diff options
Diffstat (limited to 'src/avrdude/ChangeLog-2008')
-rw-r--r-- | src/avrdude/ChangeLog-2008 | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/src/avrdude/ChangeLog-2008 b/src/avrdude/ChangeLog-2008 new file mode 100644 index 000000000..f43a10abb --- /dev/null +++ b/src/avrdude/ChangeLog-2008 @@ -0,0 +1,185 @@ +2008-11-20 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * avrdude.h: Change the prototype for usleep() to be more Cygwin- + friendly. + * ppiwin.c: (Ditto.) + +2008-11-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by limor <limor@ladyada.net> + * usbtiny.c (usbtiny_cmd): Replace sizeof() by a fixed constant + 4 for the result array, because otherwise it would take the size + of a pointer which miserably fails on 64-bit machines. + +2008-11-05 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + patch #6609: Using PCI parallel port cards on Windows + * ppiwin.c (ppi_open): If the port parameter passed from the + -p option is neither lpt1/2/3, try interpreting it directly as + a base address. + * avrdude.1: Document the change. + * doc/avrdude.texi: (Ditto.) + +2008-11-04 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #22882: Erase Cycle Counter does not work for stk500v2 + * stk500v2.c (stk500v2_chip_erase,stk500hv_chip_erase): Return + the expected 0 for success rather than a protocol-dependant + number. + +2008-11-04 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #22883: Chip Erase performed even with no-write flag (-n) + * main.c: Do not erase the chip if both, -e and -n options have + been specified. + +2008-11-04 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #24589: AT90USB64* have wrong signature + * avrdude.conf.in: Uncomment the correct, and delete the wrong + signature for AT90USB646/647. Alas, the datasheet has never been + corrected for years. + +2008-10-31 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtagmkII.c: Fix a serious memory corruption that happened when + using the JTAG ICE mkII (or AVR Dragon) in ISP mode. The wrong + set of per-programmer private data had been allocated (stk500v2 + vs. jtagmkII) which was too small to hold the actual data. + * jtagmkII.h: (Ditto.) + * stk500v2.c: (Ditto.) + +2008-07-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtagmkII.c: Implement Xmega JTAG support. + * jtagmkII_private.h: Add EMULATOR_MODE_JTAG_XMEGA. + +2008-07-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * main.c: Remember whether the device initialization worked, and + allow to continue with -F if it failed yet do not attempt to + perform anything on the device itself. That way, -tF could be + specified for programmers like the STK500/STK600 even without a + device connected, just in order to allow changing parameters on + the programmer itself. + * avrdude.1: Document that possible use of the -F option. + * doc/avrdude.texi: (Ditto.) + +2008-07-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * stk500v2.c (stk600_xprog_paged_write): Fix a fatal miscalculation + of the number of bytes to be written which caused a malloc chunk + corruption. + +2008-07-27 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + First implementation of ATxmega support. By now, only the + PDI mode of the STK600 is supported. Single-byte EEPROM + (and flash) updates do not work yet. + * avr.c: "boot" memory is a candidate memory region for paged + operations, besides "flash" and "eeprom". + * avrdude.conf.in: add ATxmega128A1 and ATxmega128A1revD + * avrpart.h: add the AVRPART_HAS_PDI flag (used to distinguish + ATxmega parts from classic AVRs), the nvm_base part field, and + the offset field for a memory region. + * config_gram.y: add "has_pdi", "nvm_base", and "offset" + * lexer.l: (Ditto.) + * main.c: disable auto_erase for ATxmega parts + * stk500v2.c: implement the XPROG functionality, and divert to + this for ATxmega parts + * avrdude.1: Document the changes. + * doc/avrdude.texi: (Ditto.) + +2008-07-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Fix a bunch of warnings. + * avr910.c (avr910_paged_load): possible unitialized use of + rd_size + * jtagmkI.c (jtagmkI_initialize): pointer signedness mixup + * jtagmkII.c (jtagmkII_print_parms1): propagate const'ness + of parameter + * usbasp.c (usbasp_transmit): pointer signedness mixup + * ser_avrdoper.c (usbGetReport): remove useless pointer deref + +2008-07-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Contributed by Ville Voipio: + patch #6501: New autotools support for avrdude + * Makefile.am: add @WINDOWS_DIRS@ to SUBDIR + * bootstrap: allow for autconf-2.61 and automake-1.10, too + * configure.ac: fix @WINDOWS_DIRS@ recursion, replace + AC_PROG_CC by AM_PROG_CC_C_O, for esoteric reasons + +2008-06-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Contributed by Janos Sallai <janos.sallai@vanderbilt.edu>: + patch #6074: added support for crossbow's MIB510 programmer + * avrdude.conf.in: Add entry for mib510. + * stk500.c: Add special hooks to handle the MIB510 programmer. + It mostly talks STK500v1 protocol but has a special hello and + goodbye sequence, and uses a fixed block size of 256 bytes. + * doc/avrdude.texi: Document support for mib510. + +2008-06-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Contributed by Klaus Leidinger <klaus@mikrocontroller-projekte.de>: + * main.c: Realign verbose messages. + * avrpart.c: (Ditto.) + * avr910.c: Print the device code selected in verbose mode. + * butterfly.c: (Ditto.) + +2008-06-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Contributed by Klaus Leidinger <klaus@mikrocontroller-projekte.de>: + Add check for buffermode feature, and use it if present. Can be + turned off using -x no_blockmode. + * avr910.c: Implement buffermode test and usage. + * avrdude.1: Document -x no_blockmode. + * doc/avrdude.texi: (Ditto.) + +2008-03-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * usb_libusb.c: #undef interface for Win32 + +2008-03-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * avr910.c: Add support for the -x devcode option. + * avrdude.1: Document -x devcode for avr910. + * doc/avrdude.texi: (Ditto.) + +2008-03-14 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Add initial support for the Atmel STK600, for + "classic" AVRs (AT90, ATtiny, ATmega) in both, + ISP and high-voltage programming modes. + * Makefile.am: Add -lm. + * avrdude.conf.in: Add stk600, stk600pp, and stk600hvsp. + * config_gram.y: Add support for the stk600* keywords. + * lexer.l: (Ditto.) + * pgm.h: Add the "chan" parameter to set_varef(). + * stk500.c: (Ditto.) + * serial.h: Add USB endpoint support to struct filedescriptor. + * stk500v2.c: Implement the meat of the STK600 support. + * stk500v2.h: Add new prototypes for stk600*() programmers. + * stk500v2_private.h: Add new constants used in the STK600. + * term.c: Add AREF channel support. + * usb_libusb.c: Automatically determine the correct write + endpoint ID, the STK600 uses 0x83 while all other tools use + 0x82. Propagate the EP to use through struct filedescriptor. + * usbdevs.h: Add the STK600 USB product ID. + * tools/get-stk600-cards.xsl: XSL transformation for + targetboards.xml to obtain the list of socket and routing + card IDs, to be used in stk500v2.c (for displaying the + names). + * tools/get-stk600-devices.xsl: XSL transformation for + targetboards.xml to obtain the table of socket/routing cards + and their respective AVR device support for doc/avrdude.texi. + * avrdude.1: Document all the STK600 stuff. + * doc/avrdude.texi: Ditto. Added a new chapter for + Programmer Specific Information. + +2008-01-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * stk500v2.c (stk500v2_recv): Make length computation unsigned so + it cannot accidentally become negative. + |