Merge pull request #275 from PavelSindler/MK2v3.1.0

first layer cal. gcode corrections

1 files changed, 23 insertions, 23 deletions

diff --git a/Firmware/ultralcd.cpp b/Firmware/ultralcd.cpp
index a2420dc12..7776b79d2 100644
--- a/Firmware/ultralcd.cpp
+++ b/Firmware/ultralcd.cpp
@@ -672,8 +672,8 @@ void lcd_commands()
 		{
 			lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
 			enquecommand_P(PSTR("G1 Z0.250 F7200.000"));
-			enquecommand_P(PSTR("G1 X50.0 E80.0  F1000.0"));
-			enquecommand_P(PSTR("G1 X160.0 E20.0  F1000.0"));
+			enquecommand_P(PSTR("G1 X50.0 E80.0 F1000.0"));
+			enquecommand_P(PSTR("G1 X160.0 E20.0 F1000.0"));
 			enquecommand_P(PSTR("G1 Z0.200 F7200.000"));
 			enquecommand_P(PSTR("G1 X220.0 E13 F1000.0"));
 			enquecommand_P(PSTR("G1 X240.0 E0 F1000.0"));
@@ -732,7 +732,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 X50 Y");
@@ -742,7 +742,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 			}
@@ -761,7 +761,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 X50 Y");
@@ -771,7 +771,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 			}
@@ -790,7 +790,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 X50 Y");
@@ -800,7 +800,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 			}
@@ -819,7 +819,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 X50 Y");
@@ -829,7 +829,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 			}
@@ -840,7 +840,7 @@ void lcd_commands()
 		if (lcd_commands_step == 3 && !blocks_queued() && cmd_buffer_empty())
 		{
 			lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
-			enquecommand_P(PSTR("G1 E - 0.07500 F2100.00000"));
+			enquecommand_P(PSTR("G1 E-0.07500 F2100.00000"));
 			enquecommand_P(PSTR("G4 S0"));
 			enquecommand_P(PSTR("G1 E-4 F2100.00000"));
 			enquecommand_P(PSTR("G1 Z0.5 F7200.000"));
@@ -871,7 +871,7 @@ void lcd_commands()
 			enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
 			enquecommand_P(PSTR("G1 F2400"));
 			enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
-			enquecommand_P(PSTR("G1 X50 Y1 E - 5.0000"));
+			enquecommand_P(PSTR("G1 X50 Y1 E-5.0000"));
 			enquecommand_P(PSTR("G1 F2400"));
 			enquecommand_P(PSTR("G1 X0 Y1 E5.0000"));
 			enquecommand_P(PSTR("G1 X50 Y1 E-3.0000"));
@@ -931,8 +931,8 @@ void lcd_commands()
 			
 			lcd_implementation_clear();
 			lcd_goto_menu(lcd_babystep_z, 0, false);			
-			enquecommand_P(PSTR("G1 X60.0 E9.0  F1000.0")); //intro line
-			enquecommand_P(PSTR("G1 X100.0 E12.5  F1000.0")); //intro line			
+			enquecommand_P(PSTR("G1 X60.0 E9.0 F1000.0")); //intro line
+			enquecommand_P(PSTR("G1 X100.0 E12.5 F1000.0")); //intro line			
 			enquecommand_P(PSTR("G92 E0.0"));
 			enquecommand_P(PSTR("G21")); //set units to millimeters
 			enquecommand_P(PSTR("G90")); //use absolute coordinates
@@ -1002,7 +1002,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 X50 Y");
@@ -1012,7 +1012,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 			}
@@ -1031,7 +1031,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 X50 Y");
@@ -1041,7 +1041,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 			}
@@ -1060,7 +1060,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 X50 Y");
@@ -1070,7 +1070,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 			}
@@ -1089,7 +1089,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (2 * i + 1)*width));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 X50 Y");
@@ -1099,7 +1099,7 @@ void lcd_commands()
 				enquecommand(cmd1);
 				strcpy(cmd1, "G1 Y");
 				strcat(cmd1, ftostr32(35 - (i + 1)*width * 2));
-				strcat(cmd1, "E ");
+				strcat(cmd1, " E");
 				strcat(cmd1, ftostr43(extr_short_segment));
 				enquecommand(cmd1);
 			}
@@ -1110,7 +1110,7 @@ void lcd_commands()
 		if (lcd_commands_step == 2 && !blocks_queued() && cmd_buffer_empty())
 		{
 			lcd_timeoutToStatus = millis() + LCD_TIMEOUT_TO_STATUS;
-			enquecommand_P(PSTR("G1 E - 0.07500 F2100.00000"));
+			enquecommand_P(PSTR("G1 E-0.07500 F2100.00000"));
 			enquecommand_P(PSTR("M107")); //turn off printer fan
 			enquecommand_P(PSTR("M104 S0")); // turn off temperature
 			enquecommand_P(PSTR("M140 S0")); // turn off heatbed