path: root/mono/utils/mono-threads.c

/**
 * \file
 * Low-level threading
 *
 * Author:
 *	Rodrigo Kumpera (kumpera@gmail.com)
 *
 * Copyright 2011 Novell, Inc (http://www.novell.com)
 * Copyright 2011 Xamarin, Inc (http://www.xamarin.com)
 * Licensed under the MIT license. See LICENSE file in the project root for full license information.
 */

#include <config.h>

/* enable pthread extensions */
#ifdef TARGET_MACH
#define _DARWIN_C_SOURCE
#endif

#include <mono/utils/mono-compiler.h>
#include <mono/utils/mono-os-semaphore.h>
#include <mono/utils/mono-threads.h>
#include <mono/utils/mono-tls.h>
#include <mono/utils/hazard-pointer.h>
#include <mono/utils/mono-memory-model.h>
#include <mono/utils/mono-mmap.h>
#include <mono/utils/atomic.h>
#include <mono/utils/mono-time.h>
#include <mono/utils/mono-lazy-init.h>
#include <mono/utils/mono-coop-mutex.h>
#include <mono/utils/mono-coop-semaphore.h>
#include <mono/utils/mono-threads-coop.h>
#include <mono/utils/mono-threads-debug.h>
#include <mono/utils/os-event.h>
#include <mono/utils/w32api.h>
#include <glib.h>

#include <errno.h>
#include <mono/utils/mono-errno.h>

#if defined(__MACH__)
#include <mono/utils/mach-support.h>
#endif

#if _MSC_VER
#pragma warning(disable:4312) // FIXME pointer cast to different size
#endif

/*
Mutex that makes sure only a single thread can be suspending others.
Suspend is a very racy operation since it requires restarting until
the target thread is not on an unsafe region.

We could implement this using critical regions, but would be much much
harder for an operation that is hardly performance critical.

The GC has to acquire this lock before starting a STW to make sure
a runtime suspend won't make it wronly see a thread in a safepoint
when it is in fact not.

This has to be a naked locking primitive, and not a coop aware one, as
it needs to be usable when destroying thread_info_key, the TLS key for
the current MonoThreadInfo. In this case, mono_thread_info_current_unchecked,
(which is used inside MONO_ENTER_GC_SAFE), would return NULL, leading
to an assertion error. We then simply switch state manually in
mono_thread_info_suspend_lock_with_info.
*/
static MonoSemType global_suspend_semaphore;

static size_t thread_info_size;
static MonoThreadInfoCallbacks threads_callbacks;
const MonoThreadInfoRuntimeCallbacks *mono_runtime_callbacks;
static MonoNativeTlsKey thread_info_key, thread_exited_key;
#ifdef MONO_KEYWORD_THREAD
static MONO_KEYWORD_THREAD gint32 tls_small_id = -1;
#else
static MonoNativeTlsKey small_id_key;
#endif
static MonoLinkedListSet thread_list;
static gboolean mono_threads_inited = FALSE;

static MonoSemType suspend_semaphore;
static size_t pending_suspends;

static mono_mutex_t join_mutex;

#define mono_thread_info_run_state(info) (((MonoThreadInfo*)info)->thread_state.state)

/*warn at 50 ms*/
#define SLEEP_DURATION_BEFORE_WARNING (50)
/*never aborts */
#define SLEEP_DURATION_BEFORE_ABORT MONO_INFINITE_WAIT

static guint32 sleepWarnDuration = SLEEP_DURATION_BEFORE_WARNING,
	    sleepAbortDuration = SLEEP_DURATION_BEFORE_ABORT;

static int suspend_posts, resume_posts, abort_posts, waits_done, pending_ops;

void
mono_threads_notify_initiator_of_abort (MonoThreadInfo* info)
{
	THREADS_SUSPEND_DEBUG ("[INITIATOR-NOTIFY-ABORT] %p\n", mono_thread_info_get_tid (info));
	mono_atomic_inc_i32 (&abort_posts);
	mono_os_sem_post (&suspend_semaphore);
}

void
mono_threads_notify_initiator_of_suspend (MonoThreadInfo* info)
{
	THREADS_SUSPEND_DEBUG ("[INITIATOR-NOTIFY-SUSPEND] %p\n", mono_thread_info_get_tid (info));
	// check that the thread is really in a valid suspended state.
	g_assert (mono_thread_info_get_suspend_state (info) != NULL);
	mono_atomic_inc_i32 (&suspend_posts);
	mono_os_sem_post (&suspend_semaphore);
}

void
mono_threads_notify_initiator_of_resume (MonoThreadInfo* info)
{
	THREADS_SUSPEND_DEBUG ("[INITIATOR-NOTIFY-RESUME] %p\n", mono_thread_info_get_tid (info));
	mono_atomic_inc_i32 (&resume_posts);
	mono_os_sem_post (&suspend_semaphore);
}

typedef enum {
	BeginSuspendFail = 0,
	BeginSuspendOkPreemptive = 1,
	BeginSuspendOkCooperative = 2,
	BeginSuspendOkNoWait = 3,
} BeginSuspendResult;

static BeginSuspendResult
begin_cooperative_suspend (MonoThreadInfo *info)
{
	/* There's nothing else to do after we async request the thread to suspend */
	mono_threads_add_to_pending_operation_set (info);
	return BeginSuspendOkCooperative;
}

static BeginSuspendResult
begin_preemptive_suspend (MonoThreadInfo *info, gboolean interrupt_kernel)
{
	if (mono_threads_suspend_begin_async_suspend (info, interrupt_kernel))
		return BeginSuspendOkPreemptive;
	else
		return BeginSuspendFail;
}

static BeginSuspendResult
begin_suspend_for_running_thread (MonoThreadInfo *info, gboolean interrupt_kernel)
{
	/* If we're using full cooperative suspend or hybrid suspend,
	 * cooperatively suspend RUNNING threads */
	if (mono_threads_are_safepoints_enabled ())
		return begin_cooperative_suspend (info);
	else
		return begin_preemptive_suspend (info, interrupt_kernel);
}

static gboolean
thread_is_cooperative_suspend_aware (MonoThreadInfo *info)
{
	return (mono_threads_is_cooperative_suspension_enabled () || mono_atomic_load_i32 (&(info->coop_aware_thread)));
}

static BeginSuspendResult
begin_suspend_for_blocking_thread (MonoThreadInfo *info, gboolean interrupt_kernel, MonoThreadSuspendPhase phase, gboolean coop_aware_thread, gboolean *did_interrupt)
{
	// if a thread can't transition to blocking, we certainly shouldn't be
	// trying to suspend it like it's blocking.
	g_assert (mono_threads_is_blocking_transition_enabled ());
	// with hybrid suspend, preemptively suspend blocking threads (if thread is not coop aware),
	// otherwise blocking already counts as suspended.
	if (mono_threads_is_hybrid_suspension_enabled () && !coop_aware_thread) {
		if (did_interrupt) {
			*did_interrupt = interrupt_kernel;
		}
		switch (phase) {
		case MONO_THREAD_SUSPEND_PHASE_INITIAL:
			/* In hybrid suspend, in the first phase, a thread in
			 * blocking can continue running (and possibly
			 * self-suspend).  We'll preemptively suspend it in the
			 * second phase, if thread is not coop aware. */
			return BeginSuspendOkNoWait;
		case MONO_THREAD_SUSPEND_PHASE_MOPUP:
			return begin_preemptive_suspend (info, interrupt_kernel);
		default:
			g_assert_not_reached ();
		}
	} else {
		if (did_interrupt)
			*did_interrupt = FALSE;
		// In full cooperative suspend, treat a thread in BLOCKING as
		// already suspended and don't wait for it.
		return BeginSuspendOkNoWait;
	}
}

static gboolean
check_async_suspend (MonoThreadInfo *info, BeginSuspendResult result)
{
	switch (result) {
	case BeginSuspendOkCooperative:
		return TRUE;
	case BeginSuspendOkPreemptive:
		return mono_threads_suspend_check_suspend_result (info);
	case BeginSuspendFail:
		return FALSE;
	case BeginSuspendOkNoWait:
		return TRUE;
	default:
		g_assert_not_reached ();
	}
}

static void
resume_async_suspended (MonoThreadInfo *info)
{
	if (mono_threads_is_cooperative_suspension_enabled () && !mono_threads_is_hybrid_suspension_enabled ())
		g_assert_not_reached ();

	g_assert (mono_threads_suspend_begin_async_resume (info));
}

static void
resume_self_suspended (MonoThreadInfo* info)
{
	THREADS_SUSPEND_DEBUG ("**BEGIN self-resume %p\n", mono_thread_info_get_tid (info));
	mono_os_sem_post (&info->resume_semaphore);
}

void
mono_thread_info_wait_for_resume (MonoThreadInfo* info)
{
	int res;
	THREADS_SUSPEND_DEBUG ("**WAIT self-resume %p\n", mono_thread_info_get_tid (info));
	res = mono_os_sem_wait (&info->resume_semaphore, MONO_SEM_FLAGS_NONE);
	g_assert (res != -1);
}

static void
resume_blocking_suspended (MonoThreadInfo* info)
{
	THREADS_SUSPEND_DEBUG ("**BEGIN blocking-resume %p\n", mono_thread_info_get_tid (info));
	mono_os_sem_post (&info->resume_semaphore);
}

void
mono_threads_add_to_pending_operation_set (MonoThreadInfo* info)
{
	THREADS_SUSPEND_DEBUG ("added %p to pending suspend\n", mono_thread_info_get_tid (info));
	++pending_suspends;
	mono_atomic_inc_i32 (&pending_ops);
}

void
mono_threads_begin_global_suspend (void)
{
	size_t ps = pending_suspends;
	if (G_UNLIKELY (ps != 0))
		g_error ("pending_suspends = %d, but must be 0", ps);
	THREADS_SUSPEND_DEBUG ("------ BEGIN GLOBAL OP sp %d rp %d ap %d wd %d po %d (sp + rp + ap == wd) (wd == po)\n", suspend_posts, resume_posts,
		abort_posts, waits_done, pending_ops);
	g_assert ((suspend_posts + resume_posts + abort_posts) == waits_done);
	mono_threads_coop_begin_global_suspend ();
}

void
mono_threads_end_global_suspend (void) 
{
	size_t ps = pending_suspends;
	if (G_UNLIKELY (ps != 0))
		g_error ("pending_suspends = %d, but must be 0", ps);
	THREADS_SUSPEND_DEBUG ("------ END GLOBAL OP sp %d rp %d ap %d wd %d po %d\n", suspend_posts, resume_posts,
		abort_posts, waits_done, pending_ops);
	g_assert ((suspend_posts + resume_posts + abort_posts) == waits_done);
	mono_threads_coop_end_global_suspend ();
}

static void
dump_threads (void)
{
	MonoThreadInfo *cur = mono_thread_info_current ();

	g_async_safe_printf ("STATE CUE CARD: (? means a positive number, usually 1 or 2, * means any number)\n");
	g_async_safe_printf ("\t0x0\t- starting (GOOD, unless the thread is running managed code)\n");
	g_async_safe_printf ("\t0x1\t- detached (GOOD, unless the thread is running managed code)\n");
	g_async_safe_printf ("\t0x2\t- running (BAD, unless it's the gc thread)\n");
	g_async_safe_printf ("\t0x?03\t- async suspended (GOOD)\n");
	g_async_safe_printf ("\t0x?04\t- self suspended (GOOD)\n");
	g_async_safe_printf ("\t0x?05\t- async suspend requested (BAD)\n");
	g_async_safe_printf ("\t0x6\t- blocking (BAD, unless there's no suspend initiator)\n");
	g_async_safe_printf ("\t0x?07\t- blocking async suspended (GOOD)\n");
	g_async_safe_printf ("\t0x?08\t- blocking self suspended (GOOD)\n");
	g_async_safe_printf ("\t0x?09\t- blocking suspend requested (BAD in coop; GOOD in hybrid)\n");

	FOREACH_THREAD_SAFE_ALL (info) {
#ifdef TARGET_MACH
		char thread_name [256] = { 0 };
		pthread_getname_np (mono_thread_info_get_tid (info), thread_name, 255);

		g_async_safe_printf ("--thread %p id %p [%p] (%s) state %x  %s\n", info, (void *) mono_thread_info_get_tid (info), (void*)(size_t)info->native_handle, thread_name, info->thread_state, info == cur ? "GC INITIATOR" : "" );
#else
		g_async_safe_printf ("--thread %p id %p [%p] state %x  %s\n", info, (void *) mono_thread_info_get_tid (info), (void*)(size_t)info->native_handle, info->thread_state, info == cur ? "GC INITIATOR" : "" );
#endif
	} FOREACH_THREAD_SAFE_END
}

gboolean
mono_threads_wait_pending_operations (void)
{
	int i;
	int c = pending_suspends;

	/* Wait threads to park */
	THREADS_SUSPEND_DEBUG ("[INITIATOR-WAIT-COUNT] %d\n", c);
	if (pending_suspends) {
		MonoStopwatch suspension_time;
		mono_stopwatch_start (&suspension_time);
		for (i = 0; i < pending_suspends; ++i) {
			THREADS_SUSPEND_DEBUG ("[INITIATOR-WAIT-WAITING]\n");
			mono_atomic_inc_i32 (&waits_done);
			if (mono_os_sem_timedwait (&suspend_semaphore, sleepAbortDuration, MONO_SEM_FLAGS_NONE) == MONO_SEM_TIMEDWAIT_RET_SUCCESS)
				continue;
			mono_stopwatch_stop (&suspension_time);

			dump_threads ();

			g_async_safe_printf ("WAITING for %d threads, got %d suspended\n", (int)pending_suspends, i);
			g_error ("suspend_thread suspend took %d ms, which is more than the allowed %d ms", (int)mono_stopwatch_elapsed_ms (&suspension_time), sleepAbortDuration);
		}
		mono_stopwatch_stop (&suspension_time);
		THREADS_SUSPEND_DEBUG ("Suspending %d threads took %d ms.\n", (int)pending_suspends, (int)mono_stopwatch_elapsed_ms (&suspension_time));

	}

	pending_suspends = 0;

	return c > 0;
}


//Thread initialization code

static void
mono_hazard_pointer_clear_all (MonoThreadHazardPointers *hp, int retain)
{
	if (retain != 0)
		mono_hazard_pointer_clear (hp, 0);
	if (retain != 1)
		mono_hazard_pointer_clear (hp, 1);
	if (retain != 2)
		mono_hazard_pointer_clear (hp, 2);
}

/*
If return non null Hazard Pointer 1 holds the return value.
*/
MonoThreadInfo*
mono_thread_info_lookup (MonoNativeThreadId id)
{
	MonoThreadHazardPointers *hp = mono_hazard_pointer_get ();

	if (!mono_lls_find (&thread_list, hp, (uintptr_t)id)) {
		mono_hazard_pointer_clear_all (hp, -1);
		return NULL;
	} 

	mono_hazard_pointer_clear_all (hp, 1);
	return (MonoThreadInfo *) mono_hazard_pointer_get_val (hp, 1);
}

static gboolean
mono_thread_info_insert (MonoThreadInfo *info)
{
	MonoThreadHazardPointers *hp = mono_hazard_pointer_get ();

	if (!mono_lls_insert (&thread_list, hp, (MonoLinkedListSetNode*)info)) {
		mono_hazard_pointer_clear_all (hp, -1);
		return FALSE;
	} 

	mono_hazard_pointer_clear_all (hp, -1);
	return TRUE;
}

static gboolean
mono_thread_info_remove (MonoThreadInfo *info)
{
	MonoThreadHazardPointers *hp = mono_hazard_pointer_get ();
	gboolean res;

	THREADS_DEBUG ("removing info %p\n", info);
	res = mono_lls_remove (&thread_list, hp, (MonoLinkedListSetNode*)info);
	mono_hazard_pointer_clear_all (hp, -1);
	return res;
}

static void
free_thread_info (gpointer mem)
{
	MonoThreadInfo *info = (MonoThreadInfo *) mem;

	mono_os_sem_destroy (&info->resume_semaphore);
	mono_threads_suspend_free (info);

	g_free (info);
}

/*
 * mono_thread_info_register_small_id
 *
 * Registers a small ID for the current thread. This is a 16-bit value uniquely
 * identifying the current thread. If the current thread already has a small ID
 * assigned, that small ID will be returned; otherwise, the newly assigned small
 * ID is returned.
 */
int
mono_thread_info_register_small_id (void)
{
	int small_id = mono_thread_info_get_small_id ();

	if (small_id != -1)
		return small_id;

	small_id = mono_thread_small_id_alloc ();
#ifdef MONO_KEYWORD_THREAD
	tls_small_id = small_id;
#else
	mono_native_tls_set_value (small_id_key, GUINT_TO_POINTER (small_id + 1));
#endif
	return small_id;
}

static void
thread_handle_destroy (gpointer data)
{
	MonoThreadHandle *thread_handle;

	thread_handle = (MonoThreadHandle*) data;

	mono_os_event_destroy (&thread_handle->event);
	g_free (thread_handle);
}

static gboolean native_thread_id_main_thread_known;
static MonoNativeThreadId native_thread_id_main_thread;

/**
 * mono_native_thread_id_main_thread_known:
 *
 * If the main thread of the process has interacted with Mono (in the sense
 * that it has a MonoThreadInfo associated with it), return \c TRUE and write
 * its MonoNativeThreadId to \c main_thread_tid.
 *
 * Otherwise return \c FALSE.
 */
gboolean
mono_native_thread_id_main_thread_known (MonoNativeThreadId *main_thread_tid)
{
	if (!native_thread_id_main_thread_known)
		return FALSE;
	g_assert (main_thread_tid);
	*main_thread_tid = native_thread_id_main_thread;
	return TRUE;
}

/*
 * Saves the MonoNativeThreadId (on Linux pthread_t) of the current thread if
 * it is the main thread.
 *
 * The main thread is (on Linux) the one whose OS thread id (on Linux pid_t) is
 * equal to the process id.
 *
 * We have to do this at thread registration time because in embedding
 * scenarios we can't count on the main thread to be the one that calls
 * mono_jit_init, or other runtime initialization functions.
 */
static void
native_thread_set_main_thread (void)
{
	if (native_thread_id_main_thread_known)
		return;
#if defined(__linux__)
	if (mono_native_thread_os_id_get () == (guint64)getpid ()) {
		native_thread_id_main_thread = mono_native_thread_id_get ();
		mono_memory_barrier ();
		native_thread_id_main_thread_known = TRUE;
	}
#endif
}

static gboolean
register_thread (MonoThreadInfo *info)
{
	size_t stsize = 0;
	guint8 *staddr = NULL;
	gboolean result;

	info->small_id = mono_thread_info_register_small_id ();
	mono_thread_info_set_tid (info, mono_native_thread_id_get ());
	native_thread_set_main_thread ();

	info->handle = g_new0 (MonoThreadHandle, 1);
	mono_refcount_init (info->handle, thread_handle_destroy);
	mono_os_event_init (&info->handle->event, FALSE);

	mono_os_sem_init (&info->resume_semaphore, 0);

	/*set TLS early so SMR works */
	mono_native_tls_set_value (thread_info_key, info);

	mono_thread_info_get_stack_bounds (&staddr, &stsize);
	g_assert (staddr);
	g_assert (stsize);
	info->stack_start_limit = staddr;
	info->stack_end = staddr + stsize;
	info->stackdata = g_byte_array_new ();

	info->internal_thread_gchandle = NULL;

	info->profiler_signal_ack = 1;

#ifdef USE_WINDOWS_BACKEND
	info->windows_tib = (PNT_TIB)NtCurrentTeb ();
	info->win32_apc_info = 0;
	info->win32_apc_info_io_handle = INVALID_HANDLE_VALUE;
#endif

	mono_threads_suspend_register (info);

	THREADS_DEBUG ("registering info %p tid %p small id %x\n", info, mono_thread_info_get_tid (info), info->small_id);

	if (threads_callbacks.thread_attach) {
		if (!threads_callbacks.thread_attach (info)) {
			// g_warning ("thread registation failed\n");
			mono_native_tls_set_value (thread_info_key, NULL);
			return FALSE;
		}
	}

	/*
	Transition it before taking any locks or publishing itself to reduce the chance
	of others witnessing a detached thread.
	We can reasonably expect that until this thread gets published, no other thread will
	try to manipulate it.
	*/
	mono_threads_transition_attach (info);
	mono_thread_info_suspend_lock ();
	/*If this fail it means a given thread has been registered twice, which doesn't make sense. */
	result = mono_thread_info_insert (info);
	g_assert (result);
	mono_thread_info_suspend_unlock ();

	return TRUE;
}

static void
mono_thread_info_suspend_lock_with_info (MonoThreadInfo *info);

static void
mono_threads_signal_thread_handle (MonoThreadHandle* thread_handle);

static void
unregister_thread (void *arg)
{
	MONO_STACKDATA (gc_unsafe_stackdata);
	MonoThreadInfo *info;
	int small_id;
	gboolean result;
	MonoThreadHandle* handle;

	info = (MonoThreadInfo *) arg;
	g_assertf (info, ""); // f includes __func__
	g_assert (mono_thread_info_is_current (info));
	g_assert (mono_thread_info_is_live (info));

	/* We only enter the GC unsafe region, as when exiting this function, the thread
	 * will be detached, and the current MonoThreadInfo* will be destroyed. */
	mono_threads_enter_gc_unsafe_region_unbalanced_with_info (info, &gc_unsafe_stackdata);

	/* Need to be in GC Unsafe to pump the HP queue - some of the cleanup
	 * methods need to use coop-aware locks. For example: jit_info_table_free_duplicate.
	 */

	/* Pump the HP queue while the thread is alive.*/
	mono_thread_hazardous_try_free_some ();

	small_id = info->small_id;

	THREADS_DEBUG ("unregistering info %p\n", info);

	mono_native_tls_set_value (thread_exited_key, GUINT_TO_POINTER (1));

	/*
	 * TLS destruction order is not reliable so small_id might be cleaned up
	 * before us.
	 */
#ifndef MONO_KEYWORD_THREAD
	mono_native_tls_set_value (small_id_key, GUINT_TO_POINTER (info->small_id + 1));
#endif

	/* we need to duplicate it, as the info->handle is going
	 * to be closed when unregistering from the platform */
	handle = mono_threads_open_thread_handle (info->handle);

	/*
	First perform the callback that requires no locks.
	This callback has the potential of taking other locks, so we do it before.
	After it completes, the thread remains functional.
	*/
	if (threads_callbacks.thread_detach)
		threads_callbacks.thread_detach (info);

	mono_thread_info_suspend_lock_with_info (info);

	/*
	Now perform the callback that must be done under locks.
	This will render the thread useless and non-suspendable, so it must
	be done while holding the suspend lock to give no other thread chance
	to suspend it.
	*/
	if (threads_callbacks.thread_detach_with_lock)
		threads_callbacks.thread_detach_with_lock (info);

	/* The thread is no longer active, so unref its handle */
	mono_threads_close_thread_handle (info->handle);
	info->handle = NULL;

	result = mono_thread_info_remove (info);
	g_assert (result);
	mono_threads_transition_detach (info);

	mono_thread_info_suspend_unlock ();

	g_byte_array_free (info->stackdata, /*free_segment=*/TRUE);

	/*now it's safe to free the thread info.*/
	mono_thread_hazardous_try_free (info, free_thread_info);

	mono_thread_small_id_free (small_id);
	// clear the small_id thread local, in case this thread so that if it is reattached while running other TLS key dtors it will get a new small id
#ifdef MONO_KEYWORD_THREAD
	tls_small_id = -1;
#else
	mono_native_tls_set_value (small_id_key, NULL);
#endif

	mono_threads_signal_thread_handle (handle);

	mono_threads_close_thread_handle (handle);

	mono_native_tls_set_value (thread_info_key, NULL);
}

static void
thread_exited_dtor (void *arg)
{
#if defined(__MACH__)
	/*
	 * Since we use pthread dtors to clean up thread data, if a thread
	 * is attached to the runtime by another pthread dtor after our dtor
	 * has ran, it will never be detached, leading to various problems
	 * since the thread ids etc. will be reused while they are still in
	 * the threads hashtables etc.
	 * Dtors are called in a loop until all user tls entries are 0,
	 * but the loop has a maximum count (4), so if we set the tls
	 * variable every time, it will remain set when system tls dtors
	 * are ran. This allows mono_thread_info_is_exiting () to detect
	 * whenever the thread is exiting, even if it is executed from a
	 * system tls dtor (i.e. obj-c dealloc methods).
	 */
	mono_native_tls_set_value (thread_exited_key, GUINT_TO_POINTER (1));
#endif
}

MonoThreadInfo*
mono_thread_info_current_unchecked (void)
{
	return mono_threads_inited ? (MonoThreadInfo*)mono_native_tls_get_value (thread_info_key) : NULL;
}


MonoThreadInfo*
mono_thread_info_current (void)
{
	MonoThreadInfo *info = (MonoThreadInfo*)mono_native_tls_get_value (thread_info_key);
	if (info)
		return info;

	info = mono_thread_info_lookup (mono_native_thread_id_get ()); /*info on HP1*/

	/*
	We might be called during thread cleanup, but we cannot be called after cleanup as happened.
	The way to distinguish between before, during and after cleanup is the following:

	-If the TLS key is set, cleanup has not begun;
	-If the TLS key is clean, but the thread remains registered, cleanup is in progress;
	-If the thread is nowhere to be found, cleanup has finished.

	We cannot function after cleanup since there's no way to ensure what will happen.
	*/
	g_assertf (info, ""); // f includes __func__

	/*We're looking up the current thread which will not be freed until we finish running, so no need to keep it on a HP */
	mono_hazard_pointer_clear (mono_hazard_pointer_get (), 1);

	return info;
}

/*
 * mono_thread_info_get_small_id
 *
 * Retrieve the small ID for the current thread. This is a 16-bit value uniquely
 * identifying the current thread. Returns -1 if the current thread doesn't have
 * a small ID assigned.
 *
 * To ensure that the calling thread has a small ID assigned, call either
 * mono_thread_info_attach or mono_thread_info_register_small_id.
 */
int
mono_thread_info_get_small_id (void)
{
#ifdef MONO_KEYWORD_THREAD
	return tls_small_id;
#else
	gpointer val = mono_native_tls_get_value (small_id_key);
	if (!val)
		return -1;
	return GPOINTER_TO_INT (val) - 1;
#endif
}

MonoLinkedListSet*
mono_thread_info_list_head (void)
{
	return &thread_list;
}

MonoThreadInfo *
mono_thread_info_attach (void)
{
	MonoThreadInfo *info;

#ifdef HOST_WIN32
	if (!mono_threads_inited)
	{
		/* This can happen from DllMain(DLL_THREAD_ATTACH) on Windows, if a
		 * thread is created before an embedding API user initialized Mono. */
		THREADS_DEBUG ("mono_thread_info_attach called before mono_thread_info_init\n");
		return NULL;
	}
#endif

	g_assert (mono_threads_inited);

	info = (MonoThreadInfo *) mono_native_tls_get_value (thread_info_key);
	if (!info) {
		info = (MonoThreadInfo *) g_malloc0 (thread_info_size);
		THREADS_DEBUG ("attaching %p\n", info);
		if (!register_thread (info)) {
			g_free (info);
			return NULL;
		}
	}

	return info;
}

void
mono_thread_info_detach (void)
{
	MonoThreadInfo *info;

#ifdef HOST_WIN32
	if (!mono_threads_inited)
	{
		/* This can happen from DllMain(THREAD_DETACH) on Windows, if a thread
		 * is created before an embedding API user initialized Mono. */
		THREADS_DEBUG ("mono_thread_info_detach called before mono_thread_info_init\n");
		return;
	}
#endif

	g_assert (mono_threads_inited);

	info = (MonoThreadInfo *) mono_native_tls_get_value (thread_info_key);
	if (info) {
		THREADS_DEBUG ("detaching %p\n", info);
		unregister_thread (info);
	}
}

gboolean
mono_thread_info_try_get_internal_thread_gchandle (MonoThreadInfo *info, MonoGCHandle *gchandle)
{
	g_assertf (info, ""); // f includes __func__
	g_assert (mono_thread_info_is_current (info));

	if (info->internal_thread_gchandle == NULL)
		return FALSE;

	*gchandle = info->internal_thread_gchandle;
	return TRUE;
}

void
mono_thread_info_set_internal_thread_gchandle (MonoThreadInfo *info, MonoGCHandle gchandle)
{
	g_assertf (info, ""); // f includes __func__
	g_assert (mono_thread_info_is_current (info));
	info->internal_thread_gchandle = gchandle;
}

void
mono_thread_info_unset_internal_thread_gchandle (THREAD_INFO_TYPE *info)
{
	g_assertf (info, ""); // f includes __func__
	g_assert (mono_thread_info_is_current (info));
	info->internal_thread_gchandle = NULL;
}

/*
 * mono_thread_info_is_exiting:
 *
 *   Return whenever the current thread is exiting, i.e. it is running pthread
 * dtors.
 */
gboolean
mono_thread_info_is_exiting (void)
{
#if defined(__MACH__)
	if (mono_native_tls_get_value (thread_exited_key) == GUINT_TO_POINTER (1))
		return TRUE;
#endif
	return FALSE;
}

#ifndef HOST_WIN32
static void
thread_info_key_dtor (void *arg)
{
	/* Put the MonoThreadInfo back for the duration of the
	 * unregister code.  In some circumstances the thread needs to
	 * take the GC lock which may block which requires a coop
	 * state transition. */
	mono_native_tls_set_value (thread_info_key, arg);
	unregister_thread (arg);
	mono_native_tls_set_value (thread_info_key, NULL);
}
#endif

MonoThreadInfoFlags
mono_thread_info_get_flags (MonoThreadInfo *info)
{
    return (MonoThreadInfoFlags)mono_atomic_load_i32 (&info->flags);
}

void
mono_thread_info_set_flags (MonoThreadInfoFlags flags)
{
	MonoThreadInfo *info = mono_thread_info_current ();
	MonoThreadInfoFlags old = (MonoThreadInfoFlags)mono_atomic_load_i32 (&info->flags);

	if (threads_callbacks.thread_flags_changing)
		threads_callbacks.thread_flags_changing (old, flags);

	mono_atomic_store_i32 (&info->flags, flags);

	if (threads_callbacks.thread_flags_changed)
		threads_callbacks.thread_flags_changed (old, flags);
}

#define MONO_END_INIT_CB GINT_TO_POINTER(-1)
static GSList *init_callbacks;

void
mono_thread_info_wait_inited (void)
{
	MonoSemType cb;
	mono_os_sem_init (&cb, 0);
	GSList *old = init_callbacks;

	GSList wait_request;
	wait_request.data = &cb;
	wait_request.next = old;

	while (mono_threads_inited != TRUE) {
		GSList *old_read = (GSList*)mono_atomic_cas_ptr ((gpointer *) &init_callbacks, &wait_request, old);

		// Queued up waiter, need to be unstuck
		if (old_read == old) {
			break;
		} else if (old_read == GINT_TO_POINTER (MONO_END_INIT_CB)) {
			// Is inited
			return; 
		} else {
			// We raced with another writer
			wait_request.next = (GSList *) old_read;
			old = old_read;
		}
	}

	while (mono_threads_inited != TRUE) {
		gboolean timedout = mono_os_sem_timedwait (&cb, 1000, MONO_SEM_FLAGS_NONE) == MONO_SEM_TIMEDWAIT_RET_TIMEDOUT;
		if (!timedout)
			break;
	}

	g_assert (mono_threads_inited);
	return;
}

static void
mono_thread_info_set_inited (void)
{
	mono_threads_inited = TRUE;
	mono_memory_barrier ();

	GSList *old = init_callbacks;

	while (TRUE) {
		GSList* old_read = (GSList*)mono_atomic_cas_ptr ((gpointer *) &init_callbacks, MONO_END_INIT_CB, (gpointer) old);
		if (old == old_read)
			break;
		else
			old = old_read;
	}
	if (old == MONO_END_INIT_CB) {
		// Try not to use g_error / g_warning because this machinery used by logging
		// Don't want to loop back into it.
		fprintf (stderr, "Global threads inited twice");
		exit (1);
		return;
	}

	while (old != NULL) {
		GSList *curr = (GSList *) old;
		GSList *next = old->next;

		mono_os_sem_post ((MonoSemType*)curr->data);
		old = next;
	}

	return;
}

void
mono_thread_info_cleanup ()
{
	mono_native_tls_free (thread_info_key);
	mono_native_tls_free (thread_exited_key);
}

void
mono_thread_info_init (size_t info_size)
{
	gboolean res;
	thread_info_size = info_size;
	char *sleepLimit;

	mono_threads_suspend_policy_init ();

#ifdef HOST_WIN32
	res = mono_native_tls_alloc (&thread_info_key, NULL);
	res = mono_native_tls_alloc (&thread_exited_key, NULL);
#else
	res = mono_native_tls_alloc (&thread_info_key, (void *) thread_info_key_dtor);
	res = mono_native_tls_alloc (&thread_exited_key, (void *) thread_exited_dtor);
#endif

	g_assert (res);

#ifndef MONO_KEYWORD_THREAD
	res = mono_native_tls_alloc (&small_id_key, NULL);
#endif
	g_assert (res);

	if ((sleepLimit = g_getenv ("MONO_SLEEP_ABORT_LIMIT")) != NULL) {
		mono_set_errno (0);
		long threshold = strtol(sleepLimit, NULL, 10);
		if ((errno == 0) && (threshold >= 40))  {
			sleepAbortDuration = threshold;
			sleepWarnDuration = threshold / 20;
		} else
			g_warning("MONO_SLEEP_ABORT_LIMIT must be a number >= 40");
		g_free (sleepLimit);
	}

	mono_os_sem_init (&global_suspend_semaphore, 1);
	mono_os_sem_init (&suspend_semaphore, 0);
	mono_os_mutex_init (&join_mutex);

	mono_lls_init (&thread_list, NULL);
	mono_thread_smr_init ();
	mono_threads_suspend_init ();
	mono_threads_coop_init ();
	mono_threads_platform_init ();

	mono_thread_info_set_inited ();

	g_assert (sizeof (MonoNativeThreadId) <= sizeof (uintptr_t));
}

void
mono_thread_info_callbacks_init (MonoThreadInfoCallbacks *callbacks)
{
	threads_callbacks = *callbacks;
}

void
mono_thread_info_signals_init (void)
{
	mono_threads_suspend_init_signals ();
}

void
mono_thread_info_runtime_init (const MonoThreadInfoRuntimeCallbacks *callbacks)
{
	mono_runtime_callbacks = callbacks;
}

static gboolean
mono_thread_info_core_resume (MonoThreadInfo *info)
{
	gboolean res = FALSE;

	switch (mono_threads_transition_request_resume (info)) {
	case ResumeError:
		res = FALSE;
		break;
	case ResumeOk:
		res = TRUE;
		break;
	case ResumeInitSelfResume:
		resume_self_suspended (info);
		res = TRUE;
		break;
	case ResumeInitAsyncResume:
		resume_async_suspended (info);
		res = TRUE;
		break;
	case ResumeInitBlockingResume:
		resume_blocking_suspended (info);
		res = TRUE;
		break;
	}

	return res;
}

/*
 *   Current thread must hold the global_suspend_semaphore.
 *   The given MonoThreadInfo* is a suspended thread.
 *   Must be using hybrid suspend.
 */
static gboolean
mono_thread_info_core_pulse (MonoThreadInfo *info)
{
	gboolean res = FALSE;

	switch (mono_threads_transition_request_pulse (info)) {
	case PulseInitAsyncPulse:
		resume_async_suspended (info);
		res = TRUE;
		break;
	}
	return res;
}

gboolean
mono_thread_info_resume (MonoNativeThreadId tid)
{
	gboolean result; /* don't initialize it so the compiler can catch unitilized paths. */
	MonoThreadHazardPointers *hp = mono_hazard_pointer_get ();
	MonoThreadInfo *info;

	THREADS_SUSPEND_DEBUG ("RESUMING tid %p\n", (void*)tid);

	mono_thread_info_suspend_lock ();

	info = mono_thread_info_lookup (tid); /*info on HP1*/
	if (!info) {
		result = FALSE;
		goto cleanup;
	}

	result = mono_thread_info_core_resume (info);

	//Wait for the pending resume to finish
	mono_threads_wait_pending_operations ();

cleanup:
	mono_thread_info_suspend_unlock ();
	mono_hazard_pointer_clear (hp, 1);
	return result;
}

static MonoThreadBeginSuspendResult
begin_suspend_request_suspension_cordially (MonoThreadInfo *info);

static MonoThreadBeginSuspendResult
begin_suspend_peek_and_preempt (MonoThreadInfo *info);


MonoThreadBeginSuspendResult
mono_thread_info_begin_suspend (MonoThreadInfo *info, MonoThreadSuspendPhase phase)
{
	if (phase == MONO_THREAD_SUSPEND_PHASE_MOPUP && mono_threads_is_hybrid_suspension_enabled ())
		return begin_suspend_peek_and_preempt (info);
	else
		return begin_suspend_request_suspension_cordially (info);
}

MonoThreadBeginSuspendResult
begin_suspend_request_suspension_cordially (MonoThreadInfo *info)
{
	gboolean coop_aware_thread = FALSE;

	/* Ask the thread nicely to suspend.  In hybrid suspend, blocking
	 * threads are transitioned to blocking_suspend_requested, but not
	 * preemptively suspend in the current phase.
	 */
	switch (mono_threads_transition_request_suspension (info)) {
	case ReqSuspendAlreadySuspended:
		return MONO_THREAD_BEGIN_SUSPEND_SUSPENDED;
	case ReqSuspendAlreadySuspendedBlocking:
		if (mono_threads_is_hybrid_suspension_enabled ()) {
			/* This should only happen in the second phase of
			 * hybrid suspend. It means that the first phase asked
			 * the thread to suspend but did not signal it to
			 * suspend preemptively. */
			g_assert_not_reached ();
		} else {
			// This state should not be possible if we're using preemptive
			// suspend on a blocking thread - there can only be a single
			// suspend initiator at a time (guarded by
			// mono_thread_info_suspend_lock), and we expect the victim
			// thread to finish the two-phase preemptive suspension
			// procedure (and reach the ReqSuspendAlreadySuspended stage)
			// before the next suspend initiator can begin.
			g_assert (mono_threads_is_blocking_transition_enabled ());

			return MONO_THREAD_BEGIN_SUSPEND_SUSPENDED;
		}
	case ReqSuspendInitSuspendBlocking:
		// in full cooperative mode just leave BLOCKING
		// threads running until they try to return to RUNNING, so
		// nothing to do, in hybrid coop preempt the thread. If thread is coop aware,
		// handle its as normal cooperative mode.
		if (mono_threads_is_blocking_transition_enabled ())
			coop_aware_thread = thread_is_cooperative_suspend_aware (info);

		switch (begin_suspend_for_blocking_thread (info, FALSE, MONO_THREAD_SUSPEND_PHASE_INITIAL, coop_aware_thread, NULL)) {
		case BeginSuspendFail:
			return MONO_THREAD_BEGIN_SUSPEND_SKIP;
		case BeginSuspendOkNoWait:
			if (mono_threads_is_hybrid_suspension_enabled () && !coop_aware_thread)
				return MONO_THREAD_BEGIN_SUSPEND_NEXT_PHASE;
			else {
				g_assert (thread_is_cooperative_suspend_aware (info));
				return MONO_THREAD_BEGIN_SUSPEND_SUSPENDED;
			}
		case BeginSuspendOkPreemptive:
		case BeginSuspendOkCooperative:
			return MONO_THREAD_BEGIN_SUSPEND_SUSPENDED;
		default:
			g_assert_not_reached ();
		}
	case ReqSuspendInitSuspendRunning:
		// in full preemptive mode this should be a preemptive suspend
		// in full and hybrid cooperative modes this should be a coop suspend
		if (begin_suspend_for_running_thread (info, FALSE) != BeginSuspendFail)
			return MONO_THREAD_BEGIN_SUSPEND_SUSPENDED;
		else
			return MONO_THREAD_BEGIN_SUSPEND_SKIP;
	default:
		g_assert_not_reached ();
	}
}

MonoThreadBeginSuspendResult
begin_suspend_peek_and_preempt (MonoThreadInfo *info)
{
	/* This only makes sense for two-phase hybrid suspension:
	 * requires that a suspension request transition was already performed for 'info',
	 * and if it is still in blocking_suspend_requested, preemptively suspends it.
	 */
	g_assert (mono_threads_is_hybrid_suspension_enabled ());
	if (mono_threads_transition_peek_blocking_suspend_requested (info)) {
		// in full cooperative mode just leave BLOCKING
		// threads running until they try to return to RUNNING, so
		// nothing to do, in hybrid coop preempt the thread.
		switch (begin_suspend_for_blocking_thread (info, FALSE, MONO_THREAD_SUSPEND_PHASE_MOPUP, FALSE, NULL)) {
		case BeginSuspendFail:
			return MONO_THREAD_BEGIN_SUSPEND_SKIP;
		case BeginSuspendOkNoWait:
		case BeginSuspendOkCooperative:
			/* can't happen - should've suspended in the previous phase */
			g_assert_not_reached ();
		case BeginSuspendOkPreemptive:
			return MONO_THREAD_BEGIN_SUSPEND_SUSPENDED;
		default:
			g_assert_not_reached ();
		}
	} else
		return MONO_THREAD_BEGIN_SUSPEND_SUSPENDED;
}

gboolean
mono_thread_info_begin_resume (MonoThreadInfo *info)
{
	return mono_thread_info_core_resume (info);
}

gboolean
mono_thread_info_begin_pulse_resume_and_request_suspension (MonoThreadInfo *info)
{
	/* For two-phase suspend, we want to atomically resume the thread and
	 * request that it try to cooperatively suspend again.  Specifically,
	 * we really don't want it to transition from GC Safe to GC Unsafe
	 * because we then it could (in GC Unsafe) try to take a lock that's
	 * held by another preemptively-suspended thread, essentially
	 * recreating the same problem that two-phase suspend intends to
	 * fix. */
	if (mono_threads_is_multiphase_stw_enabled ())
		return mono_thread_info_core_pulse (info);
	else
		return mono_thread_info_core_resume (info);
}
/*
FIXME fix cardtable WB to be out of line and check with the runtime if the target is not the
WB trampoline. Another option is to encode wb ranges in MonoJitInfo, but that is somewhat hard.
*/
static gboolean
is_thread_in_critical_region (MonoThreadInfo *info)
{
	gpointer stack_start;
	MonoThreadUnwindState *state;

	if (mono_threads_platform_in_critical_region (info))
		return TRUE;

	/* Are we inside a system critical region? */
	if (info->inside_critical_region)
		return TRUE;

	/* Are we inside a GC critical region? */
	if (threads_callbacks.thread_in_critical_region && threads_callbacks.thread_in_critical_region (info)) {
		return TRUE;
	}

	/* The target thread might be shutting down and the domain might be null, which means no managed code left to run. */
	state = mono_thread_info_get_suspend_state (info);
	if (!state->unwind_data [MONO_UNWIND_DATA_DOMAIN])
		return FALSE;

	stack_start = MONO_CONTEXT_GET_SP (&state->ctx);
	/* altstack signal handler, sgen can't handle them, so we treat them as critical */
	if (stack_start < info->stack_start_limit || stack_start >= info->stack_end)
		return TRUE;

	if (threads_callbacks.ip_in_critical_region)
		return threads_callbacks.ip_in_critical_region ((MonoDomain *) state->unwind_data [MONO_UNWIND_DATA_DOMAIN], (char *) MONO_CONTEXT_GET_IP (&state->ctx));

	return FALSE;
}

gboolean
mono_thread_info_in_critical_location (MonoThreadInfo *info)
{
	return is_thread_in_critical_region (info);
}

/*
The return value is only valid until a matching mono_thread_info_resume is called
*/
static MonoThreadInfo*
suspend_sync (MonoNativeThreadId tid, gboolean interrupt_kernel)
{
	MonoThreadHazardPointers *hp = mono_hazard_pointer_get ();
	MonoThreadInfo *info = mono_thread_info_lookup (tid); /*info on HP1*/
	if (!info)
		return NULL;

	BeginSuspendResult suspend_result = BeginSuspendFail;
	switch (mono_threads_transition_request_suspension (info)) {
	case ReqSuspendAlreadySuspended:
		mono_hazard_pointer_clear (hp, 1); //XXX this is questionable we got to clean the suspend/resume nonsense of critical sections
		return info;
	case ReqSuspendInitSuspendRunning:
		suspend_result = begin_suspend_for_running_thread (info, interrupt_kernel);
		if (suspend_result == BeginSuspendFail) {
			mono_hazard_pointer_clear (hp, 1);
			return NULL;
		}
 		//Wait for the pending suspend to finish
		g_assert (suspend_result != BeginSuspendOkNoWait);
		mono_threads_wait_pending_operations ();

		if (!check_async_suspend (info, suspend_result)) {
			mono_thread_info_core_resume (info);
			mono_threads_wait_pending_operations ();
			mono_hazard_pointer_clear (hp, 1);
			return NULL;
		}
		return info;
	case ReqSuspendAlreadySuspendedBlocking:
		// ReqSuspendAlreadySuspendedBlocking should not be possible if
		// we're using preemptive suspend on a blocking thread - a
		// suspend initiator holds the mono_thread_info_suspend_lock
		// (there is a single suspend initiator at a time), and we
		// expect the victim thread to finish the two-phase preemptive
		// suspension procedure (and reach the
		// ReqSuspendAlreadySuspended stage) before the next suspend
		// initiator can begin.
		g_assert (mono_threads_is_blocking_transition_enabled () && !mono_threads_is_hybrid_suspension_enabled ());

		// if we tried to preempt the thread already, do nothing.
		// otherwise (if it's running in blocking mode) try to abort the syscall.
		if (interrupt_kernel)
			mono_threads_suspend_abort_syscall (info);

		return info;
	case ReqSuspendInitSuspendBlocking: {
		gboolean did_interrupt = FALSE;
		suspend_result = begin_suspend_for_blocking_thread (info, interrupt_kernel, MONO_THREAD_SUSPEND_PHASE_MOPUP, FALSE, &did_interrupt);
		if (suspend_result == BeginSuspendFail) {
			mono_hazard_pointer_clear (hp, 1);
			return NULL;
		}

		if (suspend_result != BeginSuspendOkNoWait)
			mono_threads_wait_pending_operations ();
		
		if (!check_async_suspend (info, suspend_result)) {
			mono_thread_info_core_resume (info);
			mono_threads_wait_pending_operations ();
			mono_hazard_pointer_clear (hp, 1);
			return NULL;
		}

		// if we tried to preempt the thread already, do nothing.
		// otherwise (if it's running in blocking mode) try to abort the syscall.
		if (interrupt_kernel && !did_interrupt)
			mono_threads_suspend_abort_syscall (info);

		return info;
	}
	default:
		g_assert_not_reached ();
	}
	g_assert_not_reached ();
}

static MonoThreadInfo*
suspend_sync_nolock (MonoNativeThreadId id, gboolean interrupt_kernel)
{
	MonoThreadInfo *info = NULL;
	int sleep_duration = 0;
	for (;;) {
		if (!(info = suspend_sync (id, interrupt_kernel))) {
			mono_hazard_pointer_clear (mono_hazard_pointer_get (), 1);
			return NULL;
		}

		/*WARNING: We now are in interrupt context until we resume the thread. */
		if (!is_thread_in_critical_region (info))
			break;

		if (!mono_thread_info_core_resume (info)) {
			mono_hazard_pointer_clear (mono_hazard_pointer_get (), 1);
			return NULL;
		}
		THREADS_SUSPEND_DEBUG ("RESTARTED thread tid %p\n", (void*)id);

		/* Wait for the pending resume to finish */
		mono_threads_wait_pending_operations ();

		if (sleep_duration == 0)
			mono_thread_info_yield ();
		else
			g_usleep (sleep_duration);

		sleep_duration += 10;
	}
	return info;
}

void
mono_thread_info_safe_suspend_and_run (MonoNativeThreadId id, gboolean interrupt_kernel, MonoSuspendThreadCallback callback, gpointer user_data)
{
	int result;
	MonoThreadInfo *info = NULL;
	MonoThreadHazardPointers *hp = mono_hazard_pointer_get ();

	THREADS_SUSPEND_DEBUG ("SUSPENDING tid %p (%s)\n", (void*)id, interrupt_kernel ? "int" : "");
	/*FIXME: unify this with self-suspend*/
	g_assert (id != mono_native_thread_id_get ());

	/* This can block during stw */
	mono_thread_info_suspend_lock ();
	mono_threads_begin_global_suspend ();

	info = suspend_sync_nolock (id, interrupt_kernel);
	THREADS_SUSPEND_DEBUG ("SUSPENDING tid %p (%s): info %p\n", (void*)id, interrupt_kernel ? "int" : "", info);
	if (!info)
		goto done;

	switch (result = callback (info, user_data)) {
	case MonoResumeThread:
		THREADS_SUSPEND_DEBUG ("CALLBACK tid %p (%s): MonoResumeThread\n", (void*)id, interrupt_kernel ? "int" : "");
		mono_hazard_pointer_set (hp, 1, info);
		mono_thread_info_core_resume (info);
		mono_threads_wait_pending_operations ();
#ifdef USE_WINDOWS_BACKEND
		// If we interrupt kernel but have blocking sync IO requests preventing the thread from running APC's
		// try to abort all sync blocking IO request. This must be done after thread has been resumed, but before releasing
		// global suspend lock (preventing other threads from supsending the thread).
		if (interrupt_kernel)
			mono_win32_abort_blocking_io_call (info);
#endif
		break;
	case KeepSuspended:
		THREADS_SUSPEND_DEBUG ("CALLBACK tid %p (%s): KeepSuspended\n", (void*)id, interrupt_kernel ? "int" : "");
		g_assert (!mono_threads_are_safepoints_enabled ());
		break;
	default:
		g_error ("Invalid suspend_and_run callback return value %d", result);
	}

done:
	mono_hazard_pointer_clear (hp, 1);
	mono_threads_end_global_suspend ();
	mono_thread_info_suspend_unlock ();
}

/**
Inject an assynchronous call into the target thread. The target thread must be suspended and
only a single async call can be setup for a given suspend cycle.
This async call must cause stack unwinding as the current implementation doesn't save enough state
to resume execution of the top-of-stack function. It's an acceptable limitation since this is
currently used only to deliver exceptions.
*/
void
mono_thread_info_setup_async_call (MonoThreadInfo *info, void (*target_func)(void*), void *user_data)
{
	if (!mono_threads_are_safepoints_enabled ()) {
		/* In non-coop mode, an async call can only be setup on an async suspended thread, but in coop mode, a thread
		 * may be in blocking state, and will execute the async call when leaving the safepoint, leaving a gc safe
		 * region or entering a gc unsafe region */
		g_assert (mono_thread_info_run_state (info) == STATE_ASYNC_SUSPENDED);
	}
	/*FIXME this is a bad assert, we probably should do proper locking and fail if one is already set*/
	g_assert (!info->async_target);
	info->async_target = target_func;
	/* This is not GC tracked */
	info->user_data = user_data;
}

/*
The suspend lock is held during any suspend in progress.
A GC that has safepoints must take this lock as part of its
STW to make sure no unsafe pending suspend is in progress.   
*/

static void
mono_thread_info_suspend_lock_with_info (MonoThreadInfo *info)
{
	g_assertf (info, ""); // f includes __func__
	g_assert (mono_thread_info_is_current (info));
	g_assert (mono_thread_info_is_live (info));

	MONO_ENTER_GC_SAFE_WITH_INFO(info);

	int res = mono_os_sem_wait (&global_suspend_semaphore, MONO_SEM_FLAGS_NONE);
	g_assert (res != -1);

	MONO_EXIT_GC_SAFE_WITH_INFO;
}

void
mono_thread_info_suspend_lock (void)
{
	MonoThreadInfo *info;
	gint res;

	info = mono_thread_info_current_unchecked ();
	if (info && mono_thread_info_is_live (info)) {
		mono_thread_info_suspend_lock_with_info (info);
		return;
	}

	/* mono_thread_info_suspend_lock () can be called from boehm-gc.c on_gc_notification before the new thread's
	 * start_wrapper calls mono_thread_info_attach but after pthread_create calls the start wrapper. */

	res = mono_os_sem_wait (&global_suspend_semaphore, MONO_SEM_FLAGS_NONE);
	g_assert (res != -1);
}

void
mono_thread_info_suspend_unlock (void)
{
	mono_os_sem_post (&global_suspend_semaphore);
}

/* Return the suspend state for the current thread.  Note: the thread must be
 * already suspended in order for this function to be callable.
 */
MonoThreadUnwindState*
mono_thread_info_get_suspend_state (MonoThreadInfo *info)
{
	int cur_state = mono_thread_info_current_state (info);
	switch (cur_state) {
	case STATE_ASYNC_SUSPENDED:
	case STATE_BLOCKING_ASYNC_SUSPENDED:
		return &info->thread_saved_state [ASYNC_SUSPEND_STATE_INDEX];
	case STATE_SELF_SUSPENDED:
	case STATE_BLOCKING_SELF_SUSPENDED:
		return &info->thread_saved_state [SELF_SUSPEND_STATE_INDEX];
	case STATE_BLOCKING_SUSPEND_REQUESTED:
		// This state is only valid for full cooperative suspend or cooparative suspend
		// aware threads. If we're preemptively suspending blocking threads,
		// this is not a valid suspend state.
		if ((mono_threads_is_cooperative_suspension_enabled () && !mono_threads_is_hybrid_suspension_enabled ()) || thread_is_cooperative_suspend_aware (info))
			return &info->thread_saved_state [SELF_SUSPEND_STATE_INDEX];
		break;
	default:
		break;
	}
/*
STATE_RUNNING
STATE_ASYNC_SUSPEND_REQUESTED
STATE_BLOCKING: All those are invalid suspend states.
STATE_BLOCKING_SUSPEND_REQUESTED: Invalid if we're preemptively suspending blocking threads.
*/
	g_error ("Cannot read suspend state when target %p is in the %s state", mono_thread_info_get_tid (info), mono_thread_state_name (cur_state));
}

/*
 * This is a very specific function whose only purpose is to
 * break a given thread from socket syscalls.
 *
 * This only exists because linux won't fail a call to connect
 * if the underlying is closed.
 *
 * TODO We should cleanup and unify this with the other syscall abort
 * facility.
 */
void
mono_thread_info_abort_socket_syscall_for_close (MonoNativeThreadId tid)
{
	MonoThreadHazardPointers *hp;
	MonoThreadInfo *info;

	if (tid == mono_native_thread_id_get ())
		return;

	mono_thread_info_suspend_lock ();
	hp = mono_hazard_pointer_get ();
	info = mono_thread_info_lookup (tid);
	if (!info) {
		mono_thread_info_suspend_unlock ();
		return;
	}
	mono_threads_begin_global_suspend ();

	mono_threads_suspend_abort_syscall (info);
	mono_threads_wait_pending_operations ();

	mono_hazard_pointer_clear (hp, 1);

	mono_threads_end_global_suspend ();
	mono_thread_info_suspend_unlock ();
}

/*
 * mono_thread_info_set_is_async_context:
 *
 *   Set whenever the current thread is in an async context. Some runtime functions might behave
 * differently while in an async context in order to be async safe.
 */
void
mono_thread_info_set_is_async_context (gboolean async_context)
{
	MonoThreadInfo *info = mono_thread_info_current ();

	if (info) {
		// If this assert fails, that means there is recursion and/or
		// concurrency, such that setting async_context to FALSE
		// that all the callers do after this, is incorrect,
		// and this should instead be incremented/decremented.
		//
		// As the value is only accessed via current(), that
		// limits the case to recursion, but increment/decrement
		// is still fast and correct and simple.
		g_assert (!async_context || !info->is_async_context);
		info->is_async_context = async_context;
	}
}

gboolean
mono_thread_info_is_async_context (void)
{
	MonoThreadInfo *info = mono_thread_info_current ();

	if (info)
		return info->is_async_context;
	else
		return FALSE;
}

/*
 * mono_thread_info_get_stack_bounds:
 *
 *   Return the address and size of the current threads stack. Return NULL as the 
 * stack address if the stack address cannot be determined.
 */
void
mono_thread_info_get_stack_bounds (guint8 **staddr, size_t *stsize)
{
	guint8 *current = (guint8 *)&stsize;
	mono_threads_platform_get_stack_bounds (staddr, stsize);
	if (!*staddr)
		return;

	/* Sanity check the result */
	g_assert ((current > *staddr) && (current < *staddr + *stsize));

#ifndef TARGET_WASM
	/* When running under emacs, sometimes staddr is not aligned to a page size */
	*staddr = (guint8*)((gssize)*staddr & ~(mono_pagesize () - 1));
#endif
}

gboolean
mono_thread_info_yield (void)
{
	return mono_threads_platform_yield ();
}

static mono_lazy_init_t sleep_init = MONO_LAZY_INIT_STATUS_NOT_INITIALIZED;
static MonoCoopMutex sleep_mutex;
static MonoCoopCond sleep_cond;

static void
sleep_initialize (void)
{
	mono_coop_mutex_init (&sleep_mutex);
	mono_coop_cond_init (&sleep_cond);
}

static void
sleep_interrupt (gpointer data)
{
	mono_coop_mutex_lock (&sleep_mutex);
	mono_coop_cond_broadcast (&sleep_cond);
	mono_coop_mutex_unlock (&sleep_mutex);
}

static guint32
sleep_interruptable (guint32 ms, gboolean *alerted)
{
	gint64 now, end;

	g_assert (MONO_INFINITE_WAIT == G_MAXUINT32);

	g_assert (alerted);
	*alerted = FALSE;

	if (ms != MONO_INFINITE_WAIT)
		end = mono_msec_ticks() + ms;

	mono_lazy_initialize (&sleep_init, sleep_initialize);

	mono_coop_mutex_lock (&sleep_mutex);

	for (;;) {
		if (ms != MONO_INFINITE_WAIT) {
			now = mono_msec_ticks();
			if (now >= end)
				break;
		}

		mono_thread_info_install_interrupt (sleep_interrupt, NULL, alerted);
		if (*alerted) {
			mono_coop_mutex_unlock (&sleep_mutex);
			return WAIT_IO_COMPLETION;
		}

		if (ms != MONO_INFINITE_WAIT)
			mono_coop_cond_timedwait (&sleep_cond, &sleep_mutex, end - now);
		else
			mono_coop_cond_wait (&sleep_cond, &sleep_mutex);

		mono_thread_info_uninstall_interrupt (alerted);
		if (*alerted) {
			mono_coop_mutex_unlock (&sleep_mutex);
			return WAIT_IO_COMPLETION;
		}
	}

	mono_coop_mutex_unlock (&sleep_mutex);

	return 0;
}

gint
mono_thread_info_sleep (guint32 ms, gboolean *alerted)
{
	if (ms == 0) {
		MonoThreadInfo *info;

		mono_thread_info_yield ();

		info = mono_thread_info_current ();
		if (info && mono_thread_info_is_interrupt_state (info))
			return WAIT_IO_COMPLETION;

		return 0;
	}

	if (alerted)
		return sleep_interruptable (ms, alerted);

	MONO_ENTER_GC_SAFE;

	if (ms == MONO_INFINITE_WAIT) {
		do {
#ifdef HOST_WIN32
			Sleep (G_MAXUINT32);
#else
			sleep (G_MAXUINT32);
#endif
		} while (1);
	} else {
#if defined (HAVE_CLOCK_NANOSLEEP) && !defined(__PASE__)
		int ret;
		struct timespec start, target;

		/* Use clock_nanosleep () to prevent time drifting problems when nanosleep () is interrupted by signals */
		ret = clock_gettime (CLOCK_MONOTONIC, &start);
		g_assert (ret == 0);

		target = start;
		target.tv_sec += ms / 1000;
		target.tv_nsec += (ms % 1000) * 1000000;
		if (target.tv_nsec > 999999999) {
			target.tv_nsec -= 999999999;
			target.tv_sec ++;
		}

		do {
			ret = g_clock_nanosleep (CLOCK_MONOTONIC, TIMER_ABSTIME, &target, NULL);
		} while (ret != 0);
#elif HOST_WIN32
		Sleep (ms);
#else
		int ret;
		struct timespec req, rem;

		req.tv_sec = ms / 1000;
		req.tv_nsec = (ms % 1000) * 1000000;

		do {
			memset (&rem, 0, sizeof (rem));
			ret = nanosleep (&req, &rem);
		} while (ret != 0);
#endif /* __linux__ */
	}

	MONO_EXIT_GC_SAFE;

	return 0;
}

gint
mono_thread_info_usleep (guint64 us)
{
	MONO_ENTER_GC_SAFE;
	g_usleep (us);
	MONO_EXIT_GC_SAFE;
	return 0;
}

gpointer
mono_thread_info_tls_get (THREAD_INFO_TYPE *info, MonoTlsKey key)
{
	return ((MonoThreadInfo*)info)->tls [key];
}

/*
 * mono_threads_info_tls_set:
 *
 *   Set the TLS key to VALUE in the info structure. This can be used to obtain
 * values of TLS variables for threads other than the current thread.
 * This should only be used for infrequently changing TLS variables, and it should
 * be paired with setting the real TLS variable since this provides no GC tracking.
 */
void
mono_thread_info_tls_set (THREAD_INFO_TYPE *info, MonoTlsKey key, gpointer value)
{
	((MonoThreadInfo*)info)->tls [key] = value;
}

/*
 * mono_thread_info_exit:
 *
 *   Exit the current thread.
 * This function doesn't return.
 */
void
mono_thread_info_exit (gsize exit_code)
{
	mono_thread_info_detach ();

	mono_threads_platform_exit (0);
}

/*
 * mono_threads_open_thread_handle:
 *
 *  Duplicate the handle. The handle needs to be closed by calling
 *  mono_threads_close_thread_handle () when it is no longer needed.
 */
MonoThreadHandle*
mono_threads_open_thread_handle (MonoThreadHandle *thread_handle)
{
	return mono_refcount_inc (thread_handle);
}

void
mono_threads_close_thread_handle (MonoThreadHandle *thread_handle)
{
	if (!thread_handle)
		return;
	mono_refcount_dec (thread_handle);
}

/*
 * mono_threads_open_native_thread_handle:
 *
 *  Duplicate the handle. The handle needs to be closed by calling
 *  mono_threads_close_native_thread_handle () when it is no longer needed.
 */
MonoNativeThreadHandle
mono_threads_open_native_thread_handle (MonoNativeThreadHandle thread_handle)
{
#ifdef HOST_WIN32
	BOOL success = FALSE;
	HANDLE new_thread_handle = NULL;

	g_assert (thread_handle && thread_handle != INVALID_HANDLE_VALUE);
	return DuplicateHandle (GetCurrentProcess (), thread_handle, GetCurrentProcess (), &new_thread_handle, 0, FALSE, DUPLICATE_SAME_ACCESS) ? new_thread_handle : NULL;
#else
	return MONO_GPOINTER_TO_NATIVE_THREAD_HANDLE (NULL);
#endif
}

void
mono_threads_close_native_thread_handle (MonoNativeThreadHandle thread_handle)
{
#ifdef HOST_WIN32
	g_assert (thread_handle != INVALID_HANDLE_VALUE);
	if (thread_handle)
		CloseHandle (thread_handle);
#endif
}

static void
mono_threads_signal_thread_handle (MonoThreadHandle* thread_handle)
{
	mono_os_event_set (&thread_handle->event);
}

#define INTERRUPT_STATE ((MonoThreadInfoInterruptToken*) (size_t) -1)

struct _MonoThreadInfoInterruptToken {
	void (*callback) (gpointer data);
	gpointer data;
};

/*
 * mono_thread_info_install_interrupt: install an interruption token for the current thread.
 *
 *  - @callback: must be able to be called from another thread and always cancel the wait
 *  - @data: passed to the callback
 *  - @interrupted: will be set to TRUE if a token is already installed, FALSE otherwise
 *     if set to TRUE, it must mean that the thread is in interrupted state
 */
void
mono_thread_info_install_interrupt (void (*callback) (gpointer data), gpointer data, gboolean *interrupted)
{
	MonoThreadInfo *info;
	MonoThreadInfoInterruptToken *previous_token, *token;

	g_assert (callback);

	g_assert (interrupted);
	*interrupted = FALSE;

	info = mono_thread_info_current ();
	g_assertf (info, ""); // f includes __func__

	/* The memory of this token can be freed at 2 places:
	 *  - if the token is not interrupted: it will be freed in uninstall, as info->interrupt_token has not been replaced
	 *     by the INTERRUPT_STATE flag value, and it still contains the pointer to the memory location
	 *  - if the token is interrupted: it will be freed in finish, as the token is now owned by the prepare/finish
	 *     functions, and info->interrupt_token does not contains a pointer to the memory anymore */
	token = g_new0 (MonoThreadInfoInterruptToken, 1);
	token->callback = callback;
	token->data = data;

	previous_token = (MonoThreadInfoInterruptToken *)mono_atomic_cas_ptr ((gpointer*) &info->interrupt_token, token, NULL);

	if (previous_token) {
		if (previous_token != INTERRUPT_STATE)
			g_error ("mono_thread_info_install_interrupt: previous_token should be INTERRUPT_STATE (%p), but it was %p", INTERRUPT_STATE, previous_token);

		g_free (token);

		*interrupted = TRUE;
	}

	THREADS_INTERRUPT_DEBUG ("interrupt install    tid %p token %p previous_token %p interrupted %s\n",
		mono_thread_info_get_tid (info), token, previous_token, *interrupted ? "TRUE" : "FALSE");
}

void
mono_thread_info_uninstall_interrupt (gboolean *interrupted)
{
	MonoThreadInfo *info;
	MonoThreadInfoInterruptToken *previous_token;

	/* Common to uninstall interrupt handler around OS API's affecting last error. */
	/* This method could call OS API's on some platforms that will reset last error so make sure to restore */
	/* last error before exit. */
	W32_DEFINE_LAST_ERROR_RESTORE_POINT;

	g_assert (interrupted);
	*interrupted = FALSE;

	info = mono_thread_info_current ();
	g_assertf (info, ""); // f includes __func__

	previous_token = (MonoThreadInfoInterruptToken *)mono_atomic_xchg_ptr ((gpointer*) &info->interrupt_token, NULL);

	/* only the installer can uninstall the token */
	g_assert (previous_token);

	if (previous_token == INTERRUPT_STATE) {
		/* if it is interrupted, then it is going to be freed in finish interrupt */
		*interrupted = TRUE;
	} else {
		g_free (previous_token);
	}

	THREADS_INTERRUPT_DEBUG ("interrupt uninstall  tid %p previous_token %p interrupted %s\n",
		mono_thread_info_get_tid (info), previous_token, *interrupted ? "TRUE" : "FALSE");

	W32_RESTORE_LAST_ERROR_FROM_RESTORE_POINT;
}

static MonoThreadInfoInterruptToken*
set_interrupt_state (MonoThreadInfo *info)
{
	MonoThreadInfoInterruptToken *token, *previous_token;

	g_assertf (info, ""); // f includes __func__

	/* Atomically obtain the token the thread is
	* waiting on, and change it to a flag value. */

	do {
		previous_token = info->interrupt_token;

		/* Already interrupted */
		if (previous_token == INTERRUPT_STATE) {
			token = NULL;
			break;
		}

		token = previous_token;
	} while (mono_atomic_cas_ptr ((gpointer*) &info->interrupt_token, INTERRUPT_STATE, previous_token) != previous_token);

	return token;
}

/*
 * mono_thread_info_prepare_interrupt:
 *
 * The state of the thread info interrupt token is set to 'interrupted' which means that :
 *  - if the thread calls one of the WaitFor functions, the function will return with
 *     WAIT_IO_COMPLETION instead of waiting
 *  - if the thread was waiting when this function was called, the wait will be broken
 *
 * It is possible that the wait functions return WAIT_IO_COMPLETION, but the target thread
 * didn't receive the interrupt signal yet, in this case it should call the wait function
 * again. This essentially means that the target thread will busy wait until it is ready to
 * process the interruption.
 */
MonoThreadInfoInterruptToken*
mono_thread_info_prepare_interrupt (MonoThreadInfo *info)
{
	MonoThreadInfoInterruptToken *token;

	token = set_interrupt_state (info);

	THREADS_INTERRUPT_DEBUG ("interrupt prepare    tid %p token %p\n",
		mono_thread_info_get_tid (info), token);

	return token;
}

void
mono_thread_info_finish_interrupt (MonoThreadInfoInterruptToken *token)
{
	THREADS_INTERRUPT_DEBUG ("interrupt finish     token %p\n", token);

	if (token == NULL)
		return;

	g_assert (token->callback);

	token->callback (token->data);

	g_free (token);
}

void
mono_thread_info_self_interrupt (void)
{
	MonoThreadInfo *info;
	MonoThreadInfoInterruptToken *token;

	info = mono_thread_info_current ();
	g_assertf (info, ""); // f includes __func__

	token = set_interrupt_state (info);
	g_assert (!token);

	THREADS_INTERRUPT_DEBUG ("interrupt self       tid %p\n",
		mono_thread_info_get_tid (info));
}

/* Clear the interrupted flag of the current thread, set with
 * mono_thread_info_self_interrupt, so it can wait again */
void
mono_thread_info_clear_self_interrupt (void)
{
	MonoThreadInfo *info;
	MonoThreadInfoInterruptToken *previous_token;

	info = mono_thread_info_current ();
	g_assertf (info, ""); // f includes __func__

	previous_token = (MonoThreadInfoInterruptToken *)mono_atomic_cas_ptr ((gpointer*) &info->interrupt_token, NULL, INTERRUPT_STATE);
	g_assert (previous_token == NULL || previous_token == INTERRUPT_STATE);

	THREADS_INTERRUPT_DEBUG ("interrupt clear self tid %p previous_token %p\n", mono_thread_info_get_tid (info), previous_token);
}

gboolean
mono_thread_info_is_interrupt_state (MonoThreadInfo *info)
{
	g_assertf (info, ""); // f includes __func__
	return mono_atomic_load_ptr ((gpointer*) &info->interrupt_token) == INTERRUPT_STATE;
}

void
mono_thread_info_describe_interrupt_token (MonoThreadInfo *info, GString *text)
{
	g_assertf (info, ""); // f includes __func__

	if (!mono_atomic_load_ptr ((gpointer*) &info->interrupt_token))
		g_string_append_printf (text, "not waiting");
	else if (mono_atomic_load_ptr ((gpointer*) &info->interrupt_token) == INTERRUPT_STATE)
		g_string_append_printf (text, "interrupted state");
	else
		g_string_append_printf (text, "waiting");
}

gboolean
mono_thread_info_is_current (MonoThreadInfo *info)
{
	return mono_thread_info_get_tid (info) == mono_native_thread_id_get ();
}

MonoThreadInfoWaitRet
mono_thread_info_wait_one_handle (MonoThreadHandle *thread_handle, guint32 timeout, gboolean alertable)
{
	MonoOSEventWaitRet res;

	res = mono_os_event_wait_one (&thread_handle->event, timeout, alertable);
	if (res == MONO_OS_EVENT_WAIT_RET_SUCCESS_0)
		return MONO_THREAD_INFO_WAIT_RET_SUCCESS_0;
	else if (res == MONO_OS_EVENT_WAIT_RET_ALERTED)
		return MONO_THREAD_INFO_WAIT_RET_ALERTED;
	else if (res == MONO_OS_EVENT_WAIT_RET_TIMEOUT)
		return MONO_THREAD_INFO_WAIT_RET_TIMEOUT;
	else
		g_error ("%s: unknown res value %d", __func__, res);
}

MonoThreadInfoWaitRet
mono_thread_info_wait_multiple_handle (MonoThreadHandle **thread_handles, gsize nhandles, MonoOSEvent *background_change_event, gboolean waitall, guint32 timeout, gboolean alertable)
{
	MonoOSEventWaitRet res;
	MonoOSEvent *thread_events [MONO_OS_EVENT_WAIT_MAXIMUM_OBJECTS];
	gint i;

	g_assert (nhandles <= MONO_OS_EVENT_WAIT_MAXIMUM_OBJECTS);
	if (background_change_event)
		g_assert (nhandles <= MONO_OS_EVENT_WAIT_MAXIMUM_OBJECTS - 1);

	for (i = 0; i < nhandles; ++i)
		thread_events [i] = &thread_handles [i]->event;

	if (background_change_event)
		thread_events [nhandles ++] = background_change_event;

	res = mono_os_event_wait_multiple (thread_events, nhandles, waitall, timeout, alertable);
	if (res >= MONO_OS_EVENT_WAIT_RET_SUCCESS_0 && res <= MONO_OS_EVENT_WAIT_RET_SUCCESS_0 + nhandles - 1)
		return (MonoThreadInfoWaitRet)(MONO_THREAD_INFO_WAIT_RET_SUCCESS_0 + (res - MONO_OS_EVENT_WAIT_RET_SUCCESS_0));
	else if (res == MONO_OS_EVENT_WAIT_RET_ALERTED)
		return MONO_THREAD_INFO_WAIT_RET_ALERTED;
	else if (res == MONO_OS_EVENT_WAIT_RET_TIMEOUT)
		return MONO_THREAD_INFO_WAIT_RET_TIMEOUT;
	else
		g_error ("%s: unknown res value %d", __func__, res);
}

/*
 * mono_threads_join_mutex:
 *
 *   This mutex is used to avoid races between pthread_create () and pthread_join () on osx, see
 * https://bugzilla.xamarin.com/show_bug.cgi?id=50529
 * The code inside the lock should not block.
 */
void
mono_threads_join_lock (void)
{
#ifdef TARGET_OSX
	mono_os_mutex_lock (&join_mutex);
#endif
}

void
mono_threads_join_unlock (void)
{
#ifdef TARGET_OSX
	mono_os_mutex_unlock (&join_mutex);
#endif
}


gboolean
mono_thread_info_set_tools_data (void *data)
{
	MonoThreadInfo *info = mono_thread_info_current_unchecked ();
	if (!info)
		return FALSE;
	if (info->tools_data)
		return FALSE;
	info->tools_data = data;
	return TRUE;
}

void*
mono_thread_info_get_tools_data (void)
{
	MonoThreadInfo *info = mono_thread_info_current_unchecked ();

	return info ? info->tools_data : NULL;
}