Translations for 4.9

CURA-8153
author: jelle Spijker <j.spijker@ultimaker.com> 2021-04-02 17:34:06 +0300
committer: Jelle Spijker <spijker.jelle@gmail.com> 2021-04-02 17:34:06 +0300
commit: 33c33c267d5dfb3b4e87daa4e959ceba3a84dfcf (patch)
tree: ad6929a84ee04729c8bd959fa30a046b51a06558 /resources/i18n/nl_NL
parent: 2a4d421e4b58dbc63e4ddcfd4dbd177ab93101e0 (diff)
3 files changed, 4256 insertions, 3915 deletions
diff --git a/resources/i18n/nl_NL/cura.po b/resources/i18n/nl_NL/cura.po
index d74aef776a..0c292f2dd4 100644
--- a/resources/i18n/nl_NL/cura.po
+++ b/resources/i18n/nl_NL/cura.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0200\n"
+"POT-Creation-Date: 2021-04-02 16:10+0200\n"
 "PO-Revision-Date: 2020-11-09 14:10+0100\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Dutch <info@lionbridge.com>, Dutch <info@bothof.nl>\n"
@@ -17,155 +17,188 @@ msgstr ""
 "Plural-Forms: nplurals=2; plural=(n != 1);\n"
 "X-Generator: Poedit 2.4.1\n"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:110 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:361 /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1581
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
-msgctxt "@label"
-msgid "Unknown"
-msgstr "Onbekend"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:523
+msgctxt "@info:progress"
+msgid "Loading machines..."
+msgstr "Machines laden..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
-msgctxt "@label"
-msgid "The printer(s) below cannot be connected because they are part of a group"
-msgstr "Kan de onderstaande printer(s) niet verbinden omdat deze deel uitmaakt/uitmaken van een groep"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:530
+msgctxt "@info:progress"
+msgid "Setting up preferences..."
+msgstr "Voorkeuren instellen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
-msgctxt "@label"
-msgid "Available networked printers"
-msgstr "Beschikbare netwerkprinters"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:668
+msgctxt "@info:progress"
+msgid "Initializing Active Machine..."
+msgstr "Actieve machine initialiseren ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/ExtrudersModel.py:211
-msgctxt "@menuitem"
-msgid "Not overridden"
-msgstr "Niet overschreven"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:799
+msgctxt "@info:progress"
+msgid "Initializing machine manager..."
+msgstr "Machinebeheer initialiseren ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/GlobalStacksModel.py:76
-#, python-brace-format
-msgctxt "@label {0} is the name of a printer that's about to be deleted."
-msgid "Are you sure you wish to remove {0}? This cannot be undone!"
-msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:813
+msgctxt "@info:progress"
+msgid "Initializing build volume..."
+msgstr "Werkvolume initialiseren ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:42 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:11 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:338
-msgctxt "@label"
-msgid "Default"
-msgstr "Default"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:884
+msgctxt "@info:progress"
+msgid "Setting up scene..."
+msgstr "Scene instellen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:45 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:14
-msgctxt "@label"
-msgid "Visual"
-msgstr "Visueel"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:920
+msgctxt "@info:progress"
+msgid "Loading interface..."
+msgstr "Interface laden..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:46 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:15
-msgctxt "@text"
-msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
-msgstr "Het visuele profiel is ontworpen om visuele prototypen en modellen te printen met als doel een hoge visuele en oppervlaktekwaliteit te creëren."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:925
+msgctxt "@info:progress"
+msgid "Initializing engine..."
+msgstr "Engine initialiseren ..."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:49 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:18
-msgctxt "@label"
-msgid "Engineering"
-msgstr "Engineering"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1242
+#, python-format
+msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
+msgid "%(width).1f x %(depth).1f x %(height).1f mm"
+msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:50 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:19
-msgctxt "@text"
-msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
-msgstr "Het engineeringprofiel is ontworpen om functionele prototypen en onderdelen voor eindgebruik te printen met als doel een grotere precisie en nauwere toleranties."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1799
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
+msgstr "Er kan slechts één G-code-bestand tegelijkertijd worden geladen. Het importeren van {0} is overgeslagen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:53 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:22
-msgctxt "@label"
-msgid "Draft"
-msgstr "Ontwerp"
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1800
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+msgctxt "@info:title"
+msgid "Warning"
+msgstr "Waarschuwing"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentCategoryModel.py:54 /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/IntentTranslations.py:23
-msgctxt "@text"
-msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
-msgstr "Het ontwerpprofiel is ontworpen om initiële prototypen en conceptvalidatie te printen met als doel de printtijd aanzienlijk te verkorten."
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1809
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
+msgstr "Kan geen ander bestand openen als G-code wordt geladen. Het importeren van {0} is overgeslagen"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/CuraApplication.py:1810
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:146
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
+msgctxt "@info:title"
+msgid "Error"
+msgstr "Fout"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:226
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/GlobalStacksModel.py:76
+#, python-brace-format
+msgctxt "@label {0} is the name of a printer that's about to be deleted."
+msgid "Are you sure you wish to remove {0}? This cannot be undone!"
+msgstr "Weet u zeker dat u {0} wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:226
 msgctxt "@label"
 msgid "Custom Material"
 msgstr "Aangepast materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/MaterialManagementModel.py:227 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/MaterialManagementModel.py:227
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:205
 msgctxt "@label"
 msgid "Custom"
 msgstr "Aangepast"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:383
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:11
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:42
+msgctxt "@label"
+msgid "Default"
+msgstr "Default"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:361
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:110
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1612
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:130
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:171
+msgctxt "@label"
+msgid "Unknown"
+msgstr "Onbekend"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:383
 msgctxt "@label"
 msgid "Custom profiles"
 msgstr "Aangepaste profielen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:418
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:418
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "All Supported Types ({0})"
 msgstr "Alle Ondersteunde Typen ({0})"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Machines/Models/QualityManagementModel.py:419
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/QualityManagementModel.py:419
 msgctxt "@item:inlistbox"
 msgid "All Files (*)"
 msgstr "Alle Bestanden (*)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/API/Account.py:178
-msgctxt "@info:title"
-msgid "Login failed"
-msgstr "Inloggen mislukt"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:24
-msgctxt "@info:status"
-msgid "Finding new location for objects"
-msgstr "Nieuwe locatie vinden voor objecten"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Finding Location"
-msgstr "Locatie vinden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:14
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:45
+msgctxt "@label"
+msgid "Visual"
+msgstr "Visueel"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:41 /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:76
-msgctxt "@info:status"
-msgid "Unable to find a location within the build volume for all objects"
-msgstr "Kan binnen het werkvolume niet voor alle objecten een locatie vinden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:15
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:46
+msgctxt "@text"
+msgid "The visual profile is designed to print visual prototypes and models with the intent of high visual and surface quality."
+msgstr "Het visuele profiel is ontworpen om visuele prototypen en modellen te printen met als doel een hoge visuele en oppervlaktekwaliteit te creëren."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151 /home/trin/Gedeeld/Projects/Cura/cura/Arranging/ArrangeObjectsJob.py:42
-msgctxt "@info:title"
-msgid "Can't Find Location"
-msgstr "Kan locatie niet vinden"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:18
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:49
+msgctxt "@label"
+msgid "Engineering"
+msgstr "Engineering"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:104
-msgctxt "@info:backup_failed"
-msgid "Could not create archive from user data directory: {}"
-msgstr "Kan geen archief maken van gegevensmap van gebruiker: {}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:19
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:50
+msgctxt "@text"
+msgid "The engineering profile is designed to print functional prototypes and end-use parts with the intent of better accuracy and for closer tolerances."
+msgstr "Het engineeringprofiel is ontworpen om functionele prototypen en onderdelen voor eindgebruik te printen met als doel een grotere precisie en nauwere toleranties."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:110 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
-msgctxt "@info:title"
-msgid "Backup"
-msgstr "Back-up"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:22
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:53
+msgctxt "@label"
+msgid "Draft"
+msgstr "Ontwerp"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:123
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup without having proper data or meta data."
-msgstr "Geprobeerd een Cura-back-up te herstellen zonder correcte gegevens of metadata."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentTranslations.py:23
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/IntentCategoryModel.py:54
+msgctxt "@text"
+msgid "The draft profile is designed to print initial prototypes and concept validation with the intent of significant print time reduction."
+msgstr "Het ontwerpprofiel is ontworpen om initiële prototypen en conceptvalidatie te printen met als doel de printtijd aanzienlijk te verkorten."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Backups/Backup.py:134
-msgctxt "@info:backup_failed"
-msgid "Tried to restore a Cura backup that is higher than the current version."
-msgstr "Geprobeerd een Cura-back-up te herstellen van een versie die hoger is dan de huidige versie."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:113
+msgctxt "@label"
+msgid "The printer(s) below cannot be connected because they are part of a group"
+msgstr "Kan de onderstaande printer(s) niet verbinden omdat deze deel uitmaakt/uitmaken van een groep"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:98
-msgctxt "@info:status"
-msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
-msgstr "De hoogte van het bouwvolume is verminderd wegens de waarde van de instelling “Printvolgorde”, om te voorkomen dat de rijbrug tegen geprinte modellen botst."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/DiscoveredPrintersModel.py:115
+msgctxt "@label"
+msgid "Available networked printers"
+msgstr "Beschikbare netwerkprinters"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/BuildVolume.py:100
-msgctxt "@info:title"
-msgid "Build Volume"
-msgstr "Werkvolume"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Machines/Models/ExtrudersModel.py:211
+msgctxt "@menuitem"
+msgid "Not overridden"
+msgstr "Niet overschreven"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:107
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:107
 msgctxt "@title:window"
 msgid "Cura can't start"
 msgstr "Cura kan niet worden gestart"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:113
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:113
 msgctxt "@label crash message"
 msgid ""
 "<p><b>Oops, Ultimaker Cura has encountered something that doesn't seem right.</p></b>\n"
@@ -180,32 +213,32 @@ msgstr ""
 "                    <p>Stuur ons dit crashrapport om het probleem op te lossen.</p>\n"
 "                "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:122
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:122
 msgctxt "@action:button"
 msgid "Send crash report to Ultimaker"
 msgstr "Het crashrapport naar Ultimaker verzenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:125
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:125
 msgctxt "@action:button"
 msgid "Show detailed crash report"
 msgstr "Gedetailleerd crashrapport weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:129
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:129
 msgctxt "@action:button"
 msgid "Show configuration folder"
 msgstr "Open Configuratiemap"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:140
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:140
 msgctxt "@action:button"
 msgid "Backup and Reset Configuration"
 msgstr "Back-up maken en herstellen van configuratie"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:171
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:171
 msgctxt "@title:window"
 msgid "Crash Report"
 msgstr "Crashrapport"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:190
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:190
 msgctxt "@label crash message"
 msgid ""
 "<p><b>A fatal error has occurred in Cura. Please send us this Crash Report to fix the problem</p></b>\n"
@@ -216,1078 +249,780 @@ msgstr ""
 "            <p>Druk op de knop \"Rapport verzenden\" om het foutenrapport automatisch naar onze servers te verzenden</p>\n"
 "        "
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:198
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:198
 msgctxt "@title:groupbox"
 msgid "System information"
 msgstr "Systeeminformatie"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:207
 msgctxt "@label unknown version of Cura"
 msgid "Unknown"
 msgstr "Onbekend"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:228
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:228
 msgctxt "@label Cura version number"
 msgid "Cura version"
 msgstr "Cura-versie"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:229
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:229
 msgctxt "@label"
 msgid "Cura language"
 msgstr "Taal van Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:230
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:230
 msgctxt "@label"
 msgid "OS language"
 msgstr "Taal van besturingssysteem"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:231
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:231
 msgctxt "@label Type of platform"
 msgid "Platform"
 msgstr "Platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:232
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:232
 msgctxt "@label"
 msgid "Qt version"
 msgstr "Qt version"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:233
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:233
 msgctxt "@label"
 msgid "PyQt version"
 msgstr "PyQt version"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:234
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:234
 msgctxt "@label OpenGL version"
 msgid "OpenGL"
 msgstr "OpenGL"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:264
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:264
 msgctxt "@label"
 msgid "Not yet initialized<br/>"
 msgstr "Nog niet geïnitialiseerd<br/>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:267
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:267
 #, python-brace-format
 msgctxt "@label OpenGL version"
 msgid "<li>OpenGL Version: {version}</li>"
 msgstr "<li>OpenGL-versie: {version}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:268
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:268
 #, python-brace-format
 msgctxt "@label OpenGL vendor"
 msgid "<li>OpenGL Vendor: {vendor}</li>"
 msgstr "<li>OpenGL-leverancier: {vendor}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:269
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:269
 #, python-brace-format
 msgctxt "@label OpenGL renderer"
 msgid "<li>OpenGL Renderer: {renderer}</li>"
 msgstr "<li>OpenGL-renderer: {renderer}</li>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:303
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:303
 msgctxt "@title:groupbox"
 msgid "Error traceback"
 msgstr "Traceback van fout"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:389
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:389
 msgctxt "@title:groupbox"
 msgid "Logs"
 msgstr "Logboeken"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CrashHandler.py:417
+#: /mnt/projects/ultimaker/cura/Cura/cura/CrashHandler.py:417
 msgctxt "@action:button"
 msgid "Send report"
 msgstr "Rapport verzenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:521
-msgctxt "@info:progress"
-msgid "Loading machines..."
-msgstr "Machines laden..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:528
-msgctxt "@info:progress"
-msgid "Setting up preferences..."
-msgstr "Voorkeuren instellen..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:657
-msgctxt "@info:progress"
-msgid "Initializing Active Machine..."
-msgstr "Actieve machine initialiseren ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:788
-msgctxt "@info:progress"
-msgid "Initializing machine manager..."
-msgstr "Machinebeheer initialiseren ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:802
-msgctxt "@info:progress"
-msgid "Initializing build volume..."
-msgstr "Werkvolume initialiseren ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:870
-msgctxt "@info:progress"
-msgid "Setting up scene..."
-msgstr "Scene instellen..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:906
-msgctxt "@info:progress"
-msgid "Loading interface..."
-msgstr "Interface laden..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:911
-msgctxt "@info:progress"
-msgid "Initializing engine..."
-msgstr "Engine initialiseren ..."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1221
-#, python-format
-msgctxt "@info 'width', 'depth' and 'height' are variable names that must NOT be translated; just translate the format of ##x##x## mm."
-msgid "%(width).1f x %(depth).1f x %(height).1f mm"
-msgstr "%(width).1f x %(depth).1f x %(height).1f mm"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1777
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Only one G-code file can be loaded at a time. Skipped importing {0}"
-msgstr "Er kan slechts één G-code-bestand tegelijkertijd worden geladen. Het importeren van {0} is overgeslagen"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1778 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:188 /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/cura/API/Account.py:179
 msgctxt "@info:title"
-msgid "Warning"
-msgstr "Waarschuwing"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1787
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Can't open any other file if G-code is loading. Skipped importing {0}"
-msgstr "Kan geen ander bestand openen als G-code wordt geladen. Het importeren van {0} is overgeslagen"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/CuraApplication.py:1788 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:146 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:153 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:139
-msgctxt "@info:title"
-msgid "Error"
-msgstr "Fout"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:26
-msgctxt "@info:status"
-msgid "Multiplying and placing objects"
-msgstr "Objecten verveelvoudigen en plaatsen"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:28
-msgctxt "@info:title"
-msgid "Placing Objects"
-msgstr "Objecten plaatsen"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/MultiplyObjectsJob.py:77
-msgctxt "@info:title"
-msgid "Placing Object"
-msgstr "Object plaatsen"
+msgid "Login failed"
+msgstr "Inloggen mislukt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationHelpers.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationHelpers.py:92
 msgctxt "@message"
 msgid "Could not read response."
 msgstr "Kan het antwoord niet lezen."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:187
+msgctxt "@info"
+msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
+msgstr "Er kan geen nieuw aanmeldingsproces worden gestart. Controleer of een andere aanmeldingspoging nog actief is."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationService.py:242
+msgctxt "@info"
+msgid "Unable to reach the Ultimaker account server."
+msgstr "Kan de Ultimaker-accountserver niet bereiken."
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:74
 msgctxt "@message"
 msgid "The provided state is not correct."
 msgstr "De opgegeven status is niet juist."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:85
 msgctxt "@message"
 msgid "Please give the required permissions when authorizing this application."
 msgstr "Verleen de vereiste toestemmingen toe bij het autoriseren van deze toepassing."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/OAuth2/AuthorizationRequestHandler.py:92
 msgctxt "@message"
 msgid "Something unexpected happened when trying to log in, please try again."
 msgstr "Er heeft een onverwachte gebeurtenis plaatsgevonden bij het aanmelden. Probeer het opnieuw."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:187
-msgctxt "@info"
-msgid "Unable to start a new sign in process. Check if another sign in attempt is still active."
-msgstr "Er kan geen nieuw aanmeldingsproces worden gestart. Controleer of een andere aanmeldingspoging nog actief is."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/OAuth2/AuthorizationService.py:242
-msgctxt "@info"
-msgid "Unable to reach the Ultimaker account server."
-msgstr "Kan de Ultimaker-accountserver niet bereiken."
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:205 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:132
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:205
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:132
 msgctxt "@title:window"
 msgid "File Already Exists"
 msgstr "Het Bestand Bestaat Al"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:206 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:133
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:206
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:133
 #, python-brace-format
 msgctxt "@label Don't translate the XML tag <filename>!"
 msgid "The file <filename>{0}</filename> already exists. Are you sure you want to overwrite it?"
 msgstr "Het bestand <filename>{0}</filename> bestaat al. Weet u zeker dat u dit bestand wilt overschrijven?"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:452 /home/trin/Gedeeld/Projects/Cura/cura/Settings/ContainerManager.py:455
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:456
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/ContainerManager.py:459
 msgctxt "@info:status"
 msgid "Invalid file URL:"
 msgstr "Ongeldige bestands-URL:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:144
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:713
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
+msgctxt "@label"
+msgid "Nozzle"
+msgstr "Nozzle"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:856
+msgctxt "@info:message Followed by a list of settings."
+msgid "Settings have been changed to match the current availability of extruders:"
+msgstr "De instellingen zijn gewijzigd zodat deze overeenkomen met de huidige beschikbaarheid van extruders:"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:858
+msgctxt "@info:title"
+msgid "Settings updated"
+msgstr "De instellingen zijn bijgewerkt"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/MachineManager.py:1478
+msgctxt "@info:title"
+msgid "Extruder(s) Disabled"
+msgstr "Extruder(s) uitgeschakeld"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:144
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Failed to export profile to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Kan het profiel niet exporteren als <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:151
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to export profile to <filename>{0}</filename>: Writer plugin reported failure."
 msgstr "Kan het profiel niet exporteren als <filename>{0}</filename>: Invoegtoepassing voor de schrijver heeft een fout gerapporteerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:156
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:156
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Exported profile to <filename>{0}</filename>"
 msgstr "Het profiel is geëxporteerd als <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:157
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:157
 msgctxt "@info:title"
 msgid "Export succeeded"
 msgstr "De export is voltooid"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:188
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:188
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>: {1}"
 msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:192
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:192
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Can't import profile from <filename>{0}</filename> before a printer is added."
 msgstr "Kan het profiel niet importeren uit <filename>{0}</filename> voordat een printer toegevoegd is."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:207
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:207
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "No custom profile to import in file <filename>{0}</filename>"
 msgstr "Er is geen aangepast profiel om in het bestand <filename>{0}</filename> te importeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:211
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:211
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:235 /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:245
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:235
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:245
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename>!"
 msgid "This profile <filename>{0}</filename> contains incorrect data, could not import it."
 msgstr "Dit profiel <filename>{0}</filename> bevat incorrecte gegevens. Kan het profiel niet importeren."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:338
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:338
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tag <filename>!"
 msgid "Failed to import profile from <filename>{0}</filename>:"
 msgstr "Kan het profiel niet importeren uit <filename>{0}</filename>:"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:342
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:342
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Successfully imported profile {0}."
 msgstr "Het profiel {0} is geïmporteerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:349
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:349
 #, python-brace-format
 msgctxt "@info:status"
 msgid "File {0} does not contain any valid profile."
 msgstr "Het bestand {0} bevat geen geldig profiel."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:352
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:352
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Profile {0} has an unknown file type or is corrupted."
 msgstr "Het profiel {0} heeft een onbekend bestandstype of is beschadigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:423
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:426
 msgctxt "@label"
 msgid "Custom profile"
 msgstr "Aangepast profiel"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:439
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:442
 msgctxt "@info:status"
 msgid "Profile is missing a quality type."
 msgstr "Er ontbreekt een kwaliteitstype in het profiel."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:443
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:446
 msgctxt "@info:status"
-msgid "Global stack is missing."
-msgstr "Algemene stapel ontbreekt."
+msgid "There is no active printer yet."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:449
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:452
 msgctxt "@info:status"
 msgid "Unable to add the profile."
 msgstr "Kan het profiel niet toevoegen."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:463
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:466
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Quality type '{0}' is not compatible with the current active machine definition '{1}'."
 msgstr "Kwaliteitstype '{0}' is niet compatibel met de huidige actieve machinedefinitie '{1}'."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/CuraContainerRegistry.py:468
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/CuraContainerRegistry.py:471
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Warning: The profile is not visible because its quality type '{0}' is not available for the current configuration. Switch to a material/nozzle combination that can use this quality type."
 msgstr "Waarschuwing: het profiel is niet zichtbaar omdat het kwaliteitstype '{0}' van het profiel niet beschikbaar is voor de huidige configuratie. Schakel naar een materiaal-nozzle-combinatie waarvoor dit kwaliteitstype geschikt is."
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:36
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:36
 msgctxt "@info:not supported profile"
 msgid "Not supported"
 msgstr "Niet ondersteund"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/cura_empty_instance_containers.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/Settings/cura_empty_instance_containers.py:55
 msgctxt "@info:No intent profile selected"
 msgid "Default"
 msgstr "Default"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:712 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:216
-msgctxt "@label"
-msgid "Nozzle"
-msgstr "Nozzle"
-
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:860
-msgctxt "@info:message Followed by a list of settings."
-msgid "Settings have been changed to match the current availability of extruders:"
-msgstr "De instellingen zijn gewijzigd zodat deze overeenkomen met de huidige beschikbaarheid van extruders:"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:67
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:24
+msgctxt "@info:status"
+msgid "Finding new location for objects"
+msgstr "Nieuwe locatie vinden voor objecten"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:862
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:71
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Settings updated"
-msgstr "De instellingen zijn bijgewerkt"
+msgid "Finding Location"
+msgstr "Locatie vinden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/Settings/MachineManager.py:1447
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:150
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:41
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:76
+msgctxt "@info:status"
+msgid "Unable to find a location within the build volume for all objects"
+msgstr "Kan binnen het werkvolume niet voor alle objecten een locatie vinden"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsAllBuildPlatesJob.py:151
+#: /mnt/projects/ultimaker/cura/Cura/cura/Arranging/ArrangeObjectsJob.py:42
 msgctxt "@info:title"
-msgid "Extruder(s) Disabled"
-msgstr "Extruder(s) uitgeschakeld"
+msgid "Can't Find Location"
+msgstr "Kan locatie niet vinden"
+
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/ObjectsModel.py:69
+#, python-brace-format
+msgctxt "@label"
+msgid "Group #{group_nr}"
+msgstr "Groepsnummer {group_nr}"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:48
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:55
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:268
 msgctxt "@action:button"
-msgid "Add"
-msgstr "Toevoegen"
+msgid "Skip"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:26 /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:263
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WhatsNewPagesModel.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:174
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:127
 msgctxt "@action:button"
-msgid "Finish"
-msgstr "Voltooien"
+msgid "Close"
+msgstr "Sluiten"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/AddPrinterPagesModel.py:33 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:441 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:234 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:87
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:259
 msgctxt "@action:button"
-msgid "Cancel"
-msgstr "Annuleren"
+msgid "Next"
+msgstr "Volgende"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/ObjectsModel.py:69
-#, python-brace-format
-msgctxt "@label"
-msgid "Group #{group_nr}"
-msgstr "Groepsnummer {group_nr}"
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/WelcomePagesModel.py:272
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:26
+msgctxt "@action:button"
+msgid "Finish"
+msgstr "Voltooien"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:83
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:82
 msgctxt "@tooltip"
 msgid "Outer Wall"
 msgstr "Buitenwand"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:84
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:83
 msgctxt "@tooltip"
 msgid "Inner Walls"
 msgstr "Binnenwanden"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:85
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:84
 msgctxt "@tooltip"
 msgid "Skin"
 msgstr "Skin"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:86
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:85
 msgctxt "@tooltip"
 msgid "Infill"
 msgstr "Vulling"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:87
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:86
 msgctxt "@tooltip"
 msgid "Support Infill"
 msgstr "Supportvulling"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:88
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:87
 msgctxt "@tooltip"
 msgid "Support Interface"
 msgstr "Verbindingsstructuur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:89
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:88
 msgctxt "@tooltip"
 msgid "Support"
 msgstr "Supportstructuur"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:90
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:89
 msgctxt "@tooltip"
 msgid "Skirt"
 msgstr "Skirt"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:91
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:90
 msgctxt "@tooltip"
 msgid "Prime Tower"
 msgstr "Primepijler"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:92
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:91
 msgctxt "@tooltip"
 msgid "Travel"
 msgstr "Beweging"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:93
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:92
 msgctxt "@tooltip"
 msgid "Retractions"
 msgstr "Intrekkingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/PrintInformation.py:94
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/PrintInformation.py:93
 msgctxt "@tooltip"
 msgid "Other"
 msgstr "Overig(e)"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WelcomePagesModel.py:56
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:48
 msgctxt "@action:button"
-msgid "Next"
-msgstr "Volgende"
+msgid "Add"
+msgstr "Toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/cura/UI/WhatsNewPagesModel.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:185 /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:128 /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:482
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:173 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:127
+#: /mnt/projects/ultimaker/cura/Cura/cura/UI/AddPrinterPagesModel.py:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:81
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:234
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:292
 msgctxt "@action:button"
-msgid "Close"
-msgstr "Sluiten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:31
-msgctxt "@info:title"
-msgid "3D Model Assistant"
-msgstr "3D-modelassistent"
+msgid "Cancel"
+msgstr "Annuleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.py:96
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:98
 msgctxt "@info:status"
-msgid ""
-"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
-"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
-msgstr ""
-"<p>Een of meer 3D-modellen worden mogelijk niet optimaal geprint vanwege het modelformaat en de materiaalconfiguratie:</p>\n"
-"<p>{model_names}</p>\n"
-"<p>Ontdek hoe u de best mogelijke printkwaliteit en betrouwbaarheid verkrijgt.</p>\n"
-"<p><a href=”https://ultimaker.com/3D-model-assistant”>Handleiding printkwaliteit bekijken</a></p>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
-#, python-brace-format
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
-msgstr "Projectbestand <filename>{0}</filename> bevat een onbekend type machine <message>{1}</message>. Kan de machine niet importeren. In plaats daarvan worden er modellen geïmporteerd."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
-msgctxt "@info:title"
-msgid "Open Project File"
-msgstr "Projectbestand Openen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
-msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
-msgstr "Projectbestand <filename>{0}</filename> is plotseling ontoegankelijk: <message>{1}</message>."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
-msgctxt "@info:title"
-msgid "Can't Open Project File"
-msgstr "Kan projectbestand niet openen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:686
-#, python-brace-format
-msgctxt "@info:error Don't translate the XML tag <filename>!"
-msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
-msgstr "Projectbestand <filename>{0}</filename> wordt gemaakt met behulp van profielen die onbekend zijn bij deze versie van Ultimaker Cura."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:203
-msgctxt "@title:tab"
-msgid "Recommended"
-msgstr "Aanbevolen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.py:205
-msgctxt "@title:tab"
-msgid "Custom"
-msgstr "Aangepast"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:27 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/__init__.py:33
-msgctxt "@item:inlistbox"
-msgid "3MF File"
-msgstr "3MF-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
-msgctxt "@error:zip"
-msgid "3MF Writer plug-in is corrupt."
-msgstr "3MF-schrijverplug-in is beschadigd."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59 /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
-msgctxt "@error:zip"
-msgid "No permission to write the workspace here."
-msgstr "Geen bevoegdheid om de werkruimte hier te schrijven."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
-msgctxt "@error:zip"
-msgid "The operating system does not allow saving a project file to this location or with this file name."
-msgstr "Het besturingssysteem staat niet toe dat u een projectbestand opslaat op deze locatie of met deze bestandsnaam."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/ThreeMFWriter.py:185
-msgctxt "@error:zip"
-msgid "Error writing 3mf file."
-msgstr "Fout bij het schrijven van het 3mf-bestand."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "3MF file"
-msgstr "3MF-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFWriter/__init__.py:34
-msgctxt "@item:inlistbox"
-msgid "Cura Project 3MF file"
-msgstr "Cura-project 3MF-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/AMFReader/__init__.py:15
-msgctxt "@item:inlistbox"
-msgid "AMF File"
-msgstr "AMF-bestand"
+msgid "The build volume height has been reduced due to the value of the \"Print Sequence\" setting to prevent the gantry from colliding with printed models."
+msgstr "De hoogte van het bouwvolume is verminderd wegens de waarde van de instelling “Printvolgorde”, om te voorkomen dat de rijbrug tegen geprinte modellen botst."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+#: /mnt/projects/ultimaker/cura/Cura/cura/BuildVolume.py:100
 msgctxt "@info:title"
-msgid "Backups"
-msgstr "Back-ups"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
-msgctxt "@info:backup_status"
-msgid "There was an error while uploading your backup."
-msgstr "Er is een fout opgetreden tijdens het uploaden van uw back-up."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
-msgctxt "@info:backup_status"
-msgid "Creating your backup..."
-msgstr "Uw back-up maken..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
-msgctxt "@info:backup_status"
-msgid "There was an error while creating your backup."
-msgstr "Er is een fout opgetreden bij het maken van de back-up."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
-msgctxt "@info:backup_status"
-msgid "Uploading your backup..."
-msgstr "Uw back-up wordt geüpload..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
-msgctxt "@info:backup_status"
-msgid "Your backup has finished uploading."
-msgstr "Uw back-up is geüpload."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
-msgctxt "@error:file_size"
-msgid "The backup exceeds the maximum file size."
-msgstr "De back-up is groter dan de maximale bestandsgrootte."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DriveApiService.py:82 /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
-msgctxt "@info:backup_status"
-msgid "There was an error trying to restore your backup."
-msgstr "Er is een fout opgetreden tijdens het herstellen van uw back-up."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
-msgctxt "@item:inmenu"
-msgid "Manage backups"
-msgstr "Back-ups beheren"
+msgid "Build Volume"
+msgstr "Werkvolume"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356
-msgctxt "@info:status"
-msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
-msgstr "Met het huidige materiaal is slicen niet mogelijk, omdat het materiaal niet compatibel is met de geselecteerde machine of configuratie."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:113
+msgctxt "@info:backup_failed"
+msgid "Could not create archive from user data directory: {}"
+msgstr "Kan geen archief maken van gegevensmap van gebruiker: {}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:356 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:387 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:411 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:420
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:429 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:441
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:107
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:113
 msgctxt "@info:title"
-msgid "Unable to slice"
-msgstr "Kan niet slicen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:386
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice with the current settings. The following settings have errors: {0}"
-msgstr "Met de huidige instellingen is slicing niet mogelijk. De volgende instellingen bevatten fouten: {0}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:410
-#, python-brace-format
-msgctxt "@info:status"
-msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
-msgstr "Slicing is niet mogelijk vanwege enkele instellingen per model. De volgende instellingen bevatten fouten voor een of meer modellen: {error_labels}"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:419
-msgctxt "@info:status"
-msgid "Unable to slice because the prime tower or prime position(s) are invalid."
-msgstr "Slicen is niet mogelijk omdat de terugduwpijler of terugduwpositie(s) ongeldig zijn."
+msgid "Backup"
+msgstr "Back-up"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:428
-#, python-format
-msgctxt "@info:status"
-msgid "Unable to slice because there are objects associated with disabled Extruder %s."
-msgstr "Slicen is niet mogelijk omdat er objecten gekoppeld zijn aan uitgeschakelde Extruder %s."
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:132
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup without having proper data or meta data."
+msgstr "Geprobeerd een Cura-back-up te herstellen zonder correcte gegevens of metadata."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
-msgctxt "@info:status"
-msgid ""
-"Please review settings and check if your models:\n"
-"- Fit within the build volume\n"
-"- Are assigned to an enabled extruder\n"
-"- Are not all set as modifier meshes"
-msgstr ""
-"Controleer de instellingen en zorg ervoor dat uw modellen:\n"
-"- binnen het werkvolume passen\n"
-"- zijn toegewezen aan een ingeschakelde extruder\n"
-"- niet allemaal zijn ingesteld als modificatierasters"
+#: /mnt/projects/ultimaker/cura/Cura/cura/Backups/Backup.py:143
+msgctxt "@info:backup_failed"
+msgid "Tried to restore a Cura backup that is higher than the current version."
+msgstr "Geprobeerd een Cura-back-up te herstellen van een versie die hoger is dan de huidige versie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52 /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:26
 msgctxt "@info:status"
-msgid "Processing Layers"
-msgstr "Lagen verwerken"
+msgid "Multiplying and placing objects"
+msgstr "Objecten verveelvoudigen en plaatsen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:28
 msgctxt "@info:title"
-msgid "Information"
-msgstr "Informatie"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/CuraProfileWriter/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura Profile"
-msgstr "Cura-profiel"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
-msgctxt "@info"
-msgid "Could not access update information."
-msgstr "Geen toegang tot update-informatie."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
-#, python-brace-format
-msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
-msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
-msgstr "Er zijn mogelijk nieuwe functies of bugfixes beschikbaar voor uw {machine_name}. Als u nog niet over de nieuwste versie beschikt, is het raadzaam om de firmware op uw printer bij te werken naar versie {latest_version}."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
-#, python-format
-msgctxt "@info:title The %s gets replaced with the printer name."
-msgid "New %s firmware available"
-msgstr "Nieuwe firmware voor %s beschikbaar"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
-msgctxt "@action:button"
-msgid "How to update"
-msgstr "Instructies voor bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
-msgctxt "@action"
-msgid "Update Firmware"
-msgstr "Firmware bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzReader/__init__.py:17 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/__init__.py:17
-msgctxt "@item:inlistbox"
-msgid "Compressed G-code File"
-msgstr "Gecomprimeerd G-code-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
-msgctxt "@error:not supported"
-msgid "GCodeGzWriter does not support text mode."
-msgstr "GCodeGzWriter ondersteunt geen tekstmodus."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeProfileReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:14 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/__init__.py:16
-msgctxt "@item:inlistbox"
-msgid "G-code File"
-msgstr "G-code-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:347
-msgctxt "@info:status"
-msgid "Parsing G-code"
-msgstr "G-code parseren"
+msgid "Placing Objects"
+msgstr "Objecten plaatsen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:349 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:503
+#: /mnt/projects/ultimaker/cura/Cura/cura/MultiplyObjectsJob.py:77
 msgctxt "@info:title"
-msgid "G-code Details"
-msgstr "Details van de G-code"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/FlavorParser.py:501
-msgctxt "@info:generic"
-msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
-msgstr "Zorg ervoor dat de G-code geschikt is voor uw printer en de printerconfiguratie voordat u het bestand verzendt. Mogelijk is de weergave van de G-code niet nauwkeurig."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "G File"
-msgstr "G-bestand"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:74
-msgctxt "@error:not supported"
-msgid "GCodeWriter does not support non-text mode."
-msgstr "GCodeWriter ondersteunt geen non-tekstmodus."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:80 /home/trin/Gedeeld/Projects/Cura/plugins/GCodeWriter/GCodeWriter.py:96
-msgctxt "@warning:status"
-msgid "Please prepare G-code before exporting."
-msgstr "Bereid voorafgaand aan het exporteren G-code voor."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "JPG Image"
-msgstr "JPG-afbeelding"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:18
-msgctxt "@item:inlistbox"
-msgid "JPEG Image"
-msgstr "JPEG-afbeelding"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:22
-msgctxt "@item:inlistbox"
-msgid "PNG Image"
-msgstr "PNG-afbeelding"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:26
-msgctxt "@item:inlistbox"
-msgid "BMP Image"
-msgstr "BMP-afbeelding"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/__init__.py:30
-msgctxt "@item:inlistbox"
-msgid "GIF Image"
-msgstr "GIF-afbeelding"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/LegacyProfileReader/__init__.py:14
-msgctxt "@item:inlistbox"
-msgid "Cura 15.04 profiles"
-msgstr "Cura 15.04-profielen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
-msgctxt "@action"
-msgid "Machine Settings"
-msgstr "Machine-instellingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/__init__.py:14
-msgctxt "@item:inmenu"
-msgid "Monitor"
-msgstr "Controleren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:14
-msgctxt "@label"
-msgid "Per Model Settings"
-msgstr "Instellingen per Model"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/__init__.py:15
-msgctxt "@info:tooltip"
-msgid "Configure Per Model Settings"
-msgstr "Instellingen per Model configureren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
-msgctxt "@item:inmenu"
-msgid "Post Processing"
-msgstr "Nabewerking"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
-msgctxt "@item:inmenu"
-msgid "Modify G-Code"
-msgstr "G-code wijzigen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PrepareStage/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Prepare"
-msgstr "Voorbereiden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PreviewStage/__init__.py:13
-msgctxt "@item:inmenu"
-msgid "Preview"
-msgstr "Voorbeeld"
+msgid "Placing Object"
+msgstr "Object plaatsen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:23
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Save to Removable Drive"
 msgstr "Opslaan op verwisselbaar station"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:24
 #, python-brace-format
 msgctxt "@item:inlistbox"
 msgid "Save to Removable Drive {0}"
 msgstr "Opslaan op Verwisselbaar Station {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:66
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/MeshFormatHandler.py:118
 msgctxt "@info:status"
 msgid "There are no file formats available to write with!"
 msgstr "Er zijn geen bestandsindelingen beschikbaar om te schrijven!"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 #, python-brace-format
 msgctxt "@info:progress Don't translate the XML tags <filename>!"
 msgid "Saving to Removable Drive <filename>{0}</filename>"
 msgstr "Opslaan op Verwisselbaar Station <filename>{0}</filename>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:96
 msgctxt "@info:title"
 msgid "Saving"
 msgstr "Opslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:109
 #, python-brace-format
 msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
 msgid "Could not save to <filename>{0}</filename>: <message>{1}</message>"
 msgstr "Kan niet opslaan als <filename>{0}</filename>: <message>{1}</message>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:125
 #, python-brace-format
 msgctxt "@info:status Don't translate the tag {device}!"
 msgid "Could not find a file name when trying to write to {device}."
 msgstr "Kan geen bestandsnaam vinden tijdens het schrijven naar {device}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138 /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:153
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Could not save to removable drive {0}: {1}"
 msgstr "Kan niet opslaan op verwisselbaar station {0}: {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Saved to Removable Drive {0} as {1}"
 msgstr "Opgeslagen op Verwisselbaar Station {0} als {1}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:147
 msgctxt "@info:title"
 msgid "File Saved"
 msgstr "Bestand opgeslagen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 msgctxt "@action:button"
 msgid "Eject"
 msgstr "Uitwerpen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:148
 #, python-brace-format
 msgctxt "@action"
 msgid "Eject removable device {0}"
 msgstr "Verwisselbaar station {0} uitwerpen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Ejected {0}. You can now safely remove the drive."
 msgstr "{0} is uitgeworpen. U kunt het station nu veilig verwijderen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:163
 msgctxt "@info:title"
 msgid "Safely Remove Hardware"
 msgstr "Hardware veilig verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/RemovableDriveOutputDevice.py:165
 #, python-brace-format
 msgctxt "@info:status"
 msgid "Failed to eject {0}. Another program may be using the drive."
 msgstr "Uitwerpen van {0} is niet gelukt. Mogelijk wordt het station door een ander programma gebruikt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/RemovableDriveOutputDevice/WindowsRemovableDrivePlugin.py:76
 msgctxt "@item:intext"
 msgid "Removable Drive"
 msgstr "Verwisselbaar Station"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:121
-msgctxt "@info:status"
-msgid "Cura does not accurately display layers when Wire Printing is enabled."
-msgstr "Als Draadprinten is ingeschakeld, geeft Cura lagen niet goed weer."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:122
-msgctxt "@info:title"
-msgid "Simulation View"
-msgstr "Simulatieweergave"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:status"
-msgid "Nothing is shown because you need to slice first."
-msgstr "Er wordt niets weergegeven omdat u eerst moet slicen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:123
-msgctxt "@info:title"
-msgid "No layers to show"
-msgstr "Geen lagen om weer te geven"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationView.py:124 /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:73
-msgctxt "@info:option_text"
-msgid "Do not show this message again"
-msgstr "Dit bericht niet meer weergeven"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/__init__.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/AMFReader/__init__.py:15
 msgctxt "@item:inlistbox"
-msgid "Layer view"
-msgstr "Laagweergave"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:70
-msgctxt "@info:status"
-msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
-msgstr "Uw model is niet veelvoudig. De gemarkeerde gebieden geven ofwel ontbrekende of ongebruikelijke oppervlakken aan."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/SolidView.py:72
-msgctxt "@info:title"
-msgid "Model errors"
-msgstr "Modelfouten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SolidView/__init__.py:12
-msgctxt "@item:inmenu"
-msgid "Solid view"
-msgstr "Solide weergave"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:12
-msgctxt "@label"
-msgid "Support Blocker"
-msgstr "Supportblokkering"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SupportEraser/__init__.py:13
-msgctxt "@info:tooltip"
-msgid "Create a volume in which supports are not printed."
-msgstr "Maak een volume waarin supportstructuren niet worden geprint."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
-msgctxt "@info:generic"
-msgid "Do you want to sync material and software packages with your account?"
-msgstr "Wilt u materiaal- en softwarepackages synchroniseren met uw account?"
+msgid "AMF File"
+msgstr "AMF-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
-msgctxt "@info:title"
-msgid "Changes detected from your Ultimaker account"
-msgstr "Wijzigingen gedetecteerd van uw Ultimaker-account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeProfileReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/__init__.py:16
+msgctxt "@item:inlistbox"
+msgid "G-code File"
+msgstr "G-code-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:146
-msgctxt "@action:button"
-msgid "Sync"
-msgstr "Synchroniseren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.py:27
+msgctxt "@action"
+msgid "Update Firmware"
+msgstr "Firmware bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
-msgctxt "@info:generic"
-msgid "Syncing..."
-msgstr "Synchroniseren ..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/X3DReader/__init__.py:13
+msgctxt "@item:inlistbox"
+msgid "X3D File"
+msgstr "X3D-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:9
 msgctxt "@button"
 msgid "Decline"
 msgstr "Nee, ik ga niet akkoord"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:10
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:56
 msgctxt "@button"
 msgid "Agree"
 msgstr "Akkoord"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicenseModel.py:74
 msgctxt "@title:window"
 msgid "Plugin License Agreement"
 msgstr "Licentieovereenkomst invoegtoepassing"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/LicensePresenter.py:38
 msgctxt "@button"
 msgid "Decline and remove from account"
 msgstr "Weigeren en verwijderen uit account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:79
+msgctxt "@info:generic"
+msgid "{} plugins failed to download"
+msgstr "{} plug-ins zijn niet gedownload"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:89
+msgctxt "@info:generic"
+msgid "Syncing..."
+msgstr "Synchroniseren ..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/DownloadPresenter.py:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:143
+msgctxt "@info:title"
+msgid "Changes detected from your Ultimaker account"
+msgstr "Wijzigingen gedetecteerd van uw Ultimaker-account"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/RestartApplicationPresenter.py:20
 msgctxt "@info:generic"
 msgid "You need to quit and restart {} before changes have effect."
 msgstr "U moet {} afsluiten en herstarten voordat de wijzigingen van kracht worden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/src/CloudSync/SyncOrchestrator.py:76
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:142
 msgctxt "@info:generic"
-msgid "{} plugins failed to download"
-msgstr "{} plug-ins zijn niet gedownload"
+msgid "Do you want to sync material and software packages with your account?"
+msgstr "Wilt u materiaal- en softwarepackages synchroniseren met uw account?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:15
-msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
-msgid "Open Compressed Triangle Mesh"
-msgstr "Gecomprimeerde driehoeksnet openen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/src/CloudSync/CloudPackageChecker.py:145
+msgctxt "@action:button"
+msgid "Sync"
+msgstr "Synchroniseren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:19
-msgctxt "@item:inlistbox"
-msgid "COLLADA Digital Asset Exchange"
-msgstr "COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:14
+msgctxt "@label"
+msgid "Per Model Settings"
+msgstr "Instellingen per Model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:23
-msgctxt "@item:inlistbox"
-msgid "glTF Binary"
-msgstr "glTF-binair"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/__init__.py:15
+msgctxt "@info:tooltip"
+msgid "Configure Per Model Settings"
+msgstr "Instellingen per Model configureren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:27
-msgctxt "@item:inlistbox"
-msgid "glTF Embedded JSON"
-msgstr "glTF-ingesloten JSON"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:35
+msgctxt "@item:inmenu"
+msgid "Post Processing"
+msgstr "Nabewerking"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:36
-msgctxt "@item:inlistbox"
-msgid "Stanford Triangle Format"
-msgstr "Stanford-driehoeksformaat"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.py:36
+msgctxt "@item:inmenu"
+msgid "Modify G-Code"
+msgstr "G-code wijzigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/TrimeshReader/__init__.py:40
-msgctxt "@item:inlistbox"
-msgid "Compressed COLLADA Digital Asset Exchange"
-msgstr "Gecomprimeerde COLLADA Digital Asset Exchange"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+msgctxt "@info:status"
+msgid "Unable to slice with the current material as it is incompatible with the selected machine or configuration."
+msgstr "Met het huidige materiaal is slicen niet mogelijk, omdat het materiaal niet compatibel is met de geselecteerde machine of configuratie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPReader/__init__.py:22 /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/__init__.py:28
-msgctxt "@item:inlistbox"
-msgid "Ultimaker Format Package"
-msgstr "Ultimaker Format Package"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:382
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:413
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:437
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:446
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:455
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:467
+msgctxt "@info:title"
+msgid "Unable to slice"
+msgstr "Kan niet slicen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UFPWriter/UFPWriter.py:146
-msgctxt "@info:error"
-msgid "Can't write to UFP file:"
-msgstr "Kan niet naar UFP-bestand schrijven:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:412
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice with the current settings. The following settings have errors: {0}"
+msgstr "Met de huidige instellingen is slicing niet mogelijk. De volgende instellingen bevatten fouten: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
-msgctxt "@action"
-msgid "Level build plate"
-msgstr "Platform kalibreren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:436
+#, python-brace-format
+msgctxt "@info:status"
+msgid "Unable to slice due to some per-model settings. The following settings have errors on one or more models: {error_labels}"
+msgstr "Slicing is niet mogelijk vanwege enkele instellingen per model. De volgende instellingen bevatten fouten voor een of meer modellen: {error_labels}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
-msgctxt "@action"
-msgid "Select upgrades"
-msgstr "Upgrades selecteren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:445
+msgctxt "@info:status"
+msgid "Unable to slice because the prime tower or prime position(s) are invalid."
+msgstr "Slicen is niet mogelijk omdat de terugduwpijler of terugduwpositie(s) ongeldig zijn."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
-msgctxt "@action:button"
-msgid "Print via cloud"
-msgstr "Printen via Cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:454
+#, python-format
+msgctxt "@info:status"
+msgid "Unable to slice because there are objects associated with disabled Extruder %s."
+msgstr "Slicen is niet mogelijk omdat er objecten gekoppeld zijn aan uitgeschakelde Extruder %s."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
-msgctxt "@properties:tooltip"
-msgid "Print via cloud"
-msgstr "Printen via Cloud"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/CuraEngineBackend.py:463
+msgctxt "@info:status"
+msgid ""
+"Please review settings and check if your models:\n"
+"- Fit within the build volume\n"
+"- Are assigned to an enabled extruder\n"
+"- Are not all set as modifier meshes"
+msgstr ""
+"Controleer de instellingen en zorg ervoor dat uw modellen:\n"
+"- binnen het werkvolume passen\n"
+"- zijn toegewezen aan een ingeschakelde extruder\n"
+"- niet allemaal zijn ingesteld als modificatierasters"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:52
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
 msgctxt "@info:status"
-msgid "Connected via cloud"
-msgstr "Verbonden via Cloud"
+msgid "Processing Layers"
+msgstr "Lagen verwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
-#, python-brace-format
-msgctxt "@error:send"
-msgid "Unknown error code when uploading print job: {0}"
-msgstr "Onbekende foutcode bij uploaden printtaak: {0}"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraEngineBackend/ProcessSlicedLayersJob.py:260
+msgctxt "@info:title"
+msgid "Information"
+msgstr "Informatie"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
+msgctxt "@item:inmenu"
+msgid "USB printing"
+msgstr "USB-printen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
+msgctxt "@action:button Preceded by 'Ready to'."
+msgid "Print via USB"
+msgstr "Printen via USB"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
+msgctxt "@info:tooltip"
+msgid "Print via USB"
+msgstr "Via USB Printen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
+msgctxt "@info:status"
+msgid "Connected via USB"
+msgstr "Aangesloten via USB"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
+msgctxt "@label"
+msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
+msgstr "Er wordt momenteel via USB geprint. Wanneer u Cura afsluit, wordt het printen gestopt. Weet u zeker dat u wilt afsluiten?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
+msgstr "Er wordt nog een print afgedrukt. Cura kan pas een nieuwe print via USB starten zodra de vorige print is voltooid."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
+msgctxt "@message"
+msgid "Print in Progress"
+msgstr "Bezig met printen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileWriter/__init__.py:14
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura Profile"
+msgstr "Cura-profiel"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+msgctxt "@action"
+msgid "Connect via Network"
+msgstr "Verbinding Maken via Netwerk"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:227
 msgctxt "info:status"
 msgid "New printer detected from your Ultimaker account"
 msgid_plural "New printers detected from your Ultimaker account"
 msgstr[0] "Nieuwe printer gedetecteerd van uw Ultimaker-account"
 msgstr[1] "Nieuwe printers gedetecteerd van uw Ultimaker-account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:238
 #, python-brace-format
 msgctxt "info:status Filled in with printer name and printer model."
 msgid "Adding printer {name} ({model}) from your account"
 msgstr "Printer {name} ({model}) toevoegen vanaf uw account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:255
 #, python-brace-format
 msgctxt "info:{0} gets replaced by a number of printers"
 msgid "... and {0} other"
@@ -1295,70 +1030,71 @@ msgid_plural "... and {0} others"
 msgstr[0] "... en {0} andere"
 msgstr[1] "... en {0} andere"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:260
 msgctxt "info:status"
 msgid "Printers added from Digital Factory:"
 msgstr "Printers toegevoegd vanuit Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:316
 msgctxt "info:status"
 msgid "A cloud connection is not available for a printer"
 msgid_plural "A cloud connection is not available for some printers"
 msgstr[0] "Een cloudverbinding is niet beschikbaar voor een printer"
 msgstr[1] "Een cloudverbinding is niet beschikbaar voor meerdere printers"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:324
 msgctxt "info:status"
 msgid "This printer is not linked to the Digital Factory:"
 msgid_plural "These printers are not linked to the Digital Factory:"
 msgstr[0] "Deze printer is niet gekoppeld aan de Digital Factory:"
 msgstr[1] "Deze printers zijn niet gekoppeld aan de Digital Factory:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:329
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:419
 msgctxt "info:name"
 msgid "Ultimaker Digital Factory"
 msgstr "Ultimaker Digital Factory"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:333
 #, python-brace-format
 msgctxt "info:status"
 msgid "To establish a connection, please visit the {website_link}"
 msgstr "Ga naar {website_link} om een verbinding tot stand te brengen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:337
 msgctxt "@action:button"
 msgid "Keep printer configurations"
 msgstr "Printerconfiguraties behouden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:342
 msgctxt "@action:button"
 msgid "Remove printers"
 msgstr "Printers verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:421
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "{printer_name} will be removed until the next account sync."
 msgstr "{printer_name} wordt verwijderd tot de volgende accountsynchronisatie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:422
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "To remove {printer_name} permanently, visit {digital_factory_link}"
 msgstr "Bezoek {digital_factory_link} om {printer_name} permanent te verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:423
 #, python-brace-format
 msgctxt "@message {printer_name} is replaced with the name of the printer"
 msgid "Are you sure you want to remove {printer_name} temporarily?"
 msgstr "Weet u zeker dat u {printer_name} tijdelijk wilt verwijderen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:460
 msgctxt "@title:window"
 msgid "Remove printers?"
 msgstr "Printers verwijderen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:463
 #, python-brace-format
 msgctxt "@label"
 msgid ""
@@ -1374,7 +1110,7 @@ msgstr[1] ""
 "U staat op het punt om {0} printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n"
 "Weet u zeker dat u door wilt gaan?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDeviceManager.py:468
 msgctxt "@label"
 msgid ""
 "You are about to remove all printers from Cura. This action cannot be undone.\n"
@@ -1383,2090 +1119,2487 @@ msgstr ""
 "U staat op het punt om alle printers uit Cura te verwijderen. Deze actie kan niet ongedaan worden gemaakt.\n"
 "Weet u zeker dat u door wilt gaan?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
-msgctxt "@info:status"
-msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
-msgstr "Verzend en controleer overal printtaken met uw Ultimaker-account."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:152
+msgctxt "@action:button"
+msgid "Print via cloud"
+msgstr "Printen via Cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
-msgctxt "@info:status Ultimaker Cloud should not be translated."
-msgid "Connect to Ultimaker Digital Factory"
-msgstr "Verbinden met Ultimaker Digital Factory"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:153
+msgctxt "@properties:tooltip"
+msgid "Print via cloud"
+msgstr "Printen via Cloud"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
-msgctxt "@action"
-msgid "Get started"
-msgstr "Aan de slag"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:154
+msgctxt "@info:status"
+msgid "Connected via cloud"
+msgstr "Verbonden via Cloud"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Cloud/CloudOutputDevice.py:264
+#, python-brace-format
+msgctxt "@error:send"
+msgid "Unknown error code when uploading print job: {0}"
+msgstr "Onbekende foutcode bij uploaden printtaak: {0}"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
 msgctxt "@info:status"
-msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
-msgstr "U probeert verbinding te maken met een printer waarop Ultimaker Connect niet wordt uitgevoerd. Werk de printer bij naar de nieuwste firmware."
+msgid "tomorrow"
+msgstr "morgen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
-msgctxt "@info:title"
-msgid "Update your printer"
-msgstr "Uw printer bijwerken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
+msgctxt "@info:status"
+msgid "today"
+msgstr "vandaag"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
-#, python-brace-format
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
 msgctxt "@info:status"
-msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
-msgstr "Cura heeft materiaalprofielen gedetecteerd die nog niet op de hostprinter van groep {0} zijn geïnstalleerd."
+msgid "Sending Print Job"
+msgstr "Printtaak verzenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
-msgctxt "@info:title"
-msgid "Sending materials to printer"
-msgstr "De materialen worden naar de printer verzonden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
+msgctxt "@info:status"
+msgid "Uploading print job to printer."
+msgstr "Printtaak naar printer aan het uploaden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:27
 #, python-brace-format
 msgctxt "@info:status"
 msgid "You are attempting to connect to {0} but it is not the host of a group. You can visit the web page to configure it as a group host."
 msgstr "U probeert verbinding te maken met {0}, maar deze is niet de host van een groep. U kunt de webpagina bezoeken om deze als groephost te configureren."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:30
 msgctxt "@info:title"
 msgid "Not a group host"
 msgstr "Geen groephost"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/NotClusterHostMessage.py:35
 msgctxt "@action"
 msgid "Configure group"
 msgstr "Groep configureren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:27
+msgctxt "@info:status"
+msgid "Send and monitor print jobs from anywhere using your Ultimaker account."
+msgstr "Verzend en controleer overal printtaken met uw Ultimaker-account."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:33
+msgctxt "@info:status Ultimaker Cloud should not be translated."
+msgid "Connect to Ultimaker Digital Factory"
+msgstr "Verbinden met Ultimaker Digital Factory"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/CloudFlowMessage.py:36
+msgctxt "@action"
+msgid "Get started"
+msgstr "Aan de slag"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:15
 msgctxt "@info:status"
 msgid "Please wait until the current job has been sent."
 msgstr "Wacht tot de huidige taak is verzonden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadBlockedMessage.py:16
 msgctxt "@info:title"
 msgid "Print error"
 msgstr "Printfout"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:15
 msgctxt "@info:text"
 msgid "Could not upload the data to the printer."
 msgstr "Kan de gegevens niet uploaden naar de printer."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadErrorMessage.py:16
 msgctxt "@info:title"
 msgid "Network error"
 msgstr "Netwerkfout"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:24
+#, python-brace-format
 msgctxt "@info:status"
-msgid "Sending Print Job"
-msgstr "Printtaak verzenden"
+msgid "Cura has detected material profiles that were not yet installed on the host printer of group {0}."
+msgstr "Cura heeft materiaalprofielen gedetecteerd die nog niet op de hostprinter van groep {0} zijn geïnstalleerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadProgressMessage.py:16
-msgctxt "@info:status"
-msgid "Uploading print job to printer."
-msgstr "Printtaak naar printer aan het uploaden."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/MaterialSyncMessage.py:26
+msgctxt "@info:title"
+msgid "Sending materials to printer"
+msgstr "De materialen worden naar de printer verzonden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:16
 msgctxt "@info:status"
 msgid "Print job queue is full. The printer can't accept a new job."
 msgstr "Wachtrij voor afdruktaken is vol. De printer kan geen nieuwe taken accepteren."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadQueueFullMessage.py:17
 msgctxt "@info:title"
 msgid "Queue Full"
 msgstr "Wachtrij vol"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:15
 msgctxt "@info:status"
 msgid "Print job was successfully sent to the printer."
 msgstr "De printtaak is naar de printer verzonden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/PrintJobUploadSuccessMessage.py:16
 msgctxt "@info:title"
 msgid "Data Sent"
 msgstr "Gegevens verzonden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:18
+msgctxt "@info:status"
+msgid "You are attempting to connect to a printer that is not running Ultimaker Connect. Please update the printer to the latest firmware."
+msgstr "U probeert verbinding te maken met een printer waarop Ultimaker Connect niet wordt uitgevoerd. Werk de printer bij naar de nieuwste firmware."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Messages/LegacyDeviceNoLongerSupportedMessage.py:21
+msgctxt "@info:title"
+msgid "Update your printer"
+msgstr "Uw printer bijwerken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:58
 msgctxt "@action:button Preceded by 'Ready to'."
 msgid "Print over network"
 msgstr "Printen via netwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:59
 msgctxt "@properties:tooltip"
 msgid "Print over network"
 msgstr "Printen via netwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDevice.py:60
 msgctxt "@info:status"
 msgid "Connected over the network"
 msgstr "Via het netwerk verbonden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/UltimakerNetworkedPrinterAction.py:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelection.py:21
 msgctxt "@action"
-msgid "Connect via Network"
-msgstr "Verbinding Maken via Netwerk"
+msgid "Select upgrades"
+msgstr "Upgrades selecteren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:27
-msgctxt "@info:status"
-msgid "tomorrow"
-msgstr "morgen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.py:24
+msgctxt "@action"
+msgid "Level build plate"
+msgstr "Platform kalibreren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/src/Utils.py:30
-msgctxt "@info:status"
-msgid "today"
-msgstr "vandaag"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:203
+msgctxt "@title:tab"
+msgid "Recommended"
+msgstr "Aanbevolen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:42
-msgctxt "@item:inmenu"
-msgid "USB printing"
-msgstr "USB-printen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.py:205
+msgctxt "@title:tab"
+msgid "Custom"
+msgstr "Aangepast"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:43
-msgctxt "@action:button Preceded by 'Ready to'."
-msgid "Print via USB"
-msgstr "Printen via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:535
+#, python-brace-format
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> contains an unknown machine type <message>{1}</message>. Cannot import the machine. Models will be imported instead."
+msgstr "Projectbestand <filename>{0}</filename> bevat een onbekend type machine <message>{1}</message>. Kan de machine niet importeren. In plaats daarvan worden er modellen geïmporteerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:44
-msgctxt "@info:tooltip"
-msgid "Print via USB"
-msgstr "Via USB Printen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:538
+msgctxt "@info:title"
+msgid "Open Project File"
+msgstr "Projectbestand Openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:80
-msgctxt "@info:status"
-msgid "Connected via USB"
-msgstr "Aangesloten via USB"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:634
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is suddenly inaccessible: <message>{1}</message>."
+msgstr "Projectbestand <filename>{0}</filename> is plotseling ontoegankelijk: <message>{1}</message>."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:110
-msgctxt "@label"
-msgid "A USB print is in progress, closing Cura will stop this print. Are you sure?"
-msgstr "Er wordt momenteel via USB geprint. Wanneer u Cura afsluit, wordt het printen gestopt. Weet u zeker dat u wilt afsluiten?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:635
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:642
+msgctxt "@info:title"
+msgid "Can't Open Project File"
+msgstr "Kan projectbestand niet openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "A print is still in progress. Cura cannot start another print via USB until the previous print has completed."
-msgstr "Er wordt nog een print afgedrukt. Cura kan pas een nieuwe print via USB starten zodra de vorige print is voltooid."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:641
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tags <filename> or <message>!"
+msgid "Project file <filename>{0}</filename> is corrupt: <message>{1}</message>."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/USBPrinting/USBPrinterOutputDevice.py:134
-msgctxt "@message"
-msgid "Print in Progress"
-msgstr "Bezig met printen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/ThreeMFWorkspaceReader.py:693
+#, python-brace-format
+msgctxt "@info:error Don't translate the XML tag <filename>!"
+msgid "Project file <filename>{0}</filename> is made using profiles that are unknown to this version of Ultimaker Cura."
+msgstr "Projectbestand <filename>{0}</filename> wordt gemaakt met behulp van profielen die onbekend zijn bij deze versie van Ultimaker Cura."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/X3DReader/__init__.py:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/__init__.py:33
 msgctxt "@item:inlistbox"
-msgid "X3D File"
-msgstr "X3D-bestand"
+msgid "3MF File"
+msgstr "3MF-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/XRayView/__init__.py:12
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/__init__.py:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzReader/__init__.py:17
 msgctxt "@item:inlistbox"
-msgid "X-Ray view"
-msgstr "Röntgenweergave"
+msgid "Compressed G-code File"
+msgstr "Gecomprimeerd G-code-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ModelChecker/ModelChecker.qml:22
-msgctxt "@info:tooltip"
-msgid "Some things could be problematic in this print. Click to see tips for adjustment."
-msgstr "In deze print kunnen problemen ontstaan. Klik om tips voor aanpassingen te bekijken."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeGzWriter/GCodeGzWriter.py:43
+msgctxt "@error:not supported"
+msgid "GCodeGzWriter does not support text mode."
+msgstr "GCodeGzWriter ondersteunt geen tekstmodus."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:14
-msgctxt "@title:window"
-msgid "Open Project"
-msgstr "Project openen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:31
+msgctxt "@info:title"
+msgid "3D Model Assistant"
+msgstr "3D-modelassistent"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:61
-msgctxt "@action:ComboBox Update/override existing profile"
-msgid "Update existing"
-msgstr "Bestaand(e) bijwerken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.py:96
+#, python-brace-format
+msgctxt "@info:status"
+msgid ""
+"<p>One or more 3D models may not print optimally due to the model size and material configuration:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Find out how to ensure the best possible print quality and reliability.</p>\n"
+"<p><a href=\"https://ultimaker.com/3D-model-assistant\">View print quality guide</a></p>"
+msgstr ""
+"<p>Een of meer 3D-modellen worden mogelijk niet optimaal geprint vanwege het modelformaat en de materiaalconfiguratie:</p>\n"
+"<p>{model_names}</p>\n"
+"<p>Ontdek hoe u de best mogelijke printkwaliteit en betrouwbaarheid verkrijgt.</p>\n"
+"<p><a href=”https://ultimaker.com/3D-model-assistant”>Handleiding printkwaliteit bekijken</a></p>"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
-msgctxt "@action:ComboBox Save settings in a new profile"
-msgid "Create new"
-msgstr "Nieuw maken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerJob.py:127
+msgctxt "@info"
+msgid "Could not access update information."
+msgstr "Geen toegang tot update-informatie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:74 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
-msgctxt "@action:title"
-msgid "Summary - Cura Project"
-msgstr "Samenvatting - Cura-project"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:17
+#, python-brace-format
+msgctxt "@info Don't translate {machine_name}, since it gets replaced by a printer name!"
+msgid "New features or bug-fixes may be available for your {machine_name}! If not already at the latest version, it is recommended to update the firmware on your printer to version {latest_version}."
+msgstr "Er zijn mogelijk nieuwe functies of bugfixes beschikbaar voor uw {machine_name}. Als u nog niet over de nieuwste versie beschikt, is het raadzaam om de firmware op uw printer bij te werken naar versie {latest_version}."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:96 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
-msgctxt "@action:label"
-msgid "Printer settings"
-msgstr "Printerinstellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:22
+#, python-format
+msgctxt "@info:title The %s gets replaced with the printer name."
+msgid "New %s firmware available"
+msgstr "Nieuwe firmware voor %s beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:112
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the machine be resolved?"
-msgstr "Hoe dient het conflict in de machine te worden opgelost?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdateChecker/FirmwareUpdateCheckerMessage.py:28
+msgctxt "@action:button"
+msgid "How to update"
+msgstr "Instructies voor bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:165 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
-msgctxt "@action:label"
-msgid "Type"
-msgstr "Type"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "G File"
+msgstr "G-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:181 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
-msgctxt "@action:label"
-msgid "Printer Group"
-msgstr "Printergroep"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:347
+msgctxt "@info:status"
+msgid "Parsing G-code"
+msgstr "G-code parseren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:203 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
-msgctxt "@action:label"
-msgid "Profile settings"
-msgstr "Profielinstellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:349
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:503
+msgctxt "@info:title"
+msgid "G-code Details"
+msgstr "Details van de G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:219
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeReader/FlavorParser.py:501
+msgctxt "@info:generic"
+msgid "Make sure the g-code is suitable for your printer and printer configuration before sending the file to it. The g-code representation may not be accurate."
+msgstr "Zorg ervoor dat de G-code geschikt is voor uw printer en de printerconfiguratie voordat u het bestand verzendt. Mogelijk is de weergave van de G-code niet nauwkeurig."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:12
+msgctxt "@label"
+msgid "Support Blocker"
+msgstr "Supportblokkering"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SupportEraser/__init__.py:13
 msgctxt "@info:tooltip"
-msgid "How should the conflict in the profile be resolved?"
-msgstr "Hoe dient het conflict in het profiel te worden opgelost?"
+msgid "Create a volume in which supports are not printed."
+msgstr "Maak een volume waarin supportstructuren niet worden geprint."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:239 /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:349 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
-msgctxt "@action:label"
-msgid "Name"
-msgstr "Naam"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:15
+msgctxt "@item:inlistbox 'Open' is part of the name of this file format."
+msgid "Open Compressed Triangle Mesh"
+msgstr "Gecomprimeerde driehoeksnet openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:255 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
-msgctxt "@action:label"
-msgid "Intent"
-msgstr "Intent"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:19
+msgctxt "@item:inlistbox"
+msgid "COLLADA Digital Asset Exchange"
+msgstr "COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:271 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
-msgctxt "@action:label"
-msgid "Not in profile"
-msgstr "Niet in profiel"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:23
+msgctxt "@item:inlistbox"
+msgid "glTF Binary"
+msgstr "glTF-binair"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:276 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
-msgctxt "@action:label"
-msgid "%1 override"
-msgid_plural "%1 overrides"
-msgstr[0] "%1 overschrijving"
-msgstr[1] "%1 overschrijvingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:27
+msgctxt "@item:inlistbox"
+msgid "glTF Embedded JSON"
+msgstr "glTF-ingesloten JSON"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:287
-msgctxt "@action:label"
-msgid "Derivative from"
-msgstr "Afgeleide van"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:36
+msgctxt "@item:inlistbox"
+msgid "Stanford Triangle Format"
+msgstr "Stanford-driehoeksformaat"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:292
-msgctxt "@action:label"
-msgid "%1, %2 override"
-msgid_plural "%1, %2 overrides"
-msgstr[0] "%1, %2 overschrijving"
-msgstr[1] "%1, %2 overschrijvingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/TrimeshReader/__init__.py:40
+msgctxt "@item:inlistbox"
+msgid "Compressed COLLADA Digital Asset Exchange"
+msgstr "Gecomprimeerde COLLADA Digital Asset Exchange"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:309
-msgctxt "@action:label"
-msgid "Material settings"
-msgstr "Materiaalinstellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPReader/__init__.py:22
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/__init__.py:28
+msgctxt "@item:inlistbox"
+msgid "Ultimaker Format Package"
+msgstr "Ultimaker Format Package"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:325
-msgctxt "@info:tooltip"
-msgid "How should the conflict in the material be resolved?"
-msgstr "Hoe dient het materiaalconflict te worden opgelost?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/LegacyProfileReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "Cura 15.04 profiles"
+msgstr "Cura 15.04-profielen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:369
-msgctxt "@action:label"
-msgid "Setting visibility"
-msgstr "Zichtbaarheid instellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PrepareStage/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Prepare"
+msgstr "Voorbereiden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:378
-msgctxt "@action:label"
-msgid "Mode"
-msgstr "Modus"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/__init__.py:14
+msgctxt "@item:inmenu"
+msgid "Monitor"
+msgstr "Controleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:394
-msgctxt "@action:label"
-msgid "Visible settings:"
-msgstr "Zichtbare instellingen:"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/XRayView/__init__.py:12
+msgctxt "@item:inlistbox"
+msgid "X-Ray view"
+msgstr "Röntgenweergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:399
-msgctxt "@action:label"
-msgid "%1 out of %2"
-msgstr "%1 van %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWriter.py:206
+msgctxt "@error:zip"
+msgid "Error writing 3mf file."
+msgstr "Fout bij het schrijven van het 3mf-bestand."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:425
-msgctxt "@action:warning"
-msgid "Loading a project will clear all models on the build plate."
-msgstr "Als u een project laadt, worden alle modellen van het platform gewist."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "3MF file"
+msgstr "3MF-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/3MFReader/WorkspaceDialog.qml:453
-msgctxt "@action:button"
-msgid "Open"
-msgstr "Openen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/__init__.py:34
+msgctxt "@item:inlistbox"
+msgid "Cura Project 3MF file"
+msgstr "Cura-project 3MF-bestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
-msgctxt "@button"
-msgid "Want more?"
-msgstr "Wilt u meer?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:31
+msgctxt "@error:zip"
+msgid "3MF Writer plug-in is corrupt."
+msgstr "3MF-schrijverplug-in is beschadigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
-msgctxt "@button"
-msgid "Backup Now"
-msgstr "Nu back-up maken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:92
+msgctxt "@error:zip"
+msgid "No permission to write the workspace here."
+msgstr "Geen bevoegdheid om de werkruimte hier te schrijven."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
-msgctxt "@checkbox:description"
-msgid "Auto Backup"
-msgstr "Auto back-up"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFWriter/ThreeMFWorkspaceWriter.py:96
+msgctxt "@error:zip"
+msgid "The operating system does not allow saving a project file to this location or with this file name."
+msgstr "Het besturingssysteem staat niet toe dat u een projectbestand opslaat op deze locatie of met deze bestandsnaam."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
-msgctxt "@checkbox:description"
-msgid "Automatically create a backup each day that Cura is started."
-msgstr "Maak elke dag dat Cura wordt gestart, automatisch een back-up."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PreviewStage/__init__.py:13
+msgctxt "@item:inmenu"
+msgid "Preview"
+msgstr "Voorbeeld"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
-msgctxt "@button"
-msgid "Restore"
-msgstr "Herstellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/__init__.py:15
+msgctxt "@item:inlistbox"
+msgid "Layer view"
+msgstr "Laagweergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
-msgctxt "@dialog:title"
-msgid "Delete Backup"
-msgstr "Back-up verwijderen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:124
+msgctxt "@info:status"
+msgid "Cura does not accurately display layers when Wire Printing is enabled."
+msgstr "Als Draadprinten is ingeschakeld, geeft Cura lagen niet goed weer."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
-msgctxt "@dialog:info"
-msgid "Are you sure you want to delete this backup? This cannot be undone."
-msgstr "Weet u zeker dat u deze back-up wilt verwijderen? Dit kan niet ongedaan worden gemaakt."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:125
+msgctxt "@info:title"
+msgid "Simulation View"
+msgstr "Simulatieweergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
-msgctxt "@dialog:title"
-msgid "Restore Backup"
-msgstr "Back-up herstellen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:status"
+msgid "Nothing is shown because you need to slice first."
+msgstr "Er wordt niets weergegeven omdat u eerst moet slicen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
-msgctxt "@dialog:info"
-msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
-msgstr "U moet Cura opnieuw starten voordat uw back-up wordt hersteld. Wilt u Cura nu sluiten?"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:126
+msgctxt "@info:title"
+msgid "No layers to show"
+msgstr "Geen lagen om weer te geven"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
-msgctxt "@backuplist:label"
-msgid "Cura Version"
-msgstr "Cura-versie"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationView.py:127
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:74
+msgctxt "@info:option_text"
+msgid "Do not show this message again"
+msgstr "Dit bericht niet meer weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
-msgctxt "@backuplist:label"
-msgid "Machines"
-msgstr "Machines"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.py:32
+msgctxt "@action"
+msgid "Machine Settings"
+msgstr "Machine-instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
-msgctxt "@backuplist:label"
-msgid "Materials"
-msgstr "Materialen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/__init__.py:12
+msgctxt "@item:inmenu"
+msgid "Solid view"
+msgstr "Solide weergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
-msgctxt "@backuplist:label"
-msgid "Profiles"
-msgstr "Profielen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:71
+msgctxt "@info:status"
+msgid "The highlighted areas indicate either missing or extraneous surfaces. Fix your model and open it again into Cura."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
-msgctxt "@backuplist:label"
-msgid "Plugins"
-msgstr "Invoegtoepassingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:73
+msgctxt "@info:title"
+msgid "Model Errors"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/main.qml:25
-msgctxt "@title:window"
-msgid "Cura Backups"
-msgstr "Cura-back-ups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SolidView/SolidView.py:79
+msgctxt "@action:button"
+msgid "Learn more"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
-msgctxt "@title"
-msgid "My Backups"
-msgstr "Mijn back-ups"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UFPWriter/UFPWriter.py:134
+msgctxt "@info:error"
+msgid "Can't write to UFP file:"
+msgstr "Kan niet naar UFP-bestand schrijven:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
-msgctxt "@empty_state"
-msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
-msgstr "U hebt momenteel geen back-ups. Gebruik de knop 'Nu back-up maken' om een back-up te maken."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:74
+msgctxt "@error:not supported"
+msgid "GCodeWriter does not support non-text mode."
+msgstr "GCodeWriter ondersteunt geen non-tekstmodus."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
-msgctxt "@backup_limit_info"
-msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
-msgstr "Tijdens de voorbeeldfase zijn er maximaal 5 back-ups zichtbaar. Verwijder een back-up als u oudere back-ups wilt bekijken."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/GCodeWriter/GCodeWriter.py:96
+msgctxt "@warning:status"
+msgid "Please prepare G-code before exporting."
+msgstr "Bereid voorafgaand aan het exporteren G-code voor."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
-msgctxt "@description"
-msgid "Backup and synchronize your Cura settings."
-msgstr "Maak een back-up van uw Cura-instellingen en synchroniseer deze."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:14
+msgctxt "@item:inlistbox"
+msgid "JPG Image"
+msgstr "JPG-afbeelding"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39 /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:68 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:125
-msgctxt "@button"
-msgid "Sign in"
-msgstr "Aanmelden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:18
+msgctxt "@item:inlistbox"
+msgid "JPEG Image"
+msgstr "JPEG-afbeelding"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:22
+msgctxt "@item:inlistbox"
+msgid "PNG Image"
+msgstr "PNG-afbeelding"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:26
+msgctxt "@item:inlistbox"
+msgid "BMP Image"
+msgstr "BMP-afbeelding"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/__init__.py:30
+msgctxt "@item:inlistbox"
+msgid "GIF Image"
+msgstr "GIF-afbeelding"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DriveApiService.py:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/RestoreBackupJob.py:23
+msgctxt "@info:backup_status"
+msgid "There was an error trying to restore your backup."
+msgstr "Er is een fout opgetreden tijdens het herstellen van uw back-up."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:26
+msgctxt "@info:title"
+msgid "Backups"
+msgstr "Back-ups"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:27
+msgctxt "@info:backup_status"
+msgid "There was an error while uploading your backup."
+msgstr "Er is een fout opgetreden tijdens het uploaden van uw back-up."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:47
+msgctxt "@info:backup_status"
+msgid "Creating your backup..."
+msgstr "Uw back-up maken..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:54
+msgctxt "@info:backup_status"
+msgid "There was an error while creating your backup."
+msgstr "Er is een fout opgetreden bij het maken van de back-up."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:58
+msgctxt "@info:backup_status"
+msgid "Uploading your backup..."
+msgstr "Uw back-up wordt geüpload..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:68
+msgctxt "@info:backup_status"
+msgid "Your backup has finished uploading."
+msgstr "Uw back-up is geüpload."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/CreateBackupJob.py:107
+msgctxt "@error:file_size"
+msgid "The backup exceeds the maximum file size."
+msgstr "De back-up is groter dan de maximale bestandsgrootte."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/DrivePluginExtension.py:64
+msgctxt "@item:inmenu"
+msgid "Manage backups"
+msgstr "Back-ups beheren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:31
 msgctxt "@title"
 msgid "Update Firmware"
 msgstr "Firmware bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:39
 msgctxt "@label"
 msgid "Firmware is the piece of software running directly on your 3D printer. This firmware controls the step motors, regulates the temperature and ultimately makes your printer work."
 msgstr "Firmware is de software die direct op de 3D-printer wordt uitgevoerd. Deze firmware bedient de stappenmotoren, regelt de temperatuur en zorgt er in feite voor dat de printer doet wat deze moet doen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:46
 msgctxt "@label"
 msgid "The firmware shipping with new printers works, but new versions tend to have more features and improvements."
 msgstr "De firmware die bij nieuwe printers wordt geleverd, werkt wel, maar nieuwe versies hebben vaak meer functies en verbeteringen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:58
 msgctxt "@action:button"
 msgid "Automatically upgrade Firmware"
 msgstr "Firmware-upgrade Automatisch Uitvoeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:69
 msgctxt "@action:button"
 msgid "Upload custom Firmware"
 msgstr "Aangepaste Firmware Uploaden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:83
 msgctxt "@label"
 msgid "Firmware can not be updated because there is no connection with the printer."
 msgstr "Kan de firmware niet bijwerken omdat er geen verbinding met de printer is."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:91
 msgctxt "@label"
 msgid "Firmware can not be updated because the connection with the printer does not support upgrading firmware."
 msgstr "Kan de firmware niet bijwerken omdat de verbinding met de printer geen ondersteuning biedt voor het uitvoeren van een firmware-upgrade."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:98
 msgctxt "@title:window"
 msgid "Select custom firmware"
 msgstr "Aangepaste firmware selecteren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:119
 msgctxt "@title:window"
 msgid "Firmware Update"
 msgstr "Firmware-update"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:143
 msgctxt "@label"
 msgid "Updating firmware."
 msgstr "De firmware wordt bijgewerkt."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:145
 msgctxt "@label"
 msgid "Firmware update completed."
 msgstr "De firmware-update is voltooid."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:147
 msgctxt "@label"
 msgid "Firmware update failed due to an unknown error."
 msgstr "Firmware-update mislukt door een onbekende fout."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:149
 msgctxt "@label"
 msgid "Firmware update failed due to an communication error."
 msgstr "Firmware-update mislukt door een communicatiefout."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:151
 msgctxt "@label"
 msgid "Firmware update failed due to an input/output error."
 msgstr "Firmware-update mislukt door een invoer-/uitvoerfout."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/FirmwareUpdater/FirmwareUpdaterMachineAction.qml:153
 msgctxt "@label"
 msgid "Firmware update failed due to missing firmware."
 msgstr "Firmware-update mislukt door ontbrekende firmware."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:19
-msgctxt "@title:window"
-msgid "Convert Image..."
-msgstr "Afbeelding Converteren..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
+msgctxt "@title"
+msgid "Marketplace"
+msgstr "Marktplaats"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:33
-msgctxt "@info:tooltip"
-msgid "The maximum distance of each pixel from \"Base.\""
-msgstr "De maximale afstand van elke pixel tot de \"Basis\"."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+msgctxt "@label"
+msgid "You need to accept the license to install the package"
+msgstr "U moet de licentie accepteren om de package te installeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:38
-msgctxt "@action:label"
-msgid "Height (mm)"
-msgstr "Hoogte (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
+msgctxt "@title"
+msgid "Changes from your account"
+msgstr "Wijzigingen van uw account"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:56
-msgctxt "@info:tooltip"
-msgid "The base height from the build plate in millimeters."
-msgstr "De basishoogte van het platform in millimeters."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+msgctxt "@button"
+msgid "Dismiss"
+msgstr "Verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:61
-msgctxt "@action:label"
-msgid "Base (mm)"
-msgstr "Basis (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
+msgctxt "@button"
+msgid "Next"
+msgstr "Volgende"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:79
-msgctxt "@info:tooltip"
-msgid "The width in millimeters on the build plate."
-msgstr "De breedte op het platform in millimeters."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
+msgctxt "@label"
+msgid "The following packages will be added:"
+msgstr "De volgende packages worden toegevoegd:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:84
-msgctxt "@action:label"
-msgid "Width (mm)"
-msgstr "Breedte (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+msgctxt "@label"
+msgid "The following packages can not be installed because of an incompatible Cura version:"
+msgstr "De volgende packages kunnen niet worden geïnstalleerd omdat de Cura-versie niet compatibel is:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:103
-msgctxt "@info:tooltip"
-msgid "The depth in millimeters on the build plate"
-msgstr "De diepte op het platform in millimeters"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
+msgctxt "@title:window"
+msgid "Confirm uninstall"
+msgstr "De-installeren bevestigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:108
-msgctxt "@action:label"
-msgid "Depth (mm)"
-msgstr "Diepte (mm)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
+msgctxt "@text:window"
+msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
+msgstr "U verwijdert materialen en/of profielen die nog in gebruik zijn. Wanneer u het verwijderen bevestigt, worden de volgende materialen/profielen teruggezet naar hun standaardinstellingen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:126
-msgctxt "@info:tooltip"
-msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
-msgstr "Bij lithofanen dienen donkere pixels overeen te komen met de dikkere plekken om meer licht tegen te houden. Bij hoogtekaarten geven lichtere pixels hoger terrein aan. Lichtere pixels dienen daarom overeen te komen met dikkere plekken in het gegenereerde 3D-model."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
+msgctxt "@text:window"
+msgid "Materials"
+msgstr "Materialen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Darker is higher"
-msgstr "Donkerder is hoger"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
+msgctxt "@text:window"
+msgid "Profiles"
+msgstr "Profielen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:139
-msgctxt "@item:inlistbox"
-msgid "Lighter is higher"
-msgstr "Lichter is hoger"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
+msgctxt "@action:button"
+msgid "Confirm"
+msgstr "Bevestigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:149
-msgctxt "@info:tooltip"
-msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
-msgstr "Voor lithofanen is een eenvoudig logaritmisch model voor doorschijnendheid beschikbaar. Voor hoogtekaarten corresponderen de pixelwaarden lineair met hoogten."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
+msgctxt "@info"
+msgid "Could not connect to the Cura Package database. Please check your connection."
+msgstr "Kan geen verbinding maken met de Cura Package-database. Controleer uw verbinding."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161
-msgctxt "@item:inlistbox"
-msgid "Linear"
-msgstr "Lineair"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Contributions"
+msgstr "Community-bijdragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:161 /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:172
-msgctxt "@item:inlistbox"
-msgid "Translucency"
-msgstr "Doorschijnendheid"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+msgctxt "@label"
+msgid "Community Plugins"
+msgstr "Community-invoegtoepassingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:171
-msgctxt "@info:tooltip"
-msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
-msgstr "Het percentage licht dat doordringt in een print met een dikte van 1 millimeter. Een lagere waarde verhoogt het contrast in donkere gebieden en verlaagt het contrast in lichte gebieden van de afbeelding."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+msgctxt "@label"
+msgid "Generic Materials"
+msgstr "Standaard materialen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:177
-msgctxt "@action:label"
-msgid "1mm Transmittance (%)"
-msgstr "Transmissie 1 mm (%)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+msgctxt "@label"
+msgid "Version"
+msgstr "Versie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:195
-msgctxt "@info:tooltip"
-msgid "The amount of smoothing to apply to the image."
-msgstr "De mate van effening die op de afbeelding moet worden toegepast."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+msgctxt "@label"
+msgid "Last updated"
+msgstr "Laatst bijgewerkt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:200
-msgctxt "@action:label"
-msgid "Smoothing"
-msgstr "Effenen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+msgctxt "@label"
+msgid "Brand"
+msgstr "Merk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/ImageReader/ConfigUI.qml:227 /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
-msgctxt "@action:button"
-msgid "OK"
-msgstr "OK"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+msgctxt "@label"
+msgid "Downloads"
+msgstr "Downloads"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
 msgctxt "@title:tab"
-msgid "Printer"
-msgstr "Printer"
+msgid "Installed plugins"
+msgstr "Geïnstalleerde plug-ins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
-msgctxt "@title:label"
-msgid "Nozzle Settings"
-msgstr "Nozzle-instellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
+msgctxt "@info"
+msgid "No plugin has been installed."
+msgstr "Er zijn geen plug-ins geïnstalleerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
-msgctxt "@label"
-msgid "Nozzle size"
-msgstr "Maat nozzle"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
+msgctxt "@title:tab"
+msgid "Installed materials"
+msgstr "Geïnstalleerde materialen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265 /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
-msgctxt "@label"
-msgid "mm"
-msgstr "mm"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
+msgctxt "@info"
+msgid "No material has been installed."
+msgstr "Er zijn materialen geïnstalleerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
-msgctxt "@label"
-msgid "Compatible material diameter"
-msgstr "Compatibele materiaaldiameter"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
+msgctxt "@title:tab"
+msgid "Bundled plugins"
+msgstr "Gebundelde plug-ins"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
-msgctxt "@label"
-msgid "Nozzle offset X"
-msgstr "Nozzle-offset X"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
+msgctxt "@title:tab"
+msgid "Bundled materials"
+msgstr "Gebundelde materialen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
 msgctxt "@label"
-msgid "Nozzle offset Y"
-msgstr "Nozzle-offset Y"
+msgid "Website"
+msgstr "Website"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
 msgctxt "@label"
-msgid "Cooling Fan Number"
-msgstr "Nummer van koelventilator"
+msgid "Email"
+msgstr "E-mail"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:162
-msgctxt "@title:label"
-msgid "Extruder Start G-code"
-msgstr "Start-G-code van extruder"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
+msgctxt "@description"
+msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
+msgstr "Meld u aan voor geverifieerde plug-ins en materialen voor Ultimaker Cura Enterprise"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:176
-msgctxt "@title:label"
-msgid "Extruder End G-code"
-msgstr "Eind-G-code van extruder"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:39
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:199
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:53
+msgctxt "@button"
+msgid "Sign in"
+msgstr "Aanmelden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
-msgctxt "@title:label"
-msgid "Printer Settings"
-msgstr "Printerinstellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+msgctxt "@info"
+msgid "Fetching packages..."
+msgstr "Packages ophalen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
 msgctxt "@label"
-msgid "X (Width)"
-msgstr "X (Breedte)"
+msgid "Compatibility"
+msgstr "Compatibiliteit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
-msgctxt "@label"
-msgid "Y (Depth)"
-msgstr "Y (Diepte)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
+msgctxt "@label:table_header"
+msgid "Machine"
+msgstr "Machine"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
-msgctxt "@label"
-msgid "Z (Height)"
-msgstr "Z (Hoogte)"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
+msgctxt "@label:table_header"
+msgid "Build Plate"
+msgstr "Platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
-msgctxt "@label"
-msgid "Build plate shape"
-msgstr "Vorm van het platform"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
+msgctxt "@label:table_header"
+msgid "Support"
+msgstr "Supportstructuur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
-msgctxt "@label"
-msgid "Origin at center"
-msgstr "Centraal oorsprongpunt"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
+msgctxt "@label:table_header"
+msgid "Quality"
+msgstr "Kwaliteit"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
-msgctxt "@label"
-msgid "Heated bed"
-msgstr "Verwarmd bed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
+msgctxt "@action:label"
+msgid "Technical Data Sheet"
+msgstr "Technisch informatieblad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
-msgctxt "@label"
-msgid "Heated build volume"
-msgstr "Verwarmde werkvolume"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
+msgctxt "@action:label"
+msgid "Safety Data Sheet"
+msgstr "Veiligheidsinformatieblad"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
-msgctxt "@label"
-msgid "G-code flavor"
-msgstr "Versie G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
+msgctxt "@action:label"
+msgid "Printing Guidelines"
+msgstr "Richtlijnen voor printen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
-msgctxt "@title:label"
-msgid "Printhead Settings"
-msgstr "Printkopinstellingen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
+msgctxt "@action:label"
+msgid "Website"
+msgstr "Website"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
-msgctxt "@label"
-msgid "X min"
-msgstr "X min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
+msgctxt "@title:tab"
+msgid "Plugins"
+msgstr "Invoegtoepassingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
-msgctxt "@label"
-msgid "Y min"
-msgstr "Y min"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:457
+msgctxt "@title:tab"
+msgid "Materials"
+msgstr "Materialen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
-msgctxt "@label"
-msgid "X max"
-msgstr "X max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
+msgctxt "@title:tab"
+msgid "Installed"
+msgstr "Geïnstalleerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
-msgctxt "@label"
-msgid "Y max"
-msgstr "Y max"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39
+msgctxt "@info:tooltip"
+msgid "Go to Web Marketplace"
+msgstr "Ga naar Marketplace op internet"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
 msgctxt "@label"
-msgid "Gantry Height"
-msgstr "Rijbrughoogte"
+msgid "Will install upon restarting"
+msgstr "Wordt geïnstalleerd na opnieuw starten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
-msgctxt "@label"
-msgid "Number of Extruders"
-msgstr "Aantal extruders"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96
+msgctxt "@action:button"
+msgid "Update"
+msgstr "Bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:374
-msgctxt "@title:label"
-msgid "Start G-code"
-msgstr "Start G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97
+msgctxt "@action:button"
+msgid "Updating"
+msgstr "Bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:385
-msgctxt "@title:label"
-msgid "End G-code"
-msgstr "Eind G-code"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98
+msgctxt "@action:button"
+msgid "Updated"
+msgstr "Bijgewerkt"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:100
-msgctxt "@info"
-msgid ""
-"Please make sure your printer has a connection:\n"
-"- Check if the printer is turned on.\n"
-"- Check if the printer is connected to the network.\n"
-"- Check if you are signed in to discover cloud-connected printers."
-msgstr ""
-"Controleer of de printer verbonden is:\n"
-"- Controleer of de printer ingeschakeld is.\n"
-"- Controleer of de printer verbonden is met het netwerk.\n"
-"- Controleer of u bent aangemeld om met de cloud verbonden printers te detecteren."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to update"
+msgstr "<a href='%1'>Aanmelden</a> is vereist voor het bijwerken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Downgrade"
+msgstr "Downgraden"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
+msgctxt "@action:button"
+msgid "Uninstall"
+msgstr "De-installeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
+msgctxt "@action:button"
+msgid "Installed"
+msgstr "Geïnstalleerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Log in</a> is required to install or update"
+msgstr "<a href='%1'>Aanmelden</a> is vereist voor installeren of bijwerken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
+msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
+msgid "<a href='%1'>Buy material spools</a>"
+msgstr "<a href='%1'>Materiaalspoelen kopen</a>"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
+msgctxt "@label"
+msgid "Premium"
+msgstr "Premium"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
+msgctxt "@label"
+msgid "Search materials"
+msgstr "Materialen zoeken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
 msgctxt "@info"
-msgid "Please connect your printer to the network."
-msgstr "Verbind uw printer met het netwerk."
+msgid "You will need to restart Cura before changes in packages have effect."
+msgstr "U moet Cura opnieuw starten voordat wijzigingen in packages van kracht worden."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/MonitorStage/MonitorMain.qml:155
-msgctxt "@label link to technical assistance"
-msgid "View user manuals online"
-msgstr "Gebruikershandleidingen online weergegeven"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
+msgctxt "@info:button, %1 is the application name"
+msgid "Quit %1"
+msgstr "Sluit %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
+msgctxt "@action:button"
+msgid "Back"
+msgstr "Terug"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+msgctxt "@action:button"
+msgid "Install"
+msgstr "Installeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:42
 msgctxt "@label"
 msgid "Mesh Type"
 msgstr "Rastertype"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:82
 msgctxt "@label"
 msgid "Normal model"
 msgstr "Normaal model"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:94
 msgctxt "@label"
 msgid "Print as support"
 msgstr "Printen als supportstructuur"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:106
 msgctxt "@label"
 msgid "Modify settings for overlaps"
 msgstr "Instellingen aanpassen voor overlapping"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:118
 msgctxt "@label"
 msgid "Don't support overlaps"
 msgstr "Supportstructuur niet laten overlappen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:149
 msgctxt "@item:inlistbox"
 msgid "Infill mesh only"
 msgstr "Alleen vulraster"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:150
 msgctxt "@item:inlistbox"
 msgid "Cutting mesh"
 msgstr "Snijdend raster"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/PerObjectSettingsPanel.qml:380
 msgctxt "@action:button"
 msgid "Select settings"
 msgstr "Instellingen selecteren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:13
 msgctxt "@title:window"
 msgid "Select Settings to Customize for this model"
 msgstr "Instellingen Selecteren om Dit Model Aan te Passen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:94
 msgctxt "@label:textbox"
 msgid "Filter..."
 msgstr "Filteren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PerObjectSettingsTool/SettingPickDialog.qml:68
 msgctxt "@label:checkbox"
 msgid "Show all"
 msgstr "Alles weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:18
 msgctxt "@title:window"
 msgid "Post Processing Plugin"
 msgstr "Invoegtoepassing voor Nabewerking"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:57
 msgctxt "@label"
 msgid "Post Processing Scripts"
 msgstr "Scripts voor Nabewerking"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:233
 msgctxt "@action"
 msgid "Add a script"
 msgstr "Een script toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:279
 msgctxt "@label"
 msgid "Settings"
 msgstr "Instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:499
 msgctxt "@info:tooltip"
 msgid "Change active post-processing scripts."
 msgstr "Actieve scripts voor nabewerking wijzigen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/plugins/PostProcessingPlugin/PostProcessingPlugin.qml:503
 msgctxt "@info:tooltip"
 msgid "The following script is active:"
 msgid_plural "The following scripts are active:"
 msgstr[0] "Het volgende script is actief:"
 msgstr[1] "De volgende scripts zijn actief:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20 /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
 msgctxt "@label"
-msgid "Color scheme"
-msgstr "Kleurenschema"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:107
-msgctxt "@label:listbox"
-msgid "Material Color"
-msgstr "Materiaalkleur"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:111
-msgctxt "@label:listbox"
-msgid "Line Type"
-msgstr "Lijntype"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:115
-msgctxt "@label:listbox"
-msgid "Speed"
-msgstr "Snelheid"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:119
-msgctxt "@label:listbox"
-msgid "Layer thickness"
-msgstr "Laagdikte"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:156
-msgctxt "@label"
-msgid "Compatibility Mode"
-msgstr "Compatibiliteitsmodus"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:230
-msgctxt "@label"
-msgid "Travels"
-msgstr "Bewegingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:236
-msgctxt "@label"
-msgid "Helpers"
-msgstr "Helpers"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:242
-msgctxt "@label"
-msgid "Shell"
-msgstr "Shell"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:248 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
-msgctxt "@label"
-msgid "Infill"
-msgstr "Vulling"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:298
-msgctxt "@label"
-msgid "Only Show Top Layers"
-msgstr "Alleen bovenlagen weergegeven"
+msgid "Queued"
+msgstr "In wachtrij"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:308
-msgctxt "@label"
-msgid "Show 5 Detailed Layers On Top"
-msgstr "5 gedetailleerde lagen bovenaan weergeven"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
+msgctxt "@label link to connect manager"
+msgid "Manage in browser"
+msgstr "Beheren in browser"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:322
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
 msgctxt "@label"
-msgid "Top / Bottom"
-msgstr "Boven-/onderkant"
+msgid "There are no print jobs in the queue. Slice and send a job to add one."
+msgstr "Er staan geen afdruktaken in de wachtrij. Slice een taak en verzend deze om er een toe te voegen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:326
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
 msgctxt "@label"
-msgid "Inner Wall"
-msgstr "Binnenwand"
+msgid "Print jobs"
+msgstr "Printtaken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:384
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
 msgctxt "@label"
-msgid "min"
-msgstr "min."
+msgid "Total print time"
+msgstr "Totale printtijd"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:433
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
 msgctxt "@label"
-msgid "max"
-msgstr "max."
+msgid "Waiting for"
+msgstr "Wachten op"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
 msgctxt "@title:window"
-msgid "More information on anonymous data collection"
-msgstr "Meer informatie over anonieme gegevensverzameling"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
-msgctxt "@text:window"
-msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
-msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren. Hieronder ziet u een voorbeeld van alle gegevens die worden gedeeld:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
-msgctxt "@text:window"
-msgid "I don't want to send anonymous data"
-msgstr "Ik wil geen anonieme gegevens verzenden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
-msgctxt "@text:window"
-msgid "Allow sending anonymous data"
-msgstr "Verzenden van anonieme gegevens toestaan"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxBackColumn.qml:25
-msgctxt "@action:button"
-msgid "Back"
-msgstr "Terug"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:34
-msgctxt "@label"
-msgid "Compatibility"
-msgstr "Compatibiliteit"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:124
-msgctxt "@label:table_header"
-msgid "Machine"
-msgstr "Machine"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:137
-msgctxt "@label:table_header"
-msgid "Build Plate"
-msgstr "Platform"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:143
-msgctxt "@label:table_header"
-msgid "Support"
-msgstr "Supportstructuur"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:149
-msgctxt "@label:table_header"
-msgid "Quality"
-msgstr "Kwaliteit"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:170
-msgctxt "@action:label"
-msgid "Technical Data Sheet"
-msgstr "Technisch informatieblad"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:179
-msgctxt "@action:label"
-msgid "Safety Data Sheet"
-msgstr "Veiligheidsinformatieblad"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:188
-msgctxt "@action:label"
-msgid "Printing Guidelines"
-msgstr "Richtlijnen voor printen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxCompatibilityChart.qml:197
-msgctxt "@action:label"
-msgid "Website"
-msgstr "Website"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:46 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:20
-msgctxt "@action:button"
-msgid "Installed"
-msgstr "Geïnstalleerd"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:56
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to install or update"
-msgstr "<a href='%1'>Aanmelden</a> is vereist voor installeren of bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:80
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Buy material spools</a>"
-msgstr "<a href='%1'>Materiaalspoelen kopen</a>"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:96 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:34
-msgctxt "@action:button"
-msgid "Update"
-msgstr "Bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:97 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:35
-msgctxt "@action:button"
-msgid "Updating"
-msgstr "Bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDetailTileActions.qml:98 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:36
-msgctxt "@action:button"
-msgid "Updated"
-msgstr "Bijgewerkt"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:27
-msgctxt "@label"
-msgid "Premium"
-msgstr "Premium"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:39 /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:86
-msgctxt "@info:tooltip"
-msgid "Go to Web Marketplace"
-msgstr "Ga naar Marketplace op internet"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxDownloadsShowcase.qml:42
-msgctxt "@label"
-msgid "Search materials"
-msgstr "Materialen zoeken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:19
-msgctxt "@info"
-msgid "You will need to restart Cura before changes in packages have effect."
-msgstr "U moet Cura opnieuw starten voordat wijzigingen in packages van kracht worden."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxFooter.qml:46
-msgctxt "@info:button, %1 is the application name"
-msgid "Quit %1"
-msgstr "Sluit %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:30
-msgctxt "@title:tab"
-msgid "Plugins"
-msgstr "Invoegtoepassingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:44 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:466 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:89
-msgctxt "@title:tab"
-msgid "Materials"
-msgstr "Materialen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxHeader.qml:58
-msgctxt "@title:tab"
-msgid "Installed"
-msgstr "Geïnstalleerd"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:22
-msgctxt "@label"
-msgid "Will install upon restarting"
-msgstr "Wordt geïnstalleerd na opnieuw starten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:53
-msgctxt "@label:The string between <a href=> and </a> is the highlighted link"
-msgid "<a href='%1'>Log in</a> is required to update"
-msgstr "<a href='%1'>Aanmelden</a> is vereist voor het bijwerken"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Downgrade"
-msgstr "Downgraden"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxInstalledTileActions.qml:71
-msgctxt "@action:button"
-msgid "Uninstall"
-msgstr "De-installeren"
+msgid "Configuration Changes"
+msgstr "Configuratiewijzigingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/components/ToolboxProgressButton.qml:18
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
 msgctxt "@action:button"
-msgid "Install"
-msgstr "Installeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:14
-msgctxt "@title"
-msgid "Changes from your account"
-msgstr "Wijzigingen van uw account"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23
-msgctxt "@button"
-msgid "Dismiss"
-msgstr "Verwijderen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:23 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:123 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/FirstStartMachineActionsContent.qml:77
-msgctxt "@button"
-msgid "Next"
-msgstr "Volgende"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:52
-msgctxt "@label"
-msgid "The following packages will be added:"
-msgstr "De volgende packages worden toegevoegd:"
+msgid "Override"
+msgstr "Overschrijven"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/CompatibilityDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
 msgctxt "@label"
-msgid "The following packages can not be installed because of an incompatible Cura version:"
-msgstr "De volgende packages kunnen niet worden geïnstalleerd omdat de Cura-versie niet compatibel is:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:20
-msgctxt "@title:window"
-msgid "Confirm uninstall"
-msgstr "De-installeren bevestigen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:50
-msgctxt "@text:window"
-msgid "You are uninstalling materials and/or profiles that are still in use. Confirming will reset the following materials/profiles to their defaults."
-msgstr "U verwijdert materialen en/of profielen die nog in gebruik zijn. Wanneer u het verwijderen bevestigt, worden de volgende materialen/profielen teruggezet naar hun standaardinstellingen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:51
-msgctxt "@text:window"
-msgid "Materials"
-msgstr "Materialen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:52
-msgctxt "@text:window"
-msgid "Profiles"
-msgstr "Profielen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxConfirmUninstallResetDialog.qml:90
-msgctxt "@action:button"
-msgid "Confirm"
-msgstr "Bevestigen"
+msgid "The assigned printer, %1, requires the following configuration change:"
+msgid_plural "The assigned printer, %1, requires the following configuration changes:"
+msgstr[0] "Voor de toegewezen printer, %1, is de volgende configuratiewijziging vereist:"
+msgstr[1] "Voor de toegewezen printer, %1, zijn de volgende configuratiewijzigingen vereist:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/dialogs/ToolboxLicenseDialog.qml:36
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
 msgctxt "@label"
-msgid "You need to accept the license to install the package"
-msgstr "U moet de licentie accepteren om de package te installeren"
+msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
+msgstr "De printer %1 is toegewezen. De taak bevat echter een onbekende materiaalconfiguratie."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:95
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
 msgctxt "@label"
-msgid "Website"
-msgstr "Website"
+msgid "Change material %1 from %2 to %3."
+msgstr "Wijzig het materiaal %1 van %2 in %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxAuthorPage.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
 msgctxt "@label"
-msgid "Email"
-msgstr "E-mail"
+msgid "Load %3 as material %1 (This cannot be overridden)."
+msgstr "Laad %3 als materiaal %1 (kan niet worden overschreven)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
 msgctxt "@label"
-msgid "Version"
-msgstr "Versie"
+msgid "Change print core %1 from %2 to %3."
+msgstr "Wijzig de print core %1 van %2 in %3."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
 msgctxt "@label"
-msgid "Last updated"
-msgstr "Laatst bijgewerkt"
+msgid "Change build plate to %1 (This cannot be overridden)."
+msgstr "Wijzig het platform naar %1 (kan niet worden overschreven)."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:103 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
 msgctxt "@label"
-msgid "Brand"
-msgstr "Merk"
+msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
+msgstr "Met het overschrijven worden de opgegeven instellingen gebruikt met de bestaande printerconfiguratie. De print kan hierdoor mislukken."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDetailPage.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191
 msgctxt "@label"
-msgid "Downloads"
-msgstr "Downloads"
+msgid "Glass"
+msgstr "Glas"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
 msgctxt "@label"
-msgid "Community Contributions"
-msgstr "Community-bijdragen"
+msgid "Aluminum"
+msgstr "Aluminium"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:33
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
 msgctxt "@label"
-msgid "Community Plugins"
-msgstr "Community-invoegtoepassingen"
+msgid "Unavailable printer"
+msgstr "Niet‑beschikbare printer"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxDownloadsPage.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
 msgctxt "@label"
-msgid "Generic Materials"
-msgstr "Standaard materialen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxErrorPage.qml:16
-msgctxt "@info"
-msgid "Could not connect to the Cura Package database. Please check your connection."
-msgstr "Kan geen verbinding maken met de Cura Package-database. Controleer uw verbinding."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:33
-msgctxt "@title:tab"
-msgid "Installed plugins"
-msgstr "Geïnstalleerde plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:72
-msgctxt "@info"
-msgid "No plugin has been installed."
-msgstr "Er zijn geen plug-ins geïnstalleerd."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:86
-msgctxt "@title:tab"
-msgid "Installed materials"
-msgstr "Geïnstalleerde materialen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:125
-msgctxt "@info"
-msgid "No material has been installed."
-msgstr "Er zijn materialen geïnstalleerd."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:139
-msgctxt "@title:tab"
-msgid "Bundled plugins"
-msgstr "Gebundelde plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxInstalledPage.qml:184
-msgctxt "@title:tab"
-msgid "Bundled materials"
-msgstr "Gebundelde materialen"
+msgid "First available"
+msgstr "Eerst beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/ToolboxLoadingPage.qml:17
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:523
 msgctxt "@info"
-msgid "Fetching packages..."
-msgstr "Packages ophalen..."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/pages/WelcomePage.qml:22
-msgctxt "@description"
-msgid "Please sign in to get verified plugins and materials for Ultimaker Cura Enterprise"
-msgstr "Meld u aan voor geverifieerde plug-ins en materialen voor Ultimaker Cura Enterprise"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/Toolbox/resources/qml/Toolbox.qml:19
-msgctxt "@title"
-msgid "Marketplace"
-msgstr "Marktplaats"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
-msgctxt "@title"
-msgid "Build Plate Leveling"
-msgstr "Platform Kalibreren"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
-msgctxt "@label"
-msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
-msgstr "Je kan nu je platform afstellen, zodat uw prints er altijd fantastisch uitzien. Als u op 'Naar de volgende positie bewegen' klikt, beweegt de nozzle naar de verschillende instelbare posities."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
-msgctxt "@label"
-msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
-msgstr "Voor elke positie legt u een stukje papier onder de nozzle en past u de hoogte van het printplatform aan. De hoogte van het printplatform is goed wanneer het papier net door de punt van de nozzle wordt meegenomen."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
-msgctxt "@action:button"
-msgid "Start Build Plate Leveling"
-msgstr "Kalibratie Platform Starten"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
-msgctxt "@action:button"
-msgid "Move to Next Position"
-msgstr "Beweeg Naar de Volgende Positie"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
-msgctxt "@label"
-msgid "Please select any upgrades made to this Ultimaker Original"
-msgstr "Selecteer eventuele upgrades die op deze Ultimaker Original zijn uitgevoerd"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
-msgctxt "@label"
-msgid "Heated Build Plate (official kit or self-built)"
-msgstr "Verwarmd Platform (officiële kit of zelf gebouwd)"
+msgid "Please update your printer's firmware to manage the queue remotely."
+msgstr "Werk de firmware van uw printer bij om de wachtrij op afstand te beheren."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:45
 msgctxt "@title:window"
 msgid "Connect to Networked Printer"
 msgstr "Verbinding Maken met Printer in het Netwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "To print directly to your printer over the network, please make sure your printer is connected to the network using a network cable or by connecting your printer to your WIFI network. If you don't connect Cura with your printer, you can still use a USB drive to transfer g-code files to your printer."
 msgstr "Als u rechtstreeks via het netwerk wilt printen naar de printer, moet u ervoor zorgen dat de printer met een netwerkkabel is verbonden met het netwerk of moet u verbinding maken met de printer via het wifi-netwerk. Als u geen verbinding maakt tussen Cura en de printer, kunt u een USB-station gebruiken om G-code-bestanden naar de printer over te zetten."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:57
 msgctxt "@label"
 msgid "Select your printer from the list below:"
 msgstr "Selecteer uw printer in de onderstaande lijst:"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:77
 msgctxt "@action:button"
 msgid "Edit"
 msgstr "Bewerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:55 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:138
 msgctxt "@action:button"
 msgid "Remove"
 msgstr "Verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:96
 msgctxt "@action:button"
 msgid "Refresh"
 msgstr "Vernieuwen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:176
 msgctxt "@label"
 msgid "If your printer is not listed, read the <a href='%1'>network printing troubleshooting guide</a>"
 msgstr "Raadpleeg de <a href='%1'>handleiding voor probleemoplossing bij printen via het netwerk</a> als uw printer niet in de lijst wordt vermeld"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:263
 msgctxt "@label"
 msgid "Type"
 msgstr "Type"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:279
 msgctxt "@label"
 msgid "Firmware version"
 msgstr "Firmwareversie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:239
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:295
 msgctxt "@label"
 msgid "Address"
 msgstr "Adres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:263
 msgctxt "@label"
 msgid "This printer is not set up to host a group of printers."
 msgstr "Deze printer is niet ingesteld voor het hosten van een groep printers."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:267
 msgctxt "@label"
 msgid "This printer is the host for a group of %1 printers."
 msgstr "Deze printer is de host voor een groep van %1 printers."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:278
 msgctxt "@label"
 msgid "The printer at this address has not yet responded."
 msgstr "De printer op dit adres heeft nog niet gereageerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:283
 msgctxt "@action:button"
 msgid "Connect"
 msgstr "Verbinden"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:296
 msgctxt "@title:window"
 msgid "Invalid IP address"
 msgstr "Ongeldig IP-adres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:297
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:146
 msgctxt "@text"
 msgid "Please enter a valid IP address."
 msgstr "Voer een geldig IP-adres in."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:308
 msgctxt "@title:window"
 msgid "Printer Address"
 msgstr "Printeradres"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:331
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:102
 msgctxt "@label"
 msgid "Enter the IP address of your printer on the network."
 msgstr "Voer het IP-adres van uw printer in het netwerk in."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:20
-msgctxt "@title:window"
-msgid "Configuration Changes"
-msgstr "Configuratiewijzigingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/DiscoverUM3Action.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:227
 msgctxt "@action:button"
-msgid "Override"
-msgstr "Overschrijven"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:85
-msgctxt "@label"
-msgid "The assigned printer, %1, requires the following configuration change:"
-msgid_plural "The assigned printer, %1, requires the following configuration changes:"
-msgstr[0] "Voor de toegewezen printer, %1, is de volgende configuratiewijziging vereist:"
-msgstr[1] "Voor de toegewezen printer, %1, zijn de volgende configuratiewijzigingen vereist:"
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:89
-msgctxt "@label"
-msgid "The printer %1 is assigned, but the job contains an unknown material configuration."
-msgstr "De printer %1 is toegewezen. De taak bevat echter een onbekende materiaalconfiguratie."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:99
-msgctxt "@label"
-msgid "Change material %1 from %2 to %3."
-msgstr "Wijzig het materiaal %1 van %2 in %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:102
-msgctxt "@label"
-msgid "Load %3 as material %1 (This cannot be overridden)."
-msgstr "Laad %3 als materiaal %1 (kan niet worden overschreven)."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:105
-msgctxt "@label"
-msgid "Change print core %1 from %2 to %3."
-msgstr "Wijzig de print core %1 van %2 in %3."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:108
-msgctxt "@label"
-msgid "Change build plate to %1 (This cannot be overridden)."
-msgstr "Wijzig het platform naar %1 (kan niet worden overschreven)."
+msgid "OK"
+msgstr "OK"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:115
-msgctxt "@label"
-msgid "Override will use the specified settings with the existing printer configuration. This may result in a failed print."
-msgstr "Met het overschrijven worden de opgegeven instellingen gebruikt met de bestaande printerconfiguratie. De print kan hierdoor mislukken."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
+msgctxt "@title:window"
+msgid "Print over network"
+msgstr "Printen via netwerk"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:153 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:191 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:184
-msgctxt "@label"
-msgid "Glass"
-msgstr "Glas"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
+msgctxt "@action:button"
+msgid "Print"
+msgstr "Printen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorConfigOverrideDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
 msgctxt "@label"
-msgid "Aluminum"
-msgstr "Aluminium"
+msgid "Printer selection"
+msgstr "Printerselectie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:54
 msgctxt "@label"
 msgid "Move to top"
 msgstr "Plaats bovenaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:70
 msgctxt "@label"
 msgid "Delete"
 msgstr "Verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:289
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:100
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:290
 msgctxt "@label"
 msgid "Resume"
 msgstr "Hervatten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:102
 msgctxt "@label"
 msgid "Pausing..."
 msgstr "Pauzeren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:104
 msgctxt "@label"
 msgid "Resuming..."
 msgstr "Hervatten..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:284 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:293
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:106
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:294
 msgctxt "@label"
 msgid "Pause"
 msgstr "Pauzeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Aborting..."
 msgstr "Afbreken..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:124
 msgctxt "@label"
 msgid "Abort"
 msgstr "Afbreken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:143
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to move %1 to the top of the queue?"
 msgstr "Weet u zeker dat u %1 bovenaan de wachtrij wilt plaatsen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:144
 msgctxt "@window:title"
 msgid "Move print job to top"
 msgstr "Plaats printtaak bovenaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:153
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to delete %1?"
 msgstr "Weet u zeker dat u %1 wilt verwijderen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:154
 msgctxt "@window:title"
 msgid "Delete print job"
 msgstr "Printtaak verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:163
 msgctxt "@label %1 is the name of a print job."
 msgid "Are you sure you want to abort %1?"
 msgstr "Weet u zeker dat u %1 wilt afbreken?"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164 /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorContextMenu.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:336
 msgctxt "@window:title"
 msgid "Abort print"
 msgstr "Printen afbreken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
+msgctxt "@label:status"
+msgid "Aborted"
+msgstr "Afgebroken"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
+msgctxt "@label:status"
+msgid "Finished"
+msgstr "Gereed"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:364
+msgctxt "@label:status"
+msgid "Preparing..."
+msgstr "Voorbereiden..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
+msgctxt "@label:status"
+msgid "Aborting..."
+msgstr "Afbreken..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
+msgctxt "@label:status"
+msgid "Pausing..."
+msgstr "Pauzeren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
+msgctxt "@label:status"
+msgid "Paused"
+msgstr "Gepauzeerd"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
+msgctxt "@label:status"
+msgid "Resuming..."
+msgstr "Hervatten..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
+msgctxt "@label:status"
+msgid "Action required"
+msgstr "Handeling nodig"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
+msgctxt "@label:status"
+msgid "Finishes %1 at %2"
+msgstr "Voltooit %1 om %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:154
 msgctxt "@label link to Connect and Cloud interfaces"
 msgid "Manage printer"
 msgstr "Printer beheren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:254 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:519 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:250
-msgctxt "@info"
-msgid "Please update your printer's firmware to manage the queue remotely."
-msgstr "Werk de firmware van uw printer bij om de wachtrij op afstand te beheren."
-
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:348
 msgctxt "@label:status"
 msgid "Loading..."
 msgstr "Laden..."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:352
 msgctxt "@label:status"
 msgid "Unavailable"
 msgstr "Niet beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:356
 msgctxt "@label:status"
 msgid "Unreachable"
 msgstr "Onbereikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:360
 msgctxt "@label:status"
 msgid "Idle"
 msgstr "Inactief"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:369
 msgctxt "@label:status"
 msgid "Printing"
 msgstr "Printen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:410
 msgctxt "@label"
 msgid "Untitled"
 msgstr "Zonder titel"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:427
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:431
 msgctxt "@label"
 msgid "Anonymous"
 msgstr "Anoniem"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:458
 msgctxt "@label:status"
 msgid "Requires configuration changes"
 msgstr "Hiervoor zijn configuratiewijzigingen vereist"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:492
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrinterCard.qml:496
 msgctxt "@action:button"
 msgid "Details"
 msgstr "Details"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:133
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:30
 msgctxt "@label"
-msgid "Unavailable printer"
-msgstr "Niet‑beschikbare printer"
+msgid "Please select any upgrades made to this Ultimaker Original"
+msgstr "Selecteer eventuele upgrades die op deze Ultimaker Original zijn uitgevoerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobCard.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/UMOUpgradeSelectionMachineAction.qml:41
 msgctxt "@label"
-msgid "First available"
-msgstr "Eerst beschikbaar"
+msgid "Heated Build Plate (official kit or self-built)"
+msgstr "Verwarmd Platform (officiële kit of zelf gebouwd)"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:78 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:90
-msgctxt "@label:status"
-msgid "Aborted"
-msgstr "Afgebroken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:30
+msgctxt "@title"
+msgid "Build Plate Leveling"
+msgstr "Platform Kalibreren"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:80 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:82
-msgctxt "@label:status"
-msgid "Finished"
-msgstr "Gereed"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:44
+msgctxt "@label"
+msgid "To make sure your prints will come out great, you can now adjust your buildplate. When you click 'Move to Next Position' the nozzle will move to the different positions that can be adjusted."
+msgstr "Je kan nu je platform afstellen, zodat uw prints er altijd fantastisch uitzien. Als u op 'Naar de volgende positie bewegen' klikt, beweegt de nozzle naar de verschillende instelbare posities."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:84 /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:86
-msgctxt "@label:status"
-msgid "Preparing..."
-msgstr "Voorbereiden..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:57
+msgctxt "@label"
+msgid "For every position; insert a piece of paper under the nozzle and adjust the print build plate height. The print build plate height is right when the paper is slightly gripped by the tip of the nozzle."
+msgstr "Voor elke positie legt u een stukje papier onder de nozzle en past u de hoogte van het printplatform aan. De hoogte van het printplatform is goed wanneer het papier net door de punt van de nozzle wordt meegenomen."
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:88
-msgctxt "@label:status"
-msgid "Aborting..."
-msgstr "Afbreken..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:75
+msgctxt "@action:button"
+msgid "Start Build Plate Leveling"
+msgstr "Kalibratie Platform Starten"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:92
-msgctxt "@label:status"
-msgid "Pausing..."
-msgstr "Pauzeren..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/UltimakerMachineActions/BedLevelMachineAction.qml:87
+msgctxt "@action:button"
+msgid "Move to Next Position"
+msgstr "Beweeg Naar de Volgende Positie"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:94
-msgctxt "@label:status"
-msgid "Paused"
-msgstr "Gepauzeerd"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:15
+msgctxt "@title:window"
+msgid "Open Project"
+msgstr "Project openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:96
-msgctxt "@label:status"
-msgid "Resuming..."
-msgstr "Hervatten..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:62
+msgctxt "@action:ComboBox Update/override existing profile"
+msgid "Update existing"
+msgstr "Bestaand(e) bijwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:98
-msgctxt "@label:status"
-msgid "Action required"
-msgstr "Handeling nodig"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:63
+msgctxt "@action:ComboBox Save settings in a new profile"
+msgid "Create new"
+msgstr "Nieuw maken"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobProgressBar.qml:100
-msgctxt "@label:status"
-msgid "Finishes %1 at %2"
-msgstr "Voltooit %1 om %2"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:75
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:69
+msgctxt "@action:title"
+msgid "Summary - Cura Project"
+msgstr "Samenvatting - Cura-project"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:97
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:93
+msgctxt "@action:label"
+msgid "Printer settings"
+msgstr "Printerinstellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:113
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the machine be resolved?"
+msgstr "Hoe dient het conflict in de machine te worden opgelost?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:167
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:102
+msgctxt "@action:label"
+msgid "Type"
+msgstr "Type"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:183
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+msgctxt "@action:label"
+msgid "Printer Group"
+msgstr "Printergroep"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:218
+msgctxt "@action:label"
+msgid "Profile settings"
+msgstr "Profielinstellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:221
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the profile be resolved?"
+msgstr "Hoe dient het conflict in het profiel te worden opgelost?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:242
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:353
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:242
+msgctxt "@action:label"
+msgid "Name"
+msgstr "Naam"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:258
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:259
+msgctxt "@action:label"
+msgid "Intent"
+msgstr "Intent"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:274
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:226
+msgctxt "@action:label"
+msgid "Not in profile"
+msgstr "Niet in profiel"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:279
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:231
+msgctxt "@action:label"
+msgid "%1 override"
+msgid_plural "%1 overrides"
+msgstr[0] "%1 overschrijving"
+msgstr[1] "%1 overschrijvingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:290
+msgctxt "@action:label"
+msgid "Derivative from"
+msgstr "Afgeleide van"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:295
+msgctxt "@action:label"
+msgid "%1, %2 override"
+msgid_plural "%1, %2 overrides"
+msgstr[0] "%1, %2 overschrijving"
+msgstr[1] "%1, %2 overschrijvingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:312
+msgctxt "@action:label"
+msgid "Material settings"
+msgstr "Materiaalinstellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:328
+msgctxt "@info:tooltip"
+msgid "How should the conflict in the material be resolved?"
+msgstr "Hoe dient het materiaalconflict te worden opgelost?"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:373
+msgctxt "@action:label"
+msgid "Setting visibility"
+msgstr "Zichtbaarheid instellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:382
+msgctxt "@action:label"
+msgid "Mode"
+msgstr "Modus"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:398
+msgctxt "@action:label"
+msgid "Visible settings:"
+msgstr "Zichtbare instellingen:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:403
+msgctxt "@action:label"
+msgid "%1 out of %2"
+msgstr "%1 van %2"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:429
+msgctxt "@action:warning"
+msgid "Loading a project will clear all models on the build plate."
+msgstr "Als u een project laadt, worden alle modellen van het platform gewist."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/3MFReader/WorkspaceDialog.qml:457
+msgctxt "@action:button"
+msgid "Open"
+msgstr "Openen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ModelChecker/ModelChecker.qml:22
+msgctxt "@info:tooltip"
+msgid "Some things could be problematic in this print. Click to see tips for adjustment."
+msgstr "In deze print kunnen problemen ontstaan. Klik om tips voor aanpassingen te bekijken."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:100
+msgctxt "@info"
+msgid ""
+"Please make sure your printer has a connection:\n"
+"- Check if the printer is turned on.\n"
+"- Check if the printer is connected to the network.\n"
+"- Check if you are signed in to discover cloud-connected printers."
+msgstr ""
+"Controleer of de printer verbonden is:\n"
+"- Controleer of de printer ingeschakeld is.\n"
+"- Controleer of de printer verbonden is met het netwerk.\n"
+"- Controleer of u bent aangemeld om met de cloud verbonden printers te detecteren."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:117
+msgctxt "@info"
+msgid "Please connect your printer to the network."
+msgstr "Verbind uw printer met het netwerk."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MonitorStage/MonitorMain.qml:155
+msgctxt "@label link to technical assistance"
+msgid "View user manuals online"
+msgstr "Gebruikershandleidingen online weergegeven"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:17
+msgctxt "@title:window"
+msgid "More information on anonymous data collection"
+msgstr "Meer informatie over anonieme gegevensverzameling"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:74
+msgctxt "@text:window"
+msgid "Ultimaker Cura collects anonymous data in order to improve the print quality and user experience. Below is an example of all the data that is shared:"
+msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren. Hieronder ziet u een voorbeeld van alle gegevens die worden gedeeld:"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:110
+msgctxt "@text:window"
+msgid "I don't want to send anonymous data"
+msgstr "Ik wil geen anonieme gegevens verzenden"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SliceInfoPlugin/MoreInfoWindow.qml:119
+msgctxt "@text:window"
+msgid "Allow sending anonymous data"
+msgstr "Verzenden van anonieme gegevens toestaan"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:49
 msgctxt "@label"
-msgid "Queued"
-msgstr "In wachtrij"
+msgid "Color scheme"
+msgstr "Kleurenschema"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:66
-msgctxt "@label link to connect manager"
-msgid "Manage in browser"
-msgstr "Beheren in browser"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:109
+msgctxt "@label:listbox"
+msgid "Material Color"
+msgstr "Materiaalkleur"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:113
+msgctxt "@label:listbox"
+msgid "Line Type"
+msgstr "Lijntype"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:117
+msgctxt "@label:listbox"
+msgid "Speed"
+msgstr "Snelheid"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:121
+msgctxt "@label:listbox"
+msgid "Layer Thickness"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:125
+msgctxt "@label:listbox"
+msgid "Line Width"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:163
 msgctxt "@label"
-msgid "There are no print jobs in the queue. Slice and send a job to add one."
-msgstr "Er staan geen afdruktaken in de wachtrij. Slice een taak en verzend deze om er een toe te voegen."
+msgid "Compatibility Mode"
+msgstr "Compatibiliteitsmodus"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:110
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:237
 msgctxt "@label"
-msgid "Print jobs"
-msgstr "Printtaken"
+msgid "Travels"
+msgstr "Bewegingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:122
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:243
 msgctxt "@label"
-msgid "Total print time"
-msgstr "Totale printtijd"
+msgid "Helpers"
+msgstr "Helpers"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/MonitorQueue.qml:134
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:249
 msgctxt "@label"
-msgid "Waiting for"
-msgstr "Wachten op"
+msgid "Shell"
+msgstr "Shell"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:11
-msgctxt "@title:window"
-msgid "Print over network"
-msgstr "Printen via netwerk"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:255
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:65
+msgctxt "@label"
+msgid "Infill"
+msgstr "Vulling"
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:52
-msgctxt "@action:button"
-msgid "Print"
-msgstr "Printen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:263
+msgctxt "@label"
+msgid "Starts"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/plugins/UM3NetworkPrinting/resources/qml/PrintWindow.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:314
 msgctxt "@label"
-msgid "Printer selection"
-msgstr "Printerselectie"
+msgid "Only Show Top Layers"
+msgstr "Alleen bovenlagen weergegeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/AccountWidget.qml:24
-msgctxt "@action:button"
-msgid "Sign in"
-msgstr "Aanmelden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:324
+msgctxt "@label"
+msgid "Show 5 Detailed Layers On Top"
+msgstr "5 gedetailleerde lagen bovenaan weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:338
 msgctxt "@label"
-msgid "Your key to connected 3D printing"
-msgstr "Uw sleutel tot verbonden 3D-printen"
+msgid "Top / Bottom"
+msgstr "Boven-/onderkant"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:51
-msgctxt "@text"
-msgid ""
-"- Customize your experience with more print profiles and plugins\n"
-"- Stay flexible by syncing your setup and loading it anywhere\n"
-"- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr ""
-"- Pas uw ervaring aan met meer printprofielen en plug-ins\n"
-"- Blijf flexibel door uw instellingen te synchroniseren en overal te laden\n"
-"- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:342
+msgctxt "@label"
+msgid "Inner Wall"
+msgstr "Binnenwand"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/GeneralOperations.qml:78 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:142
-msgctxt "@button"
-msgid "Create account"
-msgstr "Account maken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:405
+msgctxt "@label"
+msgid "min"
+msgstr "min."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:28
+#: /mnt/projects/ultimaker/cura/Cura/plugins/SimulationView/SimulationViewMenuComponent.qml:464
 msgctxt "@label"
-msgid "Checking..."
-msgstr "Aan het controleren..."
+msgid "max"
+msgstr "max."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:63
+msgctxt "@title:label"
+msgid "Nozzle Settings"
+msgstr "Nozzle-instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:35
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:75
 msgctxt "@label"
-msgid "Account synced"
-msgstr "Account gesynchroniseerd"
+msgid "Nozzle size"
+msgstr "Maat nozzle"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:79
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:93
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:109
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:74
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:89
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:205
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:225
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:245
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:265
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:283
 msgctxt "@label"
-msgid "Something went wrong..."
-msgstr "Er is een fout opgetreden..."
+msgid "mm"
+msgstr "mm"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:96
-msgctxt "@button"
-msgid "Install pending updates"
-msgstr "Updates in afwachting installeren"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:89
+msgctxt "@label"
+msgid "Compatible material diameter"
+msgstr "Compatibele materiaaldiameter"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/SyncState.qml:118
-msgctxt "@button"
-msgid "Check for account updates"
-msgstr "Controleren op accountupdates"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:105
+msgctxt "@label"
+msgid "Nozzle offset X"
+msgstr "Nozzle-offset X"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:81
-msgctxt "@label The argument is a timestamp"
-msgid "Last update: %1"
-msgstr "Laatste update: %1"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:120
+msgctxt "@label"
+msgid "Nozzle offset Y"
+msgstr "Nozzle-offset Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:109
-msgctxt "@button"
-msgid "Ultimaker Account"
-msgstr "Ultimaker-account"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:135
+msgctxt "@label"
+msgid "Cooling Fan Number"
+msgstr "Nummer van koelventilator"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Account/UserOperations.qml:125
-msgctxt "@button"
-msgid "Sign Out"
-msgstr "Afmelden"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:163
+msgctxt "@title:label"
+msgid "Extruder Start G-code"
+msgstr "Start-G-code van extruder"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsExtruderTab.qml:177
+msgctxt "@title:label"
+msgid "Extruder End G-code"
+msgstr "Eind-G-code van extruder"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsAction.qml:42
+msgctxt "@title:tab"
+msgid "Printer"
+msgstr "Printer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:56
+msgctxt "@title:label"
+msgid "Printer Settings"
+msgstr "Printerinstellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:70
 msgctxt "@label"
-msgid "No time estimation available"
-msgstr "Geen tijdschatting beschikbaar"
+msgid "X (Width)"
+msgstr "X (Breedte)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:85
 msgctxt "@label"
-msgid "No cost estimation available"
-msgstr "Geen kostenraming beschikbaar"
+msgid "Y (Depth)"
+msgstr "Y (Diepte)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
-msgctxt "@button"
-msgid "Preview"
-msgstr "Voorbeeld"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:100
+msgctxt "@label"
+msgid "Z (Height)"
+msgstr "Z (Hoogte)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:114
 msgctxt "@label"
-msgid "Time estimation"
-msgstr "Tijdschatting"
+msgid "Build plate shape"
+msgstr "Vorm van het platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:127
 msgctxt "@label"
-msgid "Material estimation"
-msgstr "Materiaalschatting"
+msgid "Origin at center"
+msgstr "Centraal oorsprongpunt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
-msgctxt "@label m for meter"
-msgid "%1m"
-msgstr "%1 m"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:139
+msgctxt "@label"
+msgid "Heated bed"
+msgstr "Verwarmd bed"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
-msgctxt "@label g for grams"
-msgid "%1g"
-msgstr "%1 g"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:151
+msgctxt "@label"
+msgid "Heated build volume"
+msgstr "Verwarmde werkvolume"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
-msgctxt "@label:PrintjobStatus"
-msgid "Slicing..."
-msgstr "Slicen..."
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:163
+msgctxt "@label"
+msgid "G-code flavor"
+msgstr "Versie G-code"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
-msgctxt "@label:PrintjobStatus"
-msgid "Unable to slice"
-msgstr "Kan niet slicen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:187
+msgctxt "@title:label"
+msgid "Printhead Settings"
+msgstr "Printkopinstellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:201
+msgctxt "@label"
+msgid "X min"
+msgstr "X min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:221
+msgctxt "@label"
+msgid "Y min"
+msgstr "Y min"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:241
+msgctxt "@label"
+msgid "X max"
+msgstr "X max"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:261
+msgctxt "@label"
+msgid "Y max"
+msgstr "Y max"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:279
+msgctxt "@label"
+msgid "Gantry Height"
+msgstr "Rijbrughoogte"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:293
+msgctxt "@label"
+msgid "Number of Extruders"
+msgstr "Aantal extruders"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:345
+msgctxt "@label"
+msgid "Apply Extruder offsets to GCode"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:393
+msgctxt "@title:label"
+msgid "Start G-code"
+msgstr "Start G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/MachineSettingsAction/MachineSettingsPrinterTab.qml:404
+msgctxt "@title:label"
+msgid "End G-code"
+msgstr "Eind G-code"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:19
+msgctxt "@title:window"
+msgid "Convert Image..."
+msgstr "Afbeelding Converteren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:33
+msgctxt "@info:tooltip"
+msgid "The maximum distance of each pixel from \"Base.\""
+msgstr "De maximale afstand van elke pixel tot de \"Basis\"."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:38
+msgctxt "@action:label"
+msgid "Height (mm)"
+msgstr "Hoogte (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:56
+msgctxt "@info:tooltip"
+msgid "The base height from the build plate in millimeters."
+msgstr "De basishoogte van het platform in millimeters."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:61
+msgctxt "@action:label"
+msgid "Base (mm)"
+msgstr "Basis (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:79
+msgctxt "@info:tooltip"
+msgid "The width in millimeters on the build plate."
+msgstr "De breedte op het platform in millimeters."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:84
+msgctxt "@action:label"
+msgid "Width (mm)"
+msgstr "Breedte (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:103
+msgctxt "@info:tooltip"
+msgid "The depth in millimeters on the build plate"
+msgstr "De diepte op het platform in millimeters"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:108
+msgctxt "@action:label"
+msgid "Depth (mm)"
+msgstr "Diepte (mm)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:126
+msgctxt "@info:tooltip"
+msgid "For lithophanes dark pixels should correspond to thicker locations in order to block more light coming through. For height maps lighter pixels signify higher terrain, so lighter pixels should correspond to thicker locations in the generated 3D model."
+msgstr "Bij lithofanen dienen donkere pixels overeen te komen met de dikkere plekken om meer licht tegen te houden. Bij hoogtekaarten geven lichtere pixels hoger terrein aan. Lichtere pixels dienen daarom overeen te komen met dikkere plekken in het gegenereerde 3D-model."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Darker is higher"
+msgstr "Donkerder is hoger"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:139
+msgctxt "@item:inlistbox"
+msgid "Lighter is higher"
+msgstr "Lichter is hoger"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:149
+msgctxt "@info:tooltip"
+msgid "For lithophanes a simple logarithmic model for translucency is available. For height maps the pixel values correspond to heights linearly."
+msgstr "Voor lithofanen is een eenvoudig logaritmisch model voor doorschijnendheid beschikbaar. Voor hoogtekaarten corresponderen de pixelwaarden lineair met hoogten."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+msgctxt "@item:inlistbox"
+msgid "Linear"
+msgstr "Lineair"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:172
+msgctxt "@item:inlistbox"
+msgid "Translucency"
+msgstr "Doorschijnendheid"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:171
+msgctxt "@info:tooltip"
+msgid "The percentage of light penetrating a print with a thickness of 1 millimeter. Lowering this value increases the contrast in dark regions and decreases the contrast in light regions of the image."
+msgstr "Het percentage licht dat doordringt in een print met een dikte van 1 millimeter. Een lagere waarde verhoogt het contrast in donkere gebieden en verlaagt het contrast in lichte gebieden van de afbeelding."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:177
+msgctxt "@action:label"
+msgid "1mm Transmittance (%)"
+msgstr "Transmissie 1 mm (%)"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:195
+msgctxt "@info:tooltip"
+msgid "The amount of smoothing to apply to the image."
+msgstr "De mate van effening die op de afbeelding moet worden toegepast."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/ImageReader/ConfigUI.qml:200
+msgctxt "@action:label"
+msgid "Smoothing"
+msgstr "Effenen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:28
+msgctxt "@title"
+msgid "My Backups"
+msgstr "Mijn back-ups"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:38
+msgctxt "@empty_state"
+msgid "You don't have any backups currently. Use the 'Backup Now' button to create one."
+msgstr "U hebt momenteel geen back-ups. Gebruik de knop 'Nu back-up maken' om een back-up te maken."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/BackupsPage.qml:60
+msgctxt "@backup_limit_info"
+msgid "During the preview phase, you'll be limited to 5 visible backups. Remove a backup to see older ones."
+msgstr "Tijdens de voorbeeldfase zijn er maximaal 5 back-ups zichtbaar. Verwijder een back-up als u oudere back-ups wilt bekijken."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/pages/WelcomePage.qml:34
+msgctxt "@description"
+msgid "Backup and synchronize your Cura settings."
+msgstr "Maak een back-up van uw Cura-instellingen en synchroniseer deze."
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:22
 msgctxt "@button"
-msgid "Processing"
-msgstr "Verwerken"
+msgid "Want more?"
+msgstr "Wilt u meer?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:31
 msgctxt "@button"
-msgid "Slice"
-msgstr "Slicen"
+msgid "Backup Now"
+msgstr "Nu back-up maken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
-msgctxt "@label"
-msgid "Start the slicing process"
-msgstr "Het sliceproces starten"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:43
+msgctxt "@checkbox:description"
+msgid "Auto Backup"
+msgstr "Auto back-up"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListFooter.qml:44
+msgctxt "@checkbox:description"
+msgid "Automatically create a backup each day that Cura is started."
+msgstr "Maak elke dag dat Cura wordt gestart, automatisch een back-up."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:21
+msgctxt "@backuplist:label"
+msgid "Cura Version"
+msgstr "Cura-versie"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:29
+msgctxt "@backuplist:label"
+msgid "Machines"
+msgstr "Machines"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:37
+msgctxt "@backuplist:label"
+msgid "Materials"
+msgstr "Materialen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:45
+msgctxt "@backuplist:label"
+msgid "Profiles"
+msgstr "Profielen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItemDetails.qml:53
+msgctxt "@backuplist:label"
+msgid "Plugins"
+msgstr "Invoegtoepassingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:71
 msgctxt "@button"
-msgid "Cancel"
-msgstr "Annuleren"
+msgid "Restore"
+msgstr "Herstellen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:82
-msgctxt "@action:inmenu"
-msgid "Show Online Troubleshooting Guide"
-msgstr "Online gids voor probleemoplossing weergegeven"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:99
+msgctxt "@dialog:title"
+msgid "Delete Backup"
+msgstr "Back-up verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:89
-msgctxt "@action:inmenu"
-msgid "Toggle Full Screen"
-msgstr "Volledig Scherm In-/Uitschakelen"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:100
+msgctxt "@dialog:info"
+msgid "Are you sure you want to delete this backup? This cannot be undone."
+msgstr "Weet u zeker dat u deze back-up wilt verwijderen? Dit kan niet ongedaan worden gemaakt."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:97
-msgctxt "@action:inmenu"
-msgid "Exit Full Screen"
-msgstr "Volledig scherm sluiten"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:108
+msgctxt "@dialog:title"
+msgid "Restore Backup"
+msgstr "Back-up herstellen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:104
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Undo"
-msgstr "Ongedaan &Maken"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/components/BackupListItem.qml:109
+msgctxt "@dialog:info"
+msgid "You will need to restart Cura before your backup is restored. Do you want to close Cura now?"
+msgstr "U moet Cura opnieuw starten voordat uw back-up wordt hersteld. Wilt u Cura nu sluiten?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:114
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Redo"
-msgstr "&Opnieuw"
+#: /mnt/projects/ultimaker/cura/Cura/plugins/CuraDrive/src/qml/main.qml:25
+msgctxt "@title:window"
+msgid "Cura Backups"
+msgstr "Cura-back-ups"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:13
+msgctxt "@label:category menu label"
+msgid "Material"
+msgstr "Materiaal"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:54
+msgctxt "@label:category menu label"
+msgid "Favorites"
+msgstr "Favorieten"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/MaterialMenu.qml:79
+msgctxt "@label:category menu label"
+msgid "Generic"
+msgstr "Standaard"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:124
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27
+msgctxt "@title:menu menubar:toplevel"
+msgid "&File"
+msgstr "&Bestand"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:41
+msgctxt "@title:menu menubar:file"
+msgid "&Save Project..."
+msgstr "&Project opslaan..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:74
+msgctxt "@title:menu menubar:file"
+msgid "&Export..."
+msgstr "&Exporteren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/FileMenu.qml:85
 msgctxt "@action:inmenu menubar:file"
-msgid "&Quit"
-msgstr "&Afsluiten"
+msgid "Export Selection..."
+msgstr "Selectie Exporteren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:132
-msgctxt "@action:inmenu menubar:view"
-msgid "3D View"
-msgstr "3D-weergave"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open &Recent"
+msgstr "&Recente bestanden openen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+msgctxt "@label"
+msgid "Select configuration"
+msgstr "Configuratie selecteren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:139
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+msgctxt "@label"
+msgid "Configurations"
+msgstr "Configuraties"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
+msgctxt "@header"
+msgid "Configurations"
+msgstr "Configuraties"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
+msgctxt "@header"
+msgid "Custom"
+msgstr "Aangepast"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+msgctxt "@label"
+msgid "Printer"
+msgstr "Printer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+msgctxt "@label"
+msgid "Enabled"
+msgstr "Ingeschakeld"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+msgctxt "@label"
+msgid "Material"
+msgstr "Materiaal"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+msgctxt "@label"
+msgid "Use glue for better adhesion with this material combination."
+msgstr "Gebruik lijm bij deze combinatie van materialen voor een betere hechting."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+msgctxt "@label"
+msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
+msgstr "Deze configuratie is niet beschikbaar omdat %1 niet wordt herkend. Ga naar %2 om het juiste materiaalprofiel te downloaden."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+msgctxt "@label"
+msgid "Marketplace"
+msgstr "Marktplaats"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+msgctxt "@label"
+msgid "Loading available configurations from the printer..."
+msgstr "Beschikbare configuraties laden vanaf de printer..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+msgctxt "@label"
+msgid "The configurations are not available because the printer is disconnected."
+msgstr "De configuraties zijn niet beschikbaar omdat de printer niet verbonden is."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:12
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49
+msgctxt "@title:menu menubar:toplevel"
+msgid "&View"
+msgstr "Beel&d"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:19
 msgctxt "@action:inmenu menubar:view"
-msgid "Front View"
-msgstr "Weergave voorzijde"
+msgid "&Camera position"
+msgstr "&Camerapositie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:44
 msgctxt "@action:inmenu menubar:view"
-msgid "Top View"
-msgstr "Weergave bovenzijde"
+msgid "Camera view"
+msgstr "Camerabeeld"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:47
 msgctxt "@action:inmenu menubar:view"
-msgid "Left Side View"
-msgstr "Weergave linkerzijde"
+msgid "Perspective"
+msgstr "Perspectief"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:59
 msgctxt "@action:inmenu menubar:view"
-msgid "Right Side View"
-msgstr "Weergave rechterzijde"
+msgid "Orthographic"
+msgstr "Orthografisch"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:167
-msgctxt "@action:inmenu"
-msgid "Configure Cura..."
-msgstr "Cura Configureren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ViewMenu.qml:80
+msgctxt "@action:inmenu menubar:view"
+msgid "&Build plate"
+msgstr "&Platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:174
-msgctxt "@action:inmenu menubar:printer"
-msgid "&Add Printer..."
-msgstr "&Printer Toevoegen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:25
+msgctxt "@label:category menu label"
+msgid "Network enabled printers"
+msgstr "Netwerkprinters"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:180
-msgctxt "@action:inmenu menubar:printer"
-msgid "Manage Pr&inters..."
-msgstr "Pr&inters Beheren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/PrinterMenu.qml:42
+msgctxt "@label:category menu label"
+msgid "Local printers"
+msgstr "Lokale printers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:187
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
 msgctxt "@action:inmenu"
-msgid "Manage Materials..."
-msgstr "Materialen Beheren..."
+msgid "Visible Settings"
+msgstr "Zichtbare instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:195
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
 msgctxt "@action:inmenu"
-msgid "Add more materials from Marketplace"
-msgstr "Meer materialen toevoegen van Marketplace"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:202
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Update profile with current settings/overrides"
-msgstr "Profiel bijwerken met h&uidige instellingen/overschrijvingen"
+msgid "Collapse All Categories"
+msgstr "Alle categorieën samenvouwen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:210
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Discard current changes"
-msgstr "Hui&dige wijzigingen verwijderen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+msgctxt "@action:inmenu"
+msgid "Manage Setting Visibility..."
+msgstr "Instelling voor zichtbaarheid beheren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:222
-msgctxt "@action:inmenu menubar:profile"
-msgid "&Create profile from current settings/overrides..."
-msgstr "Profiel maken op basis van huidige instellingen/overs&chrijvingen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Settings"
+msgstr "In&stellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:228
-msgctxt "@action:inmenu menubar:profile"
-msgid "Manage Profiles..."
-msgstr "Profielen Beheren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:15
+msgctxt "@title:menu menubar:settings"
+msgid "&Printer"
+msgstr "&Printer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:236
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Online &Documentation"
-msgstr "Online &Documentatie Weergeven"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:29
+msgctxt "@title:menu"
+msgid "&Material"
+msgstr "&Materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:244
-msgctxt "@action:inmenu menubar:help"
-msgid "Report a &Bug"
-msgstr "Een &Bug Rapporteren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:44
+msgctxt "@action:inmenu"
+msgid "Set as Active Extruder"
+msgstr "Instellen als Actieve Extruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:252
-msgctxt "@action:inmenu menubar:help"
-msgid "What's New"
-msgstr "Nieuwe functies"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:50
+msgctxt "@action:inmenu"
+msgid "Enable Extruder"
+msgstr "Extruder inschakelen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:258
-msgctxt "@action:inmenu menubar:help"
-msgid "About..."
-msgstr "Over..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SettingsMenu.qml:57
+msgctxt "@action:inmenu"
+msgid "Disable Extruder"
+msgstr "Extruder uitschakelen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:265
-msgctxt "@action:inmenu menubar:edit"
-msgid "Delete Selected Model"
-msgid_plural "Delete Selected Models"
-msgstr[0] "Geselecteerd model verwijderen"
-msgstr[1] "Geselecteerde modellen verwijderen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/SaveProjectMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Save Project..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:275
-msgctxt "@action:inmenu menubar:edit"
-msgid "Center Selected Model"
-msgid_plural "Center Selected Models"
-msgstr[0] "Geselecteerd model centreren"
-msgstr[1] "Geselecteerde modellen centreren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:27
+msgctxt "@label"
+msgid "Print Selected Model With:"
+msgid_plural "Print Selected Models With:"
+msgstr[0] "Geselecteerd model printen met:"
+msgstr[1] "Geselecteerde modellen printen met:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:284
-msgctxt "@action:inmenu menubar:edit"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:116
+msgctxt "@title:window"
 msgid "Multiply Selected Model"
 msgid_plural "Multiply Selected Models"
 msgstr[0] "Geselecteerd model verveelvoudigen"
 msgstr[1] "Geselecteerde modellen verveelvoudigen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:293
-msgctxt "@action:inmenu"
-msgid "Delete Model"
-msgstr "Model Verwijderen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/ContextMenu.qml:141
+msgctxt "@label"
+msgid "Number of Copies"
+msgstr "Aantal exemplaren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:301
-msgctxt "@action:inmenu"
-msgid "Ce&nter Model on Platform"
-msgstr "Model op Platform Ce&ntreren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Menus/OpenFilesMenu.qml:15
+msgctxt "@title:menu menubar:file"
+msgid "Open File(s)..."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:307
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Group Models"
-msgstr "Modellen &Groeperen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
+msgctxt "@label:header"
+msgid "Custom profiles"
+msgstr "Aangepaste profielen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:327
-msgctxt "@action:inmenu menubar:edit"
-msgid "Ungroup Models"
-msgstr "Groeperen van Modellen Opheffen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:564
+msgctxt "@action:button"
+msgid "Discard current changes"
+msgstr "Huidige wijzigingen verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:337
-msgctxt "@action:inmenu menubar:edit"
-msgid "&Merge Models"
-msgstr "Modellen Samen&voegen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
+msgctxt "@label"
+msgid "Profile"
+msgstr "Profiel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:347
-msgctxt "@action:inmenu"
-msgid "&Multiply Model..."
-msgstr "&Model verveelvoudigen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
+msgctxt "@tooltip"
+msgid ""
+"Some setting/override values are different from the values stored in the profile.\n"
+"\n"
+"Click to open the profile manager."
+msgstr ""
+"Sommige waarden of aanpassingen van instellingen zijn anders dan de waarden die in het profiel zijn opgeslagen.\n"
+"\n"
+"Klik om het profielbeheer te openen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:354
-msgctxt "@action:inmenu menubar:edit"
-msgid "Select All Models"
-msgstr "Alle Modellen Selecteren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
+msgctxt "@label:Should be short"
+msgid "On"
+msgstr "Aan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:364
-msgctxt "@action:inmenu menubar:edit"
-msgid "Clear Build Plate"
-msgstr "Platform Leegmaken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
+msgctxt "@label:Should be short"
+msgid "Off"
+msgstr "Uit"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:374
-msgctxt "@action:inmenu menubar:file"
-msgid "Reload All Models"
-msgstr "Alle Modellen Opnieuw Laden"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
+msgctxt "@label"
+msgid "Experimental"
+msgstr "Experimenteel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:383
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models To All Build Plates"
-msgstr "Alle modellen schikken op alle platformen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
+msgctxt "@button"
+msgid "Recommended"
+msgstr "Aanbevolen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:390
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange All Models"
-msgstr "Alle modellen schikken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
+msgctxt "@button"
+msgid "Custom"
+msgstr "Aangepast"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:398
-msgctxt "@action:inmenu menubar:edit"
-msgid "Arrange Selection"
-msgstr "Selectie schikken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374
+msgctxt "@label"
+msgid "Print settings"
+msgstr "Instellingen voor printen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:405
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Positions"
-msgstr "Alle Modelposities Herstellen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
+msgctxt "@label shown when we load a Gcode file"
+msgid "Print setup disabled. G-code file can not be modified."
+msgstr "De printinstelling is uitgeschakeld. Het G-code-bestand kan niet worden gewijzigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:412
-msgctxt "@action:inmenu menubar:edit"
-msgid "Reset All Model Transformations"
-msgstr "Alle Modeltransformaties Herstellen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+msgctxt "@label"
+msgid "Gradual infill"
+msgstr "Geleidelijke vulling"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:419
-msgctxt "@action:inmenu menubar:file"
-msgid "&Open File(s)..."
-msgstr "Bestand(en) &openen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+msgctxt "@label"
+msgid "Gradual infill will gradually increase the amount of infill towards the top."
+msgstr "Met geleidelijke vulling neemt de hoeveelheid vulling naar boven toe."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:427
-msgctxt "@action:inmenu menubar:file"
-msgid "&New Project..."
-msgstr "&Nieuw project..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:728
+msgctxt "@label"
+msgid "Profiles"
+msgstr "Profielen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:434
-msgctxt "@action:inmenu menubar:help"
-msgid "Show Configuration Folder"
-msgstr "Open Configuratiemap"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
+msgctxt "@tooltip"
+msgid "You have modified some profile settings. If you want to change these go to custom mode."
+msgstr "U hebt enkele profielinstellingen aangepast. Ga naar de aangepaste modus als u deze wilt wijzigen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:441 /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:538
-msgctxt "@action:menu"
-msgid "Configure setting visibility..."
-msgstr "Zichtbaarheid Instelling Configureren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+msgctxt "@label"
+msgid "Support"
+msgstr "Supportstructuur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Actions.qml:448
-msgctxt "@action:menu"
-msgid "&Marketplace"
-msgstr "&Marktplaats"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
+msgctxt "@label"
+msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
+msgstr "Genereer structuren om delen van het model met overhang te ondersteunen. Zonder deze structuren zakken dergelijke delen in tijdens het printen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:266
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
 msgctxt "@label"
-msgid "This package will be installed after restarting."
-msgstr "Dit package wordt na opnieuw starten geïnstalleerd."
+msgid "Adhesion"
+msgstr "Hechting"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:459 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:15
-msgctxt "@title:tab"
-msgid "General"
-msgstr "Algemeen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
+msgctxt "@label"
+msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
+msgstr "Het printen van een brim of raft inschakelen. Deze optie zorgt ervoor dat er extra materiaal rondom of onder het object wordt neergelegd, dat er naderhand eenvoudig kan worden afgesneden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:462
-msgctxt "@title:tab"
-msgid "Settings"
-msgstr "Instellingen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
+msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
+msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
+msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
+msgstr[0] "Er is geen %1 profiel voor de configuratie in extruder %2. In plaats daarvan wordt de standaardintentie gebruikt"
+msgstr[1] "Er is geen %1 profiel voor de configuraties in extruders %2. In plaats daarvan wordt de standaardintentie gebruikt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:464 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:16
-msgctxt "@title:tab"
-msgid "Printers"
-msgstr "Printers"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Widgets/ComboBox.qml:24
+msgctxt "@label"
+msgid "No items to select from"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:468 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:34
-msgctxt "@title:tab"
-msgid "Profiles"
-msgstr "Profielen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:140
+msgctxt "@label"
+msgid "Active print"
+msgstr "Actieve print"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:587
-msgctxt "@title:window %1 is the application name"
-msgid "Closing %1"
-msgstr "%1 wordt gesloten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:148
+msgctxt "@label"
+msgid "Job Name"
+msgstr "Taaknaam"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:588 /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:600
-msgctxt "@label %1 is the application name"
-msgid "Are you sure you want to exit %1?"
-msgstr "Weet u zeker dat u %1 wilt afsluiten?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:156
+msgctxt "@label"
+msgid "Printing Time"
+msgstr "Printtijd"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:638 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrintMonitor.qml:164
+msgctxt "@label"
+msgid "Estimated time left"
+msgstr "Geschatte resterende tijd"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
 msgctxt "@title:window"
-msgid "Open file(s)"
-msgstr "Bestand(en) openen"
+msgid "Discard or Keep changes"
+msgstr "Wijzigingen verwijderen of behouden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:744
-msgctxt "@window:title"
-msgid "Install Package"
-msgstr "Package installeren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
+msgctxt "@text:window, %1 is a profile name"
+msgid ""
+"You have customized some profile settings.\n"
+"Would you like to Keep these changed settings after switching profiles?\n"
+"Alternatively, you can discard the changes to load the defaults from '%1'."
+msgstr ""
+"U hebt enkele profielinstellingen aangepast.\n"
+"Wilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\n"
+"U kunt de wijzigingen ook verwijderen om de standaardinstellingen van '%1' te laden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:752
-msgctxt "@title:window"
-msgid "Open File(s)"
-msgstr "Bestand(en) openen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
+msgctxt "@title:column"
+msgid "Profile settings"
+msgstr "Profielinstellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:755
-msgctxt "@text:window"
-msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
-msgstr "Binnen de door u geselecteerde bestanden zijn een of meer G-code-bestanden aangetroffen. U kunt maximaal één G-code-bestand tegelijk openen. Selecteer maximaal één bestand als u dit wilt openen als G-code-bestand."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
+msgctxt "@title:column"
+msgid "Current changes"
+msgstr "Huidige wijzigingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:858
-msgctxt "@title:window"
-msgid "Add Printer"
-msgstr "Printer Toevoegen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:747
+msgctxt "@option:discardOrKeep"
+msgid "Always ask me this"
+msgstr "Altijd vragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Cura.qml:866
-msgctxt "@title:window"
-msgid "What's New"
-msgstr "Nieuwe functies"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
+msgctxt "@option:discardOrKeep"
+msgid "Discard and never ask again"
+msgstr "Verwijderen en nooit meer vragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
+msgctxt "@option:discardOrKeep"
+msgid "Keep and never ask again"
+msgstr "Behouden en nooit meer vragen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
+msgctxt "@action:button"
+msgid "Discard changes"
+msgstr "Wijzigingen verwijderen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
+msgctxt "@action:button"
+msgid "Keep changes"
+msgstr "Wijzigingen behouden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:15
 msgctxt "@title:window The argument is the application name."
 msgid "About %1"
 msgstr "Ongeveer %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:57
 msgctxt "@label"
 msgid "version: %1"
 msgstr "versie: %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:72
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:72
 msgctxt "@label"
 msgid "End-to-end solution for fused filament 3D printing."
 msgstr "End-to-end-oplossing voor fused filament 3D-printen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:85
 msgctxt "@info:credit"
 msgid ""
 "Cura is developed by Ultimaker B.V. in cooperation with the community.\n"
@@ -3475,1982 +3608,2103 @@ msgstr ""
 "Cura is ontwikkeld door Ultimaker B.V. in samenwerking met de community.\n"
 "Cura maakt met trots gebruik van de volgende opensourceprojecten:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:135
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:135
 msgctxt "@label"
 msgid "Graphical user interface"
 msgstr "Grafische gebruikersinterface (GUI)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:136
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:136
 msgctxt "@label"
 msgid "Application framework"
 msgstr "Toepassingskader"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:137
 msgctxt "@label"
 msgid "G-code generator"
 msgstr "G-code-generator"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:138
 msgctxt "@label"
 msgid "Interprocess communication library"
 msgstr "InterProcess Communication-bibliotheek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:140
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:140
 msgctxt "@label"
 msgid "Programming language"
 msgstr "Programmeertaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:141
 msgctxt "@label"
 msgid "GUI framework"
 msgstr "GUI-kader"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:142
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:142
 msgctxt "@label"
 msgid "GUI framework bindings"
 msgstr "Bindingen met GUI-kader"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:143
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:143
 msgctxt "@label"
 msgid "C/C++ Binding library"
 msgstr "Bindingenbibliotheek C/C++"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:144
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:144
 msgctxt "@label"
 msgid "Data interchange format"
 msgstr "Indeling voor gegevensuitwisseling"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:145
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:145
 msgctxt "@label"
 msgid "Support library for scientific computing"
 msgstr "Ondersteuningsbibliotheek voor wetenschappelijke berekeningen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:146
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:146
 msgctxt "@label"
 msgid "Support library for faster math"
 msgstr "Ondersteuningsbibliotheek voor snellere berekeningen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:147
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:147
 msgctxt "@label"
 msgid "Support library for handling STL files"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van STL-bestanden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:148
 msgctxt "@label"
 msgid "Support library for handling planar objects"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van tweedimensionale objecten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:149
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:149
 msgctxt "@label"
 msgid "Support library for handling triangular meshes"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van driehoekig rasters"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:150
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:150
 msgctxt "@label"
 msgid "Support library for handling 3MF files"
 msgstr "Ondersteuningsbibliotheek voor het verwerken van 3MF-bestanden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:151
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:151
 msgctxt "@label"
 msgid "Support library for file metadata and streaming"
 msgstr "Ondersteuningsbibliotheek voor bestandsmetadata en streaming"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:152
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:152
 msgctxt "@label"
 msgid "Serial communication library"
 msgstr "Seriële-communicatiebibliotheek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:153
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:153
 msgctxt "@label"
 msgid "ZeroConf discovery library"
 msgstr "ZeroConf-detectiebibliotheek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:154
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:154
 msgctxt "@label"
 msgid "Polygon clipping library"
 msgstr "Bibliotheek met veelhoeken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:155
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:155
 msgctxt "@Label"
 msgid "Static type checker for Python"
 msgstr "Statische typecontrole voor Python"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:156 /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:157
 msgctxt "@Label"
 msgid "Root Certificates for validating SSL trustworthiness"
 msgstr "Rootcertificaten voor het valideren van SSL-betrouwbaarheid"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:158
 msgctxt "@Label"
 msgid "Python Error tracking library"
 msgstr "Python fouttraceringsbibliotheek"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:159
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:159
 msgctxt "@label"
 msgid "Polygon packing library, developed by Prusa Research"
 msgstr "Verpakkingsbibliotheek met veelhoeken, ontwikkeld door Prusa Research"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:160
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:160
 msgctxt "@label"
 msgid "Python bindings for libnest2d"
 msgstr "Pythonbindingen voor libnest2d"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:161
+msgctxt "@label"
+msgid "Support library for system keyring access"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:162
+msgctxt "@label"
+msgid "Python extensions for Microsoft Windows"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:163
 msgctxt "@label"
 msgid "Font"
 msgstr "Lettertype"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:163
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:164
 msgctxt "@label"
 msgid "SVG icons"
 msgstr "SVG-pictogrammen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AboutDialog.qml:164
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AboutDialog.qml:165
 msgctxt "@label"
 msgid "Linux cross-distribution application deployment"
 msgstr "Implementatie van Linux-toepassing voor kruisdistributie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:627
 msgctxt "@title:window"
-msgid "Open project file"
-msgstr "Projectbestand openen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:93
-msgctxt "@text:window"
-msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
-msgstr "Dit is een Cura-projectbestand. Wilt u dit openen als project of de modellen eruit importeren?"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:103
-msgctxt "@text:window"
-msgid "Remember my choice"
-msgstr "Mijn keuze onthouden"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:122
-msgctxt "@action:button"
-msgid "Open as project"
-msgstr "Openen als project"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:131
-msgctxt "@action:button"
-msgid "Import models"
-msgstr "Modellen importeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:15
-msgctxt "@title:window"
-msgid "Discard or Keep changes"
-msgstr "Wijzigingen verwijderen of behouden"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:57
-msgctxt "@text:window, %1 is a profile name"
-msgid ""
-"You have customized some profile settings.\n"
-"Would you like to Keep these changed settings after switching profiles?\n"
-"Alternatively, you can discard the changes to load the defaults from '%1'."
-msgstr ""
-"U hebt enkele profielinstellingen aangepast.\n"
-"Wilt u deze gewijzigde instellingen behouden na het verwisselen van profielen?\n"
-"U kunt de wijzigingen ook verwijderen om de standaardinstellingen van '%1' te laden."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:111
-msgctxt "@title:column"
-msgid "Profile settings"
-msgstr "Profielinstellingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:125
-msgctxt "@title:column"
-msgid "Current changes"
-msgstr "Huidige wijzigingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:158 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:747
-msgctxt "@option:discardOrKeep"
-msgid "Always ask me this"
-msgstr "Altijd vragen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:159
-msgctxt "@option:discardOrKeep"
-msgid "Discard and never ask again"
-msgstr "Verwijderen en nooit meer vragen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:160
-msgctxt "@option:discardOrKeep"
-msgid "Keep and never ask again"
-msgstr "Behouden en nooit meer vragen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:197
-msgctxt "@action:button"
-msgid "Discard changes"
-msgstr "Wijzigingen verwijderen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/DiscardOrKeepProfileChangesDialog.qml:210
-msgctxt "@action:button"
-msgid "Keep changes"
-msgstr "Wijzigingen behouden"
+msgid "Open file(s)"
+msgstr "Bestand(en) openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:59
 msgctxt "@text:window"
 msgid "We have found one or more project file(s) within the files you have selected. You can open only one project file at a time. We suggest to only import models from those files. Would you like to proceed?"
 msgstr "Binnen de door u geselecteerde bestanden zijn een of meer projectbestanden aangetroffen. U kunt slechts één projectbestand tegelijk openen. Het wordt aangeraden alleen modellen uit deze bestanden te importeren. Wilt u verdergaan?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/OpenFilesIncludingProjectsDialog.qml:94
 msgctxt "@action:button"
 msgid "Import all as models"
 msgstr "Allemaal als model importeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:15
 msgctxt "@title:window"
 msgid "Save Project"
 msgstr "Project opslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:173
 msgctxt "@action:label"
 msgid "Extruder %1"
 msgstr "Extruder %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:189
 msgctxt "@action:label"
 msgid "%1 & material"
 msgstr "%1 &materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:191
 msgctxt "@action:label"
 msgid "Material"
 msgstr "Materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:281
 msgctxt "@action:label"
 msgid "Don't show project summary on save again"
 msgstr "Bij opnieuw opslaan projectsamenvatting niet weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/WorkspaceSummaryDialog.qml:300
 msgctxt "@action:button"
 msgid "Save"
 msgstr "Opslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ExtruderButton.qml:16
-msgctxt "@label %1 is filled in with the name of an extruder"
-msgid "Print Selected Model with %1"
-msgid_plural "Print Selected Models with %1"
-msgstr[0] "Geselecteerd model printen met %1"
-msgstr[1] "Geselecteerde modellen printen met %1"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:20
+msgctxt "@title:window"
+msgid "Open project file"
+msgstr "Projectbestand openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/JobSpecs.qml:99
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:88
+msgctxt "@text:window"
+msgid "This is a Cura project file. Would you like to open it as a project or import the models from it?"
+msgstr "Dit is een Cura-projectbestand. Wilt u dit openen als project of de modellen eruit importeren?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:98
+msgctxt "@text:window"
+msgid "Remember my choice"
+msgstr "Mijn keuze onthouden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:117
+msgctxt "@action:button"
+msgid "Open as project"
+msgstr "Openen als project"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Dialogs/AskOpenAsProjectOrModelsDialog.qml:126
+msgctxt "@action:button"
+msgid "Import models"
+msgstr "Modellen importeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/JobSpecs.qml:99
 msgctxt "@text Print job name"
 msgid "Untitled"
 msgstr "Zonder titel"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:27 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&File"
-msgstr "&Bestand"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:56
+msgctxt "@label"
+msgid "Welcome to Ultimaker Cura"
+msgstr "Welkom bij Ultimaker Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Edit"
-msgstr "B&ewerken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:68
+msgctxt "@text"
+msgid "Please follow these steps to set up Ultimaker Cura. This will only take a few moments."
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:49 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:12
-msgctxt "@title:menu menubar:toplevel"
-msgid "&View"
-msgstr "Beel&d"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WelcomeContent.qml:86
+msgctxt "@button"
+msgid "Get started"
+msgstr "Aan de slag"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:51 /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:13
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Settings"
-msgstr "In&stellingen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
+msgctxt "@label"
+msgid "Empty"
+msgstr "Leeg"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
-msgctxt "@title:menu menubar:toplevel"
-msgid "E&xtensions"
-msgstr "E&xtensies"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+msgctxt "@label"
+msgid "Help us to improve Ultimaker Cura"
+msgstr "Help ons Ultimaker Cura te verbeteren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
-msgctxt "@title:menu menubar:toplevel"
-msgid "P&references"
-msgstr "Voo&rkeuren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
+msgctxt "@text"
+msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
+msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren, waaronder:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
-msgctxt "@title:menu menubar:toplevel"
-msgid "&Help"
-msgstr "&Help"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
+msgctxt "@text"
+msgid "Machine types"
+msgstr "Machinetypen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
-msgctxt "@title:window"
-msgid "New project"
-msgstr "Nieuw project"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
+msgctxt "@text"
+msgid "Material usage"
+msgstr "Materiaalgebruik"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
-msgctxt "@info:question"
-msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
-msgstr "Weet u zeker dat u een nieuw project wilt starten? Hiermee wordt het platform leeggemaakt en worden eventuele niet-opgeslagen instellingen verwijderd."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
+msgctxt "@text"
+msgid "Number of slices"
+msgstr "Aantal slices"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
-msgctxt "@action:button"
-msgid "Marketplace"
-msgstr "Marktplaats"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
+msgctxt "@text"
+msgid "Print settings"
+msgstr "Instellingen voor printen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/AutoConfiguration.qml:18
-msgctxt "@header"
-msgid "Configurations"
-msgstr "Configuraties"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
+msgctxt "@text"
+msgid "Data collected by Ultimaker Cura will not contain any personal information."
+msgstr "De gegevens die Ultimaker Cura verzamelt, bevatten geen persoonlijke informatie."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
+msgctxt "@text"
+msgid "More information"
+msgstr "Meer informatie"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
 msgctxt "@label"
-msgid "This configuration is not available because %1 is not recognized. Please visit %2 to download the correct material profile."
-msgstr "Deze configuratie is niet beschikbaar omdat %1 niet wordt herkend. Ga naar %2 om het juiste materiaalprofiel te downloaden."
+msgid "Add printer by IP address"
+msgstr "Een printer toevoegen op IP-adres"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
+msgctxt "@text"
+msgid "Enter your printer's IP address."
+msgstr "Voer het IP-adres van uw printer in."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
+msgctxt "@button"
+msgid "Add"
+msgstr "Toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationItem.qml:138
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
 msgctxt "@label"
-msgid "Marketplace"
-msgstr "Marktplaats"
+msgid "Could not connect to device."
+msgstr "Kan geen verbinding maken met het apparaat."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:57
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
 msgctxt "@label"
-msgid "Loading available configurations from the printer..."
-msgstr "Beschikbare configuraties laden vanaf de printer..."
+msgid "Can't connect to your Ultimaker printer?"
+msgstr "Kunt u geen verbinding maken met uw Ultimaker-printer?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationListView.qml:58
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
 msgctxt "@label"
-msgid "The configurations are not available because the printer is disconnected."
-msgstr "De configuraties zijn niet beschikbaar omdat de printer niet verbonden is."
+msgid "The printer at this address has not responded yet."
+msgstr "De printer op dit adres heeft nog niet gereageerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:112
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
 msgctxt "@label"
-msgid "Select configuration"
-msgstr "Configuratie selecteren"
+msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
+msgstr "Kan de printer niet toevoegen omdat het een onbekende printer is of omdat het niet de host in een groep is."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+msgctxt "@button"
+msgid "Back"
+msgstr "Terug"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/ConfigurationMenu.qml:223
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+msgctxt "@button"
+msgid "Connect"
+msgstr "Verbinding maken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
 msgctxt "@label"
-msgid "Configurations"
-msgstr "Configuraties"
+msgid "Add a printer"
+msgstr "Een printer toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:25
-msgctxt "@header"
-msgid "Custom"
-msgstr "Aangepast"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
+msgctxt "@label"
+msgid "Add a networked printer"
+msgstr "Een netwerkprinter toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:61
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
 msgctxt "@label"
-msgid "Printer"
-msgstr "Printer"
+msgid "Add a non-networked printer"
+msgstr "Een niet-netwerkprinter toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:213
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:28
 msgctxt "@label"
-msgid "Enabled"
-msgstr "Ingeschakeld"
+msgid "What's New"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:267
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
 msgctxt "@label"
-msgid "Material"
-msgstr "Materiaal"
+msgid "Add a Cloud printer"
+msgstr "Een cloudprinter toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ConfigurationMenu/CustomConfiguration.qml:394
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
 msgctxt "@label"
-msgid "Use glue for better adhesion with this material combination."
-msgstr "Gebruik lijm bij deze combinatie van materialen voor een betere hechting."
+msgid "Waiting for Cloud response"
+msgstr "Wachten op cloudreactie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:27
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
 msgctxt "@label"
-msgid "Print Selected Model With:"
-msgid_plural "Print Selected Models With:"
-msgstr[0] "Geselecteerd model printen met:"
-msgstr[1] "Geselecteerde modellen printen met:"
+msgid "No printers found in your account?"
+msgstr "Geen printers gevonden in uw account?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:116
-msgctxt "@title:window"
-msgid "Multiply Selected Model"
-msgid_plural "Multiply Selected Models"
-msgstr[0] "Geselecteerd model verveelvoudigen"
-msgstr[1] "Geselecteerde modellen verveelvoudigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
+msgctxt "@label"
+msgid "The following printers in your account have been added in Cura:"
+msgstr "De volgende printers in uw account zijn toegevoegd in Cura:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ContextMenu.qml:141
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+msgctxt "@button"
+msgid "Add printer manually"
+msgstr "Printer handmatig toevoegen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:64
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:20
 msgctxt "@label"
-msgid "Number of Copies"
-msgstr "Aantal exemplaren"
+msgid "Sign in to the Ultimaker platform"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:33
-msgctxt "@title:menu menubar:file"
-msgid "&Save Project..."
-msgstr "&Project opslaan..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:124
+msgctxt "@text"
+msgid "Add material settings and plugins from the Marketplace"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:54
-msgctxt "@title:menu menubar:file"
-msgid "&Export..."
-msgstr "&Exporteren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:154
+msgctxt "@text"
+msgid "Backup and sync your material settings and plugins"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/FileMenu.qml:65
-msgctxt "@action:inmenu menubar:file"
-msgid "Export Selection..."
-msgstr "Selectie Exporteren..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:184
+msgctxt "@text"
+msgid "Share ideas and get help from 48,000+ users in the Ultimaker Community"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:13
-msgctxt "@label:category menu label"
-msgid "Material"
-msgstr "Materiaal"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:217
+msgctxt "@text"
+msgid "Create a free Ultimaker Account"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:54
-msgctxt "@label:category menu label"
-msgid "Favorites"
-msgstr "Favorieten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/CloudContent.qml:230
+msgctxt "@button"
+msgid "Skip"
+msgstr "Overslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/MaterialMenu.qml:79
-msgctxt "@label:category menu label"
-msgid "Generic"
-msgstr "Standaard"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
+msgctxt "@label"
+msgid "User Agreement"
+msgstr "Gebruikersovereenkomst"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:25
-msgctxt "@label:category menu label"
-msgid "Network enabled printers"
-msgstr "Netwerkprinters"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
+msgctxt "@button"
+msgid "Decline and close"
+msgstr "Afwijzen en sluiten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/PrinterMenu.qml:42
-msgctxt "@label:category menu label"
-msgid "Local printers"
-msgstr "Lokale printers"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/ChangelogContent.qml:24
+msgctxt "@label"
+msgid "Release Notes"
+msgstr ""
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/RecentFilesMenu.qml:15
-msgctxt "@title:menu menubar:file"
-msgid "Open &Recent"
-msgstr "&Recente bestanden openen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
+msgctxt "@label"
+msgid "There is no printer found over your network."
+msgstr "Kan in uw netwerk geen printer vinden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:15
-msgctxt "@title:menu menubar:settings"
-msgid "&Printer"
-msgstr "&Printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+msgctxt "@label"
+msgid "Refresh"
+msgstr "Vernieuwen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:29
-msgctxt "@title:menu"
-msgid "&Material"
-msgstr "&Materiaal"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+msgctxt "@label"
+msgid "Add printer by IP"
+msgstr "Printer toevoegen op IP"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:44
-msgctxt "@action:inmenu"
-msgid "Set as Active Extruder"
-msgstr "Instellen als Actieve Extruder"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
+msgctxt "@label"
+msgid "Add cloud printer"
+msgstr "Een cloudprinter toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:50
-msgctxt "@action:inmenu"
-msgid "Enable Extruder"
-msgstr "Extruder inschakelen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+msgctxt "@label"
+msgid "Troubleshooting"
+msgstr "Probleemoplossing"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingsMenu.qml:57
-msgctxt "@action:inmenu"
-msgid "Disable Extruder"
-msgstr "Extruder uitschakelen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
+msgctxt "@label"
+msgid "Manufacturer"
+msgstr "Fabrikant"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
+msgctxt "@label"
+msgid "Profile author"
+msgstr "Profieleigenaar"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
+msgctxt "@label"
+msgid "Printer name"
+msgstr "Printernaam"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
+msgctxt "@text"
+msgid "Please name your printer"
+msgstr "Geef uw printer een naam"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:81
+msgctxt "@label The argument is a timestamp"
+msgid "Last update: %1"
+msgstr "Laatste update: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:109
+msgctxt "@button"
+msgid "Ultimaker Account"
+msgstr "Ultimaker-account"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/UserOperations.qml:125
+msgctxt "@button"
+msgid "Sign Out"
+msgstr "Afmelden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:42
+msgctxt "@text"
+msgid ""
+"- Add material profiles and plug-ins from the Marketplace\n"
+"- Back-up and sync your material profiles and plug-ins\n"
+"- Share ideas and get help from 48,000+ users in the Ultimaker community"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/GeneralOperations.qml:62
+msgctxt "@button"
+msgid "Create a free Ultimaker account"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/AccountWidget.qml:24
+msgctxt "@action:button"
+msgid "Sign in"
+msgstr "Aanmelden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:13
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:28
+msgctxt "@label"
+msgid "Checking..."
+msgstr "Aan het controleren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:35
+msgctxt "@label"
+msgid "Account synced"
+msgstr "Account gesynchroniseerd"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:42
+msgctxt "@label"
+msgid "Something went wrong..."
+msgstr "Er is een fout opgetreden..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:96
+msgctxt "@button"
+msgid "Install pending updates"
+msgstr "Updates in afwachting installeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Account/SyncState.qml:118
+msgctxt "@button"
+msgid "Check for account updates"
+msgstr "Controleren op accountupdates"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectSelector.qml:59
+msgctxt "@label"
+msgid "Object list"
+msgstr "Lijst met objecten"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:82
 msgctxt "@action:inmenu"
-msgid "Visible Settings"
-msgstr "Zichtbare instellingen"
+msgid "Show Online Troubleshooting Guide"
+msgstr "Online gids voor probleemoplossing weergegeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:42
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:89
 msgctxt "@action:inmenu"
-msgid "Collapse All Categories"
-msgstr "Alle categorieën samenvouwen"
+msgid "Toggle Full Screen"
+msgstr "Volledig Scherm In-/Uitschakelen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/SettingVisibilityPresetsMenu.qml:51
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:97
 msgctxt "@action:inmenu"
-msgid "Manage Setting Visibility..."
-msgstr "Instelling voor zichtbaarheid beheren..."
+msgid "Exit Full Screen"
+msgstr "Volledig scherm sluiten"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:104
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Undo"
+msgstr "Ongedaan &Maken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:114
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Redo"
+msgstr "&Opnieuw"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:124
+msgctxt "@action:inmenu menubar:file"
+msgid "&Quit"
+msgstr "&Afsluiten"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:132
 msgctxt "@action:inmenu menubar:view"
-msgid "&Camera position"
-msgstr "&Camerapositie"
+msgid "3D View"
+msgstr "3D-weergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:44
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:139
 msgctxt "@action:inmenu menubar:view"
-msgid "Camera view"
-msgstr "Camerabeeld"
+msgid "Front View"
+msgstr "Weergave voorzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:47
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:146
 msgctxt "@action:inmenu menubar:view"
-msgid "Perspective"
-msgstr "Perspectief"
+msgid "Top View"
+msgstr "Weergave bovenzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:153
 msgctxt "@action:inmenu menubar:view"
-msgid "Orthographic"
-msgstr "Orthografisch"
+msgid "Left Side View"
+msgstr "Weergave linkerzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Menus/ViewMenu.qml:80
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:160
 msgctxt "@action:inmenu menubar:view"
-msgid "&Build plate"
-msgstr "&Platform"
+msgid "Right Side View"
+msgstr "Weergave rechterzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:119
-msgctxt "@label:MonitorStatus"
-msgid "Not connected to a printer"
-msgstr "Niet met een printer verbonden"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:167
+msgctxt "@action:inmenu"
+msgid "Configure Cura..."
+msgstr "Cura Configureren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:123
-msgctxt "@label:MonitorStatus"
-msgid "Printer does not accept commands"
-msgstr "Printer accepteert geen opdrachten"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:174
+msgctxt "@action:inmenu menubar:printer"
+msgid "&Add Printer..."
+msgstr "&Printer Toevoegen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:133
-msgctxt "@label:MonitorStatus"
-msgid "In maintenance. Please check the printer"
-msgstr "In onderhoud. Controleer de printer"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:180
+msgctxt "@action:inmenu menubar:printer"
+msgid "Manage Pr&inters..."
+msgstr "Pr&inters Beheren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:144
-msgctxt "@label:MonitorStatus"
-msgid "Lost connection with the printer"
-msgstr "Verbinding met de printer is verbroken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:187
+msgctxt "@action:inmenu"
+msgid "Manage Materials..."
+msgstr "Materialen Beheren..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:146
-msgctxt "@label:MonitorStatus"
-msgid "Printing..."
-msgstr "Printen..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:195
+msgctxt "@action:inmenu"
+msgid "Add more materials from Marketplace"
+msgstr "Meer materialen toevoegen van Marketplace"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:149
-msgctxt "@label:MonitorStatus"
-msgid "Paused"
-msgstr "Gepauzeerd"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:202
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Update profile with current settings/overrides"
+msgstr "Profiel bijwerken met h&uidige instellingen/overschrijvingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:152
-msgctxt "@label:MonitorStatus"
-msgid "Preparing..."
-msgstr "Voorbereiden..."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:210
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Discard current changes"
+msgstr "Hui&dige wijzigingen verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:154
-msgctxt "@label:MonitorStatus"
-msgid "Please remove the print"
-msgstr "Verwijder de print"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:222
+msgctxt "@action:inmenu menubar:profile"
+msgid "&Create profile from current settings/overrides..."
+msgstr "Profiel maken op basis van huidige instellingen/overs&chrijvingen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:228
+msgctxt "@action:inmenu menubar:profile"
+msgid "Manage Profiles..."
+msgstr "Profielen Beheren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:236
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Online &Documentation"
+msgstr "Online &Documentatie Weergeven"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:244
+msgctxt "@action:inmenu menubar:help"
+msgid "Report a &Bug"
+msgstr "Een &Bug Rapporteren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:252
+msgctxt "@action:inmenu menubar:help"
+msgid "What's New"
+msgstr "Nieuwe functies"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:258
+msgctxt "@action:inmenu menubar:help"
+msgid "About..."
+msgstr "Over..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:265
+msgctxt "@action:inmenu menubar:edit"
+msgid "Delete Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:275
+msgctxt "@action:inmenu menubar:edit"
+msgid "Center Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:284
+msgctxt "@action:inmenu menubar:edit"
+msgid "Multiply Selected"
+msgstr ""
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:293
+msgctxt "@action:inmenu"
+msgid "Delete Model"
+msgstr "Model Verwijderen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:301
+msgctxt "@action:inmenu"
+msgid "Ce&nter Model on Platform"
+msgstr "Model op Platform Ce&ntreren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:307
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Group Models"
+msgstr "Modellen &Groeperen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:327
+msgctxt "@action:inmenu menubar:edit"
+msgid "Ungroup Models"
+msgstr "Groeperen van Modellen Opheffen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:337
+msgctxt "@action:inmenu menubar:edit"
+msgid "&Merge Models"
+msgstr "Modellen Samen&voegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:325
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:347
+msgctxt "@action:inmenu"
+msgid "&Multiply Model..."
+msgstr "&Model verveelvoudigen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:354
+msgctxt "@action:inmenu menubar:edit"
+msgid "Select All Models"
+msgstr "Alle Modellen Selecteren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:364
+msgctxt "@action:inmenu menubar:edit"
+msgid "Clear Build Plate"
+msgstr "Platform Leegmaken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:374
+msgctxt "@action:inmenu menubar:file"
+msgid "Reload All Models"
+msgstr "Alle Modellen Opnieuw Laden"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:383
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models To All Build Plates"
+msgstr "Alle modellen schikken op alle platformen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:390
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange All Models"
+msgstr "Alle modellen schikken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:398
+msgctxt "@action:inmenu menubar:edit"
+msgid "Arrange Selection"
+msgstr "Selectie schikken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:405
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Positions"
+msgstr "Alle Modelposities Herstellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:412
+msgctxt "@action:inmenu menubar:edit"
+msgid "Reset All Model Transformations"
+msgstr "Alle Modeltransformaties Herstellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:421
+msgctxt "@action:inmenu menubar:file"
+msgid "&Open File(s)..."
+msgstr "Bestand(en) &openen..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:431
+msgctxt "@action:inmenu menubar:file"
+msgid "&New Project..."
+msgstr "&Nieuw project..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:438
+msgctxt "@action:inmenu menubar:help"
+msgid "Show Configuration Folder"
+msgstr "Open Configuratiemap"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:445
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:538
+msgctxt "@action:menu"
+msgid "Configure setting visibility..."
+msgstr "Zichtbaarheid Instelling Configureren..."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Actions.qml:452
+msgctxt "@action:menu"
+msgid "&Marketplace"
+msgstr "&Marktplaats"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:61
+msgctxt "@info:status"
+msgid "Calculated"
+msgstr "Berekend"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:75
+msgctxt "@title:column"
+msgid "Setting"
+msgstr "Instelling"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:82
+msgctxt "@title:column"
+msgid "Profile"
+msgstr "Profiel"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:89
+msgctxt "@title:column"
+msgid "Current"
+msgstr "Huidig"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfileTab.qml:97
+msgctxt "@title:column"
+msgid "Unit"
+msgstr "Eenheid"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
+msgctxt "@title"
+msgid "Information"
+msgstr "Informatie"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
+msgctxt "@title:window"
+msgid "Confirm Diameter Change"
+msgstr "Diameterwijziging bevestigen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
+msgctxt "@label (%1 is a number)"
+msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
+msgstr "Het nieuwe filament is ingesteld op %1 mm. Dit is niet compatibel met de huidige extruder. Wilt u verder gaan?"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
 msgctxt "@label"
-msgid "Abort Print"
-msgstr "Printen Afbreken"
+msgid "Display Name"
+msgstr "Naam"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/MonitorButton.qml:337
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
 msgctxt "@label"
-msgid "Are you sure you want to abort the print?"
-msgstr "Weet u zeker dat u het printen wilt afbreken?"
+msgid "Material Type"
+msgstr "Type Materiaal"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:114
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
 msgctxt "@label"
-msgid "Is printed as support."
-msgstr "Is geprint als support."
+msgid "Color"
+msgstr "Kleur"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:117
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
 msgctxt "@label"
-msgid "Other models overlapping with this model are modified."
-msgstr "Andere modellen die met dit model overlappen, zijn gewijzigd."
+msgid "Properties"
+msgstr "Eigenschappen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:120
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
 msgctxt "@label"
-msgid "Infill overlapping with this model is modified."
-msgstr "De vulling die met dit model overlapt, is aangepast."
+msgid "Density"
+msgstr "Dichtheid"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:123
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
 msgctxt "@label"
-msgid "Overlaps with this model are not supported."
-msgstr "Overlappingen worden in dit model niet ondersteund."
+msgid "Diameter"
+msgstr "Diameter"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectItemButton.qml:130
-msgctxt "@label %1 is the number of settings it overrides."
-msgid "Overrides %1 setting."
-msgid_plural "Overrides %1 settings."
-msgstr[0] "Overschrijft %1 instelling."
-msgstr[1] "Overschrijft %1 instellingen."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
+msgctxt "@label"
+msgid "Filament Cost"
+msgstr "Kostprijs Filament"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ObjectSelector.qml:59
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
 msgctxt "@label"
-msgid "Object list"
-msgstr "Lijst met objecten"
+msgid "Filament weight"
+msgstr "Gewicht filament"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:137
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
+msgctxt "@label"
+msgid "Filament length"
+msgstr "Lengte filament"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+msgctxt "@label"
+msgid "Cost per Meter"
+msgstr "Kostprijs per meter"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+msgctxt "@label"
+msgid "This material is linked to %1 and shares some of its properties."
+msgstr "Dit materiaal is gekoppeld aan %1 en deelt hiermee enkele eigenschappen."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
+msgctxt "@label"
+msgid "Unlink Material"
+msgstr "Materiaal ontkoppelen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
+msgctxt "@label"
+msgid "Description"
+msgstr "Beschrijving"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+msgctxt "@label"
+msgid "Adhesion Information"
+msgstr "Gegevens Hechting"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:40
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:84
+msgctxt "@action:button"
+msgid "Activate"
+msgstr "Activeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
+msgctxt "@action:button"
+msgid "Create"
+msgstr "Maken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
+msgctxt "@action:button"
+msgid "Duplicate"
+msgstr "Dupliceren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:167
+msgctxt "@action:button"
+msgid "Import"
+msgstr "Importeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:179
+msgctxt "@action:button"
+msgid "Export"
+msgstr "Exporteren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
+msgctxt "@action:label"
+msgid "Printer"
+msgstr "Printer"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:277
+msgctxt "@title:window"
+msgid "Confirm Remove"
+msgstr "Verwijderen Bevestigen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:278
+msgctxt "@label (%1 is object name)"
+msgid "Are you sure you wish to remove %1? This cannot be undone!"
+msgstr "Weet u zeker dat u %1 wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
+msgctxt "@title:window"
+msgid "Import Material"
+msgstr "Materiaal Importeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
+msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
+msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
+msgstr "Kon materiaal <filename>%1</filename> niet importeren: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully imported material <filename>%1</filename>"
+msgstr "Materiaal <filename>%1</filename> is geïmporteerd"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
+msgctxt "@title:window"
+msgid "Export Material"
+msgstr "Materiaal Exporteren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
+msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
+msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
+msgstr "Exporteren van materiaal naar <filename>%1</filename> is mislukt: <message>%2</message>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
+msgctxt "@info:status Don't translate the XML tag <filename>!"
+msgid "Successfully exported material to <filename>%1</filename>"
+msgstr "Materiaal is geëxporteerd naar <filename>%1</filename>"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:16
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:455
+msgctxt "@title:tab"
+msgid "Printers"
+msgstr "Printers"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/MachinesPage.qml:63
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:152
+msgctxt "@action:button"
+msgid "Rename"
+msgstr "Hernoemen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:34
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:459
+msgctxt "@title:tab"
+msgid "Profiles"
+msgstr "Profielen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+msgctxt "@label"
+msgid "Create"
+msgstr "Maken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+msgctxt "@label"
+msgid "Duplicate"
+msgstr "Dupliceren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:202
+msgctxt "@title:window"
+msgid "Create Profile"
+msgstr "Profiel Maken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:204
+msgctxt "@info"
+msgid "Please provide a name for this profile."
+msgstr "Geef een naam op voor dit profiel."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:263
+msgctxt "@title:window"
+msgid "Duplicate Profile"
+msgstr "Profiel Dupliceren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:294
+msgctxt "@title:window"
+msgid "Rename Profile"
+msgstr "Profiel Hernoemen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:307
+msgctxt "@title:window"
+msgid "Import Profile"
+msgstr "Profiel Importeren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:336
+msgctxt "@title:window"
+msgid "Export Profile"
+msgstr "Profiel Exporteren"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:399
+msgctxt "@label %1 is printer name"
+msgid "Printer: %1"
+msgstr "Printer: %1"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:557
+msgctxt "@action:button"
+msgid "Update profile with current settings/overrides"
+msgstr "Profiel bijwerken met huidige instellingen/overschrijvingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:583
+msgctxt "@action:label"
+msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
+msgstr "Dit profiel gebruikt de standaardinstellingen die door de printer zijn opgegeven, dus er zijn hiervoor geen instellingen/overschrijvingen in de onderstaande lijst."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:591
+msgctxt "@action:label"
+msgid "Your current settings match the selected profile."
+msgstr "Uw huidige instellingen komen overeen met het geselecteerde profiel."
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/ProfilesPage.qml:609
+msgctxt "@title:tab"
+msgid "Global Settings"
+msgstr "Algemene Instellingen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
+msgctxt "@title:tab"
+msgid "Setting Visibility"
+msgstr "Zichtbaarheid Instellen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
+msgctxt "@label:textbox"
+msgid "Check all"
+msgstr "Alles aanvinken"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:15
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:450
+msgctxt "@title:tab"
+msgid "General"
+msgstr "Algemeen"
+
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:137
 msgctxt "@label"
 msgid "Interface"
 msgstr "Interface"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:216
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:216
 msgctxt "@label"
 msgid "Currency:"
 msgstr "Valuta:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:229
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:229
 msgctxt "@label"
 msgid "Theme:"
 msgstr "Thema:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:285
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:285
 msgctxt "@label"
 msgid "You will need to restart the application for these changes to have effect."
 msgstr "U moet de toepassing opnieuw starten voordat deze wijzigingen van kracht worden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:302
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:302
 msgctxt "@info:tooltip"
 msgid "Slice automatically when changing settings."
 msgstr "Automatisch slicen bij wijzigen van instellingen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:310
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:310
 msgctxt "@option:check"
 msgid "Slice automatically"
 msgstr "Automatisch slicen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:324
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:324
 msgctxt "@label"
 msgid "Viewport behavior"
 msgstr "Gedrag kijkvenster"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:332
 msgctxt "@info:tooltip"
 msgid "Highlight unsupported areas of the model in red. Without support these areas will not print properly."
 msgstr "Geef niet-ondersteunde gedeelten van het model een rode markering. Zonder ondersteuning zullen deze gedeelten niet goed worden geprint."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:341
 msgctxt "@option:check"
 msgid "Display overhang"
 msgstr "Overhang weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:351
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:351
 msgctxt "@info:tooltip"
 msgid "Highlight missing or extraneous surfaces of the model using warning signs. The toolpaths will often be missing parts of the intended geometry."
 msgstr "Markeer ontbrekende of ongebruikelijke oppervlakken van het model met behulp van waarschuwingstekens. De toolpaths zullen vaak delen van de beoogde geometrie missen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:360
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:360
 msgctxt "@option:check"
 msgid "Display model errors"
 msgstr "Modelfouten weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:368
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:368
 msgctxt "@info:tooltip"
 msgid "Moves the camera so the model is in the center of the view when a model is selected"
 msgstr "Verplaatst de camera zodanig dat wanneer een model wordt geselecteerd, het model in het midden van het beeld wordt weergegeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:373
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:373
 msgctxt "@action:button"
 msgid "Center camera when item is selected"
 msgstr "Camera centreren wanneer een item wordt geselecteerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:383
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:383
 msgctxt "@info:tooltip"
 msgid "Should the default zoom behavior of cura be inverted?"
 msgstr "Moet het standaard zoomgedrag van Cura worden omgekeerd?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:388
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:388
 msgctxt "@action:button"
 msgid "Invert the direction of camera zoom."
 msgstr "Keer de richting van de camerazoom om."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Should zooming move in the direction of the mouse?"
 msgstr "Moet het zoomen in de richting van de muis gebeuren?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:404
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:404
 msgctxt "@info:tooltip"
 msgid "Zooming towards the mouse is not supported in the orthographic perspective."
 msgstr "Zoomen in de richting van de muis wordt niet ondersteund in het orthografische perspectief."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:409
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:409
 msgctxt "@action:button"
 msgid "Zoom toward mouse direction"
 msgstr "Zoomen in de richting van de muis"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:435
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:435
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved so that they no longer intersect?"
 msgstr "Moeten modellen op het platform zodanig worden verplaatst dat ze elkaar niet meer doorsnijden?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:440
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:440
 msgctxt "@option:check"
 msgid "Ensure models are kept apart"
 msgstr "Modellen gescheiden houden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:449
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:449
 msgctxt "@info:tooltip"
 msgid "Should models on the platform be moved down to touch the build plate?"
 msgstr "Moeten modellen in het printgebied omlaag worden gebracht zodat ze het platform raken?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:454
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:454
 msgctxt "@option:check"
 msgid "Automatically drop models to the build plate"
 msgstr "Modellen automatisch op het platform laten vallen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:466
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:466
 msgctxt "@info:tooltip"
 msgid "Show caution message in g-code reader."
 msgstr "Toon het waarschuwingsbericht in de G-code-lezer."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:475
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:475
 msgctxt "@option:check"
 msgid "Caution message in g-code reader"
 msgstr "Waarschuwingsbericht in de G-code-lezer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:483
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:483
 msgctxt "@info:tooltip"
 msgid "Should layer be forced into compatibility mode?"
 msgstr "Moet de laag in de compatibiliteitsmodus worden geforceerd?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:488
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:488
 msgctxt "@option:check"
 msgid "Force layer view compatibility mode (restart required)"
 msgstr "Compatibiliteitsmodus voor laagweergave forceren (opnieuw opstarten vereist)"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:498
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:498
 msgctxt "@info:tooltip"
 msgid "Should Cura open at the location it was closed?"
 msgstr "Moet Cura openen op de locatie waar het gesloten werd?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:503
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:503
 msgctxt "@option:check"
 msgid "Restore window position on start"
 msgstr "Herstel de vensterpositie bij het opstarten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:513
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:513
 msgctxt "@info:tooltip"
 msgid "What type of camera rendering should be used?"
 msgstr "Welk type cameraweergave moet worden gebruikt?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:520
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:520
 msgctxt "@window:text"
 msgid "Camera rendering:"
 msgstr "Cameraweergave:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:531
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:531
 msgid "Perspective"
 msgstr "Perspectief"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:532
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:532
 msgid "Orthographic"
 msgstr "Orthografisch"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:563
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:563
 msgctxt "@label"
 msgid "Opening and saving files"
 msgstr "Bestanden openen en opslaan"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:570
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:570
 msgctxt "@info:tooltip"
 msgid "Should opening files from the desktop or external applications open in the same instance of Cura?"
 msgstr "Wilt u dat bestanden vanaf de desktop of externe toepassingen in dezelfde instantie van Cura worden geopend?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:575
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:575
 msgctxt "@option:check"
 msgid "Use a single instance of Cura"
 msgstr "Gebruik één instantie van Cura"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:585
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:585
 msgctxt "@info:tooltip"
 msgid "Should models be scaled to the build volume if they are too large?"
 msgstr "Moeten modellen worden geschaald naar het werkvolume als ze te groot zijn?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:590
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:590
 msgctxt "@option:check"
 msgid "Scale large models"
 msgstr "Grote modellen schalen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:600
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:600
 msgctxt "@info:tooltip"
 msgid "An model may appear extremely small if its unit is for example in meters rather than millimeters. Should these models be scaled up?"
 msgstr "Een model wordt mogelijk extreem klein weergegeven als de eenheden bijvoorbeeld in meters zijn in plaats van in millimeters. Moeten dergelijke modellen worden opgeschaald?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:605
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:605
 msgctxt "@option:check"
 msgid "Scale extremely small models"
 msgstr "Extreem kleine modellen schalen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:615
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:615
 msgctxt "@info:tooltip"
 msgid "Should models be selected after they are loaded?"
 msgstr "Moeten modellen worden geselecteerd nadat ze zijn geladen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:620
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:620
 msgctxt "@option:check"
 msgid "Select models when loaded"
 msgstr "Modellen selecteren wanneer ze geladen zijn"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:630
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:630
 msgctxt "@info:tooltip"
 msgid "Should a prefix based on the printer name be added to the print job name automatically?"
 msgstr "Moet er automatisch een op de printernaam gebaseerde voorvoegsel aan de naam van de printtaak worden toegevoegd?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:635
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:635
 msgctxt "@option:check"
 msgid "Add machine prefix to job name"
 msgstr "Machinevoorvoegsel toevoegen aan taaknaam"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:645
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:645
 msgctxt "@info:tooltip"
 msgid "Should a summary be shown when saving a project file?"
 msgstr "Dient er een samenvatting te worden weergegeven wanneer een projectbestand wordt opgeslagen?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:649
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:649
 msgctxt "@option:check"
 msgid "Show summary dialog when saving project"
 msgstr "Dialoogvenster voor samenvatting weergeven tijdens het opslaan van een project"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:659
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:659
 msgctxt "@info:tooltip"
 msgid "Default behavior when opening a project file"
 msgstr "Standaardgedrag tijdens het openen van een projectbestand"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:667
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:667
 msgctxt "@window:text"
 msgid "Default behavior when opening a project file: "
 msgstr "Standaardgedrag tijdens het openen van een projectbestand: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:681
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:681
 msgctxt "@option:openProject"
 msgid "Always ask me this"
 msgstr "Altijd vragen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:682
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:682
 msgctxt "@option:openProject"
 msgid "Always open as a project"
 msgstr "Altijd als project openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:683
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:683
 msgctxt "@option:openProject"
 msgid "Always import models"
 msgstr "Altijd modellen importeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:719
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:719
 msgctxt "@info:tooltip"
 msgid "When you have made changes to a profile and switched to a different one, a dialog will be shown asking whether you want to keep your modifications or not, or you can choose a default behaviour and never show that dialog again."
 msgstr "Wanneer u wijzigingen hebt aangebracht aan een profiel en naar een ander profiel wisselt, wordt een dialoogvenster weergegeven waarin u wordt gevraagd of u de aanpassingen wilt behouden. U kunt ook een standaardgedrag kiezen en het dialoogvenster nooit meer laten weergeven."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:728 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:52
-msgctxt "@label"
-msgid "Profiles"
-msgstr "Profielen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:733
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:733
 msgctxt "@window:text"
 msgid "Default behavior for changed setting values when switching to a different profile: "
 msgstr "Standaardgedrag voor gewijzigde instellingen wanneer er naar een ander profiel wordt overgeschakeld: "
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:748
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:748
 msgctxt "@option:discardOrKeep"
 msgid "Always discard changed settings"
 msgstr "Gewijzigde instellingen altijd verwijderen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:749
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:749
 msgctxt "@option:discardOrKeep"
 msgid "Always transfer changed settings to new profile"
 msgstr "Gewijzigde instellingen altijd naar nieuw profiel overbrengen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:783
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:783
 msgctxt "@label"
 msgid "Privacy"
 msgstr "Privacy"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:790
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:790
 msgctxt "@info:tooltip"
 msgid "Should Cura check for updates when the program is started?"
 msgstr "Moet Cura op updates controleren wanneer het programma wordt gestart?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:795
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:795
 msgctxt "@option:check"
 msgid "Check for updates on start"
 msgstr "Bij starten op updates controleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:805
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:805
 msgctxt "@info:tooltip"
 msgid "Should anonymous data about your print be sent to Ultimaker? Note, no models, IP addresses or other personally identifiable information is sent or stored."
 msgstr "Mogen anonieme gegevens over uw print naar Ultimaker worden verzonden? Opmerking: er worden geen modellen, IP-adressen of andere persoonlijk identificeerbare gegevens verzonden of opgeslagen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:810
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:810
 msgctxt "@option:check"
 msgid "Send (anonymous) print information"
 msgstr "(Anonieme) printgegevens verzenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/GeneralPage.qml:819
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Preferences/GeneralPage.qml:819
 msgctxt "@action:button"
 msgid "More information"
 msgstr "Meer informatie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:40 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:108 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:84
-msgctxt "@action:button"
-msgid "Activate"
-msgstr "Activeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/MachinesPage.qml:63 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:152
-msgctxt "@action:button"
-msgid "Rename"
-msgstr "Hernoemen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:126
-msgctxt "@action:button"
-msgid "Create"
-msgstr "Maken"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:141
-msgctxt "@action:button"
-msgid "Duplicate"
-msgstr "Dupliceren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:171 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:167
-msgctxt "@action:button"
-msgid "Import"
-msgstr "Importeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:185 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:179
-msgctxt "@action:button"
-msgid "Export"
-msgstr "Exporteren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:234
-msgctxt "@action:label"
-msgid "Printer"
-msgstr "Printer"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:298 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:274
-msgctxt "@title:window"
-msgid "Confirm Remove"
-msgstr "Verwijderen Bevestigen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:301 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:275
-msgctxt "@label (%1 is object name)"
-msgid "Are you sure you wish to remove %1? This cannot be undone!"
-msgstr "Weet u zeker dat u %1 wilt verwijderen? Deze bewerking kan niet ongedaan worden gemaakt!"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:315 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:323
-msgctxt "@title:window"
-msgid "Import Material"
-msgstr "Materiaal Importeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:324
-msgctxt "@info:status Don't translate the XML tags <filename> or <message>!"
-msgid "Could not import material <filename>%1</filename>: <message>%2</message>"
-msgstr "Kon materiaal <filename>%1</filename> niet importeren: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewsSelector.qml:50
+msgctxt "@label"
+msgid "View type"
+msgstr "Type weergeven"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:328
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully imported material <filename>%1</filename>"
-msgstr "Materiaal <filename>%1</filename> is geïmporteerd"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:119
+msgctxt "@label:MonitorStatus"
+msgid "Not connected to a printer"
+msgstr "Niet met een printer verbonden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:346 /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:354
-msgctxt "@title:window"
-msgid "Export Material"
-msgstr "Materiaal Exporteren"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:123
+msgctxt "@label:MonitorStatus"
+msgid "Printer does not accept commands"
+msgstr "Printer accepteert geen opdrachten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:358
-msgctxt "@info:status Don't translate the XML tags <filename> and <message>!"
-msgid "Failed to export material to <filename>%1</filename>: <message>%2</message>"
-msgstr "Exporteren van materiaal naar <filename>%1</filename> is mislukt: <message>%2</message>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:133
+msgctxt "@label:MonitorStatus"
+msgid "In maintenance. Please check the printer"
+msgstr "In onderhoud. Controleer de printer"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsPage.qml:364
-msgctxt "@info:status Don't translate the XML tag <filename>!"
-msgid "Successfully exported material to <filename>%1</filename>"
-msgstr "Materiaal is geëxporteerd naar <filename>%1</filename>"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:144
+msgctxt "@label:MonitorStatus"
+msgid "Lost connection with the printer"
+msgstr "Verbinding met de printer is verbroken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:72
-msgctxt "@title"
-msgid "Information"
-msgstr "Informatie"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:146
+msgctxt "@label:MonitorStatus"
+msgid "Printing..."
+msgstr "Printen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:101
-msgctxt "@title:window"
-msgid "Confirm Diameter Change"
-msgstr "Diameterwijziging bevestigen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:149
+msgctxt "@label:MonitorStatus"
+msgid "Paused"
+msgstr "Gepauzeerd"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:102
-msgctxt "@label (%1 is a number)"
-msgid "The new filament diameter is set to %1 mm, which is not compatible with the current extruder. Do you wish to continue?"
-msgstr "Het nieuwe filament is ingesteld op %1 mm. Dit is niet compatibel met de huidige extruder. Wilt u verder gaan?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:152
+msgctxt "@label:MonitorStatus"
+msgid "Preparing..."
+msgstr "Voorbereiden..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:128
-msgctxt "@label"
-msgid "Display Name"
-msgstr "Naam"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:154
+msgctxt "@label:MonitorStatus"
+msgid "Please remove the print"
+msgstr "Verwijder de print"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:148
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:326
 msgctxt "@label"
-msgid "Material Type"
-msgstr "Type Materiaal"
+msgid "Abort Print"
+msgstr "Printen Afbreken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:158
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MonitorButton.qml:338
 msgctxt "@label"
-msgid "Color"
-msgstr "Kleur"
+msgid "Are you sure you want to abort the print?"
+msgstr "Weet u zeker dat u het printen wilt afbreken?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:208
-msgctxt "@label"
-msgid "Properties"
-msgstr "Eigenschappen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:68
+msgctxt "@label:textbox"
+msgid "Search settings"
+msgstr "Instellingen zoeken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:210
-msgctxt "@label"
-msgid "Density"
-msgstr "Dichtheid"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:456
+msgctxt "@action:menu"
+msgid "Copy value to all extruders"
+msgstr "Waarde naar alle extruders kopiëren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:225
-msgctxt "@label"
-msgid "Diameter"
-msgstr "Diameter"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:465
+msgctxt "@action:menu"
+msgid "Copy all changed values to all extruders"
+msgstr "Alle gewijzigde waarden naar alle extruders kopiëren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:259
-msgctxt "@label"
-msgid "Filament Cost"
-msgstr "Kostprijs Filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:502
+msgctxt "@action:menu"
+msgid "Hide this setting"
+msgstr "Deze instelling verbergen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:276
-msgctxt "@label"
-msgid "Filament weight"
-msgstr "Gewicht filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:515
+msgctxt "@action:menu"
+msgid "Don't show this setting"
+msgstr "Deze instelling verbergen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:294
-msgctxt "@label"
-msgid "Filament length"
-msgstr "Lengte filament"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingView.qml:519
+msgctxt "@action:menu"
+msgid "Keep this setting visible"
+msgstr "Deze instelling zichtbaar houden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:303
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingCategory.qml:200
 msgctxt "@label"
-msgid "Cost per Meter"
-msgstr "Kostprijs per meter"
+msgid ""
+"Some hidden settings use values different from their normal calculated value.\n"
+"\n"
+"Click to make these settings visible."
+msgstr ""
+"Een aantal verborgen instellingen gebruiken andere waarden dan hun normale berekende waarde.\n"
+"\n"
+"Klik om deze instellingen zichtbaar te maken."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:317
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:81
 msgctxt "@label"
-msgid "This material is linked to %1 and shares some of its properties."
-msgstr "Dit materiaal is gekoppeld aan %1 en deelt hiermee enkele eigenschappen."
+msgid "This setting is not used because all the settings that it influences are overridden."
+msgstr "Deze instelling wordt niet gebruikt omdat alle instellingen waarop deze invloed heeft, worden overschreven."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:324
-msgctxt "@label"
-msgid "Unlink Material"
-msgstr "Materiaal ontkoppelen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:86
+msgctxt "@label Header for list of settings."
+msgid "Affects"
+msgstr "Beïnvloedt"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:335
-msgctxt "@label"
-msgid "Description"
-msgstr "Beschrijving"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:91
+msgctxt "@label Header for list of settings."
+msgid "Affected By"
+msgstr "Beïnvloed door"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:348
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:187
 msgctxt "@label"
-msgid "Adhesion Information"
-msgstr "Gegevens Hechting"
+msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
+msgstr "Deze instelling wordt altijd door alle extruders gedeeld. Als u hier de instelling wijzigt, wordt de waarde voor alle extruders gewijzigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/Materials/MaterialsView.qml:374 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:19
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:191
 msgctxt "@label"
-msgid "Print settings"
-msgstr "Instellingen voor printen"
+msgid "This setting is resolved from conflicting extruder-specific values:"
+msgstr "Deze instelling wordt afgeleid van strijdige extruderspecifieke waarden:"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:104
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:230
 msgctxt "@label"
-msgid "Create"
-msgstr "Maken"
+msgid ""
+"This setting has a value that is different from the profile.\n"
+"\n"
+"Click to restore the value of the profile."
+msgstr ""
+"Deze instelling heeft een andere waarde dan in het profiel.\n"
+"\n"
+"Klik om de waarde van het profiel te herstellen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:121
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Settings/SettingItem.qml:329
 msgctxt "@label"
-msgid "Duplicate"
-msgstr "Dupliceren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:202
-msgctxt "@title:window"
-msgid "Create Profile"
-msgstr "Profiel Maken"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:204
-msgctxt "@info"
-msgid "Please provide a name for this profile."
-msgstr "Geef een naam op voor dit profiel."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:260
-msgctxt "@title:window"
-msgid "Duplicate Profile"
-msgstr "Profiel Dupliceren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:291
-msgctxt "@title:window"
-msgid "Rename Profile"
-msgstr "Profiel Hernoemen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:304
-msgctxt "@title:window"
-msgid "Import Profile"
-msgstr "Profiel Importeren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:333
-msgctxt "@title:window"
-msgid "Export Profile"
-msgstr "Profiel Exporteren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:396
-msgctxt "@label %1 is printer name"
-msgid "Printer: %1"
-msgstr "Printer: %1"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:554
-msgctxt "@action:button"
-msgid "Update profile with current settings/overrides"
-msgstr "Profiel bijwerken met huidige instellingen/overschrijvingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:561 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:244
-msgctxt "@action:button"
-msgid "Discard current changes"
-msgstr "Huidige wijzigingen verwijderen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:580
-msgctxt "@action:label"
-msgid "This profile uses the defaults specified by the printer, so it has no settings/overrides in the list below."
-msgstr "Dit profiel gebruikt de standaardinstellingen die door de printer zijn opgegeven, dus er zijn hiervoor geen instellingen/overschrijvingen in de onderstaande lijst."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:588
-msgctxt "@action:label"
-msgid "Your current settings match the selected profile."
-msgstr "Uw huidige instellingen komen overeen met het geselecteerde profiel."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfilesPage.qml:606
-msgctxt "@title:tab"
-msgid "Global Settings"
-msgstr "Algemene Instellingen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:61
-msgctxt "@info:status"
-msgid "Calculated"
-msgstr "Berekend"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:75
-msgctxt "@title:column"
-msgid "Setting"
-msgstr "Instelling"
+msgid ""
+"This setting is normally calculated, but it currently has an absolute value set.\n"
+"\n"
+"Click to restore the calculated value."
+msgstr ""
+"Deze instelling wordt normaliter berekend, maar is nu ingesteld op een absolute waarde.\n"
+"\n"
+"Klik om de berekende waarde te herstellen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:82
-msgctxt "@title:column"
-msgid "Profile"
-msgstr "Profiel"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:27
+msgctxt "@info:tooltip"
+msgid "3D View"
+msgstr "3D-weergave"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:89
-msgctxt "@title:column"
-msgid "Current"
-msgstr "Huidig"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:40
+msgctxt "@info:tooltip"
+msgid "Front View"
+msgstr "Weergave voorzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/ProfileTab.qml:97
-msgctxt "@title:column"
-msgid "Unit"
-msgstr "Eenheid"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:53
+msgctxt "@info:tooltip"
+msgid "Top View"
+msgstr "Weergave bovenzijde"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:14
-msgctxt "@title:tab"
-msgid "Setting Visibility"
-msgstr "Zichtbaarheid Instellen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:66
+msgctxt "@info:tooltip"
+msgid "Left View"
+msgstr "Linkeraanzicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Preferences/SettingVisibilityPage.qml:46
-msgctxt "@label:textbox"
-msgid "Check all"
-msgstr "Alles aanvinken"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ViewOrientationControls.qml:79
+msgctxt "@info:tooltip"
+msgid "Right View"
+msgstr "Rechteraanzicht"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:41
 msgctxt "@label"
 msgid "Extruder"
 msgstr "Extruder"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:71
 msgctxt "@tooltip"
 msgid "The target temperature of the hotend. The hotend will heat up or cool down towards this temperature. If this is 0, the hotend heating is turned off."
 msgstr "De doeltemperatuur van de hot-end. De hot-end wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van de hot-end uitgeschakeld."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:103
 msgctxt "@tooltip"
 msgid "The current temperature of this hotend."
 msgstr "De huidige temperatuur van dit hotend."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:177
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the hotend to."
 msgstr "De temperatuur waarnaar het hotend moet worden voorverwarmd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:341
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:332
 msgctxt "@button Cancel pre-heating"
 msgid "Cancel"
 msgstr "Annuleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344 /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:344
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:335
 msgctxt "@button"
 msgid "Pre-heat"
 msgstr "Voorverwarmen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:370
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the hotend in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the hotend to heat up when you're ready to print."
 msgstr "Verwarm het hotend voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het hotend wordt verwarmd. Zo hoeft u niet te wachten totdat het hotend is opgewarmd wanneer u gereed bent om te printen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:406
 msgctxt "@tooltip"
 msgid "The colour of the material in this extruder."
 msgstr "De kleur van het materiaal in deze extruder."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:438
 msgctxt "@tooltip"
 msgid "The material in this extruder."
 msgstr "Het materiaal in deze extruder."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ExtruderBox.qml:470
 msgctxt "@tooltip"
 msgid "The nozzle inserted in this extruder."
 msgstr "De nozzle die in deze extruder geplaatst is."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:26
 msgctxt "@label"
 msgid "Build plate"
 msgstr "Platform"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:56
 msgctxt "@tooltip"
 msgid "The target temperature of the heated bed. The bed will heat up or cool down towards this temperature. If this is 0, the bed heating is turned off."
 msgstr "De doeltemperatuur van het verwarmde bed. Het bed wordt verwarmd of afgekoeld totdat deze temperatuur bereikt is. Als deze waarde ingesteld is op 0, wordt de verwarming van het bed uitgeschakeld."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:88
 msgctxt "@tooltip"
 msgid "The current temperature of the heated bed."
 msgstr "De huidige temperatuur van het verwarmde bed."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:161
 msgctxt "@tooltip of temperature input"
 msgid "The temperature to pre-heat the bed to."
 msgstr "De temperatuur waarnaar het bed moet worden voorverwarmd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/HeatedBedBox.qml:361
 msgctxt "@tooltip of pre-heat"
 msgid "Heat the bed in advance before printing. You can continue adjusting your print while it is heating, and you won't have to wait for the bed to heat up when you're ready to print."
 msgstr "Verwarm het bed voordat u gaat printen. U kunt doorgaan met het aanpassen van uw print terwijl het bed wordt verwarmd. Zo hoeft u niet te wachten totdat het bed opgewarmd is wanneer u gereed bent om te printen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:52
 msgctxt "@label"
 msgid "Printer control"
 msgstr "Printerbediening"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:67
 msgctxt "@label"
 msgid "Jog Position"
 msgstr "Jog-positie"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:85
 msgctxt "@label"
 msgid "X/Y"
 msgstr "X/Y"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:192
 msgctxt "@label"
 msgid "Z"
 msgstr "Z"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:257
 msgctxt "@label"
 msgid "Jog Distance"
 msgstr "Jog-afstand"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:301
 msgctxt "@label"
 msgid "Send G-code"
 msgstr "G-code verzenden"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/ManualPrinterControl.qml:365
 msgctxt "@tooltip of G-code command input"
 msgid "Send a custom G-code command to the connected printer. Press 'enter' to send the command."
 msgstr "Verzend een aangepaste G-code-opdracht naar de verbonden printer. Druk op Enter om de opdracht te verzenden."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterOutput/OutputDeviceHeader.qml:55
 msgctxt "@info:status"
 msgid "The printer is not connected."
 msgstr "Er is geen verbinding met de printer."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
-msgctxt "@status"
-msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
-msgstr "De cloudprinter is offline. Controleer of de printer is ingeschakeld en verbonden is met internet."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
-msgctxt "@status"
-msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
-msgstr "Deze printer is niet gekoppeld aan uw account. Ga naar de Ultimaker Digital Factory om een verbinding tot stand te brengen."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
-msgstr "De cloudverbinding is momenteel niet beschikbaar. Log in om verbinding te maken met de cloudprinter."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
-msgctxt "@status"
-msgid "The cloud connection is currently unavailable. Please check your internet connection."
-msgstr "De cloudverbinding is momenteel niet beschikbaar. Controleer uw internetverbinding."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
-msgctxt "@button"
-msgid "Add printer"
-msgstr "Printer toevoegen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
-msgctxt "@button"
-msgid "Manage printers"
-msgstr "Printers beheren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Connected printers"
-msgstr "Verbonden printers"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
-msgctxt "@label"
-msgid "Preset printers"
-msgstr "Vooraf ingestelde printers"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:140
-msgctxt "@label"
-msgid "Active print"
-msgstr "Actieve print"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:148
-msgctxt "@label"
-msgid "Job Name"
-msgstr "Taaknaam"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:156
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:114
 msgctxt "@label"
-msgid "Printing Time"
-msgstr "Printtijd"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintMonitor.qml:164
-msgctxt "@label"
-msgid "Estimated time left"
-msgstr "Geschatte resterende tijd"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:47
-msgctxt "@label"
-msgid "Profile"
-msgstr "Profiel"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/CustomPrintSetup.qml:170
-msgctxt "@tooltip"
-msgid ""
-"Some setting/override values are different from the values stored in the profile.\n"
-"\n"
-"Click to open the profile manager."
-msgstr ""
-"Sommige waarden of aanpassingen van instellingen zijn anders dan de waarden die in het profiel zijn opgeslagen.\n"
-"\n"
-"Klik om het profielbeheer te openen."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Custom/QualitiesWithIntentMenu.qml:146
-msgctxt "@label:header"
-msgid "Custom profiles"
-msgstr "Aangepaste profielen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/NoIntentIcon.qml:31
-msgctxt "@label %1 is filled in with the type of a profile. %2 is filled with a list of numbers (eg '1' or '1, 2')"
-msgid "There is no %1 profile for the configuration in extruder %2. The default intent will be used instead"
-msgid_plural "There is no %1 profile for the configurations in extruders %2. The default intent will be used instead"
-msgstr[0] "Er is geen %1 profiel voor de configuratie in extruder %2. In plaats daarvan wordt de standaardintentie gebruikt"
-msgstr[1] "Er is geen %1 profiel voor de configuraties in extruders %2. In plaats daarvan wordt de standaardintentie gebruikt"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelector.qml:21
-msgctxt "@label shown when we load a Gcode file"
-msgid "Print setup disabled. G-code file can not be modified."
-msgstr "De printinstelling is uitgeschakeld. Het G-code-bestand kan niet worden gewijzigd."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:144
-msgctxt "@button"
-msgid "Recommended"
-msgstr "Aanbevolen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorContents.qml:158
-msgctxt "@button"
-msgid "Custom"
-msgstr "Aangepast"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:13
-msgctxt "@label:Should be short"
-msgid "On"
-msgstr "Aan"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:14
-msgctxt "@label:Should be short"
-msgid "Off"
-msgstr "Uit"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/PrintSetupSelectorHeader.qml:33
-msgctxt "@label"
-msgid "Experimental"
-msgstr "Experimenteel"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:29
-msgctxt "@label"
-msgid "Adhesion"
-msgstr "Hechting"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedAdhesionSelector.qml:74
-msgctxt "@label"
-msgid "Enable printing a brim or raft. This will add a flat area around or under your object which is easy to cut off afterwards."
-msgstr "Het printen van een brim of raft inschakelen. Deze optie zorgt ervoor dat er extra materiaal rondom of onder het object wordt neergelegd, dat er naderhand eenvoudig kan worden afgesneden."
+msgid "Is printed as support."
+msgstr "Is geprint als support."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:117
 msgctxt "@label"
-msgid "Gradual infill"
-msgstr "Geleidelijke vulling"
+msgid "Other models overlapping with this model are modified."
+msgstr "Andere modellen die met dit model overlappen, zijn gewijzigd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedInfillDensitySelector.qml:232
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:120
 msgctxt "@label"
-msgid "Gradual infill will gradually increase the amount of infill towards the top."
-msgstr "Met geleidelijke vulling neemt de hoeveelheid vulling naar boven toe."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedQualityProfileSelector.qml:81
-msgctxt "@tooltip"
-msgid "You have modified some profile settings. If you want to change these go to custom mode."
-msgstr "U hebt enkele profielinstellingen aangepast. Ga naar de aangepaste modus als u deze wilt wijzigen."
+msgid "Infill overlapping with this model is modified."
+msgstr "De vulling die met dit model overlapt, is aangepast."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:30
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:123
 msgctxt "@label"
-msgid "Support"
-msgstr "Supportstructuur"
+msgid "Overlaps with this model are not supported."
+msgstr "Overlappingen worden in dit model niet ondersteund."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/PrintSetupSelector/Recommended/RecommendedSupportSelector.qml:71
-msgctxt "@label"
-msgid "Generate structures to support parts of the model which have overhangs. Without these structures, such parts would collapse during printing."
-msgstr "Genereer structuren om delen van het model met overhang te ondersteunen. Zonder deze structuren zakken dergelijke delen in tijdens het printen."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ObjectItemButton.qml:130
+msgctxt "@label %1 is the number of settings it overrides."
+msgid "Overrides %1 setting."
+msgid_plural "Overrides %1 settings."
+msgstr[0] "Overschrijft %1 instelling."
+msgstr[1] "Overschrijft %1 instellingen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingCategory.qml:200
-msgctxt "@label"
-msgid ""
-"Some hidden settings use values different from their normal calculated value.\n"
-"\n"
-"Click to make these settings visible."
-msgstr ""
-"Een aantal verborgen instellingen gebruiken andere waarden dan hun normale berekende waarde.\n"
-"\n"
-"Klik om deze instellingen zichtbaar te maken."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/MainWindowHeader.qml:90
+msgctxt "@action:button"
+msgid "Marketplace"
+msgstr "Marktplaats"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:81
-msgctxt "@label"
-msgid "This setting is not used because all the settings that it influences are overridden."
-msgstr "Deze instelling wordt niet gebruikt omdat alle instellingen waarop deze invloed heeft, worden overschreven."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:31
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Edit"
+msgstr "B&ewerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:86
-msgctxt "@label Header for list of settings."
-msgid "Affects"
-msgstr "Beïnvloedt"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:56
+msgctxt "@title:menu menubar:toplevel"
+msgid "E&xtensions"
+msgstr "E&xtensies"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:91
-msgctxt "@label Header for list of settings."
-msgid "Affected By"
-msgstr "Beïnvloed door"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:94
+msgctxt "@title:menu menubar:toplevel"
+msgid "P&references"
+msgstr "Voo&rkeuren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:187
-msgctxt "@label"
-msgid "This setting is always shared between all extruders. Changing it here will change the value for all extruders."
-msgstr "Deze instelling wordt altijd door alle extruders gedeeld. Als u hier de instelling wijzigt, wordt de waarde voor alle extruders gewijzigd."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:102
+msgctxt "@title:menu menubar:toplevel"
+msgid "&Help"
+msgstr "&Help"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:191
-msgctxt "@label"
-msgid "This setting is resolved from conflicting extruder-specific values:"
-msgstr "Deze instelling wordt afgeleid van strijdige extruderspecifieke waarden:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:148
+msgctxt "@title:window"
+msgid "New project"
+msgstr "Nieuw project"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:230
-msgctxt "@label"
-msgid ""
-"This setting has a value that is different from the profile.\n"
-"\n"
-"Click to restore the value of the profile."
-msgstr ""
-"Deze instelling heeft een andere waarde dan in het profiel.\n"
-"\n"
-"Klik om de waarde van het profiel te herstellen."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/MainWindow/ApplicationMenu.qml:149
+msgctxt "@info:question"
+msgid "Are you sure you want to start a new project? This will clear the build plate and any unsaved settings."
+msgstr "Weet u zeker dat u een nieuw project wilt starten? Hiermee wordt het platform leeggemaakt en worden eventuele niet-opgeslagen instellingen verwijderd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingItem.qml:329
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:257
 msgctxt "@label"
-msgid ""
-"This setting is normally calculated, but it currently has an absolute value set.\n"
-"\n"
-"Click to restore the calculated value."
-msgstr ""
-"Deze instelling wordt normaliter berekend, maar is nu ingesteld op een absolute waarde.\n"
-"\n"
-"Klik om de berekende waarde te herstellen."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:68
-msgctxt "@label:textbox"
-msgid "Search settings"
-msgstr "Instellingen zoeken"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:456
-msgctxt "@action:menu"
-msgid "Copy value to all extruders"
-msgstr "Waarde naar alle extruders kopiëren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:465
-msgctxt "@action:menu"
-msgid "Copy all changed values to all extruders"
-msgstr "Alle gewijzigde waarden naar alle extruders kopiëren"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:502
-msgctxt "@action:menu"
-msgid "Hide this setting"
-msgstr "Deze instelling verbergen"
+msgid "This package will be installed after restarting."
+msgstr "Dit package wordt na opnieuw starten geïnstalleerd."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:515
-msgctxt "@action:menu"
-msgid "Don't show this setting"
-msgstr "Deze instelling verbergen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:453
+msgctxt "@title:tab"
+msgid "Settings"
+msgstr "Instellingen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/Settings/SettingView.qml:519
-msgctxt "@action:menu"
-msgid "Keep this setting visible"
-msgstr "Deze instelling zichtbaar houden"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:576
+msgctxt "@title:window %1 is the application name"
+msgid "Closing %1"
+msgstr "%1 wordt gesloten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:27
-msgctxt "@info:tooltip"
-msgid "3D View"
-msgstr "3D-weergave"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:577
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:589
+msgctxt "@label %1 is the application name"
+msgid "Are you sure you want to exit %1?"
+msgstr "Weet u zeker dat u %1 wilt afsluiten?"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:40
-msgctxt "@info:tooltip"
-msgid "Front View"
-msgstr "Weergave voorzijde"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:737
+msgctxt "@window:title"
+msgid "Install Package"
+msgstr "Package installeren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:53
-msgctxt "@info:tooltip"
-msgid "Top View"
-msgstr "Weergave bovenzijde"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:745
+msgctxt "@title:window"
+msgid "Open File(s)"
+msgstr "Bestand(en) openen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:66
-msgctxt "@info:tooltip"
-msgid "Left View"
-msgstr "Linkeraanzicht"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:748
+msgctxt "@text:window"
+msgid "We have found one or more G-Code files within the files you have selected. You can only open one G-Code file at a time. If you want to open a G-Code file, please just select only one."
+msgstr "Binnen de door u geselecteerde bestanden zijn een of meer G-code-bestanden aangetroffen. U kunt maximaal één G-code-bestand tegelijk openen. Selecteer maximaal één bestand als u dit wilt openen als G-code-bestand."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewOrientationControls.qml:79
-msgctxt "@info:tooltip"
-msgid "Right View"
-msgstr "Rechteraanzicht"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:857
+msgctxt "@title:window"
+msgid "Add Printer"
+msgstr "Printer Toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/ViewsSelector.qml:50
-msgctxt "@label"
-msgid "View type"
-msgstr "Type weergeven"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/Cura.qml:865
+msgctxt "@title:window"
+msgid "What's New"
+msgstr "Nieuwe functies"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:47
-msgctxt "@label"
-msgid "Add a Cloud printer"
-msgstr "Een cloudprinter toevoegen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:47
+msgctxt "@status"
+msgid "The cloud printer is offline. Please check if the printer is turned on and connected to the internet."
+msgstr "De cloudprinter is offline. Controleer of de printer is ingeschakeld en verbonden is met internet."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:74
-msgctxt "@label"
-msgid "Waiting for Cloud response"
-msgstr "Wachten op cloudreactie"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:51
+msgctxt "@status"
+msgid "This printer is not linked to your account. Please visit the Ultimaker Digital Factory to establish a connection."
+msgstr "Deze printer is niet gekoppeld aan uw account. Ga naar de Ultimaker Digital Factory om een verbinding tot stand te brengen."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:86
-msgctxt "@label"
-msgid "No printers found in your account?"
-msgstr "Geen printers gevonden in uw account?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:56
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please sign in to connect to the cloud printer."
+msgstr "De cloudverbinding is momenteel niet beschikbaar. Log in om verbinding te maken met de cloudprinter."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:121
-msgctxt "@label"
-msgid "The following printers in your account have been added in Cura:"
-msgstr "De volgende printers in uw account zijn toegevoegd in Cura:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:60
+msgctxt "@status"
+msgid "The cloud connection is currently unavailable. Please check your internet connection."
+msgstr "De cloudverbinding is momenteel niet beschikbaar. Controleer uw internetverbinding."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:204
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:238
 msgctxt "@button"
-msgid "Add printer manually"
-msgstr "Printer handmatig toevoegen"
+msgid "Add printer"
+msgstr "Printer toevoegen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddCloudPrintersView.qml:218
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelector.qml:255
 msgctxt "@button"
-msgid "Finish"
-msgstr "Voltooien"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:230
-msgctxt "@label"
-msgid "Manufacturer"
-msgstr "Fabrikant"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:247
-msgctxt "@label"
-msgid "Profile author"
-msgstr "Profieleigenaar"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:265
-msgctxt "@label"
-msgid "Printer name"
-msgstr "Printernaam"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddLocalPrinterScrollView.qml:274
-msgctxt "@text"
-msgid "Please name your printer"
-msgstr "Geef uw printer een naam"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:24
-msgctxt "@label"
-msgid "Add a printer"
-msgstr "Een printer toevoegen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:39
-msgctxt "@label"
-msgid "Add a networked printer"
-msgstr "Een netwerkprinter toevoegen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkOrLocalPrinterContent.qml:90
-msgctxt "@label"
-msgid "Add a non-networked printer"
-msgstr "Een niet-netwerkprinter toevoegen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:43
-msgctxt "@label"
-msgid "There is no printer found over your network."
-msgstr "Kan in uw netwerk geen printer vinden."
+msgid "Manage printers"
+msgstr "Printers beheren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:182
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Refresh"
-msgstr "Vernieuwen"
+msgid "Connected printers"
+msgstr "Verbonden printers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:193
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/PrinterSelector/MachineSelectorList.qml:19
 msgctxt "@label"
-msgid "Add printer by IP"
-msgstr "Printer toevoegen op IP"
+msgid "Preset printers"
+msgstr "Vooraf ingestelde printers"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:204
-msgctxt "@label"
-msgid "Add cloud printer"
-msgstr "Een cloudprinter toevoegen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ExtruderButton.qml:16
+msgctxt "@label %1 is filled in with the name of an extruder"
+msgid "Print Selected Model with %1"
+msgid_plural "Print Selected Models with %1"
+msgstr[0] "Geselecteerd model printen met %1"
+msgstr[1] "Geselecteerde modellen printen met %1"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddNetworkPrinterScrollView.qml:240
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:31
 msgctxt "@label"
-msgid "Troubleshooting"
-msgstr "Probleemoplossing"
+msgid "Time estimation"
+msgstr "Tijdschatting"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:70
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:114
 msgctxt "@label"
-msgid "Add printer by IP address"
-msgstr "Een printer toevoegen op IP-adres"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:133
-msgctxt "@text"
-msgid "Enter your printer's IP address."
-msgstr "Voer het IP-adres van uw printer in."
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:158
-msgctxt "@button"
-msgid "Add"
-msgstr "Toevoegen"
+msgid "Material estimation"
+msgstr "Materiaalschatting"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:206
-msgctxt "@label"
-msgid "Could not connect to device."
-msgstr "Kan geen verbinding maken met het apparaat."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:164
+msgctxt "@label m for meter"
+msgid "%1m"
+msgstr "%1 m"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:207 /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:212
-msgctxt "@label"
-msgid "Can't connect to your Ultimaker printer?"
-msgstr "Kunt u geen verbinding maken met uw Ultimaker-printer?"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/PrintJobInformation.qml:165
+msgctxt "@label g for grams"
+msgid "%1g"
+msgstr "%1 g"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:211
-msgctxt "@label"
-msgid "The printer at this address has not responded yet."
-msgstr "De printer op dit adres heeft nog niet gereageerd."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:55
+msgctxt "@label:PrintjobStatus"
+msgid "Slicing..."
+msgstr "Slicen..."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:245
-msgctxt "@label"
-msgid "This printer cannot be added because it's an unknown printer or it's not the host of a group."
-msgstr "Kan de printer niet toevoegen omdat het een onbekende printer is of omdat het niet de host in een groep is."
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:67
+msgctxt "@label:PrintjobStatus"
+msgid "Unable to slice"
+msgstr "Kan niet slicen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:334
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Back"
-msgstr "Terug"
+msgid "Processing"
+msgstr "Verwerken"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/AddPrinterByIpContent.qml:347
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:103
 msgctxt "@button"
-msgid "Connect"
-msgstr "Verbinding maken"
+msgid "Slice"
+msgstr "Slicen"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:43
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:104
 msgctxt "@label"
-msgid "Ultimaker Account"
-msgstr "Ultimaker-account"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:84
-msgctxt "@text"
-msgid "Your key to connected 3D printing"
-msgstr "Uw sleutel tot verbonden 3D-printen"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:101
-msgctxt "@text"
-msgid "- Customize your experience with more print profiles and plugins"
-msgstr "- Pas uw ervaring aan met meer printprofielen en plug-ins"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:104
-msgctxt "@text"
-msgid "- Stay flexible by syncing your setup and loading it anywhere"
-msgstr "- Blijf flexibel door uw instellingen te synchroniseren en overal te laden"
-
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:107
-msgctxt "@text"
-msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
-msgstr "- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers"
+msgid "Start the slicing process"
+msgstr "Het sliceproces starten"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/CloudContent.qml:157
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/SliceProcessWidget.qml:118
 msgctxt "@button"
-msgid "Skip"
-msgstr "Overslaan"
+msgid "Cancel"
+msgstr "Annuleren"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:24
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:59
 msgctxt "@label"
-msgid "Help us to improve Ultimaker Cura"
-msgstr "Help ons Ultimaker Cura te verbeteren"
+msgid "No time estimation available"
+msgstr "Geen tijdschatting beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:57
-msgctxt "@text"
-msgid "Ultimaker Cura collects anonymous data to improve print quality and user experience, including:"
-msgstr "Ultimaker Cura verzamelt anonieme gegevens om de printkwaliteit en gebruikerservaring te verbeteren, waaronder:"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:77
+msgctxt "@label"
+msgid "No cost estimation available"
+msgstr "Geen kostenraming beschikbaar"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:71
-msgctxt "@text"
-msgid "Machine types"
-msgstr "Machinetypen"
+#: /mnt/projects/ultimaker/cura/Cura/resources/qml/ActionPanel/OutputProcessWidget.qml:127
+msgctxt "@button"
+msgid "Preview"
+msgstr "Voorbeeld"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:77
-msgctxt "@text"
-msgid "Material usage"
-msgstr "Materiaalgebruik"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "description"
+msgid "Provides removable drive hotplugging and writing support."
+msgstr "Biedt hotplug- en schrijfondersteuning voor verwisselbare stations."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:83
-msgctxt "@text"
-msgid "Number of slices"
-msgstr "Aantal slices"
+#: RemovableDriveOutputDevice/plugin.json
+msgctxt "name"
+msgid "Removable Drive Output Device Plugin"
+msgstr "Invoegtoepassing voor Verwijderbaar uitvoerapparaat"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:89
-msgctxt "@text"
-msgid "Print settings"
-msgstr "Instellingen voor printen"
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.5 naar Cura 4.0."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:102
-msgctxt "@text"
-msgid "Data collected by Ultimaker Cura will not contain any personal information."
-msgstr "De gegevens die Ultimaker Cura verzamelt, bevatten geen persoonlijke informatie."
+#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 3.5 to 4.0"
+msgstr "Versie-upgrade van 3.5 naar 4.0"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DataCollectionsContent.qml:103
-msgctxt "@text"
-msgid "More information"
-msgstr "Meer informatie"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.2 naar Cura 4.7."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/DropDownWidget.qml:93
-msgctxt "@label"
-msgid "Empty"
-msgstr "Leeg"
+#: VersionUpgrade/VersionUpgrade462to47/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.2 to 4.7"
+msgstr "Versie-upgrade van 4.6.2 naar 4.7"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:23
-msgctxt "@label"
-msgid "User Agreement"
-msgstr "Gebruikersovereenkomst"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.2 naar Cura 2.4."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/UserAgreementContent.qml:70
-msgctxt "@button"
-msgid "Decline and close"
-msgstr "Afwijzen en sluiten"
+#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 2.2 to 2.4"
+msgstr "Versie-upgrade van 2.2 naar 2.4"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:29
-msgctxt "@label"
-msgid "Welcome to Ultimaker Cura"
-msgstr "Welkom bij Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.2 naar Cura 4.3."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:47
-msgctxt "@text"
-msgid ""
-"Please follow these steps to set up\n"
-"Ultimaker Cura. This will only take a few moments."
-msgstr ""
-"Volg deze stappen voor het instellen van\n"
-"Ultimaker Cura. Dit duurt slechts even."
+#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.2 to 4.3"
+msgstr "Versie-upgrade van 4.2 naar 4.3"
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WelcomeContent.qml:58
-msgctxt "@button"
-msgid "Get started"
-msgstr "Aan de slag"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "description"
+msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.0 naar Cura 4.6.2."
 
-#: /home/trin/Gedeeld/Projects/Cura/resources/qml/WelcomePages/WhatsNewContent.qml:24
-msgctxt "@label"
-msgid "What's new in Ultimaker Cura"
-msgstr "Nieuwe functies in Ultimaker Cura"
+#: VersionUpgrade/VersionUpgrade460to462/plugin.json
+msgctxt "name"
+msgid "Version Upgrade 4.6.0 to 4.6.2"
+msgstr "Versie-upgrade van 4.6.0 naar 4.6.2"
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "description"
-msgid "Checks models and print configuration for possible printing issues and give suggestions."
-msgstr "Via deze optie controleert u de modellen en de printconfiguratie op mogelijke printproblemen en ontvangt u suggesties."
+msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.0 naar Cura 3.1."
 
-#: ModelChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade30to31/plugin.json
 msgctxt "name"
-msgid "Model Checker"
-msgstr "Modelcontrole"
+msgid "Version Upgrade 3.0 to 3.1"
+msgstr "Versie-upgrade van 3.0 naar 3.1"
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "description"
-msgid "Provides support for reading 3MF files."
-msgstr "Biedt ondersteuning voor het lezen van 3MF-bestanden."
+msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.0 naar Cura 4.1."
 
-#: 3MFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade40to41/plugin.json
 msgctxt "name"
-msgid "3MF Reader"
-msgstr "3MF-lezer"
+msgid "Version Upgrade 4.0 to 4.1"
+msgstr "Versie-upgrade van 4.0 naar 4.1"
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "description"
-msgid "Provides support for writing 3MF files."
-msgstr "Biedt ondersteuning voor het schrijven van 3MF-bestanden."
+msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.6 naar Cura 2.7."
 
-#: 3MFWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade26to27/plugin.json
 msgctxt "name"
-msgid "3MF Writer"
-msgstr "3MF-schrijver"
+msgid "Version Upgrade 2.6 to 2.7"
+msgstr "Versie-upgrade van 2.6 naar 2.7"
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "description"
-msgid "Provides support for reading AMF files."
-msgstr "Biedt ondersteuning voor het lezen van AMF-bestanden."
+msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.5 naar Cura 2.6."
 
-#: AMFReader/plugin.json
+#: VersionUpgrade/VersionUpgrade25to26/plugin.json
 msgctxt "name"
-msgid "AMF Reader"
-msgstr "AMF-lezer"
+msgid "Version Upgrade 2.5 to 2.6"
+msgstr "Versie-upgrade van 2.5 naar 2.6"
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "description"
-msgid "Backup and restore your configuration."
-msgstr "Een back-up maken van uw configuratie en deze herstellen."
+msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.1 naar Cura 4.2."
 
-#: CuraDrive/plugin.json
+#: VersionUpgrade/VersionUpgrade41to42/plugin.json
 msgctxt "name"
-msgid "Cura Backups"
-msgstr "Cura-back-ups"
+msgid "Version Upgrade 4.1 to 4.2"
+msgstr "Versie-upgrade van 4.1 naar 4.2"
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "description"
-msgid "Provides the link to the CuraEngine slicing backend."
-msgstr "Voorziet in de koppeling naar het slicing-back-end van de CuraEngine."
+msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.1 naar Cura 2.2."
 
-#: CuraEngineBackend/plugin.json
+#: VersionUpgrade/VersionUpgrade21to22/plugin.json
 msgctxt "name"
-msgid "CuraEngine Backend"
-msgstr "CuraEngine-back-end"
+msgid "Version Upgrade 2.1 to 2.2"
+msgstr "Versie-upgrade van 2.1 naar 2.2"
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "description"
-msgid "Provides support for importing Cura profiles."
-msgstr "Biedt ondersteuning bij het importeren van Cura-profielen."
+msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.2 naar Cura 3.3."
 
-#: CuraProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade32to33/plugin.json
 msgctxt "name"
-msgid "Cura Profile Reader"
-msgstr "Cura-profiellezer"
+msgid "Version Upgrade 3.2 to 3.3"
+msgstr "Versie-upgrade van 3.2 naar 3.3"
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "description"
-msgid "Provides support for exporting Cura profiles."
-msgstr "Biedt ondersteuning voor het exporteren van Cura-profielen."
+msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.5 naar Cura 4.6."
 
-#: CuraProfileWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade45to46/plugin.json
 msgctxt "name"
-msgid "Cura Profile Writer"
-msgstr "Cura-profielschrijver"
+msgid "Version Upgrade 4.5 to 4.6"
+msgstr "Versie-upgrade van 4.5 naar 4.6"
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "description"
-msgid "Checks for firmware updates."
-msgstr "Controleert op firmware-updates."
+msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.4 naar Cura 4.5."
 
-#: FirmwareUpdateChecker/plugin.json
+#: VersionUpgrade/VersionUpgrade44to45/plugin.json
 msgctxt "name"
-msgid "Firmware Update Checker"
-msgstr "Firmware-updatecontrole"
+msgid "Version Upgrade 4.4 to 4.5"
+msgstr "Versie-upgrade van 4.4 naar 4.5"
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "description"
-msgid "Provides a machine actions for updating firmware."
-msgstr "Biedt machineacties voor het bijwerken van de firmware."
+msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.8."
 
-#: FirmwareUpdater/plugin.json
+#: VersionUpgrade/VersionUpgrade47to48/plugin.json
 msgctxt "name"
-msgid "Firmware Updater"
-msgstr "Firmware-updater"
+msgid "Version Upgrade 4.7 to 4.8"
+msgstr "Versie-upgrade van 4.7 naar 4.8"
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "description"
-msgid "Reads g-code from a compressed archive."
-msgstr "Hiermee leest u G-code uit een gecomprimeerd archief."
+msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.3 naar Cura 3.4."
 
-#: GCodeGzReader/plugin.json
+#: VersionUpgrade/VersionUpgrade33to34/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Reader"
-msgstr "Lezer voor gecomprimeerde G-code"
+msgid "Version Upgrade 3.3 to 3.4"
+msgstr "Versie-upgrade van 3.3 naar 3.4"
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a compressed archive."
-msgstr "Met deze optie schrijft u G-code naar een gecomprimeerd archief."
+msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.3 naar Cura 4.4."
 
-#: GCodeGzWriter/plugin.json
+#: VersionUpgrade/VersionUpgrade43to44/plugin.json
 msgctxt "name"
-msgid "Compressed G-code Writer"
-msgstr "Schrijver voor gecomprimeerde G-code"
+msgid "Version Upgrade 4.3 to 4.4"
+msgstr "Versie-upgrade van 4.3 naar 4.4"
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from g-code files."
-msgstr "Biedt ondersteuning voor het importeren van profielen uit G-code-bestanden."
+msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.4 naar Cura 3.5."
 
-#: GCodeProfileReader/plugin.json
+#: VersionUpgrade/VersionUpgrade34to35/plugin.json
 msgctxt "name"
-msgid "G-code Profile Reader"
-msgstr "G-code-profiellezer"
+msgid "Version Upgrade 3.4 to 3.5"
+msgstr "Versie-upgrade van 3.4 naar 3.5"
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "description"
-msgid "Allows loading and displaying G-code files."
-msgstr "Hiermee kunt u G-code-bestanden laden en weergeven."
+msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
+msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.7 naar Cura 3.0."
 
-#: GCodeReader/plugin.json
+#: VersionUpgrade/VersionUpgrade27to30/plugin.json
 msgctxt "name"
-msgid "G-code Reader"
-msgstr "G-code-lezer"
+msgid "Version Upgrade 2.7 to 3.0"
+msgstr "Versie-upgrade van 2.7 naar 3.0"
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "description"
-msgid "Writes g-code to a file."
-msgstr "Met deze optie schrijft u G-code naar een bestand."
+msgid "Provides support for reading AMF files."
+msgstr "Biedt ondersteuning voor het lezen van AMF-bestanden."
 
-#: GCodeWriter/plugin.json
+#: AMFReader/plugin.json
 msgctxt "name"
-msgid "G-code Writer"
-msgstr "G-code-schrijver"
+msgid "AMF Reader"
+msgstr "AMF-lezer"
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "description"
-msgid "Enables ability to generate printable geometry from 2D image files."
-msgstr "Hiermee wordt het genereren van printbare geometrie van 2D-afbeeldingsbestanden mogelijk."
+msgid "Provides support for importing profiles from g-code files."
+msgstr "Biedt ondersteuning voor het importeren van profielen uit G-code-bestanden."
 
-#: ImageReader/plugin.json
+#: GCodeProfileReader/plugin.json
 msgctxt "name"
-msgid "Image Reader"
-msgstr "Afbeeldinglezer"
+msgid "G-code Profile Reader"
+msgstr "G-code-profiellezer"
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "description"
-msgid "Provides support for importing profiles from legacy Cura versions."
-msgstr "Biedt ondersteuning voor het importeren van profielen uit oudere Cura-versies."
+msgid "Provides a machine actions for updating firmware."
+msgstr "Biedt machineacties voor het bijwerken van de firmware."
 
-#: LegacyProfileReader/plugin.json
+#: FirmwareUpdater/plugin.json
 msgctxt "name"
-msgid "Legacy Cura Profile Reader"
-msgstr "Lezer voor Profielen van oudere Cura-versies"
+msgid "Firmware Updater"
+msgstr "Firmware-updater"
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "description"
-msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
-msgstr "Biedt een manier om de machine-instellingen (zoals bouwvolume, maat nozzle, enz.) te wijzigen."
+msgid "Provides support for reading X3D files."
+msgstr "Deze optie biedt ondersteuning voor het lezen van X3D-bestanden."
 
-#: MachineSettingsAction/plugin.json
+#: X3DReader/plugin.json
 msgctxt "name"
-msgid "Machine Settings Action"
-msgstr "Actie machine-instellingen"
+msgid "X3D Reader"
+msgstr "X3D-lezer"
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "description"
-msgid "Provides a monitor stage in Cura."
-msgstr "Deze optie biedt een controlestadium in Cura."
+msgid "Find, manage and install new Cura packages."
+msgstr "Nieuwe Cura-packages zoeken, beheren en installeren."
 
-#: MonitorStage/plugin.json
+#: Toolbox/plugin.json
 msgctxt "name"
-msgid "Monitor Stage"
-msgstr "Controlestadium"
+msgid "Toolbox"
+msgstr "Werkset"
 
 #: PerObjectSettingsTool/plugin.json
 msgctxt "description"
@@ -5472,75 +5726,115 @@ msgctxt "name"
 msgid "Post Processing"
 msgstr "Nabewerking"
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "description"
-msgid "Provides a prepare stage in Cura."
-msgstr "Deze optie biedt een voorbereidingsstadium in Cura."
+msgid "Provides the link to the CuraEngine slicing backend."
+msgstr "Voorziet in de koppeling naar het slicing-back-end van de CuraEngine."
 
-#: PrepareStage/plugin.json
+#: CuraEngineBackend/plugin.json
 msgctxt "name"
-msgid "Prepare Stage"
-msgstr "Stadium voorbereiden"
+msgid "CuraEngine Backend"
+msgstr "CuraEngine-back-end"
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "description"
-msgid "Provides a preview stage in Cura."
-msgstr "Deze optie biedt een voorbeeldstadium in Cura."
+msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
+msgstr "Hiermee accepteert u G-code en verzendt u deze code naar een printer. Via de invoegtoepassing kan tevens de firmware worden bijgewerkt."
 
-#: PreviewStage/plugin.json
+#: USBPrinting/plugin.json
 msgctxt "name"
-msgid "Preview Stage"
-msgstr "Voorbeeldstadium"
+msgid "USB printing"
+msgstr "USB-printen"
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "description"
-msgid "Provides removable drive hotplugging and writing support."
-msgstr "Biedt hotplug- en schrijfondersteuning voor verwisselbare stations."
+msgid "Provides support for exporting Cura profiles."
+msgstr "Biedt ondersteuning voor het exporteren van Cura-profielen."
 
-#: RemovableDriveOutputDevice/plugin.json
+#: CuraProfileWriter/plugin.json
 msgctxt "name"
-msgid "Removable Drive Output Device Plugin"
-msgstr "Invoegtoepassing voor Verwijderbaar uitvoerapparaat"
+msgid "Cura Profile Writer"
+msgstr "Cura-profielschrijver"
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "description"
-msgid "Logs certain events so that they can be used by the crash reporter"
-msgstr "Hiermee worden bepaalde gebeurtenissen geregistreerd, zodat deze door de crashrapportage kunnen worden gebruikt"
+msgid "Manages network connections to Ultimaker networked printers."
+msgstr "Hiermee beheert u netwerkverbindingen naar Ultimaker-netwerkprinters."
 
-#: SentryLogger/plugin.json
+#: UM3NetworkPrinting/plugin.json
 msgctxt "name"
-msgid "Sentry Logger"
-msgstr "Sentrylogger"
+msgid "Ultimaker Network Connection"
+msgstr "Ultimaker-netwerkverbinding"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "description"
-msgid "Provides the Simulation view."
-msgstr "Hiermee geeft u de simulatieweergave weer."
+msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
+msgstr "Biedt machineacties voor Ultimaker-machines (zoals wizard voor bedkalibratie, selecteren van upgrades, enz.)"
 
-#: SimulationView/plugin.json
+#: UltimakerMachineActions/plugin.json
 msgctxt "name"
-msgid "Simulation View"
-msgstr "Simulatieweergave"
+msgid "Ultimaker machine actions"
+msgstr "Acties Ultimaker-machines"
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "description"
-msgid "Submits anonymous slice info. Can be disabled through preferences."
-msgstr "Verzendt anonieme slice-informatie. Dit kan bij de voorkeuren worden uitgeschakeld."
+msgid "Provides support for reading 3MF files."
+msgstr "Biedt ondersteuning voor het lezen van 3MF-bestanden."
 
-#: SliceInfoPlugin/plugin.json
+#: 3MFReader/plugin.json
 msgctxt "name"
-msgid "Slice info"
-msgstr "Slice-informatie"
+msgid "3MF Reader"
+msgstr "3MF-lezer"
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "description"
-msgid "Provides a normal solid mesh view."
-msgstr "Biedt een normale, solide rasterweergave."
+msgid "Writes g-code to a compressed archive."
+msgstr "Met deze optie schrijft u G-code naar een gecomprimeerd archief."
 
-#: SolidView/plugin.json
+#: GCodeGzWriter/plugin.json
 msgctxt "name"
-msgid "Solid View"
-msgstr "Solide weergave"
+msgid "Compressed G-code Writer"
+msgstr "Schrijver voor gecomprimeerde G-code"
+
+#: GCodeGzReader/plugin.json
+msgctxt "description"
+msgid "Reads g-code from a compressed archive."
+msgstr "Hiermee leest u G-code uit een gecomprimeerd archief."
+
+#: GCodeGzReader/plugin.json
+msgctxt "name"
+msgid "Compressed G-code Reader"
+msgstr "Lezer voor gecomprimeerde G-code"
+
+#: ModelChecker/plugin.json
+msgctxt "description"
+msgid "Checks models and print configuration for possible printing issues and give suggestions."
+msgstr "Via deze optie controleert u de modellen en de printconfiguratie op mogelijke printproblemen en ontvangt u suggesties."
+
+#: ModelChecker/plugin.json
+msgctxt "name"
+msgid "Model Checker"
+msgstr "Modelcontrole"
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "description"
+msgid "Checks for firmware updates."
+msgstr "Controleert op firmware-updates."
+
+#: FirmwareUpdateChecker/plugin.json
+msgctxt "name"
+msgid "Firmware Update Checker"
+msgstr "Firmware-updatecontrole"
+
+#: GCodeReader/plugin.json
+msgctxt "description"
+msgid "Allows loading and displaying G-code files."
+msgstr "Hiermee kunt u G-code-bestanden laden en weergeven."
+
+#: GCodeReader/plugin.json
+msgctxt "name"
+msgid "G-code Reader"
+msgstr "G-code-lezer"
 
 #: SupportEraser/plugin.json
 msgctxt "description"
@@ -5552,16 +5846,6 @@ msgctxt "name"
 msgid "Support Eraser"
 msgstr "Supportwisser"
 
-#: Toolbox/plugin.json
-msgctxt "description"
-msgid "Find, manage and install new Cura packages."
-msgstr "Nieuwe Cura-packages zoeken, beheren en installeren."
-
-#: Toolbox/plugin.json
-msgctxt "name"
-msgid "Toolbox"
-msgstr "Werkset"
-
 #: TrimeshReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading model files."
@@ -5572,6 +5856,16 @@ msgctxt "name"
 msgid "Trimesh Reader"
 msgstr "Trimesh-lezer"
 
+#: SentryLogger/plugin.json
+msgctxt "description"
+msgid "Logs certain events so that they can be used by the crash reporter"
+msgstr "Hiermee worden bepaalde gebeurtenissen geregistreerd, zodat deze door de crashrapportage kunnen worden gebruikt"
+
+#: SentryLogger/plugin.json
+msgctxt "name"
+msgid "Sentry Logger"
+msgstr "Sentrylogger"
+
 #: UFPReader/plugin.json
 msgctxt "description"
 msgid "Provides support for reading Ultimaker Format Packages."
@@ -5582,265 +5876,253 @@ msgctxt "name"
 msgid "UFP Reader"
 msgstr "UFP-lezer"
 
-#: UFPWriter/plugin.json
-msgctxt "description"
-msgid "Provides support for writing Ultimaker Format Packages."
-msgstr "Deze optie biedt ondersteuning voor het schrijven van Ultimaker Format Packages."
-
-#: UFPWriter/plugin.json
-msgctxt "name"
-msgid "UFP Writer"
-msgstr "UFP-schrijver"
-
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "description"
-msgid "Provides machine actions for Ultimaker machines (such as bed leveling wizard, selecting upgrades, etc.)."
-msgstr "Biedt machineacties voor Ultimaker-machines (zoals wizard voor bedkalibratie, selecteren van upgrades, enz.)"
+msgid "Provides support for importing profiles from legacy Cura versions."
+msgstr "Biedt ondersteuning voor het importeren van profielen uit oudere Cura-versies."
 
-#: UltimakerMachineActions/plugin.json
+#: LegacyProfileReader/plugin.json
 msgctxt "name"
-msgid "Ultimaker machine actions"
-msgstr "Acties Ultimaker-machines"
+msgid "Legacy Cura Profile Reader"
+msgstr "Lezer voor Profielen van oudere Cura-versies"
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "description"
-msgid "Manages network connections to Ultimaker networked printers."
-msgstr "Hiermee beheert u netwerkverbindingen naar Ultimaker-netwerkprinters."
+msgid "Provides a prepare stage in Cura."
+msgstr "Deze optie biedt een voorbereidingsstadium in Cura."
 
-#: UM3NetworkPrinting/plugin.json
+#: PrepareStage/plugin.json
 msgctxt "name"
-msgid "Ultimaker Network Connection"
-msgstr "Ultimaker-netwerkverbinding"
+msgid "Prepare Stage"
+msgstr "Stadium voorbereiden"
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "description"
-msgid "Accepts G-Code and sends them to a printer. Plugin can also update firmware."
-msgstr "Hiermee accepteert u G-code en verzendt u deze code naar een printer. Via de invoegtoepassing kan tevens de firmware worden bijgewerkt."
+msgid "Provides a monitor stage in Cura."
+msgstr "Deze optie biedt een controlestadium in Cura."
 
-#: USBPrinting/plugin.json
+#: MonitorStage/plugin.json
 msgctxt "name"
-msgid "USB printing"
-msgstr "USB-printen"
+msgid "Monitor Stage"
+msgstr "Controlestadium"
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.1 to Cura 2.2."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.1 naar Cura 2.2."
+msgid "Provides the X-Ray view."
+msgstr "Biedt de röntgenweergave."
 
-#: VersionUpgrade/VersionUpgrade21to22/plugin.json
+#: XRayView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.1 to 2.2"
-msgstr "Versie-upgrade van 2.1 naar 2.2"
+msgid "X-Ray View"
+msgstr "Röntgenweergave"
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.2 to Cura 2.4."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.2 naar Cura 2.4."
+msgid "Provides support for writing 3MF files."
+msgstr "Biedt ondersteuning voor het schrijven van 3MF-bestanden."
 
-#: VersionUpgrade/VersionUpgrade22to24/plugin.json
+#: 3MFWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.2 to 2.4"
-msgstr "Versie-upgrade van 2.2 naar 2.4"
+msgid "3MF Writer"
+msgstr "3MF-schrijver"
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.5 to Cura 2.6."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.5 naar Cura 2.6."
+msgid "Submits anonymous slice info. Can be disabled through preferences."
+msgstr "Verzendt anonieme slice-informatie. Dit kan bij de voorkeuren worden uitgeschakeld."
 
-#: VersionUpgrade/VersionUpgrade25to26/plugin.json
+#: SliceInfoPlugin/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.5 to 2.6"
-msgstr "Versie-upgrade van 2.5 naar 2.6"
+msgid "Slice info"
+msgstr "Slice-informatie"
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.6 to Cura 2.7."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.6 naar Cura 2.7."
+msgid "Provides a preview stage in Cura."
+msgstr "Deze optie biedt een voorbeeldstadium in Cura."
 
-#: VersionUpgrade/VersionUpgrade26to27/plugin.json
+#: PreviewStage/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.6 to 2.7"
-msgstr "Versie-upgrade van 2.6 naar 2.7"
+msgid "Preview Stage"
+msgstr "Voorbeeldstadium"
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 2.7 to Cura 3.0."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 2.7 naar Cura 3.0."
+msgid "Provides the Simulation view."
+msgstr "Hiermee geeft u de simulatieweergave weer."
 
-#: VersionUpgrade/VersionUpgrade27to30/plugin.json
+#: SimulationView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 2.7 to 3.0"
-msgstr "Versie-upgrade van 2.7 naar 3.0"
+msgid "Simulation View"
+msgstr "Simulatieweergave"
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.0 to Cura 3.1."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.0 naar Cura 3.1."
+msgid "Provides a way to change machine settings (such as build volume, nozzle size, etc.)."
+msgstr "Biedt een manier om de machine-instellingen (zoals bouwvolume, maat nozzle, enz.) te wijzigen."
 
-#: VersionUpgrade/VersionUpgrade30to31/plugin.json
+#: MachineSettingsAction/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.0 to 3.1"
-msgstr "Versie-upgrade van 3.0 naar 3.1"
+msgid "Machine Settings Action"
+msgstr "Actie machine-instellingen"
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.2 to Cura 3.3."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.2 naar Cura 3.3."
+msgid "Provides capabilities to read and write XML-based material profiles."
+msgstr "Biedt mogelijkheden om materiaalprofielen op XML-basis te lezen en te schrijven."
 
-#: VersionUpgrade/VersionUpgrade32to33/plugin.json
+#: XmlMaterialProfile/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.2 to 3.3"
-msgstr "Versie-upgrade van 3.2 naar 3.3"
+msgid "Material Profiles"
+msgstr "Materiaalprofielen"
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.3 to Cura 3.4."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.3 naar Cura 3.4."
+msgid "Provides a normal solid mesh view."
+msgstr "Biedt een normale, solide rasterweergave."
 
-#: VersionUpgrade/VersionUpgrade33to34/plugin.json
+#: SolidView/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.3 to 3.4"
-msgstr "Versie-upgrade van 3.3 naar 3.4"
+msgid "Solid View"
+msgstr "Solide weergave"
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.4 to Cura 3.5."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.4 naar Cura 3.5."
+msgid "Provides support for importing Cura profiles."
+msgstr "Biedt ondersteuning bij het importeren van Cura-profielen."
 
-#: VersionUpgrade/VersionUpgrade34to35/plugin.json
+#: CuraProfileReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.4 to 3.5"
-msgstr "Versie-upgrade van 3.4 naar 3.5"
+msgid "Cura Profile Reader"
+msgstr "Cura-profiellezer"
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 3.5 to Cura 4.0."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 3.5 naar Cura 4.0."
+msgid "Provides support for writing Ultimaker Format Packages."
+msgstr "Deze optie biedt ondersteuning voor het schrijven van Ultimaker Format Packages."
 
-#: VersionUpgrade/VersionUpgrade35to40/plugin.json
+#: UFPWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 3.5 to 4.0"
-msgstr "Versie-upgrade van 3.5 naar 4.0"
+msgid "UFP Writer"
+msgstr "UFP-schrijver"
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.0 to Cura 4.1."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.0 naar Cura 4.1."
+msgid "Writes g-code to a file."
+msgstr "Met deze optie schrijft u G-code naar een bestand."
 
-#: VersionUpgrade/VersionUpgrade40to41/plugin.json
+#: GCodeWriter/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.0 to 4.1"
-msgstr "Versie-upgrade van 4.0 naar 4.1"
+msgid "G-code Writer"
+msgstr "G-code-schrijver"
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.1 to Cura 4.2."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.1 naar Cura 4.2."
+msgid "Enables ability to generate printable geometry from 2D image files."
+msgstr "Hiermee wordt het genereren van printbare geometrie van 2D-afbeeldingsbestanden mogelijk."
 
-#: VersionUpgrade/VersionUpgrade41to42/plugin.json
+#: ImageReader/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.1 to 4.2"
-msgstr "Versie-upgrade van 4.1 naar 4.2"
+msgid "Image Reader"
+msgstr "Afbeeldinglezer"
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "description"
-msgid "Upgrades configurations from Cura 4.2 to Cura 4.3."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.2 naar Cura 4.3."
+msgid "Backup and restore your configuration."
+msgstr "Een back-up maken van uw configuratie en deze herstellen."
 
-#: VersionUpgrade/VersionUpgrade42to43/plugin.json
+#: CuraDrive/plugin.json
 msgctxt "name"
-msgid "Version Upgrade 4.2 to 4.3"
-msgstr "Versie-upgrade van 4.2 naar 4.3"
+msgid "Cura Backups"
+msgstr "Cura-back-ups"
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.3 to Cura 4.4."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.3 naar Cura 4.4."
+#~ msgctxt "@info:status"
+#~ msgid "Global stack is missing."
+#~ msgstr "Algemene stapel ontbreekt."
 
-#: VersionUpgrade/VersionUpgrade43to44/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.3 to 4.4"
-msgstr "Versie-upgrade van 4.3 naar 4.4"
+#~ msgctxt "@info:status"
+#~ msgid "Your model is not manifold. The highlighted areas indicate either missing or extraneous surfaces."
+#~ msgstr "Uw model is niet veelvoudig. De gemarkeerde gebieden geven ofwel ontbrekende of ongebruikelijke oppervlakken aan."
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.4 to Cura 4.5."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.4 naar Cura 4.5."
+#~ msgctxt "@info:title"
+#~ msgid "Model errors"
+#~ msgstr "Modelfouten"
 
-#: VersionUpgrade/VersionUpgrade44to45/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.4 to 4.5"
-msgstr "Versie-upgrade van 4.4 naar 4.5"
+#~ msgctxt "@label:listbox"
+#~ msgid "Layer thickness"
+#~ msgstr "Laagdikte"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.5 to Cura 4.6."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.5 naar Cura 4.6."
+#~ msgctxt "@label"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Uw sleutel tot verbonden 3D-printen"
 
-#: VersionUpgrade/VersionUpgrade45to46/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.5 to 4.6"
-msgstr "Versie-upgrade van 4.5 naar 4.6"
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "- Customize your experience with more print profiles and plugins\n"
+#~ "- Stay flexible by syncing your setup and loading it anywhere\n"
+#~ "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr ""
+#~ "- Pas uw ervaring aan met meer printprofielen en plug-ins\n"
+#~ "- Blijf flexibel door uw instellingen te synchroniseren en overal te laden\n"
+#~ "- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.0 to Cura 4.6.2."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.0 naar Cura 4.6.2."
+#~ msgctxt "@button"
+#~ msgid "Create account"
+#~ msgstr "Account maken"
 
-#: VersionUpgrade/VersionUpgrade460to462/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.0 to 4.6.2"
-msgstr "Versie-upgrade van 4.6.0 naar 4.6.2"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Delete Selected Model"
+#~ msgid_plural "Delete Selected Models"
+#~ msgstr[0] "Geselecteerd model verwijderen"
+#~ msgstr[1] "Geselecteerde modellen verwijderen"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.6.2 to Cura 4.7."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.6.2 naar Cura 4.7."
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Center Selected Model"
+#~ msgid_plural "Center Selected Models"
+#~ msgstr[0] "Geselecteerd model centreren"
+#~ msgstr[1] "Geselecteerde modellen centreren"
 
-#: VersionUpgrade/VersionUpgrade462to47/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.6.2 to 4.7"
-msgstr "Versie-upgrade van 4.6.2 naar 4.7"
+#~ msgctxt "@action:inmenu menubar:edit"
+#~ msgid "Multiply Selected Model"
+#~ msgid_plural "Multiply Selected Models"
+#~ msgstr[0] "Geselecteerd model verveelvoudigen"
+#~ msgstr[1] "Geselecteerde modellen verveelvoudigen"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "description"
-msgid "Upgrades configurations from Cura 4.7 to Cura 4.8."
-msgstr "Hiermee worden configuraties bijgewerkt van Cura 4.7 naar Cura 4.8."
+#~ msgctxt "@button"
+#~ msgid "Finish"
+#~ msgstr "Voltooien"
 
-#: VersionUpgrade/VersionUpgrade47to48/plugin.json
-msgctxt "name"
-msgid "Version Upgrade 4.7 to 4.8"
-msgstr "Versie-upgrade van 4.7 naar 4.8"
+#~ msgctxt "@label"
+#~ msgid "Ultimaker Account"
+#~ msgstr "Ultimaker-account"
 
-#: X3DReader/plugin.json
-msgctxt "description"
-msgid "Provides support for reading X3D files."
-msgstr "Deze optie biedt ondersteuning voor het lezen van X3D-bestanden."
+#~ msgctxt "@text"
+#~ msgid "Your key to connected 3D printing"
+#~ msgstr "Uw sleutel tot verbonden 3D-printen"
 
-#: X3DReader/plugin.json
-msgctxt "name"
-msgid "X3D Reader"
-msgstr "X3D-lezer"
+#~ msgctxt "@text"
+#~ msgid "- Customize your experience with more print profiles and plugins"
+#~ msgstr "- Pas uw ervaring aan met meer printprofielen en plug-ins"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "description"
-msgid "Provides capabilities to read and write XML-based material profiles."
-msgstr "Biedt mogelijkheden om materiaalprofielen op XML-basis te lezen en te schrijven."
+#~ msgctxt "@text"
+#~ msgid "- Stay flexible by syncing your setup and loading it anywhere"
+#~ msgstr "- Blijf flexibel door uw instellingen te synchroniseren en overal te laden"
 
-#: XmlMaterialProfile/plugin.json
-msgctxt "name"
-msgid "Material Profiles"
-msgstr "Materiaalprofielen"
+#~ msgctxt "@text"
+#~ msgid "- Increase efficiency with a remote workflow on Ultimaker printers"
+#~ msgstr "- Verhoog de efficiëntie met een externe workflow op Ultimaker-printers"
 
-#: XRayView/plugin.json
-msgctxt "description"
-msgid "Provides the X-Ray view."
-msgstr "Biedt de röntgenweergave."
+#~ msgctxt "@text"
+#~ msgid ""
+#~ "Please follow these steps to set up\n"
+#~ "Ultimaker Cura. This will only take a few moments."
+#~ msgstr ""
+#~ "Volg deze stappen voor het instellen van\n"
+#~ "Ultimaker Cura. Dit duurt slechts even."
 
-#: XRayView/plugin.json
-msgctxt "name"
-msgid "X-Ray View"
-msgstr "Röntgenweergave"
+#~ msgctxt "@label"
+#~ msgid "What's new in Ultimaker Cura"
+#~ msgstr "Nieuwe functies in Ultimaker Cura"
 
 #~ msgctxt "@label ({} is object name)"
 #~ msgid "Are you sure you wish to remove {}? This cannot be undone!"
diff --git a/resources/i18n/nl_NL/fdmextruder.def.json.po b/resources/i18n/nl_NL/fdmextruder.def.json.po
index 61b993cdb3..18b2db0268 100644
--- a/resources/i18n/nl_NL/fdmextruder.def.json.po
+++ b/resources/i18n/nl_NL/fdmextruder.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2019-03-13 14:00+0200\n"
 "Last-Translator: Bothof <info@bothof.nl>\n"
 "Language-Team: Dutch\n"
diff --git a/resources/i18n/nl_NL/fdmprinter.def.json.po b/resources/i18n/nl_NL/fdmprinter.def.json.po
index 90db586658..cbfef07304 100644
--- a/resources/i18n/nl_NL/fdmprinter.def.json.po
+++ b/resources/i18n/nl_NL/fdmprinter.def.json.po
@@ -1,12 +1,12 @@
 # Cura
-# Copyright (C) 2020 Ultimaker B.V.
+# Copyright (C) 2021 Ultimaker B.V.
 # This file is distributed under the same license as the Cura package.
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: Cura 4.8\n"
+"Project-Id-Version: Cura 4.9\n"
 "Report-Msgid-Bugs-To: r.dulek@ultimaker.com\n"
-"POT-Creation-Date: 2020-10-19 13:15+0000\n"
+"POT-Creation-Date: 2021-04-02 16:09+0000\n"
 "PO-Revision-Date: 2020-08-21 13:40+0200\n"
 "Last-Translator: Lionbridge <info@lionbridge.com>\n"
 "Language-Team: Dutch <info@lionbridge.com>, Dutch <info@bothof.nl>\n"
@@ -420,6 +420,26 @@ msgid "Whether the extruders share a single heater rather than each extruder hav
 msgstr "Hiermee bepaalt u of de extruders één verwarming delen in plaats van dat elke extruder zijn eigen verwarming heeft."
 
 #: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle label"
+msgid "Extruders Share Nozzle"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_share_nozzle description"
+msgid "Whether the extruders share a single nozzle rather than each extruder having its own nozzle. When set to true, it is expected that the printer-start gcode script properly sets up all extruders in an initial retraction state that is known and mutually compatible (either zero or one filament not retracted); in that case the initial retraction status is described, per extruder, by the 'machine_extruders_shared_nozzle_initial_retraction' parameter."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction label"
+msgid "Shared Nozzle Initial Retraction"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "machine_extruders_shared_nozzle_initial_retraction description"
+msgid "How much the filament of each extruder is assumed to have been retracted from the shared nozzle tip at the completion of the printer-start gcode script; the value should be equal to or greater than the length of the common part of the nozzle's ducts."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "machine_disallowed_areas label"
 msgid "Disallowed Areas"
 msgstr "Verboden gebieden"
@@ -486,8 +506,8 @@ msgstr "Offset met extruder"
 
 #: fdmprinter.def.json
 msgctxt "machine_use_extruder_offset_to_offset_coords description"
-msgid "Apply the extruder offset to the coordinate system."
-msgstr "Pas de extruderoffset toe op het coördinatensysteem."
+msgid "Apply the extruder offset to the coordinate system. Affects all extruders."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "extruder_prime_pos_z label"
@@ -881,8 +901,8 @@ msgstr "Vermenigvuldiging van de lijnbreedte van de eerste laag. Door deze te ve
 
 #: fdmprinter.def.json
 msgctxt "shell label"
-msgid "Shell"
-msgstr "Shell"
+msgid "Walls"
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "shell description"
@@ -950,166 +970,6 @@ msgid "Distance of a travel move inserted after the outer wall, to hide the Z se
 msgstr "Afstand van een beweging die ingevoegd is na de buitenwand, om de Z-naad beter te maskeren."
 
 #: fdmprinter.def.json
-msgctxt "roofing_extruder_nr label"
-msgid "Top Surface Skin Extruder"
-msgstr "Extruder bovenskin"
-
-#: fdmprinter.def.json
-msgctxt "roofing_extruder_nr description"
-msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
-msgstr "De extruder train die voor het printen van de bovenste skinlaag wordt gebruikt. Deze wordt gebruikt in meervoudige doorvoer."
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count label"
-msgid "Top Surface Skin Layers"
-msgstr "Bovenste skinlagen"
-
-#: fdmprinter.def.json
-msgctxt "roofing_layer_count description"
-msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
-msgstr "Het aantal bovenste skinlagen. Doorgaans is één bovenste skinlaag voldoende om oppervlakken van hogere kwaliteit te verkrijgen."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr label"
-msgid "Top/Bottom Extruder"
-msgstr "Extruder Boven-/Onderkant"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_extruder_nr description"
-msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
-msgstr "De extruder train die voor het printen van de boven- en onderskin wordt gebruikt. Deze wordt gebruikt in meervoudige doorvoer."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness label"
-msgid "Top/Bottom Thickness"
-msgstr "Dikte Boven-/Onderkant"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_thickness description"
-msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
-msgstr "De dikte van de boven-/onderlagen in de print. Het aantal boven-/onderlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
-
-#: fdmprinter.def.json
-msgctxt "top_thickness label"
-msgid "Top Thickness"
-msgstr "Dikte Bovenkant"
-
-#: fdmprinter.def.json
-msgctxt "top_thickness description"
-msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
-msgstr "De dikte van de bovenlagen in de print. Het aantal bovenlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
-
-#: fdmprinter.def.json
-msgctxt "top_layers label"
-msgid "Top Layers"
-msgstr "Bovenlagen"
-
-#: fdmprinter.def.json
-msgctxt "top_layers description"
-msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
-msgstr "Het aantal bovenlagen. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bovenkant, wordt deze afgerond naar een geheel getal."
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness label"
-msgid "Bottom Thickness"
-msgstr "Bodemdikte"
-
-#: fdmprinter.def.json
-msgctxt "bottom_thickness description"
-msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
-msgstr "De dikte van de onderlagen in de print. Het aantal onderlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers label"
-msgid "Bottom Layers"
-msgstr "Bodemlagen"
-
-#: fdmprinter.def.json
-msgctxt "bottom_layers description"
-msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Het aantal bodemlagen. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bodem, wordt deze afgerond naar een geheel getal."
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers label"
-msgid "Initial Bottom Layers"
-msgstr "Eerste onderste lagen"
-
-#: fdmprinter.def.json
-msgctxt "initial_bottom_layers description"
-msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
-msgstr "Het aantal initiële onderste lagen, vanaf de bouwplaat naar boven. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bodem, wordt deze afgerond naar een geheel getal."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern label"
-msgid "Top/Bottom Pattern"
-msgstr "Patroon Boven-/Onderkant"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern description"
-msgid "The pattern of the top/bottom layers."
-msgstr "Het patroon van de boven-/onderlagen."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option lines"
-msgid "Lines"
-msgstr "Lijnen"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option concentric"
-msgid "Concentric"
-msgstr "Concentrisch"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern option zigzag"
-msgid "Zig Zag"
-msgstr "Zigzag"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 label"
-msgid "Bottom Pattern Initial Layer"
-msgstr "Eerste laag patroon onderkant"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 description"
-msgid "The pattern on the bottom of the print on the first layer."
-msgstr "Het patroon van de eerste laag aan de onderkant van de print."
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option lines"
-msgid "Lines"
-msgstr "Lijnen"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option concentric"
-msgid "Concentric"
-msgstr "Concentrisch"
-
-#: fdmprinter.def.json
-msgctxt "top_bottom_pattern_0 option zigzag"
-msgid "Zig Zag"
-msgstr "Zigzag"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons label"
-msgid "Connect Top/Bottom Polygons"
-msgstr "Boven-/onderkant Polygonen Verbinden"
-
-#: fdmprinter.def.json
-msgctxt "connect_skin_polygons description"
-msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
-msgstr "Verbind skinpaden aan de boven-/onderkant waar ze naast elkaar lopen. Met deze instelling wordt bij concentrische patronen de bewegingstijd aanzienlijk verkort. Dit kan echter ten koste gaan van de kwaliteit van de bovenste laag aangezien de verbindingen in het midden van de vulling kunnen komen te liggen."
-
-#: fdmprinter.def.json
-msgctxt "skin_angles label"
-msgid "Top/Bottom Line Directions"
-msgstr "Lijnrichtingen boven-/onderkant"
-
-#: fdmprinter.def.json
-msgctxt "skin_angles description"
-msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
-msgstr "Een lijst met gehele getallen voor lijnrichtingen die moet worden gebruikt wanneer voor de boven-/onderlagen een lijn- of zigzagpatroon wordt gebruikt. Elementen uit de lijst worden tijdens het printen van de lagen opeenvolgend gebruikt. Wanneer het einde van de lijst bereikt is, wordt deze weer van voren af aan gestart. De lijstitems zijn gescheiden door komma's en de hele lijst is binnen vierkante haken geplaatst. Standaard wordt een lege lijst gebruikt, wat inhoudt dat de traditionele standaardhoeken (45 en 135 graden) worden gebruikt."
-
-#: fdmprinter.def.json
 msgctxt "wall_0_inset label"
 msgid "Outer Wall Inset"
 msgstr "Uitsparing Buitenwand"
@@ -1415,6 +1275,176 @@ msgid "When enabled, the z seam coordinates are relative to each part's centre.
 msgstr "Als deze optie ingeschakeld is, zijn de Z-naadcoördinaten relatief ten opzichte van het midden van elk deel. Als de optie uitgeschakeld is, staan de coördinaten voor een absolute positie op het platform."
 
 #: fdmprinter.def.json
+msgctxt "top_bottom label"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "top_bottom description"
+msgid "Top/Bottom"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr label"
+msgid "Top Surface Skin Extruder"
+msgstr "Extruder bovenskin"
+
+#: fdmprinter.def.json
+msgctxt "roofing_extruder_nr description"
+msgid "The extruder train used for printing the top most skin. This is used in multi-extrusion."
+msgstr "De extruder train die voor het printen van de bovenste skinlaag wordt gebruikt. Deze wordt gebruikt in meervoudige doorvoer."
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count label"
+msgid "Top Surface Skin Layers"
+msgstr "Bovenste skinlagen"
+
+#: fdmprinter.def.json
+msgctxt "roofing_layer_count description"
+msgid "The number of top most skin layers. Usually only one top most layer is sufficient to generate higher quality top surfaces."
+msgstr "Het aantal bovenste skinlagen. Doorgaans is één bovenste skinlaag voldoende om oppervlakken van hogere kwaliteit te verkrijgen."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr label"
+msgid "Top/Bottom Extruder"
+msgstr "Extruder Boven-/Onderkant"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_extruder_nr description"
+msgid "The extruder train used for printing the top and bottom skin. This is used in multi-extrusion."
+msgstr "De extruder train die voor het printen van de boven- en onderskin wordt gebruikt. Deze wordt gebruikt in meervoudige doorvoer."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness label"
+msgid "Top/Bottom Thickness"
+msgstr "Dikte Boven-/Onderkant"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_thickness description"
+msgid "The thickness of the top/bottom layers in the print. This value divided by the layer height defines the number of top/bottom layers."
+msgstr "De dikte van de boven-/onderlagen in de print. Het aantal boven-/onderlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
+
+#: fdmprinter.def.json
+msgctxt "top_thickness label"
+msgid "Top Thickness"
+msgstr "Dikte Bovenkant"
+
+#: fdmprinter.def.json
+msgctxt "top_thickness description"
+msgid "The thickness of the top layers in the print. This value divided by the layer height defines the number of top layers."
+msgstr "De dikte van de bovenlagen in de print. Het aantal bovenlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
+
+#: fdmprinter.def.json
+msgctxt "top_layers label"
+msgid "Top Layers"
+msgstr "Bovenlagen"
+
+#: fdmprinter.def.json
+msgctxt "top_layers description"
+msgid "The number of top layers. When calculated by the top thickness, this value is rounded to a whole number."
+msgstr "Het aantal bovenlagen. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bovenkant, wordt deze afgerond naar een geheel getal."
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness label"
+msgid "Bottom Thickness"
+msgstr "Bodemdikte"
+
+#: fdmprinter.def.json
+msgctxt "bottom_thickness description"
+msgid "The thickness of the bottom layers in the print. This value divided by the layer height defines the number of bottom layers."
+msgstr "De dikte van de onderlagen in de print. Het aantal onderlagen wordt bepaald door het delen van deze waarde door de laaghoogte."
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers label"
+msgid "Bottom Layers"
+msgstr "Bodemlagen"
+
+#: fdmprinter.def.json
+msgctxt "bottom_layers description"
+msgid "The number of bottom layers. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Het aantal bodemlagen. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bodem, wordt deze afgerond naar een geheel getal."
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers label"
+msgid "Initial Bottom Layers"
+msgstr "Eerste onderste lagen"
+
+#: fdmprinter.def.json
+msgctxt "initial_bottom_layers description"
+msgid "The number of initial bottom layers, from the build-plate upwards. When calculated by the bottom thickness, this value is rounded to a whole number."
+msgstr "Het aantal initiële onderste lagen, vanaf de bouwplaat naar boven. Wanneer deze waarde wordt berekend aan de hand van de dikte van de bodem, wordt deze afgerond naar een geheel getal."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern label"
+msgid "Top/Bottom Pattern"
+msgstr "Patroon Boven-/Onderkant"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern description"
+msgid "The pattern of the top/bottom layers."
+msgstr "Het patroon van de boven-/onderlagen."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option lines"
+msgid "Lines"
+msgstr "Lijnen"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option concentric"
+msgid "Concentric"
+msgstr "Concentrisch"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern option zigzag"
+msgid "Zig Zag"
+msgstr "Zigzag"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 label"
+msgid "Bottom Pattern Initial Layer"
+msgstr "Eerste laag patroon onderkant"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 description"
+msgid "The pattern on the bottom of the print on the first layer."
+msgstr "Het patroon van de eerste laag aan de onderkant van de print."
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option lines"
+msgid "Lines"
+msgstr "Lijnen"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option concentric"
+msgid "Concentric"
+msgstr "Concentrisch"
+
+#: fdmprinter.def.json
+msgctxt "top_bottom_pattern_0 option zigzag"
+msgid "Zig Zag"
+msgstr "Zigzag"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons label"
+msgid "Connect Top/Bottom Polygons"
+msgstr "Boven-/onderkant Polygonen Verbinden"
+
+#: fdmprinter.def.json
+msgctxt "connect_skin_polygons description"
+msgid "Connect top/bottom skin paths where they run next to each other. For the concentric pattern enabling this setting greatly reduces the travel time, but because the connections can happen midway over infill this feature can reduce the top surface quality."
+msgstr "Verbind skinpaden aan de boven-/onderkant waar ze naast elkaar lopen. Met deze instelling wordt bij concentrische patronen de bewegingstijd aanzienlijk verkort. Dit kan echter ten koste gaan van de kwaliteit van de bovenste laag aangezien de verbindingen in het midden van de vulling kunnen komen te liggen."
+
+#: fdmprinter.def.json
+msgctxt "skin_angles label"
+msgid "Top/Bottom Line Directions"
+msgstr "Lijnrichtingen boven-/onderkant"
+
+#: fdmprinter.def.json
+msgctxt "skin_angles description"
+msgid "A list of integer line directions to use when the top/bottom layers use the lines or zig zag pattern. Elements from the list are used sequentially as the layers progress and when the end of the list is reached, it starts at the beginning again. The list items are separated by commas and the whole list is contained in square brackets. Default is an empty list which means use the traditional default angles (45 and 135 degrees)."
+msgstr "Een lijst met gehele getallen voor lijnrichtingen die moet worden gebruikt wanneer voor de boven-/onderlagen een lijn- of zigzagpatroon wordt gebruikt. Elementen uit de lijst worden tijdens het printen van de lagen opeenvolgend gebruikt. Wanneer het einde van de lijst bereikt is, wordt deze weer van voren af aan gestart. De lijstitems zijn gescheiden door komma's en de hele lijst is binnen vierkante haken geplaatst. Standaard wordt een lege lijst gebruikt, wat inhoudt dat de traditionele standaardhoeken (45 en 135 graden) worden gebruikt."
+
+#: fdmprinter.def.json
 msgctxt "skin_no_small_gaps_heuristic label"
 msgid "No Skin in Z Gaps"
 msgstr "Geen skin in Z-gaten"
@@ -1555,6 +1585,86 @@ msgid "Adjust the amount of overlap between the walls and (the endpoints of) the
 msgstr "Pas de mate van overlap tussen de wanden en (de eindpunten van) de skin-middellijnen aan. Met een lichte overlap kunnen de wanden goed hechten aan de skin. Houd er rekening mee dat met een gelijke lijnbreedte voor skin en wand, skin buiten de wand kan treden bij een waarde groter dan de halve wandbreedte, omdat de nozzle van de skin-extruder op deze positie het midden van de wand al kan hebben bereikt."
 
 #: fdmprinter.def.json
+msgctxt "skin_preshrink label"
+msgid "Skin Removal Width"
+msgstr "Verwijderingsbreedte skin"
+
+#: fdmprinter.def.json
+msgctxt "skin_preshrink description"
+msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
+msgstr "De grootste breedte van skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de bovenste/onderste skinlaag op schuine vlakken in het model."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink label"
+msgid "Top Skin Removal Width"
+msgstr "Verwijderingsbreedte bovenste skinlaag"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_preshrink description"
+msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
+msgstr "De grootste breedte van delen van bovenste skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde, zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de bovenste/onderste skinlaag op schuine vlakken in het model."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink label"
+msgid "Bottom Skin Removal Width"
+msgstr "Verwijderingsbreedte onderste skinlaag"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_preshrink description"
+msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
+msgstr "De grootste breedte van delen van de onderste skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde, zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de onderste skinlaag op schuine vlakken in het model."
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance label"
+msgid "Skin Expand Distance"
+msgstr "Uitbreidingsafstand van skin"
+
+#: fdmprinter.def.json
+msgctxt "expand_skins_expand_distance description"
+msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
+msgstr "De afstand waarmee de skin wordt uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en hechten de wanden van aangrenzende lagen beter aan de skin. Bij lagere waarden wordt er minder materiaal gebruikt."
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance label"
+msgid "Top Skin Expand Distance"
+msgstr "Uitbreidingsafstand van bovenste skinlaag"
+
+#: fdmprinter.def.json
+msgctxt "top_skin_expand_distance description"
+msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
+msgstr "De afstand waarmee de bovenste skinlagen worden uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en hechten de wanden op de bovenliggende laag beter aan de skin. Bij lagere waarden wordt er minder materiaal gebruikt."
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance label"
+msgid "Bottom Skin Expand Distance"
+msgstr "Uitbreidingsafstand van onderste skinlaag"
+
+#: fdmprinter.def.json
+msgctxt "bottom_skin_expand_distance description"
+msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
+msgstr "De afstand waarmee de onderste skinlagen worden uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en de wanden van de onderliggende laag. Bij lagere waarden wordt er minder materiaal gebruikt."
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion label"
+msgid "Maximum Skin Angle for Expansion"
+msgstr "Maximale skinhoek voor uitbreiding"
+
+#: fdmprinter.def.json
+msgctxt "max_skin_angle_for_expansion description"
+msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal and will cause no skin to be expanded, while an angle of 90° is vertical and will cause all skin to be expanded."
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion label"
+msgid "Minimum Skin Width for Expansion"
+msgstr "Minimale skinbreedte voor uitbreiding"
+
+#: fdmprinter.def.json
+msgctxt "min_skin_width_for_expansion description"
+msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
+msgstr "Skingebieden die smaller zijn dan deze waarde, worden niet uitgebreid. Dit voorkomt het uitbreiden van smalle skingebieden die worden gemaakt wanneer het modeloppervlak een nagenoeg verticale helling heeft."
+
+#: fdmprinter.def.json
 msgctxt "infill label"
 msgid "Infill"
 msgstr "Vulling"
@@ -1864,86 +1974,6 @@ msgid "The minimum angle of internal overhangs for which infill is added. At a v
 msgstr "De minimale interne overhanghoek waarbij vulling wordt toegevoegd. Bij een waarde van 0° worden objecten volledig gevuld. Bij 90° wordt er geen vulling geprint."
 
 #: fdmprinter.def.json
-msgctxt "skin_preshrink label"
-msgid "Skin Removal Width"
-msgstr "Verwijderingsbreedte skin"
-
-#: fdmprinter.def.json
-msgctxt "skin_preshrink description"
-msgid "The largest width of skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top/bottom skin at slanted surfaces in the model."
-msgstr "De grootste breedte van skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de bovenste/onderste skinlaag op schuine vlakken in het model."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink label"
-msgid "Top Skin Removal Width"
-msgstr "Verwijderingsbreedte bovenste skinlaag"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_preshrink description"
-msgid "The largest width of top skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing top skin at slanted surfaces in the model."
-msgstr "De grootste breedte van delen van bovenste skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde, zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de bovenste/onderste skinlaag op schuine vlakken in het model."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink label"
-msgid "Bottom Skin Removal Width"
-msgstr "Verwijderingsbreedte onderste skinlaag"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_preshrink description"
-msgid "The largest width of bottom skin areas which are to be removed. Every skin area smaller than this value will disappear. This can help in limiting the amount of time and material spent on printing bottom skin at slanted surfaces in the model."
-msgstr "De grootste breedte van delen van de onderste skingebieden die verwijderd moeten worden. Elk skingebied dat smaller is dan deze waarde, zal verdwijnen. Hiermee kan op tijd en materiaal worden bespaard bij het printen van de onderste skinlaag op schuine vlakken in het model."
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance label"
-msgid "Skin Expand Distance"
-msgstr "Uitbreidingsafstand van skin"
-
-#: fdmprinter.def.json
-msgctxt "expand_skins_expand_distance description"
-msgid "The distance the skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on neighboring layers adhere better to the skin. Lower values save amount of material used."
-msgstr "De afstand waarmee de skin wordt uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en hechten de wanden van aangrenzende lagen beter aan de skin. Bij lagere waarden wordt er minder materiaal gebruikt."
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance label"
-msgid "Top Skin Expand Distance"
-msgstr "Uitbreidingsafstand van bovenste skinlaag"
-
-#: fdmprinter.def.json
-msgctxt "top_skin_expand_distance description"
-msgid "The distance the top skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the walls on the layer above adhere better to the skin. Lower values save amount of material used."
-msgstr "De afstand waarmee de bovenste skinlagen worden uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en hechten de wanden op de bovenliggende laag beter aan de skin. Bij lagere waarden wordt er minder materiaal gebruikt."
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance label"
-msgid "Bottom Skin Expand Distance"
-msgstr "Uitbreidingsafstand van onderste skinlaag"
-
-#: fdmprinter.def.json
-msgctxt "bottom_skin_expand_distance description"
-msgid "The distance the bottom skins are expanded into the infill. Higher values makes the skin attach better to the infill pattern and makes the skin adhere better to the walls on the layer below. Lower values save amount of material used."
-msgstr "De afstand waarmee de onderste skinlagen worden uitgebreid in de vulling. Bij hogere waarden hecht de skin beter aan het vulpatroon en de wanden van de onderliggende laag. Bij lagere waarden wordt er minder materiaal gebruikt."
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion label"
-msgid "Maximum Skin Angle for Expansion"
-msgstr "Maximale skinhoek voor uitbreiding"
-
-#: fdmprinter.def.json
-msgctxt "max_skin_angle_for_expansion description"
-msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
-msgstr "Van boven- en/of onderoppervlakken van het object met een hoek die groter is dan deze instelling, wordt de boven-/onderksin niet uitgebreid. Hiermee wordt de uitbreiding voorkomen van smalle skingebieden die worden gemaakt wanneer het modeloppervlak een nagenoeg verticale helling heeft. Een hoek van 0° is horizontaal en een hoek van 90° is verticaal."
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion label"
-msgid "Minimum Skin Width for Expansion"
-msgstr "Minimale skinbreedte voor uitbreiding"
-
-#: fdmprinter.def.json
-msgctxt "min_skin_width_for_expansion description"
-msgid "Skin areas narrower than this are not expanded. This avoids expanding the narrow skin areas that are created when the model surface has a slope close to the vertical."
-msgstr "Skingebieden die smaller zijn dan deze waarde, worden niet uitgebreid. Dit voorkomt het uitbreiden van smalle skingebieden die worden gemaakt wanneer het modeloppervlak een nagenoeg verticale helling heeft."
-
-#: fdmprinter.def.json
 msgctxt "skin_edge_support_thickness label"
 msgid "Skin Edge Support Thickness"
 msgstr "Dikte skinrandondersteuning"
@@ -2560,8 +2590,8 @@ msgstr "Snelheid Eerste Laag"
 
 #: fdmprinter.def.json
 msgctxt "speed_layer_0 description"
-msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
-msgstr "De snelheid waarmee de eerste laag wordt geprint. Hiervoor wordt een lagere waarde aanbevolen om hechting aan het platform te verbeteren."
+msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate. Does not affect the build plate adhesion structures themselves, like brim and raft."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "speed_print_layer_0 label"
@@ -5074,9 +5104,8 @@ msgstr "Rasterverwerkingsrang"
 
 #: fdmprinter.def.json
 msgctxt "infill_mesh_order description"
-msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
-msgstr "Bepaalt de prioriteit van dit raster bij meerdere overlappende vulrasters. Gebieden met meerdere overlappende vulrasters krijgen de instellingen van het"
-" vulraster met de laagste rang. Met een vulraster dat voorrang heeft, wordt de vulling van andere vulrasters en normale rasters aangepast."
+msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the highest rank. An infill mesh with a higher rank will modify the infill of infill meshes with lower rank and normal meshes."
+msgstr ""
 
 #: fdmprinter.def.json
 msgctxt "cutting_mesh label"
@@ -5424,6 +5453,16 @@ msgid "The maximum angle of overhangs after the they have been made printable. A
 msgstr "De maximale hoek van een overhang nadat deze printbaar is gemaakt. Bij een hoek van 0° worden alle overhangende gedeelten vervangen door een deel van het model dat is verbonden met het platform; bij een hoek van 90° wordt het model niet gewijzigd."
 
 #: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size label"
+msgid "Maximum Overhang Hole Area"
+msgstr ""
+
+#: fdmprinter.def.json
+msgctxt "conical_overhang_hole_size description"
+msgid "The maximum area of a hole in the base of the model before it's removed by Make Overhang Printable.  Holes smaller than this will be retained.  A value of 0 mm² will fill all holes in the models base."
+msgstr ""
+
+#: fdmprinter.def.json
 msgctxt "coasting_enable label"
 msgid "Enable Coasting"
 msgstr "Coasting Inschakelen"
@@ -6362,6 +6401,26 @@ msgctxt "mesh_rotation_matrix description"
 msgid "Transformation matrix to be applied to the model when loading it from file."
 msgstr "Omzettingsmatrix die moet worden toegepast op het model wanneer dit wordt geladen vanuit een bestand."
 
+#~ msgctxt "machine_use_extruder_offset_to_offset_coords description"
+#~ msgid "Apply the extruder offset to the coordinate system."
+#~ msgstr "Pas de extruderoffset toe op het coördinatensysteem."
+
+#~ msgctxt "shell label"
+#~ msgid "Shell"
+#~ msgstr "Shell"
+
+#~ msgctxt "max_skin_angle_for_expansion description"
+#~ msgid "Top and/or bottom surfaces of your object with an angle larger than this setting, won't have their top/bottom skin expanded. This avoids expanding the narrow skin areas that are created when the model surface has a near vertical slope. An angle of 0° is horizontal, while an angle of 90° is vertical."
+#~ msgstr "Van boven- en/of onderoppervlakken van het object met een hoek die groter is dan deze instelling, wordt de boven-/onderksin niet uitgebreid. Hiermee wordt de uitbreiding voorkomen van smalle skingebieden die worden gemaakt wanneer het modeloppervlak een nagenoeg verticale helling heeft. Een hoek van 0° is horizontaal en een hoek van 90° is verticaal."
+
+#~ msgctxt "speed_layer_0 description"
+#~ msgid "The speed for the initial layer. A lower value is advised to improve adhesion to the build plate."
+#~ msgstr "De snelheid waarmee de eerste laag wordt geprint. Hiervoor wordt een lagere waarde aanbevolen om hechting aan het platform te verbeteren."
+
+#~ msgctxt "infill_mesh_order description"
+#~ msgid "Determines the priority of this mesh when considering multiple overlapping infill meshes. Areas where multiple infill meshes overlap will take on the settings of the mesh with the lowest rank. An infill mesh with a higher order will modify the infill of infill meshes with lower order and normal meshes."
+#~ msgstr "Bepaalt de prioriteit van dit raster bij meerdere overlappende vulrasters. Gebieden met meerdere overlappende vulrasters krijgen de instellingen van het vulraster met de laagste rang. Met een vulraster dat voorrang heeft, wordt de vulling van andere vulrasters en normale rasters aangepast."
+
 #~ msgctxt "material_bed_temperature description"
 #~ msgid "The temperature used for the heated build plate. If this is 0, the bed temperature will not be adjusted."
 #~ msgstr "De temperatuur van het verwarmde platform. Als deze waarde is ingesteld op 0, wordt de printbedtemperatuur niet aangepast."
author	jelle Spijker <j.spijker@ultimaker.com>	2021-04-02 17:34:06 +0300
committer	Jelle Spijker <spijker.jelle@gmail.com>	2021-04-02 17:34:06 +0300
commit	33c33c267d5dfb3b4e87daa4e959ceba3a84dfcf (patch)
tree	ad6929a84ee04729c8bd959fa30a046b51a06558 /resources/i18n/nl_NL
parent	2a4d421e4b58dbc63e4ddcfd4dbd177ab93101e0 (diff)