Update translation templates for Cura 3.1

Generated by calling 'make extract-messages'. This commit introduces a string freeze for Cura 3.1.

Contributes to issue CURA-4601.

1 files changed, 296 insertions, 185 deletions

diff --git a/resources/i18n/fdmprinter.def.json.pot b/resources/i18n/fdmprinter.def.json.pot
index 460e508eb9..9d5ef93fc3 100644
--- a/resources/i18n/fdmprinter.def.json.pot
+++ b/resources/i18n/fdmprinter.def.json.pot
@@ -5,7 +5,7 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 3.0\n"
+"Project-Id-Version: Cura 3.1\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
 "POT-Creation-Date: 2017-08-02 16:53+0000\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
@@ -652,6 +652,38 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "slicing_tolerance label"
+msgid "Slicing Tolerance"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "slicing_tolerance description"
+msgid ""
+"How to slice layers with diagonal surfaces. The areas of a layer can be "
+"generated based on where the middle of the layer intersects the surface "
+"(Middle). Alternatively each layer can have the areas which fall inside of "
+"the volume throughout the height of the layer (Exclusive) or a layer has the "
+"areas which fall inside anywhere within the layer (Inclusive). Exclusive "
+"retains the most details, Inclusive makes for the best fit and Middle takes "
+"the least time to process."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "slicing_tolerance option middle"
+msgid "Middle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "slicing_tolerance option exclusive"
+msgid "Exclusive"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "slicing_tolerance option inclusive"
+msgid "Inclusive"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "line_width label"
 msgid "Line Width"
 msgstr ""
@@ -810,6 +842,18 @@ msgid "Shell"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "wall_extruder_nr label"
+msgid "Wall Extruder"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "wall_extruder_nr description"
+msgid ""
+"The extruder train used for printing the walls. This is used in multi-"
+"extrusion."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wall_0_extruder_nr label"
 msgid "Outer Wall Extruder"
 msgstr ""
@@ -823,7 +867,7 @@ msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "wall_x_extruder_nr label"
-msgid "Inner Walls Extruder"
+msgid "Inner Wall Extruder"
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1340,6 +1384,117 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "ironing_enabled label"
+msgid "Enable Ironing"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_enabled description"
+msgid ""
+"Go over the top surface one additional time, but without extruding material. "
+"This is meant to melt the plastic on top further, creating a smoother "
+"surface."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_only_highest_layer label"
+msgid "Iron Only Highest Layer"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_only_highest_layer description"
+msgid ""
+"Only perform ironing on the very last layer of the mesh. This saves time if "
+"the lower layers don't need a smooth surface finish."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_pattern label"
+msgid "Ironing Pattern"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_pattern description"
+msgid "The pattern to use for ironing top surfaces."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_pattern option concentric"
+msgid "Concentric"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_pattern option zigzag"
+msgid "Zig Zag"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_line_spacing label"
+msgid "Ironing Line Spacing"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_line_spacing description"
+msgid "The distance between the lines of ironing."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_flow label"
+msgid "Ironing Flow"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_flow description"
+msgid ""
+"The amount of material, relative to a normal skin line, to extrude during "
+"ironing. Keeping the nozzle filled helps filling some of the crevices of the "
+"top surface, but too much results in overextrusion and blips on the side of "
+"the surface."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_inset label"
+msgid "Ironing Inset"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "ironing_inset description"
+msgid ""
+"A distance to keep from the edges of the model. Ironing all the way to the "
+"edge of the mesh may result in a jagged edge on your print."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "speed_ironing label"
+msgid "Ironing Speed"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "speed_ironing description"
+msgid "The speed at which to pass over the top surface."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_ironing label"
+msgid "Ironing Acceleration"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_ironing description"
+msgid "The acceleration with which ironing is performed."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_ironing label"
+msgid "Ironing Jerk"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_ironing description"
+msgid "The maximum instantaneous velocity change while performing ironing."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr ""
@@ -1392,9 +1547,10 @@ msgctxt "infill_pattern description"
 msgid ""
 "The pattern of the infill material of the print. The line and zig zag infill "
 "swap direction on alternate layers, reducing material cost. The grid, "
-"triangle, cubic, octet, quarter cubic and concentric patterns are fully "
-"printed every layer. Cubic, quarter cubic and octet infill change with every "
-"layer to provide a more equal distribution of strength over each direction."
+"triangle, tri-hexagon, cubic, octet, quarter cubic, cross and concentric "
+"patterns are fully printed every layer. Cubic, quarter cubic and octet "
+"infill change with every layer to provide a more equal distribution of "
+"strength over each direction."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -1413,6 +1569,11 @@ msgid "Triangles"
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "infill_pattern option trihexagon"
+msgid "Tri-Hexagon"
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "infill_pattern option cubic"
 msgid "Cubic"
 msgstr ""
@@ -1465,9 +1626,9 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "zig_zaggify_infill description"
 msgid ""
-"Connect the ends where the infill pattern meets the inner wall using a lines "
+"Connect the ends where the infill pattern meets the inner wall using a line "
 "which follows the shape of the inner wall. Enabling this setting can make "
-"the infill adhere to the walls better and reduces the effects on infill on "
+"the infill adhere to the walls better and reduce the effects of infill on "
 "the quality of vertical surfaces. Disabling this setting reduces the amount "
 "of material used."
 msgstr ""
@@ -1489,6 +1650,26 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "infill_offset_x label"
+msgid "Infill X Offset"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_offset_x description"
+msgid "The infill pattern is offset this distance along the X axis."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_offset_y label"
+msgid "Infill Y Offset"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "infill_offset_y description"
+msgid "The infill pattern is offset this distance along the Y axis."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "sub_div_rad_add label"
 msgid "Cubic Subdivision Shell"
 msgstr ""
@@ -1876,6 +2057,26 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "material_adhesion_tendency label"
+msgid "Adhesion Tendency"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_adhesion_tendency description"
+msgid "Surface adhesion tendency."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_surface_energy label"
+msgid "Surface Energy"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "material_surface_energy description"
+msgid "Surface energy."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "material_flow label"
 msgid "Flow"
 msgstr ""
@@ -3254,42 +3455,6 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "support_skip_some_zags label"
-msgid "Break Up Support In Chunks"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "support_skip_some_zags description"
-msgid ""
-"Skip some support line connections to make the support structure easier to "
-"break away. This setting is applicable to the Zig Zag support infill pattern."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "support_skip_zag_per_mm label"
-msgid "Support Chunk Size"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "support_skip_zag_per_mm description"
-msgid ""
-"Leave out a connection between support lines once every N millimeter to make "
-"the support structure easier to break away."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "support_zag_skip_count label"
-msgid "Support Chunk Line Count"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "support_zag_skip_count description"
-msgid ""
-"Skip one in every N connection lines to make the support structure easier to "
-"break away."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "support_infill_rate label"
 msgid "Support Density"
 msgstr ""
@@ -3913,7 +4078,7 @@ msgstr ""
 msgctxt "skirt_gap description"
 msgid ""
 "The horizontal distance between the skirt and the first layer of the print.\n"
-"This is the minimum distance, multiple skirt lines will extend outwards from "
+"This is the minimum distance. Multiple skirt lines will extend outwards from "
 "this distance."
 msgstr ""
 
@@ -3970,32 +4135,6 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "z_offset_layer_0 label"
-msgid "Initial Layer Z Offset"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "z_offset_layer_0 description"
-msgid ""
-"The extruder is offset from the normal height of the first layer by this "
-"amount. It can be positive (raised) or negative (lowered). Some filament "
-"types adhere to the build plate better if the extruder is raised slightly."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "z_offset_taper_layers label"
-msgid "Z Offset Taper Layers"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "z_offset_taper_layers description"
-msgid ""
-"When non-zero, the Z offset is reduced to 0 over that many layers. A value "
-"of 0 means that the Z offset remains constant for all the layers in the "
-"print."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "raft_margin label"
 msgid "Raft Extra Margin"
 msgstr ""
@@ -4016,10 +4155,10 @@ msgstr ""
 #: fdmprinter.def.json
 msgctxt "raft_smoothing description"
 msgid ""
-"This setting control how much inner corners in the raft outline are rounded. "
-"Inward corners are rounded to a semi circle with a radius equal to the value "
-"given here. This setting also removes holes in the raft outline which are "
-"smaller than such a circle."
+"This setting controls how much inner corners in the raft outline are "
+"rounded. Inward corners are rounded to a semi circle with a radius equal to "
+"the value given here. This setting also removes holes in the raft outline "
+"which are smaller than such a circle."
 msgstr ""
 
 #: fdmprinter.def.json
@@ -4561,6 +4700,20 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "meshfix_maximum_resolution label"
+msgid "Maximum Resolution"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "meshfix_maximum_resolution description"
+msgid ""
+"The minimum size of a line segment after slicing. If you increase this, the "
+"mesh will have a lower resolution. This may allow the printer to keep up "
+"with the speed it has to process g-code and will increase slice speed by "
+"removing details of the mesh that it can't process anyway."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "multiple_mesh_overlap label"
 msgid "Merged Meshes Overlap"
 msgstr ""
@@ -4599,6 +4752,19 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "remove_empty_first_layers label"
+msgid "Remove Empty First Layers"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "remove_empty_first_layers description"
+msgid ""
+"Remove empty layers beneath the first printed layer if they are present. "
+"Disabling this setting can cause empty first layers if the Slicing Tolerance "
+"setting is set to Exclusive or Middle."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "blackmagic label"
 msgid "Special Modes"
 msgstr ""
@@ -4853,6 +5019,42 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "support_skip_some_zags label"
+msgid "Break Up Support In Chunks"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_skip_some_zags description"
+msgid ""
+"Skip some support line connections to make the support structure easier to "
+"break away. This setting is applicable to the Zig Zag support infill pattern."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_skip_zag_per_mm label"
+msgid "Support Chunk Size"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_skip_zag_per_mm description"
+msgid ""
+"Leave out a connection between support lines once every N millimeter to make "
+"the support structure easier to break away."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_zag_skip_count label"
+msgid "Support Chunk Line Count"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "support_zag_skip_count description"
+msgid ""
+"Skip one in every N connection lines to make the support structure easier to "
+"break away."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "draft_shield_enabled label"
 msgid "Enable Draft Shield"
 msgstr ""
@@ -5211,6 +5413,26 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
+msgctxt "flow_rate_max_extrusion_offset label"
+msgid "Flow rate compensation max extrusion offset"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "flow_rate_max_extrusion_offset description"
+msgid "The maximum distance in mm to compensate."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "flow_rate_extrusion_offset_factor label"
+msgid "Flow rate compensation factor"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "flow_rate_extrusion_offset_factor description"
+msgid "The multiplication factor for the flow rate -> distance translation."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "wireframe_enabled label"
 msgid "Wire Printing"
 msgstr ""
@@ -5524,117 +5746,6 @@ msgid ""
 msgstr ""
 
 #: fdmprinter.def.json
-msgctxt "ironing_enabled label"
-msgid "Enable Ironing"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_enabled description"
-msgid ""
-"Go over the top surface one additional time, but without extruding material. "
-"This is meant to melt the plastic on top further, creating a smoother "
-"surface."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_only_highest_layer label"
-msgid "Iron Only Highest Layer"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_only_highest_layer description"
-msgid ""
-"Only perform ironing on the very last layer of the mesh. This saves time if "
-"the lower layers don't need a smooth surface finish."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_pattern label"
-msgid "Ironing Pattern"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_pattern description"
-msgid "The pattern to use for ironing top surfaces."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_pattern option concentric"
-msgid "Concentric"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_pattern option zigzag"
-msgid "Zig Zag"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_line_spacing label"
-msgid "Ironing Line Spacing"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_line_spacing description"
-msgid "The distance between the lines of ironing."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_flow label"
-msgid "Ironing Flow"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_flow description"
-msgid ""
-"The amount of material, relative to a normal skin line, to extrude during "
-"ironing. Keeping the nozzle filled helps filling some of the crevices of the "
-"top surface, but too much results in overextrusion and blips on the side of "
-"the surface."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_inset label"
-msgid "Ironing Inset"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "ironing_inset description"
-msgid ""
-"A distance to keep from the edges of the model. Ironing all the way to the "
-"edge of the mesh may result in a jagged edge on your print."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "speed_ironing label"
-msgid "Ironing Speed"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "speed_ironing description"
-msgid "The speed at which to pass over the top surface."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "acceleration_ironing label"
-msgid "Ironing Acceleration"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "acceleration_ironing description"
-msgid "The acceleration with which ironing is performed."
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "jerk_ironing label"
-msgid "Ironing Jerk"
-msgstr ""
-
-#: fdmprinter.def.json
-msgctxt "jerk_ironing description"
-msgid "The maximum instantaneous velocity change while performing ironing."
-msgstr ""
-
-#: fdmprinter.def.json
 msgctxt "command_line_settings label"
 msgid "Command Line Settings"
 msgstr ""