diff options
Diffstat (limited to 'src/slic3r/GUI/PresetBundle.cpp')
| -rw-r--r-- | src/slic3r/GUI/PresetBundle.cpp | 1401 |
1 files changed, 1401 insertions, 0 deletions
diff --git a/src/slic3r/GUI/PresetBundle.cpp b/src/slic3r/GUI/PresetBundle.cpp new file mode 100644 index 000000000..cd3924dd0 --- /dev/null +++ b/src/slic3r/GUI/PresetBundle.cpp @@ -0,0 +1,1401 @@ +//#undef NDEBUG +#include <cassert> + +#include "PresetBundle.hpp" +#include "BitmapCache.hpp" + +#include <algorithm> +#include <fstream> +#include <boost/filesystem.hpp> +#include <boost/algorithm/clamp.hpp> +#include <boost/algorithm/string/predicate.hpp> + +#include <boost/nowide/cenv.hpp> +#include <boost/nowide/cstdio.hpp> +#include <boost/nowide/fstream.hpp> +#include <boost/property_tree/ini_parser.hpp> +#include <boost/property_tree/ptree.hpp> +#include <boost/locale.hpp> +#include <boost/log/trivial.hpp> + +#include <wx/dcmemory.h> +#include <wx/image.h> +#include <wx/choice.h> +#include <wx/bmpcbox.h> +#include <wx/wupdlock.h> + +#include "../../libslic3r/libslic3r.h" +#include "../../libslic3r/PlaceholderParser.hpp" +#include "../../libslic3r/Utils.hpp" + +// Store the print/filament/printer presets into a "presets" subdirectory of the Slic3rPE config dir. +// This breaks compatibility with the upstream Slic3r if the --datadir is used to switch between the two versions. +// #define SLIC3R_PROFILE_USE_PRESETS_SUBDIR + +namespace Slic3r { + +static std::vector<std::string> s_project_options { + "wiping_volumes_extruders", + "wiping_volumes_matrix" +}; + +PresetBundle::PresetBundle() : + prints(Preset::TYPE_PRINT, Preset::print_options(), static_cast<const HostConfig&>(FullPrintConfig::defaults())), + filaments(Preset::TYPE_FILAMENT, Preset::filament_options(), static_cast<const HostConfig&>(FullPrintConfig::defaults())), + sla_materials(Preset::TYPE_SLA_MATERIAL, Preset::sla_material_options(), static_cast<const SLAMaterialConfig&>(SLAFullPrintConfig::defaults())), + printers(Preset::TYPE_PRINTER, Preset::printer_options(), static_cast<const HostConfig&>(FullPrintConfig::defaults()), "- default FFF -"), + m_bitmapCompatible(new wxBitmap), + m_bitmapIncompatible(new wxBitmap), + m_bitmapLock(new wxBitmap), + m_bitmapLockOpen(new wxBitmap), + m_bitmapCache(new GUI::BitmapCache) +{ + if (wxImage::FindHandler(wxBITMAP_TYPE_PNG) == nullptr) + wxImage::AddHandler(new wxPNGHandler); + + // The following keys are handled by the UI, they do not have a counterpart in any StaticPrintConfig derived classes, + // therefore they need to be handled differently. As they have no counterpart in StaticPrintConfig, they are not being + // initialized based on PrintConfigDef(), but to empty values (zeros, empty vectors, empty strings). + // + // "compatible_printers", "compatible_printers_condition", "inherits", + // "print_settings_id", "filament_settings_id", "printer_settings_id", + // "printer_vendor", "printer_model", "printer_variant", "default_print_profile", "default_filament_profile" + + // Create the ID config keys, as they are not part of the Static print config classes. + this->prints.default_preset().config.optptr("print_settings_id", true); + this->prints.default_preset().compatible_printers_condition(); + this->prints.default_preset().inherits(); + + this->filaments.default_preset().config.option<ConfigOptionStrings>("filament_settings_id", true)->values = { "" }; + this->filaments.default_preset().compatible_printers_condition(); + this->filaments.default_preset().inherits(); + + this->sla_materials.default_preset().config.optptr("sla_material_settings_id", true); + this->sla_materials.default_preset().compatible_printers_condition(); + this->sla_materials.default_preset().inherits(); + + this->printers.add_default_preset(Preset::sla_printer_options(), static_cast<const SLAMaterialConfig&>(SLAFullPrintConfig::defaults()), "- default SLA -"); + this->printers.preset(1).printer_technology() = ptSLA; + for (size_t i = 0; i < 2; ++ i) { + Preset &preset = this->printers.preset(i); + preset.config.optptr("printer_settings_id", true); + preset.config.optptr("printer_vendor", true); + preset.config.optptr("printer_model", true); + preset.config.optptr("printer_variant", true); + preset.config.optptr("default_print_profile", true); + preset.config.option<ConfigOptionStrings>("default_filament_profile", true)->values = { "" }; + preset.inherits(); + } + + // Load the default preset bitmaps. + this->prints .load_bitmap_default("cog.png"); + this->filaments .load_bitmap_default("spool.png"); + this->sla_materials.load_bitmap_default("package_green.png"); + this->printers .load_bitmap_default("printer_empty.png"); + this->load_compatible_bitmaps(); + + // Re-activate the default presets, so their "edited" preset copies will be updated with the additional configuration values above. + this->prints .select_preset(0); + this->filaments .select_preset(0); + this->sla_materials.select_preset(0); + this->printers .select_preset(0); + + this->project_config.apply_only(FullPrintConfig::defaults(), s_project_options); +} + +PresetBundle::~PresetBundle() +{ + assert(m_bitmapCompatible != nullptr); + assert(m_bitmapIncompatible != nullptr); + assert(m_bitmapLock != nullptr); + assert(m_bitmapLockOpen != nullptr); + delete m_bitmapCompatible; + m_bitmapCompatible = nullptr; + delete m_bitmapIncompatible; + m_bitmapIncompatible = nullptr; + delete m_bitmapLock; + m_bitmapLock = nullptr; + delete m_bitmapLockOpen; + m_bitmapLockOpen = nullptr; + delete m_bitmapCache; + m_bitmapCache = nullptr; +} + +void PresetBundle::reset(bool delete_files) +{ + // Clear the existing presets, delete their respective files. + this->vendors.clear(); + this->prints .reset(delete_files); + this->filaments .reset(delete_files); + this->sla_materials.reset(delete_files); + this->printers .reset(delete_files); + this->filament_presets.clear(); + this->filament_presets.emplace_back(this->filaments.get_selected_preset_name()); + this->obsolete_presets.prints.clear(); + this->obsolete_presets.filaments.clear(); + this->obsolete_presets.sla_materials.clear(); + this->obsolete_presets.printers.clear(); +} + +void PresetBundle::setup_directories() +{ + boost::filesystem::path data_dir = boost::filesystem::path(Slic3r::data_dir()); + std::initializer_list<boost::filesystem::path> paths = { + data_dir, + data_dir / "vendor", + data_dir / "cache", +#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR + // Store the print/filament/printer presets into a "presets" directory. + data_dir / "presets", + data_dir / "presets" / "print", + data_dir / "presets" / "filament", + data_dir / "presets" / "sla_material", + data_dir / "presets" / "printer" +#else + // Store the print/filament/printer presets at the same location as the upstream Slic3r. + data_dir / "print", + data_dir / "filament", + data_dir / "sla_material", + data_dir / "printer" +#endif + }; + for (const boost::filesystem::path &path : paths) { + boost::filesystem::path subdir = path; + subdir.make_preferred(); + if (! boost::filesystem::is_directory(subdir) && + ! boost::filesystem::create_directory(subdir)) + throw std::runtime_error(std::string("Slic3r was unable to create its data directory at ") + subdir.string()); + } +} + +void PresetBundle::load_presets(const AppConfig &config) +{ + // First load the vendor specific system presets. + std::string errors_cummulative = this->load_system_presets(); + + const std::string dir_user_presets = data_dir() +#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR + // Store the print/filament/printer presets into a "presets" directory. + + "/presets" +#else + // Store the print/filament/printer presets at the same location as the upstream Slic3r. +#endif + ; + try { + this->prints.load_presets(dir_user_presets, "print"); + } catch (const std::runtime_error &err) { + errors_cummulative += err.what(); + } + try { + this->filaments.load_presets(dir_user_presets, "filament"); + } catch (const std::runtime_error &err) { + errors_cummulative += err.what(); + } + try { + this->sla_materials.load_presets(dir_user_presets, "sla_material"); + } catch (const std::runtime_error &err) { + errors_cummulative += err.what(); + } + try { + this->printers.load_presets(dir_user_presets, "printer"); + } catch (const std::runtime_error &err) { + errors_cummulative += err.what(); + } + this->update_multi_material_filament_presets(); + this->update_compatible_with_printer(false); + if (! errors_cummulative.empty()) + throw std::runtime_error(errors_cummulative); + + this->load_selections(config); +} + +// Load system presets into this PresetBundle. +// For each vendor, there will be a single PresetBundle loaded. +std::string PresetBundle::load_system_presets() +{ + // Here the vendor specific read only Config Bundles are stored. + boost::filesystem::path dir = (boost::filesystem::path(data_dir()) / "vendor").make_preferred(); + std::string errors_cummulative; + bool first = true; + for (auto &dir_entry : boost::filesystem::directory_iterator(dir)) + if (boost::filesystem::is_regular_file(dir_entry.status()) && boost::algorithm::iends_with(dir_entry.path().filename().string(), ".ini")) { + std::string name = dir_entry.path().filename().string(); + // Remove the .ini suffix. + name.erase(name.size() - 4); + try { + // Load the config bundle, flatten it. + if (first) { + // Reset this PresetBundle and load the first vendor config. + this->load_configbundle(dir_entry.path().string(), LOAD_CFGBNDLE_SYSTEM); + first = false; + } else { + // Load the other vendor configs, merge them with this PresetBundle. + // Report duplicate profiles. + PresetBundle other; + other.load_configbundle(dir_entry.path().string(), LOAD_CFGBNDLE_SYSTEM); + std::vector<std::string> duplicates = this->merge_presets(std::move(other)); + if (! duplicates.empty()) { + errors_cummulative += "Vendor configuration file " + name + " contains the following presets with names used by other vendors: "; + for (size_t i = 0; i < duplicates.size(); ++ i) { + if (i > 0) + errors_cummulative += ", "; + errors_cummulative += duplicates[i]; + } + } + } + } catch (const std::runtime_error &err) { + errors_cummulative += err.what(); + errors_cummulative += "\n"; + } + } + if (first) { + // No config bundle loaded, reset. + this->reset(false); + } + return errors_cummulative; +} + +// Merge one vendor's presets with the other vendor's presets, report duplicates. +std::vector<std::string> PresetBundle::merge_presets(PresetBundle &&other) +{ + this->vendors.insert(other.vendors.begin(), other.vendors.end()); + std::vector<std::string> duplicate_prints = this->prints .merge_presets(std::move(other.prints), this->vendors); + std::vector<std::string> duplicate_filaments = this->filaments .merge_presets(std::move(other.filaments), this->vendors); + std::vector<std::string> duplicate_sla_materials = this->sla_materials.merge_presets(std::move(other.sla_materials), this->vendors); + std::vector<std::string> duplicate_printers = this->printers .merge_presets(std::move(other.printers), this->vendors); + append(this->obsolete_presets.prints, std::move(other.obsolete_presets.prints)); + append(this->obsolete_presets.filaments, std::move(other.obsolete_presets.filaments)); + append(this->obsolete_presets.sla_materials, std::move(other.obsolete_presets.sla_materials)); + append(this->obsolete_presets.printers, std::move(other.obsolete_presets.printers)); + append(duplicate_prints, std::move(duplicate_filaments)); + append(duplicate_prints, std::move(duplicate_sla_materials)); + append(duplicate_prints, std::move(duplicate_printers)); + return duplicate_prints; +} + +static inline std::string remove_ini_suffix(const std::string &name) +{ + std::string out = name; + if (boost::iends_with(out, ".ini")) + out.erase(out.end() - 4, out.end()); + return out; +} + +// Set the "enabled" flag for printer vendors, printer models and printer variants +// based on the user configuration. +// If the "vendor" section is missing, enable all models and variants of the particular vendor. +void PresetBundle::load_installed_printers(const AppConfig &config) +{ + for (auto &preset : printers) { + preset.set_visible_from_appconfig(config); + } +} + +// Load selections (current print, current filaments, current printer) from config.ini +// This is done on application start up or after updates are applied. +void PresetBundle::load_selections(const AppConfig &config) +{ + // Update visibility of presets based on application vendor / model / variant configuration. + this->load_installed_printers(config); + + // Parse the initial print / filament / printer profile names. + std::string initial_print_profile_name = remove_ini_suffix(config.get("presets", "print")); + std::string initial_filament_profile_name = remove_ini_suffix(config.get("presets", "filament")); + std::string initial_sla_material_profile_name = remove_ini_suffix(config.get("presets", "sla_material")); + std::string initial_printer_profile_name = remove_ini_suffix(config.get("presets", "printer")); + + // Activate print / filament / printer profiles from the config. + // If the printer profile enumerated by the config are not visible, select an alternate preset. + // Do not select alternate profiles for the print / filament profiles as those presets + // will be selected by the following call of this->update_compatible_with_printer(true). + prints.select_preset_by_name_strict(initial_print_profile_name); + filaments.select_preset_by_name_strict(initial_filament_profile_name); + sla_materials.select_preset_by_name_strict(initial_sla_material_profile_name); + printers.select_preset_by_name(initial_printer_profile_name, true); + + if (printers.get_selected_preset().printer_technology() == ptFFF){ + // Load the names of the other filament profiles selected for a multi-material printer. + auto *nozzle_diameter = dynamic_cast<const ConfigOptionFloats*>(printers.get_selected_preset().config.option("nozzle_diameter")); + size_t num_extruders = nozzle_diameter->values.size(); + this->filament_presets = { initial_filament_profile_name }; + for (unsigned int i = 1; i < (unsigned int)num_extruders; ++i) { + char name[64]; + sprintf(name, "filament_%d", i); + if (!config.has("presets", name)) + break; + this->filament_presets.emplace_back(remove_ini_suffix(config.get("presets", name))); + } + // Do not define the missing filaments, so that the update_compatible_with_printer() will use the preferred filaments. + this->filament_presets.resize(num_extruders, ""); + } + + // Update visibility of presets based on their compatibility with the active printer. + // Always try to select a compatible print and filament preset to the current printer preset, + // as the application may have been closed with an active "external" preset, which does not + // exist. + this->update_compatible_with_printer(true); + this->update_multi_material_filament_presets(); +} + +// Export selections (current print, current filaments, current printer) into config.ini +void PresetBundle::export_selections(AppConfig &config) +{ + assert(filament_presets.size() >= 1); + assert(filament_presets.size() > 1 || filaments.get_selected_preset_name() == filament_presets.front()); + config.clear_section("presets"); + config.set("presets", "print", prints.get_selected_preset_name()); + config.set("presets", "filament", filament_presets.front()); + for (int i = 1; i < filament_presets.size(); ++i) { + char name[64]; + sprintf(name, "filament_%d", i); + config.set("presets", name, filament_presets[i]); + } + config.set("presets", "sla_material", sla_materials.get_selected_preset_name()); + config.set("presets", "printer", printers.get_selected_preset_name()); +} + +void PresetBundle::export_selections(PlaceholderParser &pp) +{ + assert(filament_presets.size() >= 1); + assert(filament_presets.size() > 1 || filaments.get_selected_preset_name() == filament_presets.front()); + switch (printers.get_edited_preset().printer_technology()) { + case ptFFF: + pp.set("print_preset", prints.get_selected_preset().name); + pp.set("filament_preset", filament_presets); + break; + case ptSLA: + pp.set("sla_material_preset", sla_materials.get_selected_preset().name); + break; + } + pp.set("printer_preset", printers.get_selected_preset().name); +} + +bool PresetBundle::load_compatible_bitmaps() +{ + const std::string path_bitmap_compatible = "flag-green-icon.png"; + const std::string path_bitmap_incompatible = "flag-red-icon.png"; + const std::string path_bitmap_lock = "sys_lock.png";//"lock.png"; + const std::string path_bitmap_lock_open = "sys_unlock.png";//"lock_open.png"; + bool loaded_compatible = m_bitmapCompatible ->LoadFile( + wxString::FromUTF8(Slic3r::var(path_bitmap_compatible).c_str()), wxBITMAP_TYPE_PNG); + bool loaded_incompatible = m_bitmapIncompatible->LoadFile( + wxString::FromUTF8(Slic3r::var(path_bitmap_incompatible).c_str()), wxBITMAP_TYPE_PNG); + bool loaded_lock = m_bitmapLock->LoadFile( + wxString::FromUTF8(Slic3r::var(path_bitmap_lock).c_str()), wxBITMAP_TYPE_PNG); + bool loaded_lock_open = m_bitmapLockOpen->LoadFile( + wxString::FromUTF8(Slic3r::var(path_bitmap_lock_open).c_str()), wxBITMAP_TYPE_PNG); + if (loaded_compatible) { + prints .set_bitmap_compatible(m_bitmapCompatible); + filaments .set_bitmap_compatible(m_bitmapCompatible); + sla_materials.set_bitmap_compatible(m_bitmapCompatible); +// printers .set_bitmap_compatible(m_bitmapCompatible); + } + if (loaded_incompatible) { + prints .set_bitmap_incompatible(m_bitmapIncompatible); + filaments .set_bitmap_incompatible(m_bitmapIncompatible); + sla_materials.set_bitmap_incompatible(m_bitmapIncompatible); +// printers .set_bitmap_incompatible(m_bitmapIncompatible); + } + if (loaded_lock) { + prints .set_bitmap_lock(m_bitmapLock); + filaments .set_bitmap_lock(m_bitmapLock); + sla_materials.set_bitmap_lock(m_bitmapLock); + printers .set_bitmap_lock(m_bitmapLock); + } + if (loaded_lock_open) { + prints .set_bitmap_lock_open(m_bitmapLock); + filaments .set_bitmap_lock_open(m_bitmapLock); + sla_materials.set_bitmap_lock_open(m_bitmapLock); + printers .set_bitmap_lock_open(m_bitmapLock); + } + return loaded_compatible && loaded_incompatible && loaded_lock && loaded_lock_open; +} + +DynamicPrintConfig PresetBundle::full_config() const +{ + return (this->printers.get_edited_preset().printer_technology() == ptFFF) ? + this->full_fff_config() : + this->full_sla_config(); +} + +DynamicPrintConfig PresetBundle::full_fff_config() const +{ + DynamicPrintConfig out; + out.apply(FullPrintConfig::defaults()); + out.apply(this->prints.get_edited_preset().config); + // Add the default filament preset to have the "filament_preset_id" defined. + out.apply(this->filaments.default_preset().config); + out.apply(this->printers.get_edited_preset().config); + out.apply(this->project_config); + + auto *nozzle_diameter = dynamic_cast<const ConfigOptionFloats*>(out.option("nozzle_diameter")); + size_t num_extruders = nozzle_diameter->values.size(); + // Collect the "compatible_printers_condition" and "inherits" values over all presets (print, filaments, printers) into a single vector. + std::vector<std::string> compatible_printers_condition; + std::vector<std::string> inherits; + compatible_printers_condition.emplace_back(this->prints.get_edited_preset().compatible_printers_condition()); + inherits .emplace_back(this->prints.get_edited_preset().inherits()); + + if (num_extruders <= 1) { + out.apply(this->filaments.get_edited_preset().config); + compatible_printers_condition.emplace_back(this->filaments.get_edited_preset().compatible_printers_condition()); + inherits .emplace_back(this->filaments.get_edited_preset().inherits()); + } else { + // Retrieve filament presets and build a single config object for them. + // First collect the filament configurations based on the user selection of this->filament_presets. + // Here this->filaments.find_preset() and this->filaments.first_visible() return the edited copy of the preset if active. + std::vector<const DynamicPrintConfig*> filament_configs; + for (const std::string &filament_preset_name : this->filament_presets) + filament_configs.emplace_back(&this->filaments.find_preset(filament_preset_name, true)->config); + while (filament_configs.size() < num_extruders) + filament_configs.emplace_back(&this->filaments.first_visible().config); + for (const DynamicPrintConfig *cfg : filament_configs) { + compatible_printers_condition.emplace_back(Preset::compatible_printers_condition(*const_cast<DynamicPrintConfig*>(cfg))); + inherits .emplace_back(Preset::inherits(*const_cast<DynamicPrintConfig*>(cfg))); + } + // Option values to set a ConfigOptionVector from. + std::vector<const ConfigOption*> filament_opts(num_extruders, nullptr); + // loop through options and apply them to the resulting config. + for (const t_config_option_key &key : this->filaments.default_preset().config.keys()) { + if (key == "compatible_printers") + continue; + // Get a destination option. + ConfigOption *opt_dst = out.option(key, false); + if (opt_dst->is_scalar()) { + // Get an option, do not create if it does not exist. + const ConfigOption *opt_src = filament_configs.front()->option(key); + if (opt_src != nullptr) + opt_dst->set(opt_src); + } else { + // Setting a vector value from all filament_configs. + for (size_t i = 0; i < filament_opts.size(); ++ i) + filament_opts[i] = filament_configs[i]->option(key); + static_cast<ConfigOptionVectorBase*>(opt_dst)->set(filament_opts); + } + } + } + + // Don't store the "compatible_printers_condition" for the printer profile, there is none. + inherits.emplace_back(this->printers.get_edited_preset().inherits()); + + // These two value types clash between the print and filament profiles. They should be renamed. + out.erase("compatible_printers"); + out.erase("compatible_printers_condition"); + out.erase("inherits"); + + static const char *keys[] = { "perimeter", "infill", "solid_infill", "support_material", "support_material_interface" }; + for (size_t i = 0; i < sizeof(keys) / sizeof(keys[0]); ++ i) { + std::string key = std::string(keys[i]) + "_extruder"; + auto *opt = dynamic_cast<ConfigOptionInt*>(out.option(key, false)); + assert(opt != nullptr); + opt->value = boost::algorithm::clamp<int>(opt->value, 0, int(num_extruders)); + } + + out.option<ConfigOptionString >("print_settings_id", true)->value = this->prints.get_selected_preset().name; + out.option<ConfigOptionStrings>("filament_settings_id", true)->values = this->filament_presets; + out.option<ConfigOptionString >("printer_settings_id", true)->value = this->printers.get_selected_preset().name; + + // Serialize the collected "compatible_printers_condition" and "inherits" fields. + // There will be 1 + num_exturders fields for "inherits" and 2 + num_extruders for "compatible_printers_condition" stored. + // The vector will not be stored if all fields are empty strings. + auto add_if_some_non_empty = [&out](std::vector<std::string> &&values, const std::string &key) { + bool nonempty = false; + for (const std::string &v : values) + if (! v.empty()) { + nonempty = true; + break; + } + if (nonempty) + out.set_key_value(key, new ConfigOptionStrings(std::move(values))); + }; + add_if_some_non_empty(std::move(compatible_printers_condition), "compatible_printers_condition_cummulative"); + add_if_some_non_empty(std::move(inherits), "inherits_cummulative"); + return out; +} + +DynamicPrintConfig PresetBundle::full_sla_config() const +{ + DynamicPrintConfig out; + out.apply(SLAFullPrintConfig::defaults()); + out.apply(this->sla_materials.get_edited_preset().config); + out.apply(this->printers.get_edited_preset().config); + // There are no project configuration values as of now, the project_config is reserved for FFF printers. +// out.apply(this->project_config); + + // Collect the "compatible_printers_condition" and "inherits" values over all presets (sla_materials, printers) into a single vector. + std::vector<std::string> compatible_printers_condition; + std::vector<std::string> inherits; + compatible_printers_condition.emplace_back(this->/*prints*/sla_materials.get_edited_preset().compatible_printers_condition()); + inherits .emplace_back(this->/*prints*/sla_materials.get_edited_preset().inherits()); + inherits .emplace_back(this->printers.get_edited_preset().inherits()); + + // These two value types clash between the print and filament profiles. They should be renamed. + out.erase("compatible_printers"); + out.erase("compatible_printers_condition"); + out.erase("inherits"); + + out.option<ConfigOptionString >("sla_material_settings_id", true)->value = this->sla_materials.get_selected_preset().name; + out.option<ConfigOptionString >("printer_settings_id", true)->value = this->printers.get_selected_preset().name; + + // Serialize the collected "compatible_printers_condition" and "inherits" fields. + // There will be 1 + num_exturders fields for "inherits" and 2 + num_extruders for "compatible_printers_condition" stored. + // The vector will not be stored if all fields are empty strings. + auto add_if_some_non_empty = [&out](std::vector<std::string> &&values, const std::string &key) { + bool nonempty = false; + for (const std::string &v : values) + if (! v.empty()) { + nonempty = true; + break; + } + if (nonempty) + out.set_key_value(key, new ConfigOptionStrings(std::move(values))); + }; + add_if_some_non_empty(std::move(compatible_printers_condition), "compatible_printers_condition_cummulative"); + add_if_some_non_empty(std::move(inherits), "inherits_cummulative"); + return out; +} + +// Load an external config file containing the print, filament and printer presets. +// Instead of a config file, a G-code may be loaded containing the full set of parameters. +// In the future the configuration will likely be read from an AMF file as well. +// If the file is loaded successfully, its print / filament / printer profiles will be activated. +void PresetBundle::load_config_file(const std::string &path) +{ + if (boost::iends_with(path, ".gcode") || boost::iends_with(path, ".g")) { + DynamicPrintConfig config; + config.apply(FullPrintConfig::defaults()); + config.load_from_gcode_file(path); + Preset::normalize(config); + load_config_file_config(path, true, std::move(config)); + return; + } + + // 1) Try to load the config file into a boost property tree. + boost::property_tree::ptree tree; + try { + boost::nowide::ifstream ifs(path); + boost::property_tree::read_ini(ifs, tree); + } catch (const std::ifstream::failure &err) { + throw std::runtime_error(std::string("The config file cannot be loaded: ") + path + "\n\tReason: " + err.what()); + } catch (const std::runtime_error &err) { + throw std::runtime_error(std::string("Failed loading the preset file: ") + path + "\n\tReason: " + err.what()); + } + + // 2) Continue based on the type of the configuration file. + ConfigFileType config_file_type = guess_config_file_type(tree); + switch (config_file_type) { + case CONFIG_FILE_TYPE_UNKNOWN: + throw std::runtime_error(std::string("Unknown configuration file type: ") + path); + case CONFIG_FILE_TYPE_APP_CONFIG: + throw std::runtime_error(std::string("Invalid configuration file: ") + path + ". This is an application config file."); + case CONFIG_FILE_TYPE_CONFIG: + { + // Initialize a config from full defaults. + DynamicPrintConfig config; + config.apply(FullPrintConfig::defaults()); + config.load(tree); + Preset::normalize(config); + load_config_file_config(path, true, std::move(config)); + break; + } + case CONFIG_FILE_TYPE_CONFIG_BUNDLE: + load_config_file_config_bundle(path, tree); + break; + } +} + +void PresetBundle::load_config_string(const char* str, const char* source_filename) +{ + if (str != nullptr) + { + DynamicPrintConfig config; + config.apply(FullPrintConfig::defaults()); + config.load_from_gcode_string(str); + Preset::normalize(config); + load_config_file_config((source_filename == nullptr) ? "" : source_filename, true, std::move(config)); + } +} + +// Load a config file from a boost property_tree. This is a private method called from load_config_file. +void PresetBundle::load_config_file_config(const std::string &name_or_path, bool is_external, DynamicPrintConfig &&config) +{ + PrinterTechnology printer_technology = Preset::printer_technology(config); + + // The "compatible_printers" field should not have been exported into a config.ini or a G-code anyway, + // but some of the alpha versions of Slic3r did. + { + ConfigOption *opt_compatible = config.optptr("compatible_printers"); + if (opt_compatible != nullptr) { + assert(opt_compatible->type() == coStrings); + if (opt_compatible->type() == coStrings) + static_cast<ConfigOptionStrings*>(opt_compatible)->values.clear(); + } + } + + size_t num_extruders = (printer_technology == ptFFF) ? + std::min(config.option<ConfigOptionFloats>("nozzle_diameter" )->values.size(), + config.option<ConfigOptionFloats>("filament_diameter")->values.size()) : + 0; + // Make a copy of the "compatible_printers_condition_cummulative" and "inherits_cummulative" vectors, which + // accumulate values over all presets (print, filaments, printers). + // These values will be distributed into their particular presets when loading. + std::vector<std::string> compatible_printers_condition_values = std::move(config.option<ConfigOptionStrings>("compatible_printers_condition_cummulative", true)->values); + std::vector<std::string> inherits_values = std::move(config.option<ConfigOptionStrings>("inherits_cummulative", true)->values); + std::string &compatible_printers_condition = Preset::compatible_printers_condition(config); + std::string &inherits = Preset::inherits(config); + compatible_printers_condition_values.resize(num_extruders + 2, std::string()); + inherits_values.resize(num_extruders + 2, std::string()); + // The "default_filament_profile" will be later extracted into the printer profile. + if (printer_technology == ptFFF) + config.option<ConfigOptionStrings>("default_filament_profile", true)->values.resize(num_extruders, std::string()); + + // 1) Create a name from the file name. + // Keep the suffix (.ini, .gcode, .amf, .3mf etc) to differentiate it from the normal profiles. + std::string name = is_external ? boost::filesystem::path(name_or_path).filename().string() : name_or_path; + + // 2) If the loading succeeded, split and load the config into print / filament / printer settings. + // First load the print and printer presets. + for (size_t i_group = 0; i_group < 2; ++ i_group) { + PresetCollection &presets = (i_group == 0) ? ((printer_technology == ptFFF) ? this->prints : this->sla_materials) : this->printers; + // Split the "compatible_printers_condition" and "inherits" values one by one from a single vector to the print & printer profiles. + size_t idx = (i_group == 0) ? 0 : num_extruders + 1; + inherits = inherits_values[idx]; + compatible_printers_condition = compatible_printers_condition_values[idx]; + if (is_external) + presets.load_external_preset(name_or_path, name, + config.opt_string((i_group == 0) ? ((printer_technology == ptFFF) ? "print_settings_id" : "sla_material_id") : "printer_settings_id", true), + config); + else + presets.load_preset(presets.path_from_name(name), name, config).save(); + } + + if (Preset::printer_technology(config) == ptFFF) { + // 3) Now load the filaments. If there are multiple filament presets, split them and load them. + auto old_filament_profile_names = config.option<ConfigOptionStrings>("filament_settings_id", true); + old_filament_profile_names->values.resize(num_extruders, std::string()); + + if (num_extruders <= 1) { + // Split the "compatible_printers_condition" and "inherits" from the cummulative vectors to separate filament presets. + inherits = inherits_values[1]; + compatible_printers_condition = compatible_printers_condition_values[1]; + if (is_external) + this->filaments.load_external_preset(name_or_path, name, old_filament_profile_names->values.front(), config); + else + this->filaments.load_preset(this->filaments.path_from_name(name), name, config).save(); + this->filament_presets.clear(); + this->filament_presets.emplace_back(name); + } else { + // Split the filament presets, load each of them separately. + std::vector<DynamicPrintConfig> configs(num_extruders, this->filaments.default_preset().config); + // loop through options and scatter them into configs. + for (const t_config_option_key &key : this->filaments.default_preset().config.keys()) { + const ConfigOption *other_opt = config.option(key); + if (other_opt == nullptr) + continue; + if (other_opt->is_scalar()) { + for (size_t i = 0; i < configs.size(); ++ i) + configs[i].option(key, false)->set(other_opt); + } else if (key != "compatible_printers") { + for (size_t i = 0; i < configs.size(); ++ i) + static_cast<ConfigOptionVectorBase*>(configs[i].option(key, false))->set_at(other_opt, 0, i); + } + } + // Load the configs into this->filaments and make them active. + this->filament_presets.clear(); + for (size_t i = 0; i < configs.size(); ++ i) { + DynamicPrintConfig &cfg = configs[i]; + // Split the "compatible_printers_condition" and "inherits" from the cummulative vectors to separate filament presets. + cfg.opt_string("compatible_printers_condition", true) = compatible_printers_condition_values[i + 1]; + cfg.opt_string("inherits", true) = inherits_values[i + 1]; + // Load all filament presets, but only select the first one in the preset dialog. + Preset *loaded = nullptr; + if (is_external) + loaded = &this->filaments.load_external_preset(name_or_path, name, + (i < old_filament_profile_names->values.size()) ? old_filament_profile_names->values[i] : "", + std::move(cfg), i == 0); + else { + // Used by the config wizard when creating a custom setup. + // Therefore this block should only be called for a single extruder. + char suffix[64]; + if (i == 0) + suffix[0] = 0; + else + sprintf(suffix, "%d", i); + std::string new_name = name + suffix; + loaded = &this->filaments.load_preset(this->filaments.path_from_name(new_name), + new_name, std::move(cfg), i == 0); + loaded->save(); + } + this->filament_presets.emplace_back(loaded->name); + } + } + + // 4) Load the project config values (the per extruder wipe matrix etc). + this->project_config.apply_only(config, s_project_options); + } + + this->update_compatible_with_printer(false); +} + +// Load the active configuration of a config bundle from a boost property_tree. This is a private method called from load_config_file. +void PresetBundle::load_config_file_config_bundle(const std::string &path, const boost::property_tree::ptree &tree) +{ + // 1) Load the config bundle into a temp data. + PresetBundle tmp_bundle; + // Load the config bundle, don't save the loaded presets to user profile directory. + tmp_bundle.load_configbundle(path, 0); + std::string bundle_name = std::string(" - ") + boost::filesystem::path(path).filename().string(); + + // 2) Extract active configs from the config bundle, copy them and activate them in this bundle. + auto load_one = [this, &path, &bundle_name](PresetCollection &collection_dst, PresetCollection &collection_src, const std::string &preset_name_src, bool activate) -> std::string { + Preset *preset_src = collection_src.find_preset(preset_name_src, false); + Preset *preset_dst = collection_dst.find_preset(preset_name_src, false); + assert(preset_src != nullptr); + std::string preset_name_dst; + if (preset_dst != nullptr && preset_dst->is_default) { + // No need to copy a default preset, it always exists in collection_dst. + if (activate) + collection_dst.select_preset(0); + return preset_name_src; + } else if (preset_dst != nullptr && preset_src->config == preset_dst->config) { + // Don't save as the config exists in the current bundle and its content is the same. + return preset_name_src; + } else { + // Generate a new unique name. + preset_name_dst = preset_name_src + bundle_name; + Preset *preset_dup = nullptr; + for (size_t i = 1; (preset_dup = collection_dst.find_preset(preset_name_dst, false)) != nullptr; ++ i) { + if (preset_src->config == preset_dup->config) + // The preset has been already copied into collection_dst. + return preset_name_dst; + // Try to generate another name. + char buf[64]; + sprintf(buf, " (%d)", i); + preset_name_dst = preset_name_src + buf + bundle_name; + } + } + assert(! preset_name_dst.empty()); + // Save preset_src->config into collection_dst under preset_name_dst. + // The "compatible_printers" field should not have been exported into a config.ini or a G-code anyway, + // but some of the alpha versions of Slic3r did. + ConfigOption *opt_compatible = preset_src->config.optptr("compatible_printers"); + if (opt_compatible != nullptr) { + assert(opt_compatible->type() == coStrings); + if (opt_compatible->type() == coStrings) + static_cast<ConfigOptionStrings*>(opt_compatible)->values.clear(); + } + collection_dst.load_preset(path, preset_name_dst, std::move(preset_src->config), activate).is_external = true; + return preset_name_dst; + }; + load_one(this->prints, tmp_bundle.prints, tmp_bundle.prints .get_selected_preset().name, true); + load_one(this->filaments, tmp_bundle.filaments, tmp_bundle.filaments .get_selected_preset().name, true); + load_one(this->sla_materials, tmp_bundle.sla_materials, tmp_bundle.sla_materials.get_selected_preset().name, true); + load_one(this->printers, tmp_bundle.printers, tmp_bundle.printers .get_selected_preset().name, true); + this->update_multi_material_filament_presets(); + for (size_t i = 1; i < std::min(tmp_bundle.filament_presets.size(), this->filament_presets.size()); ++ i) + this->filament_presets[i] = load_one(this->filaments, tmp_bundle.filaments, tmp_bundle.filament_presets[i], false); + + this->update_compatible_with_printer(false); +} + +// Process the Config Bundle loaded as a Boost property tree. +// For each print, filament and printer preset (group defined by group_name), apply the inherited presets. +// The presets starting with '*' are considered non-terminal and they are +// removed through the flattening process by this function. +// This function will never fail, but it will produce error messages through boost::log. +static void flatten_configbundle_hierarchy(boost::property_tree::ptree &tree, const std::string &group_name) +{ + namespace pt = boost::property_tree; + + typedef std::pair<pt::ptree::key_type, pt::ptree> ptree_child_type; + + // 1) For the group given by group_name, initialize the presets. + struct Prst { + Prst(const std::string &name, pt::ptree *node) : name(name), node(node) {} + // Name of this preset. If the name starts with '*', it is an intermediate preset, + // which will not make it into the result. + const std::string name; + // Link to the source boost property tree node, owned by tree. + pt::ptree *node; + // Link to the presets, from which this preset inherits. + std::vector<Prst*> inherits; + // Link to the presets, for which this preset is a direct parent. + std::vector<Prst*> parent_of; + // When running the Kahn's Topological sorting algorithm, this counter is decreased from inherits.size() to zero. + // A cycle is indicated, if the number does not drop to zero after the Kahn's algorithm finishes. + size_t num_incoming_edges_left = 0; + // Sorting by the name, to be used when inserted into std::set. + bool operator==(const Prst &rhs) const { return this->name == rhs.name; } + bool operator< (const Prst &rhs) const { return this->name < rhs.name; } + }; + // Find the presets, store them into a std::map, addressed by their names. + std::set<Prst> presets; + std::string group_name_preset = group_name + ":"; + for (auto §ion : tree) + if (boost::starts_with(section.first, group_name_preset) && section.first.size() > group_name_preset.size()) + presets.emplace(section.first.substr(group_name_preset.size()), §ion.second); + // Fill in the "inherits" and "parent_of" members, report invalid inheritance fields. + for (const Prst &prst : presets) { + // Parse the list of comma separated values, possibly enclosed in quotes. + std::vector<std::string> inherits_names; + if (Slic3r::unescape_strings_cstyle(prst.node->get<std::string>("inherits", ""), inherits_names)) { + // Resolve the inheritance by name. + std::vector<Prst*> &inherits_nodes = const_cast<Prst&>(prst).inherits; + for (const std::string &node_name : inherits_names) { + auto it = presets.find(Prst(node_name, nullptr)); + if (it == presets.end()) + BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " inherits an unknown preset \"" << node_name << "\""; + else { + inherits_nodes.emplace_back(const_cast<Prst*>(&(*it))); + inherits_nodes.back()->parent_of.emplace_back(const_cast<Prst*>(&prst)); + } + } + } else { + BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " has an invalid \"inherits\" field"; + } + // Remove the "inherits" key, it has no meaning outside the config bundle. + const_cast<pt::ptree*>(prst.node)->erase("inherits"); + } + + // 2) Create a linear ordering for the directed acyclic graph of preset inheritance. + // https://en.wikipedia.org/wiki/Topological_sorting + // Kahn's algorithm. + std::vector<Prst*> sorted; + { + // Initialize S with the set of all nodes with no incoming edge. + std::deque<Prst*> S; + for (const Prst &prst : presets) + if (prst.inherits.empty()) + S.emplace_back(const_cast<Prst*>(&prst)); + else + const_cast<Prst*>(&prst)->num_incoming_edges_left = prst.inherits.size(); + while (! S.empty()) { + Prst *n = S.front(); + S.pop_front(); + sorted.emplace_back(n); + for (Prst *m : n->parent_of) { + assert(m->num_incoming_edges_left > 0); + if (-- m->num_incoming_edges_left == 0) { + // We have visited all parents of m. + S.emplace_back(m); + } + } + } + if (sorted.size() < presets.size()) { + for (const Prst &prst : presets) + if (prst.num_incoming_edges_left) + BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " has cyclic dependencies"; + } + } + + // Apply the dependencies in their topological ordering. + for (Prst *prst : sorted) { + // Merge the preset nodes in their order of application. + // Iterate in a reverse order, so the last change will be placed first in merged. + for (auto it_inherits = prst->inherits.rbegin(); it_inherits != prst->inherits.rend(); ++ it_inherits) + for (auto it = (*it_inherits)->node->begin(); it != (*it_inherits)->node->end(); ++ it) + if (prst->node->find(it->first) == prst->node->not_found()) + prst->node->add_child(it->first, it->second); + } + + // Remove the "internal" presets from the ptree. These presets are marked with '*'. + group_name_preset += '*'; + for (auto it_section = tree.begin(); it_section != tree.end(); ) { + if (boost::starts_with(it_section->first, group_name_preset) && it_section->first.size() > group_name_preset.size()) + // Remove the "internal" preset from the ptree. + it_section = tree.erase(it_section); + else + // Keep the preset. + ++ it_section; + } +} + +static void flatten_configbundle_hierarchy(boost::property_tree::ptree &tree) +{ + flatten_configbundle_hierarchy(tree, "print"); + flatten_configbundle_hierarchy(tree, "filament"); + flatten_configbundle_hierarchy(tree, "sla_material"); + flatten_configbundle_hierarchy(tree, "printer"); +} + +// Load a config bundle file, into presets and store the loaded presets into separate files +// of the local configuration directory. +size_t PresetBundle::load_configbundle(const std::string &path, unsigned int flags) +{ + if (flags & (LOAD_CFGBNDLE_RESET_USER_PROFILE | LOAD_CFGBNDLE_SYSTEM)) + // Reset this bundle, delete user profile files if LOAD_CFGBNDLE_SAVE. + this->reset(flags & LOAD_CFGBNDLE_SAVE); + + // 1) Read the complete config file into a boost::property_tree. + namespace pt = boost::property_tree; + pt::ptree tree; + boost::nowide::ifstream ifs(path); + pt::read_ini(ifs, tree); + + const VendorProfile *vendor_profile = nullptr; + if (flags & (LOAD_CFGBNDLE_SYSTEM | LOAD_CFGBUNDLE_VENDOR_ONLY)) { + auto vp = VendorProfile::from_ini(tree, path); + if (vp.num_variants() == 0) + return 0; + vendor_profile = &(*this->vendors.insert(vp).first); + } + + if (flags & LOAD_CFGBUNDLE_VENDOR_ONLY) { + return 0; + } + + // 1.5) Flatten the config bundle by applying the inheritance rules. Internal profiles (with names starting with '*') are removed. + flatten_configbundle_hierarchy(tree); + + // 2) Parse the property_tree, extract the active preset names and the profiles, save them into local config files. + // Parse the obsolete preset names, to be deleted when upgrading from the old configuration structure. + std::vector<std::string> loaded_prints; + std::vector<std::string> loaded_filaments; + std::vector<std::string> loaded_sla_materials; + std::vector<std::string> loaded_printers; + std::string active_print; + std::vector<std::string> active_filaments; + std::string active_sla_material; + std::string active_printer; + size_t presets_loaded = 0; + for (const auto §ion : tree) { + PresetCollection *presets = nullptr; + std::vector<std::string> *loaded = nullptr; + std::string preset_name; + if (boost::starts_with(section.first, "print:")) { + presets = &this->prints; + loaded = &loaded_prints; + preset_name = section.first.substr(6); + } else if (boost::starts_with(section.first, "filament:")) { + presets = &this->filaments; + loaded = &loaded_filaments; + preset_name = section.first.substr(9); + } else if (boost::starts_with(section.first, "sla_material:")) { + presets = &this->sla_materials; + loaded = &loaded_sla_materials; + preset_name = section.first.substr(9); + } else if (boost::starts_with(section.first, "printer:")) { + presets = &this->printers; + loaded = &loaded_printers; + preset_name = section.first.substr(8); + } else if (section.first == "presets") { + // Load the names of the active presets. + for (auto &kvp : section.second) { + if (kvp.first == "print") { + active_print = kvp.second.data(); + } else if (boost::starts_with(kvp.first, "filament")) { + int idx = 0; + if (kvp.first == "filament" || sscanf(kvp.first.c_str(), "filament_%d", &idx) == 1) { + if (int(active_filaments.size()) <= idx) + active_filaments.resize(idx + 1, std::string()); + active_filaments[idx] = kvp.second.data(); + } + } else if (kvp.first == "sla_material") { + active_sla_material = kvp.second.data(); + } else if (kvp.first == "printer") { + active_printer = kvp.second.data(); + } + } + } else if (section.first == "obsolete_presets") { + // Parse the names of obsolete presets. These presets will be deleted from user's + // profile directory on installation of this vendor preset. + for (auto &kvp : section.second) { + std::vector<std::string> *dst = nullptr; + if (kvp.first == "print") + dst = &this->obsolete_presets.prints; + else if (kvp.first == "filament") + dst = &this->obsolete_presets.filaments; + else if (kvp.first == "sla_material") + dst = &this->obsolete_presets.sla_materials; + else if (kvp.first == "printer") + dst = &this->obsolete_presets.printers; + if (dst) + unescape_strings_cstyle(kvp.second.data(), *dst); + } + } else if (section.first == "settings") { + // Load the settings. + for (auto &kvp : section.second) { + if (kvp.first == "autocenter") { + } + } + } else + // Ignore an unknown section. + continue; + if (presets != nullptr) { + // Load the print, filament or printer preset. + const DynamicPrintConfig &default_config = presets->default_preset().config; + DynamicPrintConfig config(default_config); + for (auto &kvp : section.second) + config.set_deserialize(kvp.first, kvp.second.data()); + Preset::normalize(config); + // Report configuration fields, which are misplaced into a wrong group. + std::string incorrect_keys; + size_t n_incorrect_keys = 0; + for (const std::string &key : config.keys()) + if (! default_config.has(key)) { + if (incorrect_keys.empty()) + incorrect_keys = key; + else { + incorrect_keys += ", "; + incorrect_keys += key; + } + config.erase(key); + ++ n_incorrect_keys; + } + if (! incorrect_keys.empty()) + BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << + section.first << "\" contains the following incorrect keys: " << incorrect_keys << ", which were removed"; + if ((flags & LOAD_CFGBNDLE_SYSTEM) && presets == &printers) { + // Filter out printer presets, which are not mentioned in the vendor profile. + // These presets are considered not installed. + auto printer_model = config.opt_string("printer_model"); + if (printer_model.empty()) { + BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << + section.first << "\" defines no printer model, it will be ignored."; + continue; + } + auto printer_variant = config.opt_string("printer_variant"); + if (printer_variant.empty()) { + BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << + section.first << "\" defines no printer variant, it will be ignored."; + continue; + } + auto it_model = std::find_if(vendor_profile->models.cbegin(), vendor_profile->models.cend(), + [&](const VendorProfile::PrinterModel &m) { return m.id == printer_model; } + ); + if (it_model == vendor_profile->models.end()) { + BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << + section.first << "\" defines invalid printer model \"" << printer_model << "\", it will be ignored."; + continue; + } + auto it_variant = it_model->variant(printer_variant); + if (it_variant == nullptr) { + BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << + section.first << "\" defines invalid printer variant \"" << printer_variant << "\", it will be ignored."; + continue; + } + const Preset *preset_existing = presets->find_preset(section.first, false); + if (preset_existing != nullptr) { + BOOST_LOG_TRIVIAL(error) << "Error in a Vendor Config Bundle \"" << path << "\": The printer preset \"" << + section.first << "\" has already been loaded from another Confing Bundle."; + continue; + } + } + // Decide a full path to this .ini file. + auto file_name = boost::algorithm::iends_with(preset_name, ".ini") ? preset_name : preset_name + ".ini"; + auto file_path = (boost::filesystem::path(data_dir()) +#ifdef SLIC3R_PROFILE_USE_PRESETS_SUBDIR + // Store the print/filament/printer presets into a "presets" directory. + / "presets" +#else + // Store the print/filament/printer presets at the same location as the upstream Slic3r. +#endif + / presets->name() / file_name).make_preferred(); + // Load the preset into the list of presets, save it to disk. + Preset &loaded = presets->load_preset(file_path.string(), preset_name, std::move(config), false); + if (flags & LOAD_CFGBNDLE_SAVE) + loaded.save(); + if (flags & LOAD_CFGBNDLE_SYSTEM) { + loaded.is_system = true; + loaded.vendor = vendor_profile; + } + ++ presets_loaded; + } + } + + // 3) Activate the presets. + if ((flags & LOAD_CFGBNDLE_SYSTEM) == 0) { + if (! active_print.empty()) + prints.select_preset_by_name(active_print, true); + if (! active_sla_material.empty()) + sla_materials.select_preset_by_name(active_sla_material, true); + if (! active_printer.empty()) + printers.select_preset_by_name(active_printer, true); + // Activate the first filament preset. + if (! active_filaments.empty() && ! active_filaments.front().empty()) + filaments.select_preset_by_name(active_filaments.front(), true); + this->update_multi_material_filament_presets(); + for (size_t i = 0; i < std::min(this->filament_presets.size(), active_filaments.size()); ++ i) + this->filament_presets[i] = filaments.find_preset(active_filaments[i], true)->name; + this->update_compatible_with_printer(false); + } + + return presets_loaded; +} + +void PresetBundle::update_multi_material_filament_presets() +{ + if (printers.get_edited_preset().printer_technology() != ptFFF) + return; + + // Verify and select the filament presets. + auto *nozzle_diameter = static_cast<const ConfigOptionFloats*>(printers.get_edited_preset().config.option("nozzle_diameter")); + size_t num_extruders = nozzle_diameter->values.size(); + // Verify validity of the current filament presets. + for (size_t i = 0; i < std::min(this->filament_presets.size(), num_extruders); ++ i) + this->filament_presets[i] = this->filaments.find_preset(this->filament_presets[i], true)->name; + // Append the rest of filament presets. + this->filament_presets.resize(num_extruders, this->filament_presets.empty() ? this->filaments.first_visible().name : this->filament_presets.back()); + + // Now verify if wiping_volumes_matrix has proper size (it is used to deduce number of extruders in wipe tower generator): + std::vector<double> old_matrix = this->project_config.option<ConfigOptionFloats>("wiping_volumes_matrix")->values; + size_t old_number_of_extruders = int(sqrt(old_matrix.size())+EPSILON); + if (num_extruders != old_number_of_extruders) { + // First verify if purging volumes presets for each extruder matches number of extruders + std::vector<double>& extruders = this->project_config.option<ConfigOptionFloats>("wiping_volumes_extruders")->values; + while (extruders.size() < 2*num_extruders) { + extruders.push_back(extruders.size()>1 ? extruders[0] : 50.); // copy the values from the first extruder + extruders.push_back(extruders.size()>1 ? extruders[1] : 50.); + } + while (extruders.size() > 2*num_extruders) { + extruders.pop_back(); + extruders.pop_back(); + } + + std::vector<double> new_matrix; + for (unsigned int i=0;i<num_extruders;++i) + for (unsigned int j=0;j<num_extruders;++j) { + // append the value for this pair from the old matrix (if it's there): + if (i<old_number_of_extruders && j<old_number_of_extruders) + new_matrix.push_back(old_matrix[i*old_number_of_extruders + j]); + else + new_matrix.push_back( i==j ? 0. : extruders[2*i]+extruders[2*j+1]); // so it matches new extruder volumes + } + this->project_config.option<ConfigOptionFloats>("wiping_volumes_matrix")->values = new_matrix; + } +} + +void PresetBundle::update_compatible_with_printer(bool select_other_if_incompatible) +{ + const Preset &printer_preset = this->printers.get_edited_preset(); + + switch (printers.get_edited_preset().printer_technology()) { + case ptFFF: + { + const std::string &prefered_print_profile = printer_preset.config.opt_string("default_print_profile"); + const std::vector<std::string> &prefered_filament_profiles = printer_preset.config.option<ConfigOptionStrings>("default_filament_profile")->values; + prefered_print_profile.empty() ? + this->prints.update_compatible_with_printer(printer_preset, select_other_if_incompatible) : + this->prints.update_compatible_with_printer(printer_preset, select_other_if_incompatible, + [&prefered_print_profile](const std::string& profile_name){ return profile_name == prefered_print_profile; }); + prefered_filament_profiles.empty() ? + this->filaments.update_compatible_with_printer(printer_preset, select_other_if_incompatible) : + this->filaments.update_compatible_with_printer(printer_preset, select_other_if_incompatible, + [&prefered_filament_profiles](const std::string& profile_name) + { return std::find(prefered_filament_profiles.begin(), prefered_filament_profiles.end(), profile_name) != prefered_filament_profiles.end(); }); + if (select_other_if_incompatible) { + // Verify validity of the current filament presets. + this->filament_presets.front() = this->filaments.get_edited_preset().name; + for (size_t idx = 1; idx < this->filament_presets.size(); ++ idx) { + std::string &filament_name = this->filament_presets[idx]; + Preset *preset = this->filaments.find_preset(filament_name, false); + if (preset == nullptr || ! preset->is_compatible) { + // Pick a compatible profile. If there are prefered_filament_profiles, use them. + if (prefered_filament_profiles.empty()) + filament_name = this->filaments.first_compatible().name; + else { + const std::string &preferred = (idx < prefered_filament_profiles.size()) ? + prefered_filament_profiles[idx] : prefered_filament_profiles.front(); + filament_name = this->filaments.first_compatible( + [&preferred](const std::string& profile_name){ return profile_name == preferred; }).name; + } + } + } + } + } + case ptSLA: + { + const std::string &prefered_print_profile = printer_preset.config.opt_string("default_print_profile"); + const std::vector<std::string> &prefered_filament_profiles = printer_preset.config.option<ConfigOptionStrings>("default_filament_profile")->values; + prefered_print_profile.empty() ? + this->sla_materials.update_compatible_with_printer(printer_preset, select_other_if_incompatible) : + this->sla_materials.update_compatible_with_printer(printer_preset, select_other_if_incompatible, + [&prefered_print_profile](const std::string& profile_name){ return profile_name == prefered_print_profile; }); + } + } +} + +void PresetBundle::export_configbundle(const std::string &path) //, const DynamicPrintConfig &settings +{ + boost::nowide::ofstream c; + c.open(path, std::ios::out | std::ios::trunc); + + // Put a comment at the first line including the time stamp and Slic3r version. + c << "# " << Slic3r::header_slic3r_generated() << std::endl; + + // Export the print, filament and printer profiles. + for (size_t i_group = 0; i_group < 3; ++ i_group) { + const PresetCollection &presets = (i_group == 0) ? this->prints : (i_group == 1) ? this->filaments : this->printers; + for (const Preset &preset : presets()) { + if (preset.is_default || preset.is_external) + // Only export the common presets, not external files or the default preset. + continue; + c << std::endl << "[" << presets.name() << ":" << preset.name << "]" << std::endl; + for (const std::string &opt_key : preset.config.keys()) + c << opt_key << " = " << preset.config.serialize(opt_key) << std::endl; + } + } + + // Export the names of the active presets. + c << std::endl << "[presets]" << std::endl; + c << "print = " << this->prints.get_selected_preset().name << std::endl; + c << "sla_material = " << this->sla_materials.get_selected_preset().name << std::endl; + c << "printer = " << this->printers.get_selected_preset().name << std::endl; + for (size_t i = 0; i < this->filament_presets.size(); ++ i) { + char suffix[64]; + if (i > 0) + sprintf(suffix, "_%d", i); + else + suffix[0] = 0; + c << "filament" << suffix << " = " << this->filament_presets[i] << std::endl; + } + +#if 0 + // Export the following setting values from the provided setting repository. + static const char *settings_keys[] = { "autocenter" }; + c << "[settings]" << std::endl; + for (size_t i = 0; i < sizeof(settings_keys) / sizeof(settings_keys[0]); ++ i) + c << settings_keys[i] << " = " << settings.serialize(settings_keys[i]) << std::endl; +#endif + + c.close(); +} + +// Set the filament preset name. As the name could come from the UI selection box, +// an optional "(modified)" suffix will be removed from the filament name. +void PresetBundle::set_filament_preset(size_t idx, const std::string &name) +{ + if (name.find_first_of("-------") == 0) + return; + + if (idx >= filament_presets.size()) + filament_presets.resize(idx + 1, filaments.default_preset().name); + filament_presets[idx] = Preset::remove_suffix_modified(name); +} + +static inline int hex_digit_to_int(const char c) +{ + return + (c >= '0' && c <= '9') ? int(c - '0') : + (c >= 'A' && c <= 'F') ? int(c - 'A') + 10 : + (c >= 'a' && c <= 'f') ? int(c - 'a') + 10 : -1; +} + +bool PresetBundle::parse_color(const std::string &scolor, unsigned char *rgb_out) +{ + rgb_out[0] = rgb_out[1] = rgb_out[2] = 0; + if (scolor.size() != 7 || scolor.front() != '#') + return false; + const char *c = scolor.data() + 1; + for (size_t i = 0; i < 3; ++ i) { + int digit1 = hex_digit_to_int(*c ++); + int digit2 = hex_digit_to_int(*c ++); + if (digit1 == -1 || digit2 == -1) + return false; + rgb_out[i] = (unsigned char)(digit1 * 16 + digit2); + } + return true; +} + +void PresetBundle::update_platter_filament_ui(unsigned int idx_extruder, wxBitmapComboBox *ui) +{ + if (ui == nullptr || this->printers.get_edited_preset().printer_technology() == ptSLA) + return; + + unsigned char rgb[3]; + std::string extruder_color = this->printers.get_edited_preset().config.opt_string("extruder_colour", idx_extruder); + if (! parse_color(extruder_color, rgb)) + // Extruder color is not defined. + extruder_color.clear(); + + // Fill in the list from scratch. + ui->Freeze(); + ui->Clear(); + size_t selected_preset_item = 0; + const Preset *selected_preset = this->filaments.find_preset(this->filament_presets[idx_extruder]); + // Show wide icons if the currently selected preset is not compatible with the current printer, + // and draw a red flag in front of the selected preset. + bool wide_icons = selected_preset != nullptr && ! selected_preset->is_compatible && m_bitmapIncompatible != nullptr; + assert(selected_preset != nullptr); + std::map<wxString, wxBitmap*> nonsys_presets; + wxString selected_str = ""; + if (!this->filaments().front().is_visible) + ui->Append("------- " + _(L("System presets")) + " -------", wxNullBitmap); + for (int i = this->filaments().front().is_visible ? 0 : 1; i < int(this->filaments().size()); ++i) { + const Preset &preset = this->filaments.preset(i); + bool selected = this->filament_presets[idx_extruder] == preset.name; + if (! preset.is_visible || (! preset.is_compatible && ! selected)) + continue; + // Assign an extruder color to the selected item if the extruder color is defined. + std::string filament_rgb = preset.config.opt_string("filament_colour", 0); + std::string extruder_rgb = (selected && !extruder_color.empty()) ? extruder_color : filament_rgb; + bool single_bar = filament_rgb == extruder_rgb; + std::string bitmap_key = single_bar ? filament_rgb : filament_rgb + extruder_rgb; + // If the filament preset is not compatible and there is a "red flag" icon loaded, show it left + // to the filament color image. + if (wide_icons) + bitmap_key += preset.is_compatible ? ",cmpt" : ",ncmpt"; + bitmap_key += (preset.is_system || preset.is_default) ? ",syst" : ",nsyst"; + if (preset.is_dirty) + bitmap_key += ",drty"; + wxBitmap *bitmap = m_bitmapCache->find(bitmap_key); + if (bitmap == nullptr) { + // Create the bitmap with color bars. + std::vector<wxBitmap> bmps; + if (wide_icons) + // Paint a red flag for incompatible presets. + bmps.emplace_back(preset.is_compatible ? m_bitmapCache->mkclear(16, 16) : *m_bitmapIncompatible); + // Paint the color bars. + parse_color(filament_rgb, rgb); + bmps.emplace_back(m_bitmapCache->mksolid(single_bar ? 24 : 16, 16, rgb)); + if (! single_bar) { + parse_color(extruder_rgb, rgb); + bmps.emplace_back(m_bitmapCache->mksolid(8, 16, rgb)); + } + // Paint a lock at the system presets. + bmps.emplace_back(m_bitmapCache->mkclear(2, 16)); + bmps.emplace_back((preset.is_system || preset.is_default) ? *m_bitmapLock : m_bitmapCache->mkclear(16, 16)); +// (preset.is_dirty ? *m_bitmapLockOpen : *m_bitmapLock) : m_bitmapCache->mkclear(16, 16)); + bitmap = m_bitmapCache->insert(bitmap_key, bmps); + } + + if (preset.is_default || preset.is_system){ + ui->Append(wxString::FromUTF8((preset.name + (preset.is_dirty ? Preset::suffix_modified() : "")).c_str()), + (bitmap == 0) ? wxNullBitmap : *bitmap); + if (selected) + selected_preset_item = ui->GetCount() - 1; + } + else + { + nonsys_presets.emplace(wxString::FromUTF8((preset.name + (preset.is_dirty ? Preset::suffix_modified() : "")).c_str()), + (bitmap == 0) ? &wxNullBitmap : bitmap); + if (selected) + selected_str = wxString::FromUTF8((preset.name + (preset.is_dirty ? Preset::suffix_modified() : "")).c_str()); + } + if (preset.is_default) + ui->Append("------- " + _(L("System presets")) + " -------", wxNullBitmap); + } + + if (!nonsys_presets.empty()) + { + ui->Append("------- " + _(L("User presets")) + " -------", wxNullBitmap); + for (std::map<wxString, wxBitmap*>::iterator it = nonsys_presets.begin(); it != nonsys_presets.end(); ++it) { + ui->Append(it->first, *it->second); + if (it->first == selected_str) + selected_preset_item = ui->GetCount() - 1; + } + } + ui->SetSelection(selected_preset_item); + ui->SetToolTip(ui->GetString(selected_preset_item)); + ui->Thaw(); +} + +void PresetBundle::set_default_suppressed(bool default_suppressed) +{ + prints.set_default_suppressed(default_suppressed); + filaments.set_default_suppressed(default_suppressed); + sla_materials.set_default_suppressed(default_suppressed); + printers.set_default_suppressed(default_suppressed); +} + +} // namespace Slic3r |