Commit actual files instead of my symlinks

I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git.

Contributes to issue CURA-6742.

1 files changed, 43 insertions, 0 deletions

diff --git a/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
new file mode 100644
index 0000000000..a5bdfad16a
--- /dev/null
+++ b/resources/quality/ultimaker_s3/um_s3_cc0.6_PLA_Draft_Print.inst.cfg
@@ -0,0 +1,43 @@
+[general]
+version = 4
+name = Fast
+definition = ultimaker_s3
+
+[metadata]
+setting_version = 9
+type = quality
+quality_type = draft
+weight = -3
+material = generic_pla
+variant = CC 0.6
+is_experimental = True
+
+[values]
+cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
+cool_fan_speed_max = =100
+cool_min_speed = 2
+gradual_infill_step_height = =3 * layer_height
+infill_line_width = =round(line_width * 0.65 / 0.75, 2)
+infill_pattern = triangles
+line_width = =machine_nozzle_size * 0.9375
+machine_nozzle_cool_down_speed = 0.75
+machine_nozzle_heat_up_speed = 1.6
+material_final_print_temperature = =max(-273.15, material_print_temperature - 15)
+material_initial_print_temperature = =max(-273.15, material_print_temperature - 10)
+material_print_temperature = =default_material_print_temperature + 10
+material_standby_temperature = 100
+prime_tower_enable = True
+retract_at_layer_change = False
+speed_print = 45
+speed_topbottom = =math.ceil(speed_print * 35 / 45)
+speed_wall = =math.ceil(speed_print * 40 / 45)
+speed_wall_x = =speed_wall
+speed_wall_0 = =math.ceil(speed_wall * 35 / 40)
+support_angle = 70
+support_line_width = =line_width * 0.75
+support_pattern = ='triangles'
+support_xy_distance = =wall_line_width_0 * 1.5
+top_bottom_thickness = =layer_height * 4
+wall_line_width = =round(line_width * 0.75 / 0.75, 2)
+wall_line_width_x = =round(wall_line_width * 0.625 / 0.75, 2)
+wall_thickness = =wall_line_width_0 + wall_line_width_x