diff options
Diffstat (limited to 'src/avrdude/ChangeLog-2013')
| -rw-r--r-- | src/avrdude/ChangeLog-2013 | 618 |
1 files changed, 618 insertions, 0 deletions
diff --git a/src/avrdude/ChangeLog-2013 b/src/avrdude/ChangeLog-2013 new file mode 100644 index 000000000..8e975ef6e --- /dev/null +++ b/src/avrdude/ChangeLog-2013 @@ -0,0 +1,618 @@ +2013-12-15 Nils Springob <nils@nicai-systems.de> + + * pgm.c/pgm.h: fixed syntax error in const pointer to const + +2013-12-05 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * configure.ac: bump version to 6.1-svn-20131205 + +2013-12-05 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #40817: Elf file support (possibly) not working on 6.0.1 windows build + * fileio.c (fileio): open file in binary mode also for FMT_ELF + +2013-12-04 Rene Liebscher <R.Liebscher@gmx.de> + + Rework of bitbanging functions setpin, getpin, highpulsepin to make simplier use + of new pindefs data in pgm structure + * linuxgpio.c, bitbang.c, buspirate.c, par.c, pgm.h, term.c, serbb_*.c: changed + interface of setpin, getpin, highpulsepin to take pin function as parameter + (not the real number, which can be found by pgm->pinno[function]) + +2013-11-30 Rene Liebscher <R.Liebscher@gmx.de> + + bug #40748 linuxgpio doesn't work on Raspberry PI rev. 2. + * linuxgpio.c: fixed check for unused pins to ignore the inverse flag + * pindefs.c: fixed fill_old_pinlist to not create an empty mask with inverse flag set + +2013-10-18 Nils Springob <nils@nicai-systems.de> + + * avrdude.conf.in (atmega1284): ATmega1284 variant added (same as ATmega1284p but with different signature) + +2013-09-25 Hannes Weisbach <hannes_weisbach@gmx.net> + + First part of patch #7720: + * avrdude.conf.in: Add UM232H and C232H programmers + +2013-09-22 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Daniel Rozsnyo: + bug #40085: Typo fix in fuses report (for 6.1-svn-20130917) + * main.c: Fix a typo. + +2013-09-19 Hannes Weisbach <hannes_weisbach@gmx.net> + + task #12798: Please cleanup #ifdef notyet entries in avrftdi.c + * avrftdi.c: ditto. + avrftdi.c: Remove DRYRUN-option. + +2013-09-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #40055: AVRDUDE segfaults when writing eeprom + * main.c: Always clear the UF_AUTO_ERASE flag if either a + non-Xmega device was found, or the programmer does not offer a + page_erase method. + +2013-09-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * configure.ac (AC_INIT): Bump version to post-6.0. + +2013-09-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * configure.ac (AC_INIT): Bump version to 6.0. + +2013-09-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtag3.c (jtag3_initialize): Fix a buffer overflow by limiting + the flash page cache size to at most "readsize". For Xmegas with + a page size of 512 bytes, the maximum USB packet size was + overflowed, and subsequently, a memmove copied beyond the end of + the allocated buffer. + * jtag3.c (jtag3_read_byte): Add the correct offset also for the + various flash regions, so reading the apptable or boot regions + yields the correct data. + +2013-09-16 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Joakim Lubeck: + bug #40040: Support for ATtiny20 and ATtiny40 + * avrdude.conf.in: Restructure the reduced-core tiny devices + to use a common entry .reduced_core_tiny; add ATtiny20 and + ATtiny40 + +2013-09-15 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Joakim Lubeck: + bug #40033: Support for the XMegaE5 family + * avrdude.conf.in (ATxmega8E5, ATxmega16E5, ATxmega32E5): New + entries. + +2013-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * stk500v2.c (stk500v2_set_sck_period): Revamp this to match the + description/pseudo-code in appnote AVR068. + +2013-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Stephen Roe: + patch #7710: usb_libusb: Check VID/PID before opening device + * usb_libusb.c (usbdev_open): Swap the sequence of verifying the + VID:PID, and opening the device. + +2013-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + patch #8176: butterfly.c (AVR109 protocol implementation) clean-up and bug-fixing + * butterfly.c (butterfly_page_erase): Add dummy function to avoid + segfault when writing to EEPROM. + +2013-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #35474 Feature request: print fuse values in safemode output + * config_gram.y: New configuration token "default_safemode". + * lexer.l: (Dito.) + * avrdude.conf.in: (Dito.) + * config.h: Add variable default_safemode. + * config.c: (Dito.) + * main.c: Handle default_safemode, including -u option. + * avrdude.1: Document all this. + * doc/avrdude.texi: (Dito.) + +2013-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by HubertB: + patch #7657 Add ATmega406 support for avrdude using DRAGON + JTAG + * avrdude.conf.in (ATmega406): New entry. + +2013-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Marc de Hoop: + patch #7606 ATtiny43u support + * avrdude.conf.in (ATtiny43U): New entry. + +2013-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + patch #5708 avrdude should make 10 synchronization attempts instead of just one + * stk500.c (stk500_getsync): Loop 10 times trying to get in + sync with the programmer. + +2013-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Contributed by Ricardo Martins: + bug #36384 ATxmega32A4 usersig size + * avrdude.conf.in: Revamp all the ATxmega* entries. Add new + entries for ATxmega128A1U, ATxmega128A3U, ATxmega128A4U, + ATxmega128B1, ATxmega128B3, ATxmega128C3, ATxmega128D3, + ATxmega16A4U, ATxmega16C4, ATxmega192A3U, ATxmega192C3, + ATxmega192D3, ATxmega256A3BU, ATxmega256A3U, ATxmega256C3, + ATxmega256D3, ATxmega32A4U, ATxmega32C4, ATxmega384C3, + ATxmega384D3, ATxmega64A1U, ATxmega64A3U, ATxmega64A4U, + ATxmega64B1, ATxmega64B3, ATxmega64C3, ATxmega64D3 + +2013-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #35456 The progress bar for STK500V2 programmer is "wrong". + * avr.c (avr_read, avr_write): Change the progress reporting for + paged read/write from per-address to per-considered-page. This + ought to give a realistic estimation about the time still to be + spent. + +2013-09-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #34277: avrdude reads wrong byte order if using avr911 (aka butterfly) + * butterfly.c (butterfly_read_byte_flash): Swap bytes received. + +2013-09-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #37768 Poll usbtiny 100 times at init time to handle low-clock devices + * doc/avrdude.texi: Add a FAQ entry about how to connect to a + target where the firmware has reduced the internal clock speed. + +2013-09-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #28344 chip_erase_delay too short for ATmega324P, 644, 644P, and 1284P + * avrdude.conf: Bump the chip_erase_delay for all ATmega*4 devices + to 55 ms. While the datasheet still claims 9 ms, all the XML files + tell either 45 or 55 ms, depending on STK600 or not. + +2013-09-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * fileio.c (fileio): Don't exit(1) if something goes wrong; return + -1 instead. Don't refer to obsolete option -f to specify the file + format. + +2013-09-10 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Matthias Trute: + bug #36901 flashing Atmega32U4 EEPROM produces garbage on chip + * avrdude.conf.in (ATmega32U4): Fix EEPROM pagesize to 4, the + datasheet is wrong here. + +2013-09-09 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * configure.ac: check for ar and ranlib in the target tool + namespace, rather than on the host. + +2013-09-08 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Fix byte-wise EEPROM and flash writes on Xmega + * jtagmkII_private.h (MTYPE_EEPROM_XMEGA): New memory type. + * jtagmkII.c (jtagmkII_write_byte): For Xmega EEPROM, use + memory type MTYPE_EEPROM_XMEGA; for flash writes, always + write 2 bytes starting on an even address. + +2013-09-08 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * term.c: Implement the "verbose" terminal mode command. + * avrdude.1: Document this. + * doc/avrdude.texi: (Dito.) + +2013-09-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtag3.c (jtag3_write_byte): Do not attempt to start the paged + algorithm for EEPROM when being connected through debugWIRE. + +2013-09-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Extend the single-byte algorithm to all devices, both flash and + EEPROM. (Flash cells must have been erased before though.) + * jtag3.c (jtag3_initialize): OCDEN no longer needs to be + considered; a session with "programming" purpose is sufficient + * jtag3.c (jtag3_write_byte): Use the paged algorithm for all + flash and EEPROM areas, not just Xmega. + +2013-09-05 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Fix single-byte EEPROM updates on Xmega: + * jtag3_private.h (MTYPE_EEPROM_XMEGA): New define. + * jtag3.c (jtag3_write_byte): When updating flash or + EEPROM on Xmega devices, resort to jtag3_paged_write() + after filling and modifying the page cache. + * jtag3.c (jtag3_paged_write): use MTYPE_EEPROM_XMEGA + where appropriate. + * jtag3.c (jtag3_initialize): Open with debugging intent + for Xmega devices, so single-byte EEPROM updates will + work. + +2013-09-04 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Matthias Neeracher: + bug #38732: Support for ATtiny1634 + * avrdude.conf.in (ATtiny1634): New entry. + +2013-09-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Brane Ždralo: + patch #7769: Write flash fails for AVR910 programmers + * avr910.c (avr910_paged_write): Fix flash addresses in + 'A' command. + +2013-09-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Fred (magister): + bug #38951: AVR109 use byte offset instead of word offset + patch #8045: AVR109 butterfly failing + * butterfly.c (butterfly_paged_load, butterfly_paged_write): + fix calculation of 'A' address when operating on flash memory. + It must be given in terms of 16-bit words rather than bytes. + +2013-09-03 Rene Liebscher <R.Liebscher@gmx.de> + + * avrftdi.c, avrftdi_private.h: added tx buffer size, and use + smaller block sizes as larger sometimes hang + +2013-09-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * avrdude.h: Remove the erase cycle counter (options -y / -Y). + * avr.c: (Dito.) + * main.c: (Dito.) + * avrdude.1: Undocument -y / -Y. + * doc/avrdude.texi: (Dito.) + +2013-09-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #39691 Buffer overrun when reading EEPROM byte with JTAGICE3 + * jtag3.c (jtag3_initialize): initialize the eeprom_pagesize + private attribute so the page cache will actually be usable + +2013-09-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #38580 Current svn head, xmega and fuses, all fuses tied to fuse0 + * jtag3.c (jtag3_read_byte, jtag3_write_byte): Correctly apply the + relevant part of mem->offset as the address to operate on. + +2013-09-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * fileio.c: Fix "unused variable" warnings. + * avr.c: (Dito.) + * stk500v2.c: (Dito.) + * stk500.c: (Dito.) + * jtagmkII.c: (Dito.) + * term.c: (Dito.) + * ser_posix.c: (Dito.) + +2013-09-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Travis Griggs: + bug #38307: Can't write usersig of an xmega256a3 + * stk500v2.c (stk600_xprog_page_erase): allow erasing the usersig space. + +2013-09-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Robert Niemi: + bug #35800: Compilation error on certain systems if parport is disabled + * linux_ppdev.h: Conditionalize inclusion of <linux/parport.h> and + <linux/ppdev.h> on HAVE_PARPORT + +2013-09-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #39794: warnings when building avrdude 6.0rc1 under CentOS 6.4 + * pickit.c (usb_open_device): Use %p rather than %X to print "handle" + which is a pointer + * jtag3.c (jtag3_initialize): Initialize "flashsize" to be sure it + proceeds with a valid value. + +2013-09-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #39794: warnings when building avrdude 6.0rc1 under CentOS 6.4 + * buspirate.c: Turn the "cmd" argument of the various methods into + a "const unsigned char *"; while doing this, declare all arrays being + passed as arguments to be pointers rather than arrays, as the latter + obfuscates the way arrays are being passed to a callee in C. + * avrftdi.c: (Dito.) + * pickit2.c: (Dito.) + * ft245r.c: (Dito.) + * avr910.c: (Dito.) + * stk500.c: (Dito.) + * bitbang.c: (Dito.) + * bitbang.h: (Dito.) + * avrftdi_tpi.c: (Dito.) + * avrftdi_tpi.h: (Dito.) + * usbasp.c: (Dito.) + * stk500v2.c: (Dito.) + * pgm.h: (Dito.) + * usbtiny.c: (Dito.) + +2013-09-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #38023: avrdude doesn't return an error code when attempting + to upload an invalid Intel HEX file + * fileio.c (ihex2b): Turn the "No end of file record found" warning + into an error if no valid record was found at all. + +2013-09-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Claus-Justus Heine: + bug #38713: Compilation of the documentation breaks with texinfo-5 + * doc/avrdude.texi: Turn @itemx into @item, add @headitem to STK600 + Routing/Socket card table + +2013-09-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * usbasp.c: Add trace output for -vvv to non-TPI functions, too. + +2013-09-01 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * usbasp.c (usbasp_tpi_paged_load): Calculate correct + buffer address. + * usbasp.c (usbasp_tpi_paged_write): Calculate correct + buffer address; don't issue a SECTION_ERASE command for + each page (a CHIP_ERASE has been done before anyway); + remove the code that attempted to handle partial page + writes, as all writes are now done with a full page. + +2013-09-01 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * usbasp.c: Add more trace output, by now only for the TPI + functions. + +2013-08-31 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * usbasp.c (usbasp_transmit): Add -vvvv trace output. + +2013-08-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #39893: Verification failure with AVRISPmkII and Xmega + * stk500v2.c (stk600_xprog_page_erase): Fix argument that is + passed to stk600_xprog_memtype() + +2013-07-11 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * fileio.c (elf2b): replace elf_getshstrndx() by + elf_getshdrstrndx() as the former one is deprecated + +2013-06-19 Rene Liebscher <R.Liebscher@gmx.de> + + use bitbanging on ftdi mpsse when wrong pins are used + * avrftdi.c, avrftdi_private.h: added additional pin check + and bitbanging fallback + * pindefs.[ch]: added a flag to enable/disable output + * ft245r.c: changes because of added flag above + +2013-05-17 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by "Malte" and John McCorquodale: + patch #7876 JTAGICE mkII fails to connect to attiny if debugwire + is enabled AND target has a very slow clock + * jtagmkII.c (jtagmkII_getsync): When leaving debugWIRE mode + temporarily, immediately retry with ISP, rather than leaving. + * stk500v2 (stk500v2_program_enable): Implemented similar logic + for the JTAGICE3. + +2013-05-16 Rene Liebscher <R.Liebscher@gmx.de> + + * configure.ac: reactivate check for TYPE_232H, which does not + exist in libftdi < 0.20 + * avrftdi*.*: changed include check for libftdi/libusb, deactivate + 232H if not available + * ft245r.c: changed include check for libftdi/libusb + +2013-05-08 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * main.c (main): Add option -l logfile. + * avrdude.1: Document -l option. + * doc/avrdude.texi: (Dito.) + +2013-05-15 Rene Liebscher <R.Liebscher@gmx.de> + + * configure.ac: if both found libftdi and libftdi1 use only libftdi1 + * avrdude.conf.in: fixed buff pins of avrftdi programmers (low + active buffer need now inverted numbers) + * avrftdi*.*: accept also old libftdi (0.20 still works with it), + added powerup to initialize + * ft245r.c: accept libftdi1, code cleanup and make it more similar + to avrfdti (os they might be merged someday) + +2013-05-08 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * configure.ac (AC_INIT): Bump version to 6.0rc1. + +2013-05-07 Hannes Weisbach <hannes_weisbach@gmx.net> + + * avrftdi_private.h: Change size of pin_checklist to N_PINS (from N_PINS-1) + * avrftdi.c: Adapt code to new size of pin_checklist. Remove pins_check() + from set_pin(). + Add pgm->power[up|down] functions as well as fill pgm->enable|disable with + proper content as suggested by Rene Liebscher. + +2013-05-05 Rene Liebscher <R.Liebscher@gmx.de> + + * pindefs.h: use unsigned int if stdint.h is not available and UINT_MAX is 0xffffffff + otherwise use unsinged long + * ft245r.c: added support for more pin functions led, vcc, buff + +2013-05-06 Hannes Weisbach <hannes_weisbach@gmx.net> + + * avrftdi_tpi.c: instead of private set_pin() function pointer use the one + declared in struct PROGRAMMER. + * avrftdi_private.h: remove set_pin function pointer. Add pin_checklist_t + member to check pgm->setpin calls during runtime. + * avrftdi.c: remove set_pin function pointer init, add pgm->setpin init. + Convert avrftdi to new 0-based pindefs infrastructure. + * avrdude.conf.in: Change all avrftdi-based programmers' pin definitions to + 0-based. + +2013-05-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * pindefs.h: Include "ac_cfg.h" before testing for HAVE_* macros. + +2013-05-05 Rene Liebscher <R.Liebscher@gmx.de> + + * main.c: revert to rev 1159 (doing pgm_display after pgm_open) + * avrpart.[ch]: moved avr_pin_name to pindefs.[ch] + * pgm.c: moved pins_to_str to pindefs.[ch], added initialization of + new pin definitions in pgm_new() + * pindefs.[ch]: added moved functions from other files, added a lot of + documentation, reformatted files using astyle to have consistent spacing, + added a new generic check function for pins + * ft245r.c: used new generic pin check function + +2013-05-03 Rene Liebscher <R.Liebscher@gmx.de> + + Create new pin definition data structures to support 0-based pin numbers, + and mixed inverse/non-inverse pin lists. + * avrftdi.c,buspirate.c,linuxgpio.c,par.c,serbb_*.c: added function call + to fill old pinno entries from new pin definitions. + * pindefs.[hc]: added data struct and helper functions for new pin definitions + * avrdude.conf.in: pins in entries using ftdi_syncbb are now 0-based + * config_gram.y: allow combinations of inverted and non-inverted pins in pin lists + * ft245r.c: reworked to work directly with the new pin definitions, + pins are now 0-based, inverse pins are supported, buff is supported + * pgm.[ch]: added new pin definitions field to programmer structure, + adapted pin display functions + +2013-05-03 Hannes Weisbach <hannes_weisbach@gmx.net> + + * avrftdi_private.h: Remove update forward declaration from avrftdi_print to + avrftdi_log. + * avrftdi_tpi.c: Do all I/O in terms of pgm->cmd_tpi()-calls instead of + avrftdi_tpi_[read,write]_byte(). + Remove unnecessary set_pin call to set MOSI high, speeds up I/O. + Removes SKEY array, moves it to tpi.h. + Integrate new avr_tpi_[program_enable,chip_erase]() and functions into + avrftdi_tpi. + * avrftdi_tpi.h: Remove avrftdi_tpi_[program_enable,chip_erase] forward + declarations. + * avr.c: Adds avr_tpi_chip_erase() generic TPI chip erase function. + Adds avr_tpi_program_enable() - generic TPI external programming enable + function. Sets guard time, reads identification register, sends SKEY command + and key, checks NVMEN bit. The required guard time has to be passed as + parameter. + * tpi.h: Adds SKEY array including CMD_SKEY in "correct" order. + +2013-05-02 Hannes Weisbach <hannes_weisbach@gmx.net> + + * avrftdi_private.h: Add libusb-1.0 include to fix include order in windows. + * NEWS: Add notice avrftdi supporting TPI + * avr.c: Fix avr_tpi_poll_nvmbsy() - poll read data instead of return code + * avrftdi_private.h, avrftdi.c: move logging #defines to from avrftdi.c to + avrftdi_private.h, so that they are available for avrftdi_tpi, too. + +2013-04-30 Hannes Weisbach <hannes_weisbach@gmx.net> + + * tpi.h: Add definition for TPI Identification Code + * avrftdi_tpi.c: Add TPI-support for FTDI-based programmers + * avrftdi_private.h: Add common include file for FTDI-based programmers + +2013-04-28 Hannes Weisbach <hannes_weisbach@gmx.net> + + * avrftdic: Rework of textual output. Messages are divided by severity and + printed accordingly to the verbosity, as specified by the user. The provided + severity level are (ERROR, WARN, INFO, DEBUG, TRACE). Where "ERROR" messages + are always printed. Shortcut-macros including function, from which the + output was generated, and line number were also added. + Some log messages were updated and other code warnings removed. + +2013-04-27 Hannes Weisbach <hannes_weisbach@gmx.net> + + * configure.ac: Add libftdi1 library check, remove TYPE_232H DECL check + * Makefile.am: Add @LIBFTDI1@ to avrdude_LDADD + * avrftdi.c: Update from libftdi0 to libftdi1. Use libftdi1's function to + find a device by vid/pid/serial instead of doing it ourself and add/update + error messages. avrftdi_print is changed so that a message is printed when + the verbosity level is greater or equal the message level, to have always-on + messages. + Fix a bug where the RX fifo of the FTDI chip is full, resulting in STALL/NAK + of the ongoing OUT request and subsequently timeout, because an IN request + cannot be issued due to the synchronous part of libftdi. This should fix + #38831 and #38659. + +2013-04-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * configure.ac(AC_CONFIG_HEADERS): Replace the old AM_CONFIG_HEADER + by this; automake 1.13+ barfs. + +2013-03-12 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * avrdude.conf.in (ATmega2564RFR2, ATmega1284RFR2, ATmega644RFR2): + New devices + +2013-01-30 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7724 Add TPI support for Bus Pirate using bitbang mode + * buspirate.[ch]: added support for BusPirate Bitbanging + * pgm_type.c: added entry for buspirate_bb + * avrdude.conf.in: added entry for buspirate_bb + +2013-01-30 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7936 Patch to support BusPirate AVR Extended Commands mode + * buspirate.c: added support for BusPirate AVR Extended Commands mode + * avrdude.1: added doc for nopagedread parameter + * doc/avrdude.texi: added doc for nopagedread parameter + +2013-01-30 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7723 Bus Pirate “raw-wire” mode which can run down to 5 kHz + * buspirate.c: added raw wire mode + * avrdude.1: added doc for rawfreq parameter + * doc/avrdude.texi: added doc for rawfreq parameter + +2013-01-30 Rene Liebscher <R.Liebscher@gmx.de> + + bug #37977 Support for Openmoko Debug Board + * avrdude.conf.in: added openmoko entry + +2013-01-29 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7932 Read USBtiny VID and PID from avrdude.conf if provided. + * avrdude.conf.in: added usbpid, usbvid to usbtiny + * usbtiny.[ch]: use usbpid, usbpid if provided in config file + +2013-01-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #38172: avrftdi: Incorrect information in avrdude.conf + * avrdude.conf.in (avrftdi): fix comments about ACBUS vs. ADBUS; + add a comment that the MPSSE signals are fixed by the FTDI + hardware and cannot be changed + +2013-01-09 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7165 Add support for bitbanging GPIO lines using the Linux sysf GPIO interface + * doc/avrdude.texi,avrdude.1: added doc for linuxgpio + * avrdude.conf.in: added template for linuxgpio programmer + * config_gram.y: pin numbers restricted to [PIN_MIN, PIN_MAX] + * pindefs.h: added PIN_MIN, PIN_MAX, removed unused LED_ON/OFF + * configure.ac: configure option enable-linuxgpio, print of enabled options + * linuxgpio.[ch]: new source for linuxgpio programmer + * Makefile.am: added linuxgpio to sources list + * pgm_type.c: added linuxgpio to programmer types list + +2013-01-08 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtagmkI.c (jtagmkI_prmsg): replace a putchar() by putc(...stderr) + * jtagmkII.c (jtagmkII_prmsg): (Dito.) + * jtag3.c (jtag3_prevent, jtag3_prmsg): (Dito.) + +2013-01-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * usb_libusb.c (usbdev_open): Downgrade the max transfer size for + the main data endpoints when being forced so by the USB; this can + happen when attaching the JTAGICE3 to a USB 1.1 connection + * jtag3.c (jtag3_initialize): When detecting a downgraded max + transfer size on the JTAGICE3 (presumably, due to being connected + to USB 1.1 only), bail out as its firmware cannot properly handle + this (by now) + +2013-01-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * ChangeLog: annual ChangeLog rotation time |