diff options
Diffstat (limited to 'thirdparty/include/opus_custom.h')
| -rw-r--r-- | thirdparty/include/opus_custom.h | 329 |
1 files changed, 0 insertions, 329 deletions
diff --git a/thirdparty/include/opus_custom.h b/thirdparty/include/opus_custom.h deleted file mode 100644 index e7861d6f..00000000 --- a/thirdparty/include/opus_custom.h +++ /dev/null @@ -1,329 +0,0 @@ -/* Copyright (c) 2007-2008 CSIRO - Copyright (c) 2007-2009 Xiph.Org Foundation - Copyright (c) 2008-2012 Gregory Maxwell - Written by Jean-Marc Valin and Gregory Maxwell */ -/* - Redistribution and use in source and binary forms, with or without - modification, are permitted provided that the following conditions - are met: - - - Redistributions of source code must retain the above copyright - notice, this list of conditions and the following disclaimer. - - - Redistributions in binary form must reproduce the above copyright - notice, this list of conditions and the following disclaimer in the - documentation and/or other materials provided with the distribution. - - THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER - OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -*/ - -/** - @file opus_custom.h - @brief Opus-Custom reference implementation API - */ - -#ifndef OPUS_CUSTOM_H -#define OPUS_CUSTOM_H - -#include "opus_defines.h" - -#ifdef __cplusplus -extern "C" { -#endif - -#ifdef CUSTOM_MODES -#define OPUS_CUSTOM_EXPORT OPUS_EXPORT -#define OPUS_CUSTOM_EXPORT_STATIC OPUS_EXPORT -#else -#define OPUS_CUSTOM_EXPORT -#ifdef CELT_C -#define OPUS_CUSTOM_EXPORT_STATIC static inline -#else -#define OPUS_CUSTOM_EXPORT_STATIC -#endif -#endif - -/** @defgroup opus_custom Opus Custom - * @{ - * Opus Custom is an optional part of the Opus specification and - * reference implementation which uses a distinct API from the regular - * API and supports frame sizes that are not normally supported.\ Use - * of Opus Custom is discouraged for all but very special applications - * for which a frame size different from 2.5, 5, 10, or 20 ms is needed - * (for either complexity or latency reasons) and where interoperability - * is less important. - * - * In addition to the interoperability limitations the use of Opus custom - * disables a substantial chunk of the codec and generally lowers the - * quality available at a given bitrate. Normally when an application needs - * a different frame size from the codec it should buffer to match the - * sizes but this adds a small amount of delay which may be important - * in some very low latency applications. Some transports (especially - * constant rate RF transports) may also work best with frames of - * particular durations. - * - * Libopus only supports custom modes if they are enabled at compile time. - * - * The Opus Custom API is similar to the regular API but the - * @ref opus_encoder_create and @ref opus_decoder_create calls take - * an additional mode parameter which is a structure produced by - * a call to @ref opus_custom_mode_create. Both the encoder and decoder - * must create a mode using the same sample rate (fs) and frame size - * (frame size) so these parameters must either be signaled out of band - * or fixed in a particular implementation. - * - * Similar to regular Opus the custom modes support on the fly frame size - * switching, but the sizes available depend on the particular frame size in - * use. For some initial frame sizes on a single on the fly size is available. - */ - -/** Contains the state of an encoder. One encoder state is needed - for each stream. It is initialized once at the beginning of the - stream. Do *not* re-initialize the state for every frame. - @brief Encoder state - */ -typedef struct OpusCustomEncoder OpusCustomEncoder; - -/** State of the decoder. One decoder state is needed for each stream. - It is initialized once at the beginning of the stream. Do *not* - re-initialize the state for every frame. - @brief Decoder state - */ -typedef struct OpusCustomDecoder OpusCustomDecoder; - -/** The mode contains all the information necessary to create an - encoder. Both the encoder and decoder need to be initialized - with exactly the same mode, otherwise the output will be - corrupted. - @brief Mode configuration - */ -typedef struct OpusCustomMode OpusCustomMode; - -/** Creates a new mode struct. This will be passed to an encoder or - * decoder. The mode MUST NOT BE DESTROYED until the encoders and - * decoders that use it are destroyed as well. - * @param [in] Fs <tt>int</tt>: Sampling rate (8000 to 96000 Hz) - * @param [in] frame_size <tt>int</tt>: Number of samples (per channel) to encode in each - * packet (64 - 1024, prime factorization must contain zero or more 2s, 3s, or 5s and no other primes) - * @param [out] error <tt>int*</tt>: Returned error code (if NULL, no error will be returned) - * @return A newly created mode - */ -OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomMode *opus_custom_mode_create(opus_int32 Fs, int frame_size, int *error); - -/** Destroys a mode struct. Only call this after all encoders and - * decoders using this mode are destroyed as well. - * @param [in] mode <tt>OpusCustomMode*</tt>: Mode to be freed. - */ -OPUS_CUSTOM_EXPORT void opus_custom_mode_destroy(OpusCustomMode *mode); - -/* Encoder */ -/** Gets the size of an OpusCustomEncoder structure. - * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration - * @param [in] channels <tt>int</tt>: Number of channels - * @returns size - */ -OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_encoder_get_size( - const OpusCustomMode *mode, - int channels -) OPUS_ARG_NONNULL(1); - -/** Creates a new encoder state. Each stream needs its own encoder - * state (can't be shared across simultaneous streams). - * @param [in] mode <tt>OpusCustomMode*</tt>: Contains all the information about the characteristics of - * the stream (must be the same characteristics as used for the - * decoder) - * @param [in] channels <tt>int</tt>: Number of channels - * @param [out] error <tt>int*</tt>: Returns an error code - * @return Newly created encoder state. -*/ -OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomEncoder *opus_custom_encoder_create( - const OpusCustomMode *mode, - int channels, - int *error -) OPUS_ARG_NONNULL(1); - -/** Initializes a previously allocated encoder state - * The memory pointed to by st must be the size returned by opus_custom_encoder_get_size. - * This is intended for applications which use their own allocator instead of malloc. - * @see opus_custom_encoder_create(),opus_custom_encoder_get_size() - * To reset a previously initialized state use the OPUS_RESET_STATE CTL. - * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state - * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of - * the stream (must be the same characteristics as used for the - * decoder) - * @param [in] channels <tt>int</tt>: Number of channels - * @return OPUS_OK Success or @ref opus_errorcodes - */ -OPUS_CUSTOM_EXPORT_STATIC int opus_custom_encoder_init( - OpusCustomEncoder *st, - const OpusCustomMode *mode, - int channels -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); - -/** Destroys a an encoder state. - * @param[in] st <tt>OpusCustomEncoder*</tt>: State to be freed. - */ -OPUS_CUSTOM_EXPORT void opus_custom_encoder_destroy(OpusCustomEncoder *st); - -/** Encodes a frame of audio. - * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state - * @param [in] pcm <tt>float*</tt>: PCM audio in float format, with a normal range of +/-1.0. - * Samples with a range beyond +/-1.0 are supported but will - * be clipped by decoders using the integer API and should - * only be used if it is known that the far end supports - * extended dynamic range. There must be exactly - * frame_size samples per channel. - * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal - * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long. - * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame - * (can change from one frame to another) - * @return Number of bytes written to "compressed". - * If negative, an error has occurred (see error codes). It is IMPORTANT that - * the length returned be somehow transmitted to the decoder. Otherwise, no - * decoding is possible. - */ -OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode_float( - OpusCustomEncoder *st, - const float *pcm, - int frame_size, - unsigned char *compressed, - int maxCompressedBytes -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); - -/** Encodes a frame of audio. - * @param [in] st <tt>OpusCustomEncoder*</tt>: Encoder state - * @param [in] pcm <tt>opus_int16*</tt>: PCM audio in signed 16-bit format (native endian). - * There must be exactly frame_size samples per channel. - * @param [in] frame_size <tt>int</tt>: Number of samples per frame of input signal - * @param [out] compressed <tt>char *</tt>: The compressed data is written here. This may not alias pcm and must be at least maxCompressedBytes long. - * @param [in] maxCompressedBytes <tt>int</tt>: Maximum number of bytes to use for compressing the frame - * (can change from one frame to another) - * @return Number of bytes written to "compressed". - * If negative, an error has occurred (see error codes). It is IMPORTANT that - * the length returned be somehow transmitted to the decoder. Otherwise, no - * decoding is possible. - */ -OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_encode( - OpusCustomEncoder *st, - const opus_int16 *pcm, - int frame_size, - unsigned char *compressed, - int maxCompressedBytes -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2) OPUS_ARG_NONNULL(4); - -/** Perform a CTL function on an Opus custom encoder. - * - * Generally the request and subsequent arguments are generated - * by a convenience macro. - * @see opus_encoderctls - */ -OPUS_CUSTOM_EXPORT int opus_custom_encoder_ctl(OpusCustomEncoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1); - -/* Decoder */ - -/** Gets the size of an OpusCustomDecoder structure. - * @param [in] mode <tt>OpusCustomMode *</tt>: Mode configuration - * @param [in] channels <tt>int</tt>: Number of channels - * @returns size - */ -OPUS_CUSTOM_EXPORT_STATIC OPUS_WARN_UNUSED_RESULT int opus_custom_decoder_get_size( - const OpusCustomMode *mode, - int channels -) OPUS_ARG_NONNULL(1); - -/** Creates a new decoder state. Each stream needs its own decoder state (can't - * be shared across simultaneous streams). - * @param [in] mode <tt>OpusCustomMode</tt>: Contains all the information about the characteristics of the - * stream (must be the same characteristics as used for the encoder) - * @param [in] channels <tt>int</tt>: Number of channels - * @param [out] error <tt>int*</tt>: Returns an error code - * @return Newly created decoder state. - */ -OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT OpusCustomDecoder *opus_custom_decoder_create( - const OpusCustomMode *mode, - int channels, - int *error -) OPUS_ARG_NONNULL(1); - -/** Initializes a previously allocated decoder state - * The memory pointed to by st must be the size returned by opus_custom_decoder_get_size. - * This is intended for applications which use their own allocator instead of malloc. - * @see opus_custom_decoder_create(),opus_custom_decoder_get_size() - * To reset a previously initialized state use the OPUS_RESET_STATE CTL. - * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state - * @param [in] mode <tt>OpusCustomMode *</tt>: Contains all the information about the characteristics of - * the stream (must be the same characteristics as used for the - * encoder) - * @param [in] channels <tt>int</tt>: Number of channels - * @return OPUS_OK Success or @ref opus_errorcodes - */ -OPUS_CUSTOM_EXPORT_STATIC int opus_custom_decoder_init( - OpusCustomDecoder *st, - const OpusCustomMode *mode, - int channels -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2); - -/** Destroys a an decoder state. - * @param[in] st <tt>OpusCustomDecoder*</tt>: State to be freed. - */ -OPUS_CUSTOM_EXPORT void opus_custom_decoder_destroy(OpusCustomDecoder *st); - -/** Decode an opus custom frame with floating point output - * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state - * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss - * @param [in] len <tt>int</tt>: Number of bytes in payload - * @param [out] pcm <tt>float*</tt>: Output signal (interleaved if 2 channels). length - * is frame_size*channels*sizeof(float) - * @param [in] frame_size Number of samples per channel of available space in *pcm. - * @returns Number of decoded samples or @ref opus_errorcodes - */ -OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode_float( - OpusCustomDecoder *st, - const unsigned char *data, - int len, - float *pcm, - int frame_size -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); - -/** Decode an opus custom frame - * @param [in] st <tt>OpusCustomDecoder*</tt>: Decoder state - * @param [in] data <tt>char*</tt>: Input payload. Use a NULL pointer to indicate packet loss - * @param [in] len <tt>int</tt>: Number of bytes in payload - * @param [out] pcm <tt>opus_int16*</tt>: Output signal (interleaved if 2 channels). length - * is frame_size*channels*sizeof(opus_int16) - * @param [in] frame_size Number of samples per channel of available space in *pcm. - * @returns Number of decoded samples or @ref opus_errorcodes - */ -OPUS_CUSTOM_EXPORT OPUS_WARN_UNUSED_RESULT int opus_custom_decode( - OpusCustomDecoder *st, - const unsigned char *data, - int len, - opus_int16 *pcm, - int frame_size -) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(4); - -/** Perform a CTL function on an Opus custom decoder. - * - * Generally the request and subsequent arguments are generated - * by a convenience macro. - * @see opus_genericctls - */ -OPUS_CUSTOM_EXPORT int opus_custom_decoder_ctl(OpusCustomDecoder * OPUS_RESTRICT st, int request, ...) OPUS_ARG_NONNULL(1); - -/**@}*/ - -#ifdef __cplusplus -} -#endif - -#endif /* OPUS_CUSTOM_H */ |