Some more localization improvements.

1 files changed, 1728 insertions, 1509 deletions

diff --git a/resources/localization/Slic3rPE.pot b/resources/localization/Slic3rPE.pot
index be2a344c9..e2f4a6ec2 100644
--- a/resources/localization/Slic3rPE.pot
+++ b/resources/localization/Slic3rPE.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-05-04 01:38+0200\n"
+"POT-Creation-Date: 2019-05-09 19:23+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -22,10 +22,30 @@ msgstr ""
 msgid "About %s"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:67 src/slic3r/GUI/MainFrame.cpp:53
+#: src/slic3r/GUI/AboutDialog.cpp:67 src/slic3r/GUI/MainFrame.cpp:59
 msgid "Version"
 msgstr ""
 
+#: src/slic3r/GUI/AboutDialog.cpp:92
+msgid "Copyright"
+msgstr ""
+
+#. TRN "Slic3r _is licensed under the_ License"
+#: src/slic3r/GUI/AboutDialog.cpp:94
+msgid "is licensed under the"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:95
+msgid "GNU Affero General Public License, version 3"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:96
+msgid ""
+"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
+"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
+"numerous others."
+msgstr ""
+
 #: src/slic3r/GUI/BedShapeDialog.cpp:60
 msgid "Shape"
 msgstr ""
@@ -35,8 +55,8 @@ msgid "Rectangular"
 msgstr ""
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:72
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153 src/slic3r/GUI/Plater.cpp:137
-#: src/slic3r/GUI/Tab.cpp:2257
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:137
+#: src/slic3r/GUI/Tab.cpp:2258
 msgid "Size"
 msgstr ""
 
@@ -59,38 +79,38 @@ msgid "Circular"
 msgstr ""
 
 #: src/slic3r/GUI/BedShapeDialog.cpp:87 src/slic3r/GUI/ConfigWizard.cpp:118
-#: src/slic3r/GUI/ConfigWizard.cpp:561 src/slic3r/GUI/ConfigWizard.cpp:575
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:150
+#: src/slic3r/GUI/ConfigWizard.cpp:565 src/slic3r/GUI/ConfigWizard.cpp:579
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:229
 #: src/slic3r/GUI/RammingChart.cpp:81 src/slic3r/GUI/WipeTowerDialog.cpp:84
-#: src/libslic3r/PrintConfig.cpp:59 src/libslic3r/PrintConfig.cpp:66
-#: src/libslic3r/PrintConfig.cpp:75 src/libslic3r/PrintConfig.cpp:210
-#: src/libslic3r/PrintConfig.cpp:285 src/libslic3r/PrintConfig.cpp:293
-#: src/libslic3r/PrintConfig.cpp:343 src/libslic3r/PrintConfig.cpp:353
-#: src/libslic3r/PrintConfig.cpp:473 src/libslic3r/PrintConfig.cpp:484
-#: src/libslic3r/PrintConfig.cpp:502 src/libslic3r/PrintConfig.cpp:680
-#: src/libslic3r/PrintConfig.cpp:1166 src/libslic3r/PrintConfig.cpp:1227
-#: src/libslic3r/PrintConfig.cpp:1245 src/libslic3r/PrintConfig.cpp:1263
-#: src/libslic3r/PrintConfig.cpp:1315 src/libslic3r/PrintConfig.cpp:1325
-#: src/libslic3r/PrintConfig.cpp:1446 src/libslic3r/PrintConfig.cpp:1454
-#: src/libslic3r/PrintConfig.cpp:1495 src/libslic3r/PrintConfig.cpp:1503
-#: src/libslic3r/PrintConfig.cpp:1513 src/libslic3r/PrintConfig.cpp:1521
-#: src/libslic3r/PrintConfig.cpp:1529 src/libslic3r/PrintConfig.cpp:1612
-#: src/libslic3r/PrintConfig.cpp:1828 src/libslic3r/PrintConfig.cpp:1898
-#: src/libslic3r/PrintConfig.cpp:1932 src/libslic3r/PrintConfig.cpp:2125
-#: src/libslic3r/PrintConfig.cpp:2132 src/libslic3r/PrintConfig.cpp:2139
-#: src/libslic3r/PrintConfig.cpp:2169 src/libslic3r/PrintConfig.cpp:2179
-#: src/libslic3r/PrintConfig.cpp:2189 src/libslic3r/PrintConfig.cpp:2297
-#: src/libslic3r/PrintConfig.cpp:2372 src/libslic3r/PrintConfig.cpp:2381
-#: src/libslic3r/PrintConfig.cpp:2390 src/libslic3r/PrintConfig.cpp:2400
-#: src/libslic3r/PrintConfig.cpp:2444 src/libslic3r/PrintConfig.cpp:2454
-#: src/libslic3r/PrintConfig.cpp:2473 src/libslic3r/PrintConfig.cpp:2483
-#: src/libslic3r/PrintConfig.cpp:2492 src/libslic3r/PrintConfig.cpp:2510
-#: src/libslic3r/PrintConfig.cpp:2525 src/libslic3r/PrintConfig.cpp:2539
-#: src/libslic3r/PrintConfig.cpp:2552 src/libslic3r/PrintConfig.cpp:2562
+#: src/libslic3r/PrintConfig.cpp:60 src/libslic3r/PrintConfig.cpp:67
+#: src/libslic3r/PrintConfig.cpp:76 src/libslic3r/PrintConfig.cpp:211
+#: src/libslic3r/PrintConfig.cpp:286 src/libslic3r/PrintConfig.cpp:294
+#: src/libslic3r/PrintConfig.cpp:344 src/libslic3r/PrintConfig.cpp:354
+#: src/libslic3r/PrintConfig.cpp:474 src/libslic3r/PrintConfig.cpp:485
+#: src/libslic3r/PrintConfig.cpp:503 src/libslic3r/PrintConfig.cpp:681
+#: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1252
+#: src/libslic3r/PrintConfig.cpp:1270 src/libslic3r/PrintConfig.cpp:1288
+#: src/libslic3r/PrintConfig.cpp:1340 src/libslic3r/PrintConfig.cpp:1350
+#: src/libslic3r/PrintConfig.cpp:1471 src/libslic3r/PrintConfig.cpp:1479
+#: src/libslic3r/PrintConfig.cpp:1520 src/libslic3r/PrintConfig.cpp:1528
+#: src/libslic3r/PrintConfig.cpp:1538 src/libslic3r/PrintConfig.cpp:1546
+#: src/libslic3r/PrintConfig.cpp:1554 src/libslic3r/PrintConfig.cpp:1637
+#: src/libslic3r/PrintConfig.cpp:1853 src/libslic3r/PrintConfig.cpp:1923
+#: src/libslic3r/PrintConfig.cpp:1957 src/libslic3r/PrintConfig.cpp:2150
+#: src/libslic3r/PrintConfig.cpp:2157 src/libslic3r/PrintConfig.cpp:2164
+#: src/libslic3r/PrintConfig.cpp:2194 src/libslic3r/PrintConfig.cpp:2204
+#: src/libslic3r/PrintConfig.cpp:2214 src/libslic3r/PrintConfig.cpp:2322
+#: src/libslic3r/PrintConfig.cpp:2397 src/libslic3r/PrintConfig.cpp:2406
+#: src/libslic3r/PrintConfig.cpp:2415 src/libslic3r/PrintConfig.cpp:2425
+#: src/libslic3r/PrintConfig.cpp:2469 src/libslic3r/PrintConfig.cpp:2479
+#: src/libslic3r/PrintConfig.cpp:2498 src/libslic3r/PrintConfig.cpp:2508
+#: src/libslic3r/PrintConfig.cpp:2517 src/libslic3r/PrintConfig.cpp:2535
+#: src/libslic3r/PrintConfig.cpp:2550 src/libslic3r/PrintConfig.cpp:2564
+#: src/libslic3r/PrintConfig.cpp:2577 src/libslic3r/PrintConfig.cpp:2587
 msgid "mm"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:88 src/libslic3r/PrintConfig.cpp:677
+#: src/slic3r/GUI/BedShapeDialog.cpp:88 src/libslic3r/PrintConfig.cpp:678
 msgid "Diameter"
 msgstr ""
 
@@ -117,7 +137,7 @@ msgstr ""
 msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/GUI_ObjectList.cpp:1431
+#: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/GUI_ObjectList.cpp:1443
 msgid "Error! "
 msgstr ""
 
@@ -130,7 +150,7 @@ msgid ""
 "The selected file contains several disjoint areas. This is not supported."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.hpp:45 src/slic3r/GUI/ConfigWizard.cpp:524
+#: src/slic3r/GUI/BedShapeDialog.hpp:45 src/slic3r/GUI/ConfigWizard.cpp:530
 msgid "Bed Shape"
 msgstr ""
 
@@ -166,11 +186,11 @@ msgstr ""
 msgid "Buttons And Text Colors Description"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:41
+#: src/slic3r/GUI/ButtonsDescription.cpp:36
 msgid "Value is the same as the system value"
 msgstr ""
 
-#: src/slic3r/GUI/ButtonsDescription.cpp:58
+#: src/slic3r/GUI/ButtonsDescription.cpp:53
 msgid ""
 "Value was changed and is not equal to the system value or the last saved "
 "preset"
@@ -216,7 +236,7 @@ msgstr ""
 msgid "printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 src/slic3r/GUI/Tab.cpp:921
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 src/slic3r/GUI/Tab.cpp:929
 msgid "vendor"
 msgstr ""
 
@@ -265,76 +285,81 @@ msgstr ""
 msgid "All standard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:189 src/slic3r/GUI/Tab.cpp:2986
+#: src/slic3r/GUI/ConfigWizard.cpp:189 src/slic3r/GUI/Tab.cpp:2987
 msgid "All"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:190 src/slic3r/GUI/Plater.cpp:422
+#: src/slic3r/GUI/ConfigWizard.cpp:190 src/slic3r/GUI/Plater.cpp:433
 #: src/libslic3r/GCode/PreviewData.cpp:162
 msgid "None"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:294
+#: src/slic3r/GUI/ConfigWizard.cpp:296
+#, possible-c-format
+msgid "Welcome to the %s Configuration Assistant"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:298
 #, possible-c-format
-msgid "Welcome to the %s %s"
+msgid "Welcome to the %s Configuration Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:294
+#: src/slic3r/GUI/ConfigWizard.cpp:300
 msgid "Welcome"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:298 src/slic3r/GUI/GUI_App.cpp:658
+#: src/slic3r/GUI/ConfigWizard.cpp:304 src/slic3r/GUI/GUI_App.cpp:670
 #, possible-c-format
 msgid "Run %s"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:300
+#: src/slic3r/GUI/ConfigWizard.cpp:306
 #, possible-c-format
 msgid ""
 "Hello, welcome to %s! This %s helps you with the initial configuration; just "
 "a few settings and you will be ready to print."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:305
+#: src/slic3r/GUI/ConfigWizard.cpp:311
 msgid ""
 "Remove user profiles - install from scratch (a snapshot will be taken "
 "beforehand)"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:336
+#: src/slic3r/GUI/ConfigWizard.cpp:342
 #, possible-c-format
 msgid "%s Family"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:373
+#: src/slic3r/GUI/ConfigWizard.cpp:379
 msgid "Custom Printer Setup"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:373
+#: src/slic3r/GUI/ConfigWizard.cpp:379
 msgid "Custom Printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:375
+#: src/slic3r/GUI/ConfigWizard.cpp:381
 msgid "Define a custom printer profile"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:377
+#: src/slic3r/GUI/ConfigWizard.cpp:383
 msgid "Custom profile name:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:401
+#: src/slic3r/GUI/ConfigWizard.cpp:407
 msgid "Automatic updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:401
+#: src/slic3r/GUI/ConfigWizard.cpp:407
 msgid "Updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:409 src/slic3r/GUI/Preferences.cpp:61
+#: src/slic3r/GUI/ConfigWizard.cpp:415 src/slic3r/GUI/Preferences.cpp:61
 msgid "Check for application updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:413
+#: src/slic3r/GUI/ConfigWizard.cpp:419
 #, possible-c-format
 msgid ""
 "If enabled, %s checks for new application versions online. When a new "
@@ -343,11 +368,11 @@ msgid ""
 "notification mechanisms, no automatic installation is done."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:419 src/slic3r/GUI/Preferences.cpp:69
+#: src/slic3r/GUI/ConfigWizard.cpp:425 src/slic3r/GUI/Preferences.cpp:69
 msgid "Update built-in Presets automatically"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:423
+#: src/slic3r/GUI/ConfigWizard.cpp:429
 #, possible-c-format
 msgid ""
 "If enabled, %s downloads updates of built-in system presets in the "
@@ -356,185 +381,185 @@ msgid ""
 "startup."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:426
+#: src/slic3r/GUI/ConfigWizard.cpp:432
 msgid ""
 "Updates are never applied without user's consent and never overwrite user's "
 "customized settings."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:431
+#: src/slic3r/GUI/ConfigWizard.cpp:437
 msgid ""
 "Additionally a backup snapshot of the whole configuration is created before "
 "an update is applied."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:438
+#: src/slic3r/GUI/ConfigWizard.cpp:444
 msgid "Other Vendors"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:440
+#: src/slic3r/GUI/ConfigWizard.cpp:446
 #, possible-c-format
 msgid "Pick another vendor supported by %s:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:486
+#: src/slic3r/GUI/ConfigWizard.cpp:492
 msgid "Firmware Type"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:486 src/slic3r/GUI/Tab.cpp:1920
+#: src/slic3r/GUI/ConfigWizard.cpp:492 src/slic3r/GUI/Tab.cpp:1921
 msgid "Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:490
+#: src/slic3r/GUI/ConfigWizard.cpp:496
 msgid "Choose the type of firmware used by your printer."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:524
+#: src/slic3r/GUI/ConfigWizard.cpp:530
 msgid "Bed Shape and Size"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:527
+#: src/slic3r/GUI/ConfigWizard.cpp:533
 msgid "Set the shape of your printer's bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:541
+#: src/slic3r/GUI/ConfigWizard.cpp:547
 msgid "Filament and Nozzle Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:541
+#: src/slic3r/GUI/ConfigWizard.cpp:547
 msgid "Print Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:557
+#: src/slic3r/GUI/ConfigWizard.cpp:561
 msgid "Enter the diameter of your printer's hot end nozzle."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:560
+#: src/slic3r/GUI/ConfigWizard.cpp:564
 msgid "Nozzle Diameter:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:570
+#: src/slic3r/GUI/ConfigWizard.cpp:574
 msgid "Enter the diameter of your filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:571
+#: src/slic3r/GUI/ConfigWizard.cpp:575
 msgid ""
 "Good precision is required, so use a caliper and do multiple measurements "
 "along the filament, then compute the average."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:574
+#: src/slic3r/GUI/ConfigWizard.cpp:578
 msgid "Filament Diameter:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:592
+#: src/slic3r/GUI/ConfigWizard.cpp:596
 msgid "Extruder and Bed Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:592
+#: src/slic3r/GUI/ConfigWizard.cpp:596
 msgid "Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:608
+#: src/slic3r/GUI/ConfigWizard.cpp:612
 msgid "Enter the temperature needed for extruding your filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:609
+#: src/slic3r/GUI/ConfigWizard.cpp:613
 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:612
+#: src/slic3r/GUI/ConfigWizard.cpp:616
 msgid "Extrusion Temperature:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:613 src/slic3r/GUI/ConfigWizard.cpp:627
+#: src/slic3r/GUI/ConfigWizard.cpp:617 src/slic3r/GUI/ConfigWizard.cpp:631
 msgid "°C"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:622
+#: src/slic3r/GUI/ConfigWizard.cpp:626
 msgid ""
 "Enter the bed temperature needed for getting your filament to stick to your "
 "heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:623
+#: src/slic3r/GUI/ConfigWizard.cpp:627
 msgid ""
 "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
 "no heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:626
+#: src/slic3r/GUI/ConfigWizard.cpp:630
 msgid "Bed Temperature:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1089
+#: src/slic3r/GUI/ConfigWizard.cpp:1093
 msgid "Select all standard printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1092
+#: src/slic3r/GUI/ConfigWizard.cpp:1096
 msgid "< &Back"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1093
+#: src/slic3r/GUI/ConfigWizard.cpp:1097
 msgid "&Next >"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1094
+#: src/slic3r/GUI/ConfigWizard.cpp:1098
 msgid "&Finish"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1095 src/slic3r/GUI/FirmwareDialog.cpp:147
+#: src/slic3r/GUI/ConfigWizard.cpp:1099 src/slic3r/GUI/FirmwareDialog.cpp:147
 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:37
 #: src/slic3r/GUI/ProgressStatusBar.cpp:28
 msgid "Cancel"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1109
+#: src/slic3r/GUI/ConfigWizard.cpp:1113
 msgid "Prusa FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1112
+#: src/slic3r/GUI/ConfigWizard.cpp:1116
 msgid "Prusa MSLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1181
-msgid "Configuration Wizard"
+#: src/slic3r/GUI/ConfigWizard.cpp:1185
+msgid "Configuration Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1182
-msgid "Configuration &Wizard"
+#: src/slic3r/GUI/ConfigWizard.cpp:1186
+msgid "Configuration &Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1184
-msgid "Configuration Assistant"
+#: src/slic3r/GUI/ConfigWizard.cpp:1188
+msgid "Configuration Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1185
-msgid "Configuration &Assistant"
+#: src/slic3r/GUI/ConfigWizard.cpp:1189
+msgid "Configuration &Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:105
+#: src/slic3r/GUI/Field.cpp:93
 msgid "default value"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:108
+#: src/slic3r/GUI/Field.cpp:96
 msgid "parameter name"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:136
+#: src/slic3r/GUI/Field.cpp:124
 #, possible-c-format
 msgid "%s doesn't support percentage"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:150 src/slic3r/GUI/Field.cpp:173
+#: src/slic3r/GUI/Field.cpp:138 src/slic3r/GUI/Field.cpp:161
 msgid "Invalid numeric input."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:155
+#: src/slic3r/GUI/Field.cpp:143
 msgid "Input value is out of range"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:181
+#: src/slic3r/GUI/Field.cpp:169
 #, possible-c-format
 msgid ""
 "Do you mean %d%% instead of %d %s?\n"
@@ -542,7 +567,7 @@ msgid ""
 "or NO if you are sure that %d %s is a correct value."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:184
+#: src/slic3r/GUI/Field.cpp:172
 msgid "Parameter validation"
 msgstr ""
 
@@ -618,50 +643,54 @@ msgstr ""
 msgid "Firmware image:"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:769
+#: src/slic3r/GUI/FirmwareDialog.cpp:768 src/slic3r/GUI/Tab.cpp:1682
+msgid "Browse"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:770
 msgid "Serial port:"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:771
+#: src/slic3r/GUI/FirmwareDialog.cpp:772
 msgid "Autodetected"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:772
+#: src/slic3r/GUI/FirmwareDialog.cpp:773
 msgid "Rescan"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:779
+#: src/slic3r/GUI/FirmwareDialog.cpp:780
 msgid "Progress:"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:782
+#: src/slic3r/GUI/FirmwareDialog.cpp:783
 msgid "Status:"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:783
+#: src/slic3r/GUI/FirmwareDialog.cpp:784
 msgid "Ready"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:803
+#: src/slic3r/GUI/FirmwareDialog.cpp:804
 msgid "Advanced: Output log"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:814
+#: src/slic3r/GUI/FirmwareDialog.cpp:815
 #: src/slic3r/GUI/PrintHostDialogs.cpp:160
 msgid "Close"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:862
+#: src/slic3r/GUI/FirmwareDialog.cpp:863
 msgid ""
 "Are you sure you want to cancel firmware flashing?\n"
 "This could leave your printer in an unusable state!"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:863
+#: src/slic3r/GUI/FirmwareDialog.cpp:864
 msgid "Confirmation"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:866
+#: src/slic3r/GUI/FirmwareDialog.cpp:867
 msgid "Cancelling..."
 msgstr ""
 
@@ -683,6 +712,52 @@ msgid ""
 "Resolve a clash to continue slicing/export process correctly"
 msgstr ""
 
+#: src/slic3r/GUI/GLCanvas3D.cpp:3392
+msgid "Add..."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3402 src/slic3r/GUI/GUI_ObjectList.cpp:1269
+#: src/slic3r/GUI/Plater.cpp:2908 src/slic3r/GUI/Plater.cpp:2926
+#: src/slic3r/GUI/Tab.cpp:2938
+msgid "Delete"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3413 src/slic3r/GUI/Plater.cpp:3316
+msgid "Delete all"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3424 src/slic3r/GUI/KBShortcutsDialog.cpp:135
+msgid "Arrange"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3438 src/slic3r/GUI/Tab.cpp:2879
+msgid "Copy"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3449
+msgid "Paste"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3463
+msgid "Add instance"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3475
+msgid "Remove instance"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3490
+msgid "Split to objects"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3502 src/slic3r/GUI/GUI_ObjectList.cpp:1122
+msgid "Split to parts"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3517
+msgid "Layers editing"
+msgstr ""
+
 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:35
 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195
 msgid "Rotate lower part upwards"
@@ -698,10 +773,7 @@ msgid "Cut object:"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:88
-msgid "Cut [C]"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 src/libslic3r/PrintConfig.cpp:3013
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 src/libslic3r/PrintConfig.cpp:3039
 msgid "Cut"
 msgstr ""
 
@@ -714,11 +786,11 @@ msgid "Keep lower part"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:32
-msgid "Place on face [F]"
+msgid "Place on face"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:51
-msgid "Move [M]"
+msgid "Move"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
@@ -730,7 +802,11 @@ msgid "Displacement (mm)"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:458
-msgid "Rotate [R]"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:324
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:342
+#: src/libslic3r/PrintConfig.cpp:3088
+msgid "Rotate"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:491
@@ -738,139 +814,167 @@ msgid "Rotation (deg)"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:51
-msgid "Scale [S]"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:231
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:325
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:343
+#: src/libslic3r/PrintConfig.cpp:3103
+msgid "Scale"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:276
 msgid "Scale (%)"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:838
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:840
 msgid "Head diameter: "
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:851
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:853
 msgid "Lock supports under new islands"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:855
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:857
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1239
 msgid "Remove selected points"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:859
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:861
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:914
 msgid "Remove all points"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:864
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:866
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1242
 msgid "Apply changes"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1241
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:871
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1243
 msgid "Discard changes"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:877
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:879
 msgid "Minimal points distance: "
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:888
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:890
 msgid "Support points density: "
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:902
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1243
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:904
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1245
 msgid "Auto-generate points"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:908
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:910
 msgid "Manual editing"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:926
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:928
 msgid "Clipping of view:"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:928
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:930
 msgid "Reset direction"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:995
-msgid "SLA Support Points [L]"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:997
+msgid "SLA Support Points"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1022
-msgid "Do you want to save your manually edited support points ?\n"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1024
+msgid "Do you want to save your manually edited support points?"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1023
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1025
 msgid "Save changes?"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1166
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1168
 msgid ""
 "Autogeneration will erase all manually edited points.\n"
 "\n"
 "Are you sure you want to do it?\n"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1168 src/slic3r/GUI/GUI.cpp:283
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1170 src/slic3r/GUI/GUI.cpp:283
 #: src/slic3r/GUI/WipeTowerDialog.cpp:44 src/slic3r/GUI/WipeTowerDialog.cpp:328
 msgid "Warning"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1200
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1202
 msgid "SLA gizmo keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1229
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
+msgid "Note: some shortcuts work in (non)editing mode only."
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235
+msgid "Left click"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
 msgid "Add point"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1230
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
+msgid "Right click"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
 msgid "Remove point"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
+msgid "Drag"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
 msgid "Move point"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234
 msgid "Add point to selection"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235
 msgid "Remove point from selection"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
 msgid "Select by rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
 msgid "Deselect by rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1238
 msgid "Select all points"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1238
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240
+msgid "Mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240
 msgid "Move clipping plane"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1239
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1241
 msgid "Reset clipping plane"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1242
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1244
 msgid "Switch to editing mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:142 src/slic3r/GUI/Tab.cpp:2796
+#: src/slic3r/GUI/GUI.cpp:142 src/slic3r/GUI/Tab.cpp:2797
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 
@@ -878,8 +982,7 @@ msgstr ""
 msgid "Please check and fix your object list."
 msgstr ""
 
-#: src/slic3r/GUI/GUI.cpp:144 src/slic3r/GUI/GUI_App.cpp:743
-#: src/slic3r/GUI/Tab.cpp:2798
+#: src/slic3r/GUI/GUI.cpp:144 src/slic3r/GUI/Tab.cpp:2799
 msgid "Attention!"
 msgstr ""
 
@@ -887,207 +990,209 @@ msgstr ""
 msgid "Notice"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:378
+#: src/slic3r/GUI/GUI_App.cpp:390
 msgid "Changing of an application language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:386 src/slic3r/GUI/GUI_App.cpp:395
+#: src/slic3r/GUI/GUI_App.cpp:398 src/slic3r/GUI/GUI_App.cpp:407
 msgid "Recreating"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:399
+#: src/slic3r/GUI/GUI_App.cpp:411
 msgid "Loading of current presets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:407
+#: src/slic3r/GUI/GUI_App.cpp:419
 msgid "Loading of a mode view"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:489
+#: src/slic3r/GUI/GUI_App.cpp:501
 msgid "Choose one file (3MF):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:501
+#: src/slic3r/GUI/GUI_App.cpp:513
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:514
+#: src/slic3r/GUI/GUI_App.cpp:526
 msgid "Array of language names and identifiers should have the same size."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:524
+#: src/slic3r/GUI/GUI_App.cpp:536
 msgid "Select the language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:524
+#: src/slic3r/GUI/GUI_App.cpp:536
 msgid "Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:594 src/slic3r/GUI/GUI_ObjectList.cpp:1245
-#: src/libslic3r/PrintConfig.cpp:299
+#: src/slic3r/GUI/GUI_App.cpp:606 src/slic3r/GUI/GUI_ObjectList.cpp:1257
+#: src/libslic3r/PrintConfig.cpp:300
 msgid "Default"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:661
+#: src/slic3r/GUI/GUI_App.cpp:673
 msgid "&Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:661
+#: src/slic3r/GUI/GUI_App.cpp:673
 msgid "Inspect / activate configuration snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:662
+#: src/slic3r/GUI/GUI_App.cpp:674
 msgid "Take Configuration &Snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:662
+#: src/slic3r/GUI/GUI_App.cpp:674
 msgid "Capture a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:665
+#: src/slic3r/GUI/GUI_App.cpp:677
 msgid "&Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:671
+#: src/slic3r/GUI/GUI_App.cpp:683
 msgid "Application preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:674 src/slic3r/GUI/wxExtensions.cpp:2459
+#: src/slic3r/GUI/GUI_App.cpp:686 src/slic3r/GUI/wxExtensions.cpp:2509
 msgid "Simple"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:674
+#: src/slic3r/GUI/GUI_App.cpp:686
 msgid "Simple View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:675 src/slic3r/GUI/GUI_ObjectList.cpp:76
-#: src/slic3r/GUI/GUI_ObjectList.cpp:517 src/slic3r/GUI/Tab.cpp:1026
-#: src/slic3r/GUI/Tab.cpp:1041 src/slic3r/GUI/Tab.cpp:1139
-#: src/slic3r/GUI/Tab.cpp:1142 src/slic3r/GUI/Tab.cpp:1515
-#: src/slic3r/GUI/Tab.cpp:1940 src/slic3r/GUI/Tab.cpp:3435
-#: src/slic3r/GUI/wxExtensions.cpp:2460 src/libslic3r/PrintConfig.cpp:72
-#: src/libslic3r/PrintConfig.cpp:187 src/libslic3r/PrintConfig.cpp:350
-#: src/libslic3r/PrintConfig.cpp:988 src/libslic3r/PrintConfig.cpp:2175
+#: src/slic3r/GUI/GUI_App.cpp:687 src/slic3r/GUI/GUI_ObjectList.cpp:85
+#: src/slic3r/GUI/GUI_ObjectList.cpp:539 src/slic3r/GUI/Tab.cpp:1027
+#: src/slic3r/GUI/Tab.cpp:1042 src/slic3r/GUI/Tab.cpp:1140
+#: src/slic3r/GUI/Tab.cpp:1143 src/slic3r/GUI/Tab.cpp:1516
+#: src/slic3r/GUI/Tab.cpp:1941 src/slic3r/GUI/Tab.cpp:3440
+#: src/slic3r/GUI/wxExtensions.cpp:2510 src/libslic3r/PrintConfig.cpp:73
+#: src/libslic3r/PrintConfig.cpp:188 src/libslic3r/PrintConfig.cpp:351
+#: src/libslic3r/PrintConfig.cpp:989 src/libslic3r/PrintConfig.cpp:2200
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:675
+#: src/slic3r/GUI/GUI_App.cpp:687
 msgid "Advanced View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:676 src/slic3r/GUI/wxExtensions.cpp:2461
+#: src/slic3r/GUI/GUI_App.cpp:688 src/slic3r/GUI/wxExtensions.cpp:2511
 msgid "Expert"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:676
+#: src/slic3r/GUI/GUI_App.cpp:688
 msgid "Expert View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:681
+#: src/slic3r/GUI/GUI_App.cpp:693
 msgid "Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:681
+#: src/slic3r/GUI/GUI_App.cpp:693
 #, possible-c-format
 msgid "%s View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:683
+#: src/slic3r/GUI/GUI_App.cpp:695
 msgid "Change Application &Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:685
+#: src/slic3r/GUI/GUI_App.cpp:697
 msgid "Flash printer &firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:685
+#: src/slic3r/GUI/GUI_App.cpp:697
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:697
+#: src/slic3r/GUI/GUI_App.cpp:709
 msgid "Taking configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:697
+#: src/slic3r/GUI/GUI_App.cpp:709
 msgid "Snapshot name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:740
-msgid "Application will be restarted after language change."
+#: src/slic3r/GUI/GUI_App.cpp:752
+msgid ""
+"Switching the language will trigger application restart.\n"
+"You will lose content of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:741
-msgid "3D-Scene will be cleaned."
+#: src/slic3r/GUI/GUI_App.cpp:754
+msgid "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:742
-msgid "Please, check your changes before."
+#: src/slic3r/GUI/GUI_App.cpp:755
+msgid "Language selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:769
+#: src/slic3r/GUI/GUI_App.cpp:781
 msgid "&Configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:789
-msgid "You have unsaved changes "
+#: src/slic3r/GUI/GUI_App.cpp:801
+msgid "The following presets were modified: "
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:789
-msgid ". Discard changes and continue anyway?"
+#: src/slic3r/GUI/GUI_App.cpp:801 src/slic3r/GUI/Tab.cpp:2785
+msgid "Discard changes and continue anyway?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:790
+#: src/slic3r/GUI/GUI_App.cpp:802
 msgid "Unsaved Presets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:28 src/slic3r/GUI/GUI_ObjectList.cpp:68
-#: src/slic3r/GUI/GUI_ObjectList.cpp:509 src/libslic3r/PrintConfig.cpp:56
-#: src/libslic3r/PrintConfig.cpp:150 src/libslic3r/PrintConfig.cpp:381
-#: src/libslic3r/PrintConfig.cpp:438 src/libslic3r/PrintConfig.cpp:446
-#: src/libslic3r/PrintConfig.cpp:842 src/libslic3r/PrintConfig.cpp:1026
-#: src/libslic3r/PrintConfig.cpp:1305 src/libslic3r/PrintConfig.cpp:1371
-#: src/libslic3r/PrintConfig.cpp:1552 src/libslic3r/PrintConfig.cpp:1987
-#: src/libslic3r/PrintConfig.cpp:2044
+#: src/slic3r/GUI/GUI_ObjectList.cpp:28 src/slic3r/GUI/GUI_ObjectList.cpp:77
+#: src/slic3r/GUI/GUI_ObjectList.cpp:531 src/libslic3r/PrintConfig.cpp:57
+#: src/libslic3r/PrintConfig.cpp:151 src/libslic3r/PrintConfig.cpp:382
+#: src/libslic3r/PrintConfig.cpp:439 src/libslic3r/PrintConfig.cpp:447
+#: src/libslic3r/PrintConfig.cpp:843 src/libslic3r/PrintConfig.cpp:1027
+#: src/libslic3r/PrintConfig.cpp:1330 src/libslic3r/PrintConfig.cpp:1396
+#: src/libslic3r/PrintConfig.cpp:1577 src/libslic3r/PrintConfig.cpp:2012
+#: src/libslic3r/PrintConfig.cpp:2069
 msgid "Layers and Perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:29 src/slic3r/GUI/GUI_ObjectList.cpp:69
-#: src/slic3r/GUI/GUI_ObjectList.cpp:510 src/slic3r/GUI/Plater.cpp:439
-#: src/slic3r/GUI/Tab.cpp:1030 src/slic3r/GUI/Tab.cpp:1031
-#: src/slic3r/GUI/Tab.cpp:1360 src/libslic3r/PrintConfig.cpp:167
-#: src/libslic3r/PrintConfig.cpp:389 src/libslic3r/PrintConfig.cpp:729
-#: src/libslic3r/PrintConfig.cpp:743 src/libslic3r/PrintConfig.cpp:780
-#: src/libslic3r/PrintConfig.cpp:933 src/libslic3r/PrintConfig.cpp:943
-#: src/libslic3r/PrintConfig.cpp:961 src/libslic3r/PrintConfig.cpp:979
-#: src/libslic3r/PrintConfig.cpp:998 src/libslic3r/PrintConfig.cpp:1659
-#: src/libslic3r/PrintConfig.cpp:1676
+#: src/slic3r/GUI/GUI_ObjectList.cpp:29 src/slic3r/GUI/GUI_ObjectList.cpp:78
+#: src/slic3r/GUI/GUI_ObjectList.cpp:532 src/slic3r/GUI/Plater.cpp:447
+#: src/slic3r/GUI/Tab.cpp:1031 src/slic3r/GUI/Tab.cpp:1032
+#: src/slic3r/GUI/Tab.cpp:1361 src/libslic3r/PrintConfig.cpp:168
+#: src/libslic3r/PrintConfig.cpp:390 src/libslic3r/PrintConfig.cpp:730
+#: src/libslic3r/PrintConfig.cpp:744 src/libslic3r/PrintConfig.cpp:781
+#: src/libslic3r/PrintConfig.cpp:934 src/libslic3r/PrintConfig.cpp:944
+#: src/libslic3r/PrintConfig.cpp:962 src/libslic3r/PrintConfig.cpp:980
+#: src/libslic3r/PrintConfig.cpp:999 src/libslic3r/PrintConfig.cpp:1684
+#: src/libslic3r/PrintConfig.cpp:1701
 msgid "Infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:30 src/slic3r/GUI/GUI_ObjectList.cpp:70
-#: src/slic3r/GUI/GUI_ObjectList.cpp:511 src/slic3r/GUI/GUI_Preview.cpp:236
-#: src/slic3r/GUI/Tab.cpp:1059 src/slic3r/GUI/Tab.cpp:1060
-#: src/libslic3r/PrintConfig.cpp:334 src/libslic3r/PrintConfig.cpp:1432
-#: src/libslic3r/PrintConfig.cpp:1780 src/libslic3r/PrintConfig.cpp:1786
-#: src/libslic3r/PrintConfig.cpp:1794 src/libslic3r/PrintConfig.cpp:1806
-#: src/libslic3r/PrintConfig.cpp:1816 src/libslic3r/PrintConfig.cpp:1824
-#: src/libslic3r/PrintConfig.cpp:1839 src/libslic3r/PrintConfig.cpp:1860
-#: src/libslic3r/PrintConfig.cpp:1871 src/libslic3r/PrintConfig.cpp:1887
-#: src/libslic3r/PrintConfig.cpp:1896 src/libslic3r/PrintConfig.cpp:1905
-#: src/libslic3r/PrintConfig.cpp:1916 src/libslic3r/PrintConfig.cpp:1930
-#: src/libslic3r/PrintConfig.cpp:1938 src/libslic3r/PrintConfig.cpp:1939
-#: src/libslic3r/PrintConfig.cpp:1948 src/libslic3r/PrintConfig.cpp:1956
-#: src/libslic3r/PrintConfig.cpp:1970 src/libslic3r/GCode/PreviewData.cpp:172
+#: src/slic3r/GUI/GUI_ObjectList.cpp:30 src/slic3r/GUI/GUI_ObjectList.cpp:79
+#: src/slic3r/GUI/GUI_ObjectList.cpp:533 src/slic3r/GUI/GUI_Preview.cpp:236
+#: src/slic3r/GUI/Tab.cpp:1060 src/slic3r/GUI/Tab.cpp:1061
+#: src/libslic3r/PrintConfig.cpp:335 src/libslic3r/PrintConfig.cpp:1457
+#: src/libslic3r/PrintConfig.cpp:1805 src/libslic3r/PrintConfig.cpp:1811
+#: src/libslic3r/PrintConfig.cpp:1819 src/libslic3r/PrintConfig.cpp:1831
+#: src/libslic3r/PrintConfig.cpp:1841 src/libslic3r/PrintConfig.cpp:1849
+#: src/libslic3r/PrintConfig.cpp:1864 src/libslic3r/PrintConfig.cpp:1885
+#: src/libslic3r/PrintConfig.cpp:1896 src/libslic3r/PrintConfig.cpp:1912
+#: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1930
+#: src/libslic3r/PrintConfig.cpp:1941 src/libslic3r/PrintConfig.cpp:1955
+#: src/libslic3r/PrintConfig.cpp:1963 src/libslic3r/PrintConfig.cpp:1964
+#: src/libslic3r/PrintConfig.cpp:1973 src/libslic3r/PrintConfig.cpp:1981
+#: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/GCode/PreviewData.cpp:172
 msgid "Support material"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_ObjectList.cpp:72
-#: src/slic3r/GUI/GUI_ObjectList.cpp:513 src/slic3r/GUI/Tab.cpp:1119
-#: src/slic3r/GUI/Tab.cpp:1844 src/libslic3r/PrintConfig.cpp:456
-#: src/libslic3r/PrintConfig.cpp:954 src/libslic3r/PrintConfig.cpp:1340
-#: src/libslic3r/PrintConfig.cpp:1668 src/libslic3r/PrintConfig.cpp:1852
-#: src/libslic3r/PrintConfig.cpp:1878 src/libslic3r/PrintConfig.cpp:2151
-#: src/libslic3r/PrintConfig.cpp:2159
+#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_ObjectList.cpp:81
+#: src/slic3r/GUI/GUI_ObjectList.cpp:535 src/slic3r/GUI/Tab.cpp:1120
+#: src/slic3r/GUI/Tab.cpp:1845 src/libslic3r/PrintConfig.cpp:457
+#: src/libslic3r/PrintConfig.cpp:955 src/libslic3r/PrintConfig.cpp:1365
+#: src/libslic3r/PrintConfig.cpp:1693 src/libslic3r/PrintConfig.cpp:1877
+#: src/libslic3r/PrintConfig.cpp:1903 src/libslic3r/PrintConfig.cpp:2176
+#: src/libslic3r/PrintConfig.cpp:2184
 msgid "Extruders"
 msgstr ""
 
@@ -1095,341 +1200,345 @@ msgstr ""
 msgid "Pad and Support"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:71 src/slic3r/GUI/GUI_ObjectList.cpp:512
-#: src/slic3r/GUI/GUI_Preview.cpp:215 src/slic3r/GUI/Tab.cpp:1084
-#: src/libslic3r/PrintConfig.cpp:199 src/libslic3r/PrintConfig.cpp:426
-#: src/libslic3r/PrintConfig.cpp:871 src/libslic3r/PrintConfig.cpp:999
-#: src/libslic3r/PrintConfig.cpp:1361 src/libslic3r/PrintConfig.cpp:1598
-#: src/libslic3r/PrintConfig.cpp:1647 src/libslic3r/PrintConfig.cpp:1698
-#: src/libslic3r/PrintConfig.cpp:2029
+#: src/slic3r/GUI/GUI_ObjectList.cpp:45
+msgid "Add part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:46
+msgid "Add modifier"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:47
+msgid "Add support enforcer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:48
+msgid "Add support blocker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:80 src/slic3r/GUI/GUI_ObjectList.cpp:534
+#: src/slic3r/GUI/GUI_Preview.cpp:215 src/slic3r/GUI/Tab.cpp:1085
+#: src/libslic3r/PrintConfig.cpp:200 src/libslic3r/PrintConfig.cpp:427
+#: src/libslic3r/PrintConfig.cpp:872 src/libslic3r/PrintConfig.cpp:1000
+#: src/libslic3r/PrintConfig.cpp:1386 src/libslic3r/PrintConfig.cpp:1623
+#: src/libslic3r/PrintConfig.cpp:1672 src/libslic3r/PrintConfig.cpp:1723
+#: src/libslic3r/PrintConfig.cpp:2054
 msgid "Speed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:73 src/slic3r/GUI/GUI_ObjectList.cpp:514
-#: src/libslic3r/PrintConfig.cpp:416 src/libslic3r/PrintConfig.cpp:523
-#: src/libslic3r/PrintConfig.cpp:830 src/libslic3r/PrintConfig.cpp:962
-#: src/libslic3r/PrintConfig.cpp:1349 src/libslic3r/PrintConfig.cpp:1688
-#: src/libslic3r/PrintConfig.cpp:1861 src/libslic3r/PrintConfig.cpp:2018
+#: src/slic3r/GUI/GUI_ObjectList.cpp:82 src/slic3r/GUI/GUI_ObjectList.cpp:536
+#: src/libslic3r/PrintConfig.cpp:417 src/libslic3r/PrintConfig.cpp:524
+#: src/libslic3r/PrintConfig.cpp:831 src/libslic3r/PrintConfig.cpp:963
+#: src/libslic3r/PrintConfig.cpp:1374 src/libslic3r/PrintConfig.cpp:1713
+#: src/libslic3r/PrintConfig.cpp:1886 src/libslic3r/PrintConfig.cpp:2043
 msgid "Extrusion Width"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:78 src/slic3r/GUI/GUI_ObjectList.cpp:519
-#: src/slic3r/GUI/Plater.cpp:418 src/slic3r/GUI/Tab.cpp:3397
-#: src/slic3r/GUI/Tab.cpp:3398 src/libslic3r/PrintConfig.cpp:2363
-#: src/libslic3r/PrintConfig.cpp:2370 src/libslic3r/PrintConfig.cpp:2379
-#: src/libslic3r/PrintConfig.cpp:2388 src/libslic3r/PrintConfig.cpp:2398
-#: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2431
-#: src/libslic3r/PrintConfig.cpp:2442 src/libslic3r/PrintConfig.cpp:2452
-#: src/libslic3r/PrintConfig.cpp:2461 src/libslic3r/PrintConfig.cpp:2471
-#: src/libslic3r/PrintConfig.cpp:2480 src/libslic3r/PrintConfig.cpp:2490
-#: src/libslic3r/PrintConfig.cpp:2500 src/libslic3r/PrintConfig.cpp:2508
+#: src/slic3r/GUI/GUI_ObjectList.cpp:87 src/slic3r/GUI/GUI_ObjectList.cpp:541
+#: src/slic3r/GUI/Plater.cpp:429 src/slic3r/GUI/Tab.cpp:3402
+#: src/slic3r/GUI/Tab.cpp:3403 src/libslic3r/PrintConfig.cpp:2388
+#: src/libslic3r/PrintConfig.cpp:2395 src/libslic3r/PrintConfig.cpp:2404
+#: src/libslic3r/PrintConfig.cpp:2413 src/libslic3r/PrintConfig.cpp:2423
+#: src/libslic3r/PrintConfig.cpp:2449 src/libslic3r/PrintConfig.cpp:2456
+#: src/libslic3r/PrintConfig.cpp:2467 src/libslic3r/PrintConfig.cpp:2477
+#: src/libslic3r/PrintConfig.cpp:2486 src/libslic3r/PrintConfig.cpp:2496
+#: src/libslic3r/PrintConfig.cpp:2505 src/libslic3r/PrintConfig.cpp:2515
+#: src/libslic3r/PrintConfig.cpp:2525 src/libslic3r/PrintConfig.cpp:2533
 msgid "Supports"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:79 src/slic3r/GUI/GUI_ObjectList.cpp:520
-#: src/slic3r/GUI/Tab.cpp:3425 src/slic3r/GUI/Tab.cpp:3426
-#: src/libslic3r/PrintConfig.cpp:2516 src/libslic3r/PrintConfig.cpp:2523
-#: src/libslic3r/PrintConfig.cpp:2537 src/libslic3r/PrintConfig.cpp:2547
-#: src/libslic3r/PrintConfig.cpp:2560 src/libslic3r/PrintConfig.cpp:2569
+#: src/slic3r/GUI/GUI_ObjectList.cpp:88 src/slic3r/GUI/GUI_ObjectList.cpp:542
+#: src/slic3r/GUI/Tab.cpp:3430 src/slic3r/GUI/Tab.cpp:3431
+#: src/libslic3r/PrintConfig.cpp:2541 src/libslic3r/PrintConfig.cpp:2548
+#: src/libslic3r/PrintConfig.cpp:2562 src/libslic3r/PrintConfig.cpp:2572
+#: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2594
 msgid "Pad"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:176
+#: src/slic3r/GUI/GUI_ObjectList.cpp:203
 msgid "Name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:230
+#: src/slic3r/GUI/GUI_ObjectList.cpp:257
 #, possible-c-format
 msgid "Auto-repaired (%d errors):\n"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:237
+#: src/slic3r/GUI/GUI_ObjectList.cpp:264
 msgid "degenerate facets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:238
+#: src/slic3r/GUI/GUI_ObjectList.cpp:265
 msgid "edges fixed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:239
+#: src/slic3r/GUI/GUI_ObjectList.cpp:266
 msgid "facets removed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:240
+#: src/slic3r/GUI/GUI_ObjectList.cpp:267
 msgid "facets added"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:241
+#: src/slic3r/GUI/GUI_ObjectList.cpp:268
 msgid "facets reversed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:242
+#: src/slic3r/GUI/GUI_ObjectList.cpp:269
 msgid "backwards edges"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:250
+#: src/slic3r/GUI/GUI_ObjectList.cpp:277
 msgid "Right button click the icon to fix STL through Netfabb"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:279
+#: src/slic3r/GUI/GUI_ObjectList.cpp:306
 msgid "Right button click the icon to change the object settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:335 src/slic3r/GUI/Tab.cpp:1479
-#: src/libslic3r/PrintConfig.cpp:455
+#: src/slic3r/GUI/GUI_ObjectList.cpp:362 src/slic3r/GUI/Tab.cpp:1480
+#: src/libslic3r/PrintConfig.cpp:456
 msgid "Extruder"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:854 src/slic3r/GUI/GUI_ObjectList.cpp:1139
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1145
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1377
+#: src/slic3r/GUI/GUI_ObjectList.cpp:876 src/slic3r/GUI/GUI_ObjectList.cpp:1151
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1157
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1389
 #, possible-c-format
 msgid "Quick Add Settings (%s)"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:917
+#: src/slic3r/GUI/GUI_ObjectList.cpp:939
 msgid "Select showing settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1050
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1072
 msgid "Load"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1055
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1087
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1090
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1102
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1105
 msgid "Box"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1055
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
 msgid "Cylinder"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1055
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
 msgid "Sphere"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1055
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
 msgid "Slab"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1066
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1082
-msgid "Add part"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1067
-msgid "Add modifier"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1068
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1086
-msgid "Add support enforcer"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1069
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1089
-msgid "Add support blocker"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1110
-msgid "Split to parts"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1118
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1130
 msgid "Add settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1185
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1197
 msgid "Change type"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1192
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1331
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1204
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1343
 msgid "Set as a Separated Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1200
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1212
 msgid "Rename"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1210
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1222
 msgid "Fix through the Netfabb"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1219 src/slic3r/GUI/Plater.cpp:2927
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1231 src/slic3r/GUI/Plater.cpp:2944
 msgid "Export as STL"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1226
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1238
 msgid "Change extruder"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1251
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1263
 msgid "Select new extruder for the object/part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1257 src/slic3r/GUI/Plater.cpp:2891
-#: src/slic3r/GUI/Plater.cpp:2909 src/slic3r/GUI/Tab.cpp:2937
-msgid "Delete"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1331
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1343
 msgid "Set as a Separated Objects"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1551
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1556
 msgid "Generic"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1694
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1699
 msgid "You can't delete the last solid part from object."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1711
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1716
 msgid "You can't delete the last intance from object."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1737 src/slic3r/GUI/Plater.cpp:2279
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1742 src/slic3r/GUI/Plater.cpp:2290
 msgid ""
 "The selected object couldn't be split because it contains only one part."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1846
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1851
 msgid "Group manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1858
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1863
 msgid "Object manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1868
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1873
 msgid "Object Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1872
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1877
 msgid "Part Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1881
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1886
 msgid "Part manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1887
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1892
 msgid "Instance manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2412
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2417
 msgid "Object or Instance"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2412
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2417
 msgid "Part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2414
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2419
 msgid "Unsupported selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2415
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2420
 #, possible-c-format
 msgid "You started your selection with %s Item."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2416
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2421
 #, possible-c-format
 msgid "In this mode you can select only other %s Items%s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2419
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2424
 msgid "of a current Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2424
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2497 src/slic3r/GUI/Plater.cpp:118
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2429
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2502 src/slic3r/GUI/Plater.cpp:118
 msgid "Info"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2538
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2543
 msgid "You can't change a type of the last solid part of the object."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2545
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2550
 msgid "Select type of part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2709
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2714
 msgid "Enter new name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2709
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2714
 msgid "Renaming"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2725
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2812 src/slic3r/GUI/Tab.cpp:3278
-#: src/slic3r/GUI/Tab.cpp:3282
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2730
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2824 src/slic3r/GUI/Tab.cpp:3283
+#: src/slic3r/GUI/Tab.cpp:3287
 msgid "The supplied name is not valid;"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2726
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2813 src/slic3r/GUI/Tab.cpp:3279
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2731
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2825 src/slic3r/GUI/Tab.cpp:3284
 msgid "the following characters are not allowed:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2833
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2845
 msgid "Set extruder for selected items"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2834
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2846
 msgid "Select extruder number for selected objects and/or parts"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2847
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2859
 msgid "Select extruder number:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2848
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2860
 msgid "This extruder will be set for selected items"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:27
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:40
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:83
+msgid "World coordinates"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:41
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:84
+msgid "Local coordinates"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:60
+msgid "Select coordinate space, in which the transformation will be performed."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:102
 msgid "Object Manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:78
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153
 msgid "Object name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:150
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:193
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:229
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:282
 msgid "Position"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:151
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:194
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:283
 msgid "Rotation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:152
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:234
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:254
-#: src/libslic3r/PrintConfig.cpp:3077
-msgid "Scale"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284
+msgid "Scale factors"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:195
-msgid "Scale factors"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
+msgid "Translate"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:233
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:253
-#: src/libslic3r/PrintConfig.cpp:3062
-msgid "Rotate"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640
+msgid ""
+"The currently manipulated object is tilted (rotation angles are not "
+"multiples of 90°).\n"
+"Non-uniform scaling of tilted objects is only possible in the World "
+"coordinate system,\n"
+"once the rotation is embedded into the object coordinates."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:252
-msgid "Translate"
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:643
+msgid ""
+"This operation is irreversible.\n"
+"Do you want to proceed?"
 msgstr ""
 
 #: src/slic3r/GUI/GUI_ObjectSettings.cpp:58
@@ -1445,11 +1554,11 @@ msgstr ""
 msgid "Feature type"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:468
+#: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:469
 msgid "Height"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:214 src/libslic3r/PrintConfig.cpp:2137
+#: src/slic3r/GUI/GUI_Preview.cpp:214 src/libslic3r/PrintConfig.cpp:2162
 msgid "Width"
 msgstr ""
 
@@ -1492,13 +1601,13 @@ msgstr ""
 msgid "Internal infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/PrintConfig.cpp:1687
-#: src/libslic3r/PrintConfig.cpp:1697 src/libslic3r/GCode/PreviewData.cpp:167
+#: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/PrintConfig.cpp:1712
+#: src/libslic3r/PrintConfig.cpp:1722 src/libslic3r/GCode/PreviewData.cpp:167
 msgid "Solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/PrintConfig.cpp:2017
-#: src/libslic3r/PrintConfig.cpp:2028 src/libslic3r/GCode/PreviewData.cpp:168
+#: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/PrintConfig.cpp:2042
+#: src/libslic3r/PrintConfig.cpp:2053 src/libslic3r/GCode/PreviewData.cpp:168
 msgid "Top solid infill"
 msgstr ""
 
@@ -1506,27 +1615,27 @@ msgstr ""
 msgid "Bridge infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/PrintConfig.cpp:870
+#: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/PrintConfig.cpp:871
 #: src/libslic3r/GCode/PreviewData.cpp:170
 msgid "Gap fill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:235 src/slic3r/GUI/Tab.cpp:1050
+#: src/slic3r/GUI/GUI_Preview.cpp:235 src/slic3r/GUI/Tab.cpp:1051
 #: src/libslic3r/GCode/PreviewData.cpp:171
 msgid "Skirt"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/PrintConfig.cpp:1904
+#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/PrintConfig.cpp:1929
 #: src/libslic3r/GCode/PreviewData.cpp:173
 msgid "Support material interface"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/Tab.cpp:1130
+#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/Tab.cpp:1131
 #: src/libslic3r/GCode/PreviewData.cpp:174
 msgid "Wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/PrintConfig.cpp:2051
+#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/PrintConfig.cpp:2076
 msgid "Travel"
 msgstr ""
 
@@ -1542,7 +1651,7 @@ msgstr ""
 msgid "Shells"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:13 src/slic3r/GUI/MainFrame.cpp:566
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:13 src/slic3r/GUI/MainFrame.cpp:571
 msgid "Keyboard Shortcuts"
 msgstr ""
 
@@ -1558,8 +1667,8 @@ msgstr ""
 msgid "Load Config from .ini/amf/3mf/gcode"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:733
-#: src/slic3r/GUI/Plater.cpp:3821 src/libslic3r/PrintConfig.cpp:2964
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:740
+#: src/slic3r/GUI/Plater.cpp:3839 src/libslic3r/PrintConfig.cpp:2990
 msgid "Export G-code"
 msgstr ""
 
@@ -1575,22 +1684,10 @@ msgstr ""
 msgid "(Re)slice"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
-msgid "Quick slice"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:113 src/slic3r/GUI/MainFrame.cpp:395
-msgid "Repeat last quick slice"
-msgstr ""
-
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:114
 msgid "Select Plater Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:115
-msgid "Quick slice and Save as"
-msgstr ""
-
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:116
 msgid "Select Print Settings Tab"
 msgstr ""
@@ -1621,15 +1718,15 @@ msgid "Print host upload queue"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:123
-msgid "Camera view "
+msgid "Camera view"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:124
-msgid "Add Instance to selected object "
+msgid "Add Instance of the selected object"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:125
-msgid "Remove Instance from selected object"
+msgid "Remove Instance of the selected object"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:126
@@ -1644,10 +1741,6 @@ msgstr ""
 msgid "Main Shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
-msgid "Arrange"
-msgstr ""
-
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:136
 msgid "Select All objects"
 msgstr ""
@@ -1693,7 +1786,7 @@ msgid "Gizmo SLA support points"
 msgstr ""
 
 #: src/slic3r/GUI/KBShortcutsDialog.cpp:147
-#, no-c-format
+#, possible-c-format
 msgid ""
 "Press to snap by 5% in Gizmo scale\n"
 "or by 1mm in Gizmo move"
@@ -1793,531 +1886,525 @@ msgstr ""
 msgid "Layers Slider Shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:55
+#: src/slic3r/GUI/MainFrame.cpp:61
 msgid ""
 " - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:161
+#: src/slic3r/GUI/MainFrame.cpp:163
 msgid "Plater"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:339
+#: src/slic3r/GUI/MainFrame.cpp:344
 msgid "&Open Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:339
+#: src/slic3r/GUI/MainFrame.cpp:344
 msgid "Open a project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:341
+#: src/slic3r/GUI/MainFrame.cpp:346
 msgid "&Save Project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:341
+#: src/slic3r/GUI/MainFrame.cpp:346
 msgid "Save current project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:343
+#: src/slic3r/GUI/MainFrame.cpp:348
 msgid "Save Project &as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:343
+#: src/slic3r/GUI/MainFrame.cpp:348
 msgid "Save current project file as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:349
+#: src/slic3r/GUI/MainFrame.cpp:354
 msgid "Import STL/OBJ/AM&F/3MF"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:349
+#: src/slic3r/GUI/MainFrame.cpp:354
 msgid "Load a model"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:352
+#: src/slic3r/GUI/MainFrame.cpp:357
 msgid "Import &Config"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:352
+#: src/slic3r/GUI/MainFrame.cpp:357
 msgid "Load exported configuration file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:354
+#: src/slic3r/GUI/MainFrame.cpp:359
 msgid "Import Config from &project"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:354
+#: src/slic3r/GUI/MainFrame.cpp:359
 msgid "Load configuration from project file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:357
+#: src/slic3r/GUI/MainFrame.cpp:362
 msgid "Import Config &Bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:357
+#: src/slic3r/GUI/MainFrame.cpp:362
 msgid "Load presets from a bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:359
+#: src/slic3r/GUI/MainFrame.cpp:364
 msgid "&Import"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:362 src/slic3r/GUI/MainFrame.cpp:602
+#: src/slic3r/GUI/MainFrame.cpp:367 src/slic3r/GUI/MainFrame.cpp:607
 msgid "Export &G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:362
+#: src/slic3r/GUI/MainFrame.cpp:367
 msgid "Export current plate as G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:366
+#: src/slic3r/GUI/MainFrame.cpp:371
 msgid "Export plate as &STL"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:366
+#: src/slic3r/GUI/MainFrame.cpp:371
 msgid "Export current plate as STL"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:368
+#: src/slic3r/GUI/MainFrame.cpp:373
 msgid "Export plate as STL including supports"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:368
+#: src/slic3r/GUI/MainFrame.cpp:373
 msgid "Export current plate as STL including supports"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:370
+#: src/slic3r/GUI/MainFrame.cpp:375
 msgid "Export plate as &AMF"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:370
+#: src/slic3r/GUI/MainFrame.cpp:375
 msgid "Export current plate as AMF"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:373
+#: src/slic3r/GUI/MainFrame.cpp:378
 msgid "Export &Config"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:373
+#: src/slic3r/GUI/MainFrame.cpp:378
 msgid "Export current configuration to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:375
+#: src/slic3r/GUI/MainFrame.cpp:380
 msgid "Export Config &Bundle"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:375
+#: src/slic3r/GUI/MainFrame.cpp:380
 msgid "Export all presets to file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:377
+#: src/slic3r/GUI/MainFrame.cpp:382
 msgid "&Export"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:383
+#: src/slic3r/GUI/MainFrame.cpp:388
 msgid "Quick Slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:383
+#: src/slic3r/GUI/MainFrame.cpp:388
 msgid "Slice a file into a G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:389
+#: src/slic3r/GUI/MainFrame.cpp:394
 msgid "Quick Slice and Save As"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:389
+#: src/slic3r/GUI/MainFrame.cpp:394
 msgid "Slice a file into a G-code, save as"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:395
+#: src/slic3r/GUI/MainFrame.cpp:400
 msgid "Repeat Last Quick Slice"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:403
+#: src/slic3r/GUI/MainFrame.cpp:400
+msgid "Repeat last quick slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:408
 msgid "(Re)Slice &Now"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:403
+#: src/slic3r/GUI/MainFrame.cpp:408
 msgid "Start new slicing process"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:406
+#: src/slic3r/GUI/MainFrame.cpp:411
 msgid "&Repair STL file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:406
+#: src/slic3r/GUI/MainFrame.cpp:411
 msgid "Automatically repair an STL file"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:409
+#: src/slic3r/GUI/MainFrame.cpp:414
 msgid "&Quit"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:409
+#: src/slic3r/GUI/MainFrame.cpp:414
 #, possible-c-format
 msgid "Quit %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:444
+#: src/slic3r/GUI/MainFrame.cpp:449
 msgid "&Select all"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:444
+#: src/slic3r/GUI/MainFrame.cpp:449
 msgid "Selects all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:447
+#: src/slic3r/GUI/MainFrame.cpp:452
 msgid "&Delete selected"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:447
+#: src/slic3r/GUI/MainFrame.cpp:452
 msgid "Deletes the current selection"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:449
+#: src/slic3r/GUI/MainFrame.cpp:454
 msgid "Delete &all"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:449
+#: src/slic3r/GUI/MainFrame.cpp:454
 msgid "Deletes all objects"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:454
+#: src/slic3r/GUI/MainFrame.cpp:459
 msgid "&Copy"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:454
+#: src/slic3r/GUI/MainFrame.cpp:459
 msgid "Copy selection to clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:456
+#: src/slic3r/GUI/MainFrame.cpp:461
 msgid "&Paste"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:456
+#: src/slic3r/GUI/MainFrame.cpp:461
 msgid "Paste clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:471
+#: src/slic3r/GUI/MainFrame.cpp:476
 msgid "&Plater Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:471
+#: src/slic3r/GUI/MainFrame.cpp:476
 msgid "Show the plater"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:478
+#: src/slic3r/GUI/MainFrame.cpp:483
 msgid "P&rint Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:478
+#: src/slic3r/GUI/MainFrame.cpp:483
 msgid "Show the print settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:480 src/slic3r/GUI/MainFrame.cpp:604
+#: src/slic3r/GUI/MainFrame.cpp:485 src/slic3r/GUI/MainFrame.cpp:609
 msgid "&Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:480
+#: src/slic3r/GUI/MainFrame.cpp:485
 msgid "Show the filament settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:483
+#: src/slic3r/GUI/MainFrame.cpp:488
 msgid "Print&er Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:483
+#: src/slic3r/GUI/MainFrame.cpp:488
 msgid "Show the printer settings"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:487
+#: src/slic3r/GUI/MainFrame.cpp:492
 msgid "3&D"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:487
+#: src/slic3r/GUI/MainFrame.cpp:492
 msgid "Show the 3D editing view"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:489
+#: src/slic3r/GUI/MainFrame.cpp:494
 msgid "Pre&view"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:489
+#: src/slic3r/GUI/MainFrame.cpp:494
 msgid "Show the 3D slices preview"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:510
+#: src/slic3r/GUI/MainFrame.cpp:515
 msgid "Print &Host Upload Queue"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:510
+#: src/slic3r/GUI/MainFrame.cpp:515
 msgid "Display the Print Host Upload Queue window"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:519
+#: src/slic3r/GUI/MainFrame.cpp:524
 msgid "Iso"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:519
+#: src/slic3r/GUI/MainFrame.cpp:524
 msgid "Iso View"
 msgstr ""
 
 #. TRN To be shown in the main menu View->Top
-#: src/slic3r/GUI/MainFrame.cpp:522
-msgid "Top"
-msgstr ""
-
 #. TRN To be shown in Print Settings "Top solid layers"
-#: src/libslic3r/PrintConfig.cpp:2043
-msgctxt "Layers"
+#: src/slic3r/GUI/MainFrame.cpp:527 src/libslic3r/PrintConfig.cpp:2068
 msgid "Top"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:522
+#: src/slic3r/GUI/MainFrame.cpp:527
 msgid "Top View"
 msgstr ""
 
 #. TRN To be shown in the main menu View->Bottom
-#: src/slic3r/GUI/MainFrame.cpp:524
-msgid "Bottom"
-msgstr ""
-
 #. TRN To be shown in Print Settings "Bottom solid layers"
-#: rc/libslic3r/PrintConfig.cpp:149
-msgctxt "Layers"
+#: src/slic3r/GUI/MainFrame.cpp:529 src/libslic3r/PrintConfig.cpp:150
 msgid "Bottom"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:524
+#: src/slic3r/GUI/MainFrame.cpp:529
 msgid "Bottom View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:525
+#: src/slic3r/GUI/MainFrame.cpp:530
 msgid "Front"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:525
+#: src/slic3r/GUI/MainFrame.cpp:530
 msgid "Front View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:526 src/libslic3r/PrintConfig.cpp:1562
+#: src/slic3r/GUI/MainFrame.cpp:531 src/libslic3r/PrintConfig.cpp:1587
 msgid "Rear"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:526
+#: src/slic3r/GUI/MainFrame.cpp:531
 msgid "Rear View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:527
+#: src/slic3r/GUI/MainFrame.cpp:532
 msgid "Left"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:527
+#: src/slic3r/GUI/MainFrame.cpp:532
 msgid "Left View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:528
+#: src/slic3r/GUI/MainFrame.cpp:533
 msgid "Right"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:528
+#: src/slic3r/GUI/MainFrame.cpp:533
 msgid "Right View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:542
+#: src/slic3r/GUI/MainFrame.cpp:547
 msgid "Prusa 3D &Drivers"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:542
+#: src/slic3r/GUI/MainFrame.cpp:547
 msgid "Open the Prusa3D drivers download page in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:544
+#: src/slic3r/GUI/MainFrame.cpp:549
 msgid "Prusa Edition &Releases"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:544
+#: src/slic3r/GUI/MainFrame.cpp:549
 msgid "Open the Prusa Edition releases page in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:550
+#: src/slic3r/GUI/MainFrame.cpp:555
 #, possible-c-format
 msgid "%s &Website"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:551
+#: src/slic3r/GUI/MainFrame.cpp:556
 #, possible-c-format
 msgid "Open the %s website in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:553
+#: src/slic3r/GUI/MainFrame.cpp:558
 #, possible-c-format
 msgid "%s &Manual"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:554
+#: src/slic3r/GUI/MainFrame.cpp:559
 #, possible-c-format
 msgid "Open the %s manual in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:557
+#: src/slic3r/GUI/MainFrame.cpp:562
 msgid "System &Info"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:557
+#: src/slic3r/GUI/MainFrame.cpp:562
 msgid "Show system information"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:559
+#: src/slic3r/GUI/MainFrame.cpp:564
 msgid "Show &Configuration Folder"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:559
+#: src/slic3r/GUI/MainFrame.cpp:564
 msgid "Show user configuration folder (datadir)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:561
+#: src/slic3r/GUI/MainFrame.cpp:566
 msgid "Report an I&ssue"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:561
+#: src/slic3r/GUI/MainFrame.cpp:566
 #, possible-c-format
 msgid "Report an issue on %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:563
+#: src/slic3r/GUI/MainFrame.cpp:568
 #, possible-c-format
 msgid "&About %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:563
+#: src/slic3r/GUI/MainFrame.cpp:568
 msgid "Show about dialog"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:566
+#: src/slic3r/GUI/MainFrame.cpp:571
 msgid "Show the list of the keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:574
+#: src/slic3r/GUI/MainFrame.cpp:579
 msgid "&File"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:575
+#: src/slic3r/GUI/MainFrame.cpp:580
 msgid "&Edit"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:576
+#: src/slic3r/GUI/MainFrame.cpp:581
 msgid "&Window"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:577
+#: src/slic3r/GUI/MainFrame.cpp:582
 msgid "&View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:580
+#: src/slic3r/GUI/MainFrame.cpp:585
 msgid "&Help"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:602 src/slic3r/GUI/Plater.cpp:3821
+#: src/slic3r/GUI/MainFrame.cpp:607 src/slic3r/GUI/Plater.cpp:3839
 msgid "Export"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:604
+#: src/slic3r/GUI/MainFrame.cpp:609
 msgid "Mate&rial Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:621
+#: src/slic3r/GUI/MainFrame.cpp:630
 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:635
+#: src/slic3r/GUI/MainFrame.cpp:644
 msgid "No previously sliced file."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:636 src/slic3r/GUI/PrintHostDialogs.cpp:230
+#: src/slic3r/GUI/MainFrame.cpp:645 src/slic3r/GUI/PrintHostDialogs.cpp:230
 msgid "Error"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:641
+#: src/slic3r/GUI/MainFrame.cpp:650
 msgid "Previously sliced file ("
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:641
+#: src/slic3r/GUI/MainFrame.cpp:650
 msgid ") not found."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:642
+#: src/slic3r/GUI/MainFrame.cpp:651
 msgid "File Not Found"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:677 src/slic3r/GUI/Tab.cpp:3239
+#: src/slic3r/GUI/MainFrame.cpp:686 src/slic3r/GUI/Tab.cpp:3244
 msgid "Save "
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:677
+#: src/slic3r/GUI/MainFrame.cpp:686
 msgid "SVG"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:677
+#: src/slic3r/GUI/MainFrame.cpp:686
 msgid "G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:677
+#: src/slic3r/GUI/MainFrame.cpp:686
 msgid " file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:692
+#: src/slic3r/GUI/MainFrame.cpp:701
 msgid "Save zip file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:704 src/slic3r/GUI/Plater.cpp:2412
-#: src/slic3r/GUI/Plater.cpp:3615 src/slic3r/GUI/Tab.cpp:1159
-#: src/slic3r/GUI/Tab.cpp:3436
+#: src/slic3r/GUI/MainFrame.cpp:713 src/slic3r/GUI/Plater.cpp:2423
+#: src/slic3r/GUI/Plater.cpp:3633 src/slic3r/GUI/Tab.cpp:1160
+#: src/slic3r/GUI/Tab.cpp:3441
 msgid "Slicing"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:704
+#: src/slic3r/GUI/MainFrame.cpp:713
 msgid "Processing "
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:727
+#: src/slic3r/GUI/MainFrame.cpp:736
 msgid " was successfully sliced."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:729
+#: src/slic3r/GUI/MainFrame.cpp:738
 msgid "Slicing Done!"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:744
+#: src/slic3r/GUI/MainFrame.cpp:753
 msgid "Select the STL file to repair:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:757
+#: src/slic3r/GUI/MainFrame.cpp:766
 msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:772
+#: src/slic3r/GUI/MainFrame.cpp:781
 msgid "Your file was repaired."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:772 src/libslic3r/PrintConfig.cpp:3058
+#: src/slic3r/GUI/MainFrame.cpp:781 src/libslic3r/PrintConfig.cpp:3084
 msgid "Repair"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:786
+#: src/slic3r/GUI/MainFrame.cpp:795
 msgid "Save configuration as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:806 src/slic3r/GUI/MainFrame.cpp:870
+#: src/slic3r/GUI/MainFrame.cpp:815 src/slic3r/GUI/MainFrame.cpp:879
 msgid "Select configuration to load:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:843
+#: src/slic3r/GUI/MainFrame.cpp:852
 msgid "Save presets bundle as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:894
+#: src/slic3r/GUI/MainFrame.cpp:903
 #, possible-c-format
 msgid "%d presets successfully imported."
 msgstr ""
@@ -2352,7 +2439,7 @@ msgstr ""
 msgid "Sliced Info"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:212 src/slic3r/GUI/Plater.cpp:1041
+#: src/slic3r/GUI/Plater.cpp:212 src/slic3r/GUI/Plater.cpp:1048
 msgid "Used Filament (m)"
 msgstr ""
 
@@ -2368,13 +2455,13 @@ msgstr ""
 msgid "Used Material (unit)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:216 src/slic3r/GUI/Plater.cpp:1056
-#: src/libslic3r/PrintConfig.cpp:717
+#: src/slic3r/GUI/Plater.cpp:216 src/slic3r/GUI/Plater.cpp:1063
+#: src/libslic3r/PrintConfig.cpp:718
 msgid "Cost"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:217 src/slic3r/GUI/Plater.cpp:1028
-#: src/slic3r/GUI/Plater.cpp:1070
+#: src/slic3r/GUI/Plater.cpp:217 src/slic3r/GUI/Plater.cpp:1035
+#: src/slic3r/GUI/Plater.cpp:1077
 msgid "Estimated printing time"
 msgstr ""
 
@@ -2386,397 +2473,405 @@ msgstr ""
 msgid "Click to edit preset"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:421
+#: src/slic3r/GUI/Plater.cpp:432
 msgid "Select what kind of support do you need"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:423 src/libslic3r/PrintConfig.cpp:1815
-#: src/libslic3r/PrintConfig.cpp:2423
+#: src/slic3r/GUI/Plater.cpp:434 src/libslic3r/PrintConfig.cpp:1840
+#: src/libslic3r/PrintConfig.cpp:2448
 msgid "Support on build plate only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:424
+#: src/slic3r/GUI/Plater.cpp:435 src/slic3r/GUI/Plater.cpp:528
+msgid "For support enforcers only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:436
 msgid "Everywhere"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:446 src/slic3r/GUI/Tab.cpp:1056
+#: src/slic3r/GUI/Plater.cpp:454 src/slic3r/GUI/Tab.cpp:1057
 msgid "Brim"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:448
+#: src/slic3r/GUI/Plater.cpp:456
 msgid ""
 "This flag enables the brim that will be printed around each object on the "
 "first layer."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:456
+#: src/slic3r/GUI/Plater.cpp:464
 msgid "Purging volumes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:681
+#: src/slic3r/GUI/Plater.cpp:688
 msgid "Print settings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:682 src/slic3r/GUI/Tab.cpp:1470
-#: src/slic3r/GUI/Tab.cpp:1471
+#: src/slic3r/GUI/Plater.cpp:689 src/slic3r/GUI/Tab.cpp:1471
+#: src/slic3r/GUI/Tab.cpp:1472
 msgid "Filament"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:683 src/slic3r/GUI/Preset.cpp:1276
-msgid "SLA print"
+#: src/slic3r/GUI/Plater.cpp:690
+msgid "SLA print settings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:684 src/slic3r/GUI/Preset.cpp:1277
+#: src/slic3r/GUI/Plater.cpp:691 src/slic3r/GUI/Preset.cpp:1277
 msgid "SLA material"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:685
+#: src/slic3r/GUI/Plater.cpp:692
 msgid "Printer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:731 src/slic3r/GUI/Plater.cpp:3822
+#: src/slic3r/GUI/Plater.cpp:738 src/slic3r/GUI/Plater.cpp:3840
 msgid "Send to printer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:734 src/slic3r/GUI/Plater.cpp:2412
-#: src/slic3r/GUI/Plater.cpp:3618
+#: src/slic3r/GUI/Plater.cpp:741 src/slic3r/GUI/Plater.cpp:2423
+#: src/slic3r/GUI/Plater.cpp:3636
 msgid "Slice now"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:873
+#: src/slic3r/GUI/Plater.cpp:880
 msgid "Hold Shift to Slice & Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:974
+#: src/slic3r/GUI/Plater.cpp:981
 #, possible-c-format
 msgid "%d (%d shells)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:979
+#: src/slic3r/GUI/Plater.cpp:986
 #, possible-c-format
 msgid "Auto-repaired (%d errors)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:982
+#: src/slic3r/GUI/Plater.cpp:989
 #, possible-c-format
 msgid ""
 "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
 "facets reversed, %d backwards edges"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:992
+#: src/slic3r/GUI/Plater.cpp:999
 msgid "Yes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1015
+#: src/slic3r/GUI/Plater.cpp:1022
 msgid "Used Material (ml)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1018
+#: src/slic3r/GUI/Plater.cpp:1025
 msgid "object(s)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1018
+#: src/slic3r/GUI/Plater.cpp:1025
 msgid "supports and pad"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1043 src/slic3r/GUI/Plater.cpp:1058
+#: src/slic3r/GUI/Plater.cpp:1050 src/slic3r/GUI/Plater.cpp:1065
 msgid "objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1043 src/slic3r/GUI/Plater.cpp:1058
+#: src/slic3r/GUI/Plater.cpp:1050 src/slic3r/GUI/Plater.cpp:1065
 msgid "wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1073
+#: src/slic3r/GUI/Plater.cpp:1080
 msgid "normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1077
-msgid "silent mode"
+#: src/slic3r/GUI/Plater.cpp:1084
+msgid "stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1590
+#: src/slic3r/GUI/Plater.cpp:1601
 msgid "Loading"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1600
+#: src/slic3r/GUI/Plater.cpp:1611
 #, possible-c-format
 msgid "Processing input file %s\n"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1658
+#: src/slic3r/GUI/Plater.cpp:1669
 msgid ""
 "This file contains several objects positioned at multiple heights. Instead "
 "of considering them as multiple objects, should I consider\n"
 "this file as a single object having multiple parts?\n"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1661 src/slic3r/GUI/Plater.cpp:1769
+#: src/slic3r/GUI/Plater.cpp:1672 src/slic3r/GUI/Plater.cpp:1780
 msgid "Multi-part object detected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1712
+#: src/slic3r/GUI/Plater.cpp:1723
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?\n"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1713
+#: src/slic3r/GUI/Plater.cpp:1724
 msgid "Detected advanced data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1746
+#: src/slic3r/GUI/Plater.cpp:1757
 #, possible-c-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
 "is(are) multi-part"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1766
+#: src/slic3r/GUI/Plater.cpp:1777
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?\n"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1782
+#: src/slic3r/GUI/Plater.cpp:1793
 msgid "Loaded"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1874
+#: src/slic3r/GUI/Plater.cpp:1885
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1875
+#: src/slic3r/GUI/Plater.cpp:1886
 msgid "Object too large?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1925
+#: src/slic3r/GUI/Plater.cpp:1936
 msgid "Export STL file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1932
+#: src/slic3r/GUI/Plater.cpp:1943
 msgid "Export AMF file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1938
+#: src/slic3r/GUI/Plater.cpp:1949
 msgid "Save file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2103
+#: src/slic3r/GUI/Plater.cpp:2114
 msgid "Arranging canceled"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2106
+#: src/slic3r/GUI/Plater.cpp:2117
 msgid "Arranging"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2140
+#: src/slic3r/GUI/Plater.cpp:2151
 msgid "Could not arrange model objects! Some geometries may be invalid."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2144
+#: src/slic3r/GUI/Plater.cpp:2155
 msgid "Arranging done."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2185
+#: src/slic3r/GUI/Plater.cpp:2196
 msgid "Orientation search canceled"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2190
+#: src/slic3r/GUI/Plater.cpp:2201
 msgid "Searching for optimal orientation"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2251
+#: src/slic3r/GUI/Plater.cpp:2262
 msgid "Orientation found."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2271
+#: src/slic3r/GUI/Plater.cpp:2282
 msgid ""
 "The selected object can't be split because it contains more than one volume/"
 "material."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2397
+#: src/slic3r/GUI/Plater.cpp:2408
 msgid "Invalid data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2406
+#: src/slic3r/GUI/Plater.cpp:2417
 msgid "Ready to slice"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2444 src/slic3r/GUI/PrintHostDialogs.cpp:231
+#: src/slic3r/GUI/Plater.cpp:2455 src/slic3r/GUI/PrintHostDialogs.cpp:231
 msgid "Cancelling"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2461
+#: src/slic3r/GUI/Plater.cpp:2472
 msgid "Another export job is currently running."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2722
+#: src/slic3r/GUI/Plater.cpp:2733
 msgid "Export failed"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2727 src/slic3r/GUI/PrintHostDialogs.cpp:232
+#: src/slic3r/GUI/Plater.cpp:2738 src/slic3r/GUI/PrintHostDialogs.cpp:232
 msgid "Cancelled"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2813 src/slic3r/GUI/Plater.cpp:2825
-#: src/slic3r/GUI/Plater.cpp:2897
+#: src/slic3r/GUI/Plater.cpp:2824 src/slic3r/GUI/Plater.cpp:2836
+#: src/slic3r/GUI/Plater.cpp:2914
 msgid "Increase copies"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2891 src/slic3r/GUI/Plater.cpp:2909
+#: src/slic3r/GUI/Plater.cpp:2908 src/slic3r/GUI/Plater.cpp:2926
 msgid "Remove the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2897
+#: src/slic3r/GUI/Plater.cpp:2914
 msgid "Place one more copy of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2899
+#: src/slic3r/GUI/Plater.cpp:2916
 msgid "Decrease copies"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2899
+#: src/slic3r/GUI/Plater.cpp:2916
 msgid "Remove one copy of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2901
+#: src/slic3r/GUI/Plater.cpp:2918
 msgid "Set number of copies"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2901
+#: src/slic3r/GUI/Plater.cpp:2918
 msgid "Change the number of copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2924
+#: src/slic3r/GUI/Plater.cpp:2941
 msgid "Reload from Disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2924
+#: src/slic3r/GUI/Plater.cpp:2941
 msgid "Reload the selected file from Disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2927
+#: src/slic3r/GUI/Plater.cpp:2944
 msgid "Export the selected object as STL file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2939
+#: src/slic3r/GUI/Plater.cpp:2956
 msgid "Along X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2939
+#: src/slic3r/GUI/Plater.cpp:2956
 msgid "Mirror the selected object along the X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2941
+#: src/slic3r/GUI/Plater.cpp:2958
 msgid "Along Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2941
+#: src/slic3r/GUI/Plater.cpp:2958
 msgid "Mirror the selected object along the Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2943
+#: src/slic3r/GUI/Plater.cpp:2960
 msgid "Along Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2943
+#: src/slic3r/GUI/Plater.cpp:2960
 msgid "Mirror the selected object along the Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2946
+#: src/slic3r/GUI/Plater.cpp:2963
 msgid "Mirror"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2946
+#: src/slic3r/GUI/Plater.cpp:2963
 msgid "Mirror the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2966
+#: src/slic3r/GUI/Plater.cpp:2983
 msgid "To objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2966 src/slic3r/GUI/Plater.cpp:2988
+#: src/slic3r/GUI/Plater.cpp:2983 src/slic3r/GUI/Plater.cpp:3005
 msgid "Split the selected object into individual objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2968
+#: src/slic3r/GUI/Plater.cpp:2985
 msgid "To parts"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2968 src/slic3r/GUI/Plater.cpp:3008
+#: src/slic3r/GUI/Plater.cpp:2985 src/slic3r/GUI/Plater.cpp:3025
 msgid "Split the selected object into individual sub-parts"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2971 src/slic3r/GUI/Plater.cpp:2988
-#: src/slic3r/GUI/Plater.cpp:3008 src/libslic3r/PrintConfig.cpp:3082
+#: src/slic3r/GUI/Plater.cpp:2988 src/slic3r/GUI/Plater.cpp:3005
+#: src/slic3r/GUI/Plater.cpp:3025 src/libslic3r/PrintConfig.cpp:3108
 msgid "Split"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2971
+#: src/slic3r/GUI/Plater.cpp:2988
 msgid "Split the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2994
+#: src/slic3r/GUI/Plater.cpp:3011
 msgid "Optimize orientation"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2994
+#: src/slic3r/GUI/Plater.cpp:3011
 msgid "Optimize the rotation of the object for better print results."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3298
-msgid "All objects will be removed, continue ?"
+#: src/slic3r/GUI/Plater.cpp:3074
+msgid "3D editor view"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3298
-msgid "Delete all"
+#: src/slic3r/GUI/Plater.cpp:3085 src/slic3r/GUI/Tab.cpp:2289
+msgid "Preview"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3316
+msgid "All objects will be removed, continue ?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3433
+#: src/slic3r/GUI/Plater.cpp:3451
 msgid "Save G-code file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3433
+#: src/slic3r/GUI/Plater.cpp:3451
 msgid "Save SL1 file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3545
+#: src/slic3r/GUI/Plater.cpp:3563
 #, possible-c-format
 msgid "STL file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3561
+#: src/slic3r/GUI/Plater.cpp:3579
 #, possible-c-format
 msgid "AMF file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3564
+#: src/slic3r/GUI/Plater.cpp:3582
 #, possible-c-format
 msgid "Error exporting AMF file %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3590
+#: src/slic3r/GUI/Plater.cpp:3608
 #, possible-c-format
 msgid "3MF file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3593
+#: src/slic3r/GUI/Plater.cpp:3611
 #, possible-c-format
 msgid "Error exporting 3MF file %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3822
+#: src/slic3r/GUI/Plater.cpp:3840
 msgid "Send G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:19 src/slic3r/GUI/Tab.cpp:1812
-#: src/slic3r/GUI/Tab.cpp:2013
+#: src/slic3r/GUI/Preferences.cpp:19 src/slic3r/GUI/Tab.cpp:1813
+#: src/slic3r/GUI/Tab.cpp:2014
 msgid "General"
 msgstr ""
 
@@ -2883,7 +2978,7 @@ msgstr ""
 msgid "User presets"
 msgstr ""
 
-#: src/slic3r/GUI/Preset.cpp:1003 src/slic3r/GUI/Tab.cpp:237
+#: src/slic3r/GUI/Preset.cpp:1003 src/slic3r/GUI/Tab.cpp:238
 msgid "Add a new printer"
 msgstr ""
 
@@ -2891,6 +2986,10 @@ msgstr ""
 msgid "filament"
 msgstr ""
 
+#: src/slic3r/GUI/Preset.cpp:1276
+msgid "SLA print"
+msgstr ""
+
 #: src/slic3r/GUI/PresetHints.cpp:28
 #, possible-c-format
 msgid ""
@@ -3033,6 +3132,30 @@ msgstr ""
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 
+#: src/slic3r/GUI/PrintHostDialogs.cpp:148
+msgid "ID"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:149
+msgid "Progress"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:150
+msgid "Status"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:151
+msgid "Host"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:152
+msgid "Filename"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:153
+msgid "Error Message"
+msgstr ""
+
 #: src/slic3r/GUI/PrintHostDialogs.cpp:156
 msgid "Cancel selected"
 msgstr ""
@@ -3067,10 +3190,10 @@ msgid "Time"
 msgstr ""
 
 #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/RammingChart.cpp:81
-#: src/slic3r/GUI/WipeTowerDialog.cpp:82 src/libslic3r/PrintConfig.cpp:612
-#: src/libslic3r/PrintConfig.cpp:656 src/libslic3r/PrintConfig.cpp:671
-#: src/libslic3r/PrintConfig.cpp:2243 src/libslic3r/PrintConfig.cpp:2252
-#: src/libslic3r/PrintConfig.cpp:2312 src/libslic3r/PrintConfig.cpp:2319
+#: src/slic3r/GUI/WipeTowerDialog.cpp:82 src/libslic3r/PrintConfig.cpp:613
+#: src/libslic3r/PrintConfig.cpp:657 src/libslic3r/PrintConfig.cpp:672
+#: src/libslic3r/PrintConfig.cpp:2268 src/libslic3r/PrintConfig.cpp:2277
+#: src/libslic3r/PrintConfig.cpp:2337 src/libslic3r/PrintConfig.cpp:2344
 msgid "s"
 msgstr ""
 
@@ -3082,211 +3205,211 @@ msgstr ""
 msgid "System Information"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:50 src/libslic3r/PrintConfig.cpp:229
+#: src/slic3r/GUI/Tab.cpp:51 src/libslic3r/PrintConfig.cpp:230
 msgid "Compatible printers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:51
+#: src/slic3r/GUI/Tab.cpp:52
 msgid "Select the printers this profile is compatible with."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:56 src/libslic3r/PrintConfig.cpp:244
+#: src/slic3r/GUI/Tab.cpp:57 src/libslic3r/PrintConfig.cpp:245
 msgid "Compatible print profiles"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:57
+#: src/slic3r/GUI/Tab.cpp:58
 msgid "Select the print profiles this profile is compatible with."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:130
+#: src/slic3r/GUI/Tab.cpp:131
 msgid "Save current "
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:131
+#: src/slic3r/GUI/Tab.cpp:132
 msgid "Delete this preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:136
+#: src/slic3r/GUI/Tab.cpp:137
 msgid ""
 "Hover the cursor over buttons to find more information \n"
 "or click this button."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:907
+#: src/slic3r/GUI/Tab.cpp:915
 msgid "It's a default preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:908
+#: src/slic3r/GUI/Tab.cpp:916
 msgid "It's a system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:909
+#: src/slic3r/GUI/Tab.cpp:917
 msgid "Current preset is inherited from "
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:914
+#: src/slic3r/GUI/Tab.cpp:922
 msgid "It can't be deleted or modified. "
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:915
+#: src/slic3r/GUI/Tab.cpp:923
 msgid ""
 "Any modifications should be saved as a new preset inherited from this one. "
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:916
+#: src/slic3r/GUI/Tab.cpp:924
 msgid "To do that please specify a new name for the preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:920
+#: src/slic3r/GUI/Tab.cpp:928
 msgid "Additional information:"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:926
+#: src/slic3r/GUI/Tab.cpp:934
 msgid "printer model"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:934
+#: src/slic3r/GUI/Tab.cpp:942
 msgid "default print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:937
+#: src/slic3r/GUI/Tab.cpp:945
 msgid "default filament profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:951
+#: src/slic3r/GUI/Tab.cpp:959
 msgid "default SLA material profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:955
+#: src/slic3r/GUI/Tab.cpp:963
 msgid "default SLA print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:997 src/slic3r/GUI/Tab.cpp:3391
+#: src/slic3r/GUI/Tab.cpp:998 src/slic3r/GUI/Tab.cpp:3396
 msgid "Layers and perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:998 src/libslic3r/PrintConfig.cpp:55
+#: src/slic3r/GUI/Tab.cpp:999 src/libslic3r/PrintConfig.cpp:56
 msgid "Layer height"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1002
+#: src/slic3r/GUI/Tab.cpp:1003
 msgid "Vertical shells"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1013
+#: src/slic3r/GUI/Tab.cpp:1014
 msgid "Horizontal shells"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1014 src/libslic3r/PrintConfig.cpp:1710
+#: src/slic3r/GUI/Tab.cpp:1015 src/libslic3r/PrintConfig.cpp:1735
 msgid "Solid layers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1019
+#: src/slic3r/GUI/Tab.cpp:1020
 msgid "Quality (slower slicing)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1037
+#: src/slic3r/GUI/Tab.cpp:1038
 msgid "Reducing printing time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1049
+#: src/slic3r/GUI/Tab.cpp:1050
 msgid "Skirt and brim"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1066
+#: src/slic3r/GUI/Tab.cpp:1067
 msgid "Raft"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1070
+#: src/slic3r/GUI/Tab.cpp:1071
 msgid "Options for support material and raft"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1085
+#: src/slic3r/GUI/Tab.cpp:1086
 msgid "Speed for print moves"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1097
+#: src/slic3r/GUI/Tab.cpp:1098
 msgid "Speed for non-print moves"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1100
+#: src/slic3r/GUI/Tab.cpp:1101
 msgid "Modifiers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1103
+#: src/slic3r/GUI/Tab.cpp:1104
 msgid "Acceleration control (advanced)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1110
+#: src/slic3r/GUI/Tab.cpp:1111
 msgid "Autospeed (advanced)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1118
+#: src/slic3r/GUI/Tab.cpp:1119
 msgid "Multiple Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1126
+#: src/slic3r/GUI/Tab.cpp:1127
 msgid "Ooze prevention"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1143
+#: src/slic3r/GUI/Tab.cpp:1144
 msgid "Extrusion width"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1153
+#: src/slic3r/GUI/Tab.cpp:1154
 msgid "Overlap"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1156
+#: src/slic3r/GUI/Tab.cpp:1157
 msgid "Flow"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1165
+#: src/slic3r/GUI/Tab.cpp:1166
 msgid "Other"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1168 src/slic3r/GUI/Tab.cpp:3439
+#: src/slic3r/GUI/Tab.cpp:1169 src/slic3r/GUI/Tab.cpp:3444
 msgid "Output options"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1169
+#: src/slic3r/GUI/Tab.cpp:1170
 msgid "Sequential printing"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1171
+#: src/slic3r/GUI/Tab.cpp:1172
 msgid "Extruder clearance (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1180 src/slic3r/GUI/Tab.cpp:3440
+#: src/slic3r/GUI/Tab.cpp:1181 src/slic3r/GUI/Tab.cpp:3445
 msgid "Output file"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1187 src/libslic3r/PrintConfig.cpp:1383
+#: src/slic3r/GUI/Tab.cpp:1188 src/libslic3r/PrintConfig.cpp:1408
 msgid "Post-processing scripts"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1193 src/slic3r/GUI/Tab.cpp:1194
-#: src/slic3r/GUI/Tab.cpp:1576 src/slic3r/GUI/Tab.cpp:1577
-#: src/slic3r/GUI/Tab.cpp:1985 src/slic3r/GUI/Tab.cpp:1986
-#: src/slic3r/GUI/Tab.cpp:2079 src/slic3r/GUI/Tab.cpp:2080
-#: src/slic3r/GUI/Tab.cpp:3328 src/slic3r/GUI/Tab.cpp:3329
+#: src/slic3r/GUI/Tab.cpp:1194 src/slic3r/GUI/Tab.cpp:1195
+#: src/slic3r/GUI/Tab.cpp:1577 src/slic3r/GUI/Tab.cpp:1578
+#: src/slic3r/GUI/Tab.cpp:1986 src/slic3r/GUI/Tab.cpp:1987
+#: src/slic3r/GUI/Tab.cpp:2080 src/slic3r/GUI/Tab.cpp:2081
+#: src/slic3r/GUI/Tab.cpp:3333 src/slic3r/GUI/Tab.cpp:3334
 msgid "Notes"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1200 src/slic3r/GUI/Tab.cpp:1584
-#: src/slic3r/GUI/Tab.cpp:1992 src/slic3r/GUI/Tab.cpp:2086
-#: src/slic3r/GUI/Tab.cpp:3336 src/slic3r/GUI/Tab.cpp:3445
+#: src/slic3r/GUI/Tab.cpp:1201 src/slic3r/GUI/Tab.cpp:1585
+#: src/slic3r/GUI/Tab.cpp:1993 src/slic3r/GUI/Tab.cpp:2087
+#: src/slic3r/GUI/Tab.cpp:3341 src/slic3r/GUI/Tab.cpp:3450
 msgid "Dependencies"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1201 src/slic3r/GUI/Tab.cpp:1585
-#: src/slic3r/GUI/Tab.cpp:1993 src/slic3r/GUI/Tab.cpp:2087
-#: src/slic3r/GUI/Tab.cpp:3337 src/slic3r/GUI/Tab.cpp:3446
+#: src/slic3r/GUI/Tab.cpp:1202 src/slic3r/GUI/Tab.cpp:1586
+#: src/slic3r/GUI/Tab.cpp:1994 src/slic3r/GUI/Tab.cpp:2088
+#: src/slic3r/GUI/Tab.cpp:3342 src/slic3r/GUI/Tab.cpp:3451
 msgid "Profile dependencies"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1247
-#, no-c-format
+#: src/slic3r/GUI/Tab.cpp:1248
+#, possible-c-format
 msgid ""
 "The Spiral Vase mode requires:\n"
 "- one perimeter\n"
@@ -3298,11 +3421,11 @@ msgid ""
 "Shall I adjust those settings in order to enable Spiral Vase?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1254
+#: src/slic3r/GUI/Tab.cpp:1255
 msgid "Spiral Vase"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1277
+#: src/slic3r/GUI/Tab.cpp:1278
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only\n"
 "if they are printed with the current extruder without triggering a tool "
@@ -3313,11 +3436,11 @@ msgid ""
 "Shall I adjust those settings in order to enable the Wipe Tower?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1281 src/slic3r/GUI/Tab.cpp:1298
+#: src/slic3r/GUI/Tab.cpp:1282 src/slic3r/GUI/Tab.cpp:1299
 msgid "Wipe Tower"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1295
+#: src/slic3r/GUI/Tab.cpp:1296
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers\n"
 "need to be synchronized with the object layers.\n"
@@ -3325,7 +3448,7 @@ msgid ""
 "Shall I synchronize support layers in order to enable the Wipe Tower?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1313
+#: src/slic3r/GUI/Tab.cpp:1314
 msgid ""
 "Supports work better, if the following feature is enabled:\n"
 "- Detect bridging perimeters\n"
@@ -3333,116 +3456,112 @@ msgid ""
 "Shall I adjust those settings for supports?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1316
+#: src/slic3r/GUI/Tab.cpp:1317
 msgid "Support Generator"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1358
+#: src/slic3r/GUI/Tab.cpp:1359
 msgid "The "
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1358
-#, no-c-format
+#: src/slic3r/GUI/Tab.cpp:1359
+#, possible-c-format
 msgid ""
 " infill pattern is not supposed to work at 100% density.\n"
 "\n"
 "Shall I switch to rectilinear fill pattern?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1478
+#: src/slic3r/GUI/Tab.cpp:1479
 msgid "Temperature "
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1484
+#: src/slic3r/GUI/Tab.cpp:1485
 msgid "Bed"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1489
+#: src/slic3r/GUI/Tab.cpp:1490
 msgid "Cooling"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1490 src/libslic3r/PrintConfig.cpp:1286
-#: src/libslic3r/PrintConfig.cpp:2099
+#: src/slic3r/GUI/Tab.cpp:1491 src/libslic3r/PrintConfig.cpp:1311
+#: src/libslic3r/PrintConfig.cpp:2124
 msgid "Enable"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1501
+#: src/slic3r/GUI/Tab.cpp:1502
 msgid "Fan settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1502
+#: src/slic3r/GUI/Tab.cpp:1503
 msgid "Fan speed"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1510
+#: src/slic3r/GUI/Tab.cpp:1511
 msgid "Cooling thresholds"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1516
+#: src/slic3r/GUI/Tab.cpp:1517
 msgid "Filament properties"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1520
+#: src/slic3r/GUI/Tab.cpp:1521
 msgid "Print speed override"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1530
+#: src/slic3r/GUI/Tab.cpp:1531
 msgid "Toolchange parameters with single extruder MM printers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1545
+#: src/slic3r/GUI/Tab.cpp:1546
 msgid "Ramming settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1563 src/slic3r/GUI/Tab.cpp:1948
+#: src/slic3r/GUI/Tab.cpp:1564 src/slic3r/GUI/Tab.cpp:1949
 msgid "Custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1564 src/slic3r/GUI/Tab.cpp:1949
-#: src/libslic3r/PrintConfig.cpp:1736 src/libslic3r/PrintConfig.cpp:1751
+#: src/slic3r/GUI/Tab.cpp:1565 src/slic3r/GUI/Tab.cpp:1950
+#: src/libslic3r/PrintConfig.cpp:1761 src/libslic3r/PrintConfig.cpp:1776
 msgid "Start G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1570 src/slic3r/GUI/Tab.cpp:1955
-#: src/libslic3r/PrintConfig.cpp:359 src/libslic3r/PrintConfig.cpp:369
+#: src/slic3r/GUI/Tab.cpp:1571 src/slic3r/GUI/Tab.cpp:1956
+#: src/libslic3r/PrintConfig.cpp:360 src/libslic3r/PrintConfig.cpp:370
 msgid "End G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1681
-msgid "Browse"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1700 src/slic3r/GUI/Tab.cpp:1888
+#: src/slic3r/GUI/Tab.cpp:1701 src/slic3r/GUI/Tab.cpp:1889
 msgid "Test"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1710
+#: src/slic3r/GUI/Tab.cpp:1711
 msgid "Could not get a valid Printer Host reference"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1716 src/slic3r/GUI/Tab.cpp:1901
+#: src/slic3r/GUI/Tab.cpp:1717 src/slic3r/GUI/Tab.cpp:1902
 msgid "Success!"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1731
+#: src/slic3r/GUI/Tab.cpp:1732
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1737
+#: src/slic3r/GUI/Tab.cpp:1738
 msgid " Browse "
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1744
+#: src/slic3r/GUI/Tab.cpp:1745
 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1745
+#: src/slic3r/GUI/Tab.cpp:1746
 msgid "Open CA certificate file"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1773
+#: src/slic3r/GUI/Tab.cpp:1774
 #, possible-c-format
 msgid ""
 "HTTPS CA File:\n"
@@ -3452,299 +3571,307 @@ msgid ""
 "Store / Keychain."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1813 src/slic3r/GUI/Tab.cpp:2014
+#: src/slic3r/GUI/Tab.cpp:1814 src/slic3r/GUI/Tab.cpp:2015
 msgid "Size and coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1818 src/slic3r/GUI/Tab.cpp:2019
-#: src/slic3r/GUI/Tab.cpp:2988
+#: src/slic3r/GUI/Tab.cpp:1819 src/slic3r/GUI/Tab.cpp:2020
+#: src/slic3r/GUI/Tab.cpp:2989
 msgid " Set "
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1840
+#: src/slic3r/GUI/Tab.cpp:1841
 msgid "Capabilities"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1845
+#: src/slic3r/GUI/Tab.cpp:1846
 msgid "Number of extruders of the printer."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1873
+#: src/slic3r/GUI/Tab.cpp:1874
 msgid "USB/Serial connection"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1874 src/libslic3r/PrintConfig.cpp:1591
+#: src/slic3r/GUI/Tab.cpp:1875 src/libslic3r/PrintConfig.cpp:1616
 msgid "Serial port"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1879
+#: src/slic3r/GUI/Tab.cpp:1880
 msgid "Rescan serial ports"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1901
+#: src/slic3r/GUI/Tab.cpp:1902
 msgid "Connection to printer works correctly."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1904
+#: src/slic3r/GUI/Tab.cpp:1905
 msgid "Connection failed."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1917 src/slic3r/GUI/Tab.cpp:2074
+#: src/slic3r/GUI/Tab.cpp:1918 src/slic3r/GUI/Tab.cpp:2075
 msgid "Print Host upload"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1961 src/libslic3r/PrintConfig.cpp:128
+#: src/slic3r/GUI/Tab.cpp:1962 src/libslic3r/PrintConfig.cpp:129
 msgid "Before layer change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1967 src/libslic3r/PrintConfig.cpp:1031
+#: src/slic3r/GUI/Tab.cpp:1968 src/libslic3r/PrintConfig.cpp:1032
 msgid "After layer change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1973 src/libslic3r/PrintConfig.cpp:2006
+#: src/slic3r/GUI/Tab.cpp:1974 src/libslic3r/PrintConfig.cpp:2031
 msgid "Tool change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1979
+#: src/slic3r/GUI/Tab.cpp:1980
 msgid "Between objects G-code (for sequential printing)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2041
+#: src/slic3r/GUI/Tab.cpp:2042
 msgid "Display"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2052
+#: src/slic3r/GUI/Tab.cpp:2053
 msgid "Tilt"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2053
+#: src/slic3r/GUI/Tab.cpp:2054
 msgid "Tilt time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2059 src/slic3r/GUI/Tab.cpp:3310
+#: src/slic3r/GUI/Tab.cpp:2060 src/slic3r/GUI/Tab.cpp:3315
 msgid "Corrections"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2136 src/slic3r/GUI/Tab.cpp:2209
-#: src/libslic3r/PrintConfig.cpp:1077 src/libslic3r/PrintConfig.cpp:1087
-#: src/libslic3r/PrintConfig.cpp:1097 src/libslic3r/PrintConfig.cpp:1110
-#: src/libslic3r/PrintConfig.cpp:1121 src/libslic3r/PrintConfig.cpp:1132
-#: src/libslic3r/PrintConfig.cpp:1143
+#: src/slic3r/GUI/Tab.cpp:2137 src/slic3r/GUI/Tab.cpp:2210
+#: src/libslic3r/PrintConfig.cpp:1082 src/libslic3r/PrintConfig.cpp:1100
+#: src/libslic3r/PrintConfig.cpp:1118 src/libslic3r/PrintConfig.cpp:1135
+#: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:1157
+#: src/libslic3r/PrintConfig.cpp:1168
 msgid "Machine limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2150
-msgid "Values in this column are for Full Power mode"
-msgstr ""
-
 #: src/slic3r/GUI/Tab.cpp:2151
-msgid "Full Power"
+msgid "Values in this column are for Normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2156
-msgid "Values in this column are for Silent mode"
+#: src/slic3r/GUI/Tab.cpp:2152
+msgid "Normal"
 msgstr ""
 
 #: src/slic3r/GUI/Tab.cpp:2157
-msgid "Silent"
+msgid "Values in this column are for Stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2165
+#: src/slic3r/GUI/Tab.cpp:2158
+msgid "Stealth"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2166
 msgid "Maximum feedrates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2170
+#: src/slic3r/GUI/Tab.cpp:2171
 msgid "Maximum accelerations"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2177
+#: src/slic3r/GUI/Tab.cpp:2178
 msgid "Jerk limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2182
+#: src/slic3r/GUI/Tab.cpp:2183
 msgid "Minimum feedrates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2231 src/slic3r/GUI/Tab.cpp:2239
+#: src/slic3r/GUI/Tab.cpp:2232 src/slic3r/GUI/Tab.cpp:2240
 msgid "Single extruder MM setup"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2240
+#: src/slic3r/GUI/Tab.cpp:2241
 msgid "Single extruder multimaterial parameters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2253 src/libslic3r/GCode/PreviewData.cpp:475
+#: src/slic3r/GUI/Tab.cpp:2254 src/libslic3r/GCode/PreviewData.cpp:475
 #, possible-c-format
 msgid "Extruder %d"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2260
+#: src/slic3r/GUI/Tab.cpp:2261
 msgid "Layer height limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2265
+#: src/slic3r/GUI/Tab.cpp:2266
 msgid "Position (for multi-extruder printers)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2268
+#: src/slic3r/GUI/Tab.cpp:2269
 msgid "Retraction"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2271
+#: src/slic3r/GUI/Tab.cpp:2272
 msgid "Only lift Z"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2284
+#: src/slic3r/GUI/Tab.cpp:2285
 msgid ""
 "Retraction when tool is disabled (advanced settings for multi-extruder "
 "setups)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2288
-msgid "Preview"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2429
+#: src/slic3r/GUI/Tab.cpp:2430
 msgid ""
 "The Wipe option is not available when using the Firmware Retraction mode.\n"
 "\n"
 "Shall I disable it in order to enable Firmware Retraction?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2431
+#: src/slic3r/GUI/Tab.cpp:2432
 msgid "Firmware Retraction"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2757
+#: src/slic3r/GUI/Tab.cpp:2758
 #, possible-c-format
 msgid "Default preset (%s)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2758
+#: src/slic3r/GUI/Tab.cpp:2759
 #, possible-c-format
 msgid "Preset (%s)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2775
+#: src/slic3r/GUI/Tab.cpp:2776
 msgid "has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2778
+#: src/slic3r/GUI/Tab.cpp:2779
 msgid "is not compatible with printer"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2779
+#: src/slic3r/GUI/Tab.cpp:2780
 msgid "is not compatible with print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2781
+#: src/slic3r/GUI/Tab.cpp:2782
 msgid "and it has the following unsaved changes:"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2784
-msgid "Discard changes and continue anyway?"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2785
+#: src/slic3r/GUI/Tab.cpp:2786
 msgid "Unsaved Changes"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2797
+#: src/slic3r/GUI/Tab.cpp:2798
 msgid "Please check your object list before preset changing."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2878
-msgid "Copy"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2900
+#: src/slic3r/GUI/Tab.cpp:2901
 msgid "The supplied name is empty. It can't be saved."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2905
+#: src/slic3r/GUI/Tab.cpp:2906
 msgid "Cannot overwrite a system profile."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2909
+#: src/slic3r/GUI/Tab.cpp:2910
 msgid "Cannot overwrite an external profile."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2935
+#: src/slic3r/GUI/Tab.cpp:2936
 msgid "remove"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2935
+#: src/slic3r/GUI/Tab.cpp:2936
 msgid "delete"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2936
+#: src/slic3r/GUI/Tab.cpp:2937
 msgid "Are you sure you want to "
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2936
+#: src/slic3r/GUI/Tab.cpp:2937
 msgid " the selected preset?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2937
+#: src/slic3r/GUI/Tab.cpp:2938
 msgid "Remove"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2938
+#: src/slic3r/GUI/Tab.cpp:2939
 msgid " Preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3064
-msgid ""
-"LOCKED LOCK;indicates that the settings are the same as the system values "
-"for the current option group"
+#: src/slic3r/GUI/Tab.cpp:3065
+msgid "LOCKED LOCK"
 msgstr ""
 
+#. TRN Description for "LOCKED LOCK"
 #: src/slic3r/GUI/Tab.cpp:3067
 msgid ""
-"UNLOCKED LOCK;indicates that some settings were changed and are not equal to "
-"the system values for the current option group.\n"
+"indicates that the settings are the same as the system values for the "
+"current option group"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3069
+msgid "UNLOCKED LOCK"
+msgstr ""
+
+#. TRN Description for "UNLOCKED LOCK"
+#: src/slic3r/GUI/Tab.cpp:3071
+msgid ""
+"indicates that some settings were changed and are not equal to the system "
+"values for the current option group.\n"
 "Click the UNLOCKED LOCK icon to reset all settings for current option group "
 "to the system values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3073
+#: src/slic3r/GUI/Tab.cpp:3076
+msgid "WHITE BULLET"
+msgstr ""
+
+#. TRN Description for "WHITE BULLET"
+#: src/slic3r/GUI/Tab.cpp:3078
 msgid ""
-"WHITE BULLET;for the left button: \tindicates a non-system preset,\n"
+"for the left button: \tindicates a non-system preset,\n"
 "for the right button: \tindicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3077
+#: src/slic3r/GUI/Tab.cpp:3081
+msgid "BACK ARROW"
+msgstr ""
+
+#. TRN Description for "BACK ARROW"
+#: src/slic3r/GUI/Tab.cpp:3083
 msgid ""
-"BACK ARROW;indicates that the settings were changed and are not equal to the "
-"last saved preset for the current option group.\n"
+"indicates that the settings were changed and are not equal to the last saved "
+"preset for the current option group.\n"
 "Click the BACK ARROW icon to reset all settings for the current option group "
 "to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3103
+#: src/slic3r/GUI/Tab.cpp:3108
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system "
 "values for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3105
+#: src/slic3r/GUI/Tab.cpp:3110
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system values for the current option group.\n"
 "Click to reset all settings for current option group to the system values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3108
+#: src/slic3r/GUI/Tab.cpp:3113
 msgid "WHITE BULLET icon indicates a non system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3111
+#: src/slic3r/GUI/Tab.cpp:3116
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3113
+#: src/slic3r/GUI/Tab.cpp:3118
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -3752,104 +3879,104 @@ msgid ""
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3119
+#: src/slic3r/GUI/Tab.cpp:3124
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3120
+#: src/slic3r/GUI/Tab.cpp:3125
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system value.\n"
 "Click to reset current value to the system value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3126
+#: src/slic3r/GUI/Tab.cpp:3131
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3127
+#: src/slic3r/GUI/Tab.cpp:3132
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
 "Click to reset current value to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3239
+#: src/slic3r/GUI/Tab.cpp:3244
 msgid " as:"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3283
+#: src/slic3r/GUI/Tab.cpp:3288
 msgid "the following postfix are not allowed:"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3287
+#: src/slic3r/GUI/Tab.cpp:3292
 msgid "The supplied name is not available."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3300
+#: src/slic3r/GUI/Tab.cpp:3305
 msgid "Material"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3302 src/slic3r/GUI/Tab.cpp:3393
+#: src/slic3r/GUI/Tab.cpp:3307 src/slic3r/GUI/Tab.cpp:3398
 msgid "Layers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3306
+#: src/slic3r/GUI/Tab.cpp:3311
 msgid "Exposure"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3401
+#: src/slic3r/GUI/Tab.cpp:3406
 msgid "Support head"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3406
+#: src/slic3r/GUI/Tab.cpp:3411
 msgid "Support pillar"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3416
+#: src/slic3r/GUI/Tab.cpp:3421
 msgid "Connection of the support sticks and junctions"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3421
+#: src/slic3r/GUI/Tab.cpp:3426
 msgid "Automatic generation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3483
+#: src/slic3r/GUI/Tab.cpp:3488
 msgid "Head penetration should not be greater than the head width."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3484
+#: src/slic3r/GUI/Tab.cpp:3489
 msgid "Invalid Head penetration"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3496
+#: src/slic3r/GUI/Tab.cpp:3501
 msgid "Pinhead diameter should be smaller than the pillar diameter."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3497
+#: src/slic3r/GUI/Tab.cpp:3502
 msgid "Invalid pinhead diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:317 src/slic3r/GUI/Tab.hpp:405
+#: src/slic3r/GUI/Tab.hpp:315 src/slic3r/GUI/Tab.hpp:403
 msgid "Print Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:335
+#: src/slic3r/GUI/Tab.hpp:333
 msgid "Filament Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:368
+#: src/slic3r/GUI/Tab.hpp:366
 msgid "Printer Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:391
+#: src/slic3r/GUI/Tab.hpp:389
 msgid "Material Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:417
+#: src/slic3r/GUI/Tab.hpp:415
 msgid "Save preset"
 msgstr ""
 
@@ -4046,21 +4173,21 @@ msgstr ""
 msgid "Show advanced settings"
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:358
+#: src/slic3r/GUI/wxExtensions.cpp:400
 msgid "Instances"
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:365
+#: src/slic3r/GUI/wxExtensions.cpp:407 src/slic3r/GUI/wxExtensions.cpp:474
 #, possible-c-format
-msgid "Instance_%d"
+msgid "Instance %d"
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:2412
+#: src/slic3r/GUI/wxExtensions.cpp:2462
 #, possible-c-format
 msgid "Switch to the %s mode"
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:2413
+#: src/slic3r/GUI/wxExtensions.cpp:2463
 #, possible-c-format
 msgid "Current mode is %s"
 msgstr ""
@@ -4103,7 +4230,7 @@ msgid "Note: OctoPrint version at least 1.1.0 is required."
 msgstr ""
 
 #: src/slic3r/Utils/OctoPrint.cpp:195
-msgid "Connection to Prusa SLA works correctly."
+msgid "Connection to Prusa SL1 works correctly."
 msgstr ""
 
 #: src/slic3r/Utils/OctoPrint.cpp:200
@@ -4378,7 +4505,7 @@ msgstr ""
 #: src/libslic3r/Print.cpp:1223
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
-"layer heigths"
+"layer heights"
 msgstr ""
 
 #: src/libslic3r/Print.cpp:1225
@@ -4460,59 +4587,63 @@ msgstr ""
 msgid "Generating brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1517
+#: src/libslic3r/Print.cpp:1520
 msgid "Exporting G-code"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:55
+#: src/libslic3r/Print.cpp:1524
+msgid "Generating G-code"
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:57
 msgid "Slicing model"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:56 src/libslic3r/SLAPrint.cpp:809
+#: src/libslic3r/SLAPrint.cpp:58 src/libslic3r/SLAPrint.cpp:819
 msgid "Generating support points"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:57
+#: src/libslic3r/SLAPrint.cpp:59
 msgid "Generating support tree"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:58
+#: src/libslic3r/SLAPrint.cpp:60
 msgid "Generating pad"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:59
+#: src/libslic3r/SLAPrint.cpp:61
 msgid "Slicing supports"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:71
+#: src/libslic3r/SLAPrint.cpp:78
 msgid "Merging slices and calculating statistics"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:72
+#: src/libslic3r/SLAPrint.cpp:79
 msgid "Rasterizing layers"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:612
+#: src/libslic3r/SLAPrint.cpp:622
 msgid ""
 "Cannot proceed without support points! Add support points or disable support "
 "generation."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:624
+#: src/libslic3r/SLAPrint.cpp:634
 msgid "Elevation is too low for object."
 msgstr ""
 
 #. TRN To be shown at the status bar on SLA slicing error.
-#: src/libslic3r/SLAPrint.cpp:709
+#: src/libslic3r/SLAPrint.cpp:719
 msgid "Slicing had to be stopped due to an internal error."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:857 src/libslic3r/SLAPrint.cpp:867
-#: src/libslic3r/SLAPrint.cpp:915
+#: src/libslic3r/SLAPrint.cpp:867 src/libslic3r/SLAPrint.cpp:877
+#: src/libslic3r/SLAPrint.cpp:925
 msgid "Visualizing supports"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:1459
+#: src/libslic3r/SLAPrint.cpp:1463
 msgid "Slicing done"
 msgstr ""
 
@@ -4520,109 +4651,109 @@ msgstr ""
 msgid "Failed processing of the output_filename_format template."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:42 src/libslic3r/PrintConfig.cpp:43
+#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
 msgid "Printer technology"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:50
+#: src/libslic3r/PrintConfig.cpp:51
 msgid "Bed shape"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:57
+#: src/libslic3r/PrintConfig.cpp:58
 msgid ""
 "This setting controls the height (and thus the total number) of the slices/"
 "layers. Thinner layers give better accuracy but take more time to print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:64
+#: src/libslic3r/PrintConfig.cpp:65
 msgid "Max print height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:65
+#: src/libslic3r/PrintConfig.cpp:66
 msgid ""
 "Set this to the maximum height that can be reached by your extruder while "
 "printing."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:71
+#: src/libslic3r/PrintConfig.cpp:72
 msgid "Slice gap closing radius"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:73
+#: src/libslic3r/PrintConfig.cpp:74
 msgid ""
 "Cracks smaller than 2x gap closing radius are being filled during the "
 "triangle mesh slicing. The gap closing operation may reduce the final print "
 "resolution, therefore it is advisable to keep the value reasonably low."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:81
+#: src/libslic3r/PrintConfig.cpp:82
 msgid "Hostname, IP or URL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:82
+#: src/libslic3r/PrintConfig.cpp:83
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field should contain "
 "the hostname, IP address or URL of the printer host instance."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:88
+#: src/libslic3r/PrintConfig.cpp:89
 msgid "API Key / Password"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:89
+#: src/libslic3r/PrintConfig.cpp:90
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field should contain "
 "the API Key or the password required for authentication."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:95
+#: src/libslic3r/PrintConfig.cpp:96
 msgid "HTTPS CA File"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:96
+#: src/libslic3r/PrintConfig.cpp:97
 msgid ""
 "Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
 "in crt/pem format. If left blank, the default OS CA certificate repository "
 "is used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:111
+#: src/libslic3r/PrintConfig.cpp:112
 msgid "Avoid crossing perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:112
+#: src/libslic3r/PrintConfig.cpp:113
 msgid ""
 "Optimize travel moves in order to minimize the crossing of perimeters. This "
 "is mostly useful with Bowden extruders which suffer from oozing. This "
 "feature slows down both the print and the G-code generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:119 src/libslic3r/PrintConfig.cpp:1977
+#: src/libslic3r/PrintConfig.cpp:120 src/libslic3r/PrintConfig.cpp:2002
 msgid "Other layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:120
+#: src/libslic3r/PrintConfig.cpp:121
 msgid ""
 "Bed temperature for layers after the first one. Set this to zero to disable "
 "bed temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:122
+#: src/libslic3r/PrintConfig.cpp:123
 msgid "Bed temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:129
+#: src/libslic3r/PrintConfig.cpp:130
 msgid ""
 "This custom code is inserted at every layer change, right before the Z move. "
 "Note that you can use placeholder variables for all Slic3r settings as well "
 "as [layer_num] and [layer_z]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:139
+#: src/libslic3r/PrintConfig.cpp:140
 msgid "Between objects G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:140
+#: src/libslic3r/PrintConfig.cpp:141
 msgid ""
 "This code is inserted between objects when using sequential printing. By "
 "default extruder and bed temperature are reset using non-wait command; "
@@ -4632,69 +4763,69 @@ msgid ""
 "S[first_layer_temperature]\" command wherever you want."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:151
+#: src/libslic3r/PrintConfig.cpp:152
 msgid "Number of solid layers to generate on bottom surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:152
+#: src/libslic3r/PrintConfig.cpp:153
 msgid "Bottom solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:157
+#: src/libslic3r/PrintConfig.cpp:158
 msgid "Bridge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:158
+#: src/libslic3r/PrintConfig.cpp:159
 msgid ""
 "This is the acceleration your printer will use for bridges. Set zero to "
 "disable acceleration control for bridges."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:160 src/libslic3r/PrintConfig.cpp:303
-#: src/libslic3r/PrintConfig.cpp:815 src/libslic3r/PrintConfig.cpp:936
-#: src/libslic3r/PrintConfig.cpp:1089 src/libslic3r/PrintConfig.cpp:1134
-#: src/libslic3r/PrintConfig.cpp:1145 src/libslic3r/PrintConfig.cpp:1334
+#: src/libslic3r/PrintConfig.cpp:161 src/libslic3r/PrintConfig.cpp:304
+#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:937
+#: src/libslic3r/PrintConfig.cpp:1106 src/libslic3r/PrintConfig.cpp:1159
+#: src/libslic3r/PrintConfig.cpp:1170 src/libslic3r/PrintConfig.cpp:1359
 msgid "mm/s²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:166
+#: src/libslic3r/PrintConfig.cpp:167
 msgid "Bridging angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:168
+#: src/libslic3r/PrintConfig.cpp:169
 msgid ""
 "Bridging angle override. If left to zero, the bridging angle will be "
 "calculated automatically. Otherwise the provided angle will be used for all "
 "bridges. Use 180° for zero angle."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:171 src/libslic3r/PrintConfig.cpp:733
-#: src/libslic3r/PrintConfig.cpp:1570 src/libslic3r/PrintConfig.cpp:1580
-#: src/libslic3r/PrintConfig.cpp:1808 src/libslic3r/PrintConfig.cpp:1962
-#: src/libslic3r/PrintConfig.cpp:2146 src/libslic3r/PrintConfig.cpp:2463
+#: src/libslic3r/PrintConfig.cpp:172 src/libslic3r/PrintConfig.cpp:734
+#: src/libslic3r/PrintConfig.cpp:1595 src/libslic3r/PrintConfig.cpp:1605
+#: src/libslic3r/PrintConfig.cpp:1833 src/libslic3r/PrintConfig.cpp:1987
+#: src/libslic3r/PrintConfig.cpp:2171 src/libslic3r/PrintConfig.cpp:2488
 msgid "°"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:177
+#: src/libslic3r/PrintConfig.cpp:178
 msgid "Bridges fan speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:178
+#: src/libslic3r/PrintConfig.cpp:179
 msgid "This fan speed is enforced during all bridges and overhangs."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:179 src/libslic3r/PrintConfig.cpp:745
-#: src/libslic3r/PrintConfig.cpp:1154 src/libslic3r/PrintConfig.cpp:1217
-#: src/libslic3r/PrintConfig.cpp:1462 src/libslic3r/PrintConfig.cpp:2260
-#: src/libslic3r/PrintConfig.cpp:2502
+#: src/libslic3r/PrintConfig.cpp:180 src/libslic3r/PrintConfig.cpp:746
+#: src/libslic3r/PrintConfig.cpp:1179 src/libslic3r/PrintConfig.cpp:1242
+#: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:2285
+#: src/libslic3r/PrintConfig.cpp:2527
 msgid "%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:186
+#: src/libslic3r/PrintConfig.cpp:187
 msgid "Bridge flow ratio"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:188
+#: src/libslic3r/PrintConfig.cpp:189
 msgid ""
 "This factor affects the amount of plastic for bridging. You can decrease it "
 "slightly to pull the extrudates and prevent sagging, although default "
@@ -4702,83 +4833,83 @@ msgid ""
 "before tweaking this."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:198
+#: src/libslic3r/PrintConfig.cpp:199
 msgid "Bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:200
+#: src/libslic3r/PrintConfig.cpp:201
 msgid "Speed for printing bridges."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:201 src/libslic3r/PrintConfig.cpp:577
-#: src/libslic3r/PrintConfig.cpp:585 src/libslic3r/PrintConfig.cpp:594
-#: src/libslic3r/PrintConfig.cpp:602 src/libslic3r/PrintConfig.cpp:629
-#: src/libslic3r/PrintConfig.cpp:648 src/libslic3r/PrintConfig.cpp:874
-#: src/libslic3r/PrintConfig.cpp:1001 src/libslic3r/PrintConfig.cpp:1079
-#: src/libslic3r/PrintConfig.cpp:1099 src/libslic3r/PrintConfig.cpp:1112
-#: src/libslic3r/PrintConfig.cpp:1123 src/libslic3r/PrintConfig.cpp:1176
-#: src/libslic3r/PrintConfig.cpp:1235 src/libslic3r/PrintConfig.cpp:1363
-#: src/libslic3r/PrintConfig.cpp:1537 src/libslic3r/PrintConfig.cpp:1546
-#: src/libslic3r/PrintConfig.cpp:1941 src/libslic3r/PrintConfig.cpp:2053
+#: src/libslic3r/PrintConfig.cpp:202 src/libslic3r/PrintConfig.cpp:578
+#: src/libslic3r/PrintConfig.cpp:586 src/libslic3r/PrintConfig.cpp:595
+#: src/libslic3r/PrintConfig.cpp:603 src/libslic3r/PrintConfig.cpp:630
+#: src/libslic3r/PrintConfig.cpp:649 src/libslic3r/PrintConfig.cpp:875
+#: src/libslic3r/PrintConfig.cpp:1002 src/libslic3r/PrintConfig.cpp:1088
+#: src/libslic3r/PrintConfig.cpp:1124 src/libslic3r/PrintConfig.cpp:1137
+#: src/libslic3r/PrintConfig.cpp:1148 src/libslic3r/PrintConfig.cpp:1201
+#: src/libslic3r/PrintConfig.cpp:1260 src/libslic3r/PrintConfig.cpp:1388
+#: src/libslic3r/PrintConfig.cpp:1562 src/libslic3r/PrintConfig.cpp:1571
+#: src/libslic3r/PrintConfig.cpp:1966 src/libslic3r/PrintConfig.cpp:2078
 msgid "mm/s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:208
+#: src/libslic3r/PrintConfig.cpp:209
 msgid "Brim width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:209
+#: src/libslic3r/PrintConfig.cpp:210
 msgid ""
 "Horizontal width of the brim that will be printed around each object on the "
 "first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:216
+#: src/libslic3r/PrintConfig.cpp:217
 msgid "Clip multi-part objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:217
+#: src/libslic3r/PrintConfig.cpp:218
 msgid ""
 "When printing multi-material objects, this settings will make Slic3r to clip "
 "the overlapping object parts one by the other (2nd part will be clipped by "
 "the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:224
+#: src/libslic3r/PrintConfig.cpp:225
 msgid "Colorprint height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:225
+#: src/libslic3r/PrintConfig.cpp:226
 msgid "Heights at which a filament change is to occur. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:235
+#: src/libslic3r/PrintConfig.cpp:236
 msgid "Compatible printers condition"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:236
+#: src/libslic3r/PrintConfig.cpp:237
 msgid ""
 "A boolean expression using the configuration values of an active printer "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active printer profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:250
+#: src/libslic3r/PrintConfig.cpp:251
 msgid "Compatible print profiles condition"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:251
+#: src/libslic3r/PrintConfig.cpp:252
 msgid ""
 "A boolean expression using the configuration values of an active print "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active print profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:268
+#: src/libslic3r/PrintConfig.cpp:269
 msgid "Complete individual objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:269
+#: src/libslic3r/PrintConfig.cpp:270
 msgid ""
 "When printing multiple objects or copies, this feature will complete each "
 "object before moving onto next one (and starting it from its bottom layer). "
@@ -4786,114 +4917,114 @@ msgid ""
 "warn and prevent you from extruder collisions, but beware."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:277
+#: src/libslic3r/PrintConfig.cpp:278
 msgid "Enable auto cooling"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:278
+#: src/libslic3r/PrintConfig.cpp:279
 msgid ""
 "This flag enables the automatic cooling logic that adjusts print speed and "
 "fan speed according to layer printing time."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:283
+#: src/libslic3r/PrintConfig.cpp:284
 msgid "Cooling tube position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:284
+#: src/libslic3r/PrintConfig.cpp:285
 msgid "Distance of the center-point of the cooling tube from the extruder tip "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:291
+#: src/libslic3r/PrintConfig.cpp:292
 msgid "Cooling tube length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:292
+#: src/libslic3r/PrintConfig.cpp:293
 msgid "Length of the cooling tube to limit space for cooling moves inside it "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:300
+#: src/libslic3r/PrintConfig.cpp:301
 msgid ""
 "This is the acceleration your printer will be reset to after the role-"
 "specific acceleration values are used (perimeter/infill). Set zero to "
 "prevent resetting acceleration at all."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:309
+#: src/libslic3r/PrintConfig.cpp:310
 msgid "Default filament profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:310
+#: src/libslic3r/PrintConfig.cpp:311
 msgid ""
 "Default filament profile associated with the current printer profile. On "
 "selection of the current printer profile, this filament profile will be "
 "activated."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:316
+#: src/libslic3r/PrintConfig.cpp:317
 msgid "Default print profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:317 src/libslic3r/PrintConfig.cpp:2341
-#: src/libslic3r/PrintConfig.cpp:2352
+#: src/libslic3r/PrintConfig.cpp:318 src/libslic3r/PrintConfig.cpp:2366
+#: src/libslic3r/PrintConfig.cpp:2377
 msgid ""
 "Default print profile associated with the current printer profile. On "
 "selection of the current printer profile, this print profile will be "
 "activated."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:323
+#: src/libslic3r/PrintConfig.cpp:324
 msgid "Disable fan for the first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:324
+#: src/libslic3r/PrintConfig.cpp:325
 msgid ""
 "You can set this to a positive value to disable fan at all during the first "
 "layers, so that it does not make adhesion worse."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:326 src/libslic3r/PrintConfig.cpp:946
-#: src/libslic3r/PrintConfig.cpp:1435 src/libslic3r/PrintConfig.cpp:1620
-#: src/libslic3r/PrintConfig.cpp:1681 src/libslic3r/PrintConfig.cpp:1844
-#: src/libslic3r/PrintConfig.cpp:1889
+#: src/libslic3r/PrintConfig.cpp:327 src/libslic3r/PrintConfig.cpp:947
+#: src/libslic3r/PrintConfig.cpp:1460 src/libslic3r/PrintConfig.cpp:1645
+#: src/libslic3r/PrintConfig.cpp:1706 src/libslic3r/PrintConfig.cpp:1869
+#: src/libslic3r/PrintConfig.cpp:1914
 msgid "layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:333
+#: src/libslic3r/PrintConfig.cpp:334
 msgid "Don't support bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:335
+#: src/libslic3r/PrintConfig.cpp:336
 msgid ""
 "Experimental option for preventing support material from being generated "
 "under bridged areas."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:341
+#: src/libslic3r/PrintConfig.cpp:342
 msgid "Distance between copies"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:342
+#: src/libslic3r/PrintConfig.cpp:343
 msgid "Distance used for the auto-arrange feature of the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:349
+#: src/libslic3r/PrintConfig.cpp:350
 msgid "Elephant foot compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:351
+#: src/libslic3r/PrintConfig.cpp:352
 msgid ""
 "The first layer will be shrunk in the XY plane by the configured value to "
 "compensate for the 1st layer squish aka an Elephant Foot effect."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:360
+#: src/libslic3r/PrintConfig.cpp:361
 msgid ""
 "This end procedure is inserted at the end of the output file. Note that you "
 "can use placeholder variables for all Slic3r settings."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:370
+#: src/libslic3r/PrintConfig.cpp:371
 msgid ""
 "This end procedure is inserted at the end of the output file, before the "
 "printer end gcode. Note that you can use placeholder variables for all "
@@ -4901,62 +5032,62 @@ msgid ""
 "extruder order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:380
+#: src/libslic3r/PrintConfig.cpp:381
 msgid "Ensure vertical shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:382
+#: src/libslic3r/PrintConfig.cpp:383
 msgid ""
 "Add solid infill near sloping surfaces to guarantee the vertical shell "
 "thickness (top+bottom solid layers)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:388
+#: src/libslic3r/PrintConfig.cpp:389
 msgid "Top fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:390
+#: src/libslic3r/PrintConfig.cpp:391
 msgid ""
 "Fill pattern for top infill. This only affects the top visible layer, and "
 "not its adjacent solid shells."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:398 src/libslic3r/PrintConfig.cpp:796
-#: src/libslic3r/PrintConfig.cpp:1922
+#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:797
+#: src/libslic3r/PrintConfig.cpp:1947
 msgid "Rectilinear"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:802
+#: src/libslic3r/PrintConfig.cpp:400 src/libslic3r/PrintConfig.cpp:803
 msgid "Concentric"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:400 src/libslic3r/PrintConfig.cpp:806
+#: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:807
 msgid "Hilbert Curve"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:807
+#: src/libslic3r/PrintConfig.cpp:402 src/libslic3r/PrintConfig.cpp:808
 msgid "Archimedean Chords"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:402 src/libslic3r/PrintConfig.cpp:808
+#: src/libslic3r/PrintConfig.cpp:403 src/libslic3r/PrintConfig.cpp:809
 msgid "Octagram Spiral"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:409
+#: src/libslic3r/PrintConfig.cpp:410
 msgid "Bottom fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:410
+#: src/libslic3r/PrintConfig.cpp:411
 msgid ""
 "Fill pattern for bottom infill. This only affects the bottom external "
 "visible layer, and not its adjacent solid shells."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:415 src/libslic3r/PrintConfig.cpp:425
+#: src/libslic3r/PrintConfig.cpp:416 src/libslic3r/PrintConfig.cpp:426
 msgid "External perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:417
+#: src/libslic3r/PrintConfig.cpp:418
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for external "
 "perimeters. If left zero, default extrusion width will be used if set, "
@@ -4964,56 +5095,56 @@ msgid ""
 "(for example 200%), it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:420 src/libslic3r/PrintConfig.cpp:835
-#: src/libslic3r/PrintConfig.cpp:967 src/libslic3r/PrintConfig.cpp:1354
-#: src/libslic3r/PrintConfig.cpp:1692 src/libslic3r/PrintConfig.cpp:1865
-#: src/libslic3r/PrintConfig.cpp:2023
+#: src/libslic3r/PrintConfig.cpp:421 src/libslic3r/PrintConfig.cpp:836
+#: src/libslic3r/PrintConfig.cpp:968 src/libslic3r/PrintConfig.cpp:1379
+#: src/libslic3r/PrintConfig.cpp:1717 src/libslic3r/PrintConfig.cpp:1890
+#: src/libslic3r/PrintConfig.cpp:2048
 msgid "mm or % (leave 0 for default)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:427
+#: src/libslic3r/PrintConfig.cpp:428
 msgid ""
 "This separate setting will affect the speed of external perimeters (the "
 "visible ones). If expressed as percentage (for example: 80%) it will be "
 "calculated on the perimeters speed setting above. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:430 src/libslic3r/PrintConfig.cpp:856
-#: src/libslic3r/PrintConfig.cpp:1651 src/libslic3r/PrintConfig.cpp:1702
-#: src/libslic3r/PrintConfig.cpp:1908 src/libslic3r/PrintConfig.cpp:2035
+#: src/libslic3r/PrintConfig.cpp:431 src/libslic3r/PrintConfig.cpp:857
+#: src/libslic3r/PrintConfig.cpp:1676 src/libslic3r/PrintConfig.cpp:1727
+#: src/libslic3r/PrintConfig.cpp:1933 src/libslic3r/PrintConfig.cpp:2060
 msgid "mm/s or %"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:437
+#: src/libslic3r/PrintConfig.cpp:438
 msgid "External perimeters first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:439
+#: src/libslic3r/PrintConfig.cpp:440
 msgid ""
 "Print contour perimeters from the outermost one to the innermost one instead "
 "of the default inverse order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:445
+#: src/libslic3r/PrintConfig.cpp:446
 msgid "Extra perimeters if needed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:447
-#, no-c-format
+#: src/libslic3r/PrintConfig.cpp:448
+#, possible-c-format
 msgid ""
 "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
 "keeps adding perimeters, until more than 70% of the loop immediately above "
 "is supported."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:457
+#: src/libslic3r/PrintConfig.cpp:458
 msgid ""
 "The extruder to use (unless more specific extruder settings are specified). "
 "This value overrides perimeter and infill extruders, but not the support "
 "extruders."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:469
+#: src/libslic3r/PrintConfig.cpp:470
 msgid ""
 "Set this to the vertical distance between your nozzle tip and (usually) the "
 "X carriage rods. In other words, this is the height of the clearance "
@@ -5021,30 +5152,30 @@ msgid ""
 "extruder can peek before colliding with other printed objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:479
+#: src/libslic3r/PrintConfig.cpp:480
 msgid "Radius"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:480
+#: src/libslic3r/PrintConfig.cpp:481
 msgid ""
 "Set this to the clearance radius around your extruder. If the extruder is "
 "not centered, choose the largest value for safety. This setting is used to "
 "check for collisions and to display the graphical preview in the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:490
+#: src/libslic3r/PrintConfig.cpp:491
 msgid "Extruder Color"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:491 src/libslic3r/PrintConfig.cpp:551
+#: src/libslic3r/PrintConfig.cpp:492 src/libslic3r/PrintConfig.cpp:552
 msgid "This is only used in the Slic3r interface as a visual help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:497
+#: src/libslic3r/PrintConfig.cpp:498
 msgid "Extruder offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:498
+#: src/libslic3r/PrintConfig.cpp:499
 msgid ""
 "If your firmware doesn't handle the extruder displacement you need the G-"
 "code to take it into account. This option lets you specify the displacement "
@@ -5052,21 +5183,21 @@ msgid ""
 "coordinates (they will be subtracted from the XY coordinate)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:507
+#: src/libslic3r/PrintConfig.cpp:508
 msgid "Extrusion axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:508
+#: src/libslic3r/PrintConfig.cpp:509
 msgid ""
 "Use this option to set the axis letter associated to your printer's extruder "
 "(usually E but some printers use A)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:513
+#: src/libslic3r/PrintConfig.cpp:514
 msgid "Extrusion multiplier"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:514
+#: src/libslic3r/PrintConfig.cpp:515
 msgid ""
 "This factor changes the amount of flow proportionally. You may need to tweak "
 "this setting to get nice surface finish and correct single wall widths. "
@@ -5074,11 +5205,11 @@ msgid ""
 "more, check filament diameter and your firmware E steps."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:522
+#: src/libslic3r/PrintConfig.cpp:523
 msgid "Default extrusion width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:524
+#: src/libslic3r/PrintConfig.cpp:525
 msgid ""
 "Set this to a non-zero value to allow a manual extrusion width. If left to "
 "zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
@@ -5087,131 +5218,131 @@ msgid ""
 "height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:528
+#: src/libslic3r/PrintConfig.cpp:529
 msgid "mm or % (leave 0 for auto)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:533
+#: src/libslic3r/PrintConfig.cpp:534
 msgid "Keep fan always on"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:534
+#: src/libslic3r/PrintConfig.cpp:535
 msgid ""
 "If this is enabled, fan will never be disabled and will be kept running at "
 "least at its minimum speed. Useful for PLA, harmful for ABS."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:539
+#: src/libslic3r/PrintConfig.cpp:540
 msgid "Enable fan if layer print time is below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:540
+#: src/libslic3r/PrintConfig.cpp:541
 msgid ""
 "If layer print time is estimated below this number of seconds, fan will be "
 "enabled and its speed will be calculated by interpolating the minimum and "
 "maximum speeds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:542 src/libslic3r/PrintConfig.cpp:1638
+#: src/libslic3r/PrintConfig.cpp:543 src/libslic3r/PrintConfig.cpp:1663
 msgid "approximate seconds"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:550
+#: src/libslic3r/PrintConfig.cpp:551
 msgid "Color"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:556
+#: src/libslic3r/PrintConfig.cpp:557
 msgid "Filament notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:557
+#: src/libslic3r/PrintConfig.cpp:558
 msgid "You can put your notes regarding the filament here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:565 src/libslic3r/PrintConfig.cpp:1182
+#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:1207
 msgid "Max volumetric speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:566
+#: src/libslic3r/PrintConfig.cpp:567
 msgid ""
 "Maximum volumetric speed allowed for this filament. Limits the maximum "
 "volumetric speed of a print to the minimum of print and filament volumetric "
 "speed. Set to zero for no limit."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:569 src/libslic3r/PrintConfig.cpp:1185
+#: src/libslic3r/PrintConfig.cpp:570 src/libslic3r/PrintConfig.cpp:1210
 msgid "mm³/s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:575
+#: src/libslic3r/PrintConfig.cpp:576
 msgid "Loading speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:576
+#: src/libslic3r/PrintConfig.cpp:577
 msgid "Speed used for loading the filament on the wipe tower. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:583
+#: src/libslic3r/PrintConfig.cpp:584
 msgid "Loading speed at the start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:584
+#: src/libslic3r/PrintConfig.cpp:585
 msgid "Speed used at the very beginning of loading phase. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:591
+#: src/libslic3r/PrintConfig.cpp:592
 msgid "Unloading speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:592
+#: src/libslic3r/PrintConfig.cpp:593
 msgid ""
 "Speed used for unloading the filament on the wipe tower (does not affect  "
 "initial part of unloading just after ramming). "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:600
+#: src/libslic3r/PrintConfig.cpp:601
 msgid "Unloading speed at the start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:601
+#: src/libslic3r/PrintConfig.cpp:602
 msgid ""
 "Speed used for unloading the tip of the filament immediately after ramming. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:608
+#: src/libslic3r/PrintConfig.cpp:609
 msgid "Delay after unloading"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:609
+#: src/libslic3r/PrintConfig.cpp:610
 msgid ""
 "Time to wait after the filament is unloaded. May help to get reliable "
 "toolchanges with flexible materials that may need more time to shrink to "
 "original dimensions. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:618
+#: src/libslic3r/PrintConfig.cpp:619
 msgid "Number of cooling moves"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:619
+#: src/libslic3r/PrintConfig.cpp:620
 msgid ""
 "Filament is cooled by being moved back and forth in the cooling tubes. "
 "Specify desired number of these moves "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:627
+#: src/libslic3r/PrintConfig.cpp:628
 msgid "Speed of the first cooling move"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:628
+#: src/libslic3r/PrintConfig.cpp:629
 msgid "Cooling moves are gradually accelerating beginning at this speed. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:635
+#: src/libslic3r/PrintConfig.cpp:636
 msgid "Minimal purge on wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:636
+#: src/libslic3r/PrintConfig.cpp:637
 msgid ""
 "After a tool change, the exact position of the newly loaded filament inside "
 "the nozzle may not be known, and the filament pressure is likely not yet "
@@ -5220,62 +5351,62 @@ msgid ""
 "to produce successive infill or sacrificial object extrusions reliably."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:640
+#: src/libslic3r/PrintConfig.cpp:641
 msgid "mm³"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:646
+#: src/libslic3r/PrintConfig.cpp:647
 msgid "Speed of the last cooling move"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:647
+#: src/libslic3r/PrintConfig.cpp:648
 msgid "Cooling moves are gradually accelerating towards this speed. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:654
+#: src/libslic3r/PrintConfig.cpp:655
 msgid "Filament load time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:655
+#: src/libslic3r/PrintConfig.cpp:656
 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
 "filament during a tool change (when executing the T code). This time is "
 "added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:662
+#: src/libslic3r/PrintConfig.cpp:663
 msgid "Ramming parameters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:663
+#: src/libslic3r/PrintConfig.cpp:664
 msgid ""
 "This string is edited by RammingDialog and contains ramming specific "
 "parameters "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:669
+#: src/libslic3r/PrintConfig.cpp:670
 msgid "Filament unload time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:670
+#: src/libslic3r/PrintConfig.cpp:671
 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
 "filament during a tool change (when executing the T code). This time is "
 "added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:678
+#: src/libslic3r/PrintConfig.cpp:679
 msgid ""
 "Enter your filament diameter here. Good precision is required, so use a "
 "caliper and do multiple measurements along the filament, then compute the "
 "average."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:685
+#: src/libslic3r/PrintConfig.cpp:686
 msgid "Density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:686
+#: src/libslic3r/PrintConfig.cpp:687
 msgid ""
 "Enter your filament density here. This is only for statistical information. "
 "A decent way is to weigh a known length of filament and compute the ratio of "
@@ -5283,113 +5414,113 @@ msgid ""
 "displacement."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:689
+#: src/libslic3r/PrintConfig.cpp:690
 msgid "g/cm³"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:694
+#: src/libslic3r/PrintConfig.cpp:695
 msgid "Filament type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:695
+#: src/libslic3r/PrintConfig.cpp:696
 msgid "The filament material type for use in custom G-codes."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:711
+#: src/libslic3r/PrintConfig.cpp:712
 msgid "Soluble material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:712
+#: src/libslic3r/PrintConfig.cpp:713
 msgid "Soluble material is most likely used for a soluble support."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:718
+#: src/libslic3r/PrintConfig.cpp:719
 msgid ""
 "Enter your filament cost per kg here. This is only for statistical "
 "information."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:719
+#: src/libslic3r/PrintConfig.cpp:720
 msgid "money/kg"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:728
+#: src/libslic3r/PrintConfig.cpp:729
 msgid "Fill angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:730
+#: src/libslic3r/PrintConfig.cpp:731
 msgid ""
 "Default base angle for infill orientation. Cross-hatching will be applied to "
 "this. Bridges will be infilled using the best direction Slic3r can detect, "
 "so this setting does not affect them."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:742
+#: src/libslic3r/PrintConfig.cpp:743
 msgid "Fill density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:744
+#: src/libslic3r/PrintConfig.cpp:745
 msgid "Density of internal infill, expressed in the range 0% - 100%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:779
+#: src/libslic3r/PrintConfig.cpp:780
 msgid "Fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:781
+#: src/libslic3r/PrintConfig.cpp:782
 msgid "Fill pattern for general low-density infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:797
+#: src/libslic3r/PrintConfig.cpp:798
 msgid "Grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:798
+#: src/libslic3r/PrintConfig.cpp:799
 msgid "Triangles"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:799
+#: src/libslic3r/PrintConfig.cpp:800
 msgid "Stars"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:800
+#: src/libslic3r/PrintConfig.cpp:801
 msgid "Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:801
+#: src/libslic3r/PrintConfig.cpp:802
 msgid "Line"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:803 src/libslic3r/PrintConfig.cpp:1924
+#: src/libslic3r/PrintConfig.cpp:804 src/libslic3r/PrintConfig.cpp:1949
 msgid "Honeycomb"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:804
+#: src/libslic3r/PrintConfig.cpp:805
 msgid "3D Honeycomb"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:805
+#: src/libslic3r/PrintConfig.cpp:806
 msgid "Gyroid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:812 src/libslic3r/PrintConfig.cpp:821
-#: src/libslic3r/PrintConfig.cpp:829 src/libslic3r/PrintConfig.cpp:862
+#: src/libslic3r/PrintConfig.cpp:813 src/libslic3r/PrintConfig.cpp:822
+#: src/libslic3r/PrintConfig.cpp:830 src/libslic3r/PrintConfig.cpp:863
 msgid "First layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:813
+#: src/libslic3r/PrintConfig.cpp:814
 msgid ""
 "This is the acceleration your printer will use for first layer. Set zero to "
 "disable acceleration control for first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:822
+#: src/libslic3r/PrintConfig.cpp:823
 msgid ""
 "Heated build plate temperature for the first layer. Set this to zero to "
 "disable bed temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:831
+#: src/libslic3r/PrintConfig.cpp:832
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for first "
 "layer. You can use this to force fatter extrudates for better adhesion. If "
@@ -5397,11 +5528,11 @@ msgid ""
 "layer height. If set to zero, it will use the default extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:841
+#: src/libslic3r/PrintConfig.cpp:842
 msgid "First layer height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:843
+#: src/libslic3r/PrintConfig.cpp:844
 msgid ""
 "When printing with very low layer heights, you might still want to print a "
 "thicker bottom layer to improve adhesion and tolerance for non perfect build "
@@ -5409,52 +5540,52 @@ msgid ""
 "example: 150%) over the default layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:847 src/libslic3r/PrintConfig.cpp:992
-#: src/libslic3r/PrintConfig.cpp:1797
+#: src/libslic3r/PrintConfig.cpp:848 src/libslic3r/PrintConfig.cpp:993
+#: src/libslic3r/PrintConfig.cpp:1822
 msgid "mm or %"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:852
+#: src/libslic3r/PrintConfig.cpp:853
 msgid "First layer speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:853
+#: src/libslic3r/PrintConfig.cpp:854
 msgid ""
 "If expressed as absolute value in mm/s, this speed will be applied to all "
 "the print moves of the first layer, regardless of their type. If expressed "
 "as a percentage (for example: 40%) it will scale the default speeds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:863
+#: src/libslic3r/PrintConfig.cpp:864
 msgid ""
 "Extruder temperature for first layer. If you want to control temperature "
 "manually during print, set this to zero to disable temperature control "
 "commands in the output file."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:872
+#: src/libslic3r/PrintConfig.cpp:873
 msgid ""
 "Speed for filling small gaps using short zigzag moves. Keep this reasonably "
 "low to avoid too much shaking and resonance issues. Set zero to disable gaps "
 "filling."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:880
+#: src/libslic3r/PrintConfig.cpp:881
 msgid "Verbose G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:881
+#: src/libslic3r/PrintConfig.cpp:882
 msgid ""
 "Enable this to get a commented G-code file, with each line explained by a "
 "descriptive text. If you print from SD card, the additional weight of the "
 "file could make your firmware slow down."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:888
+#: src/libslic3r/PrintConfig.cpp:889
 msgid "G-code flavor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:889
+#: src/libslic3r/PrintConfig.cpp:890
 msgid ""
 "Some G/M-code commands, including temperature control and others, are not "
 "universal. Set this option to your printer's firmware to get a compatible "
@@ -5462,15 +5593,15 @@ msgid ""
 "extrusion value at all."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:912
+#: src/libslic3r/PrintConfig.cpp:913
 msgid "No extrusion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:917
+#: src/libslic3r/PrintConfig.cpp:918
 msgid "Label objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:918
+#: src/libslic3r/PrintConfig.cpp:919
 msgid ""
 "Enable this to add comments into the G-Code labeling print moves with what "
 "object they belong to, which is useful for the Octoprint CancelObject "
@@ -5478,46 +5609,46 @@ msgid ""
 "setup and Wipe into Object / Wipe into Infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:925
+#: src/libslic3r/PrintConfig.cpp:926
 msgid "High extruder current on filament swap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:926
+#: src/libslic3r/PrintConfig.cpp:927
 msgid ""
 "It may be beneficial to increase the extruder motor current during the "
 "filament exchange sequence to allow for rapid ramming feed rates and to "
 "overcome resistance when loading a filament with an ugly shaped tip."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:934
+#: src/libslic3r/PrintConfig.cpp:935
 msgid ""
 "This is the acceleration your printer will use for infill. Set zero to "
 "disable acceleration control for infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:942
+#: src/libslic3r/PrintConfig.cpp:943
 msgid "Combine infill every"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:944
+#: src/libslic3r/PrintConfig.cpp:945
 msgid ""
 "This feature allows to combine infill and speed up your print by extruding "
 "thicker infill layers while preserving thin perimeters, thus accuracy."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:947
+#: src/libslic3r/PrintConfig.cpp:948
 msgid "Combine infill every n layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:953
+#: src/libslic3r/PrintConfig.cpp:954
 msgid "Infill extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:955
+#: src/libslic3r/PrintConfig.cpp:956
 msgid "The extruder to use when printing infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:963
+#: src/libslic3r/PrintConfig.cpp:964
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill. If "
 "left zero, default extrusion width will be used if set, otherwise 1.125 x "
@@ -5526,32 +5657,32 @@ msgid ""
 "example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:972
+#: src/libslic3r/PrintConfig.cpp:973
 msgid "Infill before perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:973
+#: src/libslic3r/PrintConfig.cpp:974
 msgid ""
 "This option will switch the print order of perimeters and infill, making the "
 "latter first."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:978
+#: src/libslic3r/PrintConfig.cpp:979
 msgid "Only infill where needed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:980
+#: src/libslic3r/PrintConfig.cpp:981
 msgid ""
 "This option will limit infill to the areas actually needed for supporting "
 "ceilings (it will act as internal support material). If enabled, slows down "
 "the G-code generation due to the multiple checks involved."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:987
+#: src/libslic3r/PrintConfig.cpp:988
 msgid "Infill/perimeters overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:989
+#: src/libslic3r/PrintConfig.cpp:990
 msgid ""
 "This setting applies an additional overlap between infill and perimeters for "
 "better bonding. Theoretically this shouldn't be needed, but backlash might "
@@ -5559,30 +5690,30 @@ msgid ""
 "perimeter extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1000
+#: src/libslic3r/PrintConfig.cpp:1001
 msgid "Speed for printing the internal fill. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1008
+#: src/libslic3r/PrintConfig.cpp:1009
 msgid "Inherits profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1009
+#: src/libslic3r/PrintConfig.cpp:1010
 msgid "Name of the profile, from which this profile inherits."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1022
+#: src/libslic3r/PrintConfig.cpp:1023
 msgid "Interface shells"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1023
+#: src/libslic3r/PrintConfig.cpp:1024
 msgid ""
 "Force the generation of solid shells between adjacent materials/volumes. "
 "Useful for multi-extruder prints with translucent materials or manual "
 "soluble support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1032
+#: src/libslic3r/PrintConfig.cpp:1033
 msgid ""
 "This custom code is inserted at every layer change, right after the Z move "
 "and before the extruder moves to the first layer point. Note that you can "
@@ -5590,11 +5721,11 @@ msgid ""
 "[layer_z]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1043
+#: src/libslic3r/PrintConfig.cpp:1044
 msgid "Supports remaining times"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1044
+#: src/libslic3r/PrintConfig.cpp:1045
 msgid ""
 "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
 "intervals into the G-code to let the firmware show accurate remaining time. "
@@ -5602,64 +5733,152 @@ msgid ""
 "firmware supports M73 Qxx Sxx for the silent mode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1052
-msgid "Supports silent mode"
-msgstr ""
-
 #: src/libslic3r/PrintConfig.cpp:1053
-msgid "Set silent mode for the G-code flavor"
+msgid "Supports stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1076
-msgid "Maximum feedrate %1%"
+#: src/libslic3r/PrintConfig.cpp:1054
+msgid "The firmware supports stealth mode"
 msgstr ""
 
 #: src/libslic3r/PrintConfig.cpp:1078
-msgid "Maximum feedrate of the %1% axis"
+msgid "Maximum feedrate X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1079
+msgid "Maximum feedrate Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1080
+msgid "Maximum feedrate Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1081
+msgid "Maximum feedrate E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1084
+msgid "Maximum feedrate of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1085
+msgid "Maximum feedrate of the Y axis"
 msgstr ""
 
 #: src/libslic3r/PrintConfig.cpp:1086
-msgid "Maximum acceleration %1%"
+msgid "Maximum feedrate of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1088
-msgid "Maximum acceleration of the %1% axis"
+#: src/libslic3r/PrintConfig.cpp:1087
+msgid "Maximum feedrate of the E axis"
 msgstr ""
 
 #: src/libslic3r/PrintConfig.cpp:1096
-msgid "Maximum jerk %1%"
+msgid "Maximum acceleration X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1097
+msgid "Maximum acceleration Y"
 msgstr ""
 
 #: src/libslic3r/PrintConfig.cpp:1098
-msgid "Maximum jerk of the %1% axis"
+msgid "Maximum acceleration Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1099
+msgid "Maximum acceleration E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1102
+msgid "Maximum acceleration of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1109 src/libslic3r/PrintConfig.cpp:1111
+#: src/libslic3r/PrintConfig.cpp:1103
+msgid "Maximum acceleration of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1104
+msgid "Maximum acceleration of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1105
+msgid "Maximum acceleration of the E axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1114
+msgid "Maximum jerk X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1115
+msgid "Maximum jerk Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1116
+msgid "Maximum jerk Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1117
+msgid "Maximum jerk E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1120
+msgid "Maximum jerk of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1121
+msgid "Maximum jerk of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1122
+msgid "Maximum jerk of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1123
+msgid "Maximum jerk of the E axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1134
 msgid "Minimum feedrate when extruding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1120 src/libslic3r/PrintConfig.cpp:1122
+#: src/libslic3r/PrintConfig.cpp:1136
+msgid "Minimum feedrate when extruding (M205 S)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1145
 msgid "Minimum travel feedrate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1131 src/libslic3r/PrintConfig.cpp:1133
+#: src/libslic3r/PrintConfig.cpp:1147
+msgid "Minimum travel feedrate (M205 T)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1156
 msgid "Maximum acceleration when extruding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1142 src/libslic3r/PrintConfig.cpp:1144
+#: src/libslic3r/PrintConfig.cpp:1158
+msgid "Maximum acceleration when extruding (M204 S)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1167
 msgid "Maximum acceleration when retracting"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1152 src/libslic3r/PrintConfig.cpp:1161
+#: src/libslic3r/PrintConfig.cpp:1169
+msgid "Maximum acceleration when retracting (M204 T)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1177 src/libslic3r/PrintConfig.cpp:1186
 msgid "Max"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1153
+#: src/libslic3r/PrintConfig.cpp:1178
 msgid "This setting represents the maximum speed of your fan."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1162
-#, no-c-format
+#: src/libslic3r/PrintConfig.cpp:1187
+#, possible-c-format
 msgid ""
 "This is the highest printable layer height for this extruder, used to cap "
 "the variable layer height and support layer height. Maximum recommended "
@@ -5667,28 +5886,28 @@ msgid ""
 "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1172
+#: src/libslic3r/PrintConfig.cpp:1197
 msgid "Max print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1173
+#: src/libslic3r/PrintConfig.cpp:1198
 msgid ""
 "When setting other speed settings to 0 Slic3r will autocalculate the optimal "
 "speed in order to keep constant extruder pressure. This experimental setting "
 "is used to set the highest print speed you want to allow."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1183
+#: src/libslic3r/PrintConfig.cpp:1208
 msgid ""
 "This experimental setting is used to set the maximum volumetric speed your "
 "extruder supports."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1192
+#: src/libslic3r/PrintConfig.cpp:1217
 msgid "Max volumetric slope positive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1193 src/libslic3r/PrintConfig.cpp:1204
+#: src/libslic3r/PrintConfig.cpp:1218 src/libslic3r/PrintConfig.cpp:1229
 msgid ""
 "This experimental setting is used to limit the speed of change in extrusion "
 "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
@@ -5696,99 +5915,99 @@ msgid ""
 "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1197 src/libslic3r/PrintConfig.cpp:1208
+#: src/libslic3r/PrintConfig.cpp:1222 src/libslic3r/PrintConfig.cpp:1233
 msgid "mm³/s²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1203
+#: src/libslic3r/PrintConfig.cpp:1228
 msgid "Max volumetric slope negative"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1215 src/libslic3r/PrintConfig.cpp:1224
+#: src/libslic3r/PrintConfig.cpp:1240 src/libslic3r/PrintConfig.cpp:1249
 msgid "Min"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1216
+#: src/libslic3r/PrintConfig.cpp:1241
 msgid "This setting represents the minimum PWM your fan needs to work."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1225
+#: src/libslic3r/PrintConfig.cpp:1250
 msgid ""
 "This is the lowest printable layer height for this extruder and limits the "
 "resolution for variable layer height. Typical values are between 0.05 mm and "
 "0.1 mm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1233
+#: src/libslic3r/PrintConfig.cpp:1258
 msgid "Min print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1234
+#: src/libslic3r/PrintConfig.cpp:1259
 msgid "Slic3r will not scale speed down below this speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1241
+#: src/libslic3r/PrintConfig.cpp:1266
 msgid "Minimal filament extrusion length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1242
+#: src/libslic3r/PrintConfig.cpp:1267
 msgid ""
 "Generate no less than the number of skirt loops required to consume the "
 "specified amount of filament on the bottom layer. For multi-extruder "
 "machines, this minimum applies to each extruder."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1251
+#: src/libslic3r/PrintConfig.cpp:1276
 msgid "Configuration notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1252
+#: src/libslic3r/PrintConfig.cpp:1277
 msgid ""
 "You can put here your personal notes. This text will be added to the G-code "
 "header comments."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1261
+#: src/libslic3r/PrintConfig.cpp:1286
 msgid "Nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1262
+#: src/libslic3r/PrintConfig.cpp:1287
 msgid ""
 "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1267
+#: src/libslic3r/PrintConfig.cpp:1292
 msgid "Host Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1268
+#: src/libslic3r/PrintConfig.cpp:1293
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field must contain "
 "the kind of the host."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1279
+#: src/libslic3r/PrintConfig.cpp:1304
 msgid "Only retract when crossing perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1280
+#: src/libslic3r/PrintConfig.cpp:1305
 msgid ""
 "Disables retraction when the travel path does not exceed the upper layer's "
 "perimeters (and thus any ooze will be probably invisible)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1287
+#: src/libslic3r/PrintConfig.cpp:1312
 msgid ""
 "This option will drop the temperature of the inactive extruders to prevent "
 "oozing. It will enable a tall skirt automatically and move extruders outside "
 "such skirt when changing temperatures."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1294
+#: src/libslic3r/PrintConfig.cpp:1319
 msgid "Output filename format"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1295
+#: src/libslic3r/PrintConfig.cpp:1320
 msgid ""
 "You can use all configuration options as variables inside this template. For "
 "example: [layer_height], [fill_density] etc. You can also use [timestamp], "
@@ -5796,31 +6015,31 @@ msgid ""
 "[input_filename], [input_filename_base]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1304
+#: src/libslic3r/PrintConfig.cpp:1329
 msgid "Detect bridging perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1306
+#: src/libslic3r/PrintConfig.cpp:1331
 msgid ""
 "Experimental option to adjust flow for overhangs (bridge flow will be used), "
 "to apply bridge speed to them and enable fan."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1312
+#: src/libslic3r/PrintConfig.cpp:1337
 msgid "Filament parking position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1313
+#: src/libslic3r/PrintConfig.cpp:1338
 msgid ""
 "Distance of the extruder tip from the position where the filament is parked "
 "when unloaded. This should match the value in printer firmware. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1321
+#: src/libslic3r/PrintConfig.cpp:1346
 msgid "Extra loading distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1322
+#: src/libslic3r/PrintConfig.cpp:1347
 msgid ""
 "When set to zero, the distance the filament is moved from parking position "
 "during load is exactly the same as it was moved back during unload. When "
@@ -5828,28 +6047,28 @@ msgid ""
 "than unloading. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1330 src/libslic3r/PrintConfig.cpp:1348
-#: src/libslic3r/PrintConfig.cpp:1360 src/libslic3r/PrintConfig.cpp:1370
+#: src/libslic3r/PrintConfig.cpp:1355 src/libslic3r/PrintConfig.cpp:1373
+#: src/libslic3r/PrintConfig.cpp:1385 src/libslic3r/PrintConfig.cpp:1395
 msgid "Perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1331
+#: src/libslic3r/PrintConfig.cpp:1356
 msgid ""
 "This is the acceleration your printer will use for perimeters. A high value "
 "like 9000 usually gives good results if your hardware is up to the job. Set "
 "zero to disable acceleration control for perimeters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1339
+#: src/libslic3r/PrintConfig.cpp:1364
 msgid "Perimeter extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1341
+#: src/libslic3r/PrintConfig.cpp:1366
 msgid ""
 "The extruder to use when printing perimeters and brim. First extruder is 1."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1350
+#: src/libslic3r/PrintConfig.cpp:1375
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for perimeters. "
 "You may want to use thinner extrudates to get more accurate surfaces. If "
@@ -5858,12 +6077,12 @@ msgid ""
 "it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1362
+#: src/libslic3r/PrintConfig.cpp:1387
 msgid ""
 "Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1372
+#: src/libslic3r/PrintConfig.cpp:1397
 msgid ""
 "This option sets the number of perimeters to generate for each layer. Note "
 "that Slic3r may increase this number automatically when it detects sloping "
@@ -5871,11 +6090,11 @@ msgid ""
 "Perimeters option is enabled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1376
+#: src/libslic3r/PrintConfig.cpp:1401
 msgid "(minimum)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1384
+#: src/libslic3r/PrintConfig.cpp:1409
 msgid ""
 "If you want to process the output G-code through custom scripts, just list "
 "their absolute paths here. Separate multiple scripts with a semicolon. "
@@ -5884,55 +6103,55 @@ msgid ""
 "environment variables."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1396
+#: src/libslic3r/PrintConfig.cpp:1421
 msgid "Printer type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1397
+#: src/libslic3r/PrintConfig.cpp:1422
 msgid "Type of the printer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1402
+#: src/libslic3r/PrintConfig.cpp:1427
 msgid "Printer notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1403
+#: src/libslic3r/PrintConfig.cpp:1428
 msgid "You can put your notes regarding the printer here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1411
+#: src/libslic3r/PrintConfig.cpp:1436
 msgid "Printer vendor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1412
+#: src/libslic3r/PrintConfig.cpp:1437
 msgid "Name of the printer vendor."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1417
+#: src/libslic3r/PrintConfig.cpp:1442
 msgid "Printer variant"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1418
+#: src/libslic3r/PrintConfig.cpp:1443
 msgid ""
 "Name of the printer variant. For example, the printer variants may be "
 "differentiated by a nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1431
+#: src/libslic3r/PrintConfig.cpp:1456
 msgid "Raft layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1433
+#: src/libslic3r/PrintConfig.cpp:1458
 msgid ""
 "The object will be raised by this number of layers, and support material "
 "will be generated under it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1441
+#: src/libslic3r/PrintConfig.cpp:1466
 msgid "Resolution"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1442
+#: src/libslic3r/PrintConfig.cpp:1467
 msgid ""
 "Minimum detail resolution, used to simplify the input file for speeding up "
 "the slicing job and reducing memory usage. High-resolution models often "
@@ -5940,278 +6159,278 @@ msgid ""
 "simplification and use full resolution from input."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1452
+#: src/libslic3r/PrintConfig.cpp:1477
 msgid "Minimum travel after retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1453
+#: src/libslic3r/PrintConfig.cpp:1478
 msgid ""
 "Retraction is not triggered when travel moves are shorter than this length."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1459
+#: src/libslic3r/PrintConfig.cpp:1484
 msgid "Retract amount before wipe"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1460
+#: src/libslic3r/PrintConfig.cpp:1485
 msgid ""
 "With bowden extruders, it may be wise to do some amount of quick retract "
 "before doing the wipe movement."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1467
+#: src/libslic3r/PrintConfig.cpp:1492
 msgid "Retract on layer change"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1468
+#: src/libslic3r/PrintConfig.cpp:1493
 msgid "This flag enforces a retraction whenever a Z move is done."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1473 src/libslic3r/PrintConfig.cpp:1481
+#: src/libslic3r/PrintConfig.cpp:1498 src/libslic3r/PrintConfig.cpp:1506
 msgid "Length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1474
+#: src/libslic3r/PrintConfig.cpp:1499
 msgid "Retraction Length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1475
+#: src/libslic3r/PrintConfig.cpp:1500
 msgid ""
 "When retraction is triggered, filament is pulled back by the specified "
 "amount (the length is measured on raw filament, before it enters the "
 "extruder)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1477 src/libslic3r/PrintConfig.cpp:1486
+#: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1511
 msgid "mm (zero to disable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1482
+#: src/libslic3r/PrintConfig.cpp:1507
 msgid "Retraction Length (Toolchange)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1483
+#: src/libslic3r/PrintConfig.cpp:1508
 msgid ""
 "When retraction is triggered before changing tool, filament is pulled back "
 "by the specified amount (the length is measured on raw filament, before it "
 "enters the extruder)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1491
+#: src/libslic3r/PrintConfig.cpp:1516
 msgid "Lift Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1492
+#: src/libslic3r/PrintConfig.cpp:1517
 msgid ""
 "If you set this to a positive value, Z is quickly raised every time a "
 "retraction is triggered. When using multiple extruders, only the setting for "
 "the first extruder will be considered."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1499
+#: src/libslic3r/PrintConfig.cpp:1524
 msgid "Above Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1500
+#: src/libslic3r/PrintConfig.cpp:1525
 msgid "Only lift Z above"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1501
+#: src/libslic3r/PrintConfig.cpp:1526
 msgid ""
 "If you set this to a positive value, Z lift will only take place above the "
 "specified absolute Z. You can tune this setting for skipping lift on the "
 "first layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1508
+#: src/libslic3r/PrintConfig.cpp:1533
 msgid "Below Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1509
+#: src/libslic3r/PrintConfig.cpp:1534
 msgid "Only lift Z below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1510
+#: src/libslic3r/PrintConfig.cpp:1535
 msgid ""
 "If you set this to a positive value, Z lift will only take place below the "
 "specified absolute Z. You can tune this setting for limiting lift to the "
 "first layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1518 src/libslic3r/PrintConfig.cpp:1526
+#: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1551
 msgid "Extra length on restart"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1519
+#: src/libslic3r/PrintConfig.cpp:1544
 msgid ""
 "When the retraction is compensated after the travel move, the extruder will "
 "push this additional amount of filament. This setting is rarely needed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1527
+#: src/libslic3r/PrintConfig.cpp:1552
 msgid ""
 "When the retraction is compensated after changing tool, the extruder will "
 "push this additional amount of filament."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1534 src/libslic3r/PrintConfig.cpp:1535
+#: src/libslic3r/PrintConfig.cpp:1559 src/libslic3r/PrintConfig.cpp:1560
 msgid "Retraction Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1536
+#: src/libslic3r/PrintConfig.cpp:1561
 msgid "The speed for retractions (it only applies to the extruder motor)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1542 src/libslic3r/PrintConfig.cpp:1543
+#: src/libslic3r/PrintConfig.cpp:1567 src/libslic3r/PrintConfig.cpp:1568
 msgid "Deretraction Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1544
+#: src/libslic3r/PrintConfig.cpp:1569
 msgid ""
 "The speed for loading of a filament into extruder after retraction (it only "
 "applies to the extruder motor). If left to zero, the retraction speed is "
 "used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1551
+#: src/libslic3r/PrintConfig.cpp:1576
 msgid "Seam position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1553
+#: src/libslic3r/PrintConfig.cpp:1578
 msgid "Position of perimeters starting points."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1559
+#: src/libslic3r/PrintConfig.cpp:1584
 msgid "Random"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1560
+#: src/libslic3r/PrintConfig.cpp:1585
 msgid "Nearest"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1561
+#: src/libslic3r/PrintConfig.cpp:1586
 msgid "Aligned"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1569
+#: src/libslic3r/PrintConfig.cpp:1594
 msgid "Direction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1571
+#: src/libslic3r/PrintConfig.cpp:1596
 msgid "Preferred direction of the seam"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1572
+#: src/libslic3r/PrintConfig.cpp:1597
 msgid "Seam preferred direction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1579
+#: src/libslic3r/PrintConfig.cpp:1604
 msgid "Jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1581
+#: src/libslic3r/PrintConfig.cpp:1606
 msgid "Seam preferred direction jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1582
+#: src/libslic3r/PrintConfig.cpp:1607
 msgid "Preferred direction of the seam - jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1592
+#: src/libslic3r/PrintConfig.cpp:1617
 msgid "USB/serial port for printer connection."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1599
+#: src/libslic3r/PrintConfig.cpp:1624
 msgid "Serial port speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1600
+#: src/libslic3r/PrintConfig.cpp:1625
 msgid "Speed (baud) of USB/serial port for printer connection."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1609
+#: src/libslic3r/PrintConfig.cpp:1634
 msgid "Distance from object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1610
+#: src/libslic3r/PrintConfig.cpp:1635
 msgid ""
 "Distance between skirt and object(s). Set this to zero to attach the skirt "
 "to the object(s) and get a brim for better adhesion."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1617
+#: src/libslic3r/PrintConfig.cpp:1642
 msgid "Skirt height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1618
+#: src/libslic3r/PrintConfig.cpp:1643
 msgid ""
 "Height of skirt expressed in layers. Set this to a tall value to use skirt "
 "as a shield against drafts."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1625
+#: src/libslic3r/PrintConfig.cpp:1650
 msgid "Loops (minimum)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1626
+#: src/libslic3r/PrintConfig.cpp:1651
 msgid "Skirt Loops"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1627
+#: src/libslic3r/PrintConfig.cpp:1652
 msgid ""
 "Number of loops for the skirt. If the Minimum Extrusion Length option is "
 "set, the number of loops might be greater than the one configured here. Set "
 "this to zero to disable skirt completely."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1635
+#: src/libslic3r/PrintConfig.cpp:1660
 msgid "Slow down if layer print time is below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1636
+#: src/libslic3r/PrintConfig.cpp:1661
 msgid ""
 "If layer print time is estimated below this number of seconds, print moves "
 "speed will be scaled down to extend duration to this value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1646
+#: src/libslic3r/PrintConfig.cpp:1671
 msgid "Small perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1648
+#: src/libslic3r/PrintConfig.cpp:1673
 msgid ""
 "This separate setting will affect the speed of perimeters having radius <= "
 "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
 "be calculated on the perimeters speed setting above. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1658
+#: src/libslic3r/PrintConfig.cpp:1683
 msgid "Solid infill threshold area"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1660
+#: src/libslic3r/PrintConfig.cpp:1685
 msgid ""
 "Force solid infill for regions having a smaller area than the specified "
 "threshold."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1661
+#: src/libslic3r/PrintConfig.cpp:1686
 msgid "mm²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1667
+#: src/libslic3r/PrintConfig.cpp:1692
 msgid "Solid infill extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1669
+#: src/libslic3r/PrintConfig.cpp:1694
 msgid "The extruder to use when printing solid infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1675
+#: src/libslic3r/PrintConfig.cpp:1700
 msgid "Solid infill every"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1677
+#: src/libslic3r/PrintConfig.cpp:1702
 msgid ""
 "This feature allows to force a solid layer every given number of layers. "
 "Zero to disable. You can set this to any value (for example 9999); Slic3r "
@@ -6219,7 +6438,7 @@ msgid ""
 "according to nozzle diameter and layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1689
+#: src/libslic3r/PrintConfig.cpp:1714
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "solid surfaces. If left zero, default extrusion width will be used if set, "
@@ -6227,22 +6446,22 @@ msgid ""
 "(for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1699
+#: src/libslic3r/PrintConfig.cpp:1724
 msgid ""
 "Speed for printing solid regions (top/bottom/internal horizontal shells). "
 "This can be expressed as a percentage (for example: 80%) over the default "
 "infill speed above. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1711
+#: src/libslic3r/PrintConfig.cpp:1736
 msgid "Number of solid layers to generate on top and bottom surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1717
+#: src/libslic3r/PrintConfig.cpp:1742
 msgid "Spiral vase"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1718
+#: src/libslic3r/PrintConfig.cpp:1743
 msgid ""
 "This feature will raise Z gradually while printing a single-walled object in "
 "order to remove any visible seam. This option requires a single perimeter, "
@@ -6251,18 +6470,18 @@ msgid ""
 "when printing more than an object."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1726
+#: src/libslic3r/PrintConfig.cpp:1751
 msgid "Temperature variation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1727
+#: src/libslic3r/PrintConfig.cpp:1752
 msgid ""
 "Temperature difference to be applied when an extruder is not active. Enables "
 "a full-height \"sacrificial\" skirt on which the nozzles are periodically "
 "wiped."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1737
+#: src/libslic3r/PrintConfig.cpp:1762
 msgid ""
 "This start procedure is inserted at the beginning, after bed has reached the "
 "target temperature and extruder just started heating, and before extruder "
@@ -6273,7 +6492,7 @@ msgid ""
 "\"M109 S[first_layer_temperature]\" command wherever you want."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1752
+#: src/libslic3r/PrintConfig.cpp:1777
 msgid ""
 "This start procedure is inserted at the beginning, after any printer start "
 "gcode. This is used to override settings for a specific filament. If Slic3r "
@@ -6285,93 +6504,93 @@ msgid ""
 "extruders, the gcode is processed in extruder order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1767
+#: src/libslic3r/PrintConfig.cpp:1792
 msgid "Single Extruder Multi Material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1768
+#: src/libslic3r/PrintConfig.cpp:1793
 msgid "The printer multiplexes filaments into a single hot end."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1773
+#: src/libslic3r/PrintConfig.cpp:1798
 msgid "Prime all printing extruders"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1774
+#: src/libslic3r/PrintConfig.cpp:1799
 msgid ""
 "If enabled, all printing extruders will be primed at the front edge of the "
 "print bed at the start of the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1779
+#: src/libslic3r/PrintConfig.cpp:1804
 msgid "Generate support material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1781
+#: src/libslic3r/PrintConfig.cpp:1806
 msgid "Enable support material generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1785
+#: src/libslic3r/PrintConfig.cpp:1810
 msgid "Auto generated supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1787
+#: src/libslic3r/PrintConfig.cpp:1812
 msgid ""
 "If checked, supports will be generated automatically based on the overhang "
 "threshold value. If unchecked, supports will be generated inside the "
 "\"Support Enforcer\" volumes only."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1793
+#: src/libslic3r/PrintConfig.cpp:1818
 msgid "XY separation between an object and its support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1795
+#: src/libslic3r/PrintConfig.cpp:1820
 msgid ""
 "XY separation between an object and its support. If expressed as percentage "
 "(for example 50%), it will be calculated over external perimeter width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1805
+#: src/libslic3r/PrintConfig.cpp:1830
 msgid "Pattern angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1807
+#: src/libslic3r/PrintConfig.cpp:1832
 msgid ""
 "Use this setting to rotate the support material pattern on the horizontal "
 "plane."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1817 src/libslic3r/PrintConfig.cpp:2425
+#: src/libslic3r/PrintConfig.cpp:1842 src/libslic3r/PrintConfig.cpp:2450
 msgid ""
 "Only create support if it lies on a build plate. Don't create support on a "
 "print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1823
+#: src/libslic3r/PrintConfig.cpp:1848
 msgid "Contact Z distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1825
+#: src/libslic3r/PrintConfig.cpp:1850
 msgid ""
 "The vertical distance between object and support material interface. Setting "
 "this to 0 will also prevent Slic3r from using bridge flow and speed for the "
 "first object layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1832
-msgid "soluble"
+#: src/libslic3r/PrintConfig.cpp:1857
+msgid "0 (soluble)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1833
-msgid "detachable"
+#: src/libslic3r/PrintConfig.cpp:1858
+msgid "0.2 (detachable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1838
+#: src/libslic3r/PrintConfig.cpp:1863
 msgid "Enforce support for the first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1840
+#: src/libslic3r/PrintConfig.cpp:1865
 msgid ""
 "Generate support material for the specified number of layers counting from "
 "bottom, regardless of whether normal support material is enabled or not and "
@@ -6379,21 +6598,21 @@ msgid ""
 "of objects having a very thin or poor footprint on the build plate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1845
+#: src/libslic3r/PrintConfig.cpp:1870
 msgid "Enforce support for the first n layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1851
+#: src/libslic3r/PrintConfig.cpp:1876
 msgid "Support material/raft/skirt extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1853
+#: src/libslic3r/PrintConfig.cpp:1878
 msgid ""
 "The extruder to use when printing support material, raft and skirt (1+, 0 to "
 "use the current extruder to minimize tool changes)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1862
+#: src/libslic3r/PrintConfig.cpp:1887
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for support "
 "material. If left zero, default extrusion width will be used if set, "
@@ -6401,89 +6620,89 @@ msgid ""
 "example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1870
+#: src/libslic3r/PrintConfig.cpp:1895
 msgid "Interface loops"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1872
+#: src/libslic3r/PrintConfig.cpp:1897
 msgid ""
 "Cover the top contact layer of the supports with loops. Disabled by default."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1877
+#: src/libslic3r/PrintConfig.cpp:1902
 msgid "Support material/raft interface extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1879
+#: src/libslic3r/PrintConfig.cpp:1904
 msgid ""
 "The extruder to use when printing support material interface (1+, 0 to use "
 "the current extruder to minimize tool changes). This affects raft too."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1886
+#: src/libslic3r/PrintConfig.cpp:1911
 msgid "Interface layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1888
+#: src/libslic3r/PrintConfig.cpp:1913
 msgid ""
 "Number of interface layers to insert between the object(s) and support "
 "material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1895
+#: src/libslic3r/PrintConfig.cpp:1920
 msgid "Interface pattern spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1897
+#: src/libslic3r/PrintConfig.cpp:1922
 msgid "Spacing between interface lines. Set zero to get a solid interface."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1906
+#: src/libslic3r/PrintConfig.cpp:1931
 msgid ""
 "Speed for printing support material interface layers. If expressed as "
 "percentage (for example 50%) it will be calculated over support material "
 "speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1915
+#: src/libslic3r/PrintConfig.cpp:1940
 msgid "Pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1917
+#: src/libslic3r/PrintConfig.cpp:1942
 msgid "Pattern used to generate support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1923
+#: src/libslic3r/PrintConfig.cpp:1948
 msgid "Rectilinear grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1929
+#: src/libslic3r/PrintConfig.cpp:1954
 msgid "Pattern spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1931
+#: src/libslic3r/PrintConfig.cpp:1956
 msgid "Spacing between support material lines."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1940
+#: src/libslic3r/PrintConfig.cpp:1965
 msgid "Speed for printing support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1947
+#: src/libslic3r/PrintConfig.cpp:1972
 msgid "Synchronize with object layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1949
+#: src/libslic3r/PrintConfig.cpp:1974
 msgid ""
 "Synchronize support layers with the object print layers. This is useful with "
 "multi-material printers, where the extruder switch is expensive."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1955
+#: src/libslic3r/PrintConfig.cpp:1980
 msgid "Overhang threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1957
+#: src/libslic3r/PrintConfig.cpp:1982
 msgid ""
 "Support material will not be generated for overhangs whose slope angle (90° "
 "= vertical) is above the given threshold. In other words, this value "
@@ -6492,54 +6711,54 @@ msgid ""
 "detection (recommended)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1969
+#: src/libslic3r/PrintConfig.cpp:1994
 msgid "With sheath around the support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1971
+#: src/libslic3r/PrintConfig.cpp:1996
 msgid ""
 "Add a sheath (a single perimeter line) around the base support. This makes "
 "the support more reliable, but also more difficult to remove."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1978
+#: src/libslic3r/PrintConfig.cpp:2003
 msgid ""
 "Extruder temperature for layers after the first one. Set this to zero to "
 "disable temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1980
+#: src/libslic3r/PrintConfig.cpp:2005
 msgid "Temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1986
+#: src/libslic3r/PrintConfig.cpp:2011
 msgid "Detect thin walls"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1988
+#: src/libslic3r/PrintConfig.cpp:2013
 msgid ""
 "Detect single-width walls (parts where two extrusions don't fit and we need "
 "to collapse them into a single trace)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1994
+#: src/libslic3r/PrintConfig.cpp:2019
 msgid "Threads"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1995
+#: src/libslic3r/PrintConfig.cpp:2020
 msgid ""
 "Threads are used to parallelize long-running tasks. Optimal threads number "
 "is slightly above the number of available cores/processors."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2007
+#: src/libslic3r/PrintConfig.cpp:2032
 msgid ""
 "This custom code is inserted right before every extruder change. Note that "
 "you can use placeholder variables for all Slic3r settings as well as "
 "[previous_extruder] and [next_extruder]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2019
+#: src/libslic3r/PrintConfig.cpp:2044
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "top surfaces. You may want to use thinner extrudates to fill all narrow "
@@ -6548,7 +6767,7 @@ msgid ""
 "percentage (for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2030
+#: src/libslic3r/PrintConfig.cpp:2055
 msgid ""
 "Speed for printing top solid layers (it only applies to the uppermost "
 "external layers and not to their internal solid layers). You may want to "
@@ -6557,43 +6776,43 @@ msgid ""
 "for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2045
+#: src/libslic3r/PrintConfig.cpp:2070
 msgid "Number of solid layers to generate on top surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2046
+#: src/libslic3r/PrintConfig.cpp:2071
 msgid "Top solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2052
+#: src/libslic3r/PrintConfig.cpp:2077
 msgid "Speed for travel moves (jumps between distant extrusion points)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2060
+#: src/libslic3r/PrintConfig.cpp:2085
 msgid "Use firmware retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2061
+#: src/libslic3r/PrintConfig.cpp:2086
 msgid ""
 "This experimental setting uses G10 and G11 commands to have the firmware "
 "handle the retraction. This is only supported in recent Marlin."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2067
+#: src/libslic3r/PrintConfig.cpp:2092
 msgid "Use relative E distances"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2068
+#: src/libslic3r/PrintConfig.cpp:2093
 msgid ""
 "If your firmware requires relative E values, check this, otherwise leave it "
 "unchecked. Most firmwares use absolute values."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2074
+#: src/libslic3r/PrintConfig.cpp:2099
 msgid "Use volumetric E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2075
+#: src/libslic3r/PrintConfig.cpp:2100
 msgid ""
 "This experimental setting uses outputs the E values in cubic millimeters "
 "instead of linear millimeters. If your firmware doesn't already know "
@@ -6603,127 +6822,127 @@ msgid ""
 "only supported in recent Marlin."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2085
+#: src/libslic3r/PrintConfig.cpp:2110
 msgid "Enable variable layer height feature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2086
+#: src/libslic3r/PrintConfig.cpp:2111
 msgid ""
 "Some printers or printer setups may have difficulties printing with a "
 "variable layer height. Enabled by default."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2092
+#: src/libslic3r/PrintConfig.cpp:2117
 msgid "Wipe while retracting"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2093
+#: src/libslic3r/PrintConfig.cpp:2118
 msgid ""
 "This flag will move the nozzle while retracting to minimize the possible "
 "blob on leaky extruders."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2100
+#: src/libslic3r/PrintConfig.cpp:2125
 msgid ""
 "Multi material printers may need to prime or purge extruders on tool "
 "changes. Extrude the excess material into the wipe tower."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2106
+#: src/libslic3r/PrintConfig.cpp:2131
 msgid "Purging volumes - load/unload volumes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2107
+#: src/libslic3r/PrintConfig.cpp:2132
 msgid ""
 "This vector saves required volumes to change from/to each tool used on the "
 "wipe tower. These values are used to simplify creation of the full purging "
 "volumes below. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2113
+#: src/libslic3r/PrintConfig.cpp:2138
 msgid "Purging volumes - matrix"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2114
+#: src/libslic3r/PrintConfig.cpp:2139
 msgid ""
 "This matrix describes volumes (in cubic milimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2123
+#: src/libslic3r/PrintConfig.cpp:2148
 msgid "Position X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2124
+#: src/libslic3r/PrintConfig.cpp:2149
 msgid "X coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2130
+#: src/libslic3r/PrintConfig.cpp:2155
 msgid "Position Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2131
+#: src/libslic3r/PrintConfig.cpp:2156
 msgid "Y coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2138
+#: src/libslic3r/PrintConfig.cpp:2163
 msgid "Width of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2144
+#: src/libslic3r/PrintConfig.cpp:2169
 msgid "Wipe tower rotation angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2145
+#: src/libslic3r/PrintConfig.cpp:2170
 msgid "Wipe tower rotation angle with respect to x-axis "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2152
+#: src/libslic3r/PrintConfig.cpp:2177
 msgid "Wipe into this object's infill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2153
+#: src/libslic3r/PrintConfig.cpp:2178
 msgid ""
 "Purging after toolchange will done inside this object's infills. This lowers "
 "the amount of waste but may result in longer print time  due to additional "
 "travel moves."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2160
+#: src/libslic3r/PrintConfig.cpp:2185
 msgid "Wipe into this object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2161
+#: src/libslic3r/PrintConfig.cpp:2186
 msgid ""
 "Object will be used to purge the nozzle after a toolchange to save material "
 "that would otherwise end up in the wipe tower and decrease print time. "
 "Colours of the objects will be mixed as a result."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2167
+#: src/libslic3r/PrintConfig.cpp:2192
 msgid "Maximal bridging distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2168
+#: src/libslic3r/PrintConfig.cpp:2193
 msgid "Maximal distance between supports on sparse infill sections. "
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2174
+#: src/libslic3r/PrintConfig.cpp:2199
 msgid "XY Size Compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2176
+#: src/libslic3r/PrintConfig.cpp:2201
 msgid ""
 "The object will be grown/shrunk in the XY plane by the configured value "
 "(negative = inwards, positive = outwards). This might be useful for fine-"
 "tuning hole sizes."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2184
+#: src/libslic3r/PrintConfig.cpp:2209
 msgid "Z offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2185
+#: src/libslic3r/PrintConfig.cpp:2210
 msgid ""
 "This value will be added (or subtracted) from all the Z coordinates in the "
 "output G-code. It is used to compensate for bad Z endstop position: for "
@@ -6731,596 +6950,596 @@ msgid ""
 "print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2202
+#: src/libslic3r/PrintConfig.cpp:2227
 msgid "Display width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2203
+#: src/libslic3r/PrintConfig.cpp:2228
 msgid "Width of the display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2208
+#: src/libslic3r/PrintConfig.cpp:2233
 msgid "Display height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2209
+#: src/libslic3r/PrintConfig.cpp:2234
 msgid "Height of the display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2214
+#: src/libslic3r/PrintConfig.cpp:2239
 msgid "Number of pixels in"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2216
+#: src/libslic3r/PrintConfig.cpp:2241
 msgid "Number of pixels in X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2222
+#: src/libslic3r/PrintConfig.cpp:2247
 msgid "Number of pixels in Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2227
+#: src/libslic3r/PrintConfig.cpp:2252
 msgid "Display orientation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2228
+#: src/libslic3r/PrintConfig.cpp:2253
 msgid ""
 "Set the actual LCD display orientation inside the SLA printer. Portrait mode "
 "will flip the meaning of display width and height parameters and the output "
 "images will be rotated by 90 degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2234
+#: src/libslic3r/PrintConfig.cpp:2259
 msgid "Landscape"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2235
+#: src/libslic3r/PrintConfig.cpp:2260
 msgid "Portrait"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2240
+#: src/libslic3r/PrintConfig.cpp:2265
 msgid "Fast"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2241
+#: src/libslic3r/PrintConfig.cpp:2266
 msgid "Fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2242
+#: src/libslic3r/PrintConfig.cpp:2267
 msgid "Time of the fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2249
+#: src/libslic3r/PrintConfig.cpp:2274
 msgid "Slow"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2250
+#: src/libslic3r/PrintConfig.cpp:2275
 msgid "Slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2251
+#: src/libslic3r/PrintConfig.cpp:2276
 msgid "Time of the slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2258
+#: src/libslic3r/PrintConfig.cpp:2283
 msgid "Area fill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2259
+#: src/libslic3r/PrintConfig.cpp:2284
 msgid ""
 "The percentage of the bed area. \n"
 "If the print area exceeds the specified value, \n"
 "then a slow tilt will be used, otherwise - a fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2266 src/libslic3r/PrintConfig.cpp:2267
-#: src/libslic3r/PrintConfig.cpp:2268
+#: src/libslic3r/PrintConfig.cpp:2291 src/libslic3r/PrintConfig.cpp:2292
+#: src/libslic3r/PrintConfig.cpp:2293
 msgid "Printer scaling correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2274 src/libslic3r/PrintConfig.cpp:2275
+#: src/libslic3r/PrintConfig.cpp:2299 src/libslic3r/PrintConfig.cpp:2300
 msgid "Printer absolute correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2276
+#: src/libslic3r/PrintConfig.cpp:2301
 msgid ""
 "Will inflate or deflate the sliced 2D polygons according to the sign of the "
 "correction."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2282 src/libslic3r/PrintConfig.cpp:2283
+#: src/libslic3r/PrintConfig.cpp:2307 src/libslic3r/PrintConfig.cpp:2308
 msgid "Printer gamma correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2284
+#: src/libslic3r/PrintConfig.cpp:2309
 msgid ""
 "This will apply a gamma correction to the rasterized 2D polygons. A gamma "
 "value of zero means thresholding with the threshold in the middle. This "
 "behaviour eliminates antialiasing without losing holes in polygons."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2295 src/libslic3r/PrintConfig.cpp:2296
+#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2321
 msgid "Initial layer height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2302
+#: src/libslic3r/PrintConfig.cpp:2327
 msgid "Faded layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2303
+#: src/libslic3r/PrintConfig.cpp:2328
 msgid ""
 "Number of the layers needed for the exposure time fade from initial exposure "
 "time to the exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2310 src/libslic3r/PrintConfig.cpp:2311
+#: src/libslic3r/PrintConfig.cpp:2335 src/libslic3r/PrintConfig.cpp:2336
 msgid "Exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2317 src/libslic3r/PrintConfig.cpp:2318
+#: src/libslic3r/PrintConfig.cpp:2342 src/libslic3r/PrintConfig.cpp:2343
 msgid "Initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2324 src/libslic3r/PrintConfig.cpp:2325
+#: src/libslic3r/PrintConfig.cpp:2349 src/libslic3r/PrintConfig.cpp:2350
 msgid "Correction for expansion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2331
+#: src/libslic3r/PrintConfig.cpp:2356
 msgid "SLA print material notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2332
+#: src/libslic3r/PrintConfig.cpp:2357
 msgid "You can put your notes regarding the SLA print material here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2340 src/libslic3r/PrintConfig.cpp:2351
+#: src/libslic3r/PrintConfig.cpp:2365 src/libslic3r/PrintConfig.cpp:2376
 msgid "Default SLA material profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2362
+#: src/libslic3r/PrintConfig.cpp:2387
 msgid "Generate supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2364
+#: src/libslic3r/PrintConfig.cpp:2389
 msgid "Generate supports for the models"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2369
+#: src/libslic3r/PrintConfig.cpp:2394
 msgid "Support head front diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2371
+#: src/libslic3r/PrintConfig.cpp:2396
 msgid "Diameter of the pointing side of the head"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2378
+#: src/libslic3r/PrintConfig.cpp:2403
 msgid "Support head penetration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2380
+#: src/libslic3r/PrintConfig.cpp:2405
 msgid "How much the pinhead has to penetrate the model surface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2387
+#: src/libslic3r/PrintConfig.cpp:2412
 msgid "Support head width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2389
+#: src/libslic3r/PrintConfig.cpp:2414
 msgid "Width from the back sphere center to the front sphere center"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2397
+#: src/libslic3r/PrintConfig.cpp:2422
 msgid "Support pillar diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2399
+#: src/libslic3r/PrintConfig.cpp:2424
 msgid "Diameter in mm of the support pillars"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2407
+#: src/libslic3r/PrintConfig.cpp:2432
 msgid "Support pillar connection mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2408
+#: src/libslic3r/PrintConfig.cpp:2433
 msgid ""
-"Controls the bridge type between two neigboring pillars. Can be zig-zag, "
+"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
 "cross (double zig-zag) or dynamic which will automatically switch between "
 "the first two depending on the distance of the two pillars."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2416
+#: src/libslic3r/PrintConfig.cpp:2441
 msgid "Zig-Zag"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2417
+#: src/libslic3r/PrintConfig.cpp:2442
 msgid "Cross"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2418
+#: src/libslic3r/PrintConfig.cpp:2443
 msgid "Dynamic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2430
+#: src/libslic3r/PrintConfig.cpp:2455
 msgid "Pillar widening factor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2432
+#: src/libslic3r/PrintConfig.cpp:2457
 msgid ""
 "Merging bridges or pillars into another pillars can increase the radius. "
 "Zero means no increase, one means full increase."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2441
+#: src/libslic3r/PrintConfig.cpp:2466
 msgid "Support base diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2443
+#: src/libslic3r/PrintConfig.cpp:2468
 msgid "Diameter in mm of the pillar base"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2451
+#: src/libslic3r/PrintConfig.cpp:2476
 msgid "Support base height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2453
+#: src/libslic3r/PrintConfig.cpp:2478
 msgid "The height of the pillar base cone"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2460
+#: src/libslic3r/PrintConfig.cpp:2485
 msgid "Critical angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2462
+#: src/libslic3r/PrintConfig.cpp:2487
 msgid "The default angle for connecting support sticks and junctions."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2470
+#: src/libslic3r/PrintConfig.cpp:2495
 msgid "Max bridge length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2472
+#: src/libslic3r/PrintConfig.cpp:2497
 msgid "The max length of a bridge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2479
+#: src/libslic3r/PrintConfig.cpp:2504
 msgid "Max pillar linking distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2481
+#: src/libslic3r/PrintConfig.cpp:2506
 msgid ""
 "The max distance of two pillars to get linked with each other. A zero value "
 "will prohibit pillar cascading."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2489
+#: src/libslic3r/PrintConfig.cpp:2514
 msgid "Object elevation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2491
+#: src/libslic3r/PrintConfig.cpp:2516
 msgid "How much the supports should lift up the supported object."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2499
+#: src/libslic3r/PrintConfig.cpp:2524
 msgid "Support points density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2501
+#: src/libslic3r/PrintConfig.cpp:2526
 msgid "This is a relative measure of support points density."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2507
+#: src/libslic3r/PrintConfig.cpp:2532
 msgid "Minimal distance of the support points"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2509
+#: src/libslic3r/PrintConfig.cpp:2534
 msgid "No support points will be placed closer than this threshold."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2515
+#: src/libslic3r/PrintConfig.cpp:2540
 msgid "Use pad"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2517
+#: src/libslic3r/PrintConfig.cpp:2542
 msgid "Add a pad underneath the supported model"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2522
+#: src/libslic3r/PrintConfig.cpp:2547
 msgid "Pad wall thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2524
+#: src/libslic3r/PrintConfig.cpp:2549
 msgid "The thickness of the pad and its optional cavity walls."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2532
+#: src/libslic3r/PrintConfig.cpp:2557
 msgid "Pad wall height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2533
+#: src/libslic3r/PrintConfig.cpp:2558
 msgid ""
 "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
 "when enabling this feature, as some resins may produce an extreme suction "
-"effect inside the cavity, which makes pealing the print off the vat foil "
+"effect inside the cavity, which makes peeling the print off the vat foil "
 "difficult."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2546
+#: src/libslic3r/PrintConfig.cpp:2571
 msgid "Max merge distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2548
+#: src/libslic3r/PrintConfig.cpp:2573
 msgid ""
 "Some objects can get along with a few smaller pads instead of a single big "
 "one. This parameter defines how far the center of two smaller pads should "
 "be. If theyare closer, they will get merged into one pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2559
+#: src/libslic3r/PrintConfig.cpp:2584
 msgid "Pad edge radius"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2568
+#: src/libslic3r/PrintConfig.cpp:2593
 msgid "Pad wall slope"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2570
+#: src/libslic3r/PrintConfig.cpp:2595
 msgid ""
 "The slope of the pad wall relative to the bed plane. 90 degrees means "
 "straight walls."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2572
+#: src/libslic3r/PrintConfig.cpp:2597
 msgid "degrees"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2931
+#: src/libslic3r/PrintConfig.cpp:2957
 msgid "Export OBJ"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2932
+#: src/libslic3r/PrintConfig.cpp:2958
 msgid "Export the model(s) as OBJ."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2943
+#: src/libslic3r/PrintConfig.cpp:2969
 msgid "Export SLA"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2944
+#: src/libslic3r/PrintConfig.cpp:2970
 msgid "Slice the model and export SLA printing layers as PNG."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2949
+#: src/libslic3r/PrintConfig.cpp:2975
 msgid "Export 3MF"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2950
+#: src/libslic3r/PrintConfig.cpp:2976
 msgid "Export the model(s) as 3MF."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2954
+#: src/libslic3r/PrintConfig.cpp:2980
 msgid "Export AMF"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2955
+#: src/libslic3r/PrintConfig.cpp:2981
 msgid "Export the model(s) as AMF."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2959
+#: src/libslic3r/PrintConfig.cpp:2985
 msgid "Export STL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2960
+#: src/libslic3r/PrintConfig.cpp:2986
 msgid "Export the model(s) as STL."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2965
+#: src/libslic3r/PrintConfig.cpp:2991
 msgid "Slice the model and export toolpaths as G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2970
+#: src/libslic3r/PrintConfig.cpp:2996
 msgid "Slice"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2971
+#: src/libslic3r/PrintConfig.cpp:2997
 msgid ""
 "Slice the model as FFF or SLA based on the printer_technology configuration "
 "value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2976
+#: src/libslic3r/PrintConfig.cpp:3002
 msgid "Help"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2977
+#: src/libslic3r/PrintConfig.cpp:3003
 msgid "Show this help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2982
+#: src/libslic3r/PrintConfig.cpp:3008
 msgid "Help (FFF options)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2983
+#: src/libslic3r/PrintConfig.cpp:3009
 msgid "Show the full list of print/G-code configuration options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2987
+#: src/libslic3r/PrintConfig.cpp:3013
 msgid "Help (SLA options)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2988
+#: src/libslic3r/PrintConfig.cpp:3014
 msgid "Show the full list of SLA print configuration options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2992
+#: src/libslic3r/PrintConfig.cpp:3018
 msgid "Output Model Info"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2993
+#: src/libslic3r/PrintConfig.cpp:3019
 msgid "Write information about the model to the console."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2997
+#: src/libslic3r/PrintConfig.cpp:3023
 msgid "Save config file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2998
+#: src/libslic3r/PrintConfig.cpp:3024
 msgid "Save configuration to the specified file."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3008
+#: src/libslic3r/PrintConfig.cpp:3034
 msgid "Align XY"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3009
+#: src/libslic3r/PrintConfig.cpp:3035
 msgid "Align the model to the given point."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3014
+#: src/libslic3r/PrintConfig.cpp:3040
 msgid "Cut model at the given Z."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3035
+#: src/libslic3r/PrintConfig.cpp:3061
 msgid "Center"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3036
+#: src/libslic3r/PrintConfig.cpp:3062
 msgid "Center the print around the given center."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3040
+#: src/libslic3r/PrintConfig.cpp:3066
 msgid "Don't arrange"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3041
+#: src/libslic3r/PrintConfig.cpp:3067
 msgid ""
 "Do not rearrange the given models before merging and keep their original XY "
 "coordinates."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3044
+#: src/libslic3r/PrintConfig.cpp:3070
 msgid "Duplicate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3045
+#: src/libslic3r/PrintConfig.cpp:3071
 msgid "Multiply copies by this factor."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3049
+#: src/libslic3r/PrintConfig.cpp:3075
 msgid "Duplicate by grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3050
+#: src/libslic3r/PrintConfig.cpp:3076
 msgid "Multiply copies by creating a grid."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3053
+#: src/libslic3r/PrintConfig.cpp:3079
 msgid "Merge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3054
+#: src/libslic3r/PrintConfig.cpp:3080
 msgid ""
 "Arrange the supplied models in a plate and merge them in a single model in "
 "order to perform actions once."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3059
+#: src/libslic3r/PrintConfig.cpp:3085
 msgid ""
 "Try to repair any non-manifold meshes (this option is implicitly added "
 "whenever we need to slice the model to perform the requested action)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3063
+#: src/libslic3r/PrintConfig.cpp:3089
 msgid "Rotation angle around the Z axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3067
+#: src/libslic3r/PrintConfig.cpp:3093
 msgid "Rotate around X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3068
+#: src/libslic3r/PrintConfig.cpp:3094
 msgid "Rotation angle around the X axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3072
+#: src/libslic3r/PrintConfig.cpp:3098
 msgid "Rotate around Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3073
+#: src/libslic3r/PrintConfig.cpp:3099
 msgid "Rotation angle around the Y axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3078
+#: src/libslic3r/PrintConfig.cpp:3104
 msgid "Scaling factor or percentage."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3083
+#: src/libslic3r/PrintConfig.cpp:3109
 msgid ""
 "Detect unconnected parts in the given model(s) and split them into separate "
 "objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3086
+#: src/libslic3r/PrintConfig.cpp:3112
 msgid "Scale to Fit"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3087
+#: src/libslic3r/PrintConfig.cpp:3113
 msgid "Scale to fit the given volume."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3096
+#: src/libslic3r/PrintConfig.cpp:3122
 msgid "Ignore non-existent config files"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3097
+#: src/libslic3r/PrintConfig.cpp:3123
 msgid "Do not fail if a file supplied to --load does not exist."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3100
+#: src/libslic3r/PrintConfig.cpp:3126
 msgid "Load config file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3101
+#: src/libslic3r/PrintConfig.cpp:3127
 msgid ""
 "Load configuration from the specified file. It can be used more than once to "
 "load options from multiple files."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3104
+#: src/libslic3r/PrintConfig.cpp:3130
 msgid "Output File"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3105
+#: src/libslic3r/PrintConfig.cpp:3131
 msgid ""
 "The file where the output will be written (if not specified, it will be "
 "based on the input file)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3115
+#: src/libslic3r/PrintConfig.cpp:3141
 msgid "Data directory"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3116
+#: src/libslic3r/PrintConfig.cpp:3142
 msgid ""
 "Load and store settings at the given directory. This is useful for "
 "maintaining different profiles or including configurations from a network "
 "storage."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3119
+#: src/libslic3r/PrintConfig.cpp:3145
 msgid "Logging level"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3120
+#: src/libslic3r/PrintConfig.cpp:3146
 msgid ""
 "Messages with severity lower or eqal to the loglevel will be printed out. 0:"
 "trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3125
+#: src/libslic3r/PrintConfig.cpp:3151
 msgid "Render with a software renderer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3126
+#: src/libslic3r/PrintConfig.cpp:3152
 msgid ""
 "Render with a software renderer. The bundled MESA software renderer is "
 "loaded instead of the default OpenGL driver."