fix some vertex errors and warnings

2 files changed, 3 insertions, 4 deletions

diff --git a/Vertex.idx b/Vertex.idx
index ccb543b..0919165 100644
--- a/Vertex.idx
+++ b/Vertex.idx
@@ -1,4 +1,5 @@
 min_slic3r_version = 2.3.0-rc1
+0.1.13 fix errors & warnings
 0.1.12 The changelog URL has been updated
 0.1.11 Fixed the VERTEX MINI printer model
 0.1.10 Added the movement to Z 0.20 before start to print
diff --git a/Vertex.ini b/Vertex.ini
index fb21cb1..7f2c277 100644
--- a/Vertex.ini
+++ b/Vertex.ini
@@ -2651,7 +2651,7 @@ bridge_fan_speed = 25
 compatible_printers_condition = printer_model=="VERTEX_MINI" and nozzle_diameter[0]!=0.8 
 
 [filament:Fiberthree F3 PA Pure Pro @VERTEXMINI]
-inherits = *common*
+inherits = *common_vertex*
 filament_vendor = Fiberthree
 filament_cost = 165.98
 filament_density = 1.2
@@ -2676,7 +2676,7 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and no
 compatible_printers_condition = printer_model=="VERTEX_MINI"
 
 [filament:Fiberthree F3 PA-CF Pro @VERTEXMINI]
-inherits = *common*
+inherits = *common_vertex*
 filament_vendor = Fiberthree
 filament_cost = 171.98
 filament_density = 1.25
@@ -3590,7 +3590,6 @@ default_filament_profile = Prusament PLA @VERTEXMMU2
 
 [printer:VERTEX MK3S & MK3S+ MMU2S Single]
 inherits = *mm2s*
-renamed_from = "VERTEX MK3S MMU2S Single"
 single_extruder_multi_material = 0
 default_filament_profile = Prusament PLA @VERTEX
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
@@ -3598,7 +3597,6 @@ end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10,
 
 [printer:VERTEX MK3S & MK3S+ MMU2S Single 0.6 nozzle]
 inherits = VERTEX MK3S & MK3S+ MMU2S Single
-renamed_from = "VERTEX MK3S MMU2S Single 0.6 nozzle"
 single_extruder_multi_material = 0
 nozzle_diameter = 0.6
 max_layer_height = 0.40