diff options
Diffstat (limited to 'src/libslic3r/GCode/PreviewData.cpp')
| -rw-r--r-- | src/libslic3r/GCode/PreviewData.cpp | 516 |
1 files changed, 0 insertions, 516 deletions
diff --git a/src/libslic3r/GCode/PreviewData.cpp b/src/libslic3r/GCode/PreviewData.cpp deleted file mode 100644 index 874a4d2ec..000000000 --- a/src/libslic3r/GCode/PreviewData.cpp +++ /dev/null @@ -1,516 +0,0 @@ -#include "Analyzer.hpp" -#include "PreviewData.hpp" -#include <I18N.hpp> -#include "Utils.hpp" - -#include <boost/format.hpp> - -//! macro used to mark string used at localization, -#define L(s) (s) - -namespace Slic3r { - -std::vector<unsigned char> Color::as_bytes() const -{ - std::vector<unsigned char> ret; - for (unsigned int i = 0; i < 4; ++i) - { - ret.push_back((unsigned char)(255.0f * rgba[i])); - } - return ret; -} - -GCodePreviewData::Extrusion::Layer::Layer(float z, const Paths& paths) - : z(z) - , paths(paths) -{ -} - -GCodePreviewData::Travel::Polyline::Polyline(EType type, EDirection direction, float feedrate, unsigned int extruder_id, const Polyline3& polyline) - : type(type) - , direction(direction) - , feedrate(feedrate) - , extruder_id(extruder_id) - , polyline(polyline) -{ -} - -GCodePreviewData::Range::Range() -{ - reset(); -} - -void GCodePreviewData::Range::reset() -{ - min_val = FLT_MAX; - max_val = -FLT_MAX; -} - -bool GCodePreviewData::Range::empty() const -{ - return min_val >= max_val; -} - -void GCodePreviewData::Range::update_from(float value) -{ - min_val = std::min(min_val, value); - max_val = std::max(max_val, value); -} - -void GCodePreviewData::Range::update_from(const RangeBase& other) -{ - min_val = std::min(min_val, other.min()); - max_val = std::max(max_val, other.max()); -} - -float GCodePreviewData::RangeBase::step_size() const -{ - return (max() - min()) / static_cast<float>(range_rainbow_colors.size() - 1); -} - -Color GCodePreviewData::RangeBase::get_color_at(float value) const -{ - // Input value scaled to the color range - float step = step_size(); - const float global_t = (step != 0.0f) ? std::max(0.0f, value - min()) / step_size() : 0.0f; // lower limit of 0.0f - - constexpr std::size_t color_max_idx = range_rainbow_colors.size() - 1; - - // Compute the two colors just below (low) and above (high) the input value - const std::size_t color_low_idx = std::clamp(static_cast<std::size_t>(global_t), std::size_t{ 0 }, color_max_idx); - const std::size_t color_high_idx = std::clamp(color_low_idx + 1, std::size_t{ 0 }, color_max_idx); - - // Compute how far the value is between the low and high colors so that they can be interpolated - const float local_t = std::min(global_t - static_cast<float>(color_low_idx), 1.0f); // upper limit of 1.0f - - // Interpolate between the low and high colors in RGB space to find exactly which color the input value should get - Color ret; - for (unsigned int i = 0; i < 4; ++i) - { - ret.rgba[i] = lerp(range_rainbow_colors[color_low_idx].rgba[i], range_rainbow_colors[color_high_idx].rgba[i], local_t); - } - return ret; -} - -float GCodePreviewData::Range::min() const -{ - return min_val; -} - -float GCodePreviewData::Range::max() const -{ - return max_val; -} - -GCodePreviewData::LegendItem::LegendItem(const std::string& text, const Color& color) - : text(text) - , color(color) -{ -} - -const Color GCodePreviewData::Extrusion::Default_Extrusion_Role_Colors[erCount] = -{ - Color(0.0f, 0.0f, 0.0f, 1.0f), // erNone - Color(1.0f, 0.0f, 0.0f, 1.0f), // erPerimeter - Color(0.0f, 1.0f, 0.0f, 1.0f), // erExternalPerimeter - Color(0.0f, 0.0f, 1.0f, 1.0f), // erOverhangPerimeter - Color(1.0f, 1.0f, 0.0f, 1.0f), // erInternalInfill - Color(1.0f, 0.0f, 1.0f, 1.0f), // erSolidInfill - Color(0.0f, 1.0f, 1.0f, 1.0f), // erTopSolidInfill - Color(0.5f, 0.5f, 0.5f, 1.0f), // erBridgeInfill - Color(1.0f, 1.0f, 1.0f, 1.0f), // erGapFill - Color(0.5f, 0.0f, 0.0f, 1.0f), // erSkirt - Color(0.0f, 0.5f, 0.0f, 1.0f), // erSupportMaterial - Color(0.0f, 0.0f, 0.5f, 1.0f), // erSupportMaterialInterface - Color(0.7f, 0.89f, 0.67f, 1.0f), // erWipeTower - Color(1.0f, 1.0f, 0.0f, 1.0f), // erCustom - Color(0.0f, 0.0f, 0.0f, 1.0f) // erMixed -}; - -const GCodePreviewData::Extrusion::EViewType GCodePreviewData::Extrusion::Default_View_Type = GCodePreviewData::Extrusion::FeatureType; - -void GCodePreviewData::Extrusion::set_default() -{ - view_type = Default_View_Type; - - ::memcpy((void*)role_colors, (const void*)Default_Extrusion_Role_Colors, erCount * sizeof(Color)); - - for (unsigned int i = 0; i < erCount; ++i) - role_names[i] = ExtrusionEntity::role_to_string(ExtrusionRole(i)); - - role_flags = 0; - for (unsigned int i = 0; i < erCount; ++i) - role_flags |= 1 << i; -} - -bool GCodePreviewData::Extrusion::is_role_flag_set(ExtrusionRole role) const -{ - return is_role_flag_set(role_flags, role); -} - -bool GCodePreviewData::Extrusion::is_role_flag_set(unsigned int flags, ExtrusionRole role) -{ - return GCodeAnalyzer::is_valid_extrusion_role(role) && (flags & (1 << (role - erPerimeter))) != 0; -} - -size_t GCodePreviewData::Extrusion::memory_used() const -{ - size_t out = sizeof(*this); - out += SLIC3R_STDVEC_MEMSIZE(this->layers, Layer); - for (const Layer &layer : this->layers) { - out += SLIC3R_STDVEC_MEMSIZE(layer.paths, Path); - for (const Path &path : layer.paths) - out += SLIC3R_STDVEC_MEMSIZE(path.polyline.points, Point); - } - return out; -} - -const float GCodePreviewData::Travel::Default_Width = 0.075f; -const float GCodePreviewData::Travel::Default_Height = 0.075f; -const Color GCodePreviewData::Travel::Default_Type_Colors[Num_Types] = -{ - Color(0.0f, 0.0f, 0.75f, 1.0f), // Move - Color(0.0f, 0.75f, 0.0f, 1.0f), // Extrude - Color(0.75f, 0.0f, 0.0f, 1.0f), // Retract -}; - -void GCodePreviewData::Travel::set_default() -{ - width = Default_Width; - height = Default_Height; - ::memcpy((void*)type_colors, (const void*)Default_Type_Colors, Num_Types * sizeof(Color)); - color_print_idx = 0; - - is_visible = false; -} - -size_t GCodePreviewData::Travel::memory_used() const -{ - size_t out = sizeof(*this); - out += SLIC3R_STDVEC_MEMSIZE(this->polylines, Polyline); - for (const Polyline &polyline : this->polylines) - out += SLIC3R_STDVEC_MEMSIZE(polyline.polyline.points, Vec3crd); - return out; -} - -const Color GCodePreviewData::Retraction::Default_Color = Color(1.0f, 1.0f, 1.0f, 1.0f); - -GCodePreviewData::Retraction::Position::Position(const Vec3crd& position, float width, float height) - : position(position) - , width(width) - , height(height) -{ -} - -void GCodePreviewData::Retraction::set_default() -{ - color = Default_Color; - is_visible = false; -} - -size_t GCodePreviewData::Retraction::memory_used() const -{ - return sizeof(*this) + SLIC3R_STDVEC_MEMSIZE(this->positions, Position); -} - -void GCodePreviewData::Shell::set_default() -{ - is_visible = false; -} - -GCodePreviewData::GCodePreviewData() -{ - set_default(); -} - -void GCodePreviewData::set_default() -{ - extrusion.set_default(); - travel.set_default(); - retraction.set_default(); - unretraction.set_default(); - shell.set_default(); - - // Configure the color range for feedrate to match the default for travels and to enable extrusions since they are always visible - ranges.feedrate.set_mode(FeedrateKind::TRAVEL, travel.is_visible); - ranges.feedrate.set_mode(FeedrateKind::EXTRUSION, true); -} - -void GCodePreviewData::reset() -{ - ranges.width.reset(); - ranges.height.reset(); - ranges.feedrate.reset(); - ranges.fan_speed.reset(); - ranges.volumetric_rate.reset(); - extrusion.layers.clear(); - travel.polylines.clear(); - retraction.positions.clear(); - unretraction.positions.clear(); -} - -bool GCodePreviewData::empty() const -{ - return extrusion.layers.empty() && travel.polylines.empty() && retraction.positions.empty() && unretraction.positions.empty(); -} - -Color GCodePreviewData::get_extrusion_role_color(ExtrusionRole role) const -{ - return extrusion.role_colors[role]; -} - -Color GCodePreviewData::get_height_color(float height) const -{ - return ranges.height.get_color_at(height); -} - -Color GCodePreviewData::get_width_color(float width) const -{ - return ranges.width.get_color_at(width); -} - -Color GCodePreviewData::get_feedrate_color(float feedrate) const -{ - return ranges.feedrate.get_color_at(feedrate); -} - -Color GCodePreviewData::get_fan_speed_color(float fan_speed) const -{ - return ranges.fan_speed.get_color_at(fan_speed); -} - -Color GCodePreviewData::get_volumetric_rate_color(float rate) const -{ - return ranges.volumetric_rate.get_color_at(rate); -} - -void GCodePreviewData::set_extrusion_role_color(const std::string& role_name, float red, float green, float blue, float alpha) -{ - for (unsigned int i = 0; i < erCount; ++i) - { - if (role_name == extrusion.role_names[i]) - { - extrusion.role_colors[i] = Color(red, green, blue, alpha); - break; - } - } -} - -void GCodePreviewData::set_extrusion_paths_colors(const std::vector<std::string>& colors) -{ - unsigned int size = (unsigned int)colors.size(); - - if (size % 2 != 0) - return; - - for (unsigned int i = 0; i < size; i += 2) - { - const std::string& color_str = colors[i + 1]; - - if (color_str.size() == 6) - { - bool valid = true; - for (int c = 0; c < 6; ++c) - { - if (::isxdigit(color_str[c]) == 0) - { - valid = false; - break; - } - } - - if (valid) - { - unsigned int color; - std::stringstream ss; - ss << std::hex << color_str; - ss >> color; - - float den = 1.0f / 255.0f; - - float r = (float)((color & 0xFF0000) >> 16) * den; - float g = (float)((color & 0x00FF00) >> 8) * den; - float b = (float)(color & 0x0000FF) * den; - - this->set_extrusion_role_color(colors[i], r, g, b, 1.0f); - } - } - } -} - -std::string GCodePreviewData::get_legend_title() const -{ - switch (extrusion.view_type) - { - case Extrusion::FeatureType: - return L("Feature type"); - case Extrusion::Height: - return L("Height (mm)"); - case Extrusion::Width: - return L("Width (mm)"); - case Extrusion::Feedrate: - return L("Speed (mm/s)"); - case Extrusion::FanSpeed: - return L("Fan Speed (%)"); - case Extrusion::VolumetricRate: - return L("Volumetric flow rate (mm³/s)"); - case Extrusion::Tool: - return L("Tool"); - case Extrusion::ColorPrint: - return L("Color Print"); - case Extrusion::Num_View_Types: - break; // just to supress warning about non-handled value - } - - return ""; -} - -GCodePreviewData::LegendItemsList GCodePreviewData::get_legend_items(const std::vector<float>& tool_colors, - const std::vector<std::string>& cp_items) const -{ - struct Helper - { - static void FillListFromRange(LegendItemsList& list, const RangeBase& range, unsigned int decimals, float scale_factor) - { - list.reserve(range_rainbow_colors.size()); - - float step = range.step_size(); - if (step == 0.0f) - { - char buf[1024]; - sprintf(buf, "%.*f", decimals, scale_factor * range.min()); - list.emplace_back(buf, range_rainbow_colors[0]); - } - else - { - for (int i = static_cast<int>(range_rainbow_colors.size()) - 1; i >= 0; --i) - { - char buf[1024]; - sprintf(buf, "%.*f", decimals, scale_factor * (range.min() + (float)i * step)); - list.emplace_back(buf, range_rainbow_colors[i]); - } - } - } - }; - - LegendItemsList items; - - switch (extrusion.view_type) - { - case Extrusion::FeatureType: - { - ExtrusionRole first_valid = erPerimeter; - ExtrusionRole last_valid = erCustom; - - items.reserve(last_valid - first_valid + 1); - for (unsigned int i = (unsigned int)first_valid; i <= (unsigned int)last_valid; ++i) - { - items.emplace_back(Slic3r::I18N::translate(extrusion.role_names[i]), extrusion.role_colors[i]); - } - - break; - } - case Extrusion::Height: - { - Helper::FillListFromRange(items, ranges.height, 3, 1.0f); - break; - } - case Extrusion::Width: - { - Helper::FillListFromRange(items, ranges.width, 3, 1.0f); - break; - } - case Extrusion::Feedrate: - { - Helper::FillListFromRange(items, ranges.feedrate, 1, 1.0f); - break; - } - case Extrusion::FanSpeed: - { - Helper::FillListFromRange(items, ranges.fan_speed, 0, 1.0f); - break; - } - case Extrusion::VolumetricRate: - { - Helper::FillListFromRange(items, ranges.volumetric_rate, 3, 1.0f); - break; - } - case Extrusion::Tool: - { - unsigned int tools_colors_count = (unsigned int)tool_colors.size() / 4; - items.reserve(tools_colors_count); - for (unsigned int i = 0; i < tools_colors_count; ++i) - { - Color color; - ::memcpy((void*)color.rgba.data(), (const void*)(tool_colors.data() + i * 4), 4 * sizeof(float)); - items.emplace_back((boost::format(Slic3r::I18N::translate(L("Extruder %d"))) % (i + 1)).str(), color); - } - - break; - } - case Extrusion::ColorPrint: - { - const int color_cnt = (int)tool_colors.size()/4; - const auto color_print_cnt = (int)cp_items.size(); - if (color_print_cnt == 1) // means "Default print color" - { - Color color; - ::memcpy((void*)color.rgba.data(), (const void*)(tool_colors.data()), 4 * sizeof(float)); - - items.emplace_back(cp_items[0], color); - break; - } - - if (color_cnt != color_print_cnt) - break; - - for (int i = 0 ; i < color_print_cnt; ++i) - { - Color color; - ::memcpy((void*)color.rgba.data(), (const void*)(tool_colors.data() + i * 4), 4 * sizeof(float)); - - items.emplace_back(cp_items[i], color); - } - break; - } - case Extrusion::Num_View_Types: - break; // just to supress warning about non-handled value - } - - return items; -} - -// Return an estimate of the memory consumed by the time estimator. -size_t GCodePreviewData::memory_used() const -{ - return - this->extrusion.memory_used() + - this->travel.memory_used() + - this->retraction.memory_used() + - this->unretraction.memory_used() + - sizeof(shell) + sizeof(ranges); -} - -const std::vector<std::string>& GCodePreviewData::ColorPrintColors() -{ - static std::vector<std::string> color_print = {"#C0392B", "#E67E22", "#F1C40F", "#27AE60", "#1ABC9C", "#2980B9", "#9B59B6"}; - return color_print; -} - -Color operator + (const Color& c1, const Color& c2) -{ - return Color(std::clamp(c1.rgba[0] + c2.rgba[0], 0.0f, 1.0f), - std::clamp(c1.rgba[1] + c2.rgba[1], 0.0f, 1.0f), - std::clamp(c1.rgba[2] + c2.rgba[2], 0.0f, 1.0f), - std::clamp(c1.rgba[3] + c2.rgba[3], 0.0f, 1.0f)); -} - -Color operator * (float f, const Color& color) -{ - return Color(std::clamp(f * color.rgba[0], 0.0f, 1.0f), - std::clamp(f * color.rgba[1], 0.0f, 1.0f), - std::clamp(f * color.rgba[2], 0.0f, 1.0f), - std::clamp(f * color.rgba[3], 0.0f, 1.0f)); -} - -} // namespace Slic3r |