Welcome to mirror list, hosted at ThFree Co, Russian Federation.

github.com/Ultimaker/CuraEngine.git - Unnamed repository; edit this file 'description' to name the repository.
summaryrefslogtreecommitdiff
BranchCommit messageAuthorAge
15.06bugfix: sliceDataStorage.meshes reallocation due to size changeTim Kuipers9 years
15.10Add support for setting CuraEngine version from CMakeArjen Hiemstra9 years
2.1fix: raft outline now uses rounded offset (CURA-1835)Tim Kuipers8 years
2.3Revert "feat: setting for carveMultipleVolumes (CURA-2712)"Tim Kuipers8 years
2.4Fix spiralize args bug - untested but this just looked wrong to me.Mark Burton7 years
2.5fix: apply print_speed_layer_0 on prime tower rather than travel speed (CURA-...Tim Kuipers7 years
2.6Do not generate support when layer number is negativeLipu Fei7 years
2.7fix: print thin walls accounts for wall_0_inset (CURA-4023)Tim Kuipers7 years
3.0Fix spaghetti infill crashLipu Fei7 years
3.1Fix possible segfault due to accessing deleted TopSurfaceLipu Fei6 years
3.2Also reset E using G92 on BFB and Makerbot flavoursGhostkeeper6 years
3.3Merge branch '3.3' of github.com:Ultimaker/CuraEngine into 3.3Diego Prado Gesto6 years
3.4CURA-5374 processPerimeterGaps now uses skin_line_width for skin parts instea...Jack Ha6 years
3.5Bug fix in comb path generation - correct fwd path length before comparing wi...Mark Burton6 years
3.6Merge branch 'mb-fix-multiple-bridge-layers-enable' of https://github.com/sma...Jaime van Kessel6 years
4.0Merge pull request #995 from Ultimaker/CURA-6226_remove_travel_disabled_prime...Lipu Fei5 years
4.1Simplify: Absolute value not needed when squared anyway. [CURA-6530]Remco Burema5 years
4.10Properly round layer countsGhostkeeper3 years
4.11Improve assertion for insane point outputKonstantinos Karmas3 years
4.12Simpler way of finding tree-point insude part.Remco Burema3 years
4.13Split two options of removeDegenerateVerts into separate functionsGhostkeeper2 years
4.2Create ooze shield only for outside polygonsGhostkeeper5 years
4.3Fix bug that caused the corner shift to be weighted too muchGhostkeeper5 years
4.4Don't forget to update last_extruderGhostkeeper5 years
4.5Merge pull request #1206 from Ultimaker/CURA-7229_fix_crash_randomize_infill_...Remco Burema4 years
4.6Revert "Merge pull request #1238 from Ultimaker/CURA-7352_fix_simple_blocker"Ghostkeeper4 years
4.7Merge pull request #1304 from Ultimaker/CURA-7648_swap_roof_for_brimJelle Spijker4 years
4.8Merge pull request #1352 from Ultimaker/CURA-7804_Fill_gaps_between_walls_fil...Jelle Spijker4 years
4.9Fix interpretation of getExtrudersUsedGhostkeeper3 years
5.0Merge pull request #1659 from Ultimaker/fix_microsegments_againCasper Lamboo2 years
5.1Use umbase 0.1.5jspijker22 months
5.2Add conandata for the 5.2.1 releasejspijker19 months
CT_fixDon't use ARCUS_EXPORT for the mock socketJelle Spijker24 months
CURA-6513_fix_adaptive_layersFix empty layers in adaptive layersLipu Fei5 years
CURA-6711_support_structure_dropdownUse Settings by reference in TreeSupportNino van Hooff4 years
CURA-7221_swap_out_logging_for_spdlogDon't sort the includesjspijker21 months
CURA-7271_slow_lines_individually_minimum_layer_timefix slowest path speed calculation and add commentsRijk van Manen19 months
CURA-7557-inset-optimiser-useChange the name from insets to outer wallsJaime van Kessel4 years
CURA-7828_connect_polygonsEarly-out when finding reasonably good connectionsGhostkeeper2 years
CURA-7926_bottom_layers_spiralizeFix typo, wall_count was being passed in as wall_0_inset.Joey de l'Arago20 months
CURA-7948_experimentsExperiment with removing all edges without twinsGhostkeeper3 years
CURA-7948_remove_singular_edgesAdd clean-up that removes singular edges without any twinGhostkeeper3 years
CURA-7948_remove_singular_nodesAlso remove nodes linking to deleted edgesGhostkeeper3 years
CURA-7950_brim_lines_ordered_incorrectlyRemove the epsilon from the findStartLocationJaime van Kessel2 years
CURA-7952_Fix_running_into_edges_without_a_twinMake arrow head size relative to line widthGhostkeeper3 years
CURA-7970_voronoi_graph_integer_rounding_experimentsMerge branch 'CURA-7970_voronoi_graph_integer_rounding' into CURA-7970_vorono...Ghostkeeper3 years
CURA-8258_spdlogMerge remote-tracking branch 'origin/5.0' into CURA-8258_spdlogJelle Spijker2 years
CURA-8600Fix commentsCasper Lamboo20 months
CURA-8615_further_fixesFind strings which aren't monotonic instead.Remco Burema3 years
CURA-8636_rdpFix losing properties of ExtrusionLine in simplificationGhostkeeper24 months
CURA-8636_rdp_debugAdd testing code againGhostkeeper24 months
CURA-8640_PyQt6_upgradeDisable openmp on MacJelle Spijker2 years
CURA-8694_Retracted_unnecessary_travel_moves_part_II_return_of_the_combSet paths to `cross_boundary` is true for paths that might cross a boundaryc.lamboo2 years
CURA-8708_remove_travel_acceleration_jerkFactor out finding of the next extrusion moveGhostkeeper2 years
CURA-8737_debugPreliminary changes to split off flow from line widthGhostkeeper2 years
CURA-8830_total_recipeDebug which version is build with test-package.Remco Burema21 months
CURA-8875_Uneven_seam_in_ArachneAdd tie-breaker to seam score calculationsc.lamboo2 years
CURA-8890-hole-horizontal-expansion-max-diametergradually reduce hole horizontal expansion for large holesRijk van Manen18 months
CURA-9031_add_and_send_slice_uuidUse StrinLike conceptjspijker21 months
CURA-9033_adjust_combing_areasRemove debugging codeGhostkeeper23 months
CURA-9041_Remove_Raft_insideExpand check for backtracing to prevent going into multiple convex loopsGhostkeeper23 months
CURA-9077_endcap_missing_supportAdd missing parameter to infill constructorGhostkeeper2 years
CURA-9083This fixes travels being unretracted on the top most surface skin layer(s) wh...j.delarago2 years
CURA-9087_refix_brim_line_orderAdd a stealth 'z' seam type for skirt/brim.Remco Burema21 months
CURA-9158Change line_spacing back to line_width, line_spacing has been changed to matc...j.delarago2 years
CURA-9163Revert "Set paths to `cross_boundary` is true for paths that might cross a bo...c.lamboo2 years
CURA-9163-hairy_holesRetract combing moves that intersect the boundary of the modelc.lamboo2 years
CURA-9177_Fix_CI_CTUse our own clang-tidy configJelle Spijker2 years
CURA-9178_crash_voronoiAdd function to clean Voronoi diagrams of missing twinsGhostkeeper2 years
CURA-9178_crash_voronoi_debugAdd debugging code and attempts at fixesGhostkeeper2 years
CURA-9178_port_external_voronoi_fixesRevert "Check for clockwiseness was inverted?"Remco Burema20 months
CURA-9178_temp_sidebranchFix typo.Remco Burema20 months
CURA-9206_slicing_errorCheck if infill_lines is empty to avoid error from modulo 0 operation.casper2 years
CURA-9225_prime_for_raftThe same, but refactored to be more efficient.Remco Burema22 months
CURA-9294_inner_walls_outside_fixSelect opposite start-vertex for backwards paths.Remco Burema22 months
CURA-9295_Overextrusion_when_printing_with_gradual_infill_Make sure lowest density gradual infill is connected to the wallc.lamboo23 months
CURA-9295_gradual_infill_overextrusion_arachneDon't use iterator of different polygon to insertGhostkeeper23 months
CURA-9296_Travel_trough_model_wehn_printing_PVARemove `LazyInialization` classc.lamboo2 years
CURA-9296_Travel_trough_model_when_printing_PVARemove `LazyInialization` classc.lamboo2 years
CURA-9331_fix_randomize_start_on_emptyExpand check for empty pathsGhostkeeper23 months
CURA-9343Fix seam placement if fuzzy skin is enabledc.lamboo20 months
CURA-9350_support_interface_wallFix 1000x too much walls for support interface.Remco Burema18 months
CURA-9357Code style Casper Lamboo21 months
CURA-9357_hide_middle_line_threshold_settingsRemove settings from frontend.Remco Burema22 months
CURA-9365_fix_building_cura_mainsmall fixesjspijker23 months
CURA-9367_narrow_skin_spikesplit narrow skin and skin removal widthRijk van Manen19 months
CURA-9377_debugAdd voronoi svg testingjoeydelarago22 months
CURA-9377_fix_transitions_out_of_rangeDon't add transitions that were out of rangeGhostkeeper22 months
CURA-9383Use leaf settings in favor of `adhesion_extruder_nr`c.lamboo22 months
CURA-9425_fix_simplify_spiralizeDistance to moved point should be w.r.t. segment.Remco Burema22 months
CURA-9427_crash_support_on_raftFix for negative indices.Remco Burema23 months
CURA-9469_fix_failing_testsCleaned up some headersjspijker22 months
CURA-9472_win_gyroid_crashFilter out empty polygons left over from 'simplify'.Remco Burema22 months
CURA-9473_fix_horizontal_expansionHorizontal Expansion and Initial Horizontal Expansion where swapped.Remco Burema22 months
CURA-9486_Hide_Seam_is_printed_more_randomly_Merge branch 'main' into CURA-9486_Hide_Seam_is_printed_more_randomly_jspijker18 months
CURA-9515_fix_monotonic_duplicationFix overextrusion due to premature optimization in monotonic.Remco Burema21 months
CURA-9548_min_support_area_splitMerge branch 'main' into CURA-9548_min_support_area_splitRemco Burema18 months
CURA-9559Fix Cura crashing on certain modelsc.lamboo20 months
CURA-9564_fix_support_interfaceSVG showing support areasJoey de l'Arago19 months
CURA-9623-bridge-skin-should-not-be-expandeddon't add extra skin overlap for bridge skinRijk van Manen19 months
CURA-9751-improve-lift-head-behaviourMerge branch 'main' into CURA-9751-improve-lift-head-behaviourRijk van Manen19 months
CURA-9775_orderMerge branch 'main' into CURA-9775_orderjspijker18 months
CURA-9790-reconfigure-gradual-infilltake new parent setting into accountRijk van Manen18 months
CURA-9844_fix-disconnected-supportMerge branch 'main' into CURA-9844_fix-disconnected-supportRijk van Manen18 months
CURA-9872-dont-reduce-speed-for-high-minimum-speedthe slow down should be added to already existing slowdownsRijk van Manen18 months
Piezoid-remove-openmp_rebasedAdd vector include and alphabetize includes.Remco Burema23 months
PyQt6_upgradeMerge branch 'CURA-7924_update_to_sip6' into PyQt6_upgradeGhostkeeper2 years
UMH-2021_ribbed_vaults_infill__rerootingreconnect trees from leaf if root has to be reconnected to a slope otherwiseBagelOrb3 years
UMH-2022_litening_supportMerge branch 'master' into UMH-2022_litening_supportRemco Burema2 years
VariableWidthPaths_renamecomment to clarify nested vector of wallsTim Kuipers2 years
WIP_cross_compileWIPLipu Fei4 years
WIP_fix_stbWIP: Fix stbLipu Fei4 years
WIP_osx_gccWIP: Build with GCC on OSXLipu Fei5 years
a_d_revertDon't add support geometry to model boundaryc.lamboo2 years
all_polyline_fixes_rebasedremove superfluous unimplemented function definitionsTim Kuipers2 years
boomanaiden154-masterMerge branch 'master' of https://github.com/boomanaiden154/CuraEngine into bo...Remco Burema2 years
boyscout_1Use filesystem instead of custom getPathjspijker21 months
boyscout_fmt_intpoint_jelleAdd ExtrusionLine formatterjspijker19 months
boyscout_ranger_jelleUse drop_last to loop over rangesJelle Spijker19 months
brim_per_materialinitial brim printing order requirementsTim Kuipers2 years
brim_per_material_optimized_orderfix for high hole_brim_distanceTim Kuipers21 months
brim_per_material_optimized_order_old_unrebasedfix for high hole_brim_distanceTim Kuipers2 years
center_last_settingremove center_last functionalityTim Kuipers2 years
conan/4.13Use Conan as a dependency managerJelle Spijker2 years
conan/CURA-8852Take support xy distance into account when dropping nodesJelle Spijker2 years
conan/libArachne_rebaseduse conan as dependency managerJelle Spijker3 years
conan/masterUse the ultimaker_layoutJelle Spijker2 years
cura-9551_print_concentric_sequentiallyUse ranges to determine the max used junction widthjspijker19 months
dependabot/pip/bottle-0.12.20Bump bottle from 0.12.19 to 0.12.20dependabot[bot]24 months
dependabot/pip/pyjwt-2.4.0Bump pyjwt from 1.7.1 to 2.4.0dependabot[bot]24 months
export_outline_to_svgoutput in terms of Z rather than layer nrTim Kuipers5 years
feat_min_supporting_model_areaDisarm boolean trapGhostkeeper4 years
feat_transition_filter_limitremove Arachne parameter defaultsTim Kuipers2 years
feature_estimate_dissolving_timeDebug output to copy to CalcGhostkeeper6 years
fix_surface_mode_both_cutting_meshDon't remove surface mode both cutting mesh areas.Tim Kuipers21 months
flow_advanceFilter short flow changes before advancing splits in timeGhostkeeper3 years
fractal_ditheringlil SquareSubdivTest changesTim Kuipers5 years
immediate_visualizationSend support structures for visualisationGhostkeeper2 years
interlocking_carvingprevent reduced width beams where interlocking structure meets boundaryTim Kuipers4 years
interlocking_genmove header files to include dirTim Kuipers21 months
legacyAllow the engine to use dynamic acceleration settings to get better time esti...daid8 years
libArachne_rebasedMerge pull request #1539 from Ultimaker/CURA-8492_missing_support_layersCasper Lamboo2 years
mainUse Python 3.11Jelle Spijker18 months
masterMerge pull request #1664 from Ultimaker/CURA-9083Casper Lamboo2 years
optimize_polyline_orderapply polygon stitching to open polylinesTim Kuipers3 years
polygonamoryUse enum as axisJelle Spijker18 months
pva_support_fixDon't set cross_boundary when failing to avoid obstaclec.lamboo2 years
revert-1539-CURA-8492_missing_support_layersRevert "[CURA-8492] Only keep processing when there really is no support."Casper Lamboo2 years
scale_fan_speedAdd 'Scale Fan Speed From 0 to 1' Setting.Remco Burema2 years
sparselinegrid_insert_cleanupA little refactor/cleanup for sparse line grid insert.Remco Burema21 months
support_gap_filler_fixAdd TODO notice about infill gap fillersTim Kuipers2 years
surface_mode_crossings_fixMerge branch 'master' into surface_mode_crossings_fixLipu Fei4 years
surface_modifier_meshesfix surface mode infill meshesTim Kuipers4 years
temp_umh2022_branchmove ugly WIP work to different folder via gith :-pRemco Burema2 years
texture_processing_color_modelfix: omit threading funcitonality if not compiling with open MPTim Kuipers6 years
tree_support_max_radiusfeat: support_tree_max_diameterBagelOrb21 months
update_to_sip_6Change namespaces of some arcus enumsJaime van Kessel2 years
volumetric_propinitial implementation volumetric property providerTim Kuipers7 years
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-19 19:27:37 +0300