diff options
Diffstat (limited to 'src/avrdude/ChangeLog-2003')
| -rw-r--r-- | src/avrdude/ChangeLog-2003 | 1095 |
1 files changed, 1095 insertions, 0 deletions
diff --git a/src/avrdude/ChangeLog-2003 b/src/avrdude/ChangeLog-2003 new file mode 100644 index 000000000..1115bdfbc --- /dev/null +++ b/src/avrdude/ChangeLog-2003 @@ -0,0 +1,1095 @@ +2003-12-01 Eric B. Weddington <eric@ecentral.com> + + * doc/avrdude.texi: Update devices and programmers supported. + +2003-12-01 Eric B. Weddington <eric@ecentral.com> + + * doc/avrdude.texi: Add missing -D option to user manual. + [This fixes bug #6804] + +2003-11-30 Jan-Hinnerk Reichert <hinni@despammed.com> + + * avrpart.c,main.c: Moved list_parts() and locate_part() + from main.c to avrpart.c. + * avrpart.h: Added prototypes for list_parts() and + locate_part(). + +2003-11-30 Jan-Hinnerk Reichert <hinni@despammed.com> + + * avrpart.c, avr.c: Moved elementary functions on types + OPCODE, AVRMEM and AVRPART from avr.c to new file avrpart.c. + * avr.h: Removed prototypes for moved functions. + * avrpart.h: Added prototypes for functions in avrpart.c. + * Makefile.am: Added new file avrpart.c. + +2003-11-28 Michael Mayer <michael-mayer@gmx.de> + + * lexer.l: New programmer type "butterfly". + * config_gram.y: New token K_BUTTERFLY. + * avrdude.conf.in: Added programmer definition. + * butterfly.c, butterfly.h: Cloned from avr910.?, changed to work + with the Atmel Butterfly device. + * Makefile.am: Added butterfly.[ch] to avrdude_SOURCES. + +2003-11-26 Joerg Wunsch <j@uriah.heep.sax.de> + + * main.c: Make the -U parser tolerate colons in filenames. + * avrdude.1, doc/avrdude.texi: Document the -U changes. + +2003-11-21 Jan-Hinnerk Reichert <hinni@despammed.com> + + * ppi.c: Major speed tuning. Since ioctl() is expensive read from + shadowregisters where possible. + +2003-11-19 Eric B. Weddington <eric@ecentral.com> + + * NEWS: Update news from items in ChangeLog. + +2003-11-19 Theodore A. Roth <troth@openavr.org> +[Contributed by Jan-Hinnerk Reichert <jan-hinnerk_reichert@hamburg.de>] + + * avr.c (avr_write_byte_default): Improve polling algorithm to speed up + programming of byte oriented parallel programmers. + +2003-11-14 Brian S. Dean <bsd@bsdhome.com> +[Contributed by Erik Christiansen <erik@dd.nec.com.au>] + + * avrdude.conf.in: + Add ATmega64 part. + +2003-11-08 Joerg Wunsch <j@uriah.heep.sax.de> + + * avrdude.conf.in: + Add "fuse" and "lock" definitions for the AT90S8535. Actually, + this is stolen from the AT90S8515 since the datasheet says it's + the same there. + +2003-10-13 Bill Somerville <bill@classdesign.com> + + * stk500.c (stk500_paged_write): Limit blocks written to no bigger + than memory device size. + (stk500_paged_write): Send whole block at once. + (stk500_paged_load): Limit blocks read to no bigger than memory + device size. + [This fixes bug #5713.] + +2003-10-13 Eric B. Weddington <eric@ecentral.com> + + * avrdude.conf.in: Fix for unterminated character error. + +2003-10-13 Eric B. Weddington <eric@ecentral.com> + + * avrdude.conf.in: Add ATmega8515 definition. + Contributed by: Matthias Weißer <matthias@matwei.de> + * NEWS: Add note about ATmega8515 definition. + +2003-09-24 Eric B. Weddington <eric@ecentral.com> + + * doc/TODO: Updated TODO list. + +2003-09-22 Eric B. Weddington <eric@ecentral.com> + + * windows/Makefile.am: Correct makefile so loaddrv does not link + to Cygwin DLL. + +2003-09-18 Eric B. Weddington <eric@ecentral.com> + + * doc/avrdude.texi: Minor corrections. Change description of -P + to reference platform dependencies. + +2003-09-16 Eric B. Weddington <eric@ecentral.com> + + * stk500.c: If writing flash, skip empty pages in paged write. + +2003-09-06 Theodore A. Roth <troth@openavr.org> + + * NEWS: Add 'Current:' header. + * configure.ac (AC_INIT): Add cvs back to version since we're + back in dev cycle (post release). + +2003-09-06 Theodore A. Roth <troth@openavr.org> + + * AVRDUDE 4.2.0 has been released (cvs release tag is "release_4_2_0"). + +2003-09-06 Theodore A. Roth <troth@openavr.org> + + * NEWS: Update for 4.2.0 release. Add note about read/write of fuses + support for avr910. + * configure.ac (AC_INIT): Set version to 4.2.0. + +2003-09-05 Theodore A. Roth <troth@openavr.org> +[Contributed by Jan-Hinnerk Reichert <jan-hinnerk_reichert@hamburg.de>] + + * avr.c (avr_read_byte): If pgm->read_byte method fails, retry with + avr_read_byte_default. + * avr.c (avr_write_byte): If pgm->write_byte method fails, retry with + avr_write_byte_default. + * avr910.c (avr910_cmd): Implement using universal command. + +2003-09-04 Theodore A. Roth <troth@openavr.org> + + * Makefile.am: Change AM_CPPFLAGS to avrdude_CPPFLAGS. + Define avrdude_CFLAGS. + * configure.ac: Set ENABLE_WARNINGS to "-Wall" if using gcc. + +2003-09-02 Eric B. Weddington <eric@ecentral.com> + + * doc/avrdude.texi: Add note about privileges needed to load + the giveio driver for Windows. + +2003-08-29 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.1: + * main.c: + Perform an auto erase before programming if the flash memory is + anywhere specified to be written by any of the -U requests. + + To remain backward compatible with previous versions, disable this + feature if any of the old-style memory specification operations are + specified (-i, -o). + + Implement the -D option to explicitly disable the auto erase default. + + Deprecate the old-style memory specification options (-f, -i, -I, -m, + and -o) in favor of the new -U option which allows one to operate on + multiple memories on a single command line. + +2003-08-28 Eric B. Weddington <eric@ecentral.com> + + * avr910.c: + * fileio.c: + * main.c: + * stk500.c: + More code cleanup to remove warnings. + +2003-08-27 Theodore A. Roth <troth@openavr.org> + + * main.c (update_progress_no_tty): Properly terminate progress. Also + fixes stk500 problem where number of bytes written is less than a page. + +2003-08-27 Theodore A. Roth <troth@openavr.org> + + * avrdude.spec.in: Fix broken rpmbuild on RedHat-9. + +2003-08-25 Eric B. Weddington <eric@ecentral.com> + + * fileio.c: + * main.c: + * ppiwin.c: + * ser_posix.c: + * stk500.c: + Minor code cleanup to remove warnings. + +2003-08-21 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.1: + * main.c: + + Introduce a new option, -U, for performing memory operions. + Its argument is a 4 field string (fields seperated by colons) + which indicate what memory type to operate on, what operation + to perform is (read, write, or verify), the filename to read + from, write to, or verify against, and an optional file format + field. Multple -U options can be specified to operate on more + than one memory at a time with a single invocation. For + example, to update both the flash and the eeprom at the same + time one can now specify the following: + + avrdude -p -e -U flash:w:main.hex:i -U eeprom:w:eeprom.hex:i + +2003-08-20 Brian S. Dean <bsd@bsdhome.com> + + * ppiwin.c: + Timing related fixes for the Windows platform. Several folks have + reported that this patch fixes verify errors on the Windows platform + that are apparently timing related. Submitted by: Alex Shepherd + <ashepherd@wave.co.nz>, who indicates that this patch was based on + code from the UISP project. + +2003-08-01 Theodore A. Roth <troth@openavr.org> + + * avrdude.1: Document the -q option. + * doc/avrdude.texi: Document the -q option. + Fix some typos left over from pasting in man output. + +2003-07-30 Brian S. Dean <bsd@bsdhome.com> + + * main.c: Add elapsed time information to the new progress bar. + +2003-07-29 Theodore A. Roth <troth@openavr.org> + + * avr.c: + * avr.h: + * avr910.c: + * main.c: + * stk500.c: + New progress reporting implementation. + +2003-07-24 Joerg Wunsch <j@uriah.heep.sax.de> + + * avrdude.1: + * doc/avrdude.texi: + * pgm.c: + * pgm.h: + * stk500.c: + * stk500_private.h: + * term.c: Add support for displaying and setting the various + operational parameters of the STK500 (Vtarget, Varef, clock). + +2003/07/22 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.conf.in: + Add 'picoweb' programming cable programmer. + Contributed by Rune Christensen <rune.christensen@adslhome.dk>. + +2003-06-18 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.conf.in: + Add the 'sp12' (Steve Bolt's) programmer. + Submitted by Larry Barello <larryba@barello.net>. + +2003-06-17 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.conf.in: + Properly identify the "ALF" programmer. + + Extend ATmega8 calibration memory to support all 4 calibration bytes. + Savannah bug #3835. Submitted by Francisco T. A. Silva + <ftas@geodigitus.com.br>. + + Add a few AVR910 programmer device codes. Savannah bug #3569 - sorry + I can't tell who submitted this to give proper credit. + + Add support for the ATtiny12. Submitted by Pontifex <pontifex@isys.ca> + +2003-05-22 Brian S. Dean <bsd@bsdhome.com> + + * avr.c: + * avr.h: + * fileio.c: + Optimize flash memory handling a little bit by ignoring 0xff data that + resides above the last non-0xff data value in the address space. Only + do this for flash memory since writing a 0xff to flash is a no-op. + This has the affect of creating smaller output files when dumping + memory contents from flash if the program in flash does not consume + the whole memory space. It also results in shorter programming times + when avrdude is asked to load a file into flash that has lots of 0xff + filled data past the last non-0xff data value. + +2003-05-13 Theodore A. Roth <troth@openavr.org> + + * avr910.c (avr910_paged_write_flash): Add code to send the 'm' + command ("issue page write" cmd) for each page. + +2003-05-13 Theodore A. Roth <troth@openavr.org> + + * avrdude.conf.in: Add pagel and bs2 entries for at90s1200 device. + +2003-05-13 Theodore A. Roth <troth@openavr.org> + + * doc/TODO: Add note about avr910 device codes. + +2003-05-04 Theodore A. Roth <troth@openavr.org> + + * configure.ac: Check for ncurses library (since it can be a + replacement for termcap). + +2003-05-02 Theodore A. Roth <troth@openavr.org> + + * avrdude.conf.in: Add avr decodes for devices known in avr910 + firmware version 2.3. + Add missing stk500 devocde for 2343. + +2003-04-23 Eric B. Weddington <eric@ecentral.com> + + * fileio.c: Fix for bug #3293. Set correct open mode for raw format + for Windows. + +2003-04-19 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.1: + * fileio.c: + * fileio.h: + * main.c: + Implement and "immediate mode" for file input - this allows + one to specify byte values on the command line instead of via + a file. This can be good for specifying fuse bytes and + eliminates the need to create single-byte files or using + interactive terminal mode for these single-byte memories. + Requested by several folks on the mailing list. + +2003-04-18 Theodore A. Roth <troth@openavr.org> + + * configure.ac: Add cvs suffix back to version. + * doc/TODO: Add a few items. + +2003-04-18 Theodore A. Roth <troth@openavr.org> + + * AVRDUDE 4.1.0 has been released (cvs release tag is "release_4_1_0"). + +2003-04-17 Theodore A. Roth <troth@openavr.org> + + * configure.ac: Set version to 4.1.0. + * doc/avrdude.texi: Add note about avr910 programmer type. + +2003-04-17 Eric B. Weddington <eric@ecentral.com> + + * NEWS: Replace TBD with new release version. + +2003-04-17 Eric B. Weddington <eric@ecentral.com> + + * avrdude.conf.in: Change name of pony programmer to pony-stk200 + to better describe the hardware (PonyProg is software that works + with various hardware). + +2003-04-16 Eric B. Weddington <eric@ecentral.com> + + * avrdude.conf.in: Add support for ATtiny26 + Submitted by Artur Lipowski <LAL@pro.onet.pl> + * NEWS: List new devices supported: ATtiny26 + +2003-04-16 Eric B. Weddington <eric@ecentral.com> + + * avrdude.conf.in: Add support for ATmega8535 + Submitted by Alexander Peter <apeter@gmx.de> + * NEWS: List new devices supported: ATmega8535 + +2003-04-09 Theodore A. Roth <troth@openavr.org> + + * avr910.c: Reading a 16 bit word in paged load needs to swap the + bytes since the 'R' command returns MSB first and the internal buffer + stores LSB first. + +2003-04-07 Theodore A. Roth <troth@openavr.org> + + * stk500.c: Don't print out read/write byte progress unless the verbose + option is given. + +2003-04-05 Theodore A. Roth <troth@openavr.org> + + * avr910.c: Re-add the avr910 byte read/write methods which were + removed in my previous patch. Terminal mode read/writes are broken + without those methods. D'oh! + +2003-04-05 Theodore A. Roth <troth@openavr.org> + + * avr910.c: Refactor to allow probing for auto addr increment. If auto + incr supported by programmer hw, don't send addr for every byte. + +2003-04-03 Eric B. Weddington <eric@ecentral.com> + + * confwin.c: Fix bug that allows garbage for non-existent user + config filename on Windows. + +2003-03-29 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.conf.in: + Add the ATmega32 part. This part definition was contributed by: + Daniel Williamson <dannyw@maconmgt.co.uk> and + Ruwan Jayanetti <rjayanetti@sri.crossvue.com> + The resulting part definition used was actually somewhat of a merge of + the two submitted definitions. + +2003-03-24 Theodore A. Roth <troth@openavr.org> + + * NEWS: Add note about avr910 support. + +2003-03-23 Theodore A. Roth <troth@openavr.org> + + * avr.c (avr_write): Add call to pgm->write_setup() before the write + loop. + * avr910.c: Change all show_func_info() calls to no_show_func_info(). + Add read/write to/from flash/eeprom memory functionality. + * pgm.c: Initialize pgm->write_setup. + * pgm.h: Add write_setup field to PROGRAMMER structure. + * ser_posix.c: Remove unneeded cast in verbosity code. + +2003-03-23 Theodore A. Roth <troth@openavr.org> + + * ser_posix.c: Limit verbose output to 2 chars. + +2003-03-23 Theodore A. Roth <troth@openavr.org> + + * ser_posix.c: Add verbose level > 3 output for send and recv functions. + +2003-03-23 Theodore A. Roth <troth@openavr.org> + + * avr.c: Add avr_read_byte_default(). + Have avr_read_byte() call pgm->read_byte() or avr_read_byte_default(). + Add avr_write_byte_default(). + Have avr_write_byte() call pgm->write_byte or avr_write_byte_default(). + * pgm.c: Initialize pgm->write_byte and pgm->read_byte. + * pgm.h: Add write_byte and read_byte fields to struct programmer_t. + +2003-03-17 Theodore A. Roth <troth@openavr.org> + + * avrdude.conf.in: Fix typo for devicecode deprecation comment. + +2003-03-17 Eric B. Weddington <eric@ecentral.com> + + * avrdude.conf.in: Add Bascom SAMPLE programmer. + Submitted by Larry Barello <larryba@barrello.net> + +2003-03-16 Theodore A. Roth <troth@openavr.org> + + * avr.c (avr_read): Use pgm->read_sig_bytes to read signature bytes if + available. + * avr910.c (avr910_vfy_cmd_sent): New function. + (avr910_chip_erase): Add support for chip erase. + (avr910_enter_prog_mode): New function. + (avr910_leave_prog_mode): New function. + (avr910_initialize): Add code to select device type and enter prog mode. + (avr910_close): Leave programming mode before closing serial port. + (avr910_read_sig_bytes): New function. + (avr910_initpgm): Add avr910_read_sig_bytes method to pgm initializer. + * avrdude.conf.in: Add note about deprecating devicecode. + Change all occurences of devicecode to stk500_devcode. + Add avr910_devcode to a few parts for testing. + * avrpart.h (struct avrpart): Change devicecode field to stk500_devcode. + (struct avrpart): Add avr910_devcode field. + * config_gram.y: Add K_STK500_DEVCODE and K_AVR910_DEVCODE tokens. + Generate an error if devicecode is found in the config file. + Handle parsing of avr910_devcode and stk500_devcode. + * lexer.l: Handle parsing of avr910_devcode and stk500_devcode. + * pgm.c: Initialize pgm->read_sig_bytes field. + * pgm.h: Add pgm->read_sig_bytes field. + * stk500.c: Use stk500_devcode instead of devicecode. + +2003-03-16 Theodore A. Roth <troth@openavr.org> + + * avrdude.conf.in: Add avr910 and pavr programmers. + * config_gram.y: Add parsing of avr910 programmer. + * lexer.l: Add avr910 token. + * avr910.c: [this is still work in progress] + Add some debug output. + Add probe for programmer presense. + * main.c: Set port to default_serial if programmer type is avr910. + +2003-03-13 Theodore A. Roth <troth@openavr.org> + + * ser_posix.c, ser_win32.c, serial.h: + Change baud from int to long to avoid a 16-bit int overflow. + +2003-03-12 Theodore A. Roth <troth@openavr.org> + + * Makefile.am (avrdude_SOURCES): Add avr910.[ch], serial.h and + ser_posix.c files. + * avr910.c: New file (stubs for avr910 serial programmer). + * avr910.h: New file. + * ser_posix.c: New file. + * ser_win32.c: New file (just stubs for now). + * serial.h: New file. + * stk500.c: Move all the code for accessing the posix serial ports + into ser_posix. This will make a native win32 port easier and allows + the avr910 programmer to share the serial code. + +2003-03-12 Theodore A. Roth <troth@openavr.org> + + * configure.ac (AC_INIT): Set version to 4.0.0cvs since we're done + with 4.0.0 release. + +2003-03-12 + + * AVRDUDE 4.0.0 has been released (cvs release tag is "release_4_0_0"). + +2003-03-11 Theodore A. Roth <troth@openavr.org> + + * Makefile.am: Add CLEANFILES to remove all files from a make. + * doc/Makefile.am: Ditto + +2003-03-11 Theodore A. Roth <troth@openavr.org> + + * windows/Makefile.am: Fix uninstall-local rule (forget the $$file + part of the rm command). + +2003-03-11 Theodore A. Roth <troth@openavr.org> + + * AUTHORS: Updated. + * CHANGELOG: Move contents to NEWS and remove file. + * ChangeLog: All of the changes for this year. + * ChangeLog-2001: All 2001 changes. + * ChangeLog-2002: All 2002 changes. + * Makefile.am (EXTRA_DIST): Remove CHANGELOG and and Change-200[12]. + * NEWS: Moved contents of CHANGELOG file here. + * README: Add note pointing to savannah site. + +2003-03-11 Eric Weddington <eric@ecentral.com> + + * doc/avrdude.texi: + Add Install and Documentation sections for Windows. Fix typo. + +2003-03-10 Theodore A. Roth <troth@openavr.org> + + * Makefile.am: * Makefile.am (EXTRA_DIST): Add CHANGELOG. + +2003-03-10 Brian S. Dean <bsd@bsdhome.com> + + * stk500.c: Disable debugging printf. + + * configure.ac: Update version number in preparation for release. + +2003-03-10 Theodore A. Roth <troth@openavr.org> + + * doc/avrdude.texi: + Add comment before each node to make them stand out better. + Use @option{} command for options instead of @code{}. + Merge FreeBSD and Linux platform dependent information. + +2003-03-10 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.1: Minor man page updates to better reflect reality. + +2003-03-10 Joerg Wunsch <j@uriah.heep.sax.de> + + * bootstrap: + Export all the AUTO* variables. Hopefully, that way the generated + Makefile might get them correctly. + + * bootstrap: + Export ${AUTOCONF} so automake will find it by whatever name it will be + called today. + +2003-03-06 Eric Weddington <eric@ecentral.com> + + * doc/avrdude.texi: + Add notes about ability to list parts and list programmers in the + config file in -p and -c descriptions. Change info about where to + find Windows search method in -C description. + + * main.c: + Change software version from hardcoded value to getting it from + the configuration. + +2003-03-06 Theodore A. Roth <troth@openavr.org> + + * avrdude.spec.in: * avrdude.spec.in: Add docs sub-package. + Add %post and %preun scriptlets for handling info files. + + * configure.ac, doc/Makefile.am: + * configure.ac: Add --enable-versioned-doc option and set DOC_INST_DIR. + * doc/Makefile.am: Add rules to install docs in DOC_INST_DIR. + + * doc/Makefile.am: + Delete the lines which where commented out in previous commit. + + * configure.ac, doc/Makefile.am: + * configure.ac: Remove hack to make work with automake-1.5. + * doc/Makefile.am: Remove extra rules that were needed to work with + automake-1.5. + + * bootstrap: + * bootstrap: Force use of autoconf-2.57 and automake-1.7.x. + +2003-03-05 Joerg Wunsch <j@uriah.heep.sax.de> + + * avrdude.conf.in: Add a definition for the popular Ponyprog dongle. + + Submitted by: Daniel Williamson <dannyw@maconmgt.co.uk> + +2003-03-05 Brian S. Dean <bsd@bsdhome.com> + + * main.c: + Check the programmer type against 'STK500' instead of the programmer + name when checking to see if we should default to the default_serial + port instead of the default_parallel port. This has us do the right + thing for the new 'avrisp' programmer. + + * stk500.c: + Make the page size used for non-paged parts for the 'paged_write' + command be 128 bytes. This cuts 6 seconds off the programming time + for uploading a 6K file into an AT90S8515 vs the time loading the same + file using a 16 byte buffer, and the response feedback is still good. + + * avr.c, stk500.c: + Fix stk500 page write (Program Page command). This is supported after + all on non-paged-memory parts. The problem was that the page size was + defaulting to 256 (maximum for the stk500), but the timeout for a + response from the stk500 before declaring it dead was only 0.5 + seconds. But it takes much longer than 0.5 seconds to program 256 + bytes, so we just weren't waiting long enough. + + Fix this in two ways - increase the timeout to 5 seconds, and decrease + the page size to 16 bytes for non-paged parts. The programming time + for 16 bytes is short enough to provide the user with some feedback + that something is happening. + + * avr.c, stk500.c: + Don't call the programmer's 'paged_write' routine unless the memory + itself is paged as it doesn't appear to work otherwise. + + * avrdude.conf.in: Fix device codes for at90s8515 and at90s8535. + + * avrdude.conf.in: + Add PAGEL and BS2 parms for parts I have datasheets for. + + * config_gram.y: + Do that last commit slightly differently - this way results in no + shift-reduce conflicts. + + * config_gram.y: + It shouldn't be an error to have an empty configuration file. This + causes some shift-reduce conflicts, but I think they are OK. + + * main.c: + Print out a list of valid parts for '-p ?' and a list of valid + programmers for '-c ?'. + +2003-03-04 Eric Weddington <eric@ecentral.com> + + * doc/avrdude.texi: Minor Windows doc corrections. + + * doc/TODO: Add TODO file. + + * avrdude.conf.in: Add AVR ISP programmer. + +2003-03-04 Brian S. Dean <bsd@bsdhome.com> + + * stk500.c: + Don't try to set extended device programming parameters if they + haven't been specified in the config file for the part. + + * stk500.c: Set extended device parameters for all firmware versions. + + * stk500.c: + First attempt at supporting STK500 firmware past 1.10. Thanks to + Jason Kyle for the needed protocol information. + +2003-03-03 Theodore A. Roth <troth@openavr.org> + + * doc/Makefile.am: + * doc/Makefile.am: Add ps and pdf rules since they aren't supplied by + automake versions prior to 1.7. + + * doc/avrdude.texi: + * doc/avrdude.texi: Add node and menu information for the info system. + + * Makefile.am, configure.ac, doc/Makefile.am, doc/avrdude.texi: + * Makefile.am (SUBDIRS): Add doc dir. + * configure.ac (AC_CONFIG_FILES): Add doc/Makefile. + * doc/Makefile.am: New file. + * doc/avrdude.texi: Use automatically generated version.texi. + +2003-03-02 Brian S. Dean <bsd@bsdhome.com> + + * doc/avrdude.texi: Initial manual. + +2003-02-27 Theodore A. Roth <troth@openavr.org> + + * term.c: * term.c: Use fgets() if readline() is not available. + +2003-02-27 Joerg Wunsch <j@uriah.heep.sax.de> + + * bootstrap: + Oops, accidentally spammed the repository with my private version of + "bootstrap". Back out that change. + + * bootstrap, lexer.l: + Ignore \r as white space, to make the Windows people happy. + +2003-02-27 Theodore A. Roth <troth@openavr.org> + + * Makefile.am (EXTRA_DIST): Add avrdude.spec and make entries one + per line so future patches are obvious as to what changed. + * avrdude.spec.in: New file to support creation of binaries in rpm + format. + * configure.ac (AC_OUTPUT): Add avrdude.spec. Reorder so that + Makefile is the last entry. + +2003-02-26 Theodore A. Roth <troth@openavr.org> + + * Makefile.am (SUBDIRS): Add windows dir. + * configure.ac: If $target is a windows system, build whats in + windows sub dir. + * windows/Makefile.am: New file. + +2003-02-25 Theodore A. Roth <troth@openavr.org> + + * ChangeLog: Point reader to the CHANGELOG file. + * Makefile.am (EXTRA_DIST): Rename avrdude.conf.sample to + avrdude.conf.in. + Remove avrdude.conf and distclean-local rules. + Add install-exec-local and backup-avrdude-conf rules. + * avrdude.conf.in: + Set default_parallel to "@DEFAULT_PAR_PORT@" for autoconf expansion. + Set default_serial to "@DEFAULT_SER_PORT@" for autoconf expansion. + * configure.ac: Add call to AC_CANONICAL_{BUILD,HOST,TARGET} macros. + Set DEFAULT_PAR_PORT and DEFAULT_SER_PORT based on $host. + Add copyright header. + Define avrdude_version so AC_INIT and AM_INIT_AUTOMAKE are sure + to get the same version. + + * avrdude.conf.in, avrdude.conf.sample: + Renamed avrdude.conf.sample to avrdude.conf.in. + +2003-02-25 Eric Weddington <eric@ecentral.com> + + * ppiwin.c: CRs again. + + * confwin.c, confwin.h: Get rid of CRs. + + * main.c, Makefile.am: Get rid of CRs again. + +2003-02-24 Joerg Wunsch <j@uriah.heep.sax.de> + + * avrdude.1: Atmel has rearranged their web site, so now the AVR + docs have been moved to a more logically sounding URL. + +2003-02-24 Eric Weddington <eric@ecentral.com> + + * Makefile.am, main.c: Integrate Windows search of config files. + + * confwin.c, confwin.h: config file search on Windows. + + * ppiwin.c: Change port value from lpt1alt to lpt3. Other + formatting changes. + + * windows/giveio.c: + Add giveio device driver source. Requires MS DDK to build. + + * windows/giveio.sys: Add giveio device driver binary. + + * giveio.sys, install_giveio.bat, remove_giveio.bat, status_giveio.bat: + Move Windows specific files. + + * windows/loaddrv.c, windows/loaddrv.h, windows/remove_giveio.bat: + * windows/status_giveio.bat, windows/install_giveio.bat: + Add Windows specific files. + + * main.c: Usage back to stderr. + +2003-02-22 Brian S. Dean <bsd@bsdhome.com> + + * CHANGELOG: Add note about .avrduderc. + + * avr.c, avrdude.conf.sample, avrpart.h, config_gram.y, main.c, + * par.c, pgm.c, pgm.h: + Add the ability to read a per-user config file located at + $HOME/.avrduderc. Entries from .avrduderc take precedence over those + from the system wide config file in ${PREFIX}/etc/avrdude.conf. + + Track and display the config file name and line number when we print + out the available parts and programmers. This is useful in case + someone has overridden a definition in their .avrduderc file and is + wondering why the definition in the system wide config file is not + being used. + + Remove the default programmer 'stk500' from the distributed config + file. + + * CHANGELOG: Spelling. + +2003-02-21 Brian S. Dean <bsd@bsdhome.com> + + * CHANGELOG: + Put some stuff in the CHANGELOG for this upcoming new version before I + forget. + + * main.c: + Update comment due to removal of the default parallel port pin config. + + * config.c, config.h, config_gram.y, lexer.l, main.c: + * avrdude.conf.sample: + Introduce 'default_programmer' to the config file instead of requiring + one of the programmers to be tagged "default" within its definition. + + Also, axe the notion of a compiled-in default programmer. It is + kind've pointless now that nearly all configuration comes from the + config file, thus, avrdude is not very useful without the config file, + and thus, having a programmer compiled-in offers little or no benefit. + +2003-02-21 Eric Weddington <eric@ecentral.com> + + * main.c: Change usage text to be verbose. + + * giveio.sys: Add Windows parallel port device driver (binary). + + * install_giveio.bat, remove_giveio.bat, status_giveio.bat: + Windows batch files to work with giveio.sys. + +2003-02-21 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.conf.sample, config.c, config.h, config_gram.y, lexer.l: + * main.c: + Add port name defaults to the config file instead of hard-coding. + This adds 'default_parallel' and 'default_serial' keywords to the + grammar, which take quoted string arguments. + + * avrdude.conf.sample: + Document the recent additions to the config file. + + * stk500.c, avr.c, avrpart.h, config_gram.y, lexer.l, par.c: + Add the ability to specify which pin to pulse when retrying entry into + programming mode. Use 'retry_pulse' in the per-part specification + that can currently take values of 'reset' or 'sck', the default being + 'sck' which preserves the previous behaviour. Some newer parts + indicate that /RESET should be pulsed, while older parts say to pulse + SCK. + +2003-02-20 Eric Weddington <eric@ecentral.com> + + * main.c, par.c: + Make verbose global. Make debug code in par_cmd() based on verbose=2. + +2003-02-20 Brian S. Dean <bsd@bsdhome.com> + + * stk500.c: Fix pseudo/full parallel mode selection logic. + + * avrdude.conf.sample: + Woops, didn't really mean to commit those changes that slipped in with + the last commit. Those were just there for testing. + + * avr.c, avrdude.conf.sample, avrpart.h, config_gram.y, lexer.l: + * stk500.c: + Add 'serial' and 'parallel' keywords to the grammar so that one can + say whether parts support these programming modes or not. Possible + values for 'serial' are 'yes' or 'no'. Possible values for 'parallel' + are 'yes', 'no', or 'pseudo'. Add a bit mask of flags to the AVRPART + structure to capture these settings. Use these within + stk500_initialize() to set the device parameters correctly. + + Defaults for 'serial' and 'parallel' are 'yes' unless specified + otherwise. + +2003-02-20 Eric Weddington <eric@ecentral.com> + + * Makefile.am, ppiwin.c: Get rid of CRs. + + * Makefile.am: Add ppiwin.c to avrdude_SOURCES. + + * ppiwin.c: Added ppiwin.c: Windows parallel port driver. + + * stk500.c: + Add error message for fail to enter programming mode. Fix typos. + +2003-02-20 Brian S. Dean <bsd@bsdhome.com> + + * avr.c, avrdude.conf.sample, avrpart.h, config_gram.y, lexer.l: + Add a few parameters needed for parallel programming: assignment of + PAGEL and BS2 signals and the disposition of the reset pin + ('dedicated' or 'io'). + +2003-02-20 Theodore A. Roth <troth@openavr.org> + + * avrdude.1: Fix spacing for m169 entry. (tabs not spaces ;-) + +2003-02-20 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.1, fileio.c, main.c: Add Motorola S-record support. + + Submitted by: "Alexey V.Levdikov" <tsar@kemford.com> + +2003-02-19 Theodore A. Roth <troth@openavr.org> + + * avrdude.1: Add m169 to list of supported targets. + +2003-02-19 Joerg Wunsch <j@uriah.heep.sax.de> + + * avrdude.conf.sample, avrdude.1: + My colleague contributed a part definition for the AT90S2343. + + Submitted by: Mirko Kaffka <mirko@mkaffka.de> + +2003-02-18 Theodore A. Roth <troth@openavr.org> + + * avrdude.conf.sample: + Add support for mega169. (tested with stk500 with 1.7 firmware) + + * avrdude.conf.sample: + Add commments to separate parts (makes it easier for the eye to parse). + +2003-02-15 Theodore A. Roth <troth@openavr.org> + + * Makefile.am: Add $srcdir to sample config filename so that + building in a separate dir works. + +2003-02-15 Joerg Wunsch <j@uriah.heep.sax.de> + + * Makefile.am: + Only GNU make sets $< in non-inference rules, so rather explicitly + spell the source file(s) to remain compatible. + +2003-02-14 Theodore A. Roth <troth@openavr.org> + + * Makefile.am: Add distclean rule and EXTRA_DIST list to get 'make + distcheck' to succeed. + + These changes add basic support for a autoconf/automake based + build system. + + * .cvsignore: Ignore autoconf files. + * AUTHORS: New file. + * ChangeLog: New file. + * Makefile: Removed file. + * Makefile.am: New file. + * NEWS: New file. + * README: New file. + * bootstrap: New file. + * configure.ac: New file. + * avr.c: Include ac_cfg.h (generated by autoconf). + * config.c: Include ac_cfg.h. + Include config_gram.h instead of y.tab.h. + * config.h: If HAS_YYSTYPE is not defined, define YYSTYPE. + * config_gram.y: Include ac_cfg.h. + * fileio.c: Include ac_cfg.h. + * lexer.l: Include config_gram.h instead of y.tab.h. + * lists.c: Include ac_cfg.h. + * main.c: Include ac_cfg.h. + * par.c: Include ac_cfg.h. + * pgm.c: Include ac_cfg.h. + * ppi.c: Include ac_cfg.h. + * stk500.c: Include ac_cfg.h. + * term.c: Include ac_cfg.h. + +2003-02-14 Brian S. Dean <bsd@bsdhome.com> + + * stk500.c: Fix typos. Fix error messages. + +2003-02-13 Brian S. Dean <bsd@bsdhome.com> + + * Makefile, avrdude.conf.sample, config_gram.y, lexer.l, main.c: + * par.c, par.h, ppi.c, ppi.h, stk500.c: + Split higher level parallel port programmer code off from ppi.c into + its own file par.c, leaving low level parallel port accessor routines + in ppi.c to help with portability. Change the programmer type to + 'PAR' now instead of 'PPI' - 'PAR' represents the parallel port + programmer type. + + Be more liberal with 'static' function declarations within the + programmer implimentation files - these functions should never be + called directly - always use the programmer function references. + + There are still a few places in 'main.c' that directly reference the + parallel programmer explicitly (par_getpinmask). These should be + fixed somehow. + + Axe a few unused functions. + +2003-02-12 Theodore A. Roth <troth@openavr.org> + + * .cvsignore: New file. + + * stk500.c: Remove need for inttypes.h. + + * lexer.l: Define YY_NO_UNPUT to quell a compiler warning. + + * Makefile: Remove YACC assignment. + Add '-b y' options to YACC invocation. + Remove leading '-' from 'include .depend'. + +2003-02-12 Joerg Wunsch <j@uriah.heep.sax.de> + + * config_gram.y: + Declare the internally used static functions on top, to get rid of the + compiler warnings. + + Reported by: bison-generated parsers + +2003-02-11 Theodore A. Roth <troth@openavr.org> + + * linux_ppdev.h: New file. + * ppi.c: Include system dependant parallel port interface file. + (ppi_open): Add call to ppi_claim(). + (ppi_close): Add call to ppi_release(). + * ppi.h: Define ppi_claim() and ppi_release() as NOPs if not previously + defined. + * stk500.c: Include inttypes header to quell compiler warning. + +2003-02-11 Joerg Wunsch <j@uriah.heep.sax.de> + + * pgm.c, ppi.c, stk500.c: Fix some implicit declaration warnings. + + * config_gram.y: + Move the C declarations to the top of the file. While [b]yacc doesn't + care, bison does, and this is normally the way it's meant to be + anyway. + +2003-02-11 Theodore A. Roth <troth@openavr.org> + + * Makefile: Generate dependencies specific to the target system. + Explicitly use byacc. + + * Makefile: + Remove reference to avr-gcc in depend rule (cut & paste error). + +2003-02-09 Brian S. Dean <bsd@bsdhome.com> + + * main.c, pgm.c, pgm.h, pindefs.h, ppi.c, ppi.h, stk500.c: + * stk500.h, stk500_private.h, term.c, term.h, CHANGELOG, COPYING: + * Makefile, avr.c, avr.h, avrdude.1, avrdude.conf.sample: + * avrdude.pdf, avrpart.h, config.c, config.h, config_gram.y: + * fileio.c, fileio.h, lexer.l, lists.c, lists.h: + Test commit in new public repository. Before this time this repo + existed on a private system. Commits made by 'bsd' on the old system + were made by Brian Dean (bdean on the current system). + +2003-02-08 Brian S. Dean <bsd@bsdhome.com> + + * Makefile, avr.c, avr.h, avrdude.1, avrpart.h, config.c, + * config.h, config_gram.y, fileio.c, fileio.h, lexer.l, lists.c: + * lists.h, main.c, pgm.c, pgm.h, pindefs.h, ppi.c, ppi.h: + * stk500.c, stk500.h, term.c, term.h: + The last part of that last commit message should read: + + All others - modify program description. + + * Makefile, avr.c, avr.h, avrdude.1, avrpart.h, config.c: + * config.h, config_gram.y, fileio.c, fileio.h, lexer.l, lists.c: + * lists.h, main.c, pgm.c, pgm.h, pindefs.h, ppi.c, ppi.h: + * stk500.c, stk500.h, term.c, term.h: + Makefile: include a target to automatically generate the dependency + list. + + All others + +2003-02-06 Brian S. Dean <bsd@bsdhome.com> + + * avrdude.1: Update license to GPL, permission by Joerg Wunsch. + + * lexer.l: Add GPL. + + * Makefile, config_gram.y: Add GPL to the Makefile and config_gram.y. + + * Makefile, stk500.h: + Add stk500.h as a dependency for stk500.c. Remove carraige returns + from stk500.h - don't know how those got in there (pointed out by Ted + Roth). + + * COPYING, avr.c, avr.h, avrpart.h, config.c, config.h, fileio.c: + * fileio.h, lists.c, lists.h, main.c, pgm.c, pgm.h, pindefs.h: + * ppi.c, ppi.h, stk500.c, stk500.h, term.c, term.h: + Re-license using the GNU GPL. Thanks to Ted Roth for the patch. + + * avr.c, avr.h, config.c, config.h, config_gram.y, fileio.c: + * fileio.h, lexer.l, lists.c, lists.h, main.c, pgm.c, pgm.h: + * pindefs.h, ppi.c, ppi.h, stk500.c, stk500.h, term.c, term.h: + Get rid of the verbose printing of individual file CVS version ids. + This was intended to be used for identifying code in the field for + incoming bug reports, but I've never really found it all that useful. + + * CHANGELOG, Makefile, Makefile.inc, avr.c, avrdude.1: + * avrdude.conf.sample, config_gram.y, lexer.l, main.c, stk500.c: + * term.c: + Change the name from AVRPROG to AVRDUDE. + + This change represents a name change only. There is currently an + effort to port AVRPROG to other platforms including Linux and Windows. + Since Atmel's programmer binary that's included within their AVR + Studio software is named AVRPROG.EXE on the Windows OS, there is the + chance for confusion if we keep calling this program AVRPROG as well. + Up until now the name hasn't really been a problem since there was no + chance to confuse 'avrprog' on Unix with Atmel's AVRPROG because + Atmel's tools only run on Windows. But with the Unix 'avrprog' + possibly being ported to Windows, I felt a name change was the best + way to avoid problems. + + So - from this point forward, my FreeBSD Unix program formerly + known as AVRPROG will subsequently be known as AVRDUDE (AVR + Downloader/UploaDEr). + + This change also represents a time when the AVRDUDE sources move from + my own private repository to a public repository. This will give + other developers a chance to port AVRDUDE to other platforms and + extend its functionality to support additional programming hardware, + etc. + + So goodbye AVRPROG, welcome AVRDUDE! |