diff options
Diffstat (limited to 'resources/profiles/INAT.ini')
| -rw-r--r-- | resources/profiles/INAT.ini | 467 |
1 files changed, 467 insertions, 0 deletions
diff --git a/resources/profiles/INAT.ini b/resources/profiles/INAT.ini new file mode 100644 index 000000000..81a4f90ef --- /dev/null +++ b/resources/profiles/INAT.ini @@ -0,0 +1,467 @@ +# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC + +[vendor] +# Vendor name will be shown by the Config Wizard. +name = INAT +config_version = 0.0.2 +config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/INAT/ + +### +### PRINTER LIST +### + +[printer_model:PROTON_X_RAIL] +name = INAT Proton X Rail +variants = 0.4 +technology = FFF +family = Proton + +[printer_model:PROTON_X_ROD] +name = INAT Proton X Rod +variants = 0.4 +technology = FFF +family = Proton + + +### +### QUALITY DEFINITIONS +### + +[print:*common*] +#layers +layer_height = 0.2 +first_layer_height = 0.2 +perimeters = 3 +spiral_vase = 0 +top_solid_layers = 4 +bottom_solid_layers = 3 +top_solid_min_thickness = 0.8 +bottom_solid_min_thickness = 0.6 +extra_perimeters = 1 +ensure_vertical_shell_thickness = 1 +avoid_crossing_perimeters = 0 +thin_walls = 0 +overhangs = 1 +seam_position = aligned +external_perimeters_first = 0 +#infill +fill_density = 30% +fill_pattern = cubic +infill_anchor = 600% +infill_anchor_max = 30 +top_fill_pattern = monotonic +bottom_fill_patter = monotonic +ironing = 0 +ironing_type = top +infill_every_layers = 1 +infill_only_where_needed = 0 +solid_infill_every_layers = 0 +fill_angle = 45 +solid_infill_below_area = 20 +bridge_angle = 0 +only_retract_when_crossing_perimeters = 0 +infill_first = 0 +#skirt brim +skirts = 5 +skirt_distance = 15 +skirt_height = 1 +draft_shield = 0 +min_skirt_length = 5 +brim_width = 0 +#support +support_material = 0 +support_material_auto = 1 +support_material_threshold = 0 +support_material_enforce_layers = 0 +raft_layers = 0 +support_material_contact_distance = 0.2 +support_material_pattern = rectilinear +support_material_with_sheath = 0 +support_material_spacing = 5 +support_material_angle = 45 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_contact_loops = 0 +support_material_buildplate_only = 0 +support_material_xy_spacing = 1 +dont_support_bridges = 1 +#speed +perimeter_speed = 60 +small_perimeter_speed = 75% +external_perimeter_speed = 50% +infill_speed = 80 +solid_infill_speed = 100% +top_solid_infill_speed = 30 +support_material_speed = 80 +support_material_interface_speed = 100% +bridge_speed = 60 +gap_fill_speed = 40 +ironing_speed = 30 +travel_speed = 150 +first_layer_speed = 30 +default_acceleration = 0 +max_print_speed = 80 +max_volumetric_speed = 12 +#multiple extruders +perimeter_extruder = 1 +infill_extruder = 1 +solid_infill_extruder = 1 +support_material_extruder = 1 +support_material_interface_extruder = 1 +ooze_prevention = 0 +wipe_tower = 0 +interface_shells = 0 +#advanced +extrusion_width = 0 +first_layer_extrusion_width = 0 +perimeter_extrusion_width = 0 +external_perimeter_extrusion_width = 0 +infill_extrusion_width = 0 +solid_infill_extrusion_width = 0 +top_infill_extrusion_width = 0 +support_material_extrusion_width = 0 +infill_overlap = 25% +bridge_flow_ratio = 1 +slice_closing_radius = 0.049 +resolution = 0 +xy_size_compensation = 0 +elefant_foot_compensation = 0.3 +clip_multipart_objects = 0 +#output +complete_objects = 0 +extruder_clearance_radius = 85 +extruder_clearance_height = 34 +gcode_comments = 0 +gcode_label_objects = 0 +output_filename_format = {input_filename_base}_{filament_type[0]}.gcode + + +[print:0.2mm Standard @PROTON_X] +inherits = *common* + +[print:0.2mm Strong @PROTON_X] +inherits = *common* +fill_density = 50% +perimeters = 6 + +[print:0.2mm Advanced Material @PROTON_X] +inherits = *common* +bottom_solid_layers = 5 +top_solid_layers = 6 +skirts = 0 +brim_width = 30 +infill_speed = 60 +support_material_speed = 60 +travel_speed = 100 +first_layer_speed = 20 +elefant_foot_compensation = 0 + +[print:0.12mm Fine @PROTON_X] +inherits = *common* +bottom_solid_layers = 7 +top_solid_layers = 7 +infill_every_layers = 2 +perimeter_speed = 50 +infill_speed = 50 + +[print:0.32mm Draft @PROTON_X] +inherits = *common* +perimeter_speed = 80 +external_perimeter_speed = 75% +infill_speed = 100 +top_solid_infill_speed = 60 +fill_density = 15% + +### +### PRINTER DEFINITIONS +### + +[printer:*common*] +printer_vendor = INAT s.r.o. +default_filament_profile = "PLA @PROTON_X" +#general +printer_technology = FFF +bed_shape = 0x0,304x0,304x304,0x304 +max_print_height = 650 +z_offset = 0 +extruders_count = 1 +gcode_flavor = marlin +silent_mode = 0 +remaining_times = 1 +use_relative_e_distances = 0 +use_firmware_retraction = 0 +use_volumetric_e = 0 +variable_layer_height = 1 +#gcodes +start_gcode = G28 ;Home\nG0 X-2 Y150 F6000 ;Move to the side\nG0 Z0.3 F200 ;Move nozzle down\nM192 ; Wait for probe temperature to settle\nG28 Z\nG29\nG0 X0 Y0 Z30 F6000\nM84 E\nM0\nG1 Z15.0 F6000 ;Move the platform down 15mm\n +end_gcode = M400\nM104 S0\nM140 S0\nM107\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X R5\nG0 Y300 F2000\nM84\n +color_change_gcode = M600 +#limits +machine_limits_usage = emit_to_gcode +machine_max_feedrate_x = 200,200 +machine_max_feedrate_y = 200,200 +machine_max_feedrate_z = 10,10 +machine_max_feedrate_e = 100,100 +machine_max_acceleration_x = 500,500 +machine_max_acceleration_y = 500,500 +machine_max_acceleration_z = 100,100 +machine_max_acceleration_e = 2000,2000 +machine_max_acceleration_extruding = 1000,1000 +machine_max_acceleration_retracting = 1500,1500 +machine_max_jerk_x = 8,8 +machine_max_jerk_y = 8,8 +machine_max_jerk_z = 1,1 +machine_max_jerk_e = 2.5,2.5 +machine_min_extruding_rate = 5 +#extruder 1 +nozzle_diameter = 0.4 +min_layer_height = 0.05 +max_layer_height = 0.33 +extruder_offset = 0x0 +retract_length = 1.5 +retract_lift = 0.6 +retract_lift_above = 0 +retract_lift_below = 0 +retract_speed = 45 +deretract_speed = 0 +retract_restart_extra = 0 +retract_before_travel = 2 +retract_layer_change = 0 +wipe = 1 +retract_before_wipe = 100% + + +[printer:Proton X Rail] +inherits = *common* +printer_model = PROTON_X_RAIL +printer_variant = 0.4 +default_print_profile = 0.2mm Standard @PROTON_X +gcode_flavor = marlin +machine_max_acceleration_y = 800,800 + +[printer:Proton X Rod] +inherits = *common* +printer_model = PROTON_X_ROD +printer_variant = 0.4 +default_print_profile = 0.2mm Standard @PROTON_X +gcode_flavor = marlin + + +### +### MATERIAL DEFINITIONS +### + +[filament:*common*] +#filament +filament_colour = #29B2B2 +filament_diameter = 1.75 +extrusion_multiplier = 1 +filament_vendor = Generic +#cooling +fan_always_on = 0 +cooling = 1 +bridge_fan_speed = 100 +disable_fan_first_layers = 3 +full_fan_speed_layer = 0 +fan_below_layer_time = 10 +slowdown_below_layer_time = 5 +min_print_speed = 10 +#advanced +filament_soluble = 0 + + +[filament:PLA @PROTON_X] +inherits = *common* +temperature = 210 +bed_temperature = 60 +first_layer_temperature = 210 +first_layer_bed_temperature = 60 +filament_type = PLA +filament_cost = 20 +filament_density = 1.25 +min_fan_speed = 50 +max_fan_speed = 100 + + +[filament:PETG @PROTON_X] +inherits = *common* +temperature = 240 +bed_temperature = 80 +first_layer_temperature = 240 +first_layer_bed_temperature = 80 +filament_type = PETG +filament_cost = 25 +filament_density = 1.27 +min_fan_speed = 0 +max_fan_speed = 50 + +[filament:ABS @PROTON_X] +inherits = *common* +temperature = 235 +bed_temperature = 100 +first_layer_temperature = 235 +first_layer_bed_temperature = 100 +filament_type = ABS +filament_cost = 20 +filament_density = 1.01 +cooling = 0 +bridge_fan_speed = 0 + +[filament:ASA @PROTON_X] +inherits = *common* +temperature = 240 +bed_temperature = 110 +first_layer_temperature = 240 +first_layer_bed_temperature = 110 +filament_type = ASA +filament_cost = 22 +filament_density = 1.07 +cooling = 0 + +[filament:TPE @PROTON_X] +inherits = *common* +temperature = 220 +bed_temperature = 40 +first_layer_temperature = 220 +first_layer_bed_temperature = 40 +filament_type = TPE +filament_cost = 32 +filament_density = 0.9 +min_fan_speed = 0 +max_fan_speed = 50 +filament_retract_length = 0.8 +filament_retract_speed = 25 + +[filament:HIPS @PROTON_X] +inherits = *common* +temperature = 245 +bed_temperature = 100 +first_layer_temperature = 245 +first_layer_bed_temperature = 100 +filament_type = HIPS +filament_cost = 15 +filament_density = 1.04 +min_fan_speed = 0 +max_fan_speed = 50 +filament_soluble = 1 + +[filament:Nylon @PROTON_X] +inherits = *common* +temperature = 235 +bed_temperature = 130 +first_layer_temperature = 235 +first_layer_bed_temperature = 130 +filament_type = Nylon +filament_cost = 70 +filament_density = 1.01 +cooling = 0 +bridge_fan_speed = 0 + +[filament:PC @PROTON_X] +inherits = *common* +temperature = 270 +bed_temperature = 130 +first_layer_temperature = 270 +first_layer_bed_temperature = 130 +filament_type = PC +filament_cost = 65 +filament_density = 1.19 +cooling = 0 +bridge_fan_speed = 0 + +[filament:CPE @PROTON_X] +inherits = *common* +temperature = 280 +bed_temperature = 90 +first_layer_temperature = 280 +first_layer_bed_temperature = 90 +filament_type = PEI +filament_cost = 380 +filament_density = 1.27 +cooling = 0 +bridge_fan_speed = 0 + +[filament:PEEK @PROTON_X] +inherits = *common* +temperature = 440 +bed_temperature = 150 +first_layer_temperature = 440 +first_layer_bed_temperature = 150 +filament_type = PEEK +filament_cost = 500 +filament_density = 1.3 +cooling = 0 +bridge_fan_speed = 0 + +[filament:PEI @PROTON_X] +inherits = *common* +temperature = 400 +bed_temperature = 150 +first_layer_temperature = 400 +first_layer_bed_temperature = 150 +filament_type = PEI +filament_cost = 380 +filament_density = 1.27 +cooling = 0 +bridge_fan_speed = 0 + +[filament:Polymaker PolyMide CoPA @PROTON_X] +inherits = *common* +filament_vendor = Polymaker +temperature = 265 +bed_temperature = 50 +first_layer_temperature = 265 +first_layer_bed_temperature = 50 +filament_type = Nylon +filament_cost = 93 +filament_density = 1.12 +cooling = 0 + +[filament:Polymaker PolyMide PA6-CF @PROTON_X] +inherits = *common* +filament_vendor = Polymaker +temperature = 300 +bed_temperature = 40 +first_layer_temperature = 300 +first_layer_bed_temperature = 40 +filament_type = Nylon +filament_cost = 95 +filament_density = 1.17 +cooling = 0 + +[filament:Polymaker PolyMide PA6-GF @PROTON_X] +inherits = *common* +filament_vendor = Polymaker +temperature = 300 +bed_temperature = 40 +first_layer_temperature = 300 +first_layer_bed_temperature = 40 +filament_type = Nylon +filament_cost = 95 +filament_density = 1.2 +cooling = 0 + +[filament:Devil Design PETG @PROTON_X] +inherits = *common* +filament_vendor = Devil Design +temperature = 250 +bed_temperature = 80 +first_layer_temperature = 250 +first_layer_bed_temperature = 80 +filament_type = PETG +filament_cost = 22 +filament_density = 1.23 +min_fan_speed = 0 +max_fan_speed = 50 + +[filament:Filament PM PETG FRJet @PROTON_X] +inherits = *common* +filament_vendor = Filament PM +temperature = 250 +bed_temperature = 90 +first_layer_temperature = 250 +first_layer_bed_temperature = 90 +filament_type = PETG +filament_cost = 45.5 +filament_density = 1.27 +cooling = 0 |