set material specific settingsPP-170-clean-up-retraction_count_max

TPU, PP and PVA have a lower retraction count then default. PP-170

80 files changed, 80 insertions, 84 deletions

diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
index 56320f0b73..79e51d0130 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_fast.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
index 5e84e3f167..27c9470728 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.4_normal.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
index 10cbfab427..2088192367 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_draft.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
index 161ca2e079..261c2552a8 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.6_fast.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
index e88b527308..b70e495ff0 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_draft.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
index 36d599faf3..f00847c032 100644
--- a/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_pp_0.8_verydraft.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
index 87784fa7cf..11b1e2e84c 100644
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.25_high.inst.cfg
@@ -25,6 +25,7 @@ raft_base_line_spacing = 1
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.2
 raft_surface_line_width = 0.2
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
index c49f135c87..b45b7de66e 100644
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.4_normal.inst.cfg
@@ -23,6 +23,7 @@ raft_base_line_spacing = 2
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_margin = 12
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
index 3231fc1cef..568e8ed542 100644
--- a/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus/um2p_tpu_0.6_fast.inst.cfg
@@ -26,6 +26,7 @@ raft_interface_line_spacing = 1.2
 raft_interface_line_width = 0.57
 raft_margin = 15
 raft_surface_line_width = 0.5
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
index 70aecc029f..dc3f2eb7dc 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_fast.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
index 8b28161b09..9471b11d32 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.4_normal.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
index b1d7adfd0b..8470257f3b 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_draft.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
index a64996c8f0..9c4e23f545 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.6_fast.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
index f3dd14c276..b2c62ba2b4 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_draft.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
index 232d74d602..bca822ad58 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_pp_0.8_verydraft.inst.cfg
@@ -39,8 +39,7 @@ jerk_topbottom = =math.ceil(jerk_print * 5 / 25)
 jerk_wall = =math.ceil(jerk_print * 10 / 25)
 jerk_wall_0 = =math.ceil(jerk_wall * 5 / 10)
 multiple_mesh_overlap = 0
-retraction_count_max = 12
-retraction_extrusion_window = 1
+retraction_count_max = 15
 retraction_hop = 0.15
 retraction_hop_enabled = True
 retraction_hop_only_when_collides = True
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
index 4371dcf524..169b990d3d 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.25_high.inst.cfg
@@ -25,6 +25,7 @@ raft_base_line_spacing = 1
 raft_interface_line_spacing = 1
 raft_interface_line_width = 0.2
 raft_surface_line_width = 0.2
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
index ecd8c76a50..b822d913b3 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.4_normal.inst.cfg
@@ -23,6 +23,7 @@ raft_base_line_spacing = 2
 raft_base_line_width = 0.8
 raft_interface_line_spacing = 1
 raft_margin = 12
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 40)
 speed_print = 40
diff --git a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
index 14844dc216..941f119653 100644
--- a/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
+++ b/resources/quality/ultimaker2_plus_connect/um2pc_tpu_0.6_fast.inst.cfg
@@ -26,6 +26,7 @@ raft_interface_line_spacing = 1.2
 raft_interface_line_width = 0.57
 raft_margin = 15
 raft_surface_line_width = 0.5
+retraction_count_max = 15
 retraction_hop_enabled = 0.2
 speed_layer_0 = =math.ceil(speed_print * 30 / 45)
 speed_print = 45
diff --git a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
index 77af8bae1e..f26fcd025f 100644
--- a/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -31,9 +31,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 45
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
-retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
index 5a49c5d95f..c151870622 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Draft_Print.inst.cfg
@@ -38,9 +38,8 @@ prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
 retraction_amount = 6.5
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
index 1da161a2fb..7e21bec438 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Fast_Print.inst.cfg
@@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
index 52aadd5b2d..e37f16bc72 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -36,9 +36,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
index b5cc9b7261..0cf30a04ca 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
index 4e7696c0b3..66e1160692 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -37,9 +37,8 @@ material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
 retraction_amount = 7
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
diff --git a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
index caed386864..c0889bdbeb 100644
--- a/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -34,9 +34,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 1.5
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
index 8fdcd54797..6510c0db81 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Draft_Print.inst.cfg
@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 10
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
index ff729395b9..d37c9aef29 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 20
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
index 911932c819..2313d3e7f2 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 15
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
index 53bf19e17b..e68fde0763 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -30,7 +30,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
index a1cfef6d5f..c0c9e7c48a 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -31,7 +31,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
index 388959da4a..e85db940a5 100644
--- a/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -30,7 +30,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
index ae1cd2f262..a9adf2e3de 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Draft_Print.inst.cfg
@@ -16,5 +16,6 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 20
 support_brim_enable = True
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
index 9652a2f50a..90be6c2b37 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Fast_Print.inst.cfg
@@ -16,6 +16,7 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 15
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
index 72cc7dc901..98d9566577 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_High_Quality.inst.cfg
@@ -15,5 +15,6 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.18
diff --git a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
index e828b94f2e..cc8c3bf10a 100644
--- a/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -15,4 +15,5 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
index e7c07c73fa..6a54c04e7b 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Draft_Print.inst.cfg
@@ -15,4 +15,5 @@ variant = BB 0.8
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
index bcb92ccefa..7947e3cfe8 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -15,5 +15,6 @@ variant = BB 0.8
 brim_replaces_support = False
 layer_height = 0.4
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_interface_height = 0.9
diff --git a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
index 3ce14a2ad0..3e2c92bbf6 100644
--- a/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker3/um3_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -15,6 +15,7 @@ variant = BB 0.8
 brim_replaces_support = False
 layer_height = 0.3
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
index d0668b64f6..4fd18781f5 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.25_PP_Normal_Quality.inst.cfg
@@ -31,9 +31,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 6
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
-retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
index 75eba5b995..267c57c21a 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Draft_Print.inst.cfg
@@ -36,9 +36,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
index fdf769ed38..1cc6ff8595 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Fast_Print.inst.cfg
@@ -35,9 +35,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
index 821e1f4840..49754af9e7 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_PP_Normal_Quality.inst.cfg
@@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
index 566f474dc4..09bb37312d 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Draft_Print.inst.cfg
@@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
index e968507192..baf8608604 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Fast_Print.inst.cfg
@@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
index ca8410766a..c0445e739c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -35,9 +35,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
index 4572e3fabc..14a7451bcc 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Draft_Print.inst.cfg
@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 10
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
index 596f34d7b9..c466b76c1c 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 20
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
index 4f1a91337a..804149a584 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -25,7 +25,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 15
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
index dc4858e463..ab71a4c37e 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Draft_Print.inst.cfg
@@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
index d2e23c81a9..ac2181d373 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -29,7 +29,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
index 3d4076c08c..e4bb128599 100644
--- a/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
index afb19f1769..94802d49fc 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Draft_Print.inst.cfg
@@ -16,5 +16,6 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 20
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
index 6b1cef8991..bafe3e88d6 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Fast_Print.inst.cfg
@@ -16,6 +16,7 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 15
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
index 0a9a37ca05..c1b9556636 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_High_Quality.inst.cfg
@@ -15,5 +15,6 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.18
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
index a899959d98..0a4e11c158 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -15,4 +15,5 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
index 0cd6094bbc..8bd0e5d375 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.4_PVA_Verydraft_Print.inst.cfg
@@ -15,6 +15,7 @@ is_experimental = True
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
index 388ebeff72..587b7b29cd 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Draft_Print.inst.cfg
@@ -15,4 +15,5 @@ variant = BB 0.8
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
index e9030819ea..c1cbac87a0 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -14,5 +14,6 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_interface_height = 0.9
diff --git a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
index c35737bb97..b5e22bef62 100644
--- a/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s3/um_s3_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -14,6 +14,7 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
index 85a608c293..f85282b4db 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.25_PP_Normal_Quality.inst.cfg
@@ -31,9 +31,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 6
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.2
-retraction_extrusion_window = 6.5
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
index 5da2b96e2d..1e24727623 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Draft_Print.inst.cfg
@@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
index cc5a911809..c1922ac8c0 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Fast_Print.inst.cfg
@@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
index 82646132a0..56356b097c 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_PP_Normal_Quality.inst.cfg
@@ -37,9 +37,8 @@ multiple_mesh_overlap = 0
 prime_tower_enable = False
 prime_tower_size = 16
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop = 2
 retraction_hop_only_when_collides = True
 retraction_min_travel = 0.8
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
index 8778abc64e..e9fa0ad764 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Draft_Print.inst.cfg
@@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
index 1725470319..afc5e71fab 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Fast_Print.inst.cfg
@@ -36,9 +36,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 15
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
index 782b9d896a..57a0e450ea 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.4_TPU_Normal_Quality.inst.cfg
@@ -35,9 +35,8 @@ material_print_temperature_layer_0 = =material_print_temperature + 17
 material_standby_temperature = 100
 multiple_mesh_overlap = 0
 prime_tower_wipe_enabled = True
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.8
-retraction_extrusion_window = 1
 retraction_hop_only_when_collides = True
 retraction_min_travel = =line_width * 2
 skin_line_width = =round(line_width / 0.8, 2)
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
index 1d2d0c68fd..aa86db8c84 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Draft_Print.inst.cfg
@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 10
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
index 7026544931..4bf0036315 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Superdraft_Print.inst.cfg
@@ -26,7 +26,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 20
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
index 98c8df6a6a..69a33b38f8 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_PP_Verydraft_Print.inst.cfg
@@ -25,7 +25,7 @@ prime_tower_enable = True
 prime_tower_flow = 100
 prime_tower_min_volume = 15
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 0.5
 retraction_min_travel = 1.5
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
index f6d8169fe8..9301d7d69f 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Draft_Print.inst.cfg
@@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
index 561acf9fbc..f410bd8c85 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Superdraft_Print.inst.cfg
@@ -29,7 +29,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
index fa432061bb..3df2f2ca0e 100644
--- a/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_aa0.8_TPU_Verydraft_Print.inst.cfg
@@ -28,7 +28,7 @@ multiple_mesh_overlap = 0.2
 prime_tower_enable = True
 prime_tower_flow = 100
 retract_at_layer_change = False
-retraction_count_max = 12
+retraction_count_max = 15
 retraction_extra_prime_amount = 0.5
 retraction_hop = 1.5
 retraction_hop_only_when_collides = False
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
index ef24c27b5a..b4ebe1f4e9 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Draft_Print.inst.cfg
@@ -16,5 +16,6 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 10
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 20
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
index d630c3bd3a..5f14866677 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Fast_Print.inst.cfg
@@ -16,6 +16,7 @@ brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 skin_overlap = 15
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
index 8d5448aafb..9e35615f14 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_High_Quality.inst.cfg
@@ -15,5 +15,6 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.18
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
index cf4c07a411..b1774d2c27 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Normal_Quality.inst.cfg
@@ -15,4 +15,5 @@ variant = BB 0.4
 brim_replaces_support = False
 material_standby_temperature = 100
 prime_tower_enable = False
+retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
index e7a9936864..bd85b127a7 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.4_PVA_Verydraft_Print.inst.cfg
@@ -15,6 +15,7 @@ is_experimental = True
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
index 979295a38d..037e813e7f 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Draft_Print.inst.cfg
@@ -15,4 +15,5 @@ variant = BB 0.8
 brim_replaces_support = False
 material_print_temperature = =default_material_print_temperature + 5
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
index ffdc9c9d26..9a8a17da20 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Superdraft_Print.inst.cfg
@@ -14,5 +14,6 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_interface_height = 0.9
diff --git a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
index 871af303ed..4229ad1758 100644
--- a/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
+++ b/resources/quality/ultimaker_s5/um_s5_bb0.8_PVA_Verydraft_Print.inst.cfg
@@ -14,6 +14,7 @@ variant = BB 0.8
 [values]
 brim_replaces_support = False
 material_standby_temperature = 100
+retraction_count_max = 5
 support_brim_enable = True
 support_infill_sparse_thickness = 0.3
 support_interface_height = 1.2