Localization: Updated POT.

+ Changed a script of the merging new POT with existing PO files.
  Now it processes just a PO-files which are provided by community.

Community PO-files are updated from the new POT

1 files changed, 388 insertions, 363 deletions

diff --git a/resources/localization/en/PrusaSlicer_en.po b/resources/localization/en/PrusaSlicer_en.po
index 23e8b93b8..c70eeaf39 100644
--- a/resources/localization/en/PrusaSlicer_en.po
+++ b/resources/localization/en/PrusaSlicer_en.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-01-25 17:28+0100\n"
+"POT-Creation-Date: 2022-02-09 09:04+0100\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -543,7 +543,7 @@ msgstr ""
 msgid "PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1338
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:64 src/libslic3r/Preset.cpp:1339
 msgid "print"
 msgstr ""
 
@@ -551,17 +551,17 @@ msgstr ""
 msgid "filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1340
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:68 src/libslic3r/Preset.cpp:1341
 msgid "SLA print"
 msgstr ""
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
 #: src/slic3r/GUI/ConfigWizard.cpp:755 src/slic3r/GUI/GUI.cpp:340
-#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1341
+#: src/slic3r/GUI/Plater.cpp:820 src/libslic3r/Preset.cpp:1342
 msgid "SLA material"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1342
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:71 src/libslic3r/Preset.cpp:1343
 msgid "printer"
 msgstr ""
 
@@ -620,7 +620,7 @@ msgstr ""
 
 #: src/slic3r/GUI/ConfigWizard.cpp:331 src/slic3r/GUI/ConfigWizard.cpp:651
 #: src/slic3r/GUI/Preferences.cpp:434 src/slic3r/GUI/Tab.cpp:3816
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1153
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1154
 msgid "All"
 msgstr ""
 
@@ -705,7 +705,7 @@ msgstr ""
 msgid "All installed printers are compatible with the selected %1%."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1339
+#: src/slic3r/GUI/ConfigWizard.cpp:755 src/libslic3r/Preset.cpp:1340
 msgid "filament"
 msgstr ""
 
@@ -794,7 +794,7 @@ msgstr ""
 "an update is applied."
 
 #: src/slic3r/GUI/ConfigWizard.cpp:1243 src/slic3r/GUI/GUI_Factories.cpp:726
-#: src/slic3r/GUI/Plater.cpp:3548
+#: src/slic3r/GUI/Plater.cpp:3560
 msgid "Reload from disk"
 msgstr ""
 
@@ -1080,7 +1080,7 @@ msgstr ""
 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:58
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
 #: src/slic3r/GUI/SendSystemInfoDialog.cpp:93
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:878
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:879
 msgid "Cancel"
 msgstr ""
 
@@ -1144,7 +1144,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/DesktopIntegrationDialog.cpp:459
-#: src/slic3r/GUI/GUI_App.cpp:2223
+#: src/slic3r/GUI/GUI_App.cpp:2243
 msgid "Desktop Integration"
 msgstr ""
 
@@ -1591,8 +1591,8 @@ msgid "parameter name"
 msgstr ""
 
 #: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/OptionsGroup.cpp:827
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1078
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1067
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1079
 msgid "N/A"
 msgstr ""
 
@@ -1780,7 +1780,7 @@ msgstr ""
 msgid "Add selected shape(s) to the bed"
 msgstr ""
 
-#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4100
+#: src/slic3r/GUI/GalleryDialog.cpp:117 src/slic3r/GUI/Tab.cpp:4135
 msgid "Add"
 msgstr ""
 
@@ -1982,7 +1982,7 @@ msgid "Wipe"
 msgstr ""
 
 #: src/slic3r/GUI/GCodeViewer.cpp:3667 src/slic3r/GUI/GUI_Preview.cpp:257
-#: src/slic3r/GUI/GUI_Preview.cpp:272 src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/GUI_Preview.cpp:272
 msgid "Options"
 msgstr ""
 
@@ -2251,7 +2251,7 @@ msgid "Add..."
 msgstr ""
 
 #: src/slic3r/GUI/GLCanvas3D.cpp:4489 src/slic3r/GUI/KBShortcutsDialog.cpp:96
-#: src/slic3r/GUI/Plater.cpp:5463 src/slic3r/GUI/Tab.cpp:4106
+#: src/slic3r/GUI/Plater.cpp:5476 src/slic3r/GUI/Tab.cpp:4141
 msgid "Delete all"
 msgstr ""
 
@@ -3127,25 +3127,25 @@ msgstr ""
 msgid "Internal error: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:901 src/slic3r/GUI/GUI_App.cpp:999
+#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
 msgid ""
 "Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error. Your user profiles will "
 "not be affected."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:907 src/slic3r/GUI/GUI_App.cpp:1005
+#: src/slic3r/GUI/GUI_App.cpp:913 src/slic3r/GUI/GUI_App.cpp:1011
 msgid ""
 "Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
 "manually delete the file to recover from the error."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:960
 #, boost-format
 msgid "You are opening %1% version %2%."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:957
+#: src/slic3r/GUI/GUI_App.cpp:963
 #, boost-format
 msgid ""
 "The active configuration was created by <b>%1% %2%</b>,\n"
@@ -3157,7 +3157,7 @@ msgid ""
 "configuration."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:965
+#: src/slic3r/GUI/GUI_App.cpp:971
 #, boost-format
 msgid ""
 "An existing configuration was found in <b>%3%</b>\n"
@@ -3166,19 +3166,19 @@ msgid ""
 "Shall this configuration be imported?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:973
+#: src/slic3r/GUI/GUI_App.cpp:979
 msgid "Import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:974
+#: src/slic3r/GUI/GUI_App.cpp:980
 msgid "Don't import"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:982
+#: src/slic3r/GUI/GUI_App.cpp:988
 msgid "Continue and import newer configuration?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1043
+#: src/slic3r/GUI/GUI_App.cpp:1051
 msgid ""
 "You are running a 32 bit build of PrusaSlicer on 64-bit Windows.\n"
 "32 bit build of PrusaSlicer will likely not be able to utilize all the RAM "
@@ -3188,53 +3188,53 @@ msgid ""
 "Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1126
+#: src/slic3r/GUI/GUI_App.cpp:1134
 #, c-format, boost-format
 msgid ""
 "%s\n"
 "Do you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1128 src/slic3r/GUI/GUI_App.cpp:3070
-#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:888
+#: src/slic3r/GUI/GUI_App.cpp:1136 src/slic3r/GUI/GUI_App.cpp:3094
+#: src/slic3r/GUI/Plater.cpp:1728 src/slic3r/GUI/UnsavedChangesDialog.cpp:889
 msgid "Remember my choice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1170
+#: src/slic3r/GUI/GUI_App.cpp:1178
 msgid "Loading configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1203
+#: src/slic3r/GUI/GUI_App.cpp:1209
 #, boost-format
 msgid "New release version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1204
+#: src/slic3r/GUI/GUI_App.cpp:1210
 msgid "See Download page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1218
+#: src/slic3r/GUI/GUI_App.cpp:1224
 #, boost-format
 msgid "New prerelease version %1% is available."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1219
+#: src/slic3r/GUI/GUI_App.cpp:1225
 msgid "See Releases page."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1256
+#: src/slic3r/GUI/GUI_App.cpp:1262
 msgid "Preparing settings tabs"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1327 src/slic3r/GUI/Preferences.cpp:287
+#: src/slic3r/GUI/GUI_App.cpp:1334 src/slic3r/GUI/Preferences.cpp:287
 msgid "Restore window position on start"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1329
+#: src/slic3r/GUI/GUI_App.cpp:1336
 msgid "PrusaSlicer started after a crash"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1330
+#: src/slic3r/GUI/GUI_App.cpp:1337
 #, boost-format
 msgid ""
 "PrusaSlicer crashed last time when attempting to set window position.\n"
@@ -3247,291 +3247,291 @@ msgid ""
 "Otherwise, the application will most likely crash again next time."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1342
+#: src/slic3r/GUI/GUI_App.cpp:1349
 #, boost-format
 msgid "Disable \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1343
+#: src/slic3r/GUI/GUI_App.cpp:1350
 #, boost-format
 msgid "Leave \"%1%\" enabled"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1657
+#: src/slic3r/GUI/GUI_App.cpp:1677
 msgid ""
 "You have the following presets with saved options for \"Print Host upload\""
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1661
+#: src/slic3r/GUI/GUI_App.cpp:1681
 msgid ""
 "But since this version of PrusaSlicer we don't show this information in "
 "Printer Settings anymore.\n"
 "Settings will be available in physical printers settings."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1663
+#: src/slic3r/GUI/GUI_App.cpp:1683
 msgid ""
 "By default new Printer devices will be named as \"Printer N\" during its "
 "creation.\n"
 "Note: This name can be changed later from the physical printers settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1667 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
+#: src/slic3r/GUI/GUI_App.cpp:1687 src/slic3r/GUI/PhysicalPrinterDialog.cpp:722
 msgid "Information"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1680 src/slic3r/GUI/GUI_App.cpp:1691
+#: src/slic3r/GUI/GUI_App.cpp:1700 src/slic3r/GUI/GUI_App.cpp:1711
 msgid "Recreating"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1694
+#: src/slic3r/GUI/GUI_App.cpp:1714
 msgid "Loading of current presets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1699
+#: src/slic3r/GUI/GUI_App.cpp:1719
 msgid "Loading of a mode view"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1837
+#: src/slic3r/GUI/GUI_App.cpp:1857
 msgid "Choose one file (3MF/AMF):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1849
+#: src/slic3r/GUI/GUI_App.cpp:1869
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1861
+#: src/slic3r/GUI/GUI_App.cpp:1881
 msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1872
+#: src/slic3r/GUI/GUI_App.cpp:1892
 msgid "Changing of an application language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Select the language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2011
+#: src/slic3r/GUI/GUI_App.cpp:2031
 msgid "Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2160
+#: src/slic3r/GUI/GUI_App.cpp:2180
 msgid "modified"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2214
+#: src/slic3r/GUI/GUI_App.cpp:2234
 #, c-format, boost-format
 msgid "Run %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "&Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2218
+#: src/slic3r/GUI/GUI_App.cpp:2238
 msgid "Inspect / activate configuration snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Take Configuration &Snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2219
+#: src/slic3r/GUI/GUI_App.cpp:2239
 msgid "Capture a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for Configuration Updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2220
+#: src/slic3r/GUI/GUI_App.cpp:2240
 msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2227
+#: src/slic3r/GUI/GUI_App.cpp:2247
 msgid "&Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2233
+#: src/slic3r/GUI/GUI_App.cpp:2253
 msgid "Application preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2238 src/slic3r/GUI/wxExtensions.cpp:708
+#: src/slic3r/GUI/GUI_App.cpp:2258 src/slic3r/GUI/wxExtensions.cpp:708
 msgid "Simple"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2238
+#: src/slic3r/GUI/GUI_App.cpp:2258
 msgid "Simple View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2240 src/slic3r/GUI/wxExtensions.cpp:710
+#: src/slic3r/GUI/GUI_App.cpp:2260 src/slic3r/GUI/wxExtensions.cpp:710
 msgctxt "Mode"
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2240
+#: src/slic3r/GUI/GUI_App.cpp:2260
 msgid "Advanced View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2241 src/slic3r/GUI/wxExtensions.cpp:711
+#: src/slic3r/GUI/GUI_App.cpp:2261 src/slic3r/GUI/wxExtensions.cpp:711
 msgid "Expert"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2241
+#: src/slic3r/GUI/GUI_App.cpp:2261
 msgid "Expert View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 msgid "Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2246
+#: src/slic3r/GUI/GUI_App.cpp:2266
 #, c-format, boost-format
 msgid "%s View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2249
+#: src/slic3r/GUI/GUI_App.cpp:2269
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Flash Printer &Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2252
+#: src/slic3r/GUI/GUI_App.cpp:2272
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2272
+#: src/slic3r/GUI/GUI_App.cpp:2292
 msgid "Taking a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2273
+#: src/slic3r/GUI/GUI_App.cpp:2293
 msgid ""
 "Some presets are modified and the unsaved changes will not be captured by "
 "the configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2274
+#: src/slic3r/GUI/GUI_App.cpp:2294
 msgid "Snapshot name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2290
+#: src/slic3r/GUI/GUI_App.cpp:2310
 msgid "Loading a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2299
+#: src/slic3r/GUI/GUI_App.cpp:2319
 #, boost-format
 msgid "Continue to activate a configuration snapshot %1%?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2313
+#: src/slic3r/GUI/GUI_App.cpp:2333
 msgid "Failed to activate configuration snapshot."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2332
+#: src/slic3r/GUI/GUI_App.cpp:2352
 msgid "Restart application"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2366
+#: src/slic3r/GUI/GUI_App.cpp:2386
 msgid "Language selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2369
+#: src/slic3r/GUI/GUI_App.cpp:2389
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2371 src/slic3r/GUI/Preferences.cpp:582
+#: src/slic3r/GUI/GUI_App.cpp:2391 src/slic3r/GUI/Preferences.cpp:582
 msgid "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2398
+#: src/slic3r/GUI/GUI_App.cpp:2418
 msgid "&Configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2515 src/slic3r/GUI/GUI_App.cpp:2576
+#: src/slic3r/GUI/GUI_App.cpp:2535 src/slic3r/GUI/GUI_App.cpp:2596
 msgid "The preset modifications are successfully saved"
 msgid_plural "The presets modifications are successfully saved"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2579
+#: src/slic3r/GUI/GUI_App.cpp:2599
 msgid "For new project all modifications will be reseted"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2617
+#: src/slic3r/GUI/GUI_App.cpp:2637
 msgid "Loading a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Project is loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2620
+#: src/slic3r/GUI/GUI_App.cpp:2640
 msgid "Opening new project while some presets are unsaved."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "The uploads are still ongoing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2639
+#: src/slic3r/GUI/GUI_App.cpp:2659
 msgid "Stop them and continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2643
+#: src/slic3r/GUI/GUI_App.cpp:2663
 msgid "Ongoing uploads"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2849
+#: src/slic3r/GUI/GUI_App.cpp:2869
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2850 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
-#: src/slic3r/GUI/Plater.cpp:2427
+#: src/slic3r/GUI/GUI_App.cpp:2870 src/slic3r/GUI/Jobs/SLAImportJob.cpp:224
+#: src/slic3r/GUI/Plater.cpp:2439
 msgid "Please check your object list before preset changing."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2874
+#: src/slic3r/GUI/GUI_App.cpp:2894
 msgid "Configuration is editing from ConfigWizard"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:2899
+#: src/slic3r/GUI/GUI_App.cpp:2919
 msgid "Select a gcode file:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "Open hyperlink in default browser?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3069 src/slic3r/GUI/GUI_App.cpp:3092
+#: src/slic3r/GUI/GUI_App.cpp:3093 src/slic3r/GUI/GUI_App.cpp:3116
 msgid "PrusaSlicer: Open hyperlink"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3074 src/slic3r/GUI/Preferences.cpp:382
+#: src/slic3r/GUI/GUI_App.cpp:3098 src/slic3r/GUI/Preferences.cpp:382
 msgid "Suppress to open hyperlink in browser"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3076 src/slic3r/GUI/Plater.cpp:1734
+#: src/slic3r/GUI/GUI_App.cpp:3100 src/slic3r/GUI/Plater.cpp:1734
 msgid "PrusaSlicer will remember your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3077
+#: src/slic3r/GUI/GUI_App.cpp:3101
 msgid "You will not be asked about it again on hyperlinks hovering."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3078 src/slic3r/GUI/Plater.cpp:1738
+#: src/slic3r/GUI/GUI_App.cpp:3102 src/slic3r/GUI/Plater.cpp:1738
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to changes your choice."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:3080 src/slic3r/GUI/Plater.cpp:1740
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:905
+#: src/slic3r/GUI/GUI_App.cpp:3104 src/slic3r/GUI/Plater.cpp:1740
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:906
 msgid "PrusaSlicer: Don't ask me again"
 msgstr ""
 
@@ -3637,7 +3637,7 @@ msgstr ""
 #: src/slic3r/GUI/GUI_Factories.cpp:138 src/slic3r/GUI/Tab.cpp:1495
 #: src/slic3r/GUI/Tab.cpp:1528 src/slic3r/GUI/Tab.cpp:1645
 #: src/slic3r/GUI/Tab.cpp:1649 src/slic3r/GUI/Tab.cpp:2023
-#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4673
+#: src/slic3r/GUI/Tab.cpp:2393 src/slic3r/GUI/Tab.cpp:4712
 #: src/libslic3r/PrintConfig.cpp:247 src/libslic3r/PrintConfig.cpp:472
 #: src/libslic3r/PrintConfig.cpp:1396 src/libslic3r/PrintConfig.cpp:1483
 #: src/libslic3r/PrintConfig.cpp:1530 src/libslic3r/PrintConfig.cpp:2480
@@ -3647,7 +3647,7 @@ msgid "Advanced"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_Factories.cpp:140 src/slic3r/GUI/Plater.cpp:428
-#: src/slic3r/GUI/Tab.cpp:4607 src/slic3r/GUI/Tab.cpp:4608
+#: src/slic3r/GUI/Tab.cpp:4646 src/slic3r/GUI/Tab.cpp:4647
 #: src/libslic3r/PrintConfig.cpp:3418 src/libslic3r/PrintConfig.cpp:3425
 #: src/libslic3r/PrintConfig.cpp:3434 src/libslic3r/PrintConfig.cpp:3443
 #: src/libslic3r/PrintConfig.cpp:3453 src/libslic3r/PrintConfig.cpp:3463
@@ -3661,8 +3661,8 @@ msgid "Supports"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_Factories.cpp:141 src/slic3r/GUI/Plater.cpp:574
-#: src/slic3r/GUI/Tab.cpp:4648 src/slic3r/GUI/Tab.cpp:4649
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3606
+#: src/slic3r/GUI/Tab.cpp:4687 src/slic3r/GUI/Tab.cpp:4688
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3606
 #: src/libslic3r/PrintConfig.cpp:3613 src/libslic3r/PrintConfig.cpp:3627
 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3648
 #: src/libslic3r/PrintConfig.cpp:3670 src/libslic3r/PrintConfig.cpp:3681
@@ -3672,8 +3672,8 @@ msgstr ""
 msgid "Pad"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4666
-#: src/slic3r/GUI/Tab.cpp:4667 src/libslic3r/SLA/Hollowing.cpp:72
+#: src/slic3r/GUI/GUI_Factories.cpp:142 src/slic3r/GUI/Tab.cpp:4705
+#: src/slic3r/GUI/Tab.cpp:4706 src/libslic3r/SLA/Hollowing.cpp:72
 #: src/libslic3r/SLA/Hollowing.cpp:84 src/libslic3r/SLA/Hollowing.cpp:91
 #: src/libslic3r/SLA/Hollowing.cpp:100 src/libslic3r/PrintConfig.cpp:3734
 #: src/libslic3r/PrintConfig.cpp:3741 src/libslic3r/PrintConfig.cpp:3751
@@ -3776,7 +3776,7 @@ msgstr ""
 msgid "Reload the selected volumes from disk"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3534
+#: src/slic3r/GUI/GUI_Factories.cpp:733 src/slic3r/GUI/Plater.cpp:3546
 msgid "Replace with STL"
 msgstr ""
 
@@ -3802,19 +3802,19 @@ msgstr ""
 msgid "Scale the selected object to fit the print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5605
+#: src/slic3r/GUI/GUI_Factories.cpp:835 src/slic3r/GUI/Plater.cpp:5618
 msgid "Convert from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5606
+#: src/slic3r/GUI/GUI_Factories.cpp:836 src/slic3r/GUI/Plater.cpp:5619
 msgid "Revert conversion from imperial units"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:837 src/slic3r/GUI/Plater.cpp:5620
 msgid "Convert from meters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5607
+#: src/slic3r/GUI/GUI_Factories.cpp:838 src/slic3r/GUI/Plater.cpp:5620
 msgid "Revert conversion from meters"
 msgstr ""
 
@@ -4075,7 +4075,7 @@ msgstr ""
 msgid "Loading"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2399
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1540 src/slic3r/GUI/Plater.cpp:2400
 msgid "Loading file"
 msgstr ""
 
@@ -4494,7 +4494,7 @@ msgstr ""
 msgid "Delete Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:154
 #, c-format, boost-format
 msgid "Change Option %s"
 msgstr ""
@@ -4613,18 +4613,18 @@ msgstr ""
 msgid "Legend/Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:767
-#: src/slic3r/GUI/HintNotification.cpp:793
+#: src/slic3r/GUI/HintNotification.cpp:771
+#: src/slic3r/GUI/HintNotification.cpp:797
 #: src/slic3r/GUI/NotificationManager.cpp:374
 #: src/slic3r/GUI/NotificationManager.cpp:391
 msgid "More"
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:908
+#: src/slic3r/GUI/HintNotification.cpp:912
 msgid "Open Preferences."
 msgstr ""
 
-#: src/slic3r/GUI/HintNotification.cpp:1000
+#: src/slic3r/GUI/HintNotification.cpp:1004
 msgid "Open Documentation in web browser."
 msgstr ""
 
@@ -4784,11 +4784,11 @@ msgid ""
 "presets were used as fallback."
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2426
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:223 src/slic3r/GUI/Plater.cpp:2438
 msgid "You cannot load SLA project with a multi-part object on the bed"
 msgstr ""
 
-#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2428
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:225 src/slic3r/GUI/Plater.cpp:2440
 msgid "Attention!"
 msgstr ""
 
@@ -4829,11 +4829,11 @@ msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 src/slic3r/GUI/Plater.cpp:912
-#: src/slic3r/GUI/Plater.cpp:6492 src/libslic3r/PrintConfig.cpp:4271
+#: src/slic3r/GUI/Plater.cpp:6505 src/libslic3r/PrintConfig.cpp:4271
 msgid "Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:88 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send G-code"
 msgstr ""
 
@@ -5214,7 +5214,7 @@ msgstr ""
 msgid "Show/Hide G-code window"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4446
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230 src/slic3r/GUI/Plater.cpp:4458
 #: src/slic3r/GUI/Tab.cpp:2822
 msgid "Preview"
 msgstr ""
@@ -5326,29 +5326,29 @@ msgid "Closing PrusaSlicer while some presets are modified."
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:285 src/slic3r/GUI/MainFrame.cpp:335
-#: src/slic3r/GUI/Tab.hpp:414 src/slic3r/GUI/Tab.hpp:537
+#: src/slic3r/GUI/Tab.hpp:427 src/slic3r/GUI/Tab.hpp:550
 msgid "Print Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:339
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:522
+#: src/slic3r/GUI/Tab.hpp:535
 msgid "Material Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:286 src/slic3r/GUI/MainFrame.cpp:337
 #: src/slic3r/GUI/MainFrame.cpp:2096 src/slic3r/GUI/MainFrame.cpp:2097
-#: src/slic3r/GUI/Tab.hpp:448
+#: src/slic3r/GUI/Tab.hpp:461
 msgid "Filament Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:287 src/slic3r/GUI/MainFrame.cpp:341
-#: src/slic3r/GUI/Tab.hpp:490
+#: src/slic3r/GUI/Tab.hpp:503
 msgid "Printer Settings"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:632 src/slic3r/GUI/Plater.cpp:1721
-#: src/slic3r/GUI/Plater.cpp:2818
+#: src/slic3r/GUI/Plater.cpp:2830
 msgid "Untitled"
 msgstr ""
 
@@ -5858,7 +5858,7 @@ msgid "Open New Instance"
 msgstr ""
 
 #: src/slic3r/GUI/MainFrame.cpp:1417
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1562
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1564
 msgid "Compare Presets"
 msgstr ""
 
@@ -5967,9 +5967,9 @@ msgstr ""
 msgid "Save zip file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6011 src/slic3r/GUI/Tab.cpp:1666
-#: src/slic3r/GUI/Tab.cpp:4674
+#: src/slic3r/GUI/MainFrame.cpp:1682 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6024 src/slic3r/GUI/Tab.cpp:1666
+#: src/slic3r/GUI/Tab.cpp:4713
 msgid "Slicing"
 msgstr ""
 
@@ -6230,7 +6230,7 @@ msgstr ""
 #: src/slic3r/GUI/NotificationManager.cpp:1459
 #: src/slic3r/GUI/NotificationManager.cpp:1486
 #: src/slic3r/GUI/NotificationManager.cpp:1494
-#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3163
+#: src/slic3r/GUI/NotificationManager.cpp:1505 src/slic3r/GUI/Plater.cpp:3175
 msgid "WARNING:"
 msgstr ""
 
@@ -6256,8 +6256,8 @@ msgstr ""
 msgid "Instance %d"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4512
-#: src/slic3r/GUI/Tab.cpp:4603
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:105 src/slic3r/GUI/Tab.cpp:4551
+#: src/slic3r/GUI/Tab.cpp:4642
 msgid "Layers"
 msgstr ""
 
@@ -6513,12 +6513,12 @@ msgstr ""
 msgid "Around object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6493
+#: src/slic3r/GUI/Plater.cpp:893 src/slic3r/GUI/Plater.cpp:6506
 msgid "Send to printer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3295
-#: src/slic3r/GUI/Plater.cpp:6014
+#: src/slic3r/GUI/Plater.cpp:913 src/slic3r/GUI/Plater.cpp:3307
+#: src/slic3r/GUI/Plater.cpp:6027
 msgid "Slice now"
 msgstr ""
 
@@ -6625,7 +6625,7 @@ msgstr ""
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5074
+#: src/slic3r/GUI/Plater.cpp:2221 src/slic3r/GUI/Plater.cpp:5086
 msgid "New Project"
 msgstr ""
 
@@ -6633,7 +6633,7 @@ msgstr ""
 msgid "Expand sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2486
+#: src/slic3r/GUI/Plater.cpp:2498
 msgid ""
 "The preset below was temporarily installed on the active instance of "
 "PrusaSlicer"
@@ -6643,12 +6643,12 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2516
+#: src/slic3r/GUI/Plater.cpp:2528
 #, boost-format
 msgid "Failed loading file \"%1%\" due to an invalid configuration."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2536
+#: src/slic3r/GUI/Plater.cpp:2548
 #, c-format, boost-format
 msgid ""
 "Object size from file %s appears to be zero.\n"
@@ -6659,11 +6659,11 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2540
+#: src/slic3r/GUI/Plater.cpp:2552
 msgid "The size of the object is zero"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2553
+#: src/slic3r/GUI/Plater.cpp:2565
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in meters.\n"
@@ -6676,15 +6676,15 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2557 src/slic3r/GUI/Plater.cpp:2579
+#: src/slic3r/GUI/Plater.cpp:2569 src/slic3r/GUI/Plater.cpp:2591
 msgid "The object is too small"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2558 src/slic3r/GUI/Plater.cpp:2580
+#: src/slic3r/GUI/Plater.cpp:2570 src/slic3r/GUI/Plater.cpp:2592
 msgid "Apply to all the remaining small objects being loaded."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2575
+#: src/slic3r/GUI/Plater.cpp:2587
 #, c-format, boost-format
 msgid ""
 "The dimensions of the object from file %s seem to be defined in inches.\n"
@@ -6697,180 +6697,180 @@ msgid_plural ""
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2605
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should \n"
 "the file be loaded as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2596 src/slic3r/GUI/Plater.cpp:2651
+#: src/slic3r/GUI/Plater.cpp:2608 src/slic3r/GUI/Plater.cpp:2663
 msgid "Multi-part object detected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2604
+#: src/slic3r/GUI/Plater.cpp:2616
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2605
+#: src/slic3r/GUI/Plater.cpp:2617
 msgid "Detected advanced data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2625
+#: src/slic3r/GUI/Plater.cpp:2637
 #, c-format, boost-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
 "is(are) multi-part"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2648
+#: src/slic3r/GUI/Plater.cpp:2660
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2767
+#: src/slic3r/GUI/Plater.cpp:2779
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2768
+#: src/slic3r/GUI/Plater.cpp:2780
 msgid "Object too large?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2846
+#: src/slic3r/GUI/Plater.cpp:2858
 msgid "Export STL file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2853
+#: src/slic3r/GUI/Plater.cpp:2865
 msgid "Export AMF file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2859
+#: src/slic3r/GUI/Plater.cpp:2871
 msgid "Save file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2865
+#: src/slic3r/GUI/Plater.cpp:2877
 msgid "Export OBJ file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2963
+#: src/slic3r/GUI/Plater.cpp:2975
 msgid "Delete Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2975
+#: src/slic3r/GUI/Plater.cpp:2987
 msgid "Delete All Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3003
+#: src/slic3r/GUI/Plater.cpp:3015
 msgid "Reset Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3086
+#: src/slic3r/GUI/Plater.cpp:3098
 msgid ""
 "The selected object couldn't be split because it contains only one solid "
 "part."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3093
+#: src/slic3r/GUI/Plater.cpp:3105
 msgid "All non-solid parts (modifiers) were deleted"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3095
+#: src/slic3r/GUI/Plater.cpp:3107
 msgid "Split to Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3145
+#: src/slic3r/GUI/Plater.cpp:3157
 msgid ""
 "An object has custom support enforcers which will not be used because "
 "supports are disabled."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3147
+#: src/slic3r/GUI/Plater.cpp:3159
 msgid "Enable supports for enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3276 src/slic3r/GUI/Plater.cpp:4142
+#: src/slic3r/GUI/Plater.cpp:3288 src/slic3r/GUI/Plater.cpp:4154
 msgid "Invalid data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3346
+#: src/slic3r/GUI/Plater.cpp:3358
 msgid "Another export job is currently running."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3432
+#: src/slic3r/GUI/Plater.cpp:3444
 msgid "Replace from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450
+#: src/slic3r/GUI/Plater.cpp:3462
 msgid "Unable to replace with more than one volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3450 src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3462 src/slic3r/GUI/Plater.cpp:3541
 msgid "Error during replace"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3521
+#: src/slic3r/GUI/Plater.cpp:3533
 msgid "Select the new file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3529
+#: src/slic3r/GUI/Plater.cpp:3541
 msgid "File for the replace wasn't selected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3620
+#: src/slic3r/GUI/Plater.cpp:3632
 msgid "Please select the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3651 src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:3663 src/slic3r/GUI/Plater.cpp:5215
 msgid "The selected file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "differs from the original file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3652
+#: src/slic3r/GUI/Plater.cpp:3664
 msgid "Do you want to replace it"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3669 src/slic3r/GUI/Plater.cpp:3675
+#: src/slic3r/GUI/Plater.cpp:3681 src/slic3r/GUI/Plater.cpp:3687
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3778
+#: src/slic3r/GUI/Plater.cpp:3790
 msgid "Unable to reload:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3783
+#: src/slic3r/GUI/Plater.cpp:3795
 msgid "Error during reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3801
+#: src/slic3r/GUI/Plater.cpp:3813
 msgid "Reload all from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4096
+#: src/slic3r/GUI/Plater.cpp:4108
 msgid "There are active warnings concerning sliced models:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4107
+#: src/slic3r/GUI/Plater.cpp:4119
 msgid "generated warnings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4438
+#: src/slic3r/GUI/Plater.cpp:4450
 msgid "3D editor view"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4859
+#: src/slic3r/GUI/Plater.cpp:4871
 msgid "Undo / Redo is processing"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4861
+#: src/slic3r/GUI/Plater.cpp:4873
 #, boost-format
 msgid ""
 "Switching the printer technology from %1% to %2%.\n"
@@ -6878,171 +6878,171 @@ msgid ""
 "printer technology."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5058
+#: src/slic3r/GUI/Plater.cpp:5070
 msgid "Creating a new project while the current project is modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5061
+#: src/slic3r/GUI/Plater.cpp:5073
 msgid "Creating a new project while some presets are modified."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5074
 msgid "You can keep presets modifications to the new project or discard them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5063
+#: src/slic3r/GUI/Plater.cpp:5075
 msgid ""
 "You can keep presets modifications to the new project, discard them or save "
 "changes as new presets.\n"
 "Note, if changes will be saved then new project wouldn't keep them"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5069
+#: src/slic3r/GUI/Plater.cpp:5081
 msgid "Creating a new project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5100
+#: src/slic3r/GUI/Plater.cpp:5112
 msgid "Load Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5126 src/slic3r/GUI/Plater.cpp:5386
+#: src/slic3r/GUI/Plater.cpp:5139 src/slic3r/GUI/Plater.cpp:5399
 msgid "Import Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5130
+#: src/slic3r/GUI/Plater.cpp:5143
 msgid "Import Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5202
+#: src/slic3r/GUI/Plater.cpp:5215
 msgid "does not contain valid gcode."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5203
+#: src/slic3r/GUI/Plater.cpp:5216
 msgid "Error while loading .gcode file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5256
+#: src/slic3r/GUI/Plater.cpp:5269
 #, c-format, boost-format
 msgid "%s - Drop project file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5263
+#: src/slic3r/GUI/Plater.cpp:5276
 msgid "Open as project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5264
+#: src/slic3r/GUI/Plater.cpp:5277
 msgid "Import geometry only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5265
+#: src/slic3r/GUI/Plater.cpp:5278
 msgid "Import config only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5268
+#: src/slic3r/GUI/Plater.cpp:5281
 msgid "Select an action to apply to the file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5273
+#: src/slic3r/GUI/Plater.cpp:5286
 msgid "Action"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5289
+#: src/slic3r/GUI/Plater.cpp:5302
 msgid "Don't show again"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5330
+#: src/slic3r/GUI/Plater.cpp:5343
 msgid "You can open only one .gcode file at a time."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5331
+#: src/slic3r/GUI/Plater.cpp:5344
 msgid "Drag and drop G-code file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5408
+#: src/slic3r/GUI/Plater.cpp:5421
 msgid "Load File"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5413
+#: src/slic3r/GUI/Plater.cpp:5426
 msgid "Load Files"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5463
+#: src/slic3r/GUI/Plater.cpp:5476
 msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5474
+#: src/slic3r/GUI/Plater.cpp:5487
 msgid "Delete Selected Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5483
+#: src/slic3r/GUI/Plater.cpp:5496
 msgid "Increase Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5517
+#: src/slic3r/GUI/Plater.cpp:5530
 msgid "Decrease Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5568
+#: src/slic3r/GUI/Plater.cpp:5581
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5569
+#: src/slic3r/GUI/Plater.cpp:5582
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5573
+#: src/slic3r/GUI/Plater.cpp:5586
 #, c-format, boost-format
 msgid "Set numbers of copies to %d"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5647
+#: src/slic3r/GUI/Plater.cpp:5660
 msgid "Cut by Plane"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save G-code file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5707
+#: src/slic3r/GUI/Plater.cpp:5720
 msgid "Save SL1 / SL1S file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5716
+#: src/slic3r/GUI/Plater.cpp:5729
 msgid "The provided file name is not valid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5717
+#: src/slic3r/GUI/Plater.cpp:5730
 msgid "The following characters are not allowed by a FAT file system:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid ""
 "The plater is empty.\n"
 "Do you want to save the project?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5904
+#: src/slic3r/GUI/Plater.cpp:5917
 msgid "Save project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6492
+#: src/slic3r/GUI/Plater.cpp:6505
 msgid "Export"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6526
+#: src/slic3r/GUI/Plater.cpp:6539
 msgid ""
 "Custom supports, seams and multimaterial painting were removed after "
 "repairing the mesh."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:6640
+#: src/slic3r/GUI/Plater.cpp:6653
 msgid "Paste From Clipboard"
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:106 src/slic3r/GUI/Tab.cpp:2282
 #: src/slic3r/GUI/Tab.cpp:2508 src/slic3r/GUI/Tab.cpp:2614
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "General"
 msgstr ""
 
@@ -7159,7 +7159,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:233
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
 msgid ""
 "Ask to save unsaved changes in presets when closing the application or when "
 "loading a new project"
@@ -7173,7 +7173,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:242
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:896
 msgid "Ask for unsaved changes in presets when selecting new preset"
 msgstr ""
 
@@ -7184,7 +7184,7 @@ msgid ""
 msgstr ""
 
 #: src/slic3r/GUI/Preferences.cpp:249
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:894
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:895
 msgid "Ask for unsaved changes in presets when creating new project"
 msgstr ""
 
@@ -7687,11 +7687,11 @@ msgstr ""
 msgid "Upload to Printer Host with the following filename:"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:50
+#: src/slic3r/GUI/PrintHostDialogs.cpp:51
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:59
+#: src/slic3r/GUI/PrintHostDialogs.cpp:60
 msgid "Group"
 msgstr ""
 
@@ -7700,16 +7700,16 @@ msgstr ""
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:92
-msgid "Upload and Print"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:91
+msgid "Upload"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:103
-msgid "Upload and Simulate"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:101
+msgid "Upload and Print"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:115
-msgid "Upload"
+#: src/slic3r/GUI/PrintHostDialogs.cpp:112
+msgid "Upload and Simulate"
 msgstr ""
 
 #: src/slic3r/GUI/PrintHostDialogs.cpp:247
@@ -8147,7 +8147,7 @@ msgstr ""
 msgid "symbolic profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4601
+#: src/slic3r/GUI/Tab.cpp:1451 src/slic3r/GUI/Tab.cpp:4640
 msgid "Layers and perimeters"
 msgstr ""
 
@@ -8231,11 +8231,11 @@ msgstr ""
 msgid "Flow"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1704
+#: src/slic3r/GUI/Tab.cpp:1674 src/slic3r/GUI/Tab.cpp:1692
 msgid "Other"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4678
+#: src/slic3r/GUI/Tab.cpp:1677 src/slic3r/GUI/Tab.cpp:4717
 msgid "Output options"
 msgstr ""
 
@@ -8247,11 +8247,11 @@ msgstr ""
 msgid "Extruder clearance"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4679
+#: src/slic3r/GUI/Tab.cpp:1685 src/slic3r/GUI/Tab.cpp:4718
 msgid "Output file"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1692 src/libslic3r/PrintConfig.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:1704 src/libslic3r/PrintConfig.cpp:1992
 msgid "Post-processing scripts"
 msgstr ""
 
@@ -8259,19 +8259,20 @@ msgstr ""
 #: src/slic3r/GUI/Tab.cpp:2102 src/slic3r/GUI/Tab.cpp:2103
 #: src/slic3r/GUI/Tab.cpp:2489 src/slic3r/GUI/Tab.cpp:2490
 #: src/slic3r/GUI/Tab.cpp:2561 src/slic3r/GUI/Tab.cpp:2562
-#: src/slic3r/GUI/Tab.cpp:4529 src/slic3r/GUI/Tab.cpp:4530
+#: src/slic3r/GUI/Tab.cpp:3940 src/slic3r/GUI/Tab.cpp:4568
+#: src/slic3r/GUI/Tab.cpp:4569
 msgid "Notes"
 msgstr ""
 
 #: src/slic3r/GUI/Tab.cpp:1723 src/slic3r/GUI/Tab.cpp:2110
 #: src/slic3r/GUI/Tab.cpp:2496 src/slic3r/GUI/Tab.cpp:2568
-#: src/slic3r/GUI/Tab.cpp:4537 src/slic3r/GUI/Tab.cpp:4684
+#: src/slic3r/GUI/Tab.cpp:4576 src/slic3r/GUI/Tab.cpp:4723
 msgid "Dependencies"
 msgstr ""
 
 #: src/slic3r/GUI/Tab.cpp:1724 src/slic3r/GUI/Tab.cpp:2111
 #: src/slic3r/GUI/Tab.cpp:2497 src/slic3r/GUI/Tab.cpp:2569
-#: src/slic3r/GUI/Tab.cpp:4538 src/slic3r/GUI/Tab.cpp:4685
+#: src/slic3r/GUI/Tab.cpp:4577 src/slic3r/GUI/Tab.cpp:4724
 msgid "Profile dependencies"
 msgstr ""
 
@@ -8346,7 +8347,7 @@ msgid "Ramming settings"
 msgstr ""
 
 #: src/slic3r/GUI/Tab.cpp:2081 src/slic3r/GUI/Tab.cpp:2401
-#: src/slic3r/GUI/Tab.cpp:4208 src/libslic3r/GCode.cpp:733
+#: src/slic3r/GUI/Tab.cpp:4247 src/libslic3r/GCode.cpp:733
 #: src/libslic3r/PrintConfig.cpp:2450
 msgid "Custom G-code"
 msgstr ""
@@ -8384,8 +8385,8 @@ msgstr ""
 msgid "Size and coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1283
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1671
+#: src/slic3r/GUI/Tab.cpp:2292 src/slic3r/GUI/UnsavedChangesDialog.cpp:1285
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1673
 msgid "Capabilities"
 msgstr ""
 
@@ -8450,11 +8451,11 @@ msgstr ""
 msgid "Tilt time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4519
+#: src/slic3r/GUI/Tab.cpp:2538 src/slic3r/GUI/Tab.cpp:4558
 msgid "Corrections"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4515
+#: src/slic3r/GUI/Tab.cpp:2551 src/slic3r/GUI/Tab.cpp:4554
 msgid "Exposure"
 msgstr ""
 
@@ -8609,69 +8610,73 @@ msgstr ""
 msgid "%1% Preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4142
+#: src/slic3r/GUI/Tab.cpp:3819 src/slic3r/GUI/Tab.cpp:4181
 msgid "Set"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3938
 msgid "Find"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3906
+#: src/slic3r/GUI/Tab.cpp:3939
 msgid "Replace with"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3992
+#: src/slic3r/GUI/Tab.cpp:4028
 msgid "Regular expression"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3996
+#: src/slic3r/GUI/Tab.cpp:4032
 msgid "Case insensitive"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4000
+#: src/slic3r/GUI/Tab.cpp:4036
 msgid "Whole word"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4004
+#: src/slic3r/GUI/Tab.cpp:4040
 msgid "Match single line"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4236
+#: src/slic3r/GUI/Tab.cpp:4143
+msgid "Are you sure you want to delete all substitutions?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4275
 msgid ""
 "Machine limits will be emitted to G-code and used to estimate print time."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4239
+#: src/slic3r/GUI/Tab.cpp:4278
 msgid ""
 "Machine limits will NOT be emitted to G-code, however they will be used to "
 "estimate print time, which may therefore not be accurate as the printer may "
 "apply a different set of machine limits."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4243
+#: src/slic3r/GUI/Tab.cpp:4282
 msgid ""
 "Machine limits are not set, therefore the print time estimate may not be "
 "accurate."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4265
+#: src/slic3r/GUI/Tab.cpp:4304
 msgid "LOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4267
+#: src/slic3r/GUI/Tab.cpp:4306
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4269
+#: src/slic3r/GUI/Tab.cpp:4308
 msgid "UNLOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:4271
+#: src/slic3r/GUI/Tab.cpp:4310
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -8679,23 +8684,23 @@ msgid ""
 "to the system (or default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4276
+#: src/slic3r/GUI/Tab.cpp:4315
 msgid "WHITE BULLET"
 msgstr ""
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:4278
+#: src/slic3r/GUI/Tab.cpp:4317
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4281
+#: src/slic3r/GUI/Tab.cpp:4320
 msgid "BACK ARROW"
 msgstr ""
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:4283
+#: src/slic3r/GUI/Tab.cpp:4322
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -8703,13 +8708,13 @@ msgid ""
 "to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4293
+#: src/slic3r/GUI/Tab.cpp:4332
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4295
+#: src/slic3r/GUI/Tab.cpp:4334
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -8717,17 +8722,17 @@ msgid ""
 "default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4298
+#: src/slic3r/GUI/Tab.cpp:4337
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr "WHITE BULLET icon indicates a non-system (or non-default) preset."
 
-#: src/slic3r/GUI/Tab.cpp:4301
+#: src/slic3r/GUI/Tab.cpp:4340
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4303
+#: src/slic3r/GUI/Tab.cpp:4342
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -8735,131 +8740,131 @@ msgid ""
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4309
+#: src/slic3r/GUI/Tab.cpp:4348
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4310
+#: src/slic3r/GUI/Tab.cpp:4349
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
 "Click to reset current value to the system (or default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4316
+#: src/slic3r/GUI/Tab.cpp:4355
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4317
+#: src/slic3r/GUI/Tab.cpp:4356
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
 "Click to reset current value to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4471 src/slic3r/GUI/Tab.cpp:4473
+#: src/slic3r/GUI/Tab.cpp:4510 src/slic3r/GUI/Tab.cpp:4512
 msgid "Material"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4558 src/slic3r/GUI/Tab.cpp:4559
+#: src/slic3r/GUI/Tab.cpp:4597 src/slic3r/GUI/Tab.cpp:4598
 msgid "Material printing profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4611
+#: src/slic3r/GUI/Tab.cpp:4650
 msgid "Support head"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4616
+#: src/slic3r/GUI/Tab.cpp:4655
 msgid "Support pillar"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4639
+#: src/slic3r/GUI/Tab.cpp:4678
 msgid "Connection of the support sticks and junctions"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4644
+#: src/slic3r/GUI/Tab.cpp:4683
 msgid "Automatic generation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4719
+#: src/slic3r/GUI/Tab.cpp:4758
 #, boost-format
 msgid ""
 "\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
 "To enable \"%1%\", please switch off \"%2%\""
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3578
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3578
 msgid "Object elevation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:4721 src/libslic3r/PrintConfig.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4760 src/libslic3r/PrintConfig.cpp:3680
 msgid "Pad around object"
 msgstr ""
 
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:153
 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:162
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1046
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1099
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1114
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1129
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1144
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1047
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1100
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1115
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1130
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1145
 msgid "Undef"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:771
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:772
 msgid "Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:789
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:790
 msgid "Switching Presets: Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:831
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
 msgid "Old Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:832
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:833
 msgid "New Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:866
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:867
 msgid "Keep"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:863
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:864
 msgid "Transfer"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Don't save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:870
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:871
 msgid "Discard"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:876
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:877
 msgid "Save"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:897
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "create new project"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:898
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time you "
 "switch a preset"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:899
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:900
 msgid ""
 "You will not be asked about the unsaved changes in presets the next time "
 "you: \n"
@@ -8867,121 +8872,122 @@ msgid ""
 "- Loading a new project while some presets are modified"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:902
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
 msgid "PrusaSlicer will remember your action."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:903
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:904
 #, boost-format
 msgid ""
 "Visit \"Preferences\" and check \"%1%\"\n"
 "to be asked about unsaved changes again."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:935
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:936
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1695
 msgid ""
 "Some fields are too long to fit. Right mouse click reveals the full text."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will not be saved"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:937
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:938
 msgid "All settings changes will be discarded."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:940
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
 msgid "Save the selected options."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:941
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
 msgid "Keep the selected settings."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:942
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:943
 msgid "Transfer the selected settings to the newly selected preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:946
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
 #, boost-format
 msgid "Save the selected options to preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:947
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:948
 #, boost-format
 msgid "Transfer the selected options to the newly selected preset \"%1%\"."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1222
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1224
 msgid "The following preset was modified"
 msgid_plural "The following presets were modified"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1228
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1230
 #, boost-format
 msgid "Preset \"%1%\" has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1232
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1234
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new printer profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1233
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1235
 #, boost-format
 msgid ""
 "Preset \"%1%\" is not compatible with the new print profile and it has the "
 "following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1279
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1667
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1281
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1669
 msgid "Extruders count"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1452
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1454
 msgid "Select presets to compare"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1501
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1503
 msgid "Show all presets (including incompatible)"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1516
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1518
 msgid "Left Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1517
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1519
 msgid "Right Preset Value"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1624
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1626
 msgid "One of the presets doesn't found"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1635
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1637
 msgid "Compared presets has different printer technology"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1649
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1651
 msgid "Presets are the same"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1657
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1659
 msgid ""
 "Presets are different.\n"
 "Click this button to select the same preset for the right and left preset."
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef category"
 msgstr ""
 
-#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1681
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1683
 msgid "Undef group"
 msgstr ""
 
@@ -9743,116 +9749,116 @@ msgstr ""
 msgid "write calledback failed"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:449
+#: src/libslic3r/Print.cpp:451
 msgid "All objects are outside of the print volume."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:452
+#: src/libslic3r/Print.cpp:454
 msgid "The supplied settings will cause an empty print."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:456
+#: src/libslic3r/Print.cpp:458
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:458
+#: src/libslic3r/Print.cpp:460
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:467
+#: src/libslic3r/Print.cpp:469
 msgid ""
 "Only a single object may be printed at a time in Spiral Vase mode. Either "
 "remove all but the last object, or enable sequential mode by "
 "\"complete_objects\"."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:471
+#: src/libslic3r/Print.cpp:473
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:484
+#: src/libslic3r/Print.cpp:486
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:490
+#: src/libslic3r/Print.cpp:492
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:492
+#: src/libslic3r/Print.cpp:494
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:494
+#: src/libslic3r/Print.cpp:496
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:496
+#: src/libslic3r/Print.cpp:498
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:498
+#: src/libslic3r/Print.cpp:500
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:519
+#: src/libslic3r/Print.cpp:521
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:521
+#: src/libslic3r/Print.cpp:523
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:524
+#: src/libslic3r/Print.cpp:526
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:526
+#: src/libslic3r/Print.cpp:528
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:539
+#: src/libslic3r/Print.cpp:541
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:561
+#: src/libslic3r/Print.cpp:563
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 "One or more objects were assigned an extruder that the printer does not have."
 
-#: src/libslic3r/Print.cpp:574
+#: src/libslic3r/Print.cpp:576
 #, boost-format
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:577
+#: src/libslic3r/Print.cpp:579
 #, boost-format
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:588
+#: src/libslic3r/Print.cpp:590
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -9860,13 +9866,13 @@ msgid ""
 "same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:596
+#: src/libslic3r/Print.cpp:598
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:600
+#: src/libslic3r/Print.cpp:602
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -9874,27 +9880,46 @@ msgid ""
 "set to 0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:636
+#: src/libslic3r/Print.cpp:638
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:641
+#: src/libslic3r/Print.cpp:643
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:795
+#: src/libslic3r/Print.cpp:663
+msgid ""
+"Relative extruder addressing requires resetting the extruder position at "
+"each layer to prevent loss of floating point accuracy. Add \"G92 E0\" to "
+"layer_gcode."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:665
+msgid ""
+"\"G92 E0\" was found in before_layer_gcode, which is incompatible with "
+"absolute extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:667
+msgid ""
+"\"G92 E0\" was found in layer_gcode, which is incompatible with absolute "
+"extruder addressing."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:809
 msgid "Infilling layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:817
+#: src/libslic3r/Print.cpp:831
 msgid "Generating skirt and brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:865
+#: src/libslic3r/Print.cpp:879
 msgid "Exporting G-code"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:869
+#: src/libslic3r/Print.cpp:883
 msgid "Generating G-code"
 msgstr ""