diff options
4 files changed, 33 insertions, 6 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 80b7b02e8a..6c6d04a923 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -73,6 +73,9 @@ ipq40xx_setup_interfaces() netgear,srs60) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" ;; + openmesh,a42) + ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1" + ;; zte,mf286d) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan" ;; @@ -159,6 +162,9 @@ ipq40xx_setup_macs() pakedge,wr-1) wan_mac=$(macaddr_add $(get_mac_label) 1) ;; + openmesh,a42) + label_mac="$(mtd_get_mac_binary "0:ART" 0x0)" + ;; esac [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh index ddfef1ab2d..4ae4103131 100644 --- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh +++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh @@ -29,6 +29,10 @@ preinit_set_mac_address() { ip link set dev lan1 address $(macaddr_add "$base_mac" 1) ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7) ;; + openmesh,a42) + ip link set dev ethernet1 address $(mtd_get_mac_binary "0:ART" 0x0) + ip link set dev ethernet2 address $(mtd_get_mac_binary "0:ART" 0x6) + ;; mikrotik,wap-ac) base_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base) ip link set dev sw-eth1 address "$base_mac" diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts index 2236edf80b..89f5183045 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts @@ -17,10 +17,6 @@ status = "okay"; }; - mdio@90000 { - status = "okay"; - }; - tcsr@194b000 { /* select hostmode */ compatible = "qcom,tcsr"; @@ -166,6 +162,28 @@ status = "okay"; }; +&mdio { + status = "okay"; +}; + +&gmac { + status = "okay"; +}; + +&switch { + status = "okay"; +}; + +&swport4 { + status = "okay"; + label = "ethernet2"; +}; + +&swport5 { + status = "okay"; + label = "ethernet1"; +}; + &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "OM-A42"; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index 9fb34a7871..14a2745719 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -888,8 +888,7 @@ define Device/openmesh_a42 IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata endef -# Missing DSA Setup -#TARGET_DEVICES += openmesh_a42 +TARGET_DEVICES += openmesh_a42 define Device/openmesh_a62 $(call Device/FitImageLzma) |