Update translation files from updated templates

This brings the new translated strings into the files for each language.

Contributes to issue CURA-9420.

3 files changed, 4596 insertions, 4388 deletions

diff --git a/resources/i18n/hu_HU/cura.po b/resources/i18n/hu_HU/cura.po
index 63771e1a88..69f0c120e7 100644
--- a/resources/i18n/hu_HU/cura.po
+++ b/resources/i18n/hu_HU/cura.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-04-13 10:49+0200\n"
+"POT-Creation-Date: 2022-06-21 12:50+0200\n"
 "PO-Revision-Date: 2020-03-24 09:36+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: ATI-SZOFT\n"
@@ -17,489 +17,813 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.2.4\n"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Előkészítés"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Ismeretlen"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileWriter/__init__.py:14
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura Profil"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Az alábbi nyomtató (k) nem csatlakoztathatók, mert egy csoporthoz tartoznak"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Elérhető hálózati nyomtatók"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA digitális eszközcsere"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:219
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Nincs felülírva"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF Bináris"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:138
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Connected printers"
+msgstr "Csatlakoztatott nyomtatók"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF beágyazott JSON"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:138
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+msgctxt "@label"
+msgid "Preset printers"
+msgstr "Előre beállított nyomtatók"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford háromszög formátum"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:143
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Tömörített COLLADA digitális eszközcsere"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:61
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
+msgctxt "@label"
+msgid "Default"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Nem sikerült elérni a frissítési információkat."
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:65
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
+msgctxt "@label"
+msgid "Visual"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:66
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s stable firmware available"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:70
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
+msgctxt "@label"
+msgid "Engineering"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Hogyan frissíts"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:71
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Monitor"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:75
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
+msgctxt "@label"
+msgid "Draft"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Save to Removable Drive"
-msgstr "Mentés külső meghajtóra"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentSelectionModel.py:76
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:232
+msgctxt "@label"
+msgid "Custom Material"
+msgstr "Egyedi anyag"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:233
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:340
+msgctxt "@label"
+msgid "Custom"
+msgstr "Egyedi"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:391
+msgctxt "@label"
+msgid "Custom profiles"
+msgstr "Egyéni profil"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:426
 #, python-brace-format
 msgctxt "@item:inlistbox"
-msgid "Save to Removable Drive {0}"
-msgstr "Mentés külső meghajtóra {0}"
+msgid "All Supported Types ({0})"
+msgstr "Összes támasz típus ({0})"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
-msgctxt "@info:status"
-msgid "There are no file formats available to write with!"
-msgstr "Nincsenek elérhető fájlformátumok az íráshoz!"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:427
+msgctxt "@item:inlistbox"
+msgid "All Files (*)"
+msgstr "Minden fájl (*)"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:97
-#, python-brace-format
-msgctxt "@info:progress Don't translate the XML tags <filename>!"
-msgid "Saving to Removable Drive <filename>{0}</filename>"
-msgstr "Mentés külső meghajóra <filename>{0}</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualitySettingsModel.py:182
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Számított"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:98
+#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:190
 msgctxt "@info:title"
-msgid "Saving"
-msgstr "Mentés"
+msgid "Login failed"
+msgstr "Sikertelen bejelentkezés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:108
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:111
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "Sikertelen mentés <filename>{0}</filename>: <message>{1}</message>"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Új hely keresése az objektumokhoz"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:127
-#, python-brace-format
-msgctxt "@info:status Don't translate the tag {device}!"
-msgid "Could not find a file name when trying to write to {device}."
-msgstr "Nem található a fájlnév {device} -on az írási művelethez."
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
+msgctxt "@info:title"
+msgid "Finding Location"
+msgstr "Hely keresés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:140
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:159
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:99
 msgctxt "@info:status"
-msgid "Could not save to removable drive {0}: {1}"
-msgstr "Sikertelen mentés a {0}: {1} meghajtóra."
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Nincs elég hely az összes objektum építési térfogatához"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:141
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:161
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1782
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:156
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:166
+#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Error"
-msgstr "Hiba"
+msgid "Can't Find Location"
+msgstr "Nem találok helyet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:150
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Saved to Removable Drive {0} as {1}"
-msgstr "Mentve a {0} meghajtóra, mint {1}"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:115
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Nem sikerült archívumot létrehozni a felhasználói adatkönyvtárból: {}"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:151
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:122
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:159
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
 msgctxt "@info:title"
-msgid "File Saved"
-msgstr "Fájl Mentve"
+msgid "Backup"
+msgstr "Biztonsági mentés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-msgctxt "@action:button"
-msgid "Eject"
-msgstr "Leválaszt"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Megpróbált visszaállítani egy Cura biztonsági másolatot anélkül, hogy megfelelő adatok vagy meta adatok lennének."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#, python-brace-format
-msgctxt "@action"
-msgid "Eject removable device {0}"
-msgstr "{0} meghajtó leválasztása"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:145
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Egy olyan Cura biztonsági mentést próbált visszaállítani, amelyiknek a verziója magasabb a jelenlegitől."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:172
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:158
+msgctxt "@info:backup_failed"
+msgid "The following error occurred while trying to restore a Cura backup:"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
 msgctxt "@info:status"
-msgid "Ejected {0}. You can now safely remove the drive."
-msgstr "{0} leválasztva. Eltávolíthatod az adathordozót."
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "Az nyomtatási szint csökken a \"Nyomtatási sorrend\" beállítása miatt, ez megakadályozza, hogy a mechanika beleütközzön a nyomtatott tárgyba."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
+#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:103
 msgctxt "@info:title"
-msgid "Safely Remove Hardware"
-msgstr "Hardver biztonságos eltávolítása"
+msgid "Build Volume"
+msgstr "Építési térfogat"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:176
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Failed to eject {0}. Another program may be using the drive."
-msgstr "{0} leválasztása sikertelen. A meghajtó használatban van."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+msgctxt "@title:window"
+msgid "Cura can't start"
+msgstr "A Cura nem tud elindulni"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:177
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1770
-#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:217
-msgctxt "@info:title"
-msgid "Warning"
-msgstr "Figyelem"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+msgctxt "@label crash message"
+msgid ""
+"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
+"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
+"                    <p>Backups can be found in the configuration folder.</p>\n"
+"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
+"                "
+msgstr ""
+"<p><b>Hoppá, az Ultimaker Cura olyan dolgokkal találkozott, amelyek hibásnak tűnnek.</p></b>\n"
+"                    <p>Az indítás során helyrehozhatatlan hibát tapasztaltunkEzt valószínűleg néhány helytelen konfigurációs fájl okozta. Javasoljuk, hogy biztonsági másolatból állítsa vissza a konfigurációt.</p>\n"
+"                    <p>A biztonsági mentések a konfigurációs mappában találhatók.</p>\n"
+"                    <p>Kérjük, küldje el nekünk ezt a hibajelentést a probléma megoldásához.</p>\n"
+"                "
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
-msgctxt "@item:intext"
-msgid "Removable Drive"
-msgstr "Cserélhető meghajtó"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+msgctxt "@action:button"
+msgid "Send crash report to Ultimaker"
+msgstr "Hibajelentés küldése az Ultimaker -nek"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF fájl"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+msgctxt "@action:button"
+msgid "Show detailed crash report"
+msgstr "Hibajelentés részletei"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPReader/__init__.py:22
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker formátumcsomag"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+msgctxt "@action:button"
+msgid "Show configuration folder"
+msgstr "Konfigurációs mappa megnyitása"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+msgctxt "@action:button"
+msgid "Backup and Reset Configuration"
+msgstr "Konfiguráció biztonsági mentés és visszaállítás"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+msgctxt "@title:window"
+msgid "Crash Report"
+msgstr "Összeomlás jelentés"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+msgctxt "@label crash message"
+msgid ""
+"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
+"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
+"        "
+msgstr ""
+"<p><b>Végzetes hiba történt Cura-ban. Kérjük, küld el nekünk az összeomlás jelentését, hogy javítani tudjuk a hibát.</p></b>\n"
+"            <p>Kérjük használd a \"Jelentés küldés\" gombot a hibajelentés postázásához,  így az automatikusan a szerverünkre kerül.</p>\n"
+"        "
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+msgctxt "@title:groupbox"
+msgid "System information"
+msgstr "Rendszer információ"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+msgctxt "@label unknown version of Cura"
+msgid "Unknown"
+msgstr "Ismeretlen"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+msgctxt "@label Cura version number"
+msgid "Cura version"
+msgstr "Cura verzió"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Modellenkénti beállítások"
+msgid "Cura language"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Modellenkénti beállítások konfigurálása"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+msgctxt "@label"
+msgid "OS language"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Firmware frissítés"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+msgctxt "@label Type of platform"
+msgid "Platform"
+msgstr "Felület"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+msgctxt "@label"
+msgid "Qt version"
+msgstr "Qt verzió"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+msgctxt "@label"
+msgid "PyQt version"
+msgstr "PyQt verzió"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+msgctxt "@label OpenGL version"
+msgid "OpenGL"
+msgstr "OpenGL"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+msgctxt "@label"
+msgid "Not yet initialized"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
 #, python-brace-format
-msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "A Cura olyan anyagprofilt észlel, amelyet még nem telepítettek a(z) {0} csoport gazdanyomtatójára."
+msgctxt "@label OpenGL version"
+msgid "<li>OpenGL Version: {version}</li>"
+msgstr "<li>OpenGL Verzió: {version}</li>"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "Anyagok küldése a nyomtatóra"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#, python-brace-format
+msgctxt "@label OpenGL vendor"
+msgid "<li>OpenGL Vendor: {vendor}</li>"
+msgstr "<li>OpenGL terjesztő: {vendor}</li>"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
 #, python-brace-format
-msgctxt "@info:status"
-msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
-msgstr "Megpróbált csatlakozni a (z) {0} -hez, de a gép nem része a csoportnak.Látogasson el a weboldalra, és konfigurálhatja azt csoporttagnak."
+msgctxt "@label OpenGL renderer"
+msgid "<li>OpenGL Renderer: {renderer}</li>"
+msgstr "<li>OpenGL Renderer: {renderer}</li>"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
-msgctxt "@info:title"
-msgid "Not a group host"
-msgstr "Nem csoport"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:304
+msgctxt "@title:groupbox"
+msgid "Error traceback"
+msgstr "Hibakövetés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
-msgctxt "@action"
-msgid "Configure group"
-msgstr "Csoport konfiguráció"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:390
+msgctxt "@title:groupbox"
+msgid "Logs"
+msgstr "Naplók"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
-msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Nyomtatási feladat küldése"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:418
+msgctxt "@action:button"
+msgid "Send report"
+msgstr "Jelentés küldés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "A nyomtatási feladat feltöltése a nyomtatóra."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:531
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Gépek betöltése ..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
-msgctxt "@info:status"
-msgid "Print job queue is full. The printer can't accept a new job."
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:538
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
-msgctxt "@info:title"
-msgid "Queue Full"
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:683
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:823
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:837
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:905
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Felület beállítása..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:941
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Interfészek betöltése..."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:946
+msgctxt "@info:progress"
+msgid "Initializing engine..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1272
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1798
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Please wait until the current job has been sent."
-msgstr "Várja meg, amíg az aktuális feladat elküldésre kerül."
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Egyszerre csak egy G-kód fájlt lehet betölteni. Az importálás kihagyva {0}"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1800
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:217
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:189
 msgctxt "@info:title"
-msgid "Print error"
-msgstr "Nyomtatási hiba"
+msgid "Warning"
+msgstr "Figyelem"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1810
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Print job was successfully sent to the printer."
-msgstr "A nyomtatási feladat sikeresen elküldésre került a nyomtatóra."
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Nem nyitható meg más fájl, ha a G-kód betöltődik. Az importálás kihagyva {0}"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1812
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:166
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:173
 msgctxt "@info:title"
-msgid "Data Sent"
-msgstr "Adatok elküldve"
+msgid "Error"
+msgstr "Hiba"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:30
 msgctxt "@info:status"
-msgid ""
-"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
-" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory"
-msgstr ""
+msgid "Multiplying and placing objects"
+msgstr "Tárgyak többszörözése és elhelyezése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:32
 msgctxt "@info:title"
-msgid "Are you ready for cloud printing?"
+msgid "Placing Objects"
+msgstr "Tárgyak elhelyezése"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:100
+msgctxt "@info:title"
+msgid "Placing Object"
+msgstr "Tárgy elhelyezése"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:89
+msgctxt "@message"
+msgid "Could not read response."
+msgstr "Nincs olvasható válasz."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+msgctxt "@message"
+msgid "The provided state is not correct."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
-msgctxt "@action"
-msgid "Get started"
-msgstr "Kezdjük el"
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+msgctxt "@message"
+msgid "Timeout when authenticating with the account server."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
-msgctxt "@action"
-msgid "Learn more"
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
+msgctxt "@message"
+msgid "Please give the required permissions when authorizing this application."
+msgstr "Kérjük, adja meg a szükséges jogosultságokat az alkalmazás engedélyezéséhez."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
+msgctxt "@message"
+msgid "Something unexpected happened when trying to log in, please try again."
+msgstr "Valami váratlan esemény történt a bejelentkezéskor, próbálkozzon újra."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:216
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
-msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "Olyan nyomtatóval próbál csatlakozni, amelyen nem fut az Ultimaker Connect. Kérjük, frissítse a nyomtatón a firmware-t."
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:277
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Az Ultimaker fiókkiszolgáló elérhetetlen."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:278
 msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Frissítse a nyomtatót"
+msgid "Log-in failed"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
-msgctxt "@info:text"
-msgid "Could not upload the data to the printer."
-msgstr "Nem sikerült feltölteni az adatokat a nyomtatóra."
+#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
+msgctxt "@text:error"
+msgid "Failed to create archive of materials to sync with printers."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
-msgctxt "@info:title"
-msgid "Network error"
-msgstr "Hálózati hiba"
+#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
+#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
+msgctxt "@text:error"
+msgid "Failed to load the archive of materials to sync it with printers."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print over network"
-msgstr "Hálózati nyomtatás"
+#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
+msgctxt "@text:error"
+msgid "The response from Digital Factory appears to be corrupted."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
-msgctxt "@properties:tooltip"
-msgid "Print over network"
-msgstr "Hálózati nyomtatás"
+#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
+#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
+#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
+msgctxt "@text:error"
+msgid "The response from Digital Factory is missing important information."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
-msgctxt "@info:status"
-msgid "Connected over the network"
-msgstr "Csatlakozva hálózaton keresztül"
+#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "holnap"
+#: /home/trin/Gedeeld/Projects/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
+msgctxt "@text:error"
+msgid "Failed to connect to Digital Factory."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:207
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:140
+msgctxt "@title:window"
+msgid "File Already Exists"
+msgstr "A fájl már létezik"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:208
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:141
+#, python-brace-format
+msgctxt "@label Don't translate the XML tag <filename>!"
+msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
+msgstr "A <filename>{0}</filename> fájl már létezik. Biztosan szeretnéd, hogy felülírjuk?"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:459
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:462
 msgctxt "@info:status"
-msgid "today"
-msgstr "ma"
+msgid "Invalid file URL:"
+msgstr "Érvénytelen fájl URL:"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
-msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Hálózati csatlakozás"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "A profil exportálása nem sikerült <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
-msgctxt "info:status"
-msgid "New printer detected from your Ultimaker account"
-msgid_plural "New printers detected from your Ultimaker account"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:163
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
+msgstr "A profil exportálása nem sikerült <filename>{0}</filename>:Az író beépülő modul hibát jelez."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:240
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:171
 #, python-brace-format
-msgctxt "info:status Filled in with printer name and printer model."
-msgid "Adding printer {name} ({model}) from your account"
-msgstr ""
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Exported profile to <filename>{0}</filename>"
+msgstr "Profil exportálva ide: <filename>{0}</filename>"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:257
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:173
+msgctxt "@info:title"
+msgid "Export succeeded"
+msgstr "Sikeres export"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:205
 #, python-brace-format
-msgctxt "info:{0} gets replaced by a number of printers"
-msgid "... and {0} other"
-msgid_plural "... and {0} others"
-msgstr[0] ""
-msgstr[1] ""
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>: {1}"
+msgstr "Sikertelen profil importálás <filename>{0}</filename>: {1} -ból"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:262
-msgctxt "info:status"
-msgid "Printers added from Digital Factory:"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:209
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
+msgstr "Nem importálható a profil <filename>{0}</filename> -ból, mielőtt hozzá nem adunk egy nyomtatót."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:328
-msgctxt "info:status"
-msgid "A cloud connection is not available for a printer"
-msgid_plural "A cloud connection is not available for some printers"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:224
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "No custom profile to import in file <filename>{0}</filename>"
+msgstr "Nincs egyéni profil a <filename>{0}</filename> fájlban, amelyet importálni lehetne"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
-msgctxt "info:status"
-msgid "This printer is not linked to the Digital Factory:"
-msgid_plural "These printers are not linked to the Digital Factory:"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:228
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "A profil importálása nem sikerült <filename>{0}</filename>:"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:432
-msgctxt "info:name"
-msgid "Ultimaker Digital Factory"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:252
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:262
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename>!"
+msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
+msgstr "Ez a <filename>{0}</filename> profil helytelen adatokat tartamaz, ezért nem importálható."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:346
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:355
 #, python-brace-format
-msgctxt "info:status"
-msgid "To establish a connection, please visit the {website_link}"
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Failed to import profile from <filename>{0}</filename>:"
+msgstr "Nem importálható a profil <filename>{0}</filename>:"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:359
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Successfully imported profile {0}."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:350
-msgctxt "@action:button"
-msgid "Keep printer configurations"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:366
+#, python-brace-format
+msgctxt "@info:status"
+msgid "File {0} does not contain any valid profile."
+msgstr "A {0} fájl nem tartalmaz érvényes profilt."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:369
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Profile {0} has an unknown file type or is corrupted."
+msgstr "A(z) {0} profil ismeretlen fájltípusú vagy sérült."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+msgctxt "@label"
+msgid "Custom profile"
+msgstr "Egyedi profil"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:459
+msgctxt "@info:status"
+msgid "Profile is missing a quality type."
+msgstr "Hiányzik a profil minőségi típusa."
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+msgctxt "@info:status"
+msgid "There is no active printer yet."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:355
-msgctxt "@action:button"
-msgid "Remove printers"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:469
+msgctxt "@info:status"
+msgid "Unable to add the profile."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:434
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:483
 #, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "{printer_name} will be removed until the next account sync."
+msgctxt "@info:status"
+msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:435
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:488
 #, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
+msgctxt "@info:status"
+msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:436
-#, python-brace-format
-msgctxt "@message {printer_name} is replaced with the name of the printer"
-msgid "Are you sure you want to remove {printer_name} temporarily?"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+msgctxt "@info:not supported profile"
+msgid "Not supported"
+msgstr "Nem támogatott"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+msgctxt "@info:No intent profile selected"
+msgid "Default"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:473
-msgctxt "@title:window"
-msgid "Remove printers?"
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:713
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:219
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Fúvóka"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:857
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "A beállításokat megváltoztattuk, hogy azok megfeleljenek az jelenleg elérhető extrudereknek:"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "Beállítások frissítve"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1480
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extruder(ek) kikapcsolva"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+msgctxt "@action:button"
+msgid "Add"
+msgstr "Hozzáad"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:290
+msgctxt "@action:button"
+msgid "Finish"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:476
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:508
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:323
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:139
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:291
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:74
+msgctxt "@action:button"
+msgid "Cancel"
+msgstr "Elvet"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
 #, python-brace-format
 msgctxt "@label"
-msgid ""
-"You are about to remove {0} printer from Cura. This action cannot be undone.\n"
-"Are you sure you want to continue?"
-msgid_plural ""
-"You are about to remove {0} printers from Cura. This action cannot be undone.\n"
-"Are you sure you want to continue?"
-msgstr[0] ""
-msgstr[1] ""
+msgid "Group #{group_nr}"
+msgstr "Csoport #{group_nr}"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
-msgctxt "@label"
-msgid ""
-"You are about to remove all printers from Cura. This action cannot be undone.\n"
-"Are you sure you want to continue?"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+msgctxt "@tooltip"
+msgid "Outer Wall"
+msgstr "Külső fal"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+msgctxt "@tooltip"
+msgid "Inner Walls"
+msgstr "Belső falak"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+msgctxt "@tooltip"
+msgid "Skin"
+msgstr "Héj"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+msgctxt "@tooltip"
+msgid "Infill"
+msgstr "Kitöltés"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+msgctxt "@tooltip"
+msgid "Support Infill"
+msgstr "Támasz kitöltés"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+msgctxt "@tooltip"
+msgid "Support Interface"
+msgstr "Támasz interface"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+msgctxt "@tooltip"
+msgid "Support"
+msgstr "Támasz"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+msgctxt "@tooltip"
+msgid "Skirt"
+msgstr "Szoknya"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+msgctxt "@tooltip"
+msgid "Prime Tower"
+msgstr "Elsődleges torony"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+msgctxt "@tooltip"
+msgid "Travel"
+msgstr "Átmozgás"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:95
+msgctxt "@tooltip"
+msgid "Retractions"
+msgstr "Visszahúzás"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:96
+msgctxt "@tooltip"
+msgid "Other"
+msgstr "Egyéb"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:37
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/TextManager.py:63
+msgctxt "@text:window"
+msgid "The release notes could not be opened."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:57
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:277
 msgctxt "@action:button"
-msgid "Print via cloud"
+msgid "Next"
+msgstr "Következő"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:286
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:67
+msgctxt "@action:button"
+msgid "Skip"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:72
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:175
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:443
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:186
+msgctxt "@action:button"
+msgid "Close"
+msgstr "Bezár"
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
+msgctxt "@action:button"
+msgid "Please sync the material profiles with your printers before starting to print."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
-msgctxt "@info:status"
-msgid "Connected via cloud"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
+msgctxt "@action:button"
+msgid "New materials installed"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
 msgctxt "@action:button"
-msgid "Monitor print"
+msgid "Sync materials"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
-msgctxt "@action:tooltip"
-msgid "Track the print in Ultimaker Digital Factory"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:397
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:80
+msgctxt "@action:button"
+msgid "Learn more"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
+#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
+msgctxt "@message:text"
+msgid "Could not save material archive to {}:"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:31
+#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
+msgctxt "@message:title"
+msgid "Failed to save material archive"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
+msgctxt "@text"
+msgid "Unknown error."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
 msgctxt "@info:title"
 msgid "3D Model Assistant"
 msgstr "3D-s modellsegéd"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ModelChecker/ModelChecker.py:97
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:97
 #, python-brace-format
 msgctxt "@info:status"
 msgid ""
@@ -513,156 +837,229 @@ msgstr ""
 "<p>Itt Megtudhatja, hogyan lehet a lehető legjobb nyomtatási minőséget és megbízhatóságot biztosítani.</p>\n"
 "<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:129
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:545
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "A projekt fájl <filename>{0}</filename> egy ismeretlen <message>{1}</message> géptípust tartalmaz.Gépet nem lehet importálni. Importálj helyette modelleket."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:130
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:548
 msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Szimuláció nézet"
+msgid "Open Project File"
+msgstr "Projekt fájl megnyitása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:133
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:650
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:134
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:651
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:659
 msgctxt "@info:title"
-msgid "No layers to show"
+msgid "Can't Open Project File"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationView.py:136
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:74
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:658
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Réteg nézet"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:711
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "A GCodeWriter nem támogatja a szöveges nélüli módot."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:212
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Ajánlott"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:80
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Készítse elő a G-kódot az exportálás előtt."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:214
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Egyedi"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeWriter/__init__.py:16
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeProfileReader/__init__.py:14
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code Fájl"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:390
+msgctxt "@info:status"
+msgid "The material used in this project relies on some material definitions not available in Cura, this might produce undesirable print results. We highly recommend installing the full material package from the Marketplace."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWriter.py:226
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Hiba a 3mf fájl írásakor."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:392
+msgctxt "@info:title"
+msgid "Material profiles not installed"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:405
+msgctxt "@action:button"
+msgid "Install Materials"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
+msgctxt "@item:inlistbox"
+msgid "3MF File"
+msgstr "3MF fájl"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
 msgctxt "@error:zip"
 msgid "3MF Writer plug-in is corrupt."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:37
 msgctxt "@error"
 msgid "There is no workspace yet to write. Please add a printer first."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:64
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:97
 msgctxt "@error:zip"
 msgid "No permission to write the workspace here."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:101
 msgctxt "@error:zip"
 msgid "The operating system does not allow saving a project file to this location or with this file name."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:26
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:238
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Hiba a 3mf fájl írásakor."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:282
+#, python-brace-format
+msgctxt "@error:material"
+msgid "It was not possible to store material package information in project file: {material}. This project may not open correctly on other systems."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:283
+msgctxt "@info:title"
+msgid "Failed to save material package information"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:28
 msgctxt "@item:inlistbox"
 msgid "3MF file"
 msgstr "3MF fájl"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFWriter/__init__.py:34
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:36
 msgctxt "@item:inlistbox"
 msgid "Cura Project 3MF file"
 msgstr "Cura projekt 3MF fájl"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzReader/__init__.py:17
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Tömörített G-kód fájl"
+msgid "AMF File"
+msgstr "AMF fájl"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Biztonsági mentések"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Hiba történt a biztonsági mentés feltöltése közben."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "A biztonsági mentés feltöltése ..."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "A biztonsági mentés feltöltése befejeződött."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Hiba történt a biztonsági másolat visszaállításakor."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Bitonsági mentések kezelése"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:161
 msgctxt "@message"
 msgid "Slicing failed with an unexpected error. Please consider reporting a bug on our issue tracker."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:162
 msgctxt "@message:title"
 msgid "Slicing failed"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:167
 msgctxt "@message:button"
 msgid "Report a bug"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:168
 msgctxt "@message:description"
 msgid "Report a bug on Ultimaker Cura's issue tracker."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:395
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:400
 msgctxt "@info:status"
 msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
 msgstr "Nem lehet szeletelni a jelenlegi alapanyaggal, mert nem kompatibilis a kiválasztott nyomtatóval, vagy a beállításaival."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:396
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:456
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:468
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:480
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:493
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:401
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:434
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:461
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:473
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:485
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:498
 msgctxt "@info:title"
 msgid "Unable to slice"
 msgstr "Nem lehet szeletelni"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:433
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Unable to slice with the current settings. The following settings have errors: {0}"
 msgstr "Nem lehet szeletelni ezekkel a beállításokkal. Ezek a beállítások okoznak hibát: {0}"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:460
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
 msgstr "Nem lehet szeletelni pár modell beállítás miatt. A következő beállításokokoznak hibát egy vagy több modellnél: {error_labels}"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:472
 msgctxt "@info:status"
 msgid "Unable to slice because the prime tower or prime position(s) are invalid."
 msgstr "Nem lehet szeletelni, mert az elsődleges torony, vagy az elsődleges pozíció érvénytelen."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:479
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:484
 #, python-format
 msgctxt "@info:status"
 msgid "Unable to slice because there are objects associated with disabled Extruder %s."
 msgstr "Nem lehet szeletelni, mert vannak olyan objektumok, amelyek a letiltott Extruderhez vannak társítva.%s."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:489
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:494
 msgctxt "@info:status"
 msgid ""
 "Please review settings and check if your models:\n"
@@ -671,4942 +1068,4699 @@ msgid ""
 "- Are not all set as modifier meshes"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
 msgid "Processing Layers"
 msgstr "Réteg feldolgozás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:261
 msgctxt "@info:title"
 msgid "Information"
 msgstr "Információ"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/X3DReader/__init__.py:13
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D Fájl"
+msgid "Cura Profile"
+msgstr "Cura Profil"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Nem sikerült elérni a frissítési információkat."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If you haven't done so already, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s stable firmware available"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Hogyan frissíts"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Firmware frissítés"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
+msgctxt "@item:inlistbox"
+msgid "Compressed G-code File"
+msgstr "Tömörített G-kód fájl"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "A GCodeGzWriter nem támogatja a nem szöveges módot."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code Fájl"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:350
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-kód elemzés"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:352
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:506
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "G-kód részletek"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:504
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Győződj meg róla, hogy a G-kód igazodik a nyomtatódhoz és beállításaihoz, mielőtt elküldöd a fájlt. A G-kód ábrázolása nem biztos, hogy pontos."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G fájl"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "A GCodeWriter nem támogatja a szöveges nélüli módot."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Készítse elő a G-kódot az exportálás előtt."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
 msgctxt "@item:inlistbox"
 msgid "JPG Image"
 msgstr "JPG kép"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:18
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
 msgctxt "@item:inlistbox"
 msgid "JPEG Image"
 msgstr "JPEG kép"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:22
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
 msgctxt "@item:inlistbox"
 msgid "PNG Image"
 msgstr "PNG kép"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:26
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
 msgctxt "@item:inlistbox"
 msgid "BMP Image"
 msgstr "BMP kép"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/__init__.py:30
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
 msgctxt "@item:inlistbox"
 msgid "GIF Image"
 msgstr "GIF kép"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:218
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:713
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Fúvóka"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:544
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "A projekt fájl <filename>{0}</filename> egy ismeretlen <message>{1}</message> géptípust tartalmaz.Gépet nem lehet importálni. Importálj helyette modelleket."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:547
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Projekt fájl megnyitása"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:644
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:645
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:653
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:652
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:705
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Ajánlott"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Egyedi"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:27
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF fájl"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:57
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:72
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:94
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:149
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UFPWriter/UFPWriter.py:159
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/LegacyProfileReader/__init__.py:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
 msgctxt "@item:inlistbox"
 msgid "Cura 15.04 profiles"
 msgstr "Cura 15.04 profil"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:25
-msgctxt "@info:title"
-msgid "Backups"
-msgstr "Biztonsági mentések"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Hiba történt a biztonsági mentés feltöltése közben."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Gép beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:46
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:144
+msgctxt "@info:generic"
+msgid "Do you want to sync material and software packages with your account?"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:55
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:145
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/DownloadPresenter.py:95
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:59
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "A biztonsági mentés feltöltése ..."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:69
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "A biztonsági mentés feltöltése befejeződött."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/CreateBackupJob.py:103
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/CloudPackageChecker.py:147
+msgctxt "@action:button"
+msgid "Sync"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:69
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Bitonsági mentések kezelése"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:118
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:126
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:122
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:159
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Biztonsági mentés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/DriveApiService.py:86
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:26
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Hiba történt a biztonsági másolat visszaállításakor."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
-msgctxt "@text"
-msgid "Unable to read example data file."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/DownloadPresenter.py:91
+msgctxt "@info:generic"
+msgid "Syncing..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "A GCodeGzWriter nem támogatja a nem szöveges módot."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Utólagos műveletek"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-kód módosítás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Támasz blokkoló"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Hozzon létre egy kötetet, amelyben a támaszok nem kerülnek nyomtatásra."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Előnézet"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/XRayView/__init__.py:12
-msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Röntgen nézet"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Tárgyasztal szint"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:12
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:79
+msgctxt "@button"
+msgid "Decline"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Válassz frissítést"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:13
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+msgctxt "@button"
+msgid "Agree"
+msgstr "Elfogadás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:43
-msgctxt "@label:property"
-msgid "Unknown Package"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicenseModel.py:77
+msgctxt "@title:window"
+msgid "Plugin License Agreement"
+msgstr "Kiegészítő licencszerződés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/PackageModel.py:66
-msgctxt "@label:property"
-msgid "Unknown Author"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/LicensePresenter.py:42
+msgctxt "@button"
+msgid "Decline and remove from account"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:116
-msgctxt "@info:error"
-msgid "Could not interpret the server's response."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/RestartApplicationPresenter.py:22
+msgctxt "@info:generic"
+msgid "You need to quit and restart {} before changes have effect."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/RemotePackageList.py:146
-msgctxt "@info:error"
-msgid "Could not reach Marketplace."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:28
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:28
 msgctxt "@label"
 msgid "Installed Plugins"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:29
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:29
 msgctxt "@label"
 msgid "Installed Materials"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:33
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:33
 msgctxt "@label"
 msgid "Bundled Plugins"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/LocalPackageList.py:34
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/LocalPackageList.py:34
 msgctxt "@label"
 msgid "Bundled Materials"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:71
-msgctxt "@info:status"
-msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/PackageModel.py:43
+msgctxt "@label:property"
+msgid "Unknown Package"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:title"
-msgid "Model Errors"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/PackageModel.py:66
+msgctxt "@label:property"
+msgid "Unknown Author"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/SolidView.py:80
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:71
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:82
-msgctxt "@action:button"
-msgid "Learn more"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/RemotePackageList.py:117
+msgctxt "@info:error"
+msgid "Could not interpret the server's response."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/RemotePackageList.py:148
+msgctxt "@info:error"
+msgid "Could not reach Marketplace."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SolidView/__init__.py:12
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
 msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Felület nézet"
+msgid "Monitor"
+msgstr "Monitor"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:350
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-kód elemzés"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Modellenkénti beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:352
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:506
-msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "G-kód részletek"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Modellenkénti beállítások konfigurálása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/FlavorParser.py:504
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Győződj meg róla, hogy a G-kód igazodik a nyomtatódhoz és beállításaihoz, mielőtt elküldöd a fájlt. A G-kód ábrázolása nem biztos, hogy pontos."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Utólagos műveletek"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G fájl"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-kód módosítás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Gép beállítások"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Előkészítés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
 msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB nyomtatás"
+msgid "Preview"
+msgstr "Előnézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Nyomtatás USB-ről"
+msgid "Save to Removable Drive"
+msgstr "Mentés külső meghajtóra"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Nyomtatás USB-ről"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#, python-brace-format
+msgctxt "@item:inlistbox"
+msgid "Save to Removable Drive {0}"
+msgstr "Mentés külső meghajtóra {0}"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Csatlakozás USB-n"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "USB nyomtatás folyamatban van, a Cura bezárása leállítja ezt a nyomtatást. Biztos vagy ebben?"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "A nyomtatás még folyamatban van. A Cura nem indíthat új nyomtatást USB-n keresztül, amíg az előző nyomtatás be nem fejeződött."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Nyomtatás folyamatban"
+msgid "There are no file formats available to write with!"
+msgstr "Nincsenek elérhető fájlformátumok az íráshoz!"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:529
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Gépek betöltése ..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#, python-brace-format
+msgctxt "@info:progress Don't translate the XML tags <filename>!"
+msgid "Saving to Removable Drive <filename>{0}</filename>"
+msgstr "Mentés külső meghajóra <filename>{0}</filename>"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:536
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:110
+msgctxt "@info:title"
+msgid "Saving"
+msgstr "Mentés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:678
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:120
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:123
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
+msgstr "Sikertelen mentés <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+#, python-brace-format
+msgctxt "@info:status Don't translate the tag {device}!"
+msgid "Could not find a file name when trying to write to {device}."
+msgstr "Nem található a fájlnév {device} -on az írási művelethez."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:816
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:152
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:171
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Could not save to removable drive {0}: {1}"
+msgstr "Sikertelen mentés a {0}: {1} meghajtóra."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:884
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Felület beállítása..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:162
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Saved to Removable Drive {0} as {1}"
+msgstr "Mentve a {0} meghajtóra, mint {1}"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:920
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Interfészek betöltése..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+msgctxt "@info:title"
+msgid "File Saved"
+msgstr "Fájl Mentve"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:925
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@action:button"
+msgid "Eject"
+msgstr "Leválaszt"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1242
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#, python-brace-format
+msgctxt "@action"
+msgid "Eject removable device {0}"
+msgstr "{0} meghajtó leválasztása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1768
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:184
 #, python-brace-format
 msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Egyszerre csak egy G-kód fájlt lehet betölteni. Az importálás kihagyva {0}"
+msgid "Ejected {0}. You can now safely remove the drive."
+msgstr "{0} leválasztva. Eltávolíthatod az adathordozót."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CuraApplication.py:1780
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:185
+msgctxt "@info:title"
+msgid "Safely Remove Hardware"
+msgstr "Hardver biztonságos eltávolítása"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:188
 #, python-brace-format
 msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Nem nyitható meg más fájl, ha a G-kód betöltődik. Az importálás kihagyva {0}"
+msgid "Failed to eject {0}. Another program may be using the drive."
+msgstr "{0} leválasztása sikertelen. A meghajtó használatban van."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:42
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:338
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:11
-msgctxt "@label"
-msgid "Default"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+msgctxt "@item:intext"
+msgid "Removable Drive"
+msgstr "Cserélhető meghajtó"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:45
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:129
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:46
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:130
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Szimuláció nézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:49
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:133
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:50
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:134
+msgctxt "@info:title"
+msgid "No layers to show"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:53
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:136
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentCategoryModel.py:54
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Réteg nézet"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/SliceInfo.py:95
 msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgid "Unable to read example data file."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/ExtrudersModel.py:219
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Nincs felülírva"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/GlobalStacksModel.py:143
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:361
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1614
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Ismeretlen"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Az alábbi nyomtató (k) nem csatlakoztathatók, mert egy csoporthoz tartoznak"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Felület nézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
 msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Elérhető hálózati nyomtatók"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualitySettingsModel.py:182
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Számított"
+msgid "Support Blocker"
+msgstr "Támasz blokkoló"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:55
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:66
-msgctxt "@action:button"
-msgid "Please sync the material profiles with your printers before starting to print."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
+msgctxt "@info:tooltip"
+msgid "Create a volume in which supports are not printed."
+msgstr "Hozzon létre egy kötetet, amelyben a támaszok nem kerülnek nyomtatásra."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:56
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:67
-msgctxt "@action:button"
-msgid "New materials installed"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:63
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:74
-msgctxt "@action:button"
-msgid "Sync materials"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA digitális eszközcsere"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:288
-msgctxt "@label"
-msgid "Custom Material"
-msgstr "Egyedi anyag"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF Bináris"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/MaterialManagementModel.py:289
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:336
-msgctxt "@label"
-msgid "Custom"
-msgstr "Egyedi"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF beágyazott JSON"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:390
-msgctxt "@label"
-msgid "Custom profiles"
-msgstr "Egyéni profil"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford háromszög formátum"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:425
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
 msgctxt "@item:inlistbox"
-msgid "All Supported Types ({0})"
-msgstr "Összes támasz típus ({0})"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Tömörített COLLADA digitális eszközcsere"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Machines/Models/QualityManagementModel.py:426
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
 msgctxt "@item:inlistbox"
-msgid "All Files (*)"
-msgstr "Minden fájl (*)"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker formátumcsomag"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:104
-msgctxt "@text:error"
-msgid "Failed to create archive of materials to sync with printers."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:57
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:72
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:94
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:149
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:159
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:111
-#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:165
-msgctxt "@text:error"
-msgid "Failed to load the archive of materials to sync it with printers."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Tárgyasztal szint"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:143
-msgctxt "@text:error"
-msgid "The response from Digital Factory appears to be corrupted."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
+msgctxt "@action"
+msgid "Select upgrades"
+msgstr "Válassz frissítést"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:147
-#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:151
-#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:155
-msgctxt "@text:error"
-msgid "The response from Digital Factory is missing important information."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@action:button"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:218
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory to sync materials with some of the printers."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:155
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/PrinterOutput/UploadMaterialsJob.py:232
-msgctxt "@text:error"
-msgid "Failed to connect to Digital Factory."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:156
+msgctxt "@info:status"
+msgid "Connected via cloud"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:115
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Nem sikerült archívumot létrehozni a felhasználói adatkönyvtárból: {}"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Megpróbált visszaállítani egy Cura biztonsági másolatot anélkül, hogy megfelelő adatok vagy meta adatok lennének."
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:145
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Egy olyan Cura biztonsági mentést próbált visszaállítani, amelyiknek a verziója magasabb a jelenlegitől."
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Backups/Backup.py:158
-msgctxt "@info:backup_failed"
-msgid "The following error occurred while trying to restore a Cura backup:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:261
+msgctxt "@action:button"
+msgid "Monitor print"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Új hely keresése az objektumokhoz"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Hely keresés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:41
-#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:99
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Nincs elég hely az összes objektum építési térfogatához"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Nem találok helyet"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/API/Account.py:190
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Sikertelen bejelentkezés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:85
-msgctxt "@tooltip"
-msgid "Outer Wall"
-msgstr "Külső fal"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:86
-msgctxt "@tooltip"
-msgid "Inner Walls"
-msgstr "Belső falak"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:87
-msgctxt "@tooltip"
-msgid "Skin"
-msgstr "Héj"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:88
-msgctxt "@tooltip"
-msgid "Infill"
-msgstr "Kitöltés"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:263
+msgctxt "@action:tooltip"
+msgid "Track the print in Ultimaker Digital Factory"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:89
-msgctxt "@tooltip"
-msgid "Support Infill"
-msgstr "Támasz kitöltés"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:279
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:90
-msgctxt "@tooltip"
-msgid "Support Interface"
-msgstr "Támasz interface"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:229
+msgctxt "info:status"
+msgid "New printer detected from your Ultimaker account"
+msgid_plural "New printers detected from your Ultimaker account"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:91
-msgctxt "@tooltip"
-msgid "Support"
-msgstr "Támasz"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:242
+#, python-brace-format
+msgctxt "info:status Filled in with printer name and printer model."
+msgid "Adding printer {name} ({model}) from your account"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:92
-msgctxt "@tooltip"
-msgid "Skirt"
-msgstr "Szoknya"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:261
+#, python-brace-format
+msgctxt "info:{0} gets replaced by a number of printers"
+msgid "... and {0} other"
+msgid_plural "... and {0} others"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:93
-msgctxt "@tooltip"
-msgid "Prime Tower"
-msgstr "Elsődleges torony"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:266
+msgctxt "info:status"
+msgid "Printers added from Digital Factory:"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:94
-msgctxt "@tooltip"
-msgid "Travel"
-msgstr "Átmozgás"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:334
+msgctxt "info:status"
+msgid "A cloud connection is not available for a printer"
+msgid_plural "A cloud connection is not available for some printers"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:95
-msgctxt "@tooltip"
-msgid "Retractions"
-msgstr "Visszahúzás"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:343
+msgctxt "info:status"
+msgid "This printer is not linked to the Digital Factory:"
+msgid_plural "These printers are not linked to the Digital Factory:"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/PrintInformation.py:96
-msgctxt "@tooltip"
-msgid "Other"
-msgstr "Egyéb"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:348
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:440
+msgctxt "info:name"
+msgid "Ultimaker Digital Factory"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/ObjectsModel.py:69
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:352
 #, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Csoport #{group_nr}"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:37
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/TextManager.py:63
-msgctxt "@text:window"
-msgid "The release notes could not be opened."
+msgctxt "info:status"
+msgid "To establish a connection, please visit the {website_link}"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:67
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:286
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:356
 msgctxt "@action:button"
-msgid "Skip"
+msgid "Keep printer configurations"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WhatsNewPagesModel.py:72
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:135
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:178
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:450
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:172
-msgctxt "@action:button"
-msgid "Close"
-msgstr "Bezár"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:17
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:61
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:361
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Hozzáad"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:26
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:290
-msgctxt "@action:button"
-msgid "Finish"
+msgid "Remove printers"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/AddPrinterPagesModel.py:33
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:43
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:323
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:451
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:284
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:74
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:136
-msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Elvet"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:57
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UI/WelcomePagesModel.py:277
-msgctxt "@action:button"
-msgid "Next"
-msgstr "Következő"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:100
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "Az nyomtatási szint csökken a \"Nyomtatási sorrend\" beállítása miatt, ez megakadályozza, hogy a mechanika beleütközzön a nyomtatott tárgyba."
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/BuildVolume.py:103
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Építési térfogat"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:135
-msgctxt "@message:text"
-msgid "Could not save material archive to {}:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:442
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "{printer_name} will be removed until the next account sync."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:136
-msgctxt "@message:title"
-msgid "Failed to save material archive"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:443
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/UltimakerCloud/CloudMaterialSync.py:188
-msgctxt "@text"
-msgid "Unknown error."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:444
+#, python-brace-format
+msgctxt "@message {printer_name} is replaced with the name of the printer"
+msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:207
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:140
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:481
 msgctxt "@title:window"
-msgid "File Already Exists"
-msgstr "A fájl már létezik"
+msgid "Remove printers?"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:208
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:141
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:484
 #, python-brace-format
-msgctxt "@label Don't translate the XML tag <filename>!"
-msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
-msgstr "A <filename>{0}</filename> fájl már létezik. Biztosan szeretnéd, hogy felülírjuk?"
+msgctxt "@label"
+msgid ""
+"You are about to remove {0} printer from Cura. This action cannot be undone.\n"
+"Are you sure you want to continue?"
+msgid_plural ""
+"You are about to remove {0} printers from Cura. This action cannot be undone.\n"
+"Are you sure you want to continue?"
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:459
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/ContainerManager.py:462
-msgctxt "@info:status"
-msgid "Invalid file URL:"
-msgstr "Érvénytelen fájl URL:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:489
+msgctxt "@label"
+msgid ""
+"You are about to remove all printers from Cura. This action cannot be undone.\n"
+"Are you sure you want to continue?"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:36
-msgctxt "@info:not supported profile"
-msgid "Not supported"
-msgstr "Nem támogatott"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:25
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"Your printer <b>{printer_name}</b> could be connected via cloud.\n"
+" Manage your print queue and monitor your prints from anywhere connecting your printer to Digital Factory"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/cura_empty_instance_containers.py:55
-msgctxt "@info:No intent profile selected"
-msgid "Default"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:26
+msgctxt "@info:title"
+msgid "Are you ready for cloud printing?"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:857
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "A beállításokat megváltoztattuk, hogy azok megfeleljenek az jelenleg elérhető extrudereknek:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:30
+msgctxt "@action"
+msgid "Get started"
+msgstr "Kezdjük el"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:858
-msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "Beállítások frissítve"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:31
+msgctxt "@action"
+msgid "Learn more"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/MachineManager.py:1480
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "Olyan nyomtatóval próbál csatlakozni, amelyen nem fut az Ultimaker Connect. Kérjük, frissítse a nyomtatón a firmware-t."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extruder(ek) kikapcsolva"
+msgid "Update your printer"
+msgstr "Frissítse a nyomtatót"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
 #, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
-msgstr "A profil exportálása nem sikerült <filename>{0}</filename>: <message>{1}</message>"
+msgctxt "@info:status"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "A Cura olyan anyagprofilt észlel, amelyet még nem telepítettek a(z) {0} csoport gazdanyomtatójára."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:163
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
-msgstr "A profil exportálása nem sikerült <filename>{0}</filename>:Az író beépülő modul hibát jelez."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "Anyagok küldése a nyomtatóra"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:171
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Exported profile to <filename>{0}</filename>"
-msgstr "Profil exportálva ide: <filename>{0}</filename>"
+msgctxt "@info:status"
+msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
+msgstr "Megpróbált csatlakozni a (z) {0} -hez, de a gép nem része a csoportnak.Látogasson el a weboldalra, és konfigurálhatja azt csoporttagnak."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:173
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
-msgid "Export succeeded"
-msgstr "Sikeres export"
-
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:205
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>: {1}"
-msgstr "Sikertelen profil importálás <filename>{0}</filename>: {1} -ból"
+msgid "Not a group host"
+msgstr "Nem csoport"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:209
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
-msgstr "Nem importálható a profil <filename>{0}</filename> -ból, mielőtt hozzá nem adunk egy nyomtatót."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:36
+msgctxt "@action"
+msgid "Configure group"
+msgstr "Csoport konfiguráció"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:224
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "No custom profile to import in file <filename>{0}</filename>"
-msgstr "Nincs egyéni profil a <filename>{0}</filename> fájlban, amelyet importálni lehetne"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+msgctxt "@info:status"
+msgid "Please wait until the current job has been sent."
+msgstr "Várja meg, amíg az aktuális feladat elküldésre kerül."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:228
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "A profil importálása nem sikerült <filename>{0}</filename>:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+msgctxt "@info:title"
+msgid "Print error"
+msgstr "Nyomtatási hiba"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:252
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:262
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename>!"
-msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
-msgstr "Ez a <filename>{0}</filename> profil helytelen adatokat tartamaz, ezért nem importálható."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+msgctxt "@info:text"
+msgid "Could not upload the data to the printer."
+msgstr "Nem sikerült feltölteni az adatokat a nyomtatóra."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:355
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Failed to import profile from <filename>{0}</filename>:"
-msgstr "Nem importálható a profil <filename>{0}</filename>:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+msgctxt "@info:title"
+msgid "Network error"
+msgstr "Hálózati hiba"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:359
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Successfully imported profile {0}."
-msgstr ""
+msgid "Sending Print Job"
+msgstr "Nyomtatási feladat küldése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:366
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
 msgctxt "@info:status"
-msgid "File {0} does not contain any valid profile."
-msgstr "A {0} fájl nem tartalmaz érvényes profilt."
+msgid "Uploading print job to printer."
+msgstr "A nyomtatási feladat feltöltése a nyomtatóra."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:369
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
-msgid "Profile {0} has an unknown file type or is corrupted."
-msgstr "A(z) {0} profil ismeretlen fájltípusú vagy sérült."
+msgid "Print job queue is full. The printer can't accept a new job."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:443
-msgctxt "@label"
-msgid "Custom profile"
-msgstr "Egyedi profil"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+msgctxt "@info:title"
+msgid "Queue Full"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:459
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
-msgid "Profile is missing a quality type."
-msgstr "Hiányzik a profil minőségi típusa."
+msgid "Print job was successfully sent to the printer."
+msgstr "A nyomtatási feladat sikeresen elküldésre került a nyomtatóra."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:463
-msgctxt "@info:status"
-msgid "There is no active printer yet."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+msgctxt "@info:title"
+msgid "Data Sent"
+msgstr "Adatok elküldve"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:469
-msgctxt "@info:status"
-msgid "Unable to add the profile."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print over network"
+msgstr "Hálózati nyomtatás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:483
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+msgctxt "@properties:tooltip"
+msgid "Print over network"
+msgstr "Hálózati nyomtatás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/Settings/CuraContainerRegistry.py:488
-#, python-brace-format
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
-msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
-msgstr ""
+msgid "Connected over the network"
+msgstr "Csatlakozva hálózaton keresztül"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Hálózati csatlakozás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:30
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Tárgyak többszörözése és elhelyezése"
+msgid "tomorrow"
+msgstr "holnap"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:32
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Tárgyak elhelyezése"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "ma"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/MultiplyObjectsJob.py:100
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Tárgy elhelyezése"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB nyomtatás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:216
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Nyomtatás USB-ről"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:277
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Az Ultimaker fiókkiszolgáló elérhetetlen."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Nyomtatás USB-ről"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationService.py:278
-msgctxt "@info:title"
-msgid "Log-in failed"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Csatlakozás USB-n"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationHelpers.py:89
-msgctxt "@message"
-msgid "Could not read response."
-msgstr "Nincs olvasható válasz."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "USB nyomtatás folyamatban van, a Cura bezárása leállítja ezt a nyomtatást. Biztos vagy ebben?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:75
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:135
 msgctxt "@message"
-msgid "The provided state is not correct."
-msgstr ""
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "A nyomtatás még folyamatban van. A Cura nem indíthat új nyomtatást USB-n keresztül, amíg az előző nyomtatás be nem fejeződött."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:80
+#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:136
 msgctxt "@message"
-msgid "Timeout when authenticating with the account server."
-msgstr ""
+msgid "Print in Progress"
+msgstr "Nyomtatás folyamatban"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:97
-msgctxt "@message"
-msgid "Please give the required permissions when authorizing this application."
-msgstr "Kérjük, adja meg a szükséges jogosultságokat az alkalmazás engedélyezéséhez."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D Fájl"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/OAuth2/AuthorizationRequestHandler.py:104
-msgctxt "@message"
-msgid "Something unexpected happened when trying to log in, please try again."
-msgstr "Valami váratlan esemény történt a bejelentkezéskor, próbálkozzon újra."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Röntgen nézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:107
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
 msgctxt "@title:window"
-msgid "Cura can't start"
-msgstr "A Cura nem tud elindulni"
+msgid "Open Project"
+msgstr "Projekt megnyitása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:113
-msgctxt "@label crash message"
-msgid ""
-"<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
-"                    <p>We encountered an unrecoverable error during start up. It was possibly caused by some incorrect configuration files. We suggest to backup and reset your configuration.</p>\n"
-"                    <p>Backups can be found in the configuration folder.</p>\n"
-"                    <p>Please send us this Crash Report to fix the problem.</p>\n"
-"                "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
 msgstr ""
-"<p><b>Hoppá, az Ultimaker Cura olyan dolgokkal találkozott, amelyek hibásnak tűnnek.</p></b>\n"
-"                    <p>Az indítás során helyrehozhatatlan hibát tapasztaltunkEzt valószínűleg néhány helytelen konfigurációs fájl okozta. Javasoljuk, hogy biztonsági másolatból állítsa vissza a konfigurációt.</p>\n"
-"                    <p>A biztonsági mentések a konfigurációs mappában találhatók.</p>\n"
-"                    <p>Kérjük, küldje el nekünk ezt a hibajelentést a probléma megoldásához.</p>\n"
-"                "
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:122
-msgctxt "@action:button"
-msgid "Send crash report to Ultimaker"
-msgstr "Hibajelentés küldése az Ultimaker -nek"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:64
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:125
-msgctxt "@action:button"
-msgid "Show detailed crash report"
-msgstr "Hibajelentés részletei"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:82
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:59
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Összegzés - Cura Project"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:129
-msgctxt "@action:button"
-msgid "Show configuration folder"
-msgstr "Konfigurációs mappa megnyitása"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:108
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Hogyan lehet megoldani a gépet érintő konfliktust?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:140
-msgctxt "@action:button"
-msgid "Backup and Reset Configuration"
-msgstr "Konfiguráció biztonsági mentés és visszaállítás"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:164
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:95
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Nyomtató beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:171
-msgctxt "@title:window"
-msgid "Crash Report"
-msgstr "Összeomlás jelentés"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:175
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:104
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Típus"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:190
-msgctxt "@label crash message"
-msgid ""
-"<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
-"            <p>Please use the \"Send report\" button to post a bug report automatically to our servers</p>\n"
-"        "
-msgstr ""
-"<p><b>Végzetes hiba történt Cura-ban. Kérjük, küld el nekünk az összeomlás jelentését, hogy javítani tudjuk a hibát.</p></b>\n"
-"            <p>Kérjük használd a \"Jelentés küldés\" gombot a hibajelentés postázásához,  így az automatikusan a szerverünkre kerül.</p>\n"
-"        "
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:192
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:119
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Nyomtató csoport"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:198
-msgctxt "@title:groupbox"
-msgid "System information"
-msgstr "Rendszer információ"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:217
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Hogyan lehet megoldani a profilt érintő konfliktust?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:207
-msgctxt "@label unknown version of Cura"
-msgid "Unknown"
-msgstr "Ismeretlen"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:220
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profil beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:228
-msgctxt "@label Cura version number"
-msgid "Cura version"
-msgstr "Cura verzió"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:250
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:375
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:119
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:244
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Név"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:229
-msgctxt "@label"
-msgid "Cura language"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:268
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:261
+msgctxt "@action:label"
+msgid "Intent"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:230
-msgctxt "@label"
-msgid "OS language"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:286
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:228
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Nincs a profilban"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:231
-msgctxt "@label Type of platform"
-msgid "Platform"
-msgstr "Felület"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:233
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 felülírás"
+msgstr[1] "%1 felülírás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:232
-msgctxt "@label"
-msgid "Qt version"
-msgstr "Qt verzió"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:305
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Származék"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:233
-msgctxt "@label"
-msgid "PyQt version"
-msgstr "PyQt verzió"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:311
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 felülírás"
+msgstr[1] "%1, %2 felülírás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:234
-msgctxt "@label OpenGL version"
-msgid "OpenGL"
-msgstr "OpenGL"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:333
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Hogyan lehet megoldani az alapanyaggal kapcsolatos konfliktust?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:264
-msgctxt "@label"
-msgid "Not yet initialized<br/>"
-msgstr "Még nincs inicializálva<br/>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:360
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Alapanyag beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:267
-#, python-brace-format
-msgctxt "@label OpenGL version"
-msgid "<li>OpenGL Version: {version}</li>"
-msgstr "<li>OpenGL Verzió: {version}</li>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:396
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Beállítások láthatósága"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:268
-#, python-brace-format
-msgctxt "@label OpenGL vendor"
-msgid "<li>OpenGL Vendor: {vendor}</li>"
-msgstr "<li>OpenGL terjesztő: {vendor}</li>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:405
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Mód"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:269
-#, python-brace-format
-msgctxt "@label OpenGL renderer"
-msgid "<li>OpenGL Renderer: {renderer}</li>"
-msgstr "<li>OpenGL Renderer: {renderer}</li>"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:421
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Látható beállítások:"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:303
-msgctxt "@title:groupbox"
-msgid "Error traceback"
-msgstr "Hibakövetés"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:426
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 %2 -ből"
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:389
-msgctxt "@title:groupbox"
-msgid "Logs"
-msgstr "Naplók"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:447
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "A projekt betöltésekor minden modell törlődik a tárgyasztalról."
 
-#: /home/remco/dev/code/ulti/trans/Cura/cura/CrashHandler.py:417
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:514
 msgctxt "@action:button"
-msgid "Send report"
-msgstr "Jelentés küldés"
+msgid "Open"
+msgstr "Megnyitás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:520
+msgctxt "@action:button"
+msgid "Open project anyway"
 msgstr ""
-"Győződj meg, hogy a nyomtató csatlakozása rendben van:\n"
-"- Ellenőrizd, hogy a nyomtató be van-e kapcsolva.\n"
-"- Ellenőrizd, hogy a nyomtató csatlakozik a hálózathoz\n"
-"- Ellenőrizd, hogy fel vagy-e jelentkezve a felhőbe."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:113
-msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Csatlakoztasd a nyomtatót a hálózathoz."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:529
+msgctxt "@action:button"
+msgid "Install missing material"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:146
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Nézd meg az online felhasználói kézikönyvet"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
+msgctxt "@button"
+msgid "Want more?"
+msgstr "Többet szeretnél?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MonitorStage/MonitorMain.qml:163
-msgctxt "@info"
-msgid "In order to monitor your print from Cura, please connect the printer."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
+msgctxt "@button"
+msgid "Backup Now"
+msgstr "Biztonsági mentés most"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
-msgctxt "@title:window"
-msgid "Select Settings to Customize for this model"
-msgstr "A modellek egyéni beállításainak kiválasztása"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Automatikus biztonsági mentés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:100
-msgctxt "@label:textbox"
-msgid "Filter..."
-msgstr "Szűrés..."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Automatikusan létrehoz egy biztonsági mentést minden egyes nap, mikor a Cura indítva van."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
-msgctxt "@label:checkbox"
-msgid "Show all"
-msgstr "Mindent mutat"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+msgctxt "@button"
+msgid "Restore"
+msgstr "Visszaállítás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
-msgctxt "@label"
-msgid "Mesh Type"
-msgstr "Háló típus"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Biztonsági mentés törlés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
-msgctxt "@label"
-msgid "Normal model"
-msgstr "Normál mód"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Biztosan szeretnéd törölni a biztonsági mentést? Ez nem vonható vissza."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
-msgctxt "@label"
-msgid "Print as support"
-msgstr "Támaszként nyomtassa"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Helyreállítás biztonsági mentésből"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
-msgctxt "@label"
-msgid "Modify settings for overlaps"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "A biztonsági mentés helyreállítás előtt a Cura -t újra kell indítani.Bezárjuk most a Cura-t?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
-msgctxt "@label"
-msgid "Don't support overlaps"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura verzió"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
-msgctxt "@item:inlistbox"
-msgid "Infill mesh only"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Gépek"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
-msgctxt "@item:inlistbox"
-msgid "Cutting mesh"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Alapanyagok"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profilok"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Beépülők"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura biztonsági mentések"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Biztonsági mentéseim"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:36
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "Nincs egyetlen biztonsági mentésed sem. Használd a 'Biztonsági mentés' gombot, hogy létrehozz egyet."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:55
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Az előnézeti szakaszban a látható biztonsági mentések száma 5 lehet.Ha szeretné látni a régebbieket, távolítson el egyet a láthatóak közül."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "A Cura beállítások biztonsági mentése és szinkronizálása."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:49
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:164
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:212
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Bejelentkezés"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:216
+msgctxt "@option"
+msgid "Save Cura project and print file"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
-msgctxt "@action:button"
-msgid "Select settings"
-msgstr "Beállítások kiválasztása"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/DigitalLibrary/resources/qml/SaveProjectFilesPage.qml:217
+msgctxt "@option"
+msgid "Save Cura project"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Firmware frissítés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:37
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "A firmware egy szoftver, ami közvetlenül a nyomtatón fut. Ez vezérli a léptető motorokat, szabályozza a hőmérsékleteket, és az egész nyomtató működését."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:43
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "A firmware a nyomtató része, így a használatba vételkor már a gépen található.Azonban készülnek belőle újabb verziók, amik esetleges hibákat szüntetnek meg, illetve egyéb új funkciókat biztosíthatnak."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:55
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Automatikus firmware frissítés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:66
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Egyedi firmware feltöltése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:79
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "A firmware feltöltés nem lehetséges, mert nincs a nyomtatóval kapcsolat."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:86
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "A firmware feltöltés nem lehetséges, mert ugyan a nyomtató kapcsolódik, de az nem támogatja a firmware frissítést."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:93
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Egyedi firmware kiválasztása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:114
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:113
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Firmware frissítés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:138
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:137
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "A firmware frissítése."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:140
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:139
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "Firmware frissítés kész."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:142
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:141
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "A firmware frissítés meghiúsult ismeretlen hiba miatt."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:144
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "A firmware frissítés meghiúsult kommunikációs hiba miatt."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:146
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "A firmware frissítés meghiúsult input/output hiba miatt."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:148
+#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "A firmware frissítés meghiúsult, mert nem található a firmware."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Megszakítva"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Befejezve"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Előkészítés..."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Megszakítás..."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Failed"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Várakozás..."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Várakozás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Folytatás..."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Beavatkozás szükséges"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Befejezve %1 a %2 -ből"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
-msgctxt "@label link to Connect and Cloud interfaces"
-msgid "Manage printer"
-msgstr "Nyomtató kezelés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
-msgctxt "@label"
-msgid "Glass"
-msgstr "Üveg"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "A távoli nyomtatásisor kezeléshez kérjük frissítse a firmware-t."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
-msgctxt "@info"
-msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
-msgctxt "@label:status"
-msgid "Loading..."
-msgstr "Betöltés..."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
-msgctxt "@label:status"
-msgid "Unavailable"
-msgstr "Elérhetetlen"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
-msgctxt "@label:status"
-msgid "Unreachable"
-msgstr "Elérhetetlen"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
-msgctxt "@label:status"
-msgid "Idle"
-msgstr "Készenlét"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
-msgctxt "@label:status"
-msgid "Printing"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
-msgctxt "@label"
-msgid "Untitled"
-msgstr "Felirat nélküli"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
-msgctxt "@label"
-msgid "Anonymous"
-msgstr "Névtelen"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
-msgctxt "@label:status"
-msgid "Requires configuration changes"
-msgstr "A konfiguráció változtatásokat igényel"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
-msgctxt "@action:button"
-msgid "Details"
-msgstr "Részletek"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Konfiguráció változások"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
-msgctxt "@action:button"
-msgid "Override"
-msgstr "Felülírás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatás szükséges:"
-msgstr[1] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatások szükségesek:"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "A %1 nyomtató hozzá van rendelve a feladathoz, azonban az ismeretlen anyagot tartalmaz."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Változtasd meg az %1 anyagot %2 -ről %3 -ra."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Töltsd be %3 -at %1 anyagként. (Ez nem felülbírálható)."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Cseréld a nyomtató magot %1 -ről %2 -re, %3 -hoz."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Változtasd meg a tálcát %1 -re (Ez nem felülbírálható)."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "A felülbírálás a megadott beállításokat fogja használni a meglévő nyomtató konfigurációval, azonban ez eredménytelen nyomtatáshoz vezethet."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
-msgctxt "@label"
-msgid "Aluminum"
-msgstr "Alumínium"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Nyomtatás hálózaton"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Nyomtatás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
-msgctxt "@label"
-msgid "Printer selection"
-msgstr "Nyomtató kiválasztás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
-msgctxt "@title:window"
-msgid "Connect to Networked Printer"
-msgstr "Csatlakozás hálózati nyomtatóhoz"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
-msgctxt "@label"
-msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
-msgstr "Ha hálózaton keresztül szeretnél közvetlenül nyomtatni, akkor győződj meg arról, hogy a nyomtató csatlakozik vezetékes, vagy vezeték nélküli hálózathoz. Ha nincs elérhető hálózat, akkor közvetlenül USB kapcsolaton keresztül is tudsz nyomtatni."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
-msgctxt "@label"
-msgid "Select your printer from the list below:"
-msgstr "Válaszd ki a nyomtatódat az alábbi listából:"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
-msgctxt "@action:button"
-msgid "Edit"
-msgstr "Szerkeszt"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:141
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:320
-msgctxt "@action:button"
-msgid "Remove"
-msgstr "Eltávolít"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
-msgctxt "@action:button"
-msgid "Refresh"
-msgstr "Frissít"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
-msgctxt "@label"
-msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
-msgstr "Ha a nyomtatód nincs a listában, olvasd el a <a href='%1'>hálózati nyomtatás hibaelhárítási útmutatót</a>"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
-msgctxt "@label"
-msgid "Type"
-msgstr "Típus"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
-msgctxt "@label"
-msgid "Firmware version"
-msgstr "Frimware verzió"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
-msgctxt "@label"
-msgid "Address"
-msgstr "Cím"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
-msgctxt "@label"
-msgid "This printer is not set up to host a group of printers."
-msgstr "Ez a nyomtató nem úgy van beállítva, hogy nyomtatócsoportot üzemeltessen."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
-msgctxt "@label"
-msgid "This printer is the host for a group of %1 printers."
-msgstr "Ez a nyomtató gazdagépe a %1 nyomtatócsoportnak."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
-msgctxt "@label"
-msgid "The printer at this address has not yet responded."
-msgstr "A címen található nyomtató még nem válaszolt."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
-msgctxt "@action:button"
-msgid "Connect"
-msgstr "Csatlakozás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
-msgctxt "@title:window"
-msgid "Invalid IP address"
-msgstr "Hibás IP cím"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
-msgctxt "@text"
-msgid "Please enter a valid IP address."
-msgstr "Kérlek adj meg egy érvényes IP címet."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
-msgctxt "@title:window"
-msgid "Printer Address"
-msgstr "Nyomtató cím"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
-msgctxt "@label"
-msgid "Enter the IP address of your printer on the network."
-msgstr "Írd be a nyomtató hálózati IP címét."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
-msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Elérhetetlen nyomtató"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
-msgctxt "@label"
-msgid "First available"
-msgstr "Az első elérhető"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
-msgctxt "@label"
-msgid "Move to top"
-msgstr "Lépj a tetjére"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
-msgctxt "@label"
-msgid "Delete"
-msgstr "Törlés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:284
-msgctxt "@label"
-msgid "Resume"
-msgstr "Folytat"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
-msgctxt "@label"
-msgid "Pausing..."
-msgstr "Várakozás..."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
-msgctxt "@label"
-msgid "Resuming..."
-msgstr "Folytatás..."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:279
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:288
-msgctxt "@label"
-msgid "Pause"
-msgstr "Várakozás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
-msgctxt "@label"
-msgid "Aborting..."
-msgstr "Megszakítás..."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
-msgctxt "@label"
-msgid "Abort"
-msgstr "Megszakít"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to move %1 to the top of the queue?"
-msgstr "Biztos, hogy a %1 a nyomtatási sor elejére akarod mozgatni?"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
-msgctxt "@window:title"
-msgid "Move print job to top"
-msgstr "Tedd a nyomtatási sor elejére"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to delete %1?"
-msgstr "Biztos, hogy törölni szeretnéd %1?"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
-msgctxt "@window:title"
-msgid "Delete print job"
-msgstr "Nyomtatási feladat törlés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
-msgctxt "@label %1 is the name of a print job."
-msgid "Are you sure you want to abort %1?"
-msgstr "Biztosan meg akarod szakítani %1?"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:326
-msgctxt "@window:title"
-msgid "Abort print"
-msgstr "Nyomtatás megszakítás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
-msgctxt "@label"
-msgid "Queued"
-msgstr "Nyomtatási Sor"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Kezelés a böngészőben"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
-msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Nincs a sorban nyomtatási feladat. Szeletelj és adj hozzá egy feladatot."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
-msgctxt "@label"
-msgid "Print jobs"
-msgstr "Nyomtatások"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
-msgctxt "@label"
-msgid "Total print time"
-msgstr "Teljes nyomtatási idő"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
-msgctxt "@label"
-msgid "Waiting for"
-msgstr "Várakozom"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:19
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:48
-msgctxt "@label"
-msgid "Color scheme"
-msgstr "Szín séma"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:105
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Alapanyag szín"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Vonal típus"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
-msgctxt "@label:listbox"
-msgid "Layer Thickness"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
-msgctxt "@label:listbox"
-msgid "Line Width"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
-msgctxt "@label:listbox"
-msgid "Flow"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:165
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Kompatibilis mód"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:232
-msgctxt "@label"
-msgid "Travels"
-msgstr "Átmozgás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:238
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Segítők"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:244
-msgctxt "@label"
-msgid "Shell"
-msgstr "Héj"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:250
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
-msgctxt "@label"
-msgid "Infill"
-msgstr "Kitöltés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:258
-msgctxt "@label"
-msgid "Starts"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:307
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Csak a felső rétegek megjelenítése"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:316
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "Mutasson 5 felső réteget részletesen"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:329
-msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Felső / Alsó"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:333
-msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Belső fal"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:400
-msgctxt "@label"
-msgid "min"
-msgstr "min"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:465
-msgctxt "@label"
-msgid "max"
-msgstr "max"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:14
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:14
 msgctxt "@title:window"
 msgid "Convert Image"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:33
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
 msgctxt "@action:label"
 msgid "Height (mm)"
 msgstr "Magasság (mm)"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:56
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
 msgctxt "@info:tooltip"
 msgid "The maximum distance of each pixel from \"Base.\""
 msgstr "Az egyes pixelek legnagyobb távolsága \"Base.\""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:66
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:66
 msgctxt "@action:label"
 msgid "Base (mm)"
 msgstr "Alap (mm)"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:90
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:90
 msgctxt "@info:tooltip"
 msgid "The base height from the build plate in millimeters."
 msgstr "Az alap magassága a tárgyasztaltól mm -ben."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:100
 msgctxt "@action:label"
 msgid "Width (mm)"
 msgstr "Szélesség (mm)"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:124
 msgctxt "@info:tooltip"
 msgid "The width in millimeters on the build plate"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:134
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:134
 msgctxt "@action:label"
 msgid "Depth (mm)"
 msgstr "Mélység (mm)"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:158
 msgctxt "@info:tooltip"
 msgid "The depth in millimeters on the build plate"
 msgstr "A mélység mm-ben a tárgyasztalon"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:187
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:187
 msgctxt "@item:inlistbox"
 msgid "Darker is higher"
 msgstr "A sötétebb a magasabb"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:188
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:188
 msgctxt "@item:inlistbox"
 msgid "Lighter is higher"
 msgstr "A világosabb a magasabb"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
 msgctxt "@info:tooltip"
 msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
 msgstr "A litofánok esetében a sötét képpontoknak a vastagabb helyek felelnek meg.Ez azért van így, mert minél vastagabb a hely, annál kevesebb fényt enged át.A magassági térképeknél a világosabb képpontok magasabb szintnek felelnek meg, tehát a generált 3D modellnél ezeket figyelembe kell venni.Ez azt is jelenti, hogy általában a generált modell a tényleges kép negatívja kell, hogy legyen."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:205
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:205
 msgctxt "@action:label"
 msgid "Color Model"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:224
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:224
 msgctxt "@item:inlistbox"
 msgid "Linear"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:225
 msgctxt "@item:inlistbox"
 msgid "Translucency"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:232
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:232
 msgctxt "@info:tooltip"
 msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:242
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:242
 msgctxt "@action:label"
 msgid "1mm Transmittance (%)"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:263
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:263
 msgctxt "@info:tooltip"
 msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:274
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:274
 msgctxt "@action:label"
 msgid "Smoothing"
 msgstr "Simítás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:298
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:298
 msgctxt "@info:tooltip"
 msgid "The amount of smoothing to apply to the image."
 msgstr "A kép simításának mértéke."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/ImageReader/ConfigUI.qml:329
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:80
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:140
+#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:329
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:136
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:80
 msgctxt "@action:button"
 msgid "OK"
 msgstr "OK"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Projekt megnyitása"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:55
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:56
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:74
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:52
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Összegzés - Cura Project"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Nyomtató"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:100
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Hogyan lehet megoldani a gépet érintő konfliktust?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Fűvóka beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:156
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:88
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Nyomtató beállítások"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:74
+msgctxt "@label"
+msgid "Nozzle size"
+msgstr "Fúvóka méret"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:97
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Típus"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:78
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:92
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:108
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:72
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:87
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:102
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "mm"
+msgstr "mm"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:184
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Nyomtató csoport"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:88
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Nyomtatószál átmérő"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:209
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Hogyan lehet megoldani a profilt érintő konfliktust?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:104
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Fúvóka X eltolás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:231
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:213
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profil beállítások"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:119
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Fúvóka Y eltolás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:367
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:112
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:237
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Név"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:134
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Hűtőventilátorok száma"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:260
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:254
-msgctxt "@action:label"
-msgid "Intent"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Extruder G-kód kezdés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:278
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:221
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Nincs a profilban"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Extruder G-kód zárás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:284
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 felülírás"
-msgstr[1] "%1 felülírás"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Nyomtató beállítás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:297
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Származék"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:68
+msgctxt "@label"
+msgid "X (Width)"
+msgstr "X (Szélesség)"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:303
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 felülírás"
-msgstr[1] "%1, %2 felülírás"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:83
+msgctxt "@label"
+msgid "Y (Depth)"
+msgstr "Y (Mélység)"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Hogyan lehet megoldani az alapanyaggal kapcsolatos konfliktust?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:98
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Magasság)"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:352
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Alapanyag beállítások"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:112
+msgctxt "@label"
+msgid "Build plate shape"
+msgstr "Tárgyasztal alakja"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:388
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Beállítások láthatósága"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:125
+msgctxt "@label"
+msgid "Origin at center"
+msgstr "Origó középen"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:397
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Mód"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:137
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Fűtött asztal"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:413
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Látható beállítások:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:149
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Fűtött nyomtatási tér"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:418
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 %2 -ből"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:161
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "G-kód illesztés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:439
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "A projekt betöltésekor minden modell törlődik a tárgyasztalról."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:185
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Nyomtatófej beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/3MFReader/WorkspaceDialog.qml:456
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Megnyitás"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:197
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Többet szeretnél?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:217
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Biztonsági mentés most"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:237
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Automatikus biztonsági mentés"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:257
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Automatikusan létrehoz egy biztonsági mentést minden egyes nap, mikor a Cura indítva van."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:275
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Szán magasság"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura verzió"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:289
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Extruderek száma"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Gépek"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:341
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Alapanyagok"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:389
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "G-kód kezdés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profilok"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:400
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "G-kód zárás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Beépülők"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:15
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:64
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24
 msgctxt "@button"
-msgid "Restore"
-msgstr "Visszaállítás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:93
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Biztonsági mentés törlés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:94
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Biztosan szeretnéd törölni a biztonsági mentést? Ez nem vonható vissza."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:102
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Helyreállítás biztonsági mentésből"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:103
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "A biztonsági mentés helyreállítás előtt a Cura -t újra kell indítani.Bezárjuk most a Cura-t?"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "A Cura beállítások biztonsági mentése és szinkronizálása."
+msgid "Dismiss"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:47
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:49
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:163
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:225
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:24
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:118
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:76
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:175
 msgctxt "@button"
-msgid "Sign in"
-msgstr "Bejelentkezés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Biztonsági mentéseim"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "Nincs egyetlen biztonsági mentésed sem. Használd a 'Biztonsági mentés' gombot, hogy létrehozz egyet."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Az előnézeti szakaszban a látható biztonsági mentések száma 5 lehet.Ha szeretné látni a régebbieket, távolítson el egyet a láthatóak közül."
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura biztonsági mentések"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
-msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "További információ a névtelen adatgyűjtésről"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javítása érdekében. Az alábbiakban található egy példa az összes megosztott adatra:"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Nem szeretnék részt venni az adatgyűjtésben"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Anonim adatok küldésének engedélyezése"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
-msgctxt "@title:window"
-msgid "Post Processing Plugin"
-msgstr "Utó művelet beépülő"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
-msgctxt "@label"
-msgid "Post Processing Scripts"
-msgstr "Utó művelet szkript"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:221
-msgctxt "@action"
-msgid "Add a script"
-msgstr "Adjon hozzá egy szkriptet"
+msgid "Next"
+msgstr "Következő"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:257
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:52
 msgctxt "@label"
-msgid "Settings"
-msgstr "Beállítások"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:466
-msgctxt "@info:tooltip"
-msgid "Change active post-processing scripts."
+msgid "The following packages will be added:"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:470
-msgctxt "@info:tooltip"
-msgid "The following script is active:"
-msgid_plural "The following scripts are active:"
-msgstr[0] ""
-msgstr[1] ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Kérjük, válassza ki az Ultimaker Original eredeti frissítéseit"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/CompatibilityDialog.qml:94
 msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Fűthető tárgyasztal (eredeti vagy utólag épített)"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/InstallMissingPackagesDialog.qml:15
 msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Tálca szintezés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Azért, hogy nyomtattandó testek megfelelően letapadjanak,  lehetőség van beállítani a nyomtatótálcát. Ha rákattint a 'Mozgás a következő pozícióba' gombra, a fej átmozgatható a különböző beállítási helyzetekbe."
+msgid "Install missing Materials"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Minden helyzetben helyezzen be egy darab papírt (A4) a fúvóka alá, és állítsa be a fej magasságát.A nyomtató tálca magassága akkor megfelelő, ha a papírt kissé megfogja a fúvóka vége."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:15
+msgctxt "@button"
+msgid "Plugin license agreement"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Tálca szintezés indítása"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:47
+msgctxt "@text"
+msgid "Please read and agree with the plugin licence."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Mozgás a következő pozícióba"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:70
+msgctxt "@button"
+msgid "Accept"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
-msgctxt "@info"
-msgid "Ultimaker Verified Plug-in"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+msgctxt "@header"
+msgid "Manage packages"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
-msgctxt "@info"
-msgid "Ultimaker Certified Material"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
+msgctxt "@text"
+msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
-msgctxt "@info"
-msgid "Ultimaker Verified Package"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
+msgctxt "@info:tooltip"
+msgid "Manage packages"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:84
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:87
 msgctxt "@title"
 msgid "Loading..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:148
 msgctxt "@button"
 msgid "Plugins"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:151
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:156
 msgctxt "@button"
 msgid "Materials"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:188
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:193
 msgctxt "@info"
 msgid "Search in the browser"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:266
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:271
 msgctxt "@button"
 msgid "In order to use the package you will need to restart Cura"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:274
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Marketplace.qml:279
 msgctxt "@info:button, %1 is the application name"
 msgid "Quit %1"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:165
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/MissingPackages.qml:8
+msgctxt "@header"
+msgid "Install Materials"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
+msgctxt "@text"
+msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/MultipleLicenseDialog.qml:35
 msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/OnboardBanner.qml:101
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:207
+msgctxt "@button:label"
+msgid "Learn More"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:172
+msgctxt "@label Is followed by the name of an author"
 msgid "By"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:226
 msgctxt "@button"
 msgid "Enable"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:199
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:226
 msgctxt "@button"
 msgid "Disable"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:217
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:244
 msgctxt "@button"
 msgid "Downgrading..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:218
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:245
 msgctxt "@button"
 msgid "Downgrade"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:222
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:249
 msgctxt "@button"
 msgid "Installing..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:223
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:250
 msgctxt "@button"
 msgid "Install"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:227
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:254
 msgctxt "@button"
 msgid "Uninstall"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:269
 msgctxt "@button"
 msgid "Updating..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:242
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageCardHeader.qml:269
 msgctxt "@button"
 msgid "Update"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
 msgctxt "@header"
-msgid "Install Plugins"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
-msgctxt "@text"
-msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
+msgid "Package details"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagePackagesButton.qml:32
-msgctxt "@info:tooltip"
-msgid "Manage packages"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
+msgctxt "@button:tooltip"
+msgid "Back"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:85
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:81
 msgctxt "@header"
 msgid "Description"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:117
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:110
 msgctxt "@header"
 msgid "Compatible printers"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:143
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:134
 msgctxt "@info"
 msgid "No compatibility information"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:162
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:152
 msgctxt "@header"
 msgid "Compatible support materials"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:188
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:176
 msgctxt "@info No materials"
 msgid "None"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:206
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:193
 msgctxt "@header"
 msgid "Compatible with Material Station"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:202
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:228
 msgctxt "@info"
 msgid "Yes"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:216
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:244
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:202
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:228
 msgctxt "@info"
 msgid "No"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:234
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:219
 msgctxt "@header"
 msgid "Optimized for Air Manager"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:243
 msgctxt "@button"
 msgid "Visit plug-in website"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:260
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:243
 msgctxt "@button"
 msgid "Website"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:269
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:252
 msgctxt "@button"
 msgid "Buy spool"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:278
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:261
 msgctxt "@button"
 msgid "Safety datasheet"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:287
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/PackagePage.qml:270
 msgctxt "@button"
 msgid "Technical datasheet"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:15
-msgctxt "@header"
-msgid "Package details"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/PackageDetails.qml:40
-msgctxt "@button:tooltip"
-msgid "Back"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:16
-msgctxt "@button"
-msgid "Plugin license agreement"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:48
-msgctxt "@text"
-msgid "Please read and agree with the plugin licence."
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:74
-msgctxt "@button"
-msgid "Accept"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/LicenseDialog.qml:83
-msgctxt "@button"
-msgid "Decline"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:151
 msgctxt "@button"
 msgid "Failed to load packages:"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:164
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:151
 msgctxt "@button"
 msgid "Retry?"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:180
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:167
 msgctxt "@button"
 msgid "Loading"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:183
 msgctxt "@message"
 msgid "No more results to load"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:196
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:183
 msgctxt "@message"
 msgid "No results found with current filter"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Packages.qml:239
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Packages.qml:226
 msgctxt "@button"
 msgid "Load more"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:11
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Plugins.qml:8
 msgctxt "@header"
-msgid "Manage packages"
+msgid "Install Plugins"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/ManagedPackages.qml:15
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/Plugins.qml:12
 msgctxt "@text"
-msgid "Manage your Ultimaker Cura plugins and material profiles here. Make sure to keep your plugins up to date and backup your setup regularly."
+msgid "Streamline your workflow and customize your Ultimaker Cura experience with plugins contributed by our amazing community of users."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:8
-msgctxt "@header"
-msgid "Install Materials"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:21
+msgctxt "@info"
+msgid "Ultimaker Verified Plug-in"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/Marketplace/resources/qml/Materials.qml:12
-msgctxt "@text"
-msgid "Select and install material profiles optimised for your Ultimaker 3D printers."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:22
+msgctxt "@info"
+msgid "Ultimaker Certified Material"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
-msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Nyomtató"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/Marketplace/resources/qml/VerifiedIcon.qml:23
+msgctxt "@info"
+msgid "Ultimaker Verified Package"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Fűvóka beállítások"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Győződj meg, hogy a nyomtató csatlakozása rendben van:\n"
+"- Ellenőrizd, hogy a nyomtató be van-e kapcsolva.\n"
+"- Ellenőrizd, hogy a nyomtató csatlakozik a hálózathoz\n"
+"- Ellenőrizd, hogy fel vagy-e jelentkezve a felhőbe."
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Fúvóka méret"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:113
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Csatlakoztasd a nyomtatót a hálózathoz."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:147
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Nézd meg az online felhasználói kézikönyvet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
+#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:163
+msgctxt "@info"
+msgid "In order to monitor your print from Cura, please connect the printer."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:41
 msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+msgid "Mesh Type"
+msgstr "Háló típus"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:81
 msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Nyomtatószál átmérő"
+msgid "Normal model"
+msgstr "Normál mód"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:96
 msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Fúvóka X eltolás"
+msgid "Print as support"
+msgstr "Támaszként nyomtassa"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:111
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Fúvóka Y eltolás"
+msgid "Modify settings for overlaps"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:126
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Hűtőventilátorok száma"
+msgid "Don't support overlaps"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Extruder G-kód kezdés"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:159
+msgctxt "@item:inlistbox"
+msgid "Infill mesh only"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Extruder G-kód zárás"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:160
+msgctxt "@item:inlistbox"
+msgid "Cutting mesh"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Nyomtató beállítás"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:385
+msgctxt "@action:button"
+msgid "Select settings"
+msgstr "Beállítások kiválasztása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
-msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Szélesség)"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:17
+msgctxt "@title:window"
+msgid "Select Settings to Customize for this model"
+msgstr "A modellek egyéni beállításainak kiválasztása"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:61
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:102
+msgctxt "@label:textbox"
+msgid "Filter..."
+msgstr "Szűrés..."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:75
+msgctxt "@label:checkbox"
+msgid "Show all"
+msgstr "Mindent mutat"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:17
+msgctxt "@title:window"
+msgid "Post Processing Plugin"
+msgstr "Utó művelet beépülő"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Mélység)"
+msgid "Post Processing Scripts"
+msgstr "Utó művelet szkript"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:215
+msgctxt "@action"
+msgid "Add a script"
+msgstr "Adjon hozzá egy szkriptet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:251
 msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Magasság)"
+msgid "Settings"
+msgstr "Beállítások"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:459
+msgctxt "@info:tooltip"
+msgid "Change active post-processing scripts."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
+#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:463
+msgctxt "@info:tooltip"
+msgid "The following script is active:"
+msgid_plural "The following scripts are active:"
+msgstr[0] ""
+msgstr[1] ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:18
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:47
 msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Tárgyasztal alakja"
+msgid "Color scheme"
+msgstr "Szín séma"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:104
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Alapanyag szín"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:108
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Vonal típus"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:112
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:116
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:120
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:124
+msgctxt "@label:listbox"
+msgid "Flow"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:164
 msgctxt "@label"
-msgid "Origin at center"
-msgstr "Origó középen"
+msgid "Compatibility Mode"
+msgstr "Kompatibilis mód"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:231
 msgctxt "@label"
-msgid "Heated bed"
-msgstr "Fűtött asztal"
+msgid "Travels"
+msgstr "Átmozgás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Fűtött nyomtatási tér"
+msgid "Helpers"
+msgstr "Segítők"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "G-code flavor"
-msgstr "G-kód illesztés"
+msgid "Shell"
+msgstr "Héj"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Nyomtatófej beállítások"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:64
+msgctxt "@label"
+msgid "Infill"
+msgstr "Kitöltés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:257
 msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+msgid "Starts"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:304
 msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+msgid "Only Show Top Layers"
+msgstr "Csak a felső rétegek megjelenítése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:313
 msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "Mutasson 5 felső réteget részletesen"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
 msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+msgid "Top / Bottom"
+msgstr "Felső / Alsó"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:330
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Szán magasság"
+msgid "Inner Wall"
+msgstr "Belső fal"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:397
 msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Extruderek száma"
+msgid "min"
+msgstr "min"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:462
 msgctxt "@label"
-msgid "Apply Extruder offsets to GCode"
-msgstr ""
+msgid "max"
+msgstr "max"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "G-kód kezdés"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:16
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "További információ a névtelen adatgyűjtésről"
 
-#: /home/remco/dev/code/ulti/trans/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "G-kód zárás"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:73
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javítása érdekében. Az alábbiakban található egy példa az összes megosztott adatra:"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
-msgctxt "@label:button"
-msgid "My printers"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:107
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Nem szeretnék részt venni az adatgyűjtésben"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
-msgctxt "@tooltip:button"
-msgid "Monitor printers in Ultimaker Digital Factory."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:116
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Anonim adatok küldésének engedélyezése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
-msgctxt "@tooltip:button"
-msgid "Create print projects in Digital Library."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Tálca szintezés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
-msgctxt "@label:button"
-msgid "Print jobs"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:42
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Azért, hogy nyomtattandó testek megfelelően letapadjanak,  lehetőség van beállítani a nyomtatótálcát. Ha rákattint a 'Mozgás a következő pozícióba' gombra, a fej átmozgatható a különböző beállítási helyzetekbe."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
-msgctxt "@tooltip:button"
-msgid "Monitor print jobs and reprint from your print history."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:52
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Minden helyzetben helyezzen be egy darab papírt (A4) a fúvóka alá, és állítsa be a fej magasságát.A nyomtató tálca magassága akkor megfelelő, ha a papírt kissé megfogja a fúvóka vége."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
-msgctxt "@tooltip:button"
-msgid "Extend Ultimaker Cura with plugins and material profiles."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:67
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Tálca szintezés indítása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
-msgctxt "@tooltip:button"
-msgid "Become a 3D printing expert with Ultimaker e-learning."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:79
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Mozgás a következő pozícióba"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
-msgctxt "@label:button"
-msgid "Ultimaker support"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
+msgctxt "@label"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Kérjük, válassza ki az Ultimaker Original eredeti frissítéseit"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
-msgctxt "@tooltip:button"
-msgid "Learn how to get started with Ultimaker Cura."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:39
+msgctxt "@label"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Fűthető tárgyasztal (eredeti vagy utólag épített)"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
-msgctxt "@label:button"
-msgid "Ask a question"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:44
+msgctxt "@title:window"
+msgid "Connect to Networked Printer"
+msgstr "Csatlakozás hálózati nyomtatóhoz"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
-msgctxt "@tooltip:button"
-msgid "Consult the Ultimaker Community."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
+msgctxt "@label"
+msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
+msgstr "Ha hálózaton keresztül szeretnél közvetlenül nyomtatni, akkor győződj meg arról, hogy a nyomtató csatlakozik vezetékes, vagy vezeték nélküli hálózathoz. Ha nincs elérhető hálózat, akkor közvetlenül USB kapcsolaton keresztül is tudsz nyomtatni."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
-msgctxt "@label:button"
-msgid "Report a bug"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:51
+msgctxt "@label"
+msgid "Select your printer from the list below:"
+msgstr "Válaszd ki a nyomtatódat az alábbi listából:"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
-msgctxt "@tooltip:button"
-msgid "Let developers know that something is going wrong."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:71
+msgctxt "@action:button"
+msgid "Edit"
+msgstr "Szerkeszt"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
-msgctxt "@tooltip:button"
-msgid "Visit the Ultimaker website."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:82
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:140
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:186
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:321
+msgctxt "@action:button"
+msgid "Remove"
+msgstr "Eltávolít"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Kiválasztott modell nyomtatása %1"
-msgstr[1] "Kiválasztott modellek nyomtatása %1"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:90
+msgctxt "@action:button"
+msgid "Refresh"
+msgstr "Frissít"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "&Beállítások"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:161
+msgctxt "@label"
+msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
+msgstr "Ha a nyomtatód nincs a listában, olvasd el a <a href='%1'>hálózati nyomtatás hibaelhárítási útmutatót</a>"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Új projekt"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:186
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:247
+msgctxt "@label"
+msgid "Type"
+msgstr "Típus"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Biztos benne, hogy új projektet akar kezdeni? Ez törli az alapsíkot és az összes nem mentett beállítást."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:202
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:256
+msgctxt "@label"
+msgid "Firmware version"
+msgstr "Frimware verzió"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Piactér"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:212
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:266
+msgctxt "@label"
+msgid "Address"
+msgstr "Cím"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:232
 msgctxt "@label"
-msgid "Build plate"
-msgstr "Tárgyasztal"
+msgid "This printer is not set up to host a group of printers."
+msgstr "Ez a nyomtató nem úgy van beállítva, hogy nyomtatócsoportot üzemeltessen."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
-msgctxt "@tooltip"
-msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
-msgstr "A fűthető ágy beállítható célhőmérséklete. Ha beállítjuk ezt az értéket a tálca elkezd erre a hőmérsékletre melegedni, vagy éppen lehűlni. Ha az érték 0 a tálcafűtés kikapcsol."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:236
+msgctxt "@label"
+msgid "This printer is the host for a group of %1 printers."
+msgstr "Ez a nyomtató gazdagépe a %1 nyomtatócsoportnak."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
-msgctxt "@tooltip"
-msgid "The current temperature of the heated bed."
-msgstr "A fűthető ágy aktuális hőmérséklete."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:245
+msgctxt "@label"
+msgid "The printer at this address has not yet responded."
+msgstr "A címen található nyomtató még nem válaszolt."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the bed to."
-msgstr "A tálca előmelegítési hőmérséklete."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:250
+msgctxt "@action:button"
+msgid "Connect"
+msgstr "Csatlakozás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
-msgctxt "@button Cancel pre-heating"
-msgid "Cancel"
-msgstr "Elvet"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:261
+msgctxt "@title:window"
+msgid "Invalid IP address"
+msgstr "Hibás IP cím"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
-msgctxt "@button"
-msgid "Pre-heat"
-msgstr "Előfűtés"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:262
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:141
+msgctxt "@text"
+msgid "Please enter a valid IP address."
+msgstr "Kérlek adj meg egy érvényes IP címet."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
-msgstr "A fűthető tálcát, a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:272
+msgctxt "@title:window"
+msgid "Printer Address"
+msgstr "Nyomtató cím"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:56
-msgctxt "@info:status"
-msgid "The printer is not connected."
-msgstr "A nyomtató nincs csatlakoztatva."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:97
+msgctxt "@label"
+msgid "Enter the IP address of your printer on the network."
+msgstr "Írd be a nyomtató hálózati IP címét."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
+msgctxt "@title:window"
+msgid "Configuration Changes"
+msgstr "Konfiguráció változások"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:36
+msgctxt "@action:button"
+msgid "Override"
+msgstr "Felülírás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:83
 msgctxt "@label"
-msgid "Printer control"
-msgstr "Nyomtató vezérlés"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatás szükséges:"
+msgstr[1] "A hozzárendelt nyomtatóhoz, %1, a következő konfigurációs változtatások szükségesek:"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:87
 msgctxt "@label"
-msgid "Jog Position"
-msgstr "Léptetőgomb pozíció"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "A %1 nyomtató hozzá van rendelve a feladathoz, azonban az ismeretlen anyagot tartalmaz."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:97
 msgctxt "@label"
-msgid "X/Y"
-msgstr "X/Y"
+msgid "Change material %1 from %2 to %3."
+msgstr "Változtasd meg az %1 anyagot %2 -ről %3 -ra."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:100
 msgctxt "@label"
-msgid "Z"
-msgstr "Z"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Töltsd be %3 -at %1 anyagként. (Ez nem felülbírálható)."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:103
 msgctxt "@label"
-msgid "Jog Distance"
-msgstr "Léptetőgomb távolság"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Cseréld a nyomtató magot %1 -ről %2 -re, %3 -hoz."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:106
 msgctxt "@label"
-msgid "Send G-code"
-msgstr "G-kód küldés"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Változtasd meg a tálcát %1 -re (Ez nem felülbírálható)."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
-msgctxt "@tooltip of G-code command input"
-msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
-msgstr "Küldjön egy egyéni G-kód parancsot a csatlakoztatott nyomtatóra. A parancs elküldéséhez nyomja meg az 'enter' gombot."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:113
+msgctxt "@label"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "A felülbírálás a megadott beállításokat fogja használni a meglévő nyomtató konfigurációval, azonban ez eredménytelen nyomtatáshoz vezethet."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:151
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:178
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:175
 msgctxt "@label"
-msgid "Extruder"
-msgstr "Extruder"
+msgid "Glass"
+msgstr "Üveg"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
-msgctxt "@tooltip"
-msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
-msgstr "A nyomtatófej célhőmérséklete. A fűtőblokk hőmérséklete a beállított értékre fog melegedni, vagy éppen hűlni. Ha ez az érték 0, akkor a fejfűtés ki fog kapcsolni."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:154
+msgctxt "@label"
+msgid "Aluminum"
+msgstr "Alumínium"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
-msgctxt "@tooltip"
-msgid "The current temperature of this hotend."
-msgstr "Ennek a fejnek a jelenlegi hőmérséklete."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+msgctxt "@label"
+msgid "Move to top"
+msgstr "Lépj a tetjére"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
-msgctxt "@tooltip of temperature input"
-msgid "The temperature to pre-heat the hotend to."
-msgstr "A nyomtatófej előmelegítési hőmérséklete."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+msgctxt "@label"
+msgid "Delete"
+msgstr "Törlés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
-msgctxt "@tooltip of pre-heat"
-msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
-msgstr "A nyomtatófejet a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284
+msgctxt "@label"
+msgid "Resume"
+msgstr "Folytat"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
-msgctxt "@tooltip"
-msgid "The colour of the material in this extruder."
-msgstr "Az alapanyag színe ennél az extrudernél."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+msgctxt "@label"
+msgid "Pausing..."
+msgstr "Várakozás..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
-msgctxt "@tooltip"
-msgid "The material in this extruder."
-msgstr "Az alapanyag ebben az extruderben."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+msgctxt "@label"
+msgid "Resuming..."
+msgstr "Folytatás..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
-msgctxt "@tooltip"
-msgid "The nozzle inserted in this extruder."
-msgstr "A fúvóka be van építve az extruderbe."
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:279
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:288
+msgctxt "@label"
+msgid "Pause"
+msgstr "Várakozás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
-msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Projekt fájl megnyitása"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Aborting..."
+msgstr "Megszakítás..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Ez egy Cura projekt fájl. Szeretné projektként megnyitni, vagy importálni a modelleket?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+msgctxt "@label"
+msgid "Abort"
+msgstr "Megszakít"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:91
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Emlékezzen a választásra"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:142
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to move %1 to the top of the queue?"
+msgstr "Biztos, hogy a %1 a nyomtatási sor elejére akarod mozgatni?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:105
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Megnyitás projektként"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+msgctxt "@window:title"
+msgid "Move print job to top"
+msgstr "Tedd a nyomtatási sor elejére"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:110
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Modellek importálása"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:151
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to delete %1?"
+msgstr "Biztos, hogy törölni szeretnéd %1?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
-msgctxt "@title:window"
-msgid "Save Project"
-msgstr "Projekt mentése"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:152
+msgctxt "@window:title"
+msgid "Delete print job"
+msgstr "Nyomtatási feladat törlés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:168
-msgctxt "@action:label"
-msgid "Extruder %1"
-msgstr "Extruder %1"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:160
+msgctxt "@label %1 is the name of a print job."
+msgid "Are you sure you want to abort %1?"
+msgstr "Biztosan meg akarod szakítani %1?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:184
-msgctxt "@action:label"
-msgid "%1 & material"
-msgstr "%1 & alapanyag"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:161
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:326
+msgctxt "@window:title"
+msgid "Abort print"
+msgstr "Nyomtatás megszakítás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:186
-msgctxt "@action:label"
-msgid "Material"
-msgstr "Alapanyag"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:148
+msgctxt "@label link to Connect and Cloud interfaces"
+msgid "Manage printer"
+msgstr "Nyomtató kezelés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:275
-msgctxt "@action:label"
-msgid "Don't show project summary on save again"
-msgstr "Ne mutassa újra a projekt összegzését mentés közben"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:241
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:467
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:239
+msgctxt "@info"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "A távoli nyomtatásisor kezeléshez kérjük frissítse a firmware-t."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:289
-msgctxt "@action:button"
-msgid "Save"
-msgstr "Mentés"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:275
+msgctxt "@info"
+msgid "Webcam feeds for cloud printers cannot be viewed from Ultimaker Cura. Click \"Manage printer\" to visit Ultimaker Digital Factory and view this webcam."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:637
-msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Fájl(ok) megnyitása"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:335
+msgctxt "@label:status"
+msgid "Loading..."
+msgstr "Betöltés..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
-msgctxt "@text:window"
-msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
-msgstr "Egy vagy több projekt fájlt találtunk a kiválasztott fájlokban.Egyszerre csak egy projekt fájlt nyithat meg. Javasoljuk, hogy csak a modelleket importálja ezekből a fájlokból. Szeretné folytatni?"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:339
+msgctxt "@label:status"
+msgid "Unavailable"
+msgstr "Elérhetetlen"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
-msgctxt "@action:button"
-msgid "Import all as models"
-msgstr "Importáljunk mindent modellekként"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:343
+msgctxt "@label:status"
+msgid "Unreachable"
+msgstr "Elérhetetlen"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:15
-msgctxt "@title:window The argument is the application name."
-msgid "About %1"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:347
+msgctxt "@label:status"
+msgid "Idle"
+msgstr "Készenlét"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:351
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:76
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Előkészítés..."
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+msgctxt "@label:status"
+msgid "Printing"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:397
 msgctxt "@label"
-msgid "version: %1"
-msgstr "verzió: %1"
+msgid "Untitled"
+msgstr "Felirat nélküli"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:412
 msgctxt "@label"
-msgid "End-to-end solution for fused filament 3D printing."
-msgstr "Teljes körű megoldás az olvadószálas 3D-s nyomtatáshoz."
+msgid "Anonymous"
+msgstr "Névtelen"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:85
-msgctxt "@info:credit"
-msgid ""
-"Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
-"Cura proudly uses the following open source projects:"
-msgstr "A Cura-t az Ultimaker B.V fejlesztette ki a közösséggel együttműködésben. A Cura büszkén használja a következő nyílt forráskódú projekteket:"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:433
+msgctxt "@label:status"
+msgid "Requires configuration changes"
+msgstr "A konfiguráció változtatásokat igényel"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:134
-msgctxt "@label"
-msgid "Graphical user interface"
-msgstr "Grafikai felhasználói interfész"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:447
+msgctxt "@action:button"
+msgid "Details"
+msgstr "Részletek"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:126
 msgctxt "@label"
-msgid "Application framework"
-msgstr "Alkalmazás keretrendszer"
+msgid "Unavailable printer"
+msgstr "Elérhetetlen nyomtató"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:128
 msgctxt "@label"
-msgid "G-code generator"
-msgstr "G-kód generátor"
+msgid "First available"
+msgstr "Az első elérhető"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:137
-msgctxt "@label"
-msgid "Interprocess communication library"
-msgstr "Folyamatközi kommunikációs könyvtár"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Megszakítva"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:139
-msgctxt "@label"
-msgid "Programming language"
-msgstr "Programozási nyelv"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:72
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:74
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Befejezve"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:140
-msgctxt "@label"
-msgid "GUI framework"
-msgstr "GUI keretrendszer"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Megszakítás..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:141
-msgctxt "@label"
-msgid "GUI framework bindings"
-msgstr "GUI keretrendszer függőségek"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Failed"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:142
-msgctxt "@label"
-msgid "C/C++ Binding library"
-msgstr "C/C++ függőségek könyvtár"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Várakozás..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:143
-msgctxt "@label"
-msgid "Data interchange format"
-msgstr "Adat csere formátum"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Várakozás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:144
-msgctxt "@label"
-msgid "Support library for scientific computing"
-msgstr "Támogató könyvtár a tudományos számítások számára"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:102
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Folytatás..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:145
-msgctxt "@label"
-msgid "Support library for faster math"
-msgstr "Támogató könyvtár a gyorsabb matematikához"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:104
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Beavatkozás szükséges"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:146
-msgctxt "@label"
-msgid "Support library for handling STL files"
-msgstr "Támogató könyvtár az STL fájlok kezeléséhez"
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:106
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Befejezve %1 a %2 -ből"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:29
 msgctxt "@label"
-msgid "Support library for handling triangular meshes"
-msgstr "Támogató könyvtár a háromszög hálók kezeléséhez"
+msgid "Queued"
+msgstr "Nyomtatási Sor"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:63
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Kezelés a böngészőben"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:90
 msgctxt "@label"
-msgid "Support library for handling 3MF files"
-msgstr "Támogató könyvtár a 3MF fájlok kezeléséhez"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Nincs a sorban nyomtatási feladat. Szeletelj és adj hozzá egy feladatot."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:98
 msgctxt "@label"
-msgid "Support library for file metadata and streaming"
-msgstr "Támogató könyvtár a fájl metaadatokhoz és továbbításához"
+msgid "Print jobs"
+msgstr "Nyomtatások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:107
 msgctxt "@label"
-msgid "Serial communication library"
-msgstr "Soros kommunikációs könyvtár"
+msgid "Total print time"
+msgstr "Teljes nyomtatási idő"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:116
 msgctxt "@label"
-msgid "ZeroConf discovery library"
-msgstr "ZeroConf felderítő könyvtár"
+msgid "Waiting for"
+msgstr "Várakozom"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:12
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Nyomtatás hálózaton"
+
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:53
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Nyomtatás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:81
 msgctxt "@label"
-msgid "Polygon clipping library"
-msgstr "Poligon daraboló könyvtár"
+msgid "Printer selection"
+msgstr "Nyomtató kiválasztás"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Bejelentkezés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:19
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:64
 msgctxt "@label"
-msgid "Python bindings for Clipper"
+msgid "Sign in to the Ultimaker platform"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:154
-msgctxt "@Label"
-msgid "Static type checker for Python"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:39
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:155
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:156
-msgctxt "@Label"
-msgid "Root Certificates for validating SSL trustworthiness"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:58
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:157
-msgctxt "@Label"
-msgid "Python Error tracking library"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Checking..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
 msgctxt "@label"
-msgid "Polygon packing library, developed by Prusa Research"
+msgid "Account synced"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:49
 msgctxt "@label"
-msgid "Python bindings for libnest2d"
+msgid "Something went wrong..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:160
-msgctxt "@label"
-msgid "Support library for system keyring access"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:102
+msgctxt "@button"
+msgid "Install pending updates"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:161
-msgctxt "@label"
-msgid "Python extensions for Microsoft Windows"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:123
+msgctxt "@button"
+msgid "Check for account updates"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:162
-msgctxt "@label"
-msgid "Font"
-msgstr "Betűtípus"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:78
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:107
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:126
+msgctxt "@button"
+msgid "Sign Out"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "SVG icons"
-msgstr "SVG ikonok"
+msgid "No time estimation available"
+msgstr "Nincs időbecslés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
 msgctxt "@label"
-msgid "Linux cross-distribution application deployment"
-msgstr "Linux kereszt-disztribúciós alkalmazás telepítése"
+msgid "No cost estimation available"
+msgstr "Nincs költségbecslés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:14
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Változtatások megtartása vagy eldobása"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Előnézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:50
-msgctxt "@text:window, %1 is a profile name"
-msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+msgctxt "@label"
+msgid "Time estimation"
+msgstr "Időbecslés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:76
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Profil beállítások"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:107
+msgctxt "@label"
+msgid "Material estimation"
+msgstr "Anyag becslés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:78
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:156
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1m"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:107
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:798
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Mindig kérdezz"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:157
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1g"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:108
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Eldobás és ne kérdezze újra"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Szeletelés..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:109
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Megtartás és ne kérdezze újra"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:78
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Nem szeletelhető"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:139
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:114
+msgctxt "@button"
+msgid "Processing"
+msgstr "Feldolgozás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:145
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:114
+msgctxt "@button"
+msgid "Slice"
+msgstr "Szeletelés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Widgets/ComboBox.qml:18
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:115
 msgctxt "@label"
-msgid "No items to select from"
-msgstr ""
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open File(s)..."
-msgstr ""
+msgid "Start the slicing process"
+msgstr "Szeletelés indítása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "Legutóbbi fájlok"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:132
+msgctxt "@button"
+msgid "Cancel"
+msgstr "Elvet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:81
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Láthatósági beállítások"
+msgid "Show Online Troubleshooting"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:45
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:88
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr ""
+msgid "Toggle Full Screen"
+msgstr "Teljes képernyőre váltás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:54
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:96
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Beállítások láthatóságának kezelése..."
+msgid "Exit Full Screen"
+msgstr "Kilépés a teljes képernyőn"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:34
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Alapanyag"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:103
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "&Visszavon"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:49
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Beállítva aktív extruderként"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:113
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Újra"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:55
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Extruder engedélyezése"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:131
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "Kilép"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SettingsMenu.qml:63
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Extruder letiltása"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+msgctxt "@action:inmenu menubar:view"
+msgid "3D View"
+msgstr "3D nézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Alapanyag"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+msgctxt "@action:inmenu menubar:view"
+msgid "Front View"
+msgstr "Előlnézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:53
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Kedvencek"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+msgctxt "@action:inmenu menubar:view"
+msgid "Top View"
+msgstr "Felülnézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/MaterialMenu.qml:78
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Generikus"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+msgctxt "@action:inmenu menubar:view"
+msgid "Bottom View"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/HelpMenu.qml:14
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Segítség"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu menubar:view"
+msgid "Left Side View"
+msgstr "Bal oldalnézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Fájl"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:view"
+msgid "Right Side View"
+msgstr "Jobb oldalnézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:44
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:188
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Cura beállítása..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:77
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Nyomtató hozzáadása..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/FileMenu.qml:88
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Kiválasztás exportálása..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:201
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Nyomtatók kezelése..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PreferencesMenu.qml:21
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "P&referenciák"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:208
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Anyagok kezelése..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/EditMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "S&zerkesztés"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:216
+msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
+msgid "Add more materials from Marketplace"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:13
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Nyomtató"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:223
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "Profil &frissítése a jelenlegi beállításokkal/felülírásokkal"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:17
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Hálózati nyomtatók"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:231
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "&Jelenlegi változtatások eldobása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/PrinterMenu.qml:50
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Helyi nyomtatók"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:243
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "Profil &létrehozása a jelenlegi beállításokkal/felülírásokkal..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ExtensionMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "K&iterjesztések"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:249
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Profilok kezelése..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Konfigurációk"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:257
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Online &Dokumentumok megjelenítése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
-msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Az elérhető konfigurációk betöltése a nyomtatóról..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Hibajelentés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
-msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "A konfiguráció nem elérhető, mert nincs kapcsolat a a nyomtatóval."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:273
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Újdonságok"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
-msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Ez a konfiguráció nem érhető el, mert a(z) %1 nem azonosítható. Kérjük, látogasson el a %2 webhelyre a megfelelő anyagprofil letöltéséhez."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:287
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Rólunk..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
-msgctxt "@label"
-msgid "Marketplace"
-msgstr "Piactér"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:294
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:101
-msgctxt "@tooltip"
-msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:304
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:105
-msgctxt "@tooltip"
-msgid "There are no profiles matching the configuration of this extruder."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:313
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:245
-msgctxt "@label"
-msgid "Select configuration"
-msgstr "Konfiguráció kiválasztása"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:322
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Modell törlés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:354
-msgctxt "@label"
-msgid "Configurations"
-msgstr "Konfigurációk"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:330
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "&Középső modell a platformon"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
-msgctxt "@header"
-msgid "Custom"
-msgstr "Egyéni"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:336
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "&Csoportosítás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
-msgctxt "@label"
-msgid "Printer"
-msgstr "Nyomtató"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:356
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Csoport bontása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:214
-msgctxt "@label"
-msgid "Enabled"
-msgstr "Bekapcsolt"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:366
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "&Modellek keverése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:263
-msgctxt "@label"
-msgid "Material"
-msgstr "Alapanyag"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:376
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Modell többszörözés..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:391
-msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Használj ragasztót a jobb tapadás érdekében, ennél az alapanyag kombinációnál."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Mindent kijelöl"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:29
-msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Kiválasztott modell nyomtatása:"
-msgstr[1] "Kiválasztott modellek nyomtatása:"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:393
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Tárgyasztal törlése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:92
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Kiválasztott modell sokszorozása"
-msgstr[1] "Kiválasztott modellek sokszorozása"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:403
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Mindent újratölt"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ContextMenu.qml:123
-msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Másolatok száma"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Minden modell rendezése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Save Project..."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:420
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Kijelöltek rendezése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "&Nézet"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Minden modellpozíció visszaállítása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:17
-msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Kamera helyzet"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Minden modelltranszformáció visszaállítása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:30
-msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Kamera nézet"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:443
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "Fájl(ok) megnyitása..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:48
-msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspektívikus"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:453
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "Új projekt..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Menus/ViewMenu.qml:59
-msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Merőleges"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:460
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Konfigurációs mappa megjelenítése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Nézet típus"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:467
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:476
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Beállítások láthatóságának beállítása..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:19
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:64
-msgctxt "@label"
-msgid "Sign in to the Ultimaker platform"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:32
+msgctxt "@label:button"
+msgid "My printers"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:39
-msgctxt "@text"
-msgid ""
-"- Add material profiles and plug-ins from the Marketplace\n"
-"- Back-up and sync your material profiles and plug-ins\n"
-"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:34
+msgctxt "@tooltip:button"
+msgid "Monitor printers in Ultimaker Digital Factory."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/GeneralOperations.qml:58
-msgctxt "@button"
-msgid "Create a free Ultimaker account"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:41
+msgctxt "@tooltip:button"
+msgid "Create print projects in Digital Library."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Bejelentkezés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:77
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:46
+msgctxt "@label:button"
+msgid "Print jobs"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:104
-msgctxt "@button"
-msgid "Ultimaker Account"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:48
+msgctxt "@tooltip:button"
+msgid "Monitor print jobs and reprint from your print history."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/UserOperations.qml:120
-msgctxt "@button"
-msgid "Sign Out"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:55
+msgctxt "@tooltip:button"
+msgid "Extend Ultimaker Cura with plugins and material profiles."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:28
-msgctxt "@label"
-msgid "Checking..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:62
+msgctxt "@tooltip:button"
+msgid "Become a 3D printing expert with Ultimaker e-learning."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:35
-msgctxt "@label"
-msgid "Account synced"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:67
+msgctxt "@label:button"
+msgid "Ultimaker support"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:42
-msgctxt "@label"
-msgid "Something went wrong..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:69
+msgctxt "@tooltip:button"
+msgid "Learn how to get started with Ultimaker Cura."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:95
-msgctxt "@button"
-msgid "Install pending updates"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:74
+msgctxt "@label:button"
+msgid "Ask a question"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Account/SyncState.qml:116
-msgctxt "@button"
-msgid "Check for account updates"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:76
+msgctxt "@tooltip:button"
+msgid "Consult the Ultimaker Community."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:54
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Szeletelés..."
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:81
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Nem szeletelhető"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
-msgctxt "@button"
-msgid "Processing"
-msgstr "Feldolgozás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:120
-msgctxt "@button"
-msgid "Slice"
-msgstr "Szeletelés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:121
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Szeletelés indítása"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:137
-msgctxt "@button"
-msgid "Cancel"
-msgstr "Elvet"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
-msgctxt "@label"
-msgid "Time estimation"
-msgstr "Időbecslés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
-msgctxt "@label"
-msgid "Material estimation"
-msgstr "Anyag becslés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1m"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:81
+msgctxt "@label:button"
+msgid "Report a bug"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1g"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:83
+msgctxt "@tooltip:button"
+msgid "Let developers know that something is going wrong."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
-msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Nincs időbecslés"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ApplicationSwitcher/ApplicationSwitcherPopup.qml:90
+msgctxt "@tooltip:button"
+msgid "Visit the Ultimaker website."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ColorDialog.qml:107
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Nincs költségbecslés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Előnézet"
+msgid "Hex"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:253
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:250
 msgctxt "@label"
 msgid "This package will be installed after restarting."
 msgstr "Ez a csomag újraindítás után fog települni."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:463
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:14
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:463
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:14
 msgctxt "@title:tab"
 msgid "General"
 msgstr "Általános"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:466
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466
 msgctxt "@title:tab"
 msgid "Settings"
 msgstr "Beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:468
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:17
 msgctxt "@title:tab"
 msgid "Printers"
 msgstr "Nyomtatók"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:470
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:470
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:70
 msgctxt "@title:tab"
 msgid "Materials"
 msgstr "Alapanyagok"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:472
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:56
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:472
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:57
 msgctxt "@title:tab"
 msgid "Profiles"
 msgstr "Profilok"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:589
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:589
 msgctxt "@title:window %1 is the application name"
 msgid "Closing %1"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:590
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:599
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:590
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:599
 msgctxt "@label %1 is the application name"
 msgid "Are you sure you want to exit %1?"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:747
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:637
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:16
+msgctxt "@title:window"
+msgid "Open file(s)"
+msgstr "Fájl(ok) megnyitása"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:742
 msgctxt "@window:title"
 msgid "Install Package"
 msgstr "Csomag telepítése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:754
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:749
 msgctxt "@title:window"
 msgid "Open File(s)"
 msgstr "Fájl(ok) megnyitása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:756
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:751
 msgctxt "@text:window"
 msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
 msgstr "A kiválasztott fájlok között több G-kód fájl is található.Egyszerre csak egy G-kód fájlt nyithat meg, ezért csak egy ilyen fájlt válasszon ki."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:836
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:831
 msgctxt "@title:window"
 msgid "Add Printer"
 msgstr "Nyomtató hozzáadása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Cura.qml:844
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:839
 msgctxt "@title:window"
 msgid "What's New"
 msgstr "Újdonságok"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Be"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+msgctxt "@title:window The argument is the application name."
+msgid "About %1"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Ki"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+msgctxt "@label"
+msgid "version: %1"
+msgstr "verzió: %1"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
-msgid "Experimental"
-msgstr "Tapasztalati"
+msgid "End-to-end solution for fused filament 3D printing."
+msgstr "Teljes körű megoldás az olvadószálas 3D-s nyomtatáshoz."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+msgctxt "@info:credit"
+msgid ""
+"Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
+"Cura proudly uses the following open source projects:"
+msgstr "A Cura-t az Ultimaker B.V fejlesztette ki a közösséggel együttműködésben. A Cura büszkén használja a következő nyílt forráskódú projekteket:"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Nyomtatási beállítások"
+msgid "Graphical user interface"
+msgstr "Grafikai felhasználói interfész"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "A nyomtatás beállítása letiltva. A G-kód fájl nem módosítható."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+msgctxt "@label"
+msgid "Application framework"
+msgstr "Alkalmazás keretrendszer"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Ajánlott"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+msgctxt "@label"
+msgid "G-code generator"
+msgstr "G-kód generátor"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Egyéni"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:139
+msgctxt "@label"
+msgid "Interprocess communication library"
+msgstr "Folyamatközi kommunikációs könyvtár"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] ""
-msgstr[1] ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+msgctxt "@label"
+msgid "Python bindings for libnest2d"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:195
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Fokozatos kitöltés"
+msgid "Polygon packing library, developed by Prusa Research"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:233
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "A fokozatos kitöltés folyamatosan növeli a kitöltés mennyiségét, ahogy közeledik a tárgy teteje felé."
+msgid "Support library for handling 3MF files"
+msgstr "Támogató könyvtár a 3MF fájlok kezeléséhez"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
-msgid "Support"
-msgstr "Támasz"
+msgid "Support library for file metadata and streaming"
+msgstr "Támogató könyvtár a fájl metaadatokhoz és továbbításához"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "A támasz létrehozása segíti a modell kinyúló részeinek hibátlan nyomatását. Támasz nélkül, ezek a részek összeomlanak, és nem lehetséges a hibátlan nyomtatás."
+msgid "Programming language"
+msgstr "Programozási nyelv"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:50
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:779
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
-msgid "Profiles"
-msgstr "Profilok"
+msgid "GUI framework"
+msgstr "GUI keretrendszer"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:80
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "Megváltoztattál néhány profilbeállítást. Ha ezeket szeretnéd folyamatosan megtartani, akkor válaszd az 'Egyéni mód' -ot."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+msgctxt "@label"
+msgid "GUI framework bindings"
+msgstr "GUI keretrendszer függőségek"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
-msgid "Adhesion"
-msgstr "Letapadás"
+msgid "C/C++ Binding library"
+msgstr "C/C++ függőségek könyvtár"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Engedélyezze a peremet, vagy az aláúsztatást. Ez létre fog hozni a test szélén illetve az alján egy olyan részt, ami segíti a letapadást, viszont nyomtatás után ezek könnyen eltávolíthatóak a testről."
+msgid "Data interchange format"
+msgstr "Adat csere formátum"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
-msgctxt "@label:header"
-msgid "Custom profiles"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+msgctxt "@label"
+msgid "Font"
+msgstr "Betűtípus"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+msgctxt "@label"
+msgid "Polygon clipping library"
+msgstr "Poligon daraboló könyvtár"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+msgctxt "@label"
+msgid "JSON parser"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:147
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "A jelenlegi változások elvetése"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+msgctxt "@label"
+msgid "Utility functions, including an image loader"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@label"
-msgid "Profile"
-msgstr "Profil"
+msgid "Utility library, including Voronoi generation"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:157
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Root Certificates for validating SSL trustworthiness"
 msgstr ""
-"Néhány beállított vagy felülbírált érték eltérő, a profilban tárolt értéktől. \n"
-"\n"
-"Kattints, hogy megnyisd a profil menedzsert."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:37
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Beállítás"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Compatibility between Python 2 and 3"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:38
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profil"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:39
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Jelenlegi"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+msgctxt "@label"
+msgid "Support library for faster math"
+msgstr "Támogató könyvtár a gyorsabb matematikához"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ProfileOverview.qml:40
-msgctxt "@title:column Unit of measurement"
-msgid "Unit"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:165
+msgctxt "@label"
+msgid "Support library for handling STL files"
+msgstr "Támogató könyvtár az STL fájlok kezeléséhez"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:166
+msgctxt "@label"
+msgid "Python bindings for Clipper"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:22
-msgctxt "@title:window"
-msgid "Rename"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:167
+msgctxt "@label"
+msgid "Serial communication library"
+msgstr "Soros kommunikációs könyvtár"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:168
+msgctxt "@label"
+msgid "Support library for scientific computing"
+msgstr "Támogató könyvtár a tudományos számítások számára"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:169
+msgctxt "@Label"
+msgid "Python Error tracking library"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/RenameDialog.qml:23
-msgctxt "@info"
-msgid "Please provide a new name."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:170
+msgctxt "@label"
+msgid "Support library for handling triangular meshes"
+msgstr "Támogató könyvtár a háromszög hálók kezeléséhez"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:171
+msgctxt "@label"
+msgid "ZeroConf discovery library"
+msgstr "ZeroConf felderítő könyvtár"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+msgctxt "@label"
+msgid "Universal build system configuration"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
-msgctxt "@item:tooltip"
-msgid "This setting has been hidden by the active machine and will not be visible."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:175
+msgctxt "@label"
+msgid "Dependency and package manager"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
-msgctxt "@item:tooltip %1 is list of setting names"
-msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
-msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
-msgstr[0] ""
-msgstr[1] ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:176
+msgctxt "@label"
+msgid "Packaging Python-applications"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Láthatóság beállítása"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:177
+msgctxt "@label"
+msgid "Linux cross-distribution application deployment"
+msgstr "Linux kereszt-disztribúciós alkalmazás telepítése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:22
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:131
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:178
+msgctxt "@label"
+msgid "Generating Windows installers"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:17
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Projekt fájl megnyitása"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:83
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Ez egy Cura projekt fájl. Szeretné projektként megnyitni, vagy importálni a modelleket?"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:90
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Emlékezzen a választásra"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:104
 msgctxt "@action:button"
-msgid "Defaults"
+msgid "Open as project"
+msgstr "Megnyitás projektként"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:109
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Modellek importálása"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:13
+msgctxt "@title:window"
+msgid "Discard or Keep changes"
+msgstr "Változtatások megtartása vagy eldobása"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:49
+msgctxt "@text:window, %1 is a profile name"
+msgid "You have customized some profile settings. Would you like to Keep these changed settings after switching profiles? Alternatively, you can discard the changes to load the defaults from '%1'."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:53
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Mindent ellenőrizni"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:75
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Profil beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:49
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:77
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:104
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:799
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Mindig kérdezz"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:105
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Eldobás és ne kérdezze újra"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:106
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Megtartás és ne kérdezze újra"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:136
 msgctxt "@action:button"
-msgid "Add New"
+msgid "Discard changes"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:135
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:293
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:142
 msgctxt "@action:button"
-msgid "Activate"
-msgstr "Aktivál"
+msgid "Keep changes"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:47
+msgctxt "@text:window"
+msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
+msgstr "Egy vagy több projekt fájlt találtunk a kiválasztott fájlokban.Egyszerre csak egy projekt fájlt nyithat meg. Javasoljuk, hogy csak a modelleket importálja ezekből a fájlokból. Szeretné folytatni?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/MachinesPage.qml:147
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:330
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
 msgctxt "@action:button"
-msgid "Rename"
-msgstr "Átnevezés"
+msgid "Import all as models"
+msgstr "Importáljunk mindent modellekként"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:14
 msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Új átmérő megerősítése"
+msgid "Save Project"
+msgstr "Projekt mentése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Az új nyomtatószál átmérő %1 mm -re lett beállítva. Ez nem kompatibilis a jelenlegi extruderrel. Biztos, hogy így folytatod?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:175
+msgctxt "@action:label"
+msgid "Extruder %1"
+msgstr "Extruder %1"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Megjelenítendő név"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+msgctxt "@action:label"
+msgid "%1 & material"
+msgstr "%1 & alapanyag"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
-msgctxt "@label"
-msgid "Brand"
-msgstr "Márka"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:193
+msgctxt "@action:label"
+msgid "Material"
+msgstr "Alapanyag"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
-msgctxt "@label"
-msgid "Material Type"
-msgstr "Alapanyag típus"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:282
+msgctxt "@action:label"
+msgid "Don't show project summary on save again"
+msgstr "Ne mutassa újra a projekt összegzését mentés közben"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:209
-msgctxt "@label"
-msgid "Color"
-msgstr "Szín"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:296
+msgctxt "@action:button"
+msgid "Save"
+msgstr "Mentés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:261
-msgctxt "@title"
-msgid "Material color picker"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Kiválasztott modell nyomtatása %1"
+msgstr[1] "Kiválasztott modellek nyomtatása %1"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:274
-msgctxt "@label"
-msgid "Properties"
-msgstr "Tulajdonságok"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:93
+msgctxt "@text Print job name"
+msgid "Untitled"
+msgstr "Névtelen"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:285
-msgctxt "@label"
-msgid "Density"
-msgstr "Sűrűség"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:63
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "&Beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:318
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Átmérő"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:87
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Új projekt"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:368
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Nyomtatószál költség"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:88
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Biztos benne, hogy új projektet akar kezdeni? Ez törli az alapsíkot és az összes nem mentett beállítást."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:400
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Nyomtatószál súly"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:135
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Piactér"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:432
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Nyomtatószál hossz"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Konfigurációk"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:450
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Költség / méter"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Ez a konfiguráció nem érhető el, mert a(z) %1 nem azonosítható. Kérjük, látogasson el a %2 webhelyre a megfelelő anyagprofil letöltéséhez."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:464
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Ez az anyag kapcsolódik% 1 -hez és osztja néhány tulajdonságát."
+msgid "Marketplace"
+msgstr "Piactér"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:471
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:52
 msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Alapanyag leválasztása"
+msgid "Loading available configurations from the printer..."
+msgstr "Az elérhető konfigurációk betöltése a nyomtatóról..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:484
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:53
 msgctxt "@label"
-msgid "Description"
-msgstr "Leírás"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "A konfiguráció nem elérhető, mert nincs kapcsolat a a nyomtatóval."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:502
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:106
+msgctxt "@tooltip"
+msgid "The configuration of this extruder is not allowed, and prohibits slicing."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:110
+msgctxt "@tooltip"
+msgid "There are no profiles matching the configuration of this extruder."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:250
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Tapadási információ"
+msgid "Select configuration"
+msgstr "Konfiguráció kiválasztása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:637
-msgctxt "@title"
-msgid "Information"
-msgstr "Információ"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:358
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Konfigurációk"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:17
-msgctxt "@title:window"
-msgid "Sync materials with printers"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:27
+msgctxt "@header"
+msgid "Custom"
+msgstr "Egyéni"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:48
-msgctxt "@title:header"
-msgid "Sync materials with printers"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:62
+msgctxt "@label"
+msgid "Printer"
+msgstr "Nyomtató"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:54
-msgctxt "@text"
-msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:217
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Bekapcsolt"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:76
-msgctxt "@button"
-msgid "Why do I need to sync material profiles?"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:266
+msgctxt "@label"
+msgid "Material"
+msgstr "Alapanyag"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:85
-msgctxt "@button"
-msgid "Start"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:392
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Használj ragasztót a jobb tapadás érdekében, ennél az alapanyag kombinációnál."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:127
-msgctxt "@title:header"
-msgid "Sign in"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:29
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Kiválasztott modell nyomtatása:"
+msgstr[1] "Kiválasztott modellek nyomtatása:"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:133
-msgctxt "@text"
-msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:92
+msgctxt "@title:window"
+msgid "Multiply Selected Model"
+msgid_plural "Multiply Selected Models"
+msgstr[0] "Kiválasztott modell sokszorozása"
+msgstr[1] "Kiválasztott modellek sokszorozása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:157
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:587
-msgctxt "@button"
-msgid "Sync materials with USB"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:123
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Másolatok száma"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:190
-msgctxt "@title:header"
-msgid "The following printers will receive the new material profiles:"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/EditMenu.qml:12
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "S&zerkesztés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:197
-msgctxt "@title:header"
-msgid "Something went wrong when sending the materials to the printers."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ExtensionMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "K&iterjesztések"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:204
-msgctxt "@title:header"
-msgid "Material profiles successfully synced with the following printers:"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Fájl"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
-msgctxt "@button"
-msgid "Troubleshooting"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:45
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
-msgctxt "@text Asking the user whether printers are missing in a list."
-msgid "Printers missing?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:78
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
-msgctxt "@text"
-msgid "Make sure all your printers are turned ON and connected to Digital Factory."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:89
+msgctxt "@action:inmenu menubar:file"
+msgid "Export Selection..."
+msgstr "Kiválasztás exportálása..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
-msgctxt "@button"
-msgid "Refresh List"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/HelpMenu.qml:14
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Segítség"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
-msgctxt "@button"
-msgid "Try again"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Alapanyag"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
-msgctxt "@button"
-msgid "Done"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:53
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Kedvencek"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:607
-msgctxt "@button"
-msgid "Sync"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:78
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Generikus"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
-msgctxt "@button"
-msgid "Syncing"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
-msgctxt "@title:header"
-msgid "No printers found"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PreferencesMenu.qml:21
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "P&referenciák"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
-msgctxt "@text"
-msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:13
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Nyomtató"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:570
-msgctxt "@button"
-msgid "Learn how to connect your printer to Digital Factory"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:17
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Hálózati nyomtatók"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:598
-msgctxt "@button"
-msgid "Refresh"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:50
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Helyi nyomtatók"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:627
-msgctxt "@title:header"
-msgid "Sync material profiles via USB"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "Legutóbbi fájlok"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:633
-msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
-msgid "Follow the following steps to load the new material profiles to your printer."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
-msgctxt "@text"
-msgid "Click the export material archive button."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:34
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Alapanyag"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:666
-msgctxt "@text"
-msgid "Save the .umm file on a USB stick."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:49
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Beállítva aktív extruderként"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:667
-msgctxt "@text"
-msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:55
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Extruder engedélyezése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:675
-msgctxt "@button"
-msgid "How to load new material profiles to my printer"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:63
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Extruder letiltása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:689
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
-msgctxt "@button"
-msgid "Back"
-msgstr "Vissza"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:16
+msgctxt "@action:inmenu"
+msgid "Visible Settings"
+msgstr "Láthatósági beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:698
-msgctxt "@button"
-msgid "Export material archive"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+msgctxt "@action:inmenu"
+msgid "Collapse All Categories"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:733
-msgctxt "@title:window"
-msgid "Export All Materials"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Beállítások láthatóságának kezelése..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
-msgctxt "@label"
-msgid "Materials compatible with active printer:"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:13
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "&Nézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:93
-msgctxt "@action:button"
-msgid "Create new"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:17
+msgctxt "@action:inmenu menubar:view"
+msgid "&Camera position"
+msgstr "&Kamera helyzet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:87
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Import"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:30
+msgctxt "@action:inmenu menubar:view"
+msgid "Camera view"
+msgstr "Kamera nézet"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
-msgctxt "@action:button"
-msgid "Sync with Printers"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:48
+msgctxt "@action:inmenu menubar:view"
+msgid "Perspective"
+msgstr "Perspektívikus"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:310
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Másolat"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+msgctxt "@action:inmenu menubar:view"
+msgid "Orthographic"
+msgstr "Merőleges"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:341
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Export"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:115
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Nincs nyomtatóhoz csatlakoztatva"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:386
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Eltávolítás megerősítése"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "A nyomtató nem fogadja a parancsokat"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:387
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Biztosan el akarod távolítani %1 -et? Ez nem vonható vissza!"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:129
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "Karbantartás alatt. Ellenőrizze a nyomtatót"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Alapanyag importálás"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:140
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Elveszett a kapcsolat a nyomtatóval"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Sikeres alapanyag import <filename>%1</filename>"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:142
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Nyomtatás..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Nem sikerült importálni az alapanyagot <filename>%1</filename>: <message>%2</message>"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:145
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Felfüggsztve"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:265
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Alapanyag export"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:148
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Előkészítés..."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:270
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Sikertelen alapanyag export <filename>%1</filename>: <message>%2</message>"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:150
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Távolítsa el a tárgyat"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:273
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Sikeres alapanyag export <filename>%1</filename> -ba"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:318
+msgctxt "@label"
+msgid "Abort Print"
+msgstr "Nyomtatás megszakítás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:58
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:327
 msgctxt "@label"
-msgid "Profiles compatible with active printer:"
-msgstr ""
+msgid "Are you sure you want to abort the print?"
+msgstr "Biztosan meg akarod szakítani a nyomtatást?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:97
-msgctxt "@action:tooltip"
-msgid "Create new profile from current settings/overrides"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:109
+msgctxt "@label"
+msgid "Is printed as support."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:124
-msgctxt "@action:label"
-msgid "Some settings from current profile were overwritten."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:112
+msgctxt "@label"
+msgid "Other models overlapping with this model are modified."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:139
-msgctxt "@action:button"
-msgid "Update profile."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:115
+msgctxt "@label"
+msgid "Infill overlapping with this model is modified."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:142
-msgctxt "@action:tooltip"
-msgid "Update profile with current settings/overrides"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:118
+msgctxt "@label"
+msgid "Overlaps with this model are not supported."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:157
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Ez a profil a nyomtató által megadott alapértelmezéseket használja, tehát az alábbi listában nincs egyetlen beállítás módosítás sem."
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:164
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Az Ön aktuális beállításai megegyeznek a kiválasztott profillal."
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:174
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Általános beállítások"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:277
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Profil készítés"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:279
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Adjon nevet ehhez a profilhoz."
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:351
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:362
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profil exportálás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:376
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Profil másolása"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:125
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] ""
+msgstr[1] ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:403
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Profil átnevezés"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Objektum lista"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:416
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/ProfilesPage.qml:423
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profil importálás"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:131
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:24
+msgctxt "@action:button"
+msgid "Defaults"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:169
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:169
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interfész"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:213
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:212
 msgctxt "@heading"
 msgid "-- incomplete --"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:258
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:258
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Pénznem:"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:273
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:274
 msgctxt "@label: Please keep the asterix, it's to indicate that a restart is needed."
 msgid "Theme*:"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:319
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:320
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Automatikus újraszeletelés, ha a beállítások megváltoznak."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:327
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:328
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Automatikus szeletelés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:336
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:337
 msgctxt "@label"
 msgid "*You will need to restart the application for these changes to have effect."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:352
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "A nézetablak viselkedése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:359
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Jelölje meg pirossal azokat a területeket, amiket szükséges alátámasztani.Ha ezeket a részeket nem támasztjuk alá, a nyomtatás nem lesz hibátlan."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:369
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Túlnyúlás kijelzése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:378
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:379
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:387
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:395
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:396
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "A kamerát úgy mozgatja, hogy a modell kiválasztásakor, az a nézet középpontjában legyen"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:400
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:401
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Kamera középre, mikor az elem ki van választva"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:410
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:411
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Megfordítsuk-e az alapértelmezett Zoom viselkedését?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:415
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:416
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Fordítsa meg a kamera zoom irányát."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:432
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "A nagyítás az egér mozgatásának irányában mozogjon?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:431
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:432
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Az egér felé történő nagyítás ortográfiai szempontból nem támogatott."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:436
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:437
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Nagyítás az egér mozgás irányában"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:462
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:463
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Az alapsíkon lévő modelleket elmozgassuk úgy, hogy ne keresztezzék egymást?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:467
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:468
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "A modellek egymástól való távtartásának biztosítása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:476
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:477
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "A modelleket mozgatni kell lefelé, hogy érintsék a tárgyasztalt?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:481
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:482
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Modellek automatikus tárgyasztalra illesztése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:493
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:494
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Figyelmeztető üzenet megjelenítése g-kód olvasóban."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:502
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Figyelmeztető üzenet a g-code olvasóban"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:510
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:511
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Kényszerítsük a réteget kompatibilitási módba ?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:515
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:516
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "A rétegnézet kompatibilis módjának kényszerítése (újraindítás szükséges)"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:525
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:526
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:530
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:540
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:541
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Milyen fípusú fényképezőgépet használunk?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:547
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:548
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:554
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:555
 msgid "Perspective"
 msgstr "Perspetívikus"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:555
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:556
 msgid "Orthographic"
 msgstr "Merőleges"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:595
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:596
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Fájlok megnyitása és mentése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:602
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:603
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:607
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:608
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:618
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:619
 msgctxt "@info:tooltip"
 msgid "Should the build plate be cleared before loading a new model in the single instance of Cura?"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:624
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:625
 msgctxt "@option:check"
 msgid "Clear buildplate before loading model into the single instance"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:634
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "A modelleket átméretezzük a maximális építési méretre, ha azok túl nagyok?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:639
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:640
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Nagy modellek átméretezése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:650
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Egy adott modell rendkívül kicsinek tűnhet, ha mértékegysége például méterben van, nem pedig milliméterben. Ezeket a modelleket átméretezzük?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:654
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:655
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Extrém kicsi modellek átméretezése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:664
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:665
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Betöltés után a modellek legyenek kiválasztva?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:669
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:670
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Modell kiválasztása betöltés után"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:679
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:680
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "A nyomtató nevét, mint előtagot, hozzáadjuk a nyomtatási feladat nevéhez?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:684
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:685
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Gépnév előtagként a feladatnévben"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:694
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:695
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Mutassuk az összegzést a projekt mentésekor?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:698
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:699
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Összegzés megjelenítése projekt mentésekor"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:708
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:709
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Alapértelmezett viselkedés a projektfájl megnyitásakor"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:716
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:717
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Alapértelmezett viselkedés a projektfájl megnyitásakor: "
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:731
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:732
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Mindig kérdezz"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:732
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Projektként való megnyitás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:734
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Importálja a modelleket"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:770
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:771
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Ha módosított egy profilt, és váltott egy másikra, akkor megjelenik egy párbeszédpanel, amelyben megkérdezi, hogy meg kívánja-e tartani a módosításokat, vagy nem. Vagy választhat egy alapértelmezett viselkedést, és soha többé nem jeleníti meg ezt a párbeszédablakot."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:784
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:780
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:36
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profilok"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:785
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Alapértelmezett viselkedés a megváltozott beállítási értékeknél, ha másik profilra vált: "
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:799
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:800
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Megváltozott beállítások elvetése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:800
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:801
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Megváltozott beállítások alkalmazása az új profilba"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:834
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:835
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Magán"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:840
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:841
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Elküldjük a nyomtatott adatokat név nélkül az Ultimaker-nek?Semmilyen személyes infromáció, IP cím vagy azonosító nem kerül elküldésre."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:845
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:846
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "Név nélküli információ küldés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:875
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:876
 msgctxt "@label"
 msgid "Updates"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:882
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:883
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "A Cura-nak ellenőriznie kell-e a frissítéseket a program indításakor?"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:887
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:888
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Keressen frissítéseket az induláskor"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:903
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:904
 msgctxt "@info:tooltip"
 msgid "When checking for updates, only check for stable releases."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:909
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:910
 msgctxt "@option:radio"
 msgid "Stable releases only"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:919
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:920
 msgctxt "@info:tooltip"
 msgid "When checking for updates, check for both stable and for beta releases."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:925
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:926
 msgctxt "@option:radio"
 msgid "Stable and Beta releases"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:935
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:936
 msgctxt "@info:tooltip"
 msgid "Should an automatic check for new plugins be done every time Cura is started? It is highly recommended that you do not disable this!"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Preferences/GeneralPage.qml:940
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:941
 msgctxt "@option:check"
 msgid "Get notifications for plugin updates"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:50
+msgctxt "@action:button"
+msgid "Add New"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:134
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:160
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Aktivál"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:146
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:331
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Átnevezés"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:72
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Nyomtató hozzáadása IP címmel"
+msgid "Materials compatible with active printer:"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:78
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:94
+msgctxt "@action:button"
+msgid "Create new"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:90
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:88
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Import"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:101
+msgctxt "@action:button"
+msgid "Sync with Printers"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:174
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:311
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Másolat"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:198
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:342
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Export"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:212
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:392
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Eltávolítás megerősítése"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:215
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:393
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Biztosan el akarod távolítani %1 -et? Ez nem vonható vissza!"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:228
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:238
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Alapanyag importálás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:242
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Sikeres alapanyag import <filename>%1</filename>"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:245
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Nem sikerült importálni az alapanyagot <filename>%1</filename>: <message>%2</message>"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:256
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:267
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Alapanyag export"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:272
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Sikertelen alapanyag export <filename>%1</filename>: <message>%2</message>"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:275
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Sikeres alapanyag export <filename>%1</filename> -ba"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:18
+msgctxt "@title:window"
+msgid "Sync materials with printers"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:49
+msgctxt "@title:header"
+msgid "Sync materials with printers"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:55
 msgctxt "@text"
-msgid "Enter your printer's IP address."
+msgid "Following a few simple steps, you will be able to synchronize all your material profiles with your printers."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:77
 msgctxt "@button"
-msgid "Add"
-msgstr "Hozzáad"
+msgid "Why do I need to sync material profiles?"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Nem sikerült csatlakozni az eszközhöz."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:86
+msgctxt "@button"
+msgid "Start"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:128
+msgctxt "@title:header"
+msgid "Sign in"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "Az ezen a címen található nyomtató még nem válaszolt."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:134
+msgctxt "@text"
+msgid "To automatically sync the material profiles with all your printers connected to Digital Factory you need to be signed in in Cura."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Ezt a nyomtatót nem lehet hozzáadni, mert ismeretlen a nyomtató vagy nem egy csoport tagja."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:158
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:446
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:586
+msgctxt "@button"
+msgid "Sync materials with USB"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:191
+msgctxt "@title:header"
+msgid "The following printers will receive the new material profiles:"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:198
+msgctxt "@title:header"
+msgid "Something went wrong when sending the materials to the printers."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:205
+msgctxt "@title:header"
+msgid "Material profiles successfully synced with the following printers:"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:242
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:429
 msgctxt "@button"
-msgid "Connect"
-msgstr "Csatlakozás"
+msgid "Troubleshooting"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
-msgctxt "@label"
-msgid "Release Notes"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:406
+msgctxt "@text Asking the user whether printers are missing in a list."
+msgid "Printers missing?"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Felhasználói Szerződés"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:408
+msgctxt "@text"
+msgid "Make sure all your printers are turned ON and connected to Digital Factory."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:53
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:417
 msgctxt "@button"
-msgid "Agree"
-msgstr "Elfogadás"
+msgid "Refresh List"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:457
 msgctxt "@button"
-msgid "Decline and close"
-msgstr "Elutasítás és bezárás"
+msgid "Try again"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:29
-msgctxt "@label"
-msgid "What's New"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:461
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:696
+msgctxt "@button"
+msgid "Done"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:184
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:463
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:606
 msgctxt "@button"
-msgid "Next"
-msgstr "Következő"
+msgid "Sync"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:519
+msgctxt "@button"
+msgid "Syncing"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:537
+msgctxt "@title:header"
+msgid "No printers found"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:558
+msgctxt "@text"
+msgid "It seems like you don't have any compatible printers connected to Digital Factory. Make sure your printer is connected and it's running the latest firmware."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:569
+msgctxt "@button"
+msgid "Learn how to connect your printer to Digital Factory"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:194
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:597
 msgctxt "@button"
-msgid "Add printer manually"
+msgid "Refresh"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:626
+msgctxt "@title:header"
+msgid "Sync material profiles via USB"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:632
+msgctxt "@text In the UI this is followed by a list of steps the user needs to take."
+msgid "Follow the following steps to load the new material profiles to your printer."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:663
 msgctxt "@text"
-msgid "Add material settings and plugins from the Marketplace"
+msgid "Click the export material archive button."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:664
 msgctxt "@text"
-msgid "Backup and sync your material settings and plugins"
+msgid "Save the .umm file on a USB stick."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:665
 msgctxt "@text"
-msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgid "Insert the USB stick into your printer and launch the procedure to load new material profiles."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:202
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:673
 msgctxt "@button"
-msgid "Skip"
+msgid "How to load new material profiles to my printer"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/CloudContent.qml:214
-msgctxt "@text"
-msgid "Create a free Ultimaker Account"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:687
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:299
+msgctxt "@button"
+msgid "Back"
+msgstr "Vissza"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Üdvözöljük az Ultimaker Cura-ban"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:696
+msgctxt "@button"
+msgid "Export material archive"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
-msgctxt "@text"
-msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsSyncDialog.qml:731
+msgctxt "@title:window"
+msgid "Export All Materials"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
-msgctxt "@button"
-msgid "Get started"
-msgstr "Kezdj hozzá"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:121
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Új átmérő megerősítése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:122
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Az új nyomtatószál átmérő %1 mm -re lett beállítva. Ez nem kompatibilis a jelenlegi extruderrel. Biztos, hogy így folytatod?"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:152
 msgctxt "@label"
-msgid "Empty"
-msgstr "Üres"
+msgid "Display Name"
+msgstr "Megjelenítendő név"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:206
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:171
 msgctxt "@label"
-msgid "Manufacturer"
-msgstr ""
+msgid "Brand"
+msgstr "Márka"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:217
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:190
 msgctxt "@label"
-msgid "Profile author"
-msgstr ""
+msgid "Material Type"
+msgstr "Alapanyag típus"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:229
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Printer name"
-msgstr "Nyomtató név"
+msgid "Color"
+msgstr "Szín"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:235
-msgctxt "@text"
-msgid "Please name your printer"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:262
+msgctxt "@title"
+msgid "Material color picker"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:275
 msgctxt "@label"
-msgid "Add a printer"
-msgstr "Nyomtató hozzáadása"
+msgid "Properties"
+msgstr "Tulajdonságok"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:286
 msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Hálózati nyomtató hozzáadása"
+msgid "Density"
+msgstr "Sűrűség"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:88
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:319
 msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Helyi nyomtató hozzáadása"
+msgid "Diameter"
+msgstr "Átmérő"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:369
 msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "A hálózaton nem található nyomtató."
+msgid "Filament Cost"
+msgstr "Nyomtatószál költség"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:401
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Frissítés"
+msgid "Filament weight"
+msgstr "Nyomtatószál súly"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:433
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Nyomtató hozzáadása IP címmel"
+msgid "Filament length"
+msgstr "Nyomtatószál hossz"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:451
 msgctxt "@label"
-msgid "Add cloud printer"
-msgstr ""
+msgid "Cost per Meter"
+msgstr "Költség / méter"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:221
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:465
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Hibaelhárítás"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Ez az anyag kapcsolódik% 1 -hez és osztja néhány tulajdonságát."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:472
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Segítsen nekünk az Ultimaker Cura fejlesztésében"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javításának érdekében, ideértve:"
+msgid "Unlink Material"
+msgstr "Alapanyag leválasztása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Géptípusok"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:485
+msgctxt "@label"
+msgid "Description"
+msgstr "Leírás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Anyagfelhasználás"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:503
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Tapadási információ"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Szeletek száma"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:642
+msgctxt "@title"
+msgid "Information"
+msgstr "Információ"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:647
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:18
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedPrintSetup.qml:82
+msgctxt "@label"
 msgid "Print settings"
 msgstr "Nyomtatási beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "Az Ultimaker Cura által gyűjtött adatok nem tartalmaznak személyes információt."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:59
+msgctxt "@label"
+msgid "Profiles compatible with active printer:"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Több információ"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:98
+msgctxt "@action:tooltip"
+msgid "Create new profile from current settings/overrides"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectSelector.qml:59
-msgctxt "@label"
-msgid "Object list"
-msgstr "Objektum lista"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:125
+msgctxt "@action:label"
+msgid "Some settings from current profile were overwritten."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:109
-msgctxt "@label"
-msgid "Is printed as support."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:140
+msgctxt "@action:button"
+msgid "Update profile."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:112
-msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:143
+msgctxt "@action:tooltip"
+msgid "Update profile with current settings/overrides"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:115
-msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:148
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:256
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "A jelenlegi változások elvetése"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:158
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Ez a profil a nyomtató által megadott alapértelmezéseket használja, tehát az alábbi listában nincs egyetlen beállítás módosítás sem."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:165
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Az Ön aktuális beállításai megegyeznek a kiválasztott profillal."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:175
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Általános beállítások"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Profil készítés"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:280
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Adjon nevet ehhez a profilhoz."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:352
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:368
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profil exportálás"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:382
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Profil másolása"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:409
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Profil átnevezés"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:422
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:429
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profil importálás"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:22
+msgctxt "@title:window"
+msgid "Rename"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:118
-msgctxt "@label"
-msgid "Overlaps with this model are not supported."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/RenameDialog.qml:23
+msgctxt "@info"
+msgid "Please provide a new name."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ObjectItemButton.qml:125
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:56
+msgctxt "@item:tooltip"
+msgid "This setting has been hidden by the active machine and will not be visible."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityItem.qml:73
+msgctxt "@item:tooltip %1 is list of setting names"
+msgid "This setting has been hidden by the value of %1. Change the value of that setting to make this setting visible."
+msgid_plural "This setting has been hidden by the values of %1. Change the values of those settings to make this setting visible."
 msgstr[0] ""
 msgstr[1] ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:13
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Láthatóság beállítása"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:55
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Mindent ellenőrizni"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:40
 msgctxt "@label"
-msgid "Connected printers"
-msgstr "Csatlakoztatott nyomtatók"
+msgid "Extruder"
+msgstr "Extruder"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:70
+msgctxt "@tooltip"
+msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
+msgstr "A nyomtatófej célhőmérséklete. A fűtőblokk hőmérséklete a beállított értékre fog melegedni, vagy éppen hűlni. Ha ez az érték 0, akkor a fejfűtés ki fog kapcsolni."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:105
+msgctxt "@tooltip"
+msgid "The current temperature of this hotend."
+msgstr "Ennek a fejnek a jelenlegi hőmérséklete."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:182
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the hotend to."
+msgstr "A nyomtatófej előmelegítési hőmérséklete."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:24
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:271
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:259
+msgctxt "@button Cancel pre-heating"
+msgid "Cancel"
+msgstr "Elvet"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:274
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:263
+msgctxt "@button"
+msgid "Pre-heat"
+msgstr "Előfűtés"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:297
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
+msgstr "A nyomtatófejet a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:335
+msgctxt "@tooltip"
+msgid "The colour of the material in this extruder."
+msgstr "Az alapanyag színe ennél az extrudernél."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:367
+msgctxt "@tooltip"
+msgid "The material in this extruder."
+msgstr "Az alapanyag ebben az extruderben."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:400
+msgctxt "@tooltip"
+msgid "The nozzle inserted in this extruder."
+msgstr "A fúvóka be van építve az extruderbe."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:25
 msgctxt "@label"
-msgid "Preset printers"
-msgstr "Előre beállított nyomtatók"
+msgid "Build plate"
+msgstr "Tárgyasztal"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:55
+msgctxt "@tooltip"
+msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
+msgstr "A fűthető ágy beállítható célhőmérséklete. Ha beállítjuk ezt az értéket a tálca elkezd erre a hőmérsékletre melegedni, vagy éppen lehűlni. Ha az érték 0 a tálcafűtés kikapcsol."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+msgctxt "@tooltip"
+msgid "The current temperature of the heated bed."
+msgstr "A fűthető ágy aktuális hőmérséklete."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:162
+msgctxt "@tooltip of temperature input"
+msgid "The temperature to pre-heat the bed to."
+msgstr "A tálca előmelegítési hőmérséklete."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:286
+msgctxt "@tooltip of pre-heat"
+msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
+msgstr "A fűthető tálcát, a nyomtatás előtt előre felmelegíti. Ez alatt az idő alatt tudod folytatni a nyomtatás beállítását, esetleg a szeletelést, s mire ezekkel a műveletekkel elkészülsz, a nyomtató már készen fog állni a nyomtatásra.Így nem kell majd várnod a gép felmelegedésére."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:51
+msgctxt "@label"
+msgid "Printer control"
+msgstr "Nyomtató vezérlés"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:66
+msgctxt "@label"
+msgid "Jog Position"
+msgstr "Léptetőgomb pozíció"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:82
+msgctxt "@label"
+msgid "X/Y"
+msgstr "X/Y"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:162
+msgctxt "@label"
+msgid "Z"
+msgstr "Z"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:217
+msgctxt "@label"
+msgid "Jog Distance"
+msgstr "Léptetőgomb távolság"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+msgctxt "@label"
+msgid "Send G-code"
+msgstr "G-kód küldés"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:319
+msgctxt "@tooltip of G-code command input"
+msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
+msgstr "Küldjön egy egyéni G-kód parancsot a csatlakoztatott nyomtatóra. A parancs elküldéséhez nyomja meg az 'enter' gombot."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+msgctxt "@info:status"
+msgid "The printer is not connected."
+msgstr "A nyomtató nincs csatlakoztatva."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
 msgctxt "@status"
 msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
 msgctxt "@status"
 msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
 msgctxt "@status"
 msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
 msgctxt "@status"
 msgid "The cloud connection is currently unavailable. Please check your internet connection."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:236
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:235
 msgctxt "@button"
 msgid "Add printer"
 msgstr "Nyomtató hozzáadása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrinterSelector/MachineSelector.qml:253
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:252
 msgctxt "@button"
 msgid "Manage printers"
 msgstr "Nyomtatók kezelése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/SearchBar.qml:17
-msgctxt "@placeholder"
-msgid "Search"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Active print"
+msgstr "Aktív nyomtatás"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Feladat név"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:172
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Nyomtatási idő"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:180
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Becsült hátralévő idő"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:46
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profil"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:145
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
 msgstr ""
+"Néhány beállított vagy felülbírált érték eltérő, a profilban tárolt értéktől. \n"
+"\n"
+"Kattints, hogy megnyisd a profil menedzsert."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/JobSpecs.qml:93
-msgctxt "@text Print job name"
-msgid "Untitled"
-msgstr "Névtelen"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:158
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:115
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Nincs nyomtatóhoz csatlakoztatva"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:20
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "A nyomtatás beállítása letiltva. A G-kód fájl nem módosítható."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "A nyomtató nem fogadja a parancsokat"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:142
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Ajánlott"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:129
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "Karbantartás alatt. Ellenőrizze a nyomtatót"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:156
+msgctxt "@button"
+msgid "Custom"
+msgstr "Egyéni"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:140
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Elveszett a kapcsolat a nyomtatóval"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Be"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:142
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Nyomtatás..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Ki"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:145
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Felfüggsztve"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:34
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Tapasztalati"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:148
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Előkészítés..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:54
+msgctxt "@info"
+msgid "custom profile is active and you overwrote some settings."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:150
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Távolítsa el a tárgyat"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:68
+msgctxt "@info"
+msgid "custom profile is overriding some settings."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:318
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/ProfileWarningReset.qml:79
+msgctxt "@info"
+msgid "Some settings were changed."
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:27
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Nyomtatás megszakítás"
+msgid "Adhesion"
+msgstr "Letapadás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/MonitorButton.qml:327
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:72
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Biztosan meg akarod szakítani a nyomtatást?"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Engedélyezze a peremet, vagy az aláúsztatást. Ez létre fog hozni a test szélén illetve az alján egy olyan részt, ami segíti a letapadást, viszont nyomtatás után ezek könnyen eltávolíthatóak a testről."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingCategory.qml:115
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:198
 msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
+msgid "Gradual infill"
+msgstr "Fokozatos kitöltés"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:236
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "A fokozatos kitöltés folyamatosan növeli a kitöltés mennyiségét, ahogy közeledik a tárgy teteje felé."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedResolutionSelector.qml:26
+msgctxt "@label"
+msgid "Resolution"
 msgstr ""
-"Egyes beállítások eltérő értéken vannak a normál, kalkulált értékektől.\n"
-"\n"
-"Kattints, hogy ezek a beállítások láthatók legyenek."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:47
-msgctxt "@label:textbox"
-msgid "Search settings"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:28
+msgctxt "@label"
+msgid "Support"
+msgstr "Támasz"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:69
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "A támasz létrehozása segíti a modell kinyúló részeinek hibátlan nyomatását. Támasz nélkül, ezek a részek összeomlanak, és nem lehetséges a hibátlan nyomtatás."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:31
+msgctxt "@error"
+msgid "Configuration not supported"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:428
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Értékek másolása minden extruderre"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:39
+msgctxt "@message:text %1 is the name the printer uses for 'nozzle'."
+msgid "No profiles are available for the selected material/%1 configuration. Please change your configuration."
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:437
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Minden változott érték másolása minden extruderre"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/UnsupportedProfileIndication.qml:47
+msgctxt "@button:label"
+msgid "Learn more"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:473
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Beállítás elrejtése"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:36
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Beállítás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:486
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Ne jelenítsd meg ezt a beállítást"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:37
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profil"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:490
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Beállítás látható marad"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:38
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Jelenlegi"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingView.qml:509
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:467
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Beállítások láthatóságának beállítása..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ProfileOverview.qml:39
+msgctxt "@title:column Unit of measurement"
+msgid "Unit"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/SearchBar.qml:17
+msgctxt "@placeholder"
+msgid "Search"
+msgstr ""
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:115
+msgctxt "@label"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Egyes beállítások eltérő értéken vannak a normál, kalkulált értékektől.\n"
+"\n"
+"Kattints, hogy ezek a beállítások láthatók legyenek."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:78
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:84
 msgctxt "@label"
 msgid "This setting is not used because all the settings that it influences are overridden."
 msgstr "Ezt a beállítást nem használjuk, mert minden ezen beállítással befolyásolt egyéb beállítás értéke felül van bírálva."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:83
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:89
 msgctxt "@label Header for list of settings."
 msgid "Affects"
 msgstr "Befolyásolások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:88
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:94
 msgctxt "@label Header for list of settings."
 msgid "Affected By"
 msgstr "Befolyásolja"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:185
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:190
 msgctxt "@label"
 msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
 msgstr "Ezt a beállítást megoszta az összes extruder között. Az itt megváltoztatott értékek az összes extrudernél meg fognak változni."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:189
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:194
 msgctxt "@label"
 msgid "This setting is resolved from conflicting extruder-specific values:"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:229
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:234
 msgctxt "@label"
 msgid ""
 "This setting has a value that is different from the profile.\n"
@@ -5617,7 +5771,7 @@ msgstr ""
 "\n"
 "Kattintson a profil értékének visszaállításához."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:334
 msgctxt "@label"
 msgid ""
 "This setting is normally calculated, but it currently has an absolute value set.\n"
@@ -5628,365 +5782,381 @@ msgstr ""
 "\n"
 "Kattintson, hogy visszaállítsuk a kalkulált értéket."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ColorDialog.qml:104
-msgctxt "@label"
-msgid "Hex"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:48
+msgctxt "@label:textbox"
+msgid "Search settings"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:156
-msgctxt "@label"
-msgid "Active print"
-msgstr "Aktív nyomtatás"
-
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Feladat név"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:395
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Értékek másolása minden extruderre"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:172
-msgctxt "@label"
-msgid "Printing Time"
-msgstr "Nyomtatási idő"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:404
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Minden változott érték másolása minden extruderre"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/PrintMonitor.qml:180
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Becsült hátralévő idő"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:440
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Beállítás elrejtése"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:81
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:453
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Ne jelenítsd meg ezt a beállítást"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:88
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Teljes képernyőre váltás"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:457
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Beállítás látható marad"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:96
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Kilépés a teljes képernyőn"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:25
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:103
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "&Visszavon"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:38
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:113
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Újra"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:51
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:131
-msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "Kilép"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:64
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:139
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3D nézet"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:77
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:146
-msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Előlnézet"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Nézet típus"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:153
-msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Felülnézet"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
+msgctxt "@label"
+msgid "Add a Cloud printer"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:160
-msgctxt "@action:inmenu menubar:view"
-msgid "Bottom View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:73
+msgctxt "@label"
+msgid "Waiting for Cloud response"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Bal oldalnézet"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:83
+msgctxt "@label"
+msgid "No printers found in your account?"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Jobb oldalnézet"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:117
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:188
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Cura beállítása..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:186
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:195
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Nyomtató hozzáadása..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:203
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:201
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Nyomtatók kezelése..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:214
+msgctxt "@label"
+msgid "Profile author"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:208
-msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Anyagok kezelése..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:226
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Nyomtató név"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:216
-msgctxt "@action:inmenu Marketplace is a brand name of Ultimaker's, so don't translate."
-msgid "Add more materials from Marketplace"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:232
+msgctxt "@text"
+msgid "Please name your printer"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:223
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "Profil &frissítése a jelenlegi beállításokkal/felülírásokkal"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
+msgctxt "@label"
+msgid "Add a printer"
+msgstr "Nyomtató hozzáadása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:231
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "&Jelenlegi változtatások eldobása"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:38
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Hálózati nyomtató hozzáadása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:243
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "Profil &létrehozása a jelenlegi beállításokkal/felülírásokkal..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:87
+msgctxt "@label"
+msgid "Add a non-networked printer"
+msgstr "Helyi nyomtató hozzáadása"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:249
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Profilok kezelése..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "A hálózaton nem található nyomtató."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:257
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Online &Dokumentumok megjelenítése"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:162
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Frissítés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Hibajelentés"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:173
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Nyomtató hozzáadása IP címmel"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:273
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Újdonságok"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:184
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:287
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Rólunk..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:220
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Hibaelhárítás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:294
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+msgctxt "@label"
+msgid "Add printer by IP address"
+msgstr "Nyomtató hozzáadása IP címmel"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:128
+msgctxt "@text"
+msgid "Enter your printer's IP address."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:304
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:150
+msgctxt "@button"
+msgid "Add"
+msgstr "Hozzáad"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:195
+msgctxt "@label"
+msgid "Could not connect to device."
+msgstr "Nem sikerült csatlakozni az eszközhöz."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:196
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:201
+msgctxt "@label"
+msgid "Can't connect to your Ultimaker printer?"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:313
-msgctxt "@action:inmenu menubar:edit"
-msgid "Multiply Selected"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:200
+msgctxt "@label"
+msgid "The printer at this address has not responded yet."
+msgstr "Az ezen a címen található nyomtató még nem válaszolt."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:231
+msgctxt "@label"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Ezt a nyomtatót nem lehet hozzáadni, mert ismeretlen a nyomtató vagy nem egy csoport tagja."
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:312
+msgctxt "@button"
+msgid "Connect"
+msgstr "Csatlakozás"
+
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:322
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Modell törlés"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:123
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:330
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "&Középső modell a platformon"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:149
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:336
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "&Csoportosítás"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:175
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:356
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Csoport bontása"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:189
+msgctxt "@button"
+msgid "Skip"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:366
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "&Modellek keverése"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:201
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:376
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Modell többszörözés..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Segítsen nekünk az Ultimaker Cura fejlesztésében"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Mindent kijelöl"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:56
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Az Ultimaker Cura névtelen adatokat gyűjt a nyomtatási minőség és a felhasználói élmény javításának érdekében, ideértve:"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:393
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Tárgyasztal törlése"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:68
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Géptípusok"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:403
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Mindent újratölt"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:74
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Anyagfelhasználás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Minden modell rendezése"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:80
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Szeletek száma"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:420
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Kijelöltek rendezése"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:86
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Nyomtatási beállítások"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Minden modellpozíció visszaállítása"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:99
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "Az Ultimaker Cura által gyűjtött adatok nem tartalmaznak személyes információt."
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Minden modelltranszformáció visszaállítása"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:100
+msgctxt "@text"
+msgid "More information"
+msgstr "Több információ"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:443
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "Fájl(ok) megnyitása..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Üres"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:453
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "Új projekt..."
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Felhasználói Szerződés"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/Actions.qml:460
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Konfigurációs mappa megjelenítése"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:67
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Elutasítás és bezárás"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:25
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Üdvözöljük az Ultimaker Cura-ban"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:38
-msgctxt "@info:tooltip"
-msgid "Front View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:67
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:51
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr ""
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:82
+msgctxt "@button"
+msgid "Get started"
+msgstr "Kezdj hozzá"
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:64
-msgctxt "@info:tooltip"
-msgid "Left View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
+msgctxt "@label"
+msgid "What's New"
 msgstr ""
 
-#: /home/remco/dev/code/ulti/trans/Cura/resources/qml/ViewOrientationControls.qml:77
-msgctxt "@info:tooltip"
-msgid "Right View"
+#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Widgets/ComboBox.qml:18
+msgctxt "@label"
+msgid "No items to select from"
 msgstr ""
 
-#: PrepareStage/plugin.json
-msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Biztosítja az előkészítés nézetet a Cura-ban."
-
-#: PrepareStage/plugin.json
-msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Előkészítés nézet"
-
-#: CuraProfileWriter/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Támogatást nyújt a Cura profilok exportálásához."
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Ellenőrzi a modelleket és a nyomtatási konfigurációt a lehetséges nyomtatási problémákra vonatkozóan, és javaslatokat ad."
 
-#: CuraProfileWriter/plugin.json
+#: ModelChecker/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura profil író"
+msgid "Model Checker"
+msgstr "Modell-ellenőrző"
 
-#: TrimeshReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading model files."
-msgstr "Támogatást nyújt a modellfájlok olvasásához."
+msgid "Provides support for reading 3MF files."
+msgstr "Támogatást nyújt a 3MF fájlok olvasásához."
 
-#: TrimeshReader/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Trimesh Reader"
-msgstr "Trimesh olvasó"
+msgid "3MF Reader"
+msgstr "3MF olvasó"
 
-#: FirmwareUpdateChecker/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Ellenőrzi a firmware frissítéseket."
+msgid "Provides support for writing 3MF files."
+msgstr "Támogatást nyújt a 3MF fájlok írásához."
 
-#: FirmwareUpdateChecker/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Frimrware frissítés ellenőrző"
+msgid "3MF Writer"
+msgstr "3MF író"
 
-#: SentryLogger/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr ""
+msgid "Provides support for reading AMF files."
+msgstr "Támogatást nyújt az AMF fájlok olvasásához."
 
-#: SentryLogger/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr ""
+msgid "AMF Reader"
+msgstr "AMF Olvasó"
 
-#: MonitorStage/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Monitor nézetet biztosít a Cura -ban."
+msgid "Backup and restore your configuration."
+msgstr "Konfiguráció biztonsági másolat készítése és visszaállítása."
 
-#: MonitorStage/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Monitor nézet"
+msgid "Cura Backups"
+msgstr "Cura biztonsági mentések"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Támogatás a cserélhető meghajtók üzem közbeni cseréjét és írását."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Biztosítja a kapcsolatot a CuraEngine szeletelő motorhoz."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Cserélhető meghajtók kimeneti beépülője"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine motor"
 
-#: AMFReader/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Támogatást nyújt az AMF fájlok olvasásához."
+msgid "Provides support for importing Cura profiles."
+msgstr "Támogatást nyújt a Cura profilok importálásához."
 
-#: AMFReader/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF Olvasó"
+msgid "Cura Profile Reader"
+msgstr "Cura profil olvasó"
 
-#: UFPReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides support for reading Ultimaker Format Packages."
-msgstr "Támogatást nyújt az Ultimaker formátumú csomagok olvasásához."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Támogatást nyújt a Cura profilok exportálásához."
 
-#: UFPReader/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "UFP Reader"
-msgstr "UFP Olvasó"
+msgid "Cura Profile Writer"
+msgstr "Cura profil író"
 
 #: DigitalLibrary/plugin.json
 msgctxt "description"
@@ -5998,15 +6168,15 @@ msgctxt "name"
 msgid "Ultimaker Digital Library"
 msgstr ""
 
-#: PerObjectSettingsTool/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "description"
-msgid "Provides the Per Model Settings."
-msgstr "Biztosítja a modellenkénti beállításokat."
+msgid "Checks for firmware updates."
+msgstr "Ellenőrzi a firmware frissítéseket."
 
-#: PerObjectSettingsTool/plugin.json
+#: FirmwareUpdateChecker/plugin.json
 msgctxt "name"
-msgid "Per Model Settings Tool"
-msgstr "Modellenkénti beállítás-eszköz"
+msgid "Firmware Update Checker"
+msgstr "Frimrware frissítés ellenőrző"
 
 #: FirmwareUpdater/plugin.json
 msgctxt "description"
@@ -6018,35 +6188,45 @@ msgctxt "name"
 msgid "Firmware Updater"
 msgstr "Firmware frissítő"
 
-#: UM3NetworkPrinting/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Kezeli a hálózati csatlakozásokat az Ultimaker hálózati nyomtatókhoz."
+msgid "Reads g-code from a compressed archive."
+msgstr "Olvassa be a g-kódot egy tömörített archívumból."
 
-#: UM3NetworkPrinting/plugin.json
+#: GCodeGzReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker hálózati kapcsolat"
+msgid "Compressed G-code Reader"
+msgstr "Tömörített G-kód olvasó"
 
-#: ModelChecker/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Ellenőrzi a modelleket és a nyomtatási konfigurációt a lehetséges nyomtatási problémákra vonatkozóan, és javaslatokat ad."
+msgid "Writes g-code to a compressed archive."
+msgstr "G-kódot ír egy tömörített archívumba."
 
-#: ModelChecker/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Modell-ellenőrző"
+msgid "Compressed G-code Writer"
+msgstr "Tömörített G-kód író"
 
-#: SimulationView/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides the preview of sliced layerdata."
-msgstr ""
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Támogatást nyújt a profilok g-kód fájlokból történő importálásához."
 
-#: SimulationView/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Szimulációs nézet"
+msgid "G-code Profile Reader"
+msgstr "G-kód profil olvasó"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Lehetővé teszi a G-kód fájlok betöltését és megjelenítését."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "G-kód olvasó"
 
 #: GCodeWriter/plugin.json
 msgctxt "description"
@@ -6058,265 +6238,275 @@ msgctxt "name"
 msgid "G-code Writer"
 msgstr "G-kódot író"
 
-#: 3MFWriter/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Támogatást nyújt a 3MF fájlok írásához."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Lehetővé teszi a nyomtatható geometria létrehozását 2D-képfájlokból."
 
-#: 3MFWriter/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF író"
+msgid "Image Reader"
+msgstr "Kép olvasó"
 
-#: GCodeGzReader/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Olvassa be a g-kódot egy tömörített archívumból."
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Támogatást nyújt a profilok importálásához a régi Cura verziókból."
 
-#: GCodeGzReader/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Tömörített G-kód olvasó"
+msgid "Legacy Cura Profile Reader"
+msgstr "Örökölt Cura profil olvasó"
 
-#: XmlMaterialProfile/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Lehetővé teszi az XML-alapú anyagprofilok olvasását és írását."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "A géoi beállítások megváltoztatásának lehetőségét biztosítja.(például a építési méret, fúvóka méret, stb.)"
 
-#: XmlMaterialProfile/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Material Profiles"
-msgstr "Alapanyag profilok"
+msgid "Machine Settings Action"
+msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: Marketplace/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Biztosítja a kapcsolatot a CuraEngine szeletelő motorhoz."
+msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgstr ""
 
-#: CuraEngineBackend/plugin.json
+#: Marketplace/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine motor"
+msgid "Marketplace"
+msgstr ""
 
-#: X3DReader/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Támogatást nyújt az X3D fájlok olvasásához."
+msgid "Provides a monitor stage in Cura."
+msgstr "Monitor nézetet biztosít a Cura -ban."
 
-#: X3DReader/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D Olvasó"
+msgid "Monitor Stage"
+msgstr "Monitor nézet"
 
-#: ImageReader/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Lehetővé teszi a nyomtatható geometria létrehozását 2D-képfájlokból."
+msgid "Provides the Per Model Settings."
+msgstr "Biztosítja a modellenkénti beállításokat."
 
-#: ImageReader/plugin.json
+#: PerObjectSettingsTool/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Kép olvasó"
+msgid "Per Model Settings Tool"
+msgstr "Modellenkénti beállítás-eszköz"
 
-#: 3MFReader/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Támogatást nyújt a 3MF fájlok olvasásához."
+msgid "Extension that allows for user created scripts for post processing"
+msgstr "Bővítmény, amely lehetővé teszi a felhasználó által létrehozott szkriptek utófeldolgozást"
 
-#: 3MFReader/plugin.json
+#: PostProcessingPlugin/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF olvasó"
+msgid "Post Processing"
+msgstr "Utólagos feldolgozás"
 
-#: UFPWriter/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Támogatást nyújt az Ultimaker formátumú csomagok írásához."
+msgid "Provides a prepare stage in Cura."
+msgstr "Biztosítja az előkészítés nézetet a Cura-ban."
 
-#: UFPWriter/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP Író"
+msgid "Prepare Stage"
+msgstr "Előkészítés nézet"
 
-#: LegacyProfileReader/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Támogatást nyújt a profilok importálásához a régi Cura verziókból."
+msgid "Provides a preview stage in Cura."
+msgstr "Előnézet biztosítása a Cura -ban."
 
-#: LegacyProfileReader/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Örökölt Cura profil olvasó"
+msgid "Preview Stage"
+msgstr "Előnézet"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: RemovableDriveOutputDevice/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Támogatás a cserélhető meghajtók üzem közbeni cseréjét és írását."
+
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Cserélhető meghajtók kimeneti beépülője"
+
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
+#: SentryLogger/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
+msgid "Sentry Logger"
 msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "A konfigurációk frissítése Cura 2.1-ről Cura 2.2-re."
+msgid "Provides the preview of sliced layerdata."
+msgstr ""
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "A 2.1-es verzió frissítése 2.2-re"
+msgid "Simulation View"
+msgstr "Szimulációs nézet"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "A konfigurációk frissítése Cura 4.1-ről Cura 4.2-re."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Névtelen szelet-információt nyújt be. A beállítások révén letiltható."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "A 4.1-es verzió frissítése 4.2-re"
+msgid "Slice info"
+msgstr "Szeletelési infó"
 
-#: VersionUpgrade/VersionUpgrade413to50/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
-msgstr ""
+msgid "Provides a normal solid mesh view."
+msgstr "Felületi háló nézetet biztosít."
 
-#: VersionUpgrade/VersionUpgrade413to50/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.13 to 5.0"
-msgstr ""
+msgid "Solid View"
+msgstr "Felület nézet"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr ""
+msgid "Creates an eraser mesh to block the printing of support in certain places"
+msgstr "Törlő hálót hoz létre, hogy bizonyos helyeken blokkolja a támasz nyomtatását"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
+#: SupportEraser/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr ""
+msgid "Support Eraser"
+msgstr "Támasz törlő"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "A konfigurációk frissítése Cura 3.3-ról Cura 3.4-re."
+msgid "Provides support for reading model files."
+msgstr "Támogatást nyújt a modellfájlok olvasásához."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: TrimeshReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "A 3.3-as verzió frissítése 3.4-re"
+msgid "Trimesh Reader"
+msgstr "Trimesh olvasó"
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: UFPReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
-msgstr ""
+msgid "Provides support for reading Ultimaker Format Packages."
+msgstr "Támogatást nyújt az Ultimaker formátumú csomagok olvasásához."
 
-#: VersionUpgrade/VersionUpgrade48to49/plugin.json
+#: UFPReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.8 to 4.9"
-msgstr ""
+msgid "UFP Reader"
+msgstr "UFP Olvasó"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "A konfigurációk frissítése Cura 2.7-ről Cura 3.0-ra."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Támogatást nyújt az Ultimaker formátumú csomagok írásához."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "A 2.7-es verzió frissítése 3.0-ra"
+msgid "UFP Writer"
+msgstr "UFP Író"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr ""
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Gépi funkciók biztosítása az Ultimaker nyomtatók számára.(pl.: ágyszintezés varázsló, frissítések kiválasztása.)"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr ""
+msgid "Ultimaker machine actions"
+msgstr "Ultimaker gépi funkciók"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "A konfigurációk frissítése Cura 3.0-ról Cura 3.1-re."
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Kezeli a hálózati csatlakozásokat az Ultimaker hálózati nyomtatókhoz."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "A 3.0-s verzió frissítése 3.1-re"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker hálózati kapcsolat"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr ""
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Elfogadja a G-kódot és elküldi őket egy nyomtatóra. A plugin a firmware-t is frissítheti."
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr ""
+msgid "USB printing"
+msgstr "USB nyomtatás"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "A konfigurációk frissítése Cura 2.6-ról Cura 2.7-re."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "A konfigurációk frissítése Cura 2.1-ről Cura 2.2-re."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "A 2.6-os verzió frissítése 2.7-re"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "A 2.1-es verzió frissítése 2.2-re"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "A konfigurációk frissítése Cura 4.2-ről Cura 4.3-ra."
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "A konfigurációk frissítése Cura 2.2-ről Cura 2.4-re."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "A 4.2-es verzió frissítése 4.3-ra"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "A 2.2-es verzió frissítése 2.4-ig"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "A konfigurációt Cura 4.0-ról Cura 4.1-re frissíti."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Frissíti a konfigurációt Cura 2.5-ről Cura 2.6-ra."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "A 4.0-s verzió frissítése 4.1-re"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "A 2.5-es verzió frissítése 2.6-ra"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr ""
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "A konfigurációk frissítése Cura 2.6-ról Cura 2.7-re."
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr ""
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "A 2.6-os verzió frissítése 2.7-re"
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
-msgstr ""
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "A konfigurációk frissítése Cura 2.7-ről Cura 3.0-ra."
 
-#: VersionUpgrade/VersionUpgrade49to410/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.9 to 4.10"
-msgstr ""
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "A 2.7-es verzió frissítése 3.0-ra"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "A konfigurációk frissítése Cura 2.2-ről Cura 2.4-re."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "A konfigurációk frissítése Cura 3.0-ról Cura 3.1-re."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "A 2.2-es verzió frissítése 2.4-ig"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "A 3.0-s verzió frissítése 3.1-re"
 
 #: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
@@ -6328,25 +6518,15 @@ msgctxt "name"
 msgid "Version Upgrade 3.2 to 3.3"
 msgstr "A 3.2-es verzió frissítése 3.3-ra"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Frissíti a konfigurációt Cura 2.5-ről Cura 2.6-ra."
-
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "A 2.5-es verzió frissítése 2.6-ra"
-
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "A konfigurációk frissítése Cura 3.5-ről Cura 4.0-ra."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "A konfigurációk frissítése Cura 3.3-ról Cura 3.4-re."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "A 3.5-es verzió frissítése 4.0-ra"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "A 3.3-as verzió frissítése 3.4-re"
 
 #: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
@@ -6358,15 +6538,25 @@ msgctxt "name"
 msgid "Version Upgrade 3.4 to 3.5"
 msgstr "A 3.4-es verzió frissítése 3.5-re"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr ""
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "A konfigurációk frissítése Cura 3.5-ről Cura 4.0-ra."
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr ""
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "A 3.5-es verzió frissítése 4.0-ra"
+
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "A konfigurációt Cura 4.0-ról Cura 4.1-re frissíti."
+
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "A 4.0-s verzió frissítése 4.1-re"
 
 #: VersionUpgrade/VersionUpgrade411to412/plugin.json
 msgctxt "description"
@@ -6378,159 +6568,157 @@ msgctxt "name"
 msgid "Version Upgrade 4.11 to 4.12"
 msgstr ""
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Konfiguráció biztonsági másolat készítése és visszaállítása."
+msgid "Upgrades configurations from Cura 4.13 to Cura 5.0."
+msgstr ""
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade413to50/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura biztonsági mentések"
+msgid "Version Upgrade 4.13 to 5.0"
+msgstr ""
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Támogatást nyújt a Cura profilok importálásához."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "A konfigurációk frissítése Cura 4.1-ről Cura 4.2-re."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura profil olvasó"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "A 4.1-es verzió frissítése 4.2-re"
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Névtelen szelet-információt nyújt be. A beállítások révén letiltható."
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "A konfigurációk frissítése Cura 4.2-ről Cura 4.3-ra."
 
-#: SliceInfoPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Szeletelési infó"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "A 4.2-es verzió frissítése 4.3-ra"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Támogatást nyújt a profilok g-kód fájlokból történő importálásához."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr ""
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-kód profil olvasó"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "G-kódot ír egy tömörített archívumba."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr ""
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Tömörített G-kód író"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr ""
 
-#: PostProcessingPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Extension that allows for user created scripts for post processing"
-msgstr "Bővítmény, amely lehetővé teszi a felhasználó által létrehozott szkriptek utófeldolgozást"
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr ""
 
-#: PostProcessingPlugin/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Post Processing"
-msgstr "Utólagos feldolgozás"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr ""
 
-#: SupportEraser/plugin.json
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "description"
-msgid "Creates an eraser mesh to block the printing of support in certain places"
-msgstr "Törlő hálót hoz létre, hogy bizonyos helyeken blokkolja a támasz nyomtatását"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr ""
 
-#: SupportEraser/plugin.json
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
 msgctxt "name"
-msgid "Support Eraser"
-msgstr "Támasz törlő"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr ""
 
-#: PreviewStage/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Előnézet biztosítása a Cura -ban."
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr ""
 
-#: PreviewStage/plugin.json
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Előnézet"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr ""
 
-#: XRayView/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Röntgen nézetet biztosít."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr ""
 
-#: XRayView/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "X-Ray View"
-msgstr "Röntgen nézet"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr ""
 
-#: UltimakerMachineActions/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Gépi funkciók biztosítása az Ultimaker nyomtatók számára.(pl.: ágyszintezés varázsló, frissítések kiválasztása.)"
+msgid "Upgrades configurations from Cura 4.8 to Cura 4.9."
+msgstr ""
 
-#: UltimakerMachineActions/plugin.json
+#: VersionUpgrade/VersionUpgrade48to49/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Ultimaker gépi funkciók"
+msgid "Version Upgrade 4.8 to 4.9"
+msgstr ""
 
-#: Marketplace/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "description"
-msgid "Manages extensions to the application and allows browsing extensions from the Ultimaker website."
+msgid "Upgrades configurations from Cura 4.9 to Cura 4.10."
 msgstr ""
 
-#: Marketplace/plugin.json
+#: VersionUpgrade/VersionUpgrade49to410/plugin.json
 msgctxt "name"
-msgid "Marketplace"
+msgid "Version Upgrade 4.9 to 4.10"
 msgstr ""
 
-#: SolidView/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Felületi háló nézetet biztosít."
+msgid "Provides support for reading X3D files."
+msgstr "Támogatást nyújt az X3D fájlok olvasásához."
 
-#: SolidView/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Felület nézet"
+msgid "X3D Reader"
+msgstr "X3D Olvasó"
 
-#: GCodeReader/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Lehetővé teszi a G-kód fájlok betöltését és megjelenítését."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Lehetővé teszi az XML-alapú anyagprofilok olvasását és írását."
 
-#: GCodeReader/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-kód olvasó"
+msgid "Material Profiles"
+msgstr "Alapanyag profilok"
 
-#: MachineSettingsAction/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "A géoi beállítások megváltoztatásának lehetőségét biztosítja.(például a építési méret, fúvóka méret, stb.)"
+msgid "Provides the X-Ray view."
+msgstr "Röntgen nézetet biztosít."
 
-#: MachineSettingsAction/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr ""
+msgid "X-Ray View"
+msgstr "Röntgen nézet"
 
-#: USBPrinting/plugin.json
-msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Elfogadja a G-kódot és elküldi őket egy nyomtatóra. A plugin a firmware-t is frissítheti."
+#~ msgctxt "@label"
+#~ msgid "Not yet initialized<br/>"
+#~ msgstr "Még nincs inicializálva<br/>"
 
-#: USBPrinting/plugin.json
-msgctxt "name"
-msgid "USB printing"
-msgstr "USB nyomtatás"
+#~ msgctxt "@label"
+#~ msgid "SVG icons"
+#~ msgstr "SVG ikonok"
 
-#~ msgctxt "@title:window"
-#~ msgid "Plugin License Agreement"
-#~ msgstr "Kiegészítő licencszerződés"
+#~ msgctxt "@tooltip"
+#~ msgid "You have modified some profile settings. If you want to change these go to custom mode."
+#~ msgstr "Megváltoztattál néhány profilbeállítást. Ha ezeket szeretnéd folyamatosan megtartani, akkor válaszd az 'Egyéni mód' -ot."
 
 #~ msgctxt "@title:window"
 #~ msgid "Convert Image..."
diff --git a/resources/i18n/hu_HU/fdmextruder.def.json.po b/resources/i18n/hu_HU/fdmextruder.def.json.po
index ce764cd92d..7c07beb2fa 100644
--- a/resources/i18n/hu_HU/fdmextruder.def.json.po
+++ b/resources/i18n/hu_HU/fdmextruder.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2022-04-13 10:49+0000\n"
+"POT-Creation-Date: 2022-06-21 12:50+0000\n"
 "PO-Revision-Date: 2020-03-24 09:27+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: AT-VLOG\n"
diff --git a/resources/i18n/hu_HU/fdmprinter.def.json.po b/resources/i18n/hu_HU/fdmprinter.def.json.po
index f7c1c2d793..2f10357d18 100644
--- a/resources/i18n/hu_HU/fdmprinter.def.json.po
+++ b/resources/i18n/hu_HU/fdmprinter.def.json.po
@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura 4.13\n"
 "Report-Msgid-Bugs-To: plugins@ultimaker.com\n"
-"POT-Creation-Date: 2022-04-13 10:49+0000\n"
+"POT-Creation-Date: 2022-06-21 12:50+0000\n"
 "PO-Revision-Date: 2020-03-24 09:43+0100\n"
 "Last-Translator: Nagy Attila <vokroot@gmail.com>\n"
 "Language-Team: AT-VLOG\n"
@@ -2810,6 +2810,16 @@ msgid "Enables adjusting the print head acceleration. Increasing the acceleratio
 msgstr "A nyomtatófej mozgási gyorsulás szabályzás engedélyezése. Ha növeljük a gyorsulást, csökken a nyomtatási idő, viszont a nyomtatás minősége is."
 
 #: fdmprinter.def.json
+msgctxt "acceleration_travel_enabled label"
+msgid "Enable Travel Acceleration"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "acceleration_travel_enabled description"
+msgid "Use a separate acceleration rate for travel moves. If disabled, travel moves will use the acceleration value of the printed line at their destination."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "acceleration_print label"
 msgid "Print Acceleration"
 msgstr "Nyomtatási gyorsulás"
@@ -3000,6 +3010,16 @@ msgid "Enables adjusting the jerk of print head when the velocity in the X or Y
 msgstr "Engedéylezi a nyomtatófej X és Y tengelyen való löketének (sebesség) változásának vezérlését. Ha a löketet növeljük, az csökkenti a nyomtatási időt a minőség terhére."
 
 #: fdmprinter.def.json
+msgctxt "jerk_travel_enabled label"
+msgid "Enable Travel Jerk"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "jerk_travel_enabled description"
+msgid "Use a separate jerk rate for travel moves. If disabled, travel moves will use the jerk value of the printed line at their destination."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "jerk_print label"
 msgid "Print Jerk"
 msgstr "Nyomtatás löket"