[tx-robot] updated from transifex

Signed-off-by: Nextcloud bot <bot@nextcloud.com>

20 files changed, 258 insertions, 44 deletions

diff --git a/l10n/cs.js b/l10n/cs.js
index d9c5516..8609282 100644
--- a/l10n/cs.js
+++ b/l10n/cs.js
@@ -26,21 +26,40 @@ OC.L10N.register(
     "Monitoring" : "Dohledování",
     "Monitoring app with useful server information" : "Dohledovací aplikace, poskytující užitečné informace o serveru",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "Poskytuje užitečné informace o serveru, jako vytížení procesoru, využití operační paměti, obsazenost datového úložiště, počet uživatelů, atd.",
+    "Operating System:" : "Operační systém:",
+    "CPU:" : "Procesor:",
     "Unknown Processor" : "Neznámý procesor",
+    "Memory:" : "Operační paměť:",
+    "Server time:" : "Čas na serveru:",
+    "Uptime:" : "Doba chodu od minulého zapnutí:",
     "Load" : "Vytížení",
     "Memory" : "Operační paměť",
     "Disk" : "Úložiště",
+    "Mount:" : "Připojeno pod:",
+    "Filesystem:" : "Souborový systém:",
     "Size:" : "Velikost:",
+    "Available:" : "K dispozici:",
+    "Used:" : "Použito:",
     "You will get a notification once one of your disks is nearly full." : "Pokud budou vaše úložiště téměř zaplněná, budete na to upozorněni.",
     "Files:" : "Souborů:",
     "Storages:" : "Úložišť:",
     "Free Space:" : "Volné místo:",
     "Network" : "Síť",
+    "Hostname:" : "Název stroje:",
+    "DNS:" : "DNS:",
+    "Gateway:" : "Brána:",
+    "Status:" : "Stav:",
+    "Speed:" : "Rychlost:",
+    "MAC:" : "MAC adresa:",
+    "IPv4:" : "IPv4:",
+    "IPv6:" : "IPv6:",
     "Active users" : "Aktivní uživatelé",
     "Total users:" : "Celkem uživatelů:",
     "Shares" : "Sdílení",
     "PHP" : "PHP",
     "Version:" : "Verze:",
+    "Memory limit:" : "Limit paměti:",
+    "Max execution time:" : "Nejdelší umožněný čas vykonávání:",
     "Upload max size:" : "Nejvyšší umožněná velikost nahrávaného souboru:",
     "Extensions:" : "Rozšíření:",
     "Unable to list extensions" : "Nepodařilo se vypsat rozšíření",
diff --git a/l10n/cs.json b/l10n/cs.json
index 66e898d..9823f32 100644
--- a/l10n/cs.json
+++ b/l10n/cs.json
@@ -24,21 +24,40 @@
     "Monitoring" : "Dohledování",
     "Monitoring app with useful server information" : "Dohledovací aplikace, poskytující užitečné informace o serveru",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "Poskytuje užitečné informace o serveru, jako vytížení procesoru, využití operační paměti, obsazenost datového úložiště, počet uživatelů, atd.",
+    "Operating System:" : "Operační systém:",
+    "CPU:" : "Procesor:",
     "Unknown Processor" : "Neznámý procesor",
+    "Memory:" : "Operační paměť:",
+    "Server time:" : "Čas na serveru:",
+    "Uptime:" : "Doba chodu od minulého zapnutí:",
     "Load" : "Vytížení",
     "Memory" : "Operační paměť",
     "Disk" : "Úložiště",
+    "Mount:" : "Připojeno pod:",
+    "Filesystem:" : "Souborový systém:",
     "Size:" : "Velikost:",
+    "Available:" : "K dispozici:",
+    "Used:" : "Použito:",
     "You will get a notification once one of your disks is nearly full." : "Pokud budou vaše úložiště téměř zaplněná, budete na to upozorněni.",
     "Files:" : "Souborů:",
     "Storages:" : "Úložišť:",
     "Free Space:" : "Volné místo:",
     "Network" : "Síť",
+    "Hostname:" : "Název stroje:",
+    "DNS:" : "DNS:",
+    "Gateway:" : "Brána:",
+    "Status:" : "Stav:",
+    "Speed:" : "Rychlost:",
+    "MAC:" : "MAC adresa:",
+    "IPv4:" : "IPv4:",
+    "IPv6:" : "IPv6:",
     "Active users" : "Aktivní uživatelé",
     "Total users:" : "Celkem uživatelů:",
     "Shares" : "Sdílení",
     "PHP" : "PHP",
     "Version:" : "Verze:",
+    "Memory limit:" : "Limit paměti:",
+    "Max execution time:" : "Nejdelší umožněný čas vykonávání:",
     "Upload max size:" : "Nejvyšší umožněná velikost nahrávaného souboru:",
     "Extensions:" : "Rozšíření:",
     "Unable to list extensions" : "Nepodařilo se vypsat rozšíření",
diff --git a/l10n/de.js b/l10n/de.js
index 8f9517f..1fef76f 100644
--- a/l10n/de.js
+++ b/l10n/de.js
@@ -26,16 +26,26 @@ OC.L10N.register(
     "Monitoring" : "Information",
     "Monitoring app with useful server information" : "Monitoring-App mit nützlichen Serverinformationen",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "Zeigt nützliche Informationen des Servers an wie z.B. CPU-Last, Arbeitsspeicherauslastung, Massenspeicherauslastung, Anzahl der Benutzer, usw.",
+    "CPU:" : "Prozessor:",
     "Unknown Processor" : "Unbekannter Prozessor",
+    "Memory:" : "Speicher:",
+    "Server time:" : "Server-Zeit:",
+    "Uptime:" : "Betriebszeit:",
     "Load" : "Auslastung",
     "Memory" : "Speicher",
     "Disk" : "Festplatte",
+    "Filesystem:" : "Dateisystem:",
     "Size:" : "Größe:",
     "You will get a notification once one of your disks is nearly full." : "Du erhältst eine Benachrichtigung sobald eines Deiner Speichermedien fast voll ist.",
     "Files:" : "Dateien:",
     "Storages:" : "Speicher:",
     "Free Space:" : "Freier Speicherplatz:",
     "Network" : "Netzwerk",
+    "Status:" : "Status:",
+    "Speed:" : "Geschwindigkeit:",
+    "MAC:" : "MAC:",
+    "IPv4:" : "IPv4:",
+    "IPv6:" : "IPv6:",
     "Active users" : "Aktive Benutzer",
     "Total users:" : "Benutzer gesamt:",
     "Shares" : "Freigaben",
diff --git a/l10n/de.json b/l10n/de.json
index c025b77..b0946bf 100644
--- a/l10n/de.json
+++ b/l10n/de.json
@@ -24,16 +24,26 @@
     "Monitoring" : "Information",
     "Monitoring app with useful server information" : "Monitoring-App mit nützlichen Serverinformationen",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "Zeigt nützliche Informationen des Servers an wie z.B. CPU-Last, Arbeitsspeicherauslastung, Massenspeicherauslastung, Anzahl der Benutzer, usw.",
+    "CPU:" : "Prozessor:",
     "Unknown Processor" : "Unbekannter Prozessor",
+    "Memory:" : "Speicher:",
+    "Server time:" : "Server-Zeit:",
+    "Uptime:" : "Betriebszeit:",
     "Load" : "Auslastung",
     "Memory" : "Speicher",
     "Disk" : "Festplatte",
+    "Filesystem:" : "Dateisystem:",
     "Size:" : "Größe:",
     "You will get a notification once one of your disks is nearly full." : "Du erhältst eine Benachrichtigung sobald eines Deiner Speichermedien fast voll ist.",
     "Files:" : "Dateien:",
     "Storages:" : "Speicher:",
     "Free Space:" : "Freier Speicherplatz:",
     "Network" : "Netzwerk",
+    "Status:" : "Status:",
+    "Speed:" : "Geschwindigkeit:",
+    "MAC:" : "MAC:",
+    "IPv4:" : "IPv4:",
+    "IPv6:" : "IPv6:",
     "Active users" : "Aktive Benutzer",
     "Total users:" : "Benutzer gesamt:",
     "Shares" : "Freigaben",
diff --git a/l10n/de_DE.js b/l10n/de_DE.js
index ef8ea5c..649ec4a 100644
--- a/l10n/de_DE.js
+++ b/l10n/de_DE.js
@@ -26,21 +26,40 @@ OC.L10N.register(
     "Monitoring" : "Information",
     "Monitoring app with useful server information" : "Monitoring-App mit nützlichen Serverinformationen",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "Zeigt nützliche Informationen des Servers an wie z.B. CPU-Last, Arbeitsspeicherauslastung, Massenspeicherauslastung, Anzahl der Benutzer, usw.",
+    "Operating System:" : "Betriebssystem:",
+    "CPU:" : "Prozessor:",
     "Unknown Processor" : "Unbekannter Prozessor",
+    "Memory:" : "Speicher:",
+    "Server time:" : "Server-Zeit:",
+    "Uptime:" : "Betriebszeit:",
     "Load" : "Auslastung",
     "Memory" : "Speicher",
     "Disk" : "Festplatte",
+    "Mount:" : "Mount:",
+    "Filesystem:" : "Dateisystem:",
     "Size:" : "Größe:",
+    "Available:" : "Verfügbar:",
+    "Used:" : "Verwendet:",
     "You will get a notification once one of your disks is nearly full." : "Sie erhalten eine Benachrichtigung, sobald eines Ihrer Speichermedien fast voll ist.",
     "Files:" : "Dateien:",
     "Storages:" : "Speicher:",
     "Free Space:" : "Freier Speicherplatz:",
     "Network" : "Netzwerk",
+    "Hostname:" : "Hostname:",
+    "DNS:" : "DNS:",
+    "Gateway:" : "Gateway:",
+    "Status:" : "Status:",
+    "Speed:" : "Geschwindigkeit:",
+    "MAC:" : "MAC:",
+    "IPv4:" : "IPv4:",
+    "IPv6:" : "IPv6:",
     "Active users" : "Aktive Benutzer",
     "Total users:" : "Benutzer gesamt:",
     "Shares" : "Freigaben",
     "PHP" : "PHP",
     "Version:" : "Version:",
+    "Memory limit:" : "Speicherlimit:",
+    "Max execution time:" : "Maximale Ausführungszeit:",
     "Upload max size:" : "Maximale Größe zum Hochladen:",
     "Extensions:" : "Erweiterungen:",
     "Unable to list extensions" : "Erweiterungen können nicht aufgelistet werden",
@@ -49,6 +68,7 @@ OC.L10N.register(
     "External monitoring tool" : "Externes Überwachungsprogramm",
     "You can connect an external monitoring tool by using this end point:" : "Durch Verwendung des folgenden Zugangspunktes kann ein externes Überwachungsprogramm verwendet werden: ",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Wenn Sie \"?format=json\" am Ende der URL anhängen, erhalten Sie das Ergebnis in JSON.",
+    "To use an access token, please generate one then set it using the following command:" : "Um ein Zugriffstoken zu verwenden, generieren Sie bitte eines und legen Sie es mit dem folgenden Befehl fest:",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Übergeben Sie dann das Token mit dem Header \"NC-Token\" durch Aufrufen der obige URL.",
     "Load average" : "Durchschnittsauslastung",
     "Last minute" : "Letzte Minute",
diff --git a/l10n/de_DE.json b/l10n/de_DE.json
index 9f99ffd..2ebbbca 100644
--- a/l10n/de_DE.json
+++ b/l10n/de_DE.json
@@ -24,21 +24,40 @@
     "Monitoring" : "Information",
     "Monitoring app with useful server information" : "Monitoring-App mit nützlichen Serverinformationen",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "Zeigt nützliche Informationen des Servers an wie z.B. CPU-Last, Arbeitsspeicherauslastung, Massenspeicherauslastung, Anzahl der Benutzer, usw.",
+    "Operating System:" : "Betriebssystem:",
+    "CPU:" : "Prozessor:",
     "Unknown Processor" : "Unbekannter Prozessor",
+    "Memory:" : "Speicher:",
+    "Server time:" : "Server-Zeit:",
+    "Uptime:" : "Betriebszeit:",
     "Load" : "Auslastung",
     "Memory" : "Speicher",
     "Disk" : "Festplatte",
+    "Mount:" : "Mount:",
+    "Filesystem:" : "Dateisystem:",
     "Size:" : "Größe:",
+    "Available:" : "Verfügbar:",
+    "Used:" : "Verwendet:",
     "You will get a notification once one of your disks is nearly full." : "Sie erhalten eine Benachrichtigung, sobald eines Ihrer Speichermedien fast voll ist.",
     "Files:" : "Dateien:",
     "Storages:" : "Speicher:",
     "Free Space:" : "Freier Speicherplatz:",
     "Network" : "Netzwerk",
+    "Hostname:" : "Hostname:",
+    "DNS:" : "DNS:",
+    "Gateway:" : "Gateway:",
+    "Status:" : "Status:",
+    "Speed:" : "Geschwindigkeit:",
+    "MAC:" : "MAC:",
+    "IPv4:" : "IPv4:",
+    "IPv6:" : "IPv6:",
     "Active users" : "Aktive Benutzer",
     "Total users:" : "Benutzer gesamt:",
     "Shares" : "Freigaben",
     "PHP" : "PHP",
     "Version:" : "Version:",
+    "Memory limit:" : "Speicherlimit:",
+    "Max execution time:" : "Maximale Ausführungszeit:",
     "Upload max size:" : "Maximale Größe zum Hochladen:",
     "Extensions:" : "Erweiterungen:",
     "Unable to list extensions" : "Erweiterungen können nicht aufgelistet werden",
@@ -47,6 +66,7 @@
     "External monitoring tool" : "Externes Überwachungsprogramm",
     "You can connect an external monitoring tool by using this end point:" : "Durch Verwendung des folgenden Zugangspunktes kann ein externes Überwachungsprogramm verwendet werden: ",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Wenn Sie \"?format=json\" am Ende der URL anhängen, erhalten Sie das Ergebnis in JSON.",
+    "To use an access token, please generate one then set it using the following command:" : "Um ein Zugriffstoken zu verwenden, generieren Sie bitte eines und legen Sie es mit dem folgenden Befehl fest:",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Übergeben Sie dann das Token mit dem Header \"NC-Token\" durch Aufrufen der obige URL.",
     "Load average" : "Durchschnittsauslastung",
     "Last minute" : "Letzte Minute",
diff --git a/l10n/gd.js b/l10n/gd.js
deleted file mode 100644
index 66864fa..0000000
--- a/l10n/gd.js
+++ /dev/null
@@ -1,7 +0,0 @@
-OC.L10N.register(
-    "serverinfo",
-    {
-    "1 hour" : "Uair a thìde",
-    "Copy" : "Dèan lethbhreac"
-},
-"nplurals=4; plural=(n==1 || n==11) ? 0 : (n==2 || n==12) ? 1 : (n > 2 && n < 20) ? 2 : 3;");
diff --git a/l10n/gd.json b/l10n/gd.json
deleted file mode 100644
index 40c9102..0000000
--- a/l10n/gd.json
+++ /dev/null
@@ -1,5 +0,0 @@
-{ "translations": {
-    "1 hour" : "Uair a thìde",
-    "Copy" : "Dèan lethbhreac"
-},"pluralForm" :"nplurals=4; plural=(n==1 || n==11) ? 0 : (n==2 || n==12) ? 1 : (n > 2 && n < 20) ? 2 : 3;"
-}
\ No newline at end of file
diff --git a/l10n/kn.js b/l10n/kn.js
deleted file mode 100644
index ca80a21..0000000
--- a/l10n/kn.js
+++ /dev/null
@@ -1,9 +0,0 @@
-OC.L10N.register(
-    "serverinfo",
-    {
-    "Users" : "ಬಳಕೆದಾರರು",
-    "Groups" : "ಗುಂಪುಗಳು",
-    "Copy" : "ನಕಲಿಸಿ",
-    "Size" : " ಗಾತ್ರ"
-},
-"nplurals=2; plural=(n > 1);");
diff --git a/l10n/kn.json b/l10n/kn.json
deleted file mode 100644
index 4dcbd64..0000000
--- a/l10n/kn.json
+++ /dev/null
@@ -1,7 +0,0 @@
-{ "translations": {
-    "Users" : "ಬಳಕೆದಾರರು",
-    "Groups" : "ಗುಂಪುಗಳು",
-    "Copy" : "ನಕಲಿಸಿ",
-    "Size" : " ಗಾತ್ರ"
-},"pluralForm" :"nplurals=2; plural=(n > 1);"
-}
\ No newline at end of file
diff --git a/l10n/ne.js b/l10n/ne.js
deleted file mode 100644
index 44ceb43..0000000
--- a/l10n/ne.js
+++ /dev/null
@@ -1,9 +0,0 @@
-OC.L10N.register(
-    "serverinfo",
-    {
-    "Copied!" : "प्रतिलिपि गरियो!",
-    "Not supported!" : "समर्थित छैन!",
-    "Press ⌘-C to copy." : "प्रतिलिपि गर्न ⌘-C थिच्नुहोस्।",
-    "Press Ctrl-C to copy." : "प्रतिलिपि गर्न Ctrl-C थिच्नुहोस्।"
-},
-"nplurals=2; plural=(n != 1);");
diff --git a/l10n/ne.json b/l10n/ne.json
deleted file mode 100644
index 9e715d2..0000000
--- a/l10n/ne.json
+++ /dev/null
@@ -1,7 +0,0 @@
-{ "translations": {
-    "Copied!" : "प्रतिलिपि गरियो!",
-    "Not supported!" : "समर्थित छैन!",
-    "Press ⌘-C to copy." : "प्रतिलिपि गर्न ⌘-C थिच्नुहोस्।",
-    "Press Ctrl-C to copy." : "प्रतिलिपि गर्न Ctrl-C थिच्नुहोस्।"
-},"pluralForm" :"nplurals=2; plural=(n != 1);"
-}
\ No newline at end of file
diff --git a/l10n/pl.js b/l10n/pl.js
index 09473e2..3dc8923 100644
--- a/l10n/pl.js
+++ b/l10n/pl.js
@@ -26,21 +26,40 @@ OC.L10N.register(
     "Monitoring" : "Monitoring",
     "Monitoring app with useful server information" : "Aplikacja monitorująca z przydatnymi informacjami o serwerze",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "Zapewnia przydatne informacje o serwerze, takie jak obciążenie procesora, użycie pamięci RAM, wykorzystanie dysku, liczba użytkowników itp.",
+    "Operating System:" : "System operacyjny:",
+    "CPU:" : "Procesor CPU:",
     "Unknown Processor" : "Procesor nieznany",
+    "Memory:" : "Pamięć:",
+    "Server time:" : "Czas serwera:",
+    "Uptime:" : "Czas pracy:",
     "Load" : "Obciążenie",
     "Memory" : "Pamięć",
     "Disk" : "Dysk",
+    "Mount:" : "Zamontowany:",
+    "Filesystem:" : "System plików:",
     "Size:" : "Rozmiar:",
+    "Available:" : "Dostępny:",
+    "Used:" : "Używany:",
     "You will get a notification once one of your disks is nearly full." : "Otrzymasz powiadomienie, gdy jeden z dysków będzie prawie zapełniony.",
     "Files:" : "Pliki:",
     "Storages:" : "Magazyny:",
     "Free Space:" : "Wolne miejsce:",
     "Network" : "Sieć",
+    "Hostname:" : "Nazwa hosta:",
+    "DNS:" : "DNS:",
+    "Gateway:" : "Brama:",
+    "Status:" : "Status:",
+    "Speed:" : "Prędkość:",
+    "MAC:" : "MAC:",
+    "IPv4:" : "IPv4:",
+    "IPv6:" : "IPv6:",
     "Active users" : "Aktywni użytkownicy",
     "Total users:" : "Ilość użytkowników:",
     "Shares" : "Udostępnienia",
     "PHP" : "PHP",
     "Version:" : "Wersja:",
+    "Memory limit:" : "Limit pamięci:",
+    "Max execution time:" : "Maksymalny czas wykonania:",
     "Upload max size:" : "Limit wielkości przesyłanego pliku (upload_max_filesize):",
     "Extensions:" : "Rozszerzenia:",
     "Unable to list extensions" : "Nie można wyświetlić listy rozszerzeń",
@@ -49,6 +68,7 @@ OC.L10N.register(
     "External monitoring tool" : "Zewnętrzne narzędzie monitorujące",
     "You can connect an external monitoring tool by using this end point:" : "Możesz podłączyć zewnętrzne narzędzie do monitorowania, używając tego punktu końcowego:",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Dołączenie \"?format=json\" na końcu adresu URL daje wynik w formacie JSON.",
+    "To use an access token, please generate one then set it using the following command:" : "Aby użyć tokena dostępu, wygeneruj go, a następnie ustaw za pomocą następującego polecenia:",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Następnie przekaż token z nagłówkiem \"NC-Token\" podczas odpytywania powyższego adresu URL.",
     "Load average" : "Średnie obciążenie",
     "Last minute" : "Ostatnia minuta",
diff --git a/l10n/pl.json b/l10n/pl.json
index 054f918..f1e7fc3 100644
--- a/l10n/pl.json
+++ b/l10n/pl.json
@@ -24,21 +24,40 @@
     "Monitoring" : "Monitoring",
     "Monitoring app with useful server information" : "Aplikacja monitorująca z przydatnymi informacjami o serwerze",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "Zapewnia przydatne informacje o serwerze, takie jak obciążenie procesora, użycie pamięci RAM, wykorzystanie dysku, liczba użytkowników itp.",
+    "Operating System:" : "System operacyjny:",
+    "CPU:" : "Procesor CPU:",
     "Unknown Processor" : "Procesor nieznany",
+    "Memory:" : "Pamięć:",
+    "Server time:" : "Czas serwera:",
+    "Uptime:" : "Czas pracy:",
     "Load" : "Obciążenie",
     "Memory" : "Pamięć",
     "Disk" : "Dysk",
+    "Mount:" : "Zamontowany:",
+    "Filesystem:" : "System plików:",
     "Size:" : "Rozmiar:",
+    "Available:" : "Dostępny:",
+    "Used:" : "Używany:",
     "You will get a notification once one of your disks is nearly full." : "Otrzymasz powiadomienie, gdy jeden z dysków będzie prawie zapełniony.",
     "Files:" : "Pliki:",
     "Storages:" : "Magazyny:",
     "Free Space:" : "Wolne miejsce:",
     "Network" : "Sieć",
+    "Hostname:" : "Nazwa hosta:",
+    "DNS:" : "DNS:",
+    "Gateway:" : "Brama:",
+    "Status:" : "Status:",
+    "Speed:" : "Prędkość:",
+    "MAC:" : "MAC:",
+    "IPv4:" : "IPv4:",
+    "IPv6:" : "IPv6:",
     "Active users" : "Aktywni użytkownicy",
     "Total users:" : "Ilość użytkowników:",
     "Shares" : "Udostępnienia",
     "PHP" : "PHP",
     "Version:" : "Wersja:",
+    "Memory limit:" : "Limit pamięci:",
+    "Max execution time:" : "Maksymalny czas wykonania:",
     "Upload max size:" : "Limit wielkości przesyłanego pliku (upload_max_filesize):",
     "Extensions:" : "Rozszerzenia:",
     "Unable to list extensions" : "Nie można wyświetlić listy rozszerzeń",
@@ -47,6 +66,7 @@
     "External monitoring tool" : "Zewnętrzne narzędzie monitorujące",
     "You can connect an external monitoring tool by using this end point:" : "Możesz podłączyć zewnętrzne narzędzie do monitorowania, używając tego punktu końcowego:",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Dołączenie \"?format=json\" na końcu adresu URL daje wynik w formacie JSON.",
+    "To use an access token, please generate one then set it using the following command:" : "Aby użyć tokena dostępu, wygeneruj go, a następnie ustaw za pomocą następującego polecenia:",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Następnie przekaż token z nagłówkiem \"NC-Token\" podczas odpytywania powyższego adresu URL.",
     "Load average" : "Średnie obciążenie",
     "Last minute" : "Ostatnia minuta",
diff --git a/l10n/tr.js b/l10n/tr.js
index a4a7e90..64e1254 100644
--- a/l10n/tr.js
+++ b/l10n/tr.js
@@ -26,21 +26,40 @@ OC.L10N.register(
     "Monitoring" : "İzleniyor",
     "Monitoring app with useful server information" : "Yararlı sunucu bilgileri sunan izleme uygulaması",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "İşlemci yükü, bellek ve disk kullanımı, kullanıcı sayısı gibi sunucu hakkında çeşitli bilgiler sağlar. ",
+    "Operating System:" : "İşletim sistemi:",
+    "CPU:" : "İşlemci",
     "Unknown Processor" : "İşlemci bilinmiyor",
+    "Memory:" : "Bellek:",
+    "Server time:" : "Sunucu zamanı:",
+    "Uptime:" : "Çalışma süresi:",
     "Load" : "Yük",
     "Memory" : "Bellek",
     "Disk" : "Disk",
+    "Mount:" : "Takılı:",
+    "Filesystem:" : "Dosya sistemi:",
     "Size:" : "Boyut:",
+    "Available:" : "Kullanılabilir:",
+    "Used:" : "Kullanılan:",
     "You will get a notification once one of your disks is nearly full." : "Diskinizde boş alan azaldığında bir bildirim alacaksınız.",
     "Files:" : "Dosyalar:",
     "Storages:" : "Depolama birimleri:",
     "Free Space:" : "Boş alan:",
     "Network" : "Ağ",
+    "Hostname:" : "Sunucu adı:",
+    "DNS:" : "DNS:",
+    "Gateway:" : "Ağ geçidi:",
+    "Status:" : "Durum:",
+    "Speed:" : "Hız:",
+    "MAC:" : "MAC:",
+    "IPv4:" : "IPv4:",
+    "IPv6:" : "IPv6:",
     "Active users" : "Etkin kullanıcılar",
     "Total users:" : "Kullanıcı sayısı:",
     "Shares" : "Paylaşımlar",
     "PHP" : "PHP",
     "Version:" : "Sürüm:",
+    "Memory limit:" : "Bellek sınırı:",
+    "Max execution time:" : "En uzun çalışma süresi:",
     "Upload max size:" : "En büyük yükleme boyutu:",
     "Extensions:" : "Eklentiler:",
     "Unable to list extensions" : "Eklentiler listelenemedi",
@@ -49,6 +68,7 @@ OC.L10N.register(
     "External monitoring tool" : "Dış izleme aracı",
     "You can connect an external monitoring tool by using this end point:" : "Bu uç noktasını kullanarak bir dış izleme aracı bağlayabilirsiniz:",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Adresin sonuna \"?format=json\" eklendiğinde sonuçlar JSON biçiminde alınabilir.",
+    "To use an access token, please generate one then set it using the following command:" : "Erişim kodunu kullanmak için yeni bir kod üretip şu komutu yürüterek ayarlayın:",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Ardından yukarıdaki adresi sorgularken kodu \"NC-Token\" üst bilgisi ile gönderin.",
     "Load average" : "Yük ortalaması",
     "Last minute" : "Son dakika",
diff --git a/l10n/tr.json b/l10n/tr.json
index eef1b0b..587607c 100644
--- a/l10n/tr.json
+++ b/l10n/tr.json
@@ -24,21 +24,40 @@
     "Monitoring" : "İzleniyor",
     "Monitoring app with useful server information" : "Yararlı sunucu bilgileri sunan izleme uygulaması",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "İşlemci yükü, bellek ve disk kullanımı, kullanıcı sayısı gibi sunucu hakkında çeşitli bilgiler sağlar. ",
+    "Operating System:" : "İşletim sistemi:",
+    "CPU:" : "İşlemci",
     "Unknown Processor" : "İşlemci bilinmiyor",
+    "Memory:" : "Bellek:",
+    "Server time:" : "Sunucu zamanı:",
+    "Uptime:" : "Çalışma süresi:",
     "Load" : "Yük",
     "Memory" : "Bellek",
     "Disk" : "Disk",
+    "Mount:" : "Takılı:",
+    "Filesystem:" : "Dosya sistemi:",
     "Size:" : "Boyut:",
+    "Available:" : "Kullanılabilir:",
+    "Used:" : "Kullanılan:",
     "You will get a notification once one of your disks is nearly full." : "Diskinizde boş alan azaldığında bir bildirim alacaksınız.",
     "Files:" : "Dosyalar:",
     "Storages:" : "Depolama birimleri:",
     "Free Space:" : "Boş alan:",
     "Network" : "Ağ",
+    "Hostname:" : "Sunucu adı:",
+    "DNS:" : "DNS:",
+    "Gateway:" : "Ağ geçidi:",
+    "Status:" : "Durum:",
+    "Speed:" : "Hız:",
+    "MAC:" : "MAC:",
+    "IPv4:" : "IPv4:",
+    "IPv6:" : "IPv6:",
     "Active users" : "Etkin kullanıcılar",
     "Total users:" : "Kullanıcı sayısı:",
     "Shares" : "Paylaşımlar",
     "PHP" : "PHP",
     "Version:" : "Sürüm:",
+    "Memory limit:" : "Bellek sınırı:",
+    "Max execution time:" : "En uzun çalışma süresi:",
     "Upload max size:" : "En büyük yükleme boyutu:",
     "Extensions:" : "Eklentiler:",
     "Unable to list extensions" : "Eklentiler listelenemedi",
@@ -47,6 +66,7 @@
     "External monitoring tool" : "Dış izleme aracı",
     "You can connect an external monitoring tool by using this end point:" : "Bu uç noktasını kullanarak bir dış izleme aracı bağlayabilirsiniz:",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "Adresin sonuna \"?format=json\" eklendiğinde sonuçlar JSON biçiminde alınabilir.",
+    "To use an access token, please generate one then set it using the following command:" : "Erişim kodunu kullanmak için yeni bir kod üretip şu komutu yürüterek ayarlayın:",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "Ardından yukarıdaki adresi sorgularken kodu \"NC-Token\" üst bilgisi ile gönderin.",
     "Load average" : "Yük ortalaması",
     "Last minute" : "Son dakika",
diff --git a/l10n/zh_HK.js b/l10n/zh_HK.js
index cd4394d..406816b 100644
--- a/l10n/zh_HK.js
+++ b/l10n/zh_HK.js
@@ -26,21 +26,40 @@ OC.L10N.register(
     "Monitoring" : "監控",
     "Monitoring app with useful server information" : "使用有用的伺服器訊息以監控應用程式",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "提供有用的伺服器訊息，例如CPU負載、記憶體使用情況、磁碟使用情況、用戶數等。",
+    "Operating System:" : "作業系統：",
+    "CPU:" : "CPU：",
     "Unknown Processor" : "處理器不詳",
+    "Memory:" : "記憶體：",
+    "Server time:" : "伺服器時間：",
+    "Uptime:" : "運行時間：",
     "Load" : "負載",
     "Memory" : "記憶體",
     "Disk" : "硬碟",
+    "Mount:" : "掛載：",
+    "Filesystem:" : "檔案系統：",
     "Size:" : "大小：",
+    "Available:" : "可用：",
+    "Used:" : "已使用：",
     "You will get a notification once one of your disks is nearly full." : "你將在其中一個硬碟快滿前收到通知。",
     "Files:" : "檔案：",
     "Storages:" : "儲存設備：",
     "Free Space:" : "可用空間：",
     "Network" : "網絡",
+    "Hostname:" : "主機名稱：",
+    "DNS:" : "DNS：",
+    "Gateway:" : "網關：",
+    "Status:" : "狀態：",
+    "Speed:" : "速度：",
+    "MAC:" : "MAC：",
+    "IPv4:" : "IPv4：",
+    "IPv6:" : "IPv6：",
     "Active users" : "活躍用戶",
     "Total users:" : "總用戶：",
     "Shares" : "分享",
     "PHP" : "PHP",
     "Version:" : "版本：",
+    "Memory limit:" : "記憶體限制：",
+    "Max execution time:" : "最長執行時間：",
     "Upload max size:" : "上傳至多：",
     "Extensions:" : "PHP 擴展：",
     "Unable to list extensions" : "無法列出 PHP 擴展",
@@ -49,6 +68,7 @@ OC.L10N.register(
     "External monitoring tool" : "外部監控工具",
     "You can connect an external monitoring tool by using this end point:" : "您可以使用此終端連接外部監視工具：",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "在URL後面連接參數 \"?format=json\" 將會得到json格式的回傳結果。",
+    "To use an access token, please generate one then set it using the following command:" : "要使用存取權杖，請生成一個權杖，然後使用以下命令對其進行設置：",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "然後在查詢上述 URL 時將權杖與 “ NC-Token” 標頭一起傳遞。",
     "Load average" : "平均負載",
     "Last minute" : "最後一分鐘",
diff --git a/l10n/zh_HK.json b/l10n/zh_HK.json
index 01eb094..bafe1d5 100644
--- a/l10n/zh_HK.json
+++ b/l10n/zh_HK.json
@@ -24,21 +24,40 @@
     "Monitoring" : "監控",
     "Monitoring app with useful server information" : "使用有用的伺服器訊息以監控應用程式",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "提供有用的伺服器訊息，例如CPU負載、記憶體使用情況、磁碟使用情況、用戶數等。",
+    "Operating System:" : "作業系統：",
+    "CPU:" : "CPU：",
     "Unknown Processor" : "處理器不詳",
+    "Memory:" : "記憶體：",
+    "Server time:" : "伺服器時間：",
+    "Uptime:" : "運行時間：",
     "Load" : "負載",
     "Memory" : "記憶體",
     "Disk" : "硬碟",
+    "Mount:" : "掛載：",
+    "Filesystem:" : "檔案系統：",
     "Size:" : "大小：",
+    "Available:" : "可用：",
+    "Used:" : "已使用：",
     "You will get a notification once one of your disks is nearly full." : "你將在其中一個硬碟快滿前收到通知。",
     "Files:" : "檔案：",
     "Storages:" : "儲存設備：",
     "Free Space:" : "可用空間：",
     "Network" : "網絡",
+    "Hostname:" : "主機名稱：",
+    "DNS:" : "DNS：",
+    "Gateway:" : "網關：",
+    "Status:" : "狀態：",
+    "Speed:" : "速度：",
+    "MAC:" : "MAC：",
+    "IPv4:" : "IPv4：",
+    "IPv6:" : "IPv6：",
     "Active users" : "活躍用戶",
     "Total users:" : "總用戶：",
     "Shares" : "分享",
     "PHP" : "PHP",
     "Version:" : "版本：",
+    "Memory limit:" : "記憶體限制：",
+    "Max execution time:" : "最長執行時間：",
     "Upload max size:" : "上傳至多：",
     "Extensions:" : "PHP 擴展：",
     "Unable to list extensions" : "無法列出 PHP 擴展",
@@ -47,6 +66,7 @@
     "External monitoring tool" : "外部監控工具",
     "You can connect an external monitoring tool by using this end point:" : "您可以使用此終端連接外部監視工具：",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "在URL後面連接參數 \"?format=json\" 將會得到json格式的回傳結果。",
+    "To use an access token, please generate one then set it using the following command:" : "要使用存取權杖，請生成一個權杖，然後使用以下命令對其進行設置：",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "然後在查詢上述 URL 時將權杖與 “ NC-Token” 標頭一起傳遞。",
     "Load average" : "平均負載",
     "Last minute" : "最後一分鐘",
diff --git a/l10n/zh_TW.js b/l10n/zh_TW.js
index 325a330..69e9b2b 100644
--- a/l10n/zh_TW.js
+++ b/l10n/zh_TW.js
@@ -26,21 +26,40 @@ OC.L10N.register(
     "Monitoring" : "監控",
     "Monitoring app with useful server information" : "使用有用的伺服器訊息以監控應用程式",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "提供有用的伺服器訊息，例如CPU負載、記憶體使用情況、磁碟使用情況、用戶數等。",
+    "Operating System:" : "作業系統：",
+    "CPU:" : "CPU：",
     "Unknown Processor" : "未知的處理器",
+    "Memory:" : "記憶體：",
+    "Server time:" : "伺服器時間：",
+    "Uptime:" : "運作時間：",
     "Load" : "負載",
     "Memory" : "記憶體",
     "Disk" : "硬碟",
+    "Mount:" : "掛載：",
+    "Filesystem:" : "檔案系統：",
     "Size:" : "大小:",
+    "Available:" : "可用：",
+    "Used:" : "已使用：",
     "You will get a notification once one of your disks is nearly full." : "你將在硬碟使用量快要用完前收到一次通知。",
     "Files:" : "檔案:",
     "Storages:" : "儲存設備：",
     "Free Space:" : "可用空間：",
     "Network" : "網路",
+    "Hostname:" : "主機名稱：",
+    "DNS:" : "DNS：",
+    "Gateway:" : "網路閘道：",
+    "Status:" : "狀態：",
+    "Speed:" : "速度：",
+    "MAC:" : "MAC：",
+    "IPv4:" : "IPv4：",
+    "IPv6:" : "IPv6：",
     "Active users" : "活動中的使用者",
     "Total users:" : "總使用者：",
     "Shares" : "分享",
     "PHP" : "PHP",
     "Version:" : "版本:",
+    "Memory limit:" : "記憶體限制：",
+    "Max execution time:" : "最大執行時間：",
     "Upload max size:" : "上傳至多:",
     "Extensions:" : "副檔名：",
     "Unable to list extensions" : "無法列出擴充套件",
@@ -49,6 +68,7 @@ OC.L10N.register(
     "External monitoring tool" : "外部監控工具",
     "You can connect an external monitoring tool by using this end point:" : "您可以使用此終端連接外部監視工具：",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "在URL後面連接參數 \"?format=json\" 將會得到json格式的回傳結果。",
+    "To use an access token, please generate one then set it using the following command:" : "要使用存取權杖，請產生一個，然後使用下列指令設定：",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "然後在查詢上面的 URL 時，將權杖與「NC-Token」標頭一起傳遞。",
     "Load average" : "平均負載",
     "Last minute" : "最後一分鐘",
diff --git a/l10n/zh_TW.json b/l10n/zh_TW.json
index 5a7af6e..09a9d69 100644
--- a/l10n/zh_TW.json
+++ b/l10n/zh_TW.json
@@ -24,21 +24,40 @@
     "Monitoring" : "監控",
     "Monitoring app with useful server information" : "使用有用的伺服器訊息以監控應用程式",
     "Provides useful server information, such as CPU load, RAM usage, disk usage, number of users, etc." : "提供有用的伺服器訊息，例如CPU負載、記憶體使用情況、磁碟使用情況、用戶數等。",
+    "Operating System:" : "作業系統：",
+    "CPU:" : "CPU：",
     "Unknown Processor" : "未知的處理器",
+    "Memory:" : "記憶體：",
+    "Server time:" : "伺服器時間：",
+    "Uptime:" : "運作時間：",
     "Load" : "負載",
     "Memory" : "記憶體",
     "Disk" : "硬碟",
+    "Mount:" : "掛載：",
+    "Filesystem:" : "檔案系統：",
     "Size:" : "大小:",
+    "Available:" : "可用：",
+    "Used:" : "已使用：",
     "You will get a notification once one of your disks is nearly full." : "你將在硬碟使用量快要用完前收到一次通知。",
     "Files:" : "檔案:",
     "Storages:" : "儲存設備：",
     "Free Space:" : "可用空間：",
     "Network" : "網路",
+    "Hostname:" : "主機名稱：",
+    "DNS:" : "DNS：",
+    "Gateway:" : "網路閘道：",
+    "Status:" : "狀態：",
+    "Speed:" : "速度：",
+    "MAC:" : "MAC：",
+    "IPv4:" : "IPv4：",
+    "IPv6:" : "IPv6：",
     "Active users" : "活動中的使用者",
     "Total users:" : "總使用者：",
     "Shares" : "分享",
     "PHP" : "PHP",
     "Version:" : "版本:",
+    "Memory limit:" : "記憶體限制：",
+    "Max execution time:" : "最大執行時間：",
     "Upload max size:" : "上傳至多:",
     "Extensions:" : "副檔名：",
     "Unable to list extensions" : "無法列出擴充套件",
@@ -47,6 +66,7 @@
     "External monitoring tool" : "外部監控工具",
     "You can connect an external monitoring tool by using this end point:" : "您可以使用此終端連接外部監視工具：",
     "Appending \"?format=json\" at the end of the URL gives you the result in JSON." : "在URL後面連接參數 \"?format=json\" 將會得到json格式的回傳結果。",
+    "To use an access token, please generate one then set it using the following command:" : "要使用存取權杖，請產生一個，然後使用下列指令設定：",
     "Then pass the token with the \"NC-Token\" header when querying the above URL." : "然後在查詢上面的 URL 時，將權杖與「NC-Token」標頭一起傳遞。",
     "Load average" : "平均負載",
     "Last minute" : "最後一分鐘",