take review of failures

15 files changed, 57 insertions, 42 deletions

diff --git a/resources/quality/nps/nps_ABS_A.inst.cfg b/resources/quality/nps/nps_ABS_A.inst.cfg
index 28de2e7a4f..bd7502314e 100644
--- a/resources/quality/nps/nps_ABS_A.inst.cfg
+++ b/resources/quality/nps/nps_ABS_A.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = a

 weight = 1

-material = naxe_ABS

+material = generic_abs

 

 [values]

 layer_height_0 = =round(0.5*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 19 * layer_height

 cool_min_speed = 10

 support_angle = 65

-material_print_temperature = =default_material_print_temperature + 1

-material_print_temperature_layer_0 = =default_material_print_temperature

+material_print_temperature = =240

+material_print_temperature_layer_0 = =240

+material_bed_temperature = 100

 material_flow = 100

 retraction_extra_prime_amount = 0.1

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_ABS_B.inst.cfg b/resources/quality/nps/nps_ABS_B.inst.cfg
index 516bc72ccd..7e0436d1a6 100644
--- a/resources/quality/nps/nps_ABS_B.inst.cfg
+++ b/resources/quality/nps/nps_ABS_B.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = b

 weight = 0

-material = naxe_ABS

+material = generic_abs

 

 [values]

 layer_height_0 = =round(0.67*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 14 * layer_height

 cool_min_speed = 10

 support_angle = 60

-material_print_temperature = =default_material_print_temperature + 3

-material_print_temperature_layer_0 = =default_material_print_temperature + 1

+material_print_temperature = =243

+material_print_temperature_layer_0 = =243

+material_bed_temperature = 100

 material_flow = 96

 retraction_extra_prime_amount = 0.1

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_ABS_C.inst.cfg b/resources/quality/nps/nps_ABS_C.inst.cfg
index 31ef47a43a..5a07d098e4 100644
--- a/resources/quality/nps/nps_ABS_C.inst.cfg
+++ b/resources/quality/nps/nps_ABS_C.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = c

 weight = -1

-material = naxe_ABS

+material = generic_abs

 

 [values]

 layer_height_0 = =round(0.75*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 9 * layer_height

 cool_min_speed = 10

 support_angle = 55

-material_print_temperature = =default_material_print_temperature + 5

-material_print_temperature_layer_0 = =default_material_print_temperature +3

+material_print_temperature = =245

+material_print_temperature_layer_0 = =245

+material_bed_temperature = 100

 material_flow = 91

 retraction_extra_prime_amount = 0.1

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_PC_A.inst.cfg b/resources/quality/nps/nps_PC_A.inst.cfg
index 90d95b340f..3a7b22ab5c 100644
--- a/resources/quality/nps/nps_PC_A.inst.cfg
+++ b/resources/quality/nps/nps_PC_A.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = a

 weight = 1

-material = naxe_PC

+material = generic_pc

 

 [values]

 layer_height_0 = =round(0.5*machine_nozzle_size, 2)

@@ -31,9 +31,10 @@ cool_fan_full_at_height = =layer_height_0 + 2 * layer_height
 cool_min_speed = 12

 support_angle = 60

 cool_lift_head = true

-material_print_temperature = 260

-material_print_temperature_layer_0 = 265

-material_flow = 88

+material_print_temperature = =280

+material_print_temperature_layer_0 = =280

+material_bed_temperature = 110

+material_flow = 100

 wall_line_count = 3

 retraction_extra_prime_amount = 0.1

 retraction_speed = 30

diff --git a/resources/quality/nps/nps_PC_B.inst.cfg b/resources/quality/nps/nps_PC_B.inst.cfg
index 0611313995..a1db650a72 100644
--- a/resources/quality/nps/nps_PC_B.inst.cfg
+++ b/resources/quality/nps/nps_PC_B.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = b

 weight = 0

-material = naxe_PC

+material = generic_pc

 

 [values]

 layer_height_0 = =round(0.67*machine_nozzle_size, 2)

@@ -33,6 +33,7 @@ cool_lift_head = true
 support_angle = 60

 material_print_temperature = 270

 material_print_temperature_layer_0 = 275

+material_bed_temperature = 110

 material_flow = 88

 wall_line_count = 3

 retraction_speed = 30

diff --git a/resources/quality/nps/nps_PC_C.inst.cfg b/resources/quality/nps/nps_PC_C.inst.cfg
index 0e26f46fdf..22ba7dcbd4 100644
--- a/resources/quality/nps/nps_PC_C.inst.cfg
+++ b/resources/quality/nps/nps_PC_C.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = c

 weight = -1

-material = naxe_PC

+material = generic_pc

 

 [values]

 layer_height_0 = =round(0.75*machine_nozzle_size, 2)

@@ -33,6 +33,7 @@ support_angle = 60
 cool_lift_head = true

 material_print_temperature = 270

 material_print_temperature_layer_0 = 275

+material_bed_temperature = 110

 material_flow = 88

 wall_line_count = 3

 retraction_speed = 30

diff --git a/resources/quality/nps/nps_PETG_A.inst.cfg b/resources/quality/nps/nps_PETG_A.inst.cfg
index efdd6d525c..c9e9a74c24 100644
--- a/resources/quality/nps/nps_PETG_A.inst.cfg
+++ b/resources/quality/nps/nps_PETG_A.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = a

 weight = 1

-material = naxe_PETG

+material = generic_petg

 

 [values]

 layer_height_0 = =round(0.5*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 3 * layer_height

 cool_min_speed = 10

 support_angle = 65

-material_print_temperature = =default_material_print_temperature

-material_print_temperature_layer_0 = =default_material_print_temperature

+material_print_temperature = =235

+material_print_temperature_layer_0 = =230

+material_bed_temperature = 80

 material_flow = 98

 retraction_extra_prime_amount = 0

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_PETG_B.inst.cfg b/resources/quality/nps/nps_PETG_B.inst.cfg
index aa7eb30599..c5f96c383f 100644
--- a/resources/quality/nps/nps_PETG_B.inst.cfg
+++ b/resources/quality/nps/nps_PETG_B.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = b

 weight = 0

-material = naxe_PETG

+material = generic_petg

 

 [values]

 layer_height_0 = =round(0.67*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 3 * layer_height

 cool_min_speed = 10

 support_angle = 60

-material_print_temperature = =default_material_print_temperature + 5

-material_print_temperature_layer_0 = =default_material_print_temperature

+material_print_temperature = =235

+material_print_temperature_layer_0 = =230

+material_bed_temperature = 80

 material_flow = 95

 retraction_extra_prime_amount = 0

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_PETG_C.inst.cfg b/resources/quality/nps/nps_PETG_C.inst.cfg
index ca13ce1b30..04ef5fa32e 100644
--- a/resources/quality/nps/nps_PETG_C.inst.cfg
+++ b/resources/quality/nps/nps_PETG_C.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = c

 weight = -1

-material = naxe_PETG

+material = generic_petg

 

 [values]

 layer_height_0 = =round(0.75*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 3 * layer_height

 cool_min_speed = 10

 support_angle = 55

-material_print_temperature = =default_material_print_temperature + 10

-material_print_temperature_layer_0 = =default_material_print_temperature +5

+material_print_temperature = =235

+material_print_temperature_layer_0 = =230

+material_bed_temperature = 80

 material_flow = 91

 retraction_extra_prime_amount = 0

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_PLA_A.inst.cfg b/resources/quality/nps/nps_PLA_A.inst.cfg
index 39c83cefe4..d36c6c4af3 100644
--- a/resources/quality/nps/nps_PLA_A.inst.cfg
+++ b/resources/quality/nps/nps_PLA_A.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = a

 weight = 1

-material = naxe_PLA

+material = generic_pla

 

 [values]

 layer_height_0 = =round(0.5*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height

 cool_min_speed = 10

 support_angle = 65

-material_print_temperature = =default_material_print_temperature

-material_print_temperature_layer_0 = =default_material_print_temperature -5

+material_print_temperature = =215

+material_print_temperature_layer_0 = =210

+material_bed_temperature = 60

 material_flow = 98

 retraction_extra_prime_amount = 0.1

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_PLA_B.inst.cfg b/resources/quality/nps/nps_PLA_B.inst.cfg
index 03407e6fa7..df117d52c2 100644
--- a/resources/quality/nps/nps_PLA_B.inst.cfg
+++ b/resources/quality/nps/nps_PLA_B.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = b

 weight = 0

-material = naxe_PLA

+material = generic_pla

 

 [values]

 layer_height_0 = =round(0.67*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height

 cool_min_speed = 10

 support_angle = 60

-material_print_temperature = =default_material_print_temperature + 5

-material_print_temperature_layer_0 = =default_material_print_temperature

+material_print_temperature = =215

+material_print_temperature_layer_0 = =220

+material_bed_temperature = 60

 material_flow = 95

 retraction_extra_prime_amount = 0.1

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_PLA_C.inst.cfg b/resources/quality/nps/nps_PLA_C.inst.cfg
index 852fefa293..2a5c64f616 100644
--- a/resources/quality/nps/nps_PLA_C.inst.cfg
+++ b/resources/quality/nps/nps_PLA_C.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = c

 weight = -1

-material = naxe_PLA

+material = generic_pla

 

 [values]

 layer_height_0 = =round(0.75*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 2 * layer_height

 cool_min_speed = 10

 support_angle = 55

-material_print_temperature = =default_material_print_temperature + 10

-material_print_temperature_layer_0 = =default_material_print_temperature + 5

+material_print_temperature = =215

+material_print_temperature_layer_0 = =220

+material_bed_temperature = 60

 material_flow = 91

 retraction_extra_prime_amount = 0.1

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_TPU_A.inst.cfg b/resources/quality/nps/nps_TPU_A.inst.cfg
index 6b334ffe31..3962513493 100644
--- a/resources/quality/nps/nps_TPU_A.inst.cfg
+++ b/resources/quality/nps/nps_TPU_A.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = a

 weight = 1

-material = naxe_TPU

+material = generic_tpu

 

 [values]

 layer_height_0 = =round(0.5*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height

 cool_min_speed = 10

 support_angle = 50

-material_print_temperature = =default_material_print_temperature + 3

-material_print_temperature_layer_0 = =default_material_print_temperature - 3

+material_print_temperature = =215

+material_print_temperature_layer_0 = =215

+material_bed_temperature = 45

 material_flow = 107

 retraction_extra_prime_amount = 0.2

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_TPU_B.inst.cfg b/resources/quality/nps/nps_TPU_B.inst.cfg
index e5ae5d323c..082b83ee45 100644
--- a/resources/quality/nps/nps_TPU_B.inst.cfg
+++ b/resources/quality/nps/nps_TPU_B.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = b

 weight = 0

-material = naxe_TPU

+material = generic_tpu

 

 [values]

 layer_height_0 = =round(0.67*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height

 cool_min_speed = 10

 support_angle = 50

-material_print_temperature = =default_material_print_temperature + 5

-material_print_temperature_layer_0 = =default_material_print_temperature

+material_print_temperature = =215

+material_print_temperature_layer_0 = =210

+material_bed_temperature = 45

 material_flow = 103

 retraction_extra_prime_amount = 0.2

 retraction_min_travel = =3*line_width

diff --git a/resources/quality/nps/nps_TPU_C.inst.cfg b/resources/quality/nps/nps_TPU_C.inst.cfg
index bef1a0a29c..d52fe0f941 100644
--- a/resources/quality/nps/nps_TPU_C.inst.cfg
+++ b/resources/quality/nps/nps_TPU_C.inst.cfg
@@ -8,7 +8,7 @@ setting_version = 19
 type = quality

 quality_type = c

 weight = -1

-material = naxe_TPU

+material = generic_tpu

 

 [values]

 layer_height_0 = =round(0.75*machine_nozzle_size, 2)

@@ -30,8 +30,9 @@ cool_min_layer_time = 11
 cool_fan_full_at_height = =layer_height_0 + 4 * layer_height

 cool_min_speed = 10

 support_angle = 50

-material_print_temperature = =default_material_print_temperature + 7

-material_print_temperature_layer_0 = =default_material_print_temperature + 3

+material_print_temperature = =215

+material_print_temperature_layer_0 = =215

+material_bed_temperature = 45

 material_flow = 101

 retraction_extra_prime_amount = 0.2

 retraction_min_travel = =3*line_width