diff options
Diffstat (limited to 'xs/src/avrdude/ChangeLog-2012')
-rw-r--r-- | xs/src/avrdude/ChangeLog-2012 | 729 |
1 files changed, 729 insertions, 0 deletions
diff --git a/xs/src/avrdude/ChangeLog-2012 b/xs/src/avrdude/ChangeLog-2012 new file mode 100644 index 000000000..bb5751a6d --- /dev/null +++ b/xs/src/avrdude/ChangeLog-2012 @@ -0,0 +1,729 @@ +2012-12-18 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * usbdefs.h (USBDEV_BULK_EP_WRITE_STK600) + (USBDEV_BULK_EP_READ_STK600): new define values + * stk500v2.c (stk600_open): use the STK600 EP values, + as they are different from AVRISPmkII + +2012-12-18 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #37942: Latest SVN can't program in dragon_jtag mode + * jtagmkII.c (jtagmkII_initialize): For Xmega devices, and + firmware >= 7.x, don't trigger a RESET, in order to work around a + firmware bug that appears to be present in at least firmware 7.24 + for the Dragon. + +2012-12-04 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * config_gram.y: Implement the "ocdrev" keyword + * avrpart.c: (Dito) + * avrpart.h: (Dito) + * lexer.l: (Dito) + * avrdude.conf.in: Add "ocdrev" key/value pairs, based + on the AS6 XML file information. + * jtag3.c: Use the ocdrev in the parameter block. + +2012-12-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtag3.c: Make jtag3_command() public + * jtag3.h: (Dito.) + * jtag3_private.h: Add two new commands + * stk500v2.c: Implement the "MonCon disable" hack that + allows temporarily falling back to ISP when trying to + talk to a part that has debugWIRE enabled + +2012-12-03 Rene Liebscher <R.Liebscher@gmx.de> + + * pickit2.c: reordered #includes for non-usb configuration + +2012-12-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtag3.c: Enable interactive adjustment of the various + clock frequencies (JTAG Xmega, JTAG megaAVR, PDI Xmega) + through the set_sck_period() callback. + +2012-12-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtag3.c: Remove unused code that was left over from + cloning the jtagmkII.c implementation + +2012-12-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * pgm_type.c: Add "jtagice3_isp" programmer hook + * avrdude.conf.in: Add "jtag3isp" programmer + * jtag3.c: jtag3_setparm() is now public + * jtag3.h: (Dito) + * stk500v2_private.h: Command 0x1D is CMD_SPI_MULTI only + for STK500v2, AVRISPmkII, and JTAGICEmkII; for JTAGICE3, + it's CMD_SET_SCK now; also add CMD_GET_SCK + * avrpart.c (avr_get_output_index): New function + * avrpart.h: (Dito) + * stk500v2.c: Implement the pasthrough programmer glue logic + for JTAGICE3 in ISP mode + * stk500v2.h: (Dito) + * avrdude.1: Document the JTAGICE3 support. + +2012-11-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtag3.c (jtag3_read_byte, jtag3_write_byte): Remove the + m->offset from addr, JTAGICE3 doesn't need it anymore (similar + to JTAGICEmkII with 7+ firmware) + * jtag3.c (jtag3_read_byte): Allow for full-page reads of + EEPROM also for Xmega and debugWIRE, allow for signature + read in debugWIRE + +2012-11-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtag3_private.h: Add two more error detail codes I stumbled + across during development + * jtag3.c: (Dito.) + * usb_libusb.c: Reduce timeouts from 100 to 10 s, still long + enough, but not getting cold feet when something goes wrong. + +2012-11-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtag3.c: Handle events returned by the ICE + * usbdevs.h: Add defines that mark an event in return + from usb_recv_frame(). + * usb_libusb.c: (Dito.) + +2012-11-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * avrdude.conf.in: Remove "has_jtag" from Xmega A4 and D4 + devices, as they only have PDI. + * jtag3.c (jtag3_page_erase): Actually implement this. + +2012-11-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #37265: wrong page sizes for XMega64xx in avrdude.conf + * avrdude.conf.in: Fix page sizes for all Xmega devices, + by cross-checking against Atmel Studio's device XML files + +2012-11-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtag3.c: Fill in the missing pieces for Xmega support (both, + PDI and JTAG). + * jtagmkII.c (jtagmkII_set_xmega_params): Use "fuse1" rather + than "fuse0" memory space to fill in the NVM offset from, as + there is no "fuse0" on some Xmega devices. + +2012-11-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * avrdude.conf.in (ATmega256RFR2, ATmega128RFR2, ATmega64RFR2): + New devices + +2012-11-28 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + First support for Atmel JTAGICE3. Guessed from USB sniffer + traces made by Knut Schwichtenberg, and by similarity to + JTAGICEmkII. + Still quite incomplete, just megaAVR/JTAG is done by now. + * jtag3.c: New file. + * jtag3.h: (Dito.) + * jtag3_private.h: (Dito.) + * pgm_type.c: Add new programmers + * avrdude.conf.in: (Dito.) + * usbdevs.h: Add new parameters + * Makefile.am: Add new files + * usb_libusb.c: Handle separate event endpoint, and larger + (USB 2.0) packet sizes + +2012-11-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtagmkII.c: Change all the USB details (endpoint numbers, + max transfer size etc.) to a per-programmer adjustable value. + * serial.h: (Dito.) + * stk500v2.c: (Dito.) + * usbdevs.h: (Dito.) + * usb_libusb.c: (Dito.) + +2012-11-20 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * buspirate.c: Replace outdated FSF postal address by a reference to + the GPL info on their website. + * jtagmkII.c: (Dito.) + * avrftdi.c: (Dito.) + * wiring.c: (Dito.) + * linux_ppdev.h: (Dito.) + * serbb.h: (Dito.) + * usbtiny.h: (Dito.) + * confwin.c: (Dito.) + * buspirate.h: (Dito.) + * avrftdi.h: (Dito.) + * wiring.h: (Dito.) + * jtagmkII.h: (Dito.) + * pickit2.c: (Dito.) + * config.c: (Dito.) + * term.c: (Dito.) + * confwin.h: (Dito.) + * avrdude.1: (Dito.) + * windows/Makefile.am: (Dito.) + * config.h: (Dito.) + * pickit2.h: (Dito.) + * term.h: (Dito.) + * tools/get-hv-params.xsl: (Dito.) + * tools/get-stk600-cards.xsl: (Dito.) + * tools/get-stk600-devices.xsl: (Dito.) + * tools/get-dw-params.xsl: (Dito.) + * butterfly.c: (Dito.) + * configure.ac: (Dito.) + * doc/Makefile.am: (Dito.) + * pgm_type.c: (Dito.) + * butterfly.h: (Dito.) + * jtagmkI.c: (Dito.) + * ft245r.c: (Dito.) + * COPYING: (Dito.) + * pgm_type.h: (Dito.) + * jtagmkI.h: (Dito.) + * pindefs.h: (Dito.) + * config_gram.y: (Dito.) + * arduino.c: (Dito.) + * arduino.h: (Dito.) + * ser_win32.c: (Dito.) + * serbb_win32.c: (Dito.) + * avr910.c: (Dito.) + * stk500.c: (Dito.) + * freebsd_ppi.h: (Dito.) + * avr910.h: (Dito.) + * solaris_ecpp.h: (Dito.) + * stk500.h: (Dito.) + * jtagmkII_private.h: (Dito.) + * avrdude.h: (Dito.) + * bitbang.c: (Dito.) + * bitbang.h: (Dito.) + * avrpart.c: (Dito.) + * safemode.c: (Dito.) + * stk500generic.c: (Dito.) + * serial.h: (Dito.) + * avrpart.h: (Dito.) + * jtagmkI_private.h: (Dito.) + * ppi.c: (Dito.) + * avr.c: (Dito.) + * safemode.h: (Dito.) + * stk500generic.h: (Dito.) + * ser_avrdoper.c: (Dito.) + * avr.h: (Dito.) + * ppi.h: (Dito.) + * usbasp.c: (Dito.) + * lists.c: (Dito.) + * stk500v2.c: (Dito.) + * my_ddk_hidsdi.h: (Dito.) + * tpi.h: (Dito.) + * usbasp.h: (Dito.) + * lists.h: (Dito.) + * stk500v2.h: (Dito.) + * ppiwin.c: (Dito.) + * fileio.c: (Dito.) + * ser_posix.c: (Dito.) + * fileio.h: (Dito.) + * serbb_posix.c: (Dito.) + * usbdevs.h: (Dito.) + * par.c: (Dito.) + * update.c: (Dito.) + * pgm.c: (Dito.) + * main.c: (Dito.) + * par.h: (Dito.) + * update.h: (Dito.) + * lexer.l: (Dito.) + * Makefile.am: (Dito.) + * pgm.h: (Dito.) + * usb_libusb.c: (Dito.) + * usbtiny.c: (Dito.) + +2012-11-13 Rene Liebscher <R.Liebscher@gmx.de> + + bug #35186 inverting pins with "~" doesn't work for pin lists (i.e. vcc) + bug #37727 Add support for LM3S811 dev board as a programmer + * lexer.l,config_gram.y: accepting inverted pins at pin lists + syntax: ~num or ~(num,num,...) + * par.c: par_set_many_bits is now usable with inverted pins + * avrftdi.c: fixed wrong index in ftdi_pin_name + * avrdude.conf.in: added programmer lm3s811 + +2012-11-04 Rene Liebscher <R.Liebscher@gmx.de> + + * lexer.l,config_gram.y,config.[hc]: changed reading of numbers to integers + except of default_bitclock which is the only real number. + No signs are allowed as negative values do not make sense for current + config values. + * buspirate.c: include own header file buspirate.h + * doc/.cvsignore: add programmers.texi to ignore list + +2012-09-06 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * doc/Makefile.am: add EXTRA_DIST, replace $(srcdir) by + $(builddir) for generated files, so "make distcheck" + works again + +2012-09-05 Rene Liebscher <R.Liebscher@gmx.de> + + * doc/Makefile.am: add $(srcdir) to name of generated files, so BSD make + find the files ( GNU make sees no difference if the + file is called version.texi or ./version.texi ) + +2012-08-15 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7184 Support for PICKit2 programmer + * Makefile.am: add pickit2 files + * pickit2.[ch]: new programmer implementation + * pgm_type.c: add pickit to list + * avrdude.1: documentation for pickit2 + * doc/avrdude.texi: documentation for pickit2 + * avrdude.conf.in: add pickit2 programmer entry + +2012-08-15 Rene Liebscher <R.Liebscher@gmx.de> + + bug #30559 Ft232 bit-bang support, see comment #30 + * ft245r.c: added semaphore workaround for MacOS X, + added pthread_testcancel in reader thread + + * configure.ac: added check for TYPE_232H in libftdi (not in libftdi < 0.20) + * avrftdi.c: do not use TYPE_232H if not declared + +2012-08-13 Hannes Weisbach <hannes_weisbach@gmx.net> + + * avrftdi.c: fixes pin_limit for different FTDI devices (there was a mixup + between 2232C and 2232H) + +2012-07-29 Hannes Weisbach <hannes_weisbach@gmx.net> + + * avrftdi.c: bugfixes (synchronisation) and maintenance (paged programming, + nicer output, separation of parameter checking and actual code) + +2012-07-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtagmkII.c (jtagmkII_memtype): return MTYPE_FLASH rather than + MTYPE_SPM for non-Xmega flash regions + +2012-07-20 Hannes Weisbach <hannes_weisbach@gmx.net> + + * avrpart.c, avrpart.h: adds avr_pin_name() + +2012-07-18 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * configure.ac: check for libelf.h also in libelf/ + * fileio.c: include <libelf/libelf.h> if configure found this + to be the case + +2012-06-13 Rene Liebscher <R.Liebscher@gmx.de> + + * configure.ac: Check for presence of <pthread.h> + * ft245r.c: Depend on HAVE_PTHREAD_H + * Makefile.am: Add -lpthread if needed. + +2012-06-07 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * usbtiny.c (usbtiny_paged_load, usbtiny_paged_write): + fix breakage introduced by the recent page handling reorg; + it used to cause an infinite loop + +2012-05-04 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Xmega page erase implementation for XPROG (AVRISPmkII, STK600) + * stk500v2.c (stk600_xprog_page_erase): New function. + +2012-05-04 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Xmega page erase implementation for JTAGICEmkII + * jtagmkII.c: Handle flash pages sizes > 256 bytes, implement + page_erase() method + * avrdude.conf.in: Change flash pagesize for all Xmega devices + to 512 bytes + * avr.c: Implement auto_erase, using page_erase if available + * avr.h: Remove unused parameters from avr_read(), replace + unused parameter in avr_write)() by auto_erase + * stk500v2.c: Handle flash page sizes > 256 bytes + * update.c (do_op): Handle new updateflags parameter + * main.c: Implement auto_erase as page_erase if possible + * update.h (enum updateflags): New enum + * pgm.h (struct programmer_t): Add page_erase method + +2012-04-26 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtagmkII.c (jtagmkII_paged_load, jtagmkII_paged_write): fix bug + in memory type calculation for Xmega "boot" memory region. + +2012-04-25 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * update.c (parse_op): do not assume default memtype here + * main.c: after locating the part information, determine default + memtype for all update options that didn't have a memtype + specified; this is "application" for Xmega parts, and "flash" for + everything else. + +2012-04-24 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * fileio.c: Rework the way ELF file sections are considered: while + scanning the program header table, the offsets from a program + header entry must never be used directly when checking the bounds + of the current AVR memory region. Instead, they must always be + checked based on the corresponding section's entry. That way, + Xmega devices now properly take into account whether the segment + fits into any of the application/apptable/boot memory region. + +2012-04-20 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #30756: When setting SUT to 64ms on XMEGA, avrdude doesn't + read device signature + * main.c: When reading the signature yields 0x000000 or 0xffffff, + retry (up to twice) after some progressive delay. + +2012-04-20 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * avrdude.conf.in (ATxmega16D4, ATxmega32D4, ATxmega64D4, + ATxmega128D4): New devices. As Xmega D doesn't feature a fuse0 + memory cell, move that one out from the generic .xmega part into + the individual Xmega A parts. + +2012-04-19 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #29019: pagel/bs2 warning when uploading using stk500 to xmega + * stk500.c (stk500_initialize): Insert dummy values for PAGEL and + BS2 if they are not present in the config file, in order to be able + to proceed with the stk500_set_extended_parms() anyway. + +2012-04-19 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * stk500v2_private.h (struct pdata): add boot_start + * stk500v2.c: For the "flash" pseudo-memory of Xmega devices, + distinguish addresses between "application" and "boot" area. + +2012-04-18 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * fileio.c (elf2b): When checking the bounds of the current + program header segment, subtract `low' from ph[n].p_paddr in order + to correct the magic section offsets for the AVR's non-flash + memory regions. + +2012-04-18 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * fileio.c (elf_get_scn): Rather than trying to just match whether + any given section maps straight to a program header segment, use a + more sophisticated decision that matches any section as long as it + fits into the segment. This is needed for situations where the + program header segment spans a larger area than the section data + provided. (This can e.g. happen in an ELF file that contains no + data at address 0, like a bootloader only.) + +2012-04-13 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #28744: Can't load bootloader to xmega128a1 (part 2, fix for + firmware >= V7.x) + * jtagmkII.c: Add firmware-version dependent handling of Xmega parameters. + V7.x firmware expects the NVM offsets being specified through the Xmega + parameters command, but left out as part of the memory address itself. + * jtagmkII_private.h: Add CMND_SET_XMEGA_PARAMS, and struct xmega_device_desc. + * config_gram.y: Add mcu_base keyword. + * avrpart.h: (Dito.) + * lexer.l: (Dito.) + * avrdude.conf.in (.xmega): add mcu_base, and data memory segment. + +2012-03-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #28744: Can't load bootloader to xmega128a1 (part 1, fix for + firmware < V7.x) + * jtagmkII.c: When going to write to the boot section of flash, + use MTYPE_BOOT_FLASH rather than MTYPE_FLASH + * jtagmkII_private.h: add MTYPE_BOOT_FLASH constant + +2012-03-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtagmkII_private.h: Sort commands, response codes and events + into numerical order. + +2012-03-29 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + bug #30451: Accessing some Xmega memory sections gives not + supported error + * stk500v2.c: Handle all Xmega memory sections (except + "prodsig" which is not documented in AVR079) + * fileio.c: Treat the "boot", "application", and "apptable" + regions (which are actually subregions of "flash") all as + being flash, i.e. suppress trailing 0xFF bytes when reading + them + * avr.c: (Dito.) + +2012-03-20 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * jtagmkII.c (jtagmkII_close): The GO command before signing off + turned out to be not required for normal megaAVR devices, and to + cause the exact opposite (i.e. the target stopping) on Xmega + devices being programmed to JTAG. However, programming Xmega + devcies through PDI *does* need the GO command. + +2012-03-20 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * configure.ac: Print a configuration summary at the end of the + configure run + +2012-02-11 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7718: Merge global data of avrftdi in a private data structure + * avrftdi.[ch]: moved global data into private data structure, moved + private defines from header file into source file + +2012-02-06 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7720 Bug in EEPROM write + * avrftdi.c: fixed wrong buffer address initialization in paged_write + * fileio.c: added #include <stdint.h> + +2012-02-05 Rene Liebscher <R.Liebscher@gmx.de> + + bug #30559 Ft232 bit-bang support + * ft245r.c: cancel reader thread before exiting program + +2012-02-04 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7717 avrftdi_flash_write is broken + * avrftdi.c: fixed wrong buffer address initialization in paged_write + bug #35296 Extraneous newlines in output. + * main.c: fixed output of newlines at 100% progress + +2012-02-03 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7715 FT4232H support + * avrdude.conf.in: added programmer 4232h + +2012-02-03 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7687: Autogenerating programmers and parts lists for docs + (generating the programmers lists) + * doc/avrdude.texi: Add include of generated table of programmers + * doc/Makefile.am: Add generating of table of programmers in programmers.texi + +2012-02-03 Rene Liebscher <R.Liebscher@gmx.de> + + bug #34768 Proposition: Change the name of the AVR32 devices + * avrdude.conf.in: renamed ucr2 to uc3a0512 + * avrpart.c: added cast to avoid compiler warning + +2012-02-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * fileio.c (fileio_elf): Fix a copy'n-paste-o. + +2012-02-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * par.c (par_desc): Move to end of file, outside the #if + HAVE_PARPORT + +2012-02-02 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Implement ELF file reading (finally). Requires libelf(3) to be + present on the host system. + * configure.ac (HAVE_LIBELF): Add logic to detect presence of + libelf(3) + * Makefile.am (avrdude_LDADD): Add @LIBELF@ + * fileio.h (FILEFMT): add FMT_ELF + * fileio.c: Implement ELF file reader. + * update.c (parse_op): add 'e' format specifier + * avrdude.1: Document the ELF file reading capability + * doc/avrdude.texi: (Dito.) + +2012-02-01 Rene Liebscher <R.Liebscher@gmx.de> + + bug #30559 Ft232 bit-bang support + * ft245r.[ch]: new programmer type implementation + * configure.ac: add pthread as link library + * avrdude.conf.in: added some new programmers + * Makefile.am: added new source files to compile + * pindefs.h: change PIN_MASK, PIN_INVERSE to highest bit of unsigned int + * pgm.[ch]: added generic function to print pin assignments (taken from par.c) + * par.c: moved pin assigment print function to pgm.c + +2012-02-01 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * lexer.l: Sort keyword tokens into alphabetic order. + +2012-01-31 Rene Liebscher <R.Liebscher@gmx.de> + + * config_gram.y, lexer.l: removed unused ID/TKN_ID definitions + * config.[hc]: removed unused function id(), use value.type to select + values + +2012-01-31 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7437 modifications to Bus Pirate module + patch #7686 Updating buspirate ascii mode to current firmware, use AUX + as clock generator, and setting of serial receive timeout + * buspirate.c: added paged_write, changed binary mode setup/detection, + added clock output on AUX pin + * avrdude.1: updated documentation + * doc/avrdude.texi: updated documentation + +2012-01-31 Rene Liebscher <R.Liebscher@gmx.de> + + Parser does not need to know all programmer types now, new programmers + will update only the table in pgm_type.c. + * config_gram.y, lexer.l: removed programmer type keywords, + use now locate_programmer_type() function + * pgm_type.[ch]: added new files for table of programmer types + * main.c: allow list of programmer types by -c ?type + * avrdude.conf.in: changed all type keywords to quoted strings + * doc/avrdude.texi: changed description of type definition, list + of valid types is now included from generated file + * doc/Makefile.am: generate list of programmer types for doc + * all programmers [hc]: add xxx_desc string for description of programmer + +2012-01-30 Rene Liebscher <R.Liebscher@gmx.de> + + * configure.ac: fixed detection of yylex_destroy availability + by checking the version number of flex; bump required autoconf + version to 2.60 (for AC_PROG_SED) + +2012-01-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * lexer.l: Replace the old, now-defunct #define YY_NO_UNPUT by + the new %option nounput. This gets rid of a compiler warning. + +2012-01-30 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Add a connection_type attribute to each programmer, rather than + trying to hard-code the default port name in main.c. + * pgm.h: Add conntype to struct pgm. + * lexer.l: Extend grammar for connection_type. + * config_gram.y: (Dito.) + * config.h: Add DEFAULT_USB, for symmetry with default_parallel + and default_serial. + * main.c: Replace old default portname hack by avrdude.conf-based + knowledge. + * usbtiny.c: Drop an old hack that's no longer necessary. + * avrdude.conf.in: Add connection_type to each programmer + definition. + +2012-01-27 Rene Liebscher <R.Liebscher@gmx.de> + + * avrdude.conf.in: used parent parts for some other parts, added + abstract .xmega part as parent for xmegas + * main.c: hide parts starting with '.' from parts list + +2012-01-22 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7688: Implement parent programmers feature + * avrdude.conf.in: updated documentation comment and some programmers + have now parents + * config_gram.y: initpgm will now called at first use of programmer + in main. parser sets only the function pointer in the pgm structure. + Pin and pin lists definitions can now be empty to remove the parents + setting. + * doc/avrdude.texi: updated documentation + * main.c: added call to pgm->initpgm after locate_programmer + * pgm.[hc]: added field initpgm in structure, added function pgm_dup + +2012-01-21 Rene Liebscher <R.Liebscher@gmx.de> + + bug #21797: AT90PWM316: New part description + * avrdude.conf.in: added pwm316 with parent pwm3b but 16KB flash + +2012-01-20 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + * configure.ac: Check for presence of lusb_usb.h as an alternative + to usb.h; libusb-win32 switched to this name in version 1.2.5.0. + * avrftdi.c: Decide whether to include <usb.h>, or <lusb0_usb.h>. + * ser_avrdoper.c: (Dito.) + * usbasp.c: (Dito.) + * usb_libusb.c: (Dito.) + * usbtiny.c: (Dito.) + +2012-01-19 Rene Liebscher <R.Liebscher@gmx.de> + + * avr.c: Unsigned variable was used for return code of paged_write/load + functions. So a negative return code led never to a fallback to byte + functions. + +2012-01-17 Rene Liebscher <R.Liebscher@gmx.de> + + bug #34302: Feature request : device configuration with parent classes + * config_gram.y: if memory section is overwritten old entry is removed + + (not in original patch) + * config_gram.y: if programmer or part is defined twice, a warning is + output and the first instance is removed + + General cleanup and free functions, so valgrind does not report any lost + blocks at program end. + * avrpart.[hc]: added avr_free_(opcode|mem|part) functions + * pgm.[hc]: added pgm_free function + * update.[hc]: added free_update functions + * config.[hc]: added cleanup_config function, use yylex_destroy to reset + the lexer after usage. (So it can be reused.) + * main.c: add cleanup_main function which is called by atexit() (This + frees all lists so that at program exit only really lost memory is + reported by valgrind.) + * usbasp.c: added libusb_free_device_list() and libusb_exit() calls to + avoid lost memory + * buspirate.c: moved memory allocation from initpgm to setup and added + free in teardown + * configure.ac: add definition of HAVE_YYLEX_DESTROY if $LEX is flex. + * Makefile.am: added . in front of SUBDIRS to build avrdude before trying + to use it for creating the part list for the docs. + +2012-01-17 Rene Liebscher <R.Liebscher@gmx.de> + + * usbasp.c: USB vid/pid/vendor/product from config file are used, for + id "usbasp" nibobee and old usbasp are tried as they were currently + implemented within usbasp + * avrdude.conf.in: added usb params to "usbasp", added new entry "nibobee" + with params which were hardcoded in usbasp.c, and added an entry + "usbasb-clone" which only checks vid/pid. + +2012-01-10 Rene Liebscher <R.Liebscher@gmx.de> + + bug #35261 avrftdi uses wrong interface in avrftdi_paged_(write|load) + * avrftdi.c: Fixed interface and implementation of avrftdi_paged_(write|load) + patch #7672 adding support for O-Link (FTDI based JTAG) as programmer + * avrdude.conf.in: added o-link entry + +2012-01-10 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7699 Read additional config files + * main.c: Added reading of additional config files + * avrdude.1: updated man page + * doc/avrdude.texi: updated documentation + +2012-01-10 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Submitted by Bob Frazier: + bug #35208: avrdude 5.11 on freebsd 8.2-STABLE does not reset + Arduino Uno properly + * arduino.c (arduino_open): Bump the timeout between pulling + the DTR and RTS lines low and high. + +2012-01-08 Rene Liebscher <R.Liebscher@gmx.de> + + Fixed following findings reported by cppcheck + * avr910.c:625 (error) Possible null pointer dereference: cmd - otherwise it is redundant to check if cmd is null at line 624 + * avr910.c:626 (error) Possible null pointer dereference: cmd - otherwise it is redundant to check if cmd is null at line 624 + * avr910.c:168 (information) The scope of the variable 'devtype_1st' can be reduced + * avr910.c:169 (information) The scope of the variable 'dev_supported' can be reduced + * avrftdi.c:647 (error) Using sizeof for array given as function argument returns the size of pointer. + * stk500v2.c:3347 (error) Memory leak: b + * stk500v2.c:3452 (error) Memory leak: b + * usbasp.c:554 (error) Using sizeof for array given as function argument returns the size of pointer. + * usbasp.c:485 (information) The scope of the variable 'dly' can be reduced + +2012-01-03 Joerg Wunsch <j.gnu@uriah.heep.sax.de> + + Reported by Jason Kotzin: + * usbasp.c (usbasp_spi_paged_load, usbasp_spi_paged_write): + Fix buffer address calculation. + +2012-01-03 Rene Liebscher <R.Liebscher@gmx.de> + + patch #7629 add support for atmega48p + * avrdude.conf.in: Added m48p with parent m48 + different signature + + * avrdude.conf.in: made part parents (m88p = m88 + different signature, + m168p = m168 + different signature) + +2012-01-02 Rene Liebscher <R.Liebscher@gmx.de> + + bug #21663 AT90PWM efuse incorrect + bug #30438 efuse bits written as 0 on at90pwmxx parts + * avrdude.conf.in: (pwm2, pwm2b, pwm3, pwm3b) <efuse.write>: Write + eight bits + + * avrdude.conf.in: made part parents (pwm3 = pwm2, pwm3b = pwm2b, + pwm2b = pwm2 + different signature) + + * ChangeLog-2011: New file, rotate ChangeLog for new year. |