_adv.h index 4005fb4466..85b5b98326 100644 --- a/config/examples/UltiMachine/Archim2/Configuration_adv.h +++ b/config/examples/UltiMachine/Archim2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h index 9ad64ea3df..8a6664c511 100644 --- a/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker 2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h index b03407f217..6b2ff2fc32 100644 --- a/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original (1.5.7)/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h index 7af634dbfc..b687e11aa4 100644 --- a/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h +++ b/config/examples/Ultimaker/Ultimaker Original Plus (2.1.1)/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/VORONDesign/Configuration_adv.h b/config/examples/VORONDesign/Configuration_adv.h index 2c8cd3f997..83abd8e255 100644 --- a/config/examples/VORONDesign/Configuration_adv.h +++ b/config/examples/VORONDesign/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h index 82e9c36985..9f350e038b 100644 --- a/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h +++ b/config/examples/Velleman/K8200 Upgraded/Configuration_adv.h @@ -3485,6 +3485,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Velleman/K8200/Configuration_adv.h b/config/examples/Velleman/K8200/Configuration_adv.h index d99d43603f..8cf657c778 100644 --- a/config/examples/Velleman/K8200/Configuration_adv.h +++ b/config/examples/Velleman/K8200/Configuration_adv.h @@ -3485,6 +3485,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h index 3cece8783c..f9d804d765 100644 --- a/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Dual-head/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h index 3cece8783c..f9d804d765 100644 --- a/config/examples/Velleman/K8400/Single-head/Configuration_adv.h +++ b/config/examples/Velleman/K8400/Single-head/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/WASP/PowerWASP/Configuration_adv.h b/config/examples/WASP/PowerWASP/Configuration_adv.h index 3b5126cd05..f928ad9e59 100644 --- a/config/examples/WASP/PowerWASP/Configuration_adv.h +++ b/config/examples/WASP/PowerWASP/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h index 094192e06d..aad782a4f2 100644 --- a/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 4S/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h index 394c0b1f68..639b507c50 100644 --- a/config/examples/Wanhao/Duplicator 6/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator 6/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h index 79a2cc7f25..f550b0758a 100644 --- a/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 2.1/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h index 66ac1da91d..0aa8917010 100644 --- a/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h +++ b/config/examples/Wanhao/Duplicator i3 Mini/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Weedo/Tina2/V2/Configuration_adv.h b/config/examples/Weedo/Tina2/V2/Configuration_adv.h index 724caec64d..897683d262 100644 --- a/config/examples/Weedo/Tina2/V2/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Weedo/Tina2/V3/Configuration_adv.h b/config/examples/Weedo/Tina2/V3/Configuration_adv.h index 724caec64d..897683d262 100644 --- a/config/examples/Weedo/Tina2/V3/Configuration_adv.h +++ b/config/examples/Weedo/Tina2/V3/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Weistek/wt150/Configuration_adv.h b/config/examples/Weistek/wt150/Configuration_adv.h index 6901fd9d41..97bde8e627 100644 --- a/config/examples/Weistek/wt150/Configuration_adv.h +++ b/config/examples/Weistek/wt150/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Zonestar/P802M/Configuration_adv.h b/config/examples/Zonestar/P802M/Configuration_adv.h index 5e893b334f..c379323ec4 100644 --- a/config/examples/Zonestar/P802M/Configuration_adv.h +++ b/config/examples/Zonestar/P802M/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h index 27dac321dc..dfeac8251e 100644 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (A4988)/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h index b015f3097c..298d435329 100755 --- a/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h +++ b/config/examples/Zonestar/P802QR2/BigTreeTech SKR 1.4 Turbo (TMC2209)/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h index 86f0a0546a..ca59ccb3e8 100644 --- a/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel Linear Plus/Configuration_adv.h @@ -3475,6 +3475,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h index df56db36c6..46ffc80bf1 100644 --- a/config/examples/delta/Anycubic/Kossel/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Kossel/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Anycubic/Predator/Configuration_adv.h b/config/examples/delta/Anycubic/Predator/Configuration_adv.h index 949ef4c308..aa384333c0 100644 --- a/config/examples/delta/Anycubic/Predator/Configuration_adv.h +++ b/config/examples/delta/Anycubic/Predator/Configuration_adv.h @@ -3475,6 +3475,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h index 2fd7114d76..1eeb4affa6 100644 --- a/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h index 2fd7114d76..1eeb4affa6 100644 --- a/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h +++ b/config/examples/delta/Dreammaker/Overlord_Pro/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h index e697bf508c..eebdb8ed47 100644 --- a/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h +++ b/config/examples/delta/FLSUN/Q5-nano_v1/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h index bbc2cf7e26..3e0fdf5bcf 100644 --- a/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQ-S/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h index 7e1c06712e..fd83be719e 100644 --- a/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h +++ b/config/examples/delta/FLSUN/QQS-Pro/Configuration_adv.h @@ -3475,6 +3475,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h index 1ea59ce1c1..b387c1c08c 100644 --- a/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/config/examples/delta/FLSUN/kossel/Configuration_adv.h index 1ea59ce1c1..b387c1c08c 100644 --- a/config/examples/delta/FLSUN/kossel/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h index dca7e26a7b..46556ac2a1 100644 --- a/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Geeetech/G2/Configuration_adv.h b/config/examples/delta/Geeetech/G2/Configuration_adv.h index 2250fb623c..96abbb5e95 100644 --- a/config/examples/delta/Geeetech/G2/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h index 2250fb623c..96abbb5e95 100644 --- a/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2Pro/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Geeetech/G2S/Configuration_adv.h b/config/examples/delta/Geeetech/G2S/Configuration_adv.h index 2250fb623c..96abbb5e95 100644 --- a/config/examples/delta/Geeetech/G2S/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2S/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h index 2250fb623c..96abbb5e95 100644 --- a/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h +++ b/config/examples/delta/Geeetech/G2SPro/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h index 69bad64101..a807fc9aa0 100644 --- a/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h +++ b/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h index 3af73fd2e3..910115da82 100644 --- a/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h +++ b/config/examples/delta/Hatchbox_Alpha/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/MKS/SBASE/Configuration_adv.h b/config/examples/delta/MKS/SBASE/Configuration_adv.h index 520551474f..d5046f2f4f 100644 --- a/config/examples/delta/MKS/SBASE/Configuration_adv.h +++ b/config/examples/delta/MKS/SBASE/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Malyan M300/Configuration_adv.h b/config/examples/delta/Malyan M300/Configuration_adv.h index 069489af61..d85c3d6dfb 100644 --- a/config/examples/delta/Malyan M300/Configuration_adv.h +++ b/config/examples/delta/Malyan M300/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/config/examples/delta/Tevo Little Monster/Configuration_adv.h index 7800436f3d..0e92a0f4f6 100644 --- a/config/examples/delta/Tevo Little Monster/Configuration_adv.h +++ b/config/examples/delta/Tevo Little Monster/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/generic/Configuration_adv.h b/config/examples/delta/generic/Configuration_adv.h index dca7e26a7b..46556ac2a1 100644 --- a/config/examples/delta/generic/Configuration_adv.h +++ b/config/examples/delta/generic/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/kossel_clear/Configuration_adv.h b/config/examples/delta/kossel_clear/Configuration_adv.h index 3a34da8267..3e5b3a8f87 100644 --- a/config/examples/delta/kossel_clear/Configuration_adv.h +++ b/config/examples/delta/kossel_clear/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/delta/kossel_xl/Configuration_adv.h b/config/examples/delta/kossel_xl/Configuration_adv.h index 915c414d31..346f4759b6 100644 --- a/config/examples/delta/kossel_xl/Configuration_adv.h +++ b/config/examples/delta/kossel_xl/Configuration_adv.h @@ -3474,6 +3474,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/config/examples/gCreate/gMax1.5+/Configuration_adv.h index b160c66ffe..3235635ef5 100644 --- a/config/examples/gCreate/gMax1.5+/Configuration_adv.h +++ b/config/examples/gCreate/gMax1.5+/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h index ed7179448b..70ed418849 100644 --- a/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h +++ b/config/examples/linear_axes/RAMPS 5 LINEAR_AXES/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/makibox/Configuration_adv.h b/config/examples/makibox/Configuration_adv.h index cde8c6d3cf..d626b7e30e 100644 --- a/config/examples/makibox/Configuration_adv.h +++ b/config/examples/makibox/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 diff --git a/config/examples/tvrrug/Round2/Configuration_adv.h b/config/examples/tvrrug/Round2/Configuration_adv.h index 8fc6484770..7635a6e0e2 100644 --- a/config/examples/tvrrug/Round2/Configuration_adv.h +++ b/config/examples/tvrrug/Round2/Configuration_adv.h @@ -3472,6 +3472,9 @@ #if ENABLED(SPINDLE_LASER_USE_PWM) #define SPINDLE_LASER_PWM_INVERT false // Set to "true" if the speed/power goes up when you want it to go slower #define SPINDLE_LASER_FREQUENCY 2500 // (Hz) Spindle/laser frequency (only on supported HALs: AVR, ESP32, and LPC) + // ESP32: If SPINDLE_LASER_PWM_PIN is onboard then <=78125Hz. For I2S expander + // the frequency determines the PWM resolution. 2500Hz = 0-100, 977Hz = 0-255, ... + // (250000 / SPINDLE_LASER_FREQUENCY) = max value. #endif //#define AIR_EVACUATION // Cutter Vacuum / Laser Blower motor control with G-codes M10-M11 |