Age | Commit message (Collapse) | Author |
|
Update to build procedure with VS using CMake/CTest.
* js/cmake-updates:
cmake: increase time-out for a long-running test
cmake: avoid editing t/test-lib.sh
add -p: avoid ambiguous signed/unsigned comparison
cmake: copy the merge tools for testing
cmake: make it easier to diagnose regressions in CTest runs
|
|
In 7f5397a07c6c (cmake: support for testing git when building out of the
source tree, 2020-06-26), we implemented support for running Git's test
scripts even after building Git in a different directory than the source
directory.
The way we did this was to edit the file `t/test-lib.sh` to override
`GIT_BUILD_DIR` to point somewhere else than the parent of the `t/`
directory.
This is unideal because it always leaves a tracked file marked as
modified, and it is all too easy to commit that change by mistake.
Let's change the strategy by teaching `t/test-lib.sh` to detect the
presence of a file called `GIT-BUILD-DIR` in the source directory. If it
exists, the contents are interpreted as the location to the _actual_
build directory. We then write this file as part of the CTest
definition.
To support building Git via a regular `make` invocation after building
it using CMake, we ensure that the `GIT-BUILD-DIR` file is deleted (for
convenience, this is done as part of the Makefile rule that is already
run with every `make` invocation to ensure that `GIT-BUILD-OPTIONS` is
up to date).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Source file shuffling.
* ac/fuzzers:
fuzz: reorganise the path for existing oss-fuzz fuzzers
|
|
Like most builtins, 'version' is documented in a corresponding
'Documentation/git-version.txt' and can be invoked with 'git version'.
However, the 'check-docs' Makefile target showed that it was "removed but
documented: git-version." This was cause by the fact that it is not built as
a standalone 'git-version' executable, therefore appearing "removed" to
'check-docs'.
Without a precedent for documented builtins that aren't built into an
executable *or* any clear reason why a standalone 'git-version' shouldn't
exist, the 'check-docs' error appears to correctly identify an issue. To
correct that mismatch, add 'git-version' to the 'BUILT_INS' list in the root
Makefile (indicating that the 'cmd_version()' function appears in a file
that is *not* 'builtin/version.c'). Additionally, to avoid the "no link"
message in 'check-docs', list 'git-version' as an "ancilliaryinterrogator"
(like 'git help') in 'command-list.txt'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to provide a better organisation for oss-fuzz fuzzers and
to avoid top-level clustters in the git repository when more fuzzers
are introduced, move the existing fuzzer-related sources to their
own oss-fuzz/ hierarchy. Grouping the fuzzers into their own
directory, separate their application on fuzz-testing from the core
functionalities of the git code, prvides better and tidier structure
the oss-fuzz fuzzing library to manage, locate, build and execute
those fuzzers for fuzz-testing purposes in future development.
Signed-off-by: Arthur Chan <arthur.chan@adalogics.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move 'scalar' out of 'contrib/' and into the root of the Git tree. The goal
of this change is to build 'scalar' as part of the standard Git build &
install processes.
This patch includes both the physical move of Scalar's files out of
'contrib/' ('scalar.c', 'scalar.txt', and 't9xxx-scalar.sh'), and the
changes to the build definitions in 'Makefile' and 'CMakelists.txt' to
accommodate the new program.
At a high level, Scalar is built so that:
- there is a 'scalar-objs' target (similar to those created in 029bac01a8
(Makefile: add {program,xdiff,test,git,fuzz}-objs & objects targets,
2021-02-23)) for debugging purposes.
- it appears in the root of the install directory (rather than the
gitexecdir).
- it is included in the 'bin-wrappers/' directory for use in tests.
- it receives a platform-specific executable suffix (e.g., '.exe'), if
applicable.
- 'scalar.txt' is installed as 'man1' documentation.
- the 'clean' target removes the 'scalar' executable.
Additionally, update the root level '.gitignore' file to ignore the Scalar
executable.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a 'git diagnose' builtin to generate a standalone zip archive of
repository diagnostics.
The "diagnose" functionality was originally implemented for Scalar in
aa5c79a331 (scalar: implement `scalar diagnose`, 2022-05-28). However, the
diagnostics gathered are not specific to Scalar-cloned repositories and
can be useful when diagnosing issues in any Git repository.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the overly broad .gitignore and "make clean" rule added in
ce39c2e04ce (Provide a Windows version resource for the git
executables., 2012-05-24).
For now this is merely a correctness fix, but needed because a
subsequent commit will want to check in *.res files elsewhere in the
tree, which we shouldn't have to "git add -f".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before commit fc0fd5b23b (Makefile: help gettext tools to cope with our
custom PRItime format, 2017-07-20), we'd consider source files as-is
with gettext, but because we need to understand PRItime in the same way
that gettext itself understands PRIuMAX, we'd first check if we had a
clean checkout, then munge all of the processed files in-place with
"sed", generate "po/git.pot", and then finally "reset --hard" to undo
our changes.
By generating "pot" snippets in ".build/pot/po" for each source file
and rewriting certain source files with PRItime macros to temporary
files in ".build/pot/po", we can avoid running "make pot" by altering
files in place and doing a "reset --hard" afterwards.
This speed of "make pot" is slower than before on an initial run,
because we run "xgettext" many times (once per source file), but it
can be boosted by parallelization. It is *much* faster for incremental
runs, and will allow us to implement related targets in subsequent
commits.
When the "pot" target was originally added in cd5513a7168 (i18n:
Makefile: "pot" target to extract messages marked for translation,
2011-02-22) it behaved like a "normal" target. I.e. we'd skip the
re-generation of the po/git.pot if nothing had to be done.
Then after po/git.pot was checked in in dce37b66fb0 (l10n: initial
git.pot for 1.7.10 upcoming release, 2012-02-13) the target was broken
until 1f31963e921 (i18n: treat "make pot" as an explicitly-invoked
target, 2014-08-22) when it was made to depend on "FORCE". I.e. the
Makefile's dependency resolution inherently can't handle incremental
building when the target file may be updated by git (or something else
external to "make"). But this case no longer applies, so FORCE is no
longer needed.
That out of the way, the main logic change here is getting rid of the
"reset --hard":
We'll generate intermediate ".build/pot/po/%.po" files from "%", which
is handy to see at a glance what strings (if any) in a given file are
marked for translation:
$ make .build/pot/po/pretty.c.po
[...]
$ cat .build/pot/po/pretty.c.po
#: pretty.c:1051
msgid "unable to parse --pretty format"
msgstr ""
$
For these C source files which contain the PRItime macros, we will
create temporary munged "*.c" files in a tree in ".build/pot/po"
corresponding to our source tree, and have "xgettext" consider those.
The rule needs to be careful to "(cd .build/pot/po && ...)", because
otherwise the comments in the po/git.pot file wouldn't refer to the
correct source locations (they'd be prefixed with ".build/pot/po").
These temporary munged "*.c” files will be removed immediately after
the corresponding po files are generated, because some development tools
cannot ignore the duplicate source files in the ".build" directory
according to the ".gitignore" file, and that may cause trouble.
The output of the generated po/git.pot file is changed in one minor
way: Because we're using msgcat(1) instead of xgettext(1) to
concatenate the output we'll now disambiguate where "TRANSLATORS"
comments come from, in cases where a message is the same in N files,
and either only one has a "TRANSLATORS" comment, or they're
different. E.g. for the "Your edited hunk[...]" message we'll now
apply this change (comment content elided):
+#. #-#-#-#-# add-patch.c.po #-#-#-#-#
#. TRANSLATORS: do not translate [y/n]
[...]
+#. #-#-#-#-# git-add--interactive.perl.po #-#-#-#-#
#. TRANSLATORS: do not translate [y/n]
[...]
#: add-patch.c:1253 git-add--interactive.perl:1244
msgid ""
"Your edited hunk does not apply. Edit again (saying \"no\" discards!) [y/n]? "
msgstr ""
There are six such changes, and they all make the context more
understandable, as msgcat(1) is better at handling these edge cases
than xgettext(1)'s previously used "--join-existing" flag.
But filenames in the above disambiguation lines of extracted-comments
have an extra ".po" extension compared to the filenames at the file
locations. While we could rename the intermediate ".build/pot/po/%.po"
files without the ".po" extension to use more intuitive filenames in
the disambiguation lines of extracted-comments, but that will confuse
developer tools with lots of invalid C or other source files in
".build/pot/po" directory.
The addition of "--omit-header" option for xgettext makes the "pot"
snippets in ".build/pot/po/*.po" smaller. But as we'll see in a
subsequent commit this header behavior has been hiding an
encoding-related bug from us, so let's carry it forward instead of
re-generating it with xgettext(1).
The "po/git.pot" file should have a header entry, because a proper
header entry will increase the speed of creating a new po file using
msginit and set a proper "POT-Creation-Date:" field in the header
entry of a "po/XX.po" file. We use xgettext to generate a separate
header file at ".build/pot/git.header" from "/dev/null", and use this
header to assemble "po/git.pot".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a built-in file system monitoring daemon that can be used by
the existing `fsmonitor` feature (protocol API and index extension)
to improve the performance of various Git commands, such as `status`.
The `fsmonitor--daemon` feature builds upon the `Simple IPC` API and
provides an alternative to hook access to existing fsmonitors such
as `watchman`.
This commit merely adds the new command without any functionality.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to enable hooks to be run as an external process, by a
standalone Git command, or by tools which wrap Git, provide an external
means to run all configured hook commands for a given hook event.
Most of our hooks require more complex functionality than this, but
let's start with the bare minimum required to support our simplest
hooks.
In terms of implementation the usage_with_options() and "goto usage"
pattern here mirrors that of
builtin/{commit-graph,multi-pack-index}.c.
Some of the implementation here, such as a function being named
run_hooks_opt() when it's tasked with running one hook, to using the
run_processes_parallel_tr2() API to run with jobs=1 is somewhere
between a bit odd and and an overkill for the current features of this
"hook run" command and the hook.[ch] API.
This code will eventually be able to run multiple hooks declared in
config in parallel, by starting out with these names and APIs we
reduce the later churn of renaming functions, switching from the
run_command() to run_processes_parallel_tr2() API etc.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
|
|
Prevent "make sparse" from running for the source files that
haven't been modified.
* ab/make-sparse-for-real:
Makefile: make the "sparse" target non-.PHONY
|
|
Make githooks(5) the source of truth for what hooks git supports, and
punt out early on hooks we don't know about in find_hook(). This
ensures that the documentation and the C code's idea about existing
hooks doesn't diverge.
We still have Perl and Python code running its own hooks, but that'll
be addressed by Emily Shaffer's upcoming "git hook run" command.
This resolves a long-standing TODO item in bugreport.c of there being
no centralized listing of hooks, and fixes a bug with the bugreport
listing only knowing about 1/4 of the p4 hooks. It didn't know about
the recent "reference-transaction" hook either.
We could make the find_hook() function die() or BUG() out if the new
known_hook() returned 0, but let's make it return NULL just as it does
when it can't find a hook of a known type. Making it die() is overly
anal, and unlikely to be what we need in catching stupid typos in the
name of some new hook hardcoded in git.git's sources. By making this
be tolerant of unknown hook names, changes in a later series to make
"git hook run" run arbitrary user-configured hook names will be easier
to implement.
I have not been able to directly test the CMake change being made
here. Since 4c2c38e800 (ci: modification of main.yml to use cmake for
vs-build job, 2020-06-26) some of the Windows CI has a hard dependency
on CMake, this change works there, and is to my eyes an obviously
correct use of a pattern established in previous CMake changes,
namely:
- 061c2240b1 (Introduce CMake support for configuring Git,
2020-06-12)
- 709df95b78 (help: move list_config_help to builtin/help,
2020-04-16)
- 976aaedca0 (msvc: add a Makefile target to pre-generate the Visual
Studio solution, 2019-07-29)
The LC_ALL=C is needed because at least in my locale the dash ("-") is
ignored for the purposes of sorting, which results in a different
order. I'm not aware of anything in git that has a hard dependency on
the order, but e.g. the bugreport output would end up using whatever
locale was in effect when git was compiled.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the "sparse" target and its *.sp dependencies to be
non-.PHONY. Before this change "make sparse" would take ~5s to re-run
all the *.c files through "cgcc", after it it'll create an empty *.sp
file sitting alongside the *.c file, only if the *.c file or its
dependencies are newer than the *.sp is the *.sp re-made.
We ensure that the recursive dependencies are correct by depending on
the *.o file, which in turn will have correct dependencies by either
depending on all header files, or under
"COMPUTE_HEADER_DEPENDENCIES=yes" the headers it needs.
This means that a plain "make sparse" is much slower, as we'll now
need to make the *.o files just to create the *.sp files, but
incrementally creating the *.sp files is *much* faster and less
verbose, it thus becomes viable to run "sparse" along with "all" as
e.g. "git rebase --exec 'make all sparse'".
On my box with -j8 "make sparse" was fast before, or around 5 seconds,
now it only takes that long the first time, and the common case is
<100ms, or however long it takes GNU make to stat the *.sp file and
see that all the corresponding *.c file and its dependencies are
older.
See 0bcd9ae85d7 (sparse: Fix errors due to missing target-specific
variables, 2011-04-21) for the modern implementation of the sparse
target being changed here.
It is critical that we use -Wsparse-error here, otherwise the error
would only show up once, but we'd successfully create the empty *.sp
file, and running a second time wouldn't show the error. I'm therefore
not putting it into SPARSE_FLAGS or SP_EXTRA_FLAGS, it's not optional,
the Makefile logic won't behave properly without it.
Appending to $@ without a move is OK here because we're using the
.DELETE_ON_ERROR Makefile feature. See 7b76d6bf221 (Makefile: add and
use the ".DELETE_ON_ERROR" flag, 2021-06-29). GNU make ensures that on
error this file will be removed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option was deprecated in favor of `--rebase-merges` some time ago,
and now we retire it.
To assist users to transition away, we do not _actually_ remove the
option, but now we no longer implement the functionality. Instead, we
offer a helpful error message suggesting which option to use.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git subtree" updates.
* ls/subtree: (30 commits)
subtree: be stricter about validating flags
subtree: push: allow specifying a local rev other than HEAD
subtree: allow 'split' flags to be passed to 'push'
subtree: allow --squash to be used with --rejoin
subtree: give the docs a once-over
subtree: have $indent actually affect indentation
subtree: don't let debug and progress output clash
subtree: add comments and sanity checks
subtree: remove duplicate check
subtree: parse revs in individual cmd_ functions
subtree: use "^{commit}" instead of "^0"
subtree: don't fuss with PATH
subtree: use "$*" instead of "$@" as appropriate
subtree: use more explicit variable names for cmdline args
subtree: use git-sh-setup's `say`
subtree: use `git merge-base --is-ancestor`
subtree: drop support for git < 1.7
subtree: more consistent error propagation
subtree: don't have loose code outside of a function
subtree: t7900: add porcelain tests for 'pull' and 'push'
...
|
|
Running `make -C contrib/subtree/ test` creates a `git-subtree` executable
in the root of the repo. Add it to the .gitignore so that anyone hacking
on subtree won't have to deal with that noise.
Signed-off-by: Luke Shumaker <lukeshu@datawire.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use multiple worker processes to distribute the queued entries and call
write_pc_item() in parallel for them. The items are distributed
uniformly in contiguous chunks. This minimizes the chances of two
workers writing to the same directory simultaneously, which could affect
performance due to lock contention in the kernel. Work stealing (or any
other format of re-distribution) is not implemented yet.
The protocol between the main process and the workers is quite simple.
They exchange binary messages packed in pkt-line format, and use
PKT-FLUSH to mark the end of input (from both sides). The main process
starts the communication by sending N pkt-lines, each corresponding to
an item that needs to be written. These packets contain all the
necessary information to load, smudge, and write the blob associated
with each item. Then it waits for the worker to send back N pkt-lines
containing the results for each item. The resulting packet must contain:
the identification number of the item that it refers to, the status of
the operation, and the lstat() data gathered after writing the file (iff
the operation was successful).
For now, checkout always uses a hardcoded value of 2 workers, only to
demonstrate that the parallel checkout framework correctly divides and
writes the queued entries. The next patch will add user configurations
and define a more reasonable default, based on tests with the said
settings.
Co-authored-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Co-authored-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Random cleanup.
* fc/random-cleanup:
gitignore: remove entry for git serve
gitignore: drop duplicate entry for git-sh-i18n
tests: lib-functions: trivial style cleanups
test: completion: fix typos
.gitignore: remove dangling file
refspec: trivial cleanup
|
|
"git-parse-remote" shell script library outlived its usefulness.
* ab/retire-parse-remote:
submodule: fix fetch_in_submodule logic
parse-remote: remove this now-unused library
submodule: remove sh function in favor of helper
submodule: use "fetch" logic instead of custom remote discovery
|
|
b7ce24d095 (Turn `git serve` into a test helper, 2019-04-18) demoted git
serve from a builtin command to a test helper. As a result the
git-serve binary is no longer built and thus doesn't have to be ignored
anymore.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This was accidentally added by e00cf070a4 (git-sh-i18n.sh: add no-op
gettext() and eval_gettext() wrappers, 2011-05-14), even though an
earlier commit in the same series had already done so.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The library was removed 7 years ago on commit ae34ac126f. But not from
the .gitignore file.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Parts of "git maintenance" to ease writing crontab entries (and
other scheduling system configuration) for it.
* ds/maintenance-part-3:
maintenance: add troubleshooting guide to docs
maintenance: use 'incremental' strategy by default
maintenance: create maintenance.strategy config
maintenance: add start/stop subcommands
maintenance: add [un]register subcommands
for-each-repo: run subcommands on configured repos
maintenance: add --schedule option and config
maintenance: optionally skip --auto process
|
|
The previous two commits removed the last use of a function in this
library, but most of it had been dead code for a while[1][2]. Only the
"get_default_remote" function was still being used.
Even though we had a manual page for this library it was never
intended (or I expect, actually) used outside of git.git. Let's just
remove it, if anyone still cares about a function here they can pull
them into their own project[3].
1. Last use of error_on_missing_default_upstream():
d03ebd411c ("rebase: remove the rebase.useBuiltin setting",
2019-03-18)
2. Last use of get_remote_merge_branch(): 49eb8d39c7 ("Remove
contrib/examples/*", 2018-03-25)
3. https://lore.kernel.org/git/87a6vmhdka.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the CMake support we added some time ago for real with Visual
Studio build revealed there were lot of usability improvements
possible, which have been carried out.
* js/cmake-vs:
hashmap_for_each_entry(): workaround MSVC's runtime check failure #3
cmake (Windows): recommend using Visual Studio's built-in CMake support
cmake (Windows): initialize vcpkg/build dependencies automatically
cmake (Windows): complain when encountering an unknown compiler
cmake (Windows): let the `.dll` files be found when running the tests
cmake: quote the path accurately when editing `test-lib.sh`
cmake: fall back to using `vcpkg`'s `msgfmt.exe` on Windows
cmake: ensure that the `vcpkg` packages are found on Windows
cmake: do find Git for Windows' shell interpreter
cmake: ignore files generated by CMake as run in Visual Studio
|
|
A "git gc"'s big brother has been introduced to take care of more
repository maintenance tasks, not limited to the object database
cleaning.
* ds/maintenance-part-1:
maintenance: add trace2 regions for task execution
maintenance: add auto condition for commit-graph task
maintenance: use pointers to check --auto
maintenance: create maintenance.<task>.enabled config
maintenance: take a lock on the objects directory
maintenance: add --task option
maintenance: add commit-graph task
maintenance: initialize task array
maintenance: replace run_auto_gc()
maintenance: add --quiet option
maintenance: create basic maintenance runner
|
|
It can be helpful to store a list of repositories in global or system
config and then iterate Git commands on that list. Create a new builtin
that makes this process simple for experts. We will use this builtin to
run scheduled maintenance on all configured repositories in a future
change.
The test is very simple, but does highlight that the "--" argument is
optional.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As of recent Visual Studio versions, CMake support is built-in:
https://docs.microsoft.com/en-us/cpp/build/cmake-projects-in-visual-studio?view=vs-2019
All that needs to be done is to open the worktree as a folder, and
Visual Studio will find the `CMakeLists.txt` file and automatically
generate the project files.
Let's ignore the entirety of those generated files.
Helped-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Developer support.
* pb/clang-json-compilation-database:
Makefile: add support for generating JSON compilation database
|
|
The 'gc' builtin is our current entrypoint for automatically maintaining
a repository. This one tool does many operations, such as repacking the
repository, packing refs, and rewriting the commit-graph file. The name
implies it performs "garbage collection" which means several different
things, and some users may not want to use this operation that rewrites
the entire object database.
Create a new 'maintenance' builtin that will become a more general-
purpose command. To start, it will only support the 'run' subcommand,
but will later expand to add subcommands for scheduling maintenance in
the background.
For now, the 'maintenance' builtin is a thin shim over the 'gc' builtin.
In fact, the only option is the '--auto' toggle, which is handed
directly to the 'gc' builtin. The current change is isolated to this
simple operation to prevent more interesting logic from being lost in
all of the boilerplate of adding a new builtin.
Use existing builtin/gc.c file because we want to share code between the
two builtins. It is possible that we will have 'maintenance' replace the
'gc' builtin entirely at some point, leaving 'git gc' as an alias for
some specific arguments to 'git maintenance run'.
Create a new test_subcommand helper that allows us to test if a certain
subcommand was run. It requires storing the GIT_TRACE2_EVENT logs in a
file. A negation mode is available that will be used in later tests.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tools based on LibClang [1] can make use of a 'JSON Compilation
Database' [2] that keeps track of the exact options used to compile a set
of source files.
For example, clangd [3], which is a C language server protocol
implementation, can use a JSON compilation database to determine the
flags needed to compile a file so it can provide proper editor
integration. As a result, editors supporting the language server
protocol (such as VS Code, Emacs, or Vim, with suitable plugins) can
provide better searching, integration, and refactoring tools.
The Clang compiler can generate JSON fragments when compiling [4],
using the `-MJ` flag. These JSON fragments (one per compiled source
file) can then be concatenated to create the compilation database,
commonly called 'compile_commands.json'.
Add support to the Makefile for generating these JSON fragments as well
as the compilation database itself, if the environment variable
'GENERATE_COMPILATION_DATABASE' is set.
If this variable is set, check that $(CC) indeed supports the `-MJ`
flag, following what is done for automatic dependencies.
All JSON fragments are placed in the 'compile_commands/' directory, and
the compilation database 'compile_commands.json' is generated as a
dependency of the 'all' target using a `sed` invocation.
[1] https://clang.llvm.org/docs/Tooling.html
[2] https://clang.llvm.org/docs/JSONCompilationDatabase.html
[3] https://clangd.llvm.org/
[4] https://clang.llvm.org/docs/ClangCommandLineReference.html#cmdoption-clang-mj-arg
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code in vcs-svn was started in 2010 as an attempt to build a
remote-helper for interacting with svn repositories (as opposed to
git-svn). However, we never got as far as shipping a mature remote
helper, and the last substantive commit was e99d012a6bc in 2012.
We do have a git-remote-testsvn, and it is even installed as part of
"make install". But given the name, it seems unlikely to be used by
anybody (you'd have to explicitly "git clone testsvn::$url", and there
have been zero mentions of that on the mailing list since 2013, and even
that includes the phrase "you might need to hack a bit to get it working
properly"[1]).
We also ship contrib/svn-fe, which builds on the vcs-svn work. However,
it does not seem to build out of the box for me, as the link step misses
some required libraries for using libgit.a. Curiously, the original
build breakage bisects for me to eff80a9fd9 (Allow custom "comment
char", 2013-01-16), which seems unrelated. There was an attempt to fix
it in da011cb0e7 (contrib/svn-fe: fix Makefile, 2014-08-28), but on my
system that only switches the error message.
So it seems like the result is not really usable by anybody in practice.
It would be wonderful if somebody wanted to pick up the topic again, and
potentially it's worth carrying around for that reason. But the flip
side is that people doing tree-wide operations have to deal with this
code. And you can see the list with (replace "HEAD" with this commit as
appropriate):
{
echo "--"
git diff-tree --diff-filter=D -r --name-only HEAD^ HEAD
} |
git log --no-merges --oneline e99d012a6bc.. --stdin
which shows 58 times somebody had to deal with the code, generally due
to a compile or test failure, or a tree-wide style fix or API change.
Let's drop it and let anybody who wants to pick it up do so by
resurrecting it from the git history.
As a bonus, this also reduces the size of a stripped installation of Git
from 21MB to 19MB.
[1] https://lore.kernel.org/git/CALkWK0mPHzKfzFKKpZkfAus3YVC9NFYDbFnt+5JQYVKipk3bQQ@mail.gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "bugreport" tool.
* es/bugreport:
bugreport: drop extraneous includes
bugreport: add compiler info
bugreport: add uname info
bugreport: gather git version and build info
bugreport: add tool to generate debugging info
help: move list_config_help to builtin/help
|
|
Teach Git how to prompt the user for a good bug report: reproduction
steps, expected behavior, and actual behavior. Later, Git can learn how
to collect some diagnostic information from the repository.
If users can send us a well-written bug report which contains diagnostic
information we would otherwise need to ask the user for, we can reduce
the number of question-and-answer round trips between the reporter and
the Git contributor.
Users may also wish to send a report like this to their local "Git
expert" if they have put their repository into a state they are confused
by.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Starting in 3ac68a93fd2, help.o began to depend on builtin/branch.o,
builtin/clean.o, and builtin/config.o. This meant that help.o was
unusable outside of the context of the main Git executable.
To make help.o usable by other commands again, move list_config_help()
into builtin/help.c (where it makes sense to assume other builtin libraries
are present).
When command-list.h is included but a member is not used, we start to
hear a compiler warning. Since the config list is generated in a fairly
different way than the command list, and since commands and config
options are semantically different, move the config list into its own
header and move the generator into its own script and build rule.
For reasons explained in 976aaedc (msvc: add a Makefile target to
pre-generate the Visual Studio solution, 2019-07-29), some build
artifacts we consider non-source files cannot be generated in the
Visual Studio environment, and we already have some Makefile tweaks
to help Visual Studio to use generated command-list.h header file.
Do the same to a new generated file, config-list.h, introduced by
this change.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
|
|
Remove the stash.useBuiltin setting which was added as an escape hatch
to disable the builtin version of stash first released with Git 2.22.
Carrying the legacy version is a maintenance burden, and has in fact
become out of date failing a test since the 2.23 release, without
anyone noticing until now. So users would be getting a hint to fall
back to a potentially buggy version of the tool.
We used to shell out to git config to get the useBuiltin configuration
to avoid changing any global state before spawning legacy-stash.
However that is no longer necessary, so just use the 'git_config'
function to get the setting instead.
Similar to what we've done in d03ebd411c ("rebase: remove the
rebase.useBuiltin setting", 2019-03-18), where we remove the
corresponding setting for rebase, we leave the documentation in place,
so people can refer back to it when searching for it online, and so we
can refer to it in the commit message.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse-checkout feature is mostly hidden to users, as its
only documentation is supplementary information in the docs for
'git read-tree'. In addition, users need to know how to edit the
.git/info/sparse-checkout file with the right patterns, then run
the appropriate 'git read-tree -mu HEAD' command. Keeping the
working directory in sync with the sparse-checkout file requires
care.
Begin an effort to make the sparse-checkout feature a porcelain
feature by creating a new 'git sparse-checkout' builtin. This
builtin will be the preferred mechanism for manipulating the
sparse-checkout file and syncing the working directory.
The documentation provided is adapted from the "git read-tree"
documentation with a few edits for clarity in the new context.
Extra sections are added to hint toward a future change to
a more restricted pattern set.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dev support.
* dl/honor-cflags-in-hdr-check:
ci: run `hdr-check` as part of the `Static Analysis` job
Makefile: emulate compile in $(HCO) target better
pack-bitmap.h: remove magic number
promisor-remote.h: include missing header
apply.h: include missing header
|
|
Adjust .gitignore to unignore a path that we started to track.
* js/visual-studio:
.gitignore: stop ignoring `.manifest` files
|
|
Currently, when testing headers using `make hdr-check`, headers are
directly compiled. Although this seems to test the headers, this is too
strict since we treat the headers as C sources. As a result, this will
cause warnings to appear that would otherwise not, such as a static
variable definition intended for later use throwing a unused variable
warning.
In addition, on platforms that can run `make hdr-check` but require
custom flags, this target was failing because none of them were being
passed to the compiler. For example, on MacOS, the NO_OPENSSL flag was
being set but it was not being passed into compiler so the check was
failing.
Fix these problems by emulating the compile process better, including
test compiling dummy *.hcc C sources generated from the *.h files and
passing $(ALL_CFLAGS) into the compiler for the $(HCO) target so that
these custom flags can be used.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, it is possible to embed additional metadata into an
executable by linking in a "manifest", i.e. an XML document that
describes capabilities and requirements (such as minimum or maximum
Windows version). These XML documents are expected to be stored in
`.manifest` files.
At least _some_ Visual Studio versions auto-generate `.manifest` files
when none is specified explicitly, therefore we used to ask Git to
ignore them.
However, we do have a beautiful `.manifest` file now:
`compat/win32/git.manifest`, so neither does Visual Studio auto-generate
a manifest for us, nor do we want Git to ignore the `.manifest` files
anymore.
Further reading on auto-generated `.manifest` files:
https://docs.microsoft.com/en-us/cpp/build/manifest-generation-in-visual-studio
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Support building Git with Visual Studio
The bits about .git/branches/* have been dropped from the series.
We may want to drop the support for it, but until that happens, the
tests should rely on the existence of the support to pass.
* js/visual-studio: (23 commits)
git: avoid calling aliased builtins via their dashed form
bin-wrappers: append `.exe` to target paths if necessary
.gitignore: ignore Visual Studio's temporary/generated files
.gitignore: touch up the entries regarding Visual Studio
vcxproj: also link-or-copy builtins
msvc: add a Makefile target to pre-generate the Visual Studio solution
contrib/buildsystems: add a backend for modern Visual Studio versions
contrib/buildsystems: handle options starting with a slash
contrib/buildsystems: also handle -lexpat
contrib/buildsystems: handle libiconv, too
contrib/buildsystems: handle the curl library option
contrib/buildsystems: error out on unknown option
contrib/buildsystems: optionally capture the dry-run in a file
contrib/buildsystems: redirect errors of the dry run into a log file
contrib/buildsystems: ignore gettext stuff
contrib/buildsystems: handle quoted spaces in filenames
contrib/buildsystems: fix misleading error message
contrib/buildsystems: ignore irrelevant files in Generators/
contrib/buildsystems: ignore invalidcontinue.obj
Vcproj.pm: urlencode '<' and '>' when generating VC projects
...
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the Microsoft .manifest pattern, and do not anchor the 'Debug'
and 'Release' entries at the top-level directory, to allow for
multiple projects (one per target).
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many GIT_TEST_* environment variables control various aspects of
how our tests are run, but a few followed "non-empty is true, empty
or unset is false" while others followed the usual "there are a few
ways to spell true, like yes, on, etc., and also ways to spell
false, like no, off, etc." convention.
* ab/test-env:
env--helper: mark a file-local symbol as static
tests: make GIT_TEST_FAIL_PREREQS a boolean
tests: replace test_tristate with "git env--helper"
tests README: re-flow a previously changed paragraph
tests: make GIT_TEST_GETTEXT_POISON a boolean
t6040 test: stop using global "script" variable
config.c: refactor die_bad_number() to not call gettext() early
env--helper: new undocumented builtin wrapping git_env_*()
config tests: simplify include cycle test
|
|
Support to build with MSVC has been updated.
* jh/msvc:
msvc: ignore .dll and incremental compile output
msvc: avoid debug assertion windows in Debug Mode
msvc: do not pretend to support all signals
msvc: add pragmas for common warnings
msvc: add a compile-time flag to allow detailed heap debugging
msvc: support building Git using MS Visual C++
msvc: update Makefile to allow for spaces in the compiler path
msvc: fix detect_msys_tty()
msvc: define ftello()
msvc: do not re-declare the timespec struct
msvc: mark a variable as non-const
msvc: define O_ACCMODE
msvc: include sigset_t definition
msvc: fix dependencies of compat/msvc.c
mingw: replace mingw_startup() hack
obstack: fix compiler warning
cache-tree/blame: avoid reusing the DEBUG constant
t0001 (mingw): do not expect a specific order of stdout/stderr
Mark .bat files as requiring CR/LF endings
mingw: fix a typo in the msysGit-specific section
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
Ignore .dll files copied into the top-level directory.
Ignore MSVC incremental compiler output files.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|