Update translation templates for Cura 3.5

These are the new strings for Cura 3.5.

Contributes to issue CURA-5741.

1 files changed, 194 insertions, 102 deletions

diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot
index c505755444..79bcf5c7dc 100644
--- a/resources/i18n/fdmprinter.def.json.pot
+++ b/resources/i18n/fdmprinter.def.json.pot
@@ -1,17 +1,12 @@
-# Cura JSON setting files
-# Copyright (C) 2018 Ultimaker
-# This file is distributed under the same license as the Cura package.
-# Ruben Dulek <r.dulek@ultimaker.com>, 2018.
-#
+#, fuzzy
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 3.4\n"
-"Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2018-03-29 08:36+0200\n"
+"Project-Id-Version: Uranium json setting files\n"
+"Report-Msgid-Bugs-To: http://github.com/ultimaker/uranium\n"
+"POT-Creation-Date: 2018-09-19 17:07+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: TEAM\n"
-"Language: xx_XX\n"
+"Language-Team: LANGUAGE\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -83,6 +78,18 @@ msgid "GUID of the material. This is set automatically. "
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_diameter label"
+msgid "Diameter"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_diameter description"
+msgid ""
+"Adjusts the diameter of the filament used. Match this value with the "
+"diameter of the used filament."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_bed_temp_wait label"
 msgid "Wait for Build Plate Heatup"
 msgstr ""
@@ -1155,6 +1162,20 @@ msgid "Zig Zag"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid ""
+"Connect top/bottom skin paths where they run next to each other. For the "
+"concentric pattern enabling this setting greatly reduces the travel time, "
+"but because the connections can happend midway over infill this feature can "
+"reduce the top surface quality."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "skin_angles label"
 msgid "Top/Bottom Line Directions"
 msgstr ""
@@ -1262,6 +1283,33 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "wall_min_flow label"
+msgid "Minimum Wall Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_min_flow description"
+msgid ""
+"Minimum allowed percentage flow for a wall line. The wall overlap "
+"compensation reduces a wall's flow when it lies close to an existing wall. "
+"Walls whose flow is less than this value will be replaced with a travel "
+"move. When using this setting, you must enable the wall overlap compensation "
+"and print the outer wall before inner walls."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_min_flow_retract label"
+msgid "Prefer Retract"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_min_flow_retract description"
+msgid ""
+"If enabled, retraction is used rather than combing for travel moves that "
+"replace walls whose flow is below the minimum flow threshold."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "fill_perimeter_gaps label"
 msgid "Fill Gaps Between Walls"
 msgstr ""
@@ -1678,11 +1726,6 @@ msgid "Concentric"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "infill_pattern option concentric_3d"
-msgid "Concentric 3D"
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "infill_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
@@ -1713,6 +1756,19 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "connect_infill_polygons label"
+msgid "Connect Infill Polygons"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "connect_infill_polygons description"
+msgid ""
+"Connect infill paths where they run next to each other. For infill patterns "
+"which consist of several closed polygons, enabling this setting greatly "
+"reduces the travel time."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "infill_angles label"
 msgid "Infill Line Directions"
 msgstr ""
@@ -1749,6 +1805,35 @@ msgid "The infill pattern is moved this distance along the Y axis."
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "infill_multiplier label"
+msgid "Infill Line Multiplier"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_multiplier description"
+msgid ""
+"Convert each infill line to this many lines. The extra lines do not cross "
+"over each other, but avoid each other. This makes the infill stiffer, but "
+"increases print time and material usage."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_wall_line_count label"
+msgid "Extra Infill Wall Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_wall_line_count description"
+msgid ""
+"Add extra walls around the infill area. Such walls can make top/bottom skin "
+"lines sag down less which means you need less top/bottom skin layers for the "
+"same quality at the cost of some extra material.\n"
+"This feature can combine with the Connect Infill Polygons to connect all the "
+"infill into a single extrusion path without the need for travels or "
+"retractions if configured right."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "sub_div_rad_add label"
 msgid "Cubic Subdivision Shell"
 msgstr ""
@@ -2140,18 +2225,6 @@ msgid "The temperature used for the heated build plate at the first layer."
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "material_diameter label"
-msgid "Diameter"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "material_diameter description"
-msgid ""
-"Adjusts the diameter of the filament used. Match this value with the "
-"diameter of the used filament."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "material_adhesion_tendency label"
 msgid "Adhesion Tendency"
 msgstr ""
@@ -3106,7 +3179,9 @@ msgid ""
 "results in slightly longer travel moves but reduces the need for "
 "retractions. If combing is off, the material will retract and the nozzle "
 "moves in a straight line to the next point. It is also possible to avoid "
-"combing over top/bottom skin areas by combing within the infill only."
+"combing over top/bottom skin areas and also to only comb within the infill. "
+"Note that the 'Within Infill' option behaves exactly like the 'Not in Skin' "
+"option in earlier Cura releases."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -3125,6 +3200,11 @@ msgid "Not in Skin"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "retraction_combing option infill"
+msgid "Within Infill"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "retraction_combing_max_distance label"
 msgid "Max Comb Distance With No Retract"
 msgstr ""
@@ -3582,11 +3662,6 @@ msgid "Concentric"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "support_pattern option concentric_3d"
-msgid "Concentric 3D"
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "support_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
@@ -3659,6 +3734,30 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "support_initial_layer_line_distance label"
+msgid "Initial Layer Support Line Distance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_initial_layer_line_distance description"
+msgid ""
+"Distance between the printed initial layer support structure lines. This "
+"setting is calculated by the support density."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_infill_angle label"
+msgid "Support Infill Line Direction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_infill_angle description"
+msgid ""
+"Orientation of the infill pattern for supports. The support infill pattern "
+"is rotated in the horizontal plane."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "support_z_distance label"
 msgid "Support Z Distance"
 msgstr ""
@@ -4006,11 +4105,6 @@ msgid "Concentric"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "support_interface_pattern option concentric_3d"
-msgid "Concentric 3D"
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "support_interface_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
@@ -4046,11 +4140,6 @@ msgid "Concentric"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "support_roof_pattern option concentric_3d"
-msgid "Concentric 3D"
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "support_roof_pattern option zigzag"
 msgid "Zig Zag"
 msgstr ""
@@ -4086,13 +4175,32 @@ msgid "Concentric"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "support_bottom_pattern option concentric_3d"
-msgid "Concentric 3D"
+msgctxt "support_bottom_pattern option zigzag"
+msgid "Zig Zag"
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "support_bottom_pattern option zigzag"
-msgid "Zig Zag"
+msgctxt "support_fan_enable label"
+msgid "Fan Speed Override"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_fan_enable description"
+msgid ""
+"When enabled, the print cooling fan speed is altered for the skin regions "
+"immediately above the support."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_supported_skin_fan_speed label"
+msgid "Supported Skin Fan Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_supported_skin_fan_speed description"
+msgid ""
+"Percentage fan speed to use when printing the skin regions immediately above "
+"the support. Using a high fan speed can make the support easier to remove."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -4487,7 +4595,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "raft_base_line_spacing label"
-msgid "Raft Line Spacing"
+msgid "Raft Base Line Spacing"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -4721,18 +4829,6 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "prime_tower_wall_thickness label"
-msgid "Prime Tower Thickness"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "prime_tower_wall_thickness description"
-msgid ""
-"The thickness of the hollow prime tower. A thickness larger than half the "
-"Prime Tower Minimum Volume will result in a dense prime tower."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "prime_tower_position_x label"
 msgid "Prime Tower X Position"
 msgstr ""
@@ -4777,32 +4873,6 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "dual_pre_wipe label"
-msgid "Wipe Nozzle After Switch"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "dual_pre_wipe description"
-msgid ""
-"After switching extruder, wipe the oozed material off of the nozzle on the "
-"first thing printed. This performs a safe slow wipe move at a place where "
-"the oozed material causes least harm to the surface quality of your print."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "prime_tower_purge_volume label"
-msgid "Prime Tower Purge Volume"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "prime_tower_purge_volume description"
-msgid ""
-"Amount of filament to be purged when wiping on the prime tower. Purging is "
-"useful for compensating the filament lost by oozing during inactivity of the "
-"nozzle."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "ooze_shield_enabled label"
 msgid "Enable Ooze Shield"
 msgstr ""
@@ -5403,6 +5473,20 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "minimum_polygon_circumference label"
+msgid "Minimum Polygon Circumference"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "minimum_polygon_circumference description"
+msgid ""
+"Polygons in sliced layers that have a circumference smaller than this amount "
+"will be filtered out. Lower values lead to higher resolution mesh at the "
+"cost of slicing time. It is meant mostly for high resolution SLA printers "
+"and very tiny 3D models with a lot of details."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "meshfix_maximum_resolution label"
 msgid "Maximum Resolution"
 msgstr ""
@@ -6204,6 +6288,30 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "wall_overhang_angle label"
+msgid "Overhanging Wall Angle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_overhang_angle description"
+msgid ""
+"Walls that overhang more than this angle will be printed using overhanging "
+"wall settings. When the value is 90, no walls will be treated as overhanging."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_overhang_speed_factor label"
+msgid "Overhanging Wall Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_overhang_speed_factor description"
+msgid ""
+"Overhanging walls will be printed at this percentage of their normal print "
+"speed."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "bridge_settings_enabled label"
 msgid "Enable Bridge Settings"
 msgstr ""
@@ -6242,22 +6350,6 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "bridge_wall_max_overhang label"
-msgid "Bridge Wall Max Overhang"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "bridge_wall_max_overhang description"
-msgid ""
-"The maximum allowed width of the region of air below a wall line before the "
-"wall is printed using bridge settings. Expressed as a percentage of the wall "
-"line width. When the air gap is wider than this, the wall line is printed "
-"using the bridge settings. Otherwise, the wall line is printed using the "
-"normal settings. The lower the value, the more likely it is that overhung "
-"wall lines will be printed using bridge settings."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "bridge_wall_coast label"
 msgid "Bridge Wall Coasting"
 msgstr ""