Commit actual files instead of my symlinks

I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git.

Contributes to issue CURA-6742.

1 files changed, 40 insertions, 0 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..98e79c0475
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_aa0.4_BAM_Draft_Print.inst.cfg
@@ -0,0 +1,40 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 9
+type = quality
+quality_type = draft
+weight = -2
+material = generic_bam
+variant = AA 0.4
+
+[values]
+brim_replaces_support = False
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =cool_fan_speed
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_print_temperature = =default_material_print_temperature + 5
+# prime_tower_enable: see CURA-4248
+prime_tower_enable = =min(extruderValues('material_surface_energy')) < 100
+skin_overlap = 20
+speed_layer_0 = =math.ceil(speed_print * 20 / 70)
+speed_topbottom = =math.ceil(speed_print * 35 / 70)
+speed_wall = =math.ceil(speed_print * 50 / 70)
+speed_wall_0 = =math.ceil(speed_wall * 35 / 50)
+top_bottom_thickness = 1
+wall_thickness = 1
+support_brim_enable = True
+support_interface_enable = True
+support_interface_density = =min(extruderValues('material_surface_energy'))
+support_interface_pattern = ='lines' if support_interface_density < 100 else 'concentric'
+support_top_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_bottom_distance = =math.ceil(min(extruderValues('material_adhesion_tendency')) / 2) * layer_height
+support_angle = 45
+support_join_distance = 5
+support_offset = 2
+support_pattern = triangles
+support_infill_rate = =10 if support_enable else 0 if support_tree_enable else 10