merge changes from prusaslicer 2.3.2

also fix some values

34 files changed, 2600 insertions, 497 deletions

diff --git a/Anycubic.idx b/Anycubic.idx
index dc2b104..23010e2 100644
--- a/Anycubic.idx
+++ b/Anycubic.idx
@@ -1,4 +1,5 @@
 min_slic3r_version = 2.3.1-beta
+0.0.10 Various updates for Anycubic Mega. Added filament profiles.
 0.0.10-susi superslicer adaptations
 0.0.9 Updated bed textures
 min_slic3r_version = 2.3.0-beta2
diff --git a/Anycubic.ini b/Anycubic.ini
index 0c001e2..0800793 100644
--- a/Anycubic.ini
+++ b/Anycubic.ini
@@ -5,7 +5,7 @@
 name = Anycubic
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.10-susi
+config_version = 0.0.10
 # Where to get the updates from?
 config_update_url = 
 #https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anycubic/
@@ -140,7 +140,9 @@ support_material_interface_extruder = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_enforce_layers = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15
 support_material_interface_contact_loops = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
@@ -435,17 +437,17 @@ default_filament_profile = Generic PLA @AKOSSEL
 inherits = *common_akossel*
 printer_model = AKLP
 printer_variant = 0.4
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AKLP\nPRINTER_HAS_BOWDEN\n
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AKLP\nPRINTER_HAS_BOWDEN\n
 bed_shape = 114.562x10.0229,113.253x19.9695,111.081x29.7642,108.065x39.3323,104.225x48.6011,99.5929x57.5,94.2025x65.9613,88.0951x73.9206,81.3173x81.3173,73.9206x88.0951,65.9613x94.2025,57.5x99.5929,48.6011x104.225,39.3323x108.065,29.7642x111.081,19.9695x113.253,10.0229x114.562,7.04172e-15x115,-10.0229x114.562,-19.9695x113.253,-29.7642x111.081,-39.3323x108.065,-48.6011x104.225,-57.5x99.5929,-65.9613x94.2025,-73.9206x88.0951,-81.3173x81.3173,-88.0951x73.9206,-94.2025x65.9613,-99.5929x57.5,-104.225x48.6011,-108.065x39.3323,-111.081x29.7642,-113.253x19.9695,-114.562x10.0229,-115x1.40834e-14,-114.562x-10.0229,-113.253x-19.9695,-111.081x-29.7642,-108.065x-39.3323,-104.225x-48.6011,-99.5929x-57.5,-94.2025x-65.9613,-88.0951x-73.9206,-81.3173x-81.3173,-73.9206x-88.0951,-65.9613x-94.2025,-57.5x-99.5929,-48.6011x-104.225,-39.3323x-108.065,-29.7642x-111.081,-19.9695x-113.253,-10.0229x-114.562,-2.11252e-14x-115,10.0229x-114.562,19.9695x-113.253,29.7642x-111.081,39.3323x-108.065,48.6011x-104.225,57.5x-99.5929,65.9613x-94.2025,73.9206x-88.0951,81.3173x-81.3173,88.0951x-73.9206,94.2025x-65.9613,99.5929x-57.5,104.225x-48.6011,108.065x-39.3323,111.081x-29.7642,113.253x-19.9695,114.562x-10.0229,115x-2.81669e-14
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home\nG1 X-54.672 Y95.203 Z0.3 F9000\nG92 E0.0\nG1 F1000\nG1 X-52.931 Y96.185 E0.300\nG1 X-50.985 Y97.231 E0.331\nG1 X-49.018 Y98.238 E0.331\nG1 X-47.032 Y99.205 E0.331\nG1 X-45.026 Y100.132 E0.331\nG1 X-43.003 Y101.019 E0.331\nG1 X-40.961 Y101.864 E0.331\nG1 X-38.904 Y102.668 E0.331\nG1 X-36.83 Y103.431 E0.331\nG1 X-34.742 Y104.152 E0.331\nG1 X-32.639 Y104.83 E0.331\nG1 X-30.523 Y105.466 E0.331\nG1 X-28.395 Y106.06 E0.331\nG1 X-26.255 Y106.61 E0.331\nG1 X-24.105 Y107.117 E0.331\nG1 X-21.945 Y107.581 E0.331\nG1 X-19.776 Y108.001 E0.331\nG1 X-17.599 Y108.377 E0.331\nG1 X-15.415 Y108.71 E0.331\nG1 X-13.224 Y108.998 E0.331\nG1 X-11.028 Y109.242 E0.331\nG1 X-8.828 Y109.442 E0.331\nG1 X-6.624 Y109.598 E0.331\nG1 X-4.418 Y109.709 E0.331\nG1 X-2.209 Y109.776 E0.332\nG1 X0 Y109.798 E0.331\nG1 X2.209 Y109.776 E0.690\nG1 X4.418 Y109.709 E0.691\nG1 X6.624 Y109.598 E0.690\nG1 X8.828 Y109.442 E0.690\nG1 X11.028 Y109.242 E0.690\nG1 X13.224 Y108.998 E0.690\nG1 X15.415 Y108.71 E0.691\nG1 X17.599 Y108.377 E0.690\nG1 X19.776 Y108.001 E0.690\nG1 X21.945 Y107.581 E0.690\nG1 X24.105 Y107.117 E0.690\nG1 X26.255 Y106.61 E0.690\nG1 X28.395 Y106.06 E0.690\nG1 X30.523 Y105.466 E0.690\nG1 X32.639 Y104.83 E0.690\nG1 X34.742 Y104.152 E0.690\nG1 X36.83 Y103.431 E0.690\nG1 X38.904 Y102.668 E0.691\nG1 X40.961 Y101.864 E0.690\nG1 X43.003 Y101.019 E0.691\nG1 X45.026 Y100.132 E0.690\nG1 X47.032 Y99.205 E0.691\nG1 X49.018 Y98.238 E0.690\nG1 X50.985 Y97.231 E0.691\nG1 X52.931 Y96.185 E0.690\nG1 X54.672 Y95.203 E0.625\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y96.185 F1000 ; wipe\nG1 X50.985 Y97.231 F1000 ; wipe\nG1 X49.018 Y98.238 F1000 ; wipe\nG1 X0 Y109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 ; home\nG1 X-54.672 Y95.203 Z0.3 F9000\nG92 E0.0\nG1 F1000\nG1 X-52.931 Y96.185 E0.300\nG1 X-50.985 Y97.231 E0.331\nG1 X-49.018 Y98.238 E0.331\nG1 X-47.032 Y99.205 E0.331\nG1 X-45.026 Y100.132 E0.331\nG1 X-43.003 Y101.019 E0.331\nG1 X-40.961 Y101.864 E0.331\nG1 X-38.904 Y102.668 E0.331\nG1 X-36.83 Y103.431 E0.331\nG1 X-34.742 Y104.152 E0.331\nG1 X-32.639 Y104.83 E0.331\nG1 X-30.523 Y105.466 E0.331\nG1 X-28.395 Y106.06 E0.331\nG1 X-26.255 Y106.61 E0.331\nG1 X-24.105 Y107.117 E0.331\nG1 X-21.945 Y107.581 E0.331\nG1 X-19.776 Y108.001 E0.331\nG1 X-17.599 Y108.377 E0.331\nG1 X-15.415 Y108.71 E0.331\nG1 X-13.224 Y108.998 E0.331\nG1 X-11.028 Y109.242 E0.331\nG1 X-8.828 Y109.442 E0.331\nG1 X-6.624 Y109.598 E0.331\nG1 X-4.418 Y109.709 E0.331\nG1 X-2.209 Y109.776 E0.332\nG1 X0 Y109.798 E0.331\nG1 X2.209 Y109.776 E0.690\nG1 X4.418 Y109.709 E0.691\nG1 X6.624 Y109.598 E0.690\nG1 X8.828 Y109.442 E0.690\nG1 X11.028 Y109.242 E0.690\nG1 X13.224 Y108.998 E0.690\nG1 X15.415 Y108.71 E0.691\nG1 X17.599 Y108.377 E0.690\nG1 X19.776 Y108.001 E0.690\nG1 X21.945 Y107.581 E0.690\nG1 X24.105 Y107.117 E0.690\nG1 X26.255 Y106.61 E0.690\nG1 X28.395 Y106.06 E0.690\nG1 X30.523 Y105.466 E0.690\nG1 X32.639 Y104.83 E0.690\nG1 X34.742 Y104.152 E0.690\nG1 X36.83 Y103.431 E0.690\nG1 X38.904 Y102.668 E0.691\nG1 X40.961 Y101.864 E0.690\nG1 X43.003 Y101.019 E0.691\nG1 X45.026 Y100.132 E0.690\nG1 X47.032 Y99.205 E0.691\nG1 X49.018 Y98.238 E0.690\nG1 X50.985 Y97.231 E0.691\nG1 X52.931 Y96.185 E0.690\nG1 X54.672 Y95.203 E0.625\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y96.185 F1000 ; wipe\nG1 X50.985 Y97.231 F1000 ; wipe\nG1 X49.018 Y98.238 F1000 ; wipe\nG1 X0 Y109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\nM221 S{if layer_height<0.075}100{else}95{endif}
 
 [printer:Anycubic Kossel Pulley (Linear)]
 inherits = *common_akossel*
 printer_model = AK
 printer_variant = 0.4
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AK\nPRINTER_HAS_BOWDEN\n
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Anycubic\nPRINTER_MODEL_AK\nPRINTER_HAS_BOWDEN\n
 bed_shape = 89.6575x7.84402,88.6327x15.6283,86.9333x23.2937,84.5723x30.7818,81.5677x38.0356,77.9423x45,73.7237x51.6219,68.944x57.8509,63.6396x63.6396,57.8509x68.944,51.6219x73.7237,45x77.9423,38.0356x81.5677,30.7818x84.5723,23.2937x86.9333,15.6283x88.6327,7.84402x89.6575,5.51091e-15x90,-7.84402x89.6575,-15.6283x88.6327,-23.2937x86.9333,-30.7818x84.5723,-38.0356x81.5677,-45x77.9423,-51.6219x73.7237,-57.8509x68.944,-63.6396x63.6396,-68.944x57.8509,-73.7237x51.6219,-77.9423x45,-81.5677x38.0356,-84.5723x30.7818,-86.9333x23.2937,-88.6327x15.6283,-89.6575x7.84402,-90x1.10218e-14,-89.6575x-7.84402,-88.6327x-15.6283,-86.9333x-23.2937,-84.5723x-30.7818,-81.5677x-38.0356,-77.9423x-45,-73.7237x-51.6219,-68.944x-57.8509,-63.6396x-63.6396,-57.8509x-68.944,-51.6219x-73.7237,-45x-77.9423,-38.0356x-81.5677,-30.7818x-84.5723,-23.2937x-86.9333,-15.6283x-88.6327,-7.84402x-89.6575,-1.65327e-14x-90,7.84402x-89.6575,15.6283x-88.6327,23.2937x-86.9333,30.7818x-84.5723,38.0356x-81.5677,45x-77.9423,51.6219x-73.7237,57.8509x-68.944,63.6396x-63.6396,68.944x-57.8509,73.7237x-51.6219,77.9423x-45,81.5677x-38.0356,84.5723x-30.7818,86.9333x-23.2937,88.6327x-15.6283,89.6575x-7.84402,90x-2.20436e-14
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home\nG1 X-39.672 Y69.712 Z0.3 F9000\nG92 E0.0\nG1 F1000\nG1 X-38.457 Y70.397 E0.209\nG1 X-37.043 Y71.157 E0.241\nG1 X-35.614 Y71.889 E0.241\nG1 X-34.171 Y72.591 E0.241\nG1 X-32.714 Y73.265 E0.241\nG1 X-31.244 Y73.909 E0.241\nG1 X-29.761 Y74.523 E0.241\nG1 X-28.266 Y75.108 E0.241\nG1 X-26.759 Y75.662 E0.241\nG1 X-25.242 Y76.185 E0.241\nG1 X-23.714 Y76.678 E0.241\nG1 X-22.177 Y77.14 E0.241\nG1 X-20.63 Y77.571 E0.241\nG1 X-19.076 Y77.971 E0.241\nG1 X-17.514 Y78.34 E0.241\nG1 X-15.944 Y78.677 E0.241\nG1 X-14.368 Y78.982 E0.241\nG1 X-12.786 Y79.255 E0.241\nG1 X-11.199 Y79.497 E0.241\nG1 X-9.608 Y79.706 E0.241\nG1 X-8.013 Y79.884 E0.241\nG1 X-6.414 Y80.029 E0.241\nG1 X-4.813 Y80.142 E0.241\nG1 X-3.21 Y80.223 E0.241\nG1 X-1.605 Y80.271 E0.241\nG1 X0 Y80.287 E0.241\nG1 X1.605 Y80.271 E0.502\nG1 X3.21 Y80.223 E0.502\nG1 X4.813 Y80.142 E0.502\nG1 X6.414 Y80.029 E0.502\nG1 X8.013 Y79.884 E0.502\nG1 X9.608 Y79.706 E0.502\nG1 X11.199 Y79.497 E0.501\nG1 X12.786 Y79.255 E0.502\nG1 X14.368 Y78.982 E0.502\nG1 X15.944 Y78.677 E0.502\nG1 X17.514 Y78.34 E0.502\nG1 X19.076 Y77.971 E0.502\nG1 X20.63 Y77.571 E0.501\nG1 X22.177 Y77.14 E0.502\nG1 X23.714 Y76.678 E0.502\nG1 X25.242 Y76.185 E0.502\nG1 X26.759 Y75.662 E0.501\nG1 X28.266 Y75.108 E0.502\nG1 X29.761 Y74.523 E0.502\nG1 X31.244 Y73.909 E0.502\nG1 X32.714 Y73.265 E0.502\nG1 X34.171 Y72.591 E0.502\nG1 X35.614 Y71.889 E0.501\nG1 X37.043 Y71.157 E0.502\nG1 X38.457 Y70.397 E0.502\nG1 X39.672 Y69.712 E0.436\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 ; home\nG1 X-39.672 Y69.712 Z0.3 F9000\nG92 E0.0\nG1 F1000\nG1 X-38.457 Y70.397 E0.209\nG1 X-37.043 Y71.157 E0.241\nG1 X-35.614 Y71.889 E0.241\nG1 X-34.171 Y72.591 E0.241\nG1 X-32.714 Y73.265 E0.241\nG1 X-31.244 Y73.909 E0.241\nG1 X-29.761 Y74.523 E0.241\nG1 X-28.266 Y75.108 E0.241\nG1 X-26.759 Y75.662 E0.241\nG1 X-25.242 Y76.185 E0.241\nG1 X-23.714 Y76.678 E0.241\nG1 X-22.177 Y77.14 E0.241\nG1 X-20.63 Y77.571 E0.241\nG1 X-19.076 Y77.971 E0.241\nG1 X-17.514 Y78.34 E0.241\nG1 X-15.944 Y78.677 E0.241\nG1 X-14.368 Y78.982 E0.241\nG1 X-12.786 Y79.255 E0.241\nG1 X-11.199 Y79.497 E0.241\nG1 X-9.608 Y79.706 E0.241\nG1 X-8.013 Y79.884 E0.241\nG1 X-6.414 Y80.029 E0.241\nG1 X-4.813 Y80.142 E0.241\nG1 X-3.21 Y80.223 E0.241\nG1 X-1.605 Y80.271 E0.241\nG1 X0 Y80.287 E0.241\nG1 X1.605 Y80.271 E0.502\nG1 X3.21 Y80.223 E0.502\nG1 X4.813 Y80.142 E0.502\nG1 X6.414 Y80.029 E0.502\nG1 X8.013 Y79.884 E0.502\nG1 X9.608 Y79.706 E0.502\nG1 X11.199 Y79.497 E0.501\nG1 X12.786 Y79.255 E0.502\nG1 X14.368 Y78.982 E0.502\nG1 X15.944 Y78.677 E0.502\nG1 X17.514 Y78.34 E0.502\nG1 X19.076 Y77.971 E0.502\nG1 X20.63 Y77.571 E0.501\nG1 X22.177 Y77.14 E0.502\nG1 X23.714 Y76.678 E0.502\nG1 X25.242 Y76.185 E0.502\nG1 X26.759 Y75.662 E0.501\nG1 X28.266 Y75.108 E0.502\nG1 X29.761 Y74.523 E0.502\nG1 X31.244 Y73.909 E0.502\nG1 X32.714 Y73.265 E0.502\nG1 X34.171 Y72.591 E0.502\nG1 X35.614 Y71.889 E0.501\nG1 X37.043 Y71.157 E0.502\nG1 X38.457 Y70.397 E0.502\nG1 X39.672 Y69.712 E0.436\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 
 ## Anycubic MEGA ZERO
 ## Author: https://github.com/kad
@@ -521,7 +523,9 @@ support_material_interface_extruder = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_enforce_layers = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15
 support_material_interface_contact_loops = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
@@ -764,7 +768,7 @@ retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 30
 single_extruder_multi_material = 0
-start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S[first_layer_temperature]\n ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature]\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n
+start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\n ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n
 end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM140 S0 ; turn off heatbed\nM107 ; Fan off\nM84 ; disable motors\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n
 toolchange_gcode =
 use_firmware_retraction = 0
@@ -783,7 +787,7 @@ printer_model = MEGA0
 printer_variant = 0.4
 max_layer_height = 0.3
 min_layer_height = 0.1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_MEGA0
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_MEGA0
 bed_shape = 0x0,220x0,220x220,0x220
 max_print_height = 250
 machine_max_acceleration_e = 5000
@@ -812,7 +816,7 @@ deretract_speed = 30
 retract_before_wipe = 70%
 default_print_profile = 0.20mm NORMAL @MEGA0
 default_filament_profile = Anycubic PLA @MEGA0
-start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S[first_layer_temperature]\n ; set extruder temp\nM109 S[first_layer_temperature]\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n
+start_gcode = G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nM117 Homing X/Y ...\nG28 X0 Y0 ;move X/Y to min endstops\nM117 Homing Z ...\nG28 Z0 ;move Z to min endstops\nG1 Z15.0 F240 ;move the platform down 15mm\nM117 Heating ...\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\n ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\n ; wait for extruder temp\nM117 Start cleaning ...\nG92 E0 ;zero the extruded length\nG1 F200 E10 ;extrude 10mm of feed stock\nG92 E0 ;zero the extruded length again\nM117 Intro line ...\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z[first_layer_height] F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z[first_layer_height] F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z[first_layer_height] F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3[first_layer_height] F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 E-1 F500 ; Retract filiment by 1 mm\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F240 ; Move over to prevent blob squish\nG92 E0 ; Reset Extruder\nM117 Printing...\n
 end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM107 ; Fan off\nM84 ; disable motors\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-5 ;X-20 Y-20 F240 ;move Z up a bit and retract filament even more\nG28 X0 ;move X to min endstops, so the head is out of the way\nG90 ;Absolute positionning\nG1 Y200 F3000 ;Present print\nM84 ;steppers off\nM300 P300 S4000\nM117 Finished.\n
 
 ## Anycubic i3 Mega and i3 Mega S
@@ -821,54 +825,64 @@ end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM107 ; Fan off\nM
 
 [print:*common_mega*]
 bottom_solid_min_thickness = 0.5
-bridge_acceleration = 1800
-bridge_flow_ratio = 80%
+bridge_acceleration = 1000
+bridge_flow_ratio = 95%
 bridge_speed = 30
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/  and nozzle_diameter[0]==0.4
-default_acceleration = 1800
+default_acceleration = 1000
 ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 40
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
 extruder_clearance_height = 35
 extruder_clearance_radius = 60
 extrusion_width = 0.45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1800
+first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.42
 first_layer_height = 0.2
+first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 1
-infill_acceleration = 1800
+infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_extrusion_width = 0.45
-infill_speed = 60
+max_print_speed = 200
+min_skirt_length = 4
 only_retract_when_crossing_perimeters = 0
-output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
-perimeter_acceleration = 1800
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeter_acceleration = 800
 perimeter_extrusion_width = 0.45
+perimeter_speed = 45
 perimeters = 2
 seam_position = nearest
-skirts = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
 slice_closing_radius = 0.05
-small_perimeter_speed = 30
 solid_infill_below_area = 0
-solid_infill_speed = 60
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 80
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.1
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.1
+support_material_contact_distance_bottom = 0.1
 support_material_extrusion_width = 0.35
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_spacing = 2
+support_material_speed = 50
 support_material_threshold = 55
-support_material_with_sheath = 0
 thin_walls = 0
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 40
+top_solid_layers = 5
 top_solid_min_thickness = 0.6
 travel_speed = 180
 
 [print:*supported_mega*]
-raft_layers = 2
 support_material = 1
 
 # XXXXXXXXXXXXXXXXXXXX
@@ -910,7 +924,19 @@ inherits = *0.20mm_mega*;*supported_mega*
 [print:*0.30mm_mega*]
 inherits = *common_mega*
 bottom_solid_layers = 4
-bridge_flow_ratio = 95%
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 35
+extrusion_width = 0.5
+fill_pattern = grid
+infill_extrusion_width = 0.5
+infill_speed = 85
+layer_height = 0.3
+perimeter_extrusion_width = 0.5
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_extrusion_width = 0.5
+support_material_extrusion_width = 0.38
+support_material_speed = 45
 top_solid_layers = 4
 
 [print:0.30mm DRAFT @MEGA]
@@ -940,13 +966,13 @@ slowdown_below_layer_time = 20
  cooling = 0
  fan_always_on = 0
  fan_below_layer_time = 20
- filament_colour = #FFF2EC
+ filament_colour = #3A80CA
  filament_cost = 27.82
  filament_density = 1.04
  filament_max_volumetric_speed = 11
  filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
  filament_type = ABS
- first_layer_bed_temperature = 100
+ first_layer_bed_temperature = 105
  first_layer_temperature = 255
  max_fan_speed = 30
  min_fan_speed = 20
@@ -954,14 +980,14 @@ slowdown_below_layer_time = 20
 
 [filament:Generic ABS @MEGA]
 inherits = *ABS_mega*
- 
+
 [filament:*FLEX_mega*]
 inherits = *common_mega*
 bed_temperature = 50
 bridge_fan_speed = 80
 cooling = 0
 extrusion_multiplier = 1.15
-fan_always_on = 0 
+fan_always_on = 0
 filament_colour = #008000
 filament_cost = 82.00
 filament_density = 1.22
@@ -969,7 +995,7 @@ filament_deretract_speed = 25
 filament_max_volumetric_speed = 1.2
 filament_retract_length = 0.8
 filament_type = FLEX
-first_layer_bed_temperature = 50
+first_layer_bed_temperature = 55
 first_layer_temperature = 240
 max_fan_speed = 90
 min_fan_speed = 70
@@ -978,16 +1004,41 @@ temperature = 240
 [filament:Generic FLEX @MEGA]
 inherits = *FLEX_mega*
 
+[filament:SainSmart TPU @MEGA]
+inherits = *FLEX_mega*
+filament_vendor = SainSmart
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 4
+filament_cost = 39.99
+filament_density = 1.21
+filament_deretract_speed = 15
+filament_max_volumetric_speed = 1.8
+filament_notes = "SainSmart TPU gains popularity among 3D Printing community for its balance of rigidity and flexibility. In addition, with a 95A Shore Hardness and improved bed adhesion, it is easier to print even with a stock elementary 3D Printer like the Creality Ender 3. SainSmart TPU will not disappoint if you are looking for flexible filament. From drone parts, phone cases, to small toys, all can be printed with ease.\n\nhttps://www.sainsmart.com/collections/tpu-filament/products/all-colors-tpu-flexible-filament-1-75mm-0-8kg-1-76lb"
+filament_retract_before_travel = 5
+filament_retract_length = 4
+filament_retract_speed = 40
+filament_unloading_speed = 90
+first_layer_bed_temperature = 55
+first_layer_temperature = 235
+full_fan_speed_layer = 6
+max_fan_speed = 80
+min_fan_speed = 80
+slowdown_below_layer_time = 10
+temperature = 235
+
 [filament:*PETG_mega*]
 inherits = *common_mega*
 bed_temperature = 90
 bridge_fan_speed = 50
 fan_below_layer_time = 20
+filament_colour = #FF8000
 filament_cost = 27.82
 filament_density = 1.27
 filament_max_volumetric_speed = 8
 filament_type = PETG
-first_layer_bed_temperature = 85
+first_layer_bed_temperature = 90
 first_layer_temperature = 230
 max_fan_speed = 50
 min_fan_speed = 30
@@ -996,14 +1047,63 @@ temperature = 240
 [filament:Generic PETG @MEGA]
 inherits = *PETG_mega*
 
+[filament:ColorFabb XT-CF20 @MEGA]
+inherits = *PETG_mega*
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/
+extrusion_multiplier = 1.05
+filament_colour = #804040
+filament_cost = 66.60
+filament_density = 1.35
+filament_deretract_speed = 25
+filament_max_volumetric_speed = 2
+filament_notes = "Based on colorFabb_XT, XT-CF20 is a carbon fiber composite material. Loaded with no less than 20% specially sourced carbon fibers we have developed a very stiff and tough 3D printing filament made for functional parts. It is truly a professional printers go-to material, especially for users looking for high melt strength, high melt viscosity and good dimensional accuracy and stability.\n\nhttps://colorfabb.com/xt-cf20"
+filament_retract_before_travel = 1
+filament_retract_length = 1.4
+filament_retract_speed = 40
+filament_spool_weight = 236
+filament_vendor = ColorFabb
+first_layer_temperature = 260
+full_fan_speed_layer = 5
+slowdown_below_layer_time = 15
+temperature = 260
+
+[filament:ERYONE PETG @MEGA]
+inherits = *PETG_mega*
+filament_vendor = ERYONE
+filament_cost = 20.99
+filament_notes = "https://eryone.com/petg/show/10.html"
+
+[filament:FormFutura HDglass @MEGA]
+inherits = *PETG_mega*
+filament_vendor = FormFutura
+filament_cost = 46.65
+filament_notes = "HDglass is a high performance PETG type of 3D printer with unsurpassed 3D printing properties and improved mechanical strength, flexibility, toughness and heat resistance.\n\nhttps://www.formfutura.com/shop/product/hdglass-2812"
+
+[filament:FormFutura ReForm rPET @MEGA]
+inherits = *PETG_mega*
+filament_vendor = FormFutura
+filament_cost = 26.65
+filament_notes = "ReForm rPET is a recycled PETG type of 3D printer filament that is made from post-industrial waste streams of a nearby located plastic bottle manufacturer.\n\nhttps://www.formfutura.com/shop/product/reform-rpet-2836"
+filament_spool_weight = 176
+
+[filament:Janbex transparent PETG @MEGA]
+inherits = *PETG_mega*
+filament_vendor = Janbex
+filament_cost = 31.99
+filament_spool_weight = 222
+first_layer_temperature = 215
+min_fan_speed = 100
+temperature = 210
+
 [filament:*PLA_mega*]
 inherits = *common_mega*
 bed_temperature = 60
 disable_fan_first_layers = 1
+filament_colour = #FF3232
 filament_cost = 25.40
 filament_density = 1.24
 filament_max_volumetric_speed = 10
-first_layer_bed_temperature = 60
+first_layer_bed_temperature = 65
 first_layer_temperature = 215
 min_fan_speed = 100
 temperature = 210
@@ -1011,73 +1111,97 @@ temperature = 210
 [filament:Generic PLA @MEGA]
 inherits = *PLA_mega*
 
-[filament:*3Dmensionals PLA_mega*]
+[filament:3Dmensionals PLA @MEGA]
 inherits = *PLA_mega*
 filament_vendor = 3Dmensionals
-filament_cost = 23.35
+filament_cost = 22.90
+filament_notes = "Das 3DFilaments - PLA von 3Dmensionals ist ein sehr leicht zu druckendes 3D-Drucker Filament. Dabei handelt es sich um ein etwas härteres PLA mit einer exzellenten thermischen Stabilität. Das Filament zeichnet sich vor allem durch verzugfreies 3D-Drucken aus und weist minimale bis keine Verformung nach dem Abkühlen auf. Daher ist es besonders gut für den Druck größerer Objekte geeignet. Zudem bietet 3DFilaments - PLA über die gesamte Fadenläge eine hervorragende Durchmesser- und Rundheitstoleranz.\n\nhttps://www.3dmensionals.de/3dfilaments?number=PSU3DM001V"
 
-[filament:3Dmensionals PLA @MEGA]
-inherits = *3Dmensionals PLA_mega*
+[filament:3D Warhorse PLA @MEGA]
+inherits = *PLA_mega*
+filament_vendor = 3D Warhorse
+filament_cost = 19.99
 
-[filament:3Dmensionals PLA blue @MEGA]
-inherits = *3Dmensionals PLA_mega*
-filament_colour = #4155FB
+[filament:AMOLEN wood PLA]
+inherits = *PLA_mega*
+filament_vendor = AMOLEN
+compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/
+extrusion_multiplier = 1.1
+filament_colour = #DFC287
+filament_cost = 33.99
+filament_density = 1.23
+filament_max_volumetric_speed = 9
+filament_notes = "https://amolen.com/collections/wood/products/amolen-pla-filament-1-75mm-wood-color-3d-printer-filament-1kg2-2lb"
+
+[filament:FormFutura EasyFil PLA @MEGA]
+inherits = *PLA_mega*
+filament_vendor = FormFutura
+filament_cost = 39.93
+filament_notes = "EasyFil PLA is an easy to print PLA type of 3D printer filament that is available in a wide variety of colors. Its improved flowing behavior make 3D printed layers flow more into each other.\n\nhttps://www.formfutura.com/shop/product/easyfil-pla-2801"
 
-[filament:3Dmensionals PLA silver @MEGA]
-inherits = *3Dmensionals PLA_mega*
-filament_colour = #B9B5B4
+[filament:FormFutura ReForm rPLA @MEGA]
+inherits = *PLA_mega*
+filament_vendor = FormFutura
+filament_cost = 26.65
+filament_notes = "ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable.\n\nhttps://www.formfutura.com/shop/product/reform-rpla-2838"
 
-[filament:3Dmensionals PLA white @MEGA]
-inherits = *3Dmensionals PLA_mega*
-filament_colour = #FEFEFD
+[filament:GIANTARM PLA @MEGA]
+inherits = *PLA_mega*
+filament_vendor = GIANTARM
+filament_cost = 24.99
 
-[filament:*Verbatim PLA_mega*]
+[filament:Prusament PLA @MEGA]
 inherits = *PLA_mega*
-filament_vendor = Verbatim
-filament_cost = 23.88
+filament_vendor = Prusa Polymers
+filament_cost = 30.24
+filament_notes = "Affordable filament for everyday printing in premium quality manufactured in-house by Josef Prusa"
+filament_spool_weight = 201
+temperature = 215
 
 [filament:Verbatim PLA @MEGA]
-inherits = *Verbatim PLA_mega*
-
-[filament:Verbatim PLA black @MEGA]
-inherits = *Verbatim PLA_mega*
-filament_colour = #333333
+inherits = *PLA_mega*
+filament_vendor = Verbatim
+filament_cost = 23.88
 
 [printer:*common_mega*]
 printer_technology = FFF
 bed_shape = 0x0,210x0,210x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]
 default_filament_profile = Generic PLA @MEGA
 default_print_profile = 0.15mm QUALITY @MEGA
-deretract_speed = 50
-end_gcode = G4 ; wait\nG92 E0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors
+deretract_speed = 40
+end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors
 extruder_colour = #808080
 gcode_flavor = marlin
 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
 max_layer_height = 0.36
 max_print_height = 205
+remaining_times = 1
+retract_before_travel = 1.5
 retract_before_wipe = 60%
 retract_layer_change = 1
-retract_length = 6
-retract_lift = 0.075
+retract_length = 3.2
+retract_lift = 0.2
 retract_lift_below = 204
+retract_speed = 70
 silent_mode = 0
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y0 Z1 F100 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG92 E0\nG1 Z0.2 F360\nG1 X60 E9 F700 ; intro line\nG1 X100 E12.5 F700 ; intro line\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0
+thumbnails = 16x16,220x124
 use_relative_e_distances = 1
 wipe = 1
-machine_max_acceleration_e = 5000
+machine_max_acceleration_e = 10000
 machine_max_acceleration_extruding = 1250
 machine_max_acceleration_retracting = 1250
-machine_max_acceleration_x = 1000
-machine_max_acceleration_y = 1000
-machine_max_acceleration_z = 200
+machine_max_acceleration_x = 3000
+machine_max_acceleration_y = 2000
+machine_max_acceleration_z = 60
 machine_max_feedrate_e = 60
-machine_max_feedrate_x = 200
-machine_max_feedrate_y = 200
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
 machine_max_feedrate_z = 6
 machine_max_jerk_e = 5
-machine_max_jerk_x = 8
-machine_max_jerk_y = 8
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
 machine_max_jerk_z = 0.4
 
 [printer:Anycubic i3 Mega]
@@ -1091,6 +1215,7 @@ inherits = *common_mega*
 printer_model = I3MEGAS
 printer_variant = 0.4
 printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_I3_MEGA_S\nPRINTER_HAS_BOWDEN
+machine_max_feedrate_e = 30
 machine_max_feedrate_z = 8
 
 
@@ -1134,7 +1259,8 @@ support_material_auto = 1
 support_material_threshold = 50
 support_material_enforce_layers = 0
 raft_layers = 0
-support_material_contact_distance = 0.1
+support_material_contact_distance_top = 0.1
+support_material_contact_distance_bottom = 0.1
 support_material_pattern = rectilinear
 support_material_with_sheath = 0
 support_material_spacing = 2
@@ -1169,8 +1295,9 @@ wipe_tower_rotation_angle = 0
 wipe_tower_bridging = 10
 interface_shells = 0
 bridge_flow_ratio = 80%
+resolution = 0.005
 xy_size_compensation = 0
-elefant_foot_compensation = 0.2
+first_layer_size_compensation = -0.2
 clip_multipart_objects = 1
 complete_objects = 0
 extruder_clearance_radius = 45
@@ -1704,7 +1831,7 @@ use_relative_e_distances = 0
 use_firmware_retraction = 0
 use_volumetric_e = 0
 variable_layer_height = 1
-start_gcode = ; start_gcode | start\n\n; v11 2020-11-14_11-27 tillverka\n\n; set metric values\n\nG21\n\n; use absolute positioning\n\nG90\n\n; set extruder to absolute mode\n\nM82\n\n; start with fan off\n\nM107\n\n; set temps\n\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\n\n; home xy\n\nG28 X0 Y0\n\n; home z\n\nG28 Z0\n\n; move the head down to Z 94mm\n\nG1 Z94.0 F2394\n\n; set and wait for temps\n\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\n\n; zero the extruded length\n\nG92 E0\n\n; extrude 3mm of feed stock\n\nG1 F200 E3\n\n; zero the extruded length again\n\nG92 E0\n\n; set speed\n\nG1 F{travel_speed}\n\n; print preskirt\n\nG92 E0\nG1 E3.94000 F2520.00000\n\nG1 X125.464 Y-139.310\nG1 Z0.329 F3994.000\n\nG1 F994.000\n\nG1 X125.464 Y-139.310 E4.19679\nG1 X130.218 Y-134.876 E4.70359\nG1 X132.569 Y-132.567 E4.96053\nG1 X137.099 Y-127.877 E5.46890\nG1 X139.325 Y-125.447 E5.72585\nG1 X141.507 Y-122.981 E5.98254\nG1 X145.685 Y-118.002 E6.48934\nG1 X149.741 Y-112.810 E7.00296\nG1 X153.561 Y-107.552 E7.50975\nG1 X155.440 Y-104.819 E7.76827\nG1 X158.980 Y-99.367 E8.27506\nG1 X160.702 Y-96.558 E8.53201\nG1 X163.962 Y-90.911 E9.04038\nG1 X165.535 Y-88.015 E9.29732\nG1 X168.496 Y-82.205 E9.80570\nG1 X169.915 Y-79.231 E10.06264\nG1 X171.280 Y-76.235 E10.31934\nG1 X173.819 Y-70.251 E10.82613\nG1 X176.180 Y-64.101 E11.33975\nG1 X178.297 Y-57.955 E11.84654\nG1 X179.294 Y-54.793 E12.10507\nG1 X181.085 Y-48.544 E12.61186\nG1 X181.911 Y-45.354 E12.86880\nG1 X183.378 Y-39.001 E13.37718\nG1 X184.035 Y-35.771 E13.63412\nG1 X185.168 Y-29.350 E14.14250\nG1 X185.655 Y-26.091 E14.39944\nG1 X186.084 Y-22.826 E14.65614\nG1 X186.764 Y-16.362 E15.16293\nG1 X187.223 Y-9.790 E15.67655\nG1 X187.450 Y-3.294 E16.18334\nG1 X187.479 Y0.002 E16.44028\nG1 X187.450 Y3.294 E16.69698\nG1 X187.223 Y9.810 E17.20529\nG1 X187.021 Y13.100 E17.46229\nG1 X186.454 Y19.575 E17.96909\nG1 X186.079 Y22.870 E18.22761\nG1 X185.174 Y29.307 E18.73440\nG1 X184.031 Y35.794 E19.24802\nG1 X182.679 Y42.152 E19.75481\nG1 X181.910 Y45.357 E20.01176\nG1 X180.223 Y51.655 E20.52013\nG1 X179.287 Y54.815 E20.77708\nG1 X177.272 Y61.017 E21.28545\nG1 X176.172 Y64.123 E21.54239\nG1 X175.019 Y67.207 E21.79909\nG1 X172.584 Y73.234 E22.30588\nG1 X169.905 Y79.252 E22.81950\nG1 X167.055 Y85.094 E23.32629\nG1 X165.524 Y88.035 E23.58482\nG1 X162.373 Y93.721 E24.09161\nG1 X160.700 Y96.560 E24.34855\nG1 X157.245 Y102.090 E24.85693\nG1 X155.427 Y104.838 E25.11387\nG1 X151.687 Y110.180 E25.62225\nG1 X149.727 Y112.829 E25.87919\nG1 X147.722 Y115.441 E26.13588\nG1 X143.631 Y120.493 E26.64268\nG1 X139.310 Y125.464 E27.15629\nG1 X134.876 Y130.218 E27.66309\nG1 X132.567 Y132.569 E27.92003\nG1 X127.877 Y137.099 E28.42840\nG1 X125.447 Y139.325 E28.68535\nG1 X122.981 Y141.507 E28.94204\nG1 X118.002 Y145.685 E29.44883\nG1 X112.810 Y149.741 E29.96245\nG1 X107.552 Y153.561 E30.46924\nG1 X104.819 Y155.440 E30.72777\nG1 X99.367 Y158.980 E31.23456\nG1 X96.558 Y160.702 E31.49151\nG1 X90.911 Y163.962 E31.99988\nG1 X88.015 Y165.535 E32.25682\nG1 X82.205 Y168.496 E32.76520\nG1 X79.231 Y169.915 E33.02214\nG1 X76.235 Y171.280 E33.27884\nG1 X70.251 Y173.819 E33.78563\nG1 X64.101 Y176.180 E34.29925\nG1 X57.955 Y178.297 E34.80604\nG1 X54.793 Y179.294 E35.06457\nG1 X48.544 Y181.085 E35.57136\nG1 X45.354 Y181.911 E35.82830\nG1 X39.001 Y183.378 E36.33668\nG1 X35.771 Y184.035 E36.59362\nG1 X29.350 Y185.168 E37.10200\nG1 X26.091 Y185.655 E37.35894\nG1 X22.826 Y186.084 E37.61563\nG1 X16.362 Y186.764 E38.12242\nG1 X9.790 Y187.223 E38.63605\nG1 X3.294 Y187.450 E39.14283\nG1 X-0.002 Y187.479 E39.39978\nG1 X-3.294 Y187.450 E39.65648\nG1 X-9.810 Y187.223 E40.16479\nG1 X-13.100 Y187.021 E40.42179\nG1 X-19.575 Y186.454 E40.92858\nG1 X-22.870 Y186.079 E41.18711\nG1 X-29.307 Y185.174 E41.69390\nG1 X-35.794 Y184.031 E42.20752\nG1 X-42.152 Y182.679 E42.71431\nG1 X-45.357 Y181.910 E42.97126\nG1 X-51.655 Y180.223 E43.47963\nG1 X-54.815 Y179.287 E43.73657\nG1 X-61.017 Y177.272 E44.24495\nG1 X-64.123 Y176.172 E44.50189\nG1 X-67.207 Y175.019 E44.75859\nG1 X-73.234 Y172.584 E45.26538\nG1 X-79.252 Y169.905 E45.77900\nG1 X-85.094 Y167.055 E46.28579\nG1 X-88.035 Y165.524 E46.54432\nG1 X-93.721 Y162.373 E47.05111\nG1 X-96.560 Y160.700 E47.30805\nG1 X-102.090 Y157.245 E47.81643\nG1 X-104.838 Y155.427 E48.07337\nG1 X-110.180 Y151.687 E48.58174\nG1 X-112.829 Y149.727 E48.83869\nG1 X-115.441 Y147.722 E49.09538\nG1 X-120.493 Y143.631 E49.60218\nG1 X-125.464 Y139.310 E50.11579\nG1 X-130.218 Y134.876 E50.62259\nG1 X-132.569 Y132.567 E50.87953\nG1 X-137.099 Y127.877 E51.38790\nG1 X-139.325 Y125.447 E51.64485\nG1 X-141.507 Y122.981 E51.90154\nG1 X-145.685 Y118.002 E52.40833\nG1 X-149.741 Y112.810 E52.92195\nG1 X-153.561 Y107.552 E53.42874\nG1 X-155.440 Y104.819 E53.68727\nG1 X-158.980 Y99.367 E54.19406\nG1 X-160.702 Y96.558 E54.45101\nG1 X-163.962 Y90.911 E54.95938\nG1 X-165.535 Y88.015 E55.21632\nG1 X-168.496 Y82.205 E55.72470\nG1 X-169.915 Y79.231 E55.98164\nG1 X-171.280 Y76.235 E56.23834\nG1 X-173.819 Y70.251 E56.74513\nG1 X-176.180 Y64.101 E57.25875\nG1 X-178.297 Y57.955 E57.76554\nG1 X-179.294 Y54.793 E58.02407\nG1 X-181.085 Y48.544 E58.53086\nG1 X-181.911 Y45.354 E58.78780\nG1 X-183.378 Y39.001 E59.29618\nG1 X-184.035 Y35.771 E59.55312\nG1 X-185.168 Y29.350 E60.06149\nG1 X-185.655 Y26.091 E60.31844\nG1 X-186.084 Y22.826 E60.57513\nG1 X-186.764 Y16.362 E61.08192\nG1 X-187.223 Y9.790 E61.59554\nG1 X-187.450 Y3.294 E62.10233\nG1 X-187.479 Y-0.002 E62.35928\nG1 X-187.450 Y-3.294 E62.61598\nG1 X-187.223 Y-9.810 E63.12429\nG1 X-187.021 Y-13.100 E63.38129\nG1 X-186.454 Y-19.575 E63.88808\nG1 X-186.079 Y-22.870 E64.14661\nG1 X-185.174 Y-29.307 E64.65340\nG1 X-184.031 Y-35.794 E65.16702\nG1 X-182.679 Y-42.152 E65.67381\nG1 X-181.910 Y-45.357 E65.93076\nG1 X-180.223 Y-51.655 E66.43913\nG1 X-179.287 Y-54.815 E66.69607\nG1 X-177.272 Y-61.017 E67.20445\nG1 X-176.172 Y-64.123 E67.46139\nG1 X-175.019 Y-67.207 E67.71809\nG1 X-172.584 Y-73.234 E68.22488\nG1 X-169.905 Y-79.252 E68.73850\nG1 X-167.055 Y-85.094 E69.24529\nG1 X-165.524 Y-88.035 E69.50382\nG1 X-162.373 Y-93.721 E70.01061\nG1 X-160.700 Y-96.560 E70.26755\nG1 X-157.245 Y-102.090 E70.77593\nG1 X-155.427 Y-104.838 E71.03287\nG1 X-151.687 Y-110.180 E71.54124\nG1 X-149.727 Y-112.829 E71.79819\nG1 X-147.722 Y-115.441 E72.05488\nG1 X-143.631 Y-120.493 E72.56167\nG1 X-139.310 Y-125.464 E73.07529\nG1 X-134.876 Y-130.218 E73.58209\nG1 X-132.567 Y-132.569 E73.83903\nG1 X-127.877 Y-137.099 E74.34740\nG1 X-125.447 Y-139.325 E74.60435\nG1 X-122.981 Y-141.507 E74.86104\nG1 X-118.002 Y-145.685 E75.36783\nG1 X-112.810 Y-149.741 E75.88145\nG1 X-107.552 Y-153.561 E76.38824\nG1 X-104.819 Y-155.440 E76.64677\nG1 X-99.367 Y-158.980 E77.15356\nG1 X-96.558 Y-160.702 E77.41051\nG1 X-90.911 Y-163.962 E77.91888\nG1 X-88.015 Y-165.535 E78.17582\nG1 X-82.205 Y-168.496 E78.68420\nG1 X-79.231 Y-169.915 E78.94114\nG1 X-76.235 Y-171.280 E79.19784\nG1 X-70.251 Y-173.819 E79.70463\nG1 X-64.101 Y-176.180 E80.21825\nG1 X-57.955 Y-178.297 E80.72504\nG1 X-54.793 Y-179.294 E80.98356\nG1 X-48.544 Y-181.085 E81.49036\nG1 X-45.354 Y-181.911 E81.74730\nG1 X-39.001 Y-183.378 E82.25568\nG1 X-35.771 Y-184.035 E82.51262\nG1 X-29.350 Y-185.168 E83.02099\nG1 X-26.091 Y-185.655 E83.27794\nG1 X-22.826 Y-186.084 E83.53463\nG1 X-16.362 Y-186.764 E84.04142\nG1 X-9.790 Y-187.223 E84.55504\nG1 X-3.294 Y-187.450 E85.06183\nG1 X0.006 Y-187.479 E85.31908\nG1 X6.521 Y-187.366 E85.82715\nG1 X9.810 Y-187.223 E86.08379\nG1 X13.100 Y-187.021 E86.34079\nG1 X19.575 Y-186.454 E86.84758\nG1 X22.870 Y-186.079 E87.10611\nG1 X29.307 Y-185.174 E87.61290\nG1 X35.794 Y-184.031 E88.12652\nG1 X42.152 Y-182.679 E88.63331\nG1 X45.357 Y-181.910 E88.89025\nG1 X51.655 Y-180.223 E89.39863\nG1 X54.815 Y-179.287 E89.65557\nG1 X61.017 Y-177.272 E90.16395\nG1 X64.123 Y-176.172 E90.42089\nG1 X67.207 Y-175.019 E90.67759\nG1 X73.234 Y-172.584 E91.18438\nG1 X79.252 Y-169.905 E91.69800\nG1 X85.094 Y-167.055 E92.20479\nG1 X88.035 Y-165.524 E92.46332\nG1 X93.721 Y-162.373 E92.97011\nG1 X96.560 Y-160.700 E93.22705\nG1 X102.090 Y-157.245 E93.73543\nG1 X104.838 Y-155.427 E93.99237\nG1 X110.180 Y-151.687 E94.50074\nG1 X112.829 Y-149.727 E94.75768\nG1 X115.441 Y-147.722 E95.01438\nG1 X120.493 Y-143.631 E95.52117\nG1 X122.911 Y-141.529 E95.77098\n\n; end preskirt\n; start_gcode | end
+start_gcode = ; start_gcode | start\n\n; v11 2020-11-14_11-27 tillverka\n\n; set metric values\n\nG21\n\n; use absolute positioning\n\nG90\n\n; set extruder to absolute mode\n\nM82\n\n; start with fan off\n\nM107\n\n; set temps\n\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\nM140 S[first_layer_bed_temperature]\n\n; home xy\n\nG28 X0 Y0\n\n; home z\n\nG28 Z0\n\n; move the head down to Z 94mm\n\nG1 Z94.0 F2394\n\n; set and wait for temps\n\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\nM190 S[first_layer_bed_temperature]\n\n; zero the extruded length\n\nG92 E0\n\n; extrude 3mm of feed stock\n\nG1 F200 E3\n\n; zero the extruded length again\n\nG92 E0\n\n; set speed\n\nG1 F{travel_speed}\n\n; print preskirt\n\nG92 E0\nG1 E3.94000 F2520.00000\n\nG1 X125.464 Y-139.310\nG1 Z0.329 F3994.000\n\nG1 F994.000\n\nG1 X125.464 Y-139.310 E4.19679\nG1 X130.218 Y-134.876 E4.70359\nG1 X132.569 Y-132.567 E4.96053\nG1 X137.099 Y-127.877 E5.46890\nG1 X139.325 Y-125.447 E5.72585\nG1 X141.507 Y-122.981 E5.98254\nG1 X145.685 Y-118.002 E6.48934\nG1 X149.741 Y-112.810 E7.00296\nG1 X153.561 Y-107.552 E7.50975\nG1 X155.440 Y-104.819 E7.76827\nG1 X158.980 Y-99.367 E8.27506\nG1 X160.702 Y-96.558 E8.53201\nG1 X163.962 Y-90.911 E9.04038\nG1 X165.535 Y-88.015 E9.29732\nG1 X168.496 Y-82.205 E9.80570\nG1 X169.915 Y-79.231 E10.06264\nG1 X171.280 Y-76.235 E10.31934\nG1 X173.819 Y-70.251 E10.82613\nG1 X176.180 Y-64.101 E11.33975\nG1 X178.297 Y-57.955 E11.84654\nG1 X179.294 Y-54.793 E12.10507\nG1 X181.085 Y-48.544 E12.61186\nG1 X181.911 Y-45.354 E12.86880\nG1 X183.378 Y-39.001 E13.37718\nG1 X184.035 Y-35.771 E13.63412\nG1 X185.168 Y-29.350 E14.14250\nG1 X185.655 Y-26.091 E14.39944\nG1 X186.084 Y-22.826 E14.65614\nG1 X186.764 Y-16.362 E15.16293\nG1 X187.223 Y-9.790 E15.67655\nG1 X187.450 Y-3.294 E16.18334\nG1 X187.479 Y0.002 E16.44028\nG1 X187.450 Y3.294 E16.69698\nG1 X187.223 Y9.810 E17.20529\nG1 X187.021 Y13.100 E17.46229\nG1 X186.454 Y19.575 E17.96909\nG1 X186.079 Y22.870 E18.22761\nG1 X185.174 Y29.307 E18.73440\nG1 X184.031 Y35.794 E19.24802\nG1 X182.679 Y42.152 E19.75481\nG1 X181.910 Y45.357 E20.01176\nG1 X180.223 Y51.655 E20.52013\nG1 X179.287 Y54.815 E20.77708\nG1 X177.272 Y61.017 E21.28545\nG1 X176.172 Y64.123 E21.54239\nG1 X175.019 Y67.207 E21.79909\nG1 X172.584 Y73.234 E22.30588\nG1 X169.905 Y79.252 E22.81950\nG1 X167.055 Y85.094 E23.32629\nG1 X165.524 Y88.035 E23.58482\nG1 X162.373 Y93.721 E24.09161\nG1 X160.700 Y96.560 E24.34855\nG1 X157.245 Y102.090 E24.85693\nG1 X155.427 Y104.838 E25.11387\nG1 X151.687 Y110.180 E25.62225\nG1 X149.727 Y112.829 E25.87919\nG1 X147.722 Y115.441 E26.13588\nG1 X143.631 Y120.493 E26.64268\nG1 X139.310 Y125.464 E27.15629\nG1 X134.876 Y130.218 E27.66309\nG1 X132.567 Y132.569 E27.92003\nG1 X127.877 Y137.099 E28.42840\nG1 X125.447 Y139.325 E28.68535\nG1 X122.981 Y141.507 E28.94204\nG1 X118.002 Y145.685 E29.44883\nG1 X112.810 Y149.741 E29.96245\nG1 X107.552 Y153.561 E30.46924\nG1 X104.819 Y155.440 E30.72777\nG1 X99.367 Y158.980 E31.23456\nG1 X96.558 Y160.702 E31.49151\nG1 X90.911 Y163.962 E31.99988\nG1 X88.015 Y165.535 E32.25682\nG1 X82.205 Y168.496 E32.76520\nG1 X79.231 Y169.915 E33.02214\nG1 X76.235 Y171.280 E33.27884\nG1 X70.251 Y173.819 E33.78563\nG1 X64.101 Y176.180 E34.29925\nG1 X57.955 Y178.297 E34.80604\nG1 X54.793 Y179.294 E35.06457\nG1 X48.544 Y181.085 E35.57136\nG1 X45.354 Y181.911 E35.82830\nG1 X39.001 Y183.378 E36.33668\nG1 X35.771 Y184.035 E36.59362\nG1 X29.350 Y185.168 E37.10200\nG1 X26.091 Y185.655 E37.35894\nG1 X22.826 Y186.084 E37.61563\nG1 X16.362 Y186.764 E38.12242\nG1 X9.790 Y187.223 E38.63605\nG1 X3.294 Y187.450 E39.14283\nG1 X-0.002 Y187.479 E39.39978\nG1 X-3.294 Y187.450 E39.65648\nG1 X-9.810 Y187.223 E40.16479\nG1 X-13.100 Y187.021 E40.42179\nG1 X-19.575 Y186.454 E40.92858\nG1 X-22.870 Y186.079 E41.18711\nG1 X-29.307 Y185.174 E41.69390\nG1 X-35.794 Y184.031 E42.20752\nG1 X-42.152 Y182.679 E42.71431\nG1 X-45.357 Y181.910 E42.97126\nG1 X-51.655 Y180.223 E43.47963\nG1 X-54.815 Y179.287 E43.73657\nG1 X-61.017 Y177.272 E44.24495\nG1 X-64.123 Y176.172 E44.50189\nG1 X-67.207 Y175.019 E44.75859\nG1 X-73.234 Y172.584 E45.26538\nG1 X-79.252 Y169.905 E45.77900\nG1 X-85.094 Y167.055 E46.28579\nG1 X-88.035 Y165.524 E46.54432\nG1 X-93.721 Y162.373 E47.05111\nG1 X-96.560 Y160.700 E47.30805\nG1 X-102.090 Y157.245 E47.81643\nG1 X-104.838 Y155.427 E48.07337\nG1 X-110.180 Y151.687 E48.58174\nG1 X-112.829 Y149.727 E48.83869\nG1 X-115.441 Y147.722 E49.09538\nG1 X-120.493 Y143.631 E49.60218\nG1 X-125.464 Y139.310 E50.11579\nG1 X-130.218 Y134.876 E50.62259\nG1 X-132.569 Y132.567 E50.87953\nG1 X-137.099 Y127.877 E51.38790\nG1 X-139.325 Y125.447 E51.64485\nG1 X-141.507 Y122.981 E51.90154\nG1 X-145.685 Y118.002 E52.40833\nG1 X-149.741 Y112.810 E52.92195\nG1 X-153.561 Y107.552 E53.42874\nG1 X-155.440 Y104.819 E53.68727\nG1 X-158.980 Y99.367 E54.19406\nG1 X-160.702 Y96.558 E54.45101\nG1 X-163.962 Y90.911 E54.95938\nG1 X-165.535 Y88.015 E55.21632\nG1 X-168.496 Y82.205 E55.72470\nG1 X-169.915 Y79.231 E55.98164\nG1 X-171.280 Y76.235 E56.23834\nG1 X-173.819 Y70.251 E56.74513\nG1 X-176.180 Y64.101 E57.25875\nG1 X-178.297 Y57.955 E57.76554\nG1 X-179.294 Y54.793 E58.02407\nG1 X-181.085 Y48.544 E58.53086\nG1 X-181.911 Y45.354 E58.78780\nG1 X-183.378 Y39.001 E59.29618\nG1 X-184.035 Y35.771 E59.55312\nG1 X-185.168 Y29.350 E60.06149\nG1 X-185.655 Y26.091 E60.31844\nG1 X-186.084 Y22.826 E60.57513\nG1 X-186.764 Y16.362 E61.08192\nG1 X-187.223 Y9.790 E61.59554\nG1 X-187.450 Y3.294 E62.10233\nG1 X-187.479 Y-0.002 E62.35928\nG1 X-187.450 Y-3.294 E62.61598\nG1 X-187.223 Y-9.810 E63.12429\nG1 X-187.021 Y-13.100 E63.38129\nG1 X-186.454 Y-19.575 E63.88808\nG1 X-186.079 Y-22.870 E64.14661\nG1 X-185.174 Y-29.307 E64.65340\nG1 X-184.031 Y-35.794 E65.16702\nG1 X-182.679 Y-42.152 E65.67381\nG1 X-181.910 Y-45.357 E65.93076\nG1 X-180.223 Y-51.655 E66.43913\nG1 X-179.287 Y-54.815 E66.69607\nG1 X-177.272 Y-61.017 E67.20445\nG1 X-176.172 Y-64.123 E67.46139\nG1 X-175.019 Y-67.207 E67.71809\nG1 X-172.584 Y-73.234 E68.22488\nG1 X-169.905 Y-79.252 E68.73850\nG1 X-167.055 Y-85.094 E69.24529\nG1 X-165.524 Y-88.035 E69.50382\nG1 X-162.373 Y-93.721 E70.01061\nG1 X-160.700 Y-96.560 E70.26755\nG1 X-157.245 Y-102.090 E70.77593\nG1 X-155.427 Y-104.838 E71.03287\nG1 X-151.687 Y-110.180 E71.54124\nG1 X-149.727 Y-112.829 E71.79819\nG1 X-147.722 Y-115.441 E72.05488\nG1 X-143.631 Y-120.493 E72.56167\nG1 X-139.310 Y-125.464 E73.07529\nG1 X-134.876 Y-130.218 E73.58209\nG1 X-132.567 Y-132.569 E73.83903\nG1 X-127.877 Y-137.099 E74.34740\nG1 X-125.447 Y-139.325 E74.60435\nG1 X-122.981 Y-141.507 E74.86104\nG1 X-118.002 Y-145.685 E75.36783\nG1 X-112.810 Y-149.741 E75.88145\nG1 X-107.552 Y-153.561 E76.38824\nG1 X-104.819 Y-155.440 E76.64677\nG1 X-99.367 Y-158.980 E77.15356\nG1 X-96.558 Y-160.702 E77.41051\nG1 X-90.911 Y-163.962 E77.91888\nG1 X-88.015 Y-165.535 E78.17582\nG1 X-82.205 Y-168.496 E78.68420\nG1 X-79.231 Y-169.915 E78.94114\nG1 X-76.235 Y-171.280 E79.19784\nG1 X-70.251 Y-173.819 E79.70463\nG1 X-64.101 Y-176.180 E80.21825\nG1 X-57.955 Y-178.297 E80.72504\nG1 X-54.793 Y-179.294 E80.98356\nG1 X-48.544 Y-181.085 E81.49036\nG1 X-45.354 Y-181.911 E81.74730\nG1 X-39.001 Y-183.378 E82.25568\nG1 X-35.771 Y-184.035 E82.51262\nG1 X-29.350 Y-185.168 E83.02099\nG1 X-26.091 Y-185.655 E83.27794\nG1 X-22.826 Y-186.084 E83.53463\nG1 X-16.362 Y-186.764 E84.04142\nG1 X-9.790 Y-187.223 E84.55504\nG1 X-3.294 Y-187.450 E85.06183\nG1 X0.006 Y-187.479 E85.31908\nG1 X6.521 Y-187.366 E85.82715\nG1 X9.810 Y-187.223 E86.08379\nG1 X13.100 Y-187.021 E86.34079\nG1 X19.575 Y-186.454 E86.84758\nG1 X22.870 Y-186.079 E87.10611\nG1 X29.307 Y-185.174 E87.61290\nG1 X35.794 Y-184.031 E88.12652\nG1 X42.152 Y-182.679 E88.63331\nG1 X45.357 Y-181.910 E88.89025\nG1 X51.655 Y-180.223 E89.39863\nG1 X54.815 Y-179.287 E89.65557\nG1 X61.017 Y-177.272 E90.16395\nG1 X64.123 Y-176.172 E90.42089\nG1 X67.207 Y-175.019 E90.67759\nG1 X73.234 Y-172.584 E91.18438\nG1 X79.252 Y-169.905 E91.69800\nG1 X85.094 Y-167.055 E92.20479\nG1 X88.035 Y-165.524 E92.46332\nG1 X93.721 Y-162.373 E92.97011\nG1 X96.560 Y-160.700 E93.22705\nG1 X102.090 Y-157.245 E93.73543\nG1 X104.838 Y-155.427 E93.99237\nG1 X110.180 Y-151.687 E94.50074\nG1 X112.829 Y-149.727 E94.75768\nG1 X115.441 Y-147.722 E95.01438\nG1 X120.493 Y-143.631 E95.52117\nG1 X122.911 Y-141.529 E95.77098\n\n; end preskirt\n; start_gcode | end
 end_gcode = ; end_gcode | start\n\n; v11 2020-11-14_11-27 tillverka\n\n; use relative positioning\n\nG91\n\n; retract the filament a bit before lifting the nozzle to release some of the pressure\n\nG1 E-1 F300\n\n; home\n\nG28\n\n; use absolute positioning\n\nG90\n\n; cooldown\n\nM104 S0\nM140 S0\n\n; end_gcode | end\n
 before_layer_gcode =
 layer_gcode =
@@ -1741,7 +1868,7 @@ machine_max_jerk_z = 5
 machine_min_extruding_rate = 0
 machine_min_travel_rate = 0
 printer_settings_id =
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PREDATOR\nPRINTER_HAS_BOWDEN\n
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PREDATOR\nPRINTER_HAS_BOWDEN\n
 default_filament_profile = Generic PLA @PREDATOR
 
 [printer:Anycubic Predator 0.4 nozzle]
diff --git a/Anycubic/i3megas.svg b/Anycubic/i3megas.svg
new file mode 100644
index 0000000..dfb4ae4
--- /dev/null
+++ b/Anycubic/i3megas.svg
@@ -0,0 +1,561 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<!-- Created with Inkscape (http://www.inkscape.org/) -->
+
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   width="210.5mm"
+   height="210.5mm"
+   viewBox="0 0 210.5 210.5"
+   version="1.1"
+   id="svg886"
+   inkscape:version="0.92.4 (5da689c313, 2019-01-14)"
+   sodipodi:docname="ai3m.svg">
+  <defs
+     id="defs880" />
+  <sodipodi:namedview
+     id="base"
+     pagecolor="#7670ff"
+     bordercolor="#666666"
+     borderopacity="1.0"
+     inkscape:pageopacity="0"
+     inkscape:pageshadow="2"
+     inkscape:zoom="0.70710678"
+     inkscape:cx="466.73093"
+     inkscape:cy="380.93745"
+     inkscape:document-units="mm"
+     inkscape:current-layer="layer1"
+     showgrid="false"
+     inkscape:lockguides="false"
+     showguides="false"
+     inkscape:window-width="1920"
+     inkscape:window-height="1017"
+     inkscape:window-x="1912"
+     inkscape:window-y="-8"
+     inkscape:window-maximized="1" />
+  <metadata
+     id="metadata883">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     inkscape:groupmode="layer"
+     id="layer3"
+     inkscape:label="Layer 2"
+     transform="translate(0,-86.5)"
+     style="display:inline"
+     sodipodi:insensitive="true">
+    <path
+       id="path869"
+       style="display:inline;fill:#ffffff;fill-opacity:1;stroke:none;stroke-width:0.04216461;stroke-linecap:round;stroke-linejoin:miter;stroke-miterlimit:10;stroke-dasharray:none;stroke-opacity:1"
+       d="m 167.32704,288.75984 v -3.83255 h 1.45715 v 7.07119 l -6.06232,-5.36476 v -1.94915 z m -9.42165,-2.52278 1.54352,2.96287 h -0.60107 l -0.76147,1.4617 h 2.12401 l 0.6004,1.1525 h 1.65752 l -3.73414,-7.16792 z m 44.62362,4.25408 v 1.50745 c 0.98166,-0.11796 1.8734,-0.62934 2.47099,-1.41702 l -1.14996,-0.94952 c -0.31636,0.44259 -0.78818,0.74942 -1.32103,0.85909 z m -40.17486,-27.16603 11.53897,-20.77294 18.70747,18.05526 -17.35981,21.92818 z m -5.69662,28.48902 1.6624,-3.19108 -0.82877,-1.59087 L 155,291.81413 Z m 22.56867,-7.05936 c 0.97028,0.11659 1.8532,0.61761 2.4509,1.39077 l -1.16155,0.93258 c -0.31614,-0.41985 -0.77457,-0.70996 -1.28935,-0.81591 z m 3.41542,0.17252 h 1.46761 v 4.19716 c 0,0.59031 0.3725,1.11637 0.92932,1.3124 v 1.50898 c -1.38222,-0.22635 -2.39693,-1.42074 -2.39693,-2.82138 z m 8.44048,6.88684 v -6.88684 h -1.43359 v 6.88684 z m 1.73019,-4.18512 c 0.35459,0 0.64204,-0.28746 0.64204,-0.64204 0,-0.35459 -0.28745,-0.64204 -0.64204,-0.64204 h -0.8869 v -1.41764 h 0.8869 c 1.13753,0 2.05968,0.92215 2.05968,2.05968 0,1.13753 -0.92215,2.05968 -2.05968,2.05968 h -0.8869 l -0.004,-1.41764 z m -30.09042,4.18512 h 1.49929 v -2.7357 l -1.49929,-1.32677 z m 33.23702,0 h 1.43359 v -6.88684 h -1.43359 z m -6.61958,-43.20436 -15.24232,-6.09042 18.63476,17.98509 11.51531,1.11097 z m -18.15413,43.20436 v -3.62964 l 2.39506,-3.2572 h 1.87519 l -2.78508,3.78762 v 3.09922 z m 0.39556,-5.55407 -0.92997,1.26472 -1.81565,-2.59749 h 1.814 z m 21.17859,-25.58701 11.46398,1.10603 -13.7034,15.36187 -15.13578,5.47973 z m 7.21757,28.12689 c 0.17089,0.85467 0.83896,1.52274 1.69364,1.69363 v 1.50644 c -1.6794,-0.19619 -3.0039,-1.52068 -3.20008,-3.20007 -0.23374,-2.00112 1.19897,-3.81283 3.20008,-4.04658 v 1.50643 c -1.16914,0.23375 -1.92739,1.37102 -1.69364,2.54015 z m -5.04526,0.93674 c 0,-0.30809 -0.0685,-0.61233 -0.20062,-0.89067 -0.35104,0.36232 -0.79749,0.61783 -1.28769,0.73699 0.0131,0.0502 0.0197,0.10183 0.0197,0.15368 0,0.33625 -0.2726,0.60885 -0.60885,0.60885 h -0.92882 v 1.4686 l 0.92882,-10e-6 c 1.14733,0 2.07744,-0.9301 2.07744,-2.07744 z m -14.38439,-0.10463 1.14995,0.94952 c -0.5976,0.78768 -1.48934,1.29906 -2.471,1.41702 v -1.50745 c 0.53286,-0.10967 1.00468,-0.4165 1.32105,-0.85909 z m -2.17951,0.86152 c -0.85468,-0.17089 -1.52275,-0.83896 -1.69364,-1.69363 -0.23376,-1.16913 0.52451,-2.3064 1.69364,-2.54015 v -1.50643 c -2.00111,0.23375 -3.43383,2.04546 -3.20007,4.04658 0.19617,1.67939 1.52067,3.00388 3.20007,3.20007 z m 9.99181,-1.36912 v -4.19716 h -1.46761 v 4.19716 c 0,0.62159 -0.41231,1.16778 -1.01011,1.3381 v 1.49533 c 1.41883,-0.19091 2.47772,-1.40182 2.47772,-2.83343 z m 14.16946,-2.86224 v -1.50744 c 0.97027,0.11659 1.85319,0.61761 2.45089,1.39077 l -1.16154,0.93258 c -0.31614,-0.41985 -0.77458,-0.70996 -1.28935,-0.81591 z"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccccccccccccccccccccccccccccccccccccccccccccccccsccccscccccccccccccccccccccccccccccccccccccccccccsccsccccscccccccccccccccccccccccc" />
+  </g>
+  <g
+     inkscape:groupmode="layer"
+     id="layer2"
+     inkscape:label="Layer 1"
+     transform="translate(0,-86.5)"
+     style="display:none">
+    <path
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.68079633,77.180801 H 219.81921"
+       id="path1596"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 219.81921,77.180801 V 296.31918"
+       id="path1594"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 219.81921,296.31918 H 0.68079633"
+       id="path1592"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.68079633,296.31918 V 77.180801"
+       id="rect1544"
+       inkscape:connector-curvature="0" />
+    <path
+       id="path5301"
+       d="M 9.681,296.31918 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.40000001;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 19.681,296.31918 V 77.180801"
+       id="path5303" />
+    <path
+       id="path5305"
+       d="M 29.681,296.31918 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 39.681,296.31918 V 77.180801"
+       id="path5307" />
+    <path
+       id="path5309"
+       d="M 49.681,296.31918 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.40000001;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 59.681,296.31918 V 77.180801"
+       id="path5311" />
+    <path
+       id="path5313"
+       d="M 69.681,296.31918 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 79.681,296.31918 V 77.180801"
+       id="path5315" />
+    <path
+       id="path5317"
+       d="M 89.681,296.31918 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 99.681,296.31918 V 77.180801"
+       id="path5319" />
+    <path
+       id="path5321"
+       d="M 109.681,296.31918 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.40000001;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 119.681,296.31918 V 77.180801"
+       id="path5323" />
+    <path
+       id="path5325"
+       d="M 129.681,296.31918 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 139.681,296.31918 V 77.180801"
+       id="path5327" />
+    <path
+       id="path5329"
+       d="M 149.681,296.31918 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.40000001;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 159.681,296.31918 V 77.180801"
+       id="path5331" />
+    <path
+       id="path5333"
+       d="m 169.681,296.31918 v -3.0895 m 0,-10.12031 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 179.681,296.31918 v -2.82492 m 0,-10.18645 v -6.87917 m 0,-28.50885 V 77.180801"
+       id="path5335"
+       sodipodi:nodetypes="cccccc" />
+    <path
+       id="path5337"
+       d="m 189.681,296.31918 v -2.95721 m 0,-50.37005 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 199.681,296.31918 v -3.15564 m 0,-9.72344 v -4.69636 m 0,-30.8901 V 77.180801"
+       id="path5339"
+       sodipodi:nodetypes="cccccc" />
+    <path
+       id="path5341"
+       d="m 209.681,296.31918 v -2.89106 m 0,-10.25261 v -14.61822 m 0,-12.76615 V 77.180801"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.40000001;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccccc" />
+    <path
+       id="path5343"
+       d="m 219.81921,287.319 h -3.39004 m -51.52761,0 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.40000001;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 219.81921,277.319 h -18.00827 m -21.36511,0 H 0.68079633"
+       id="path5345"
+       sodipodi:nodetypes="cccc" />
+    <path
+       id="path5347"
+       d="m 219.81921,267.319 h -8.94629 m -36.90938,0 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 219.81921,257.319 h -8.74786 m -36.90937,0 H 0.68079633"
+       id="path5349"
+       sodipodi:nodetypes="cccc" />
+    <path
+       id="path5351"
+       d="m 219.81921,247.319 h -21.44786 m -18.12395,0 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.40000001;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 219.81921,237.319 H 0.68079633"
+       id="path5353" />
+    <path
+       id="path5355"
+       d="M 219.81921,227.319 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 219.81921,217.319 H 0.68079633"
+       id="path5357" />
+    <path
+       id="path5359"
+       d="M 219.81921,207.319 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 219.81921,197.319 H 0.68079633"
+       id="path5361" />
+    <path
+       id="path5363"
+       d="M 219.81921,187.319 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.40000001;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 219.81921,177.319 H 0.68079633"
+       id="path5365" />
+    <path
+       id="path5367"
+       d="M 219.81921,167.319 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 219.81921,157.319 H 0.68079633"
+       id="path5369" />
+    <path
+       id="path5371"
+       d="M 219.81921,147.319 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.40000001;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 219.81921,137.319 H 0.68079633"
+       id="path5373" />
+    <path
+       id="path5375"
+       d="M 219.81921,127.319 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 219.81921,117.319 H 0.68079633"
+       id="path5377" />
+    <path
+       id="path5379"
+       d="M 219.81921,107.319 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+    <path
+       inkscape:connector-curvature="0"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.1;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 219.81921,97.319 H 0.68079633"
+       id="path5381" />
+    <path
+       id="path5383"
+       d="M 219.81921,87.319 H 0.68079633"
+       style="fill:none;fill-opacity:1;stroke:#ffffff;stroke-width:0.40000001;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       inkscape:connector-curvature="0" />
+  </g>
+  <g
+     inkscape:groupmode="layer"
+     id="layer1"
+     inkscape:label="Layer 3"
+     style="display:inline">
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.40000001;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 0.25,205.25001 h 152.88208 m 53.78799,0 h 3.32996"
+       id="path973"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 145.25002,210.25 V 0.25000128"
+       id="path971"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.40000001;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 205.25001,210.25 v -2.79018 m 0,-10.89792 V 0.25000128"
+       id="path969"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,15.250006 H 210.25003"
+       id="path967"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.40000001;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,155.25001 H 210.25003"
+       id="path965"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.40000001;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 55.249995,210.25 V 0.25000128"
+       id="path963"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 0.25,175.25 h 160.97366 m 43.87229,0 h 5.15408"
+       id="path961"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 125.25003,210.25 V 0.25000128"
+       id="path959"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,35.250001 H 210.25003"
+       id="path957"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 195.25003,210.25 v -3.02405 m 0,-10.68744 0,-10.52373 m 0,-19.79114 0,-165.97363872"
+       id="path955"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 35.25,210.25 V 0.25000128"
+       id="path953"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.40000001;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 5.2500251,210.25 V 0.25000128"
+       id="path951"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,25.249986 H 210.25003"
+       id="path949"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.40000001;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,105.25 H 210.25003"
+       id="path947"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.40000001;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 105.25004,210.25 V 0.25000128"
+       id="path945"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.40000001;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,55.249996 H 210.25003"
+       id="path943"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 185.25001,210.25 v -3.02405 m 0,-10.73421 v -2.8531 m 0,-34.30738 V 0.25000128"
+       id="path941"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 175.25,210.25 v -3.11759 m 0,-51.39092 V 0.25000128"
+       id="path939"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 15.250005,210.25 V 0.25000128"
+       id="path937"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,125.25 H 210.25003"
+       id="path935"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 85.250005,210.25 V 0.25000128"
+       id="path933"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,75.249991 H 210.25003"
+       id="path931"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.40000001;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 155.25,210.25 v -3.02405 m 0,-7.39 V 0.25000128"
+       id="path929"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,0.25000128 V 210.25"
+       id="path927"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.40000001;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,5.2499912 H 210.25003"
+       id="path925"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,145.24999 H 210.25003"
+       id="path923"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 65.25001,210.25 V 0.25000128"
+       id="path921"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,95.250021 H 210.25003"
+       id="path919"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 165.25002,210.25 v -2.79018 m 0,-10.4302 v -13.18975 m 0,-14.82678 V 0.25000128"
+       id="path917"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 135.25001,210.25 V 0.25000128"
+       id="path915"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 210.25003,0.25000128 H 0.25"
+       id="path913"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 0.25,165.25002 h 166.9605 m 26.98754,0 h 16.05199"
+       id="path911"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 45.250015,210.25 V 0.25000128"
+       id="path909"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 115.25001,210.25 V 0.25000128"
+       id="path907"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,45.249981 H 210.25003"
+       id="path905"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 210.25003,210.25 V 0.25000128"
+       id="path903"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 25.25002,210.25 V 0.25000128"
+       id="path901"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 0.25,185.25002 h 166.25892 m 30.26159,0 h 13.47952"
+       id="path899"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,115.25002 H 210.25003"
+       id="path897"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 95.25002,210.25 V 0.25000128"
+       id="path895"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,65.250011 H 210.25003"
+       id="path893"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,210.25 H 210.25003"
+       id="path891"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,85.250006 H 210.25003"
+       id="path889"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="m 0.25,195.25 h 172.9694 m 6.46576,0 h 30.56487"
+       id="path887"
+       inkscape:connector-curvature="0"
+       sodipodi:nodetypes="cccc" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 0.25,135.25001 H 210.25003"
+       id="path885"
+       inkscape:connector-curvature="0" />
+    <path
+       style="fill:none;stroke:#ffffff;stroke-width:0.1;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1"
+       d="M 75.250025,210.25 V 0.25000128"
+       id="path875"
+       inkscape:connector-curvature="0" />
+  </g>
+</svg>
diff --git a/Anycubic/i3megas_bed.stl b/Anycubic/i3megas_bed.stl
new file mode 100644
index 0000000..49ff8c5
--- /dev/null
+++ b/Anycubic/i3megas_bed.stl
diff --git a/Artillery.idx b/Artillery.idx
index d1041e1..918f297 100644
--- a/Artillery.idx
+++ b/Artillery.idx
@@ -1,4 +1,6 @@
 min_slic3r_version = 2.3.1-beta
+0.0.3 Fixed Genius bed size.
+0.0.2 Updated start g-code.
 0.0.2-susi fix first layer height
 0.0.1-susi some little adaptation
 0.0.1 Initial Artillery bundle
diff --git a/Artillery.ini b/Artillery.ini
index b17a067..06e9d87 100644
--- a/Artillery.ini
+++ b/Artillery.ini
@@ -11,7 +11,7 @@
 name = Artillery
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.2-susi
+config_version = 0.0.3
 # Where to get the updates from?
 config_update_url = 
 #https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Artillery/
@@ -101,11 +101,11 @@ end_gcode = G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to a
 
 [printer:*common_STOCK_FW*]
 inherits = *common*
-start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature]; wait for bed to heat up\nM104 S[first_layer_temperature]; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
 
 [printer:*common_UPD_FW*]
 inherits = *common*
-start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12; K factor\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature]; wait for bed to heat up\nM104 S[first_layer_temperature]; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12; K factor\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature]; wait for bed to heat up\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
 
 [printer:Sidewinder X1]
 inherits = *common_STOCK_FW*
@@ -127,7 +127,7 @@ printer_notes = Don't remove the following keywords! These keywords are used in
 inherits = *common_STOCK_FW*
 printer_model = Genius
 printer_variant = 0.4
-bed_shape = 0x0,230x0,230x230,0x230
+bed_shape = 0x0,220x0,220x220,0x220
 max_print_height = 250
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius
 
@@ -135,7 +135,7 @@ printer_notes = Don't remove the following keywords! These keywords are used in
 inherits = *common_UPD_FW*
 printer_model = Genius
 printer_variant = 0.4
-bed_shape = 0x0,230x0,230x230,0x230
+bed_shape = 0x0,220x0,220x220,0x220
 max_print_height = 250
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius
 
@@ -230,7 +230,9 @@ support_material_interface_extruder = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_enforce_layers = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15
 support_material_interface_contact_loops = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
diff --git a/Creality.idx b/Creality.idx
index 106d392..26ab523 100644
--- a/Creality.idx
+++ b/Creality.idx
@@ -1,4 +1,8 @@
+min_slic3r_version = 2.3.2-alpha0
+0.1.0 Added Ender-7, Sermoon D1, CR-10 SMART
 min_slic3r_version = 2.3.1-beta
+0.0.17 Updated start g-code. Added specific start g-code for straingauge printers. Improved output filename format. Added filament profile.
+0.0.16 Updated CR6-SE start g-code. Added and updated filament profiles.
 0.0.16-susi ender-3 bltouch fix (again)
 0.0.15 Added new printer models, filament profiles. Various improvements.
 min_slic3r_version = 2.3.0-rc2
diff --git a/Creality.ini b/Creality.ini
index 420d289..5ee7f38 100644
--- a/Creality.ini
+++ b/Creality.ini
@@ -5,7 +5,7 @@
 name = Creality
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.16-susi
+config_version = 0.1.0
 # Where to get the updates from?
 config_update_url = 
 # https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
@@ -26,7 +26,7 @@ technology = FFF
 family = ENDER
 bed_model = ender3_bed.stl
 bed_texture = ender3.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER3BLTOUCH]
 name = Creality Ender-3 BLTouch
@@ -35,7 +35,7 @@ technology = FFF
 family = ENDER
 bed_model = ender3_bed.stl
 bed_texture = ender3.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER3V2]
 name = Creality Ender-3 V2
@@ -44,7 +44,7 @@ technology = FFF
 family = ENDER
 bed_model = ender3v2_bed.stl
 bed_texture = ender3v2.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER3MAX]
 name = Creality Ender-3 Max
@@ -53,7 +53,7 @@ technology = FFF
 family = ENDER
 bed_model = cr10v2_bed.stl
 bed_texture = cr10spro.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER4]
 name = Creality Ender-4
@@ -62,7 +62,7 @@ technology = FFF
 family = ENDER
 bed_model = ender3v2_bed.stl
 bed_texture = ender3v2.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER5]
 name = Creality Ender-5
@@ -71,7 +71,7 @@ technology = FFF
 family = ENDER
 bed_model = ender3_bed.stl
 bed_texture = ender3.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER5PLUS]
 name = Creality Ender-5 Plus
@@ -80,7 +80,7 @@ technology = FFF
 family = ENDER
 bed_model = ender5plus_bed.stl
 bed_texture = ender5plus.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER6]
 name = Creality Ender-6
@@ -89,7 +89,16 @@ technology = FFF
 family = ENDER
 bed_model = ender6_bed.stl
 bed_texture = ender6.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:ENDER7]
+name = Creality Ender-7
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = ENDER
+bed_model = ender7_bed.stl
+bed_texture = ender7.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER2]
 name = Creality Ender-2
@@ -98,7 +107,7 @@ technology = FFF
 family = ENDER
 bed_model = ender2_bed.stl
 bed_texture = ender2.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR5PRO]
 name = Creality CR-5 Pro
@@ -107,7 +116,7 @@ technology = FFF
 family = CR
 bed_model = cr5pro_bed.stl
 bed_texture = cr5pro.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR5PROH]
 name = Creality CR-5 Pro H
@@ -116,7 +125,7 @@ technology = FFF
 family = CR
 bed_model = cr5pro_bed.stl
 bed_texture = cr5pro.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR6SE]
 name = Creality CR-6 SE
@@ -125,7 +134,7 @@ technology = FFF
 family = CR
 bed_model = cr6se_bed.stl
 bed_texture = cr6se.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR6MAX]
 name = Creality CR-6 Max
@@ -134,7 +143,16 @@ technology = FFF
 family = CR
 bed_model = cr10s4_bed.stl
 bed_texture = cr10s4.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR10SMART]
+name = Creality CR-10 SMART
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = CR10
+bed_model = cr10v2_bed.stl
+bed_texture = cr10spro.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10MINI]
 name = Creality CR-10 Mini
@@ -143,7 +161,7 @@ technology = FFF
 family = CR10
 bed_model = cr10mini_bed.stl
 bed_texture = cr10mini.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10MAX]
 name = Creality CR-10 Max
@@ -152,7 +170,7 @@ technology = FFF
 family = CR
 bed_model = cr10max_bed.stl
 bed_texture = cr10max.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10]
 name = Creality CR-10
@@ -161,7 +179,7 @@ technology = FFF
 family = CR10
 bed_model = cr10_bed.stl
 bed_texture = cr10.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10V2]
 name = Creality CR-10 V2
@@ -170,7 +188,7 @@ technology = FFF
 family = CR10
 bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10V3]
 name = Creality CR-10 V3
@@ -179,7 +197,7 @@ technology = FFF
 family = CR10
 bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10S]
 name = Creality CR-10 S
@@ -188,7 +206,7 @@ technology = FFF
 family = CR10
 bed_model = cr10_bed.stl
 bed_texture = cr10.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10SPRO]
 name = Creality CR-10 S Pro
@@ -197,7 +215,7 @@ technology = FFF
 family = CR10
 bed_model = cr10v2_bed.stl
 bed_texture = cr10spro.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10SPROV2]
 name = Creality CR-10 S Pro V2
@@ -206,7 +224,7 @@ technology = FFF
 family = CR10
 bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10S4]
 name = Creality CR-10 S4
@@ -215,7 +233,7 @@ technology = FFF
 family = CR10 XL
 bed_model = cr10s4_bed.stl
 bed_texture = cr10s4.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10S5]
 name = Creality CR-10 S5
@@ -224,7 +242,7 @@ technology = FFF
 family = CR10 XL
 bed_model = cr10s5_bed.stl
 bed_texture = cr10s5.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR20]
 name = Creality CR-20
@@ -233,7 +251,7 @@ technology = FFF
 family = CR20
 bed_model = ender3_bed.stl
 bed_texture = cr20.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR20PRO]
 name = Creality CR-20 Pro
@@ -242,7 +260,7 @@ technology = FFF
 family = CR20
 bed_model = ender3_bed.stl
 bed_texture = cr20.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR200B]
 name = Creality CR-200B
@@ -251,7 +269,7 @@ technology = FFF
 family = CR
 bed_model = cr200b_bed.stl
 bed_texture = cr200b.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR8]
 name = Creality CR-8
@@ -260,7 +278,7 @@ technology = FFF
 family = CR
 bed_model = cr8_bed.stl
 bed_texture = cr8.svg
-default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 #[printer_model:CRX]
 #name = Creality CR-X
@@ -269,7 +287,7 @@ default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @
 #family = CR-X
 #bed_model = cr10v2_bed.stl
 #bed_texture = cr10spro.svg
-#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 #[printer_model:CRXPRO]
 #name = Creality CR-X Pro
@@ -278,7 +296,17 @@ default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @
 #family = CR-X
 #bed_model = cr10v2_bed.stl
 #bed_texture = cr10spro.svg
-#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:SERMOOND1]
+name = Creality Sermoon-D1
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = SERMOON
+bed_model = sermoond1_bed.stl
+bed_texture = sermoond1.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
 
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
@@ -330,7 +358,7 @@ overhangs_width = 80%
 only_one_perimeter_top = 1
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+output_filename_format = {input_filename_base}_{print_time}_{layer_height}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
 over_bridge_flow_ratio = 120%
 perimeters = 2
 perimeter_extruder = 1
@@ -410,7 +438,7 @@ layer_height = 0.08
 perimeters = 3
 bottom_solid_layers = 9
 top_solid_layers = 11
-bridge_flow_ratio = 0.70
+bridge_flow_ratio = 70%
 
 [print:*0.10mm*]
 inherits = *common*
@@ -418,7 +446,7 @@ layer_height = 0.10
 perimeters = 3
 bottom_solid_layers = 7
 top_solid_layers = 9
-bridge_flow_ratio = 0.70
+bridge_flow_ratio = 70%
 
 [print:*0.12mm*]
 inherits = *common*
@@ -426,14 +454,14 @@ layer_height = 0.12
 perimeters = 3
 bottom_solid_layers = 6
 top_solid_layers = 7
-bridge_flow_ratio = 0.70
+bridge_flow_ratio = 70%
 
 [print:*0.16mm*]
 inherits = *common*
 layer_height = 0.16
 bottom_solid_layers = 5
 top_solid_layers = 7
-bridge_flow_ratio = 0.85
+bridge_flow_ratio = 85%
 
 [print:*0.20mm*]
 inherits = *common*
@@ -464,36 +492,36 @@ top_solid_layers = 4
 
 [print:0.08mm HIGHDETAIL @CREALITY]
 inherits = *0.08mm*
-compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
 
 [print:0.10mm HIGHDETAIL @CREALITY]
 inherits = *0.10mm*
 renamed_from = "0.10mm HIGHDETAIL @ENDER3"
-compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
 
 [print:0.12mm DETAIL @CREALITY]
 inherits = *0.12mm*
 renamed_from = "0.12mm DETAIL @ENDER3"
-compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
 
 [print:0.16mm OPTIMAL @CREALITY]
 inherits = *0.16mm*
 renamed_from = "0.15mm OPTIMAL @ENDER3"; "0.15mm OPTIMAL @CREALITY"
-compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
 
 [print:0.20mm NORMAL @CREALITY]
 inherits = *0.20mm*
 renamed_from = "0.20mm NORMAL @ENDER3"
-compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
 
 [print:0.24mm DRAFT @CREALITY]
 inherits = *0.24mm*
 renamed_from = "0.24mm DRAFT @ENDER3"
-compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
 
 [print:0.28mm SUPERDRAFT @CREALITY]
 inherits = *0.28mm*
-compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
 
 # When submitting new filaments please print the following temperature tower at 0.1mm layer height:
 #   https://www.thingiverse.com/thing:2615842
@@ -669,10 +697,24 @@ first_layer_bed_temperature = 60
 filament_cost = 19.00
 filament_density = 1.24
 filament_colour = #FF0000
+filament_spool_weight = 256
 
-[filament:Devil Design PLA (Galaxy) @CREALITY]
+[filament:Devil Design PLA Matt @CREALITY]
 inherits = *PLA*
 filament_vendor = Devil Design
+temperature = 205
+bed_temperature = 60
+first_layer_temperature = 205
+first_layer_bed_temperature = 60
+filament_cost = 20.00
+filament_density = 1.38
+filament_colour = #FF0000
+filament_spool_weight = 256
+
+[filament:Devil Design PLA Galaxy @CREALITY]
+inherits = *PLA*
+renamed_from = "Devil Design PLA (Galaxy) @CREALITY"
+filament_vendor = Devil Design
 temperature = 225
 bed_temperature = 65
 first_layer_temperature = 225
@@ -680,6 +722,7 @@ first_layer_bed_temperature = 65
 filament_cost = 19.00
 filament_density = 1.24
 filament_colour = #FF0000
+filament_spool_weight = 256
 
 [filament:Extrudr PLA NX2 @CREALITY]
 inherits = *PLA*
@@ -738,6 +781,18 @@ filament_density = 1.24
 filament_colour = #125467
 filament_spool_weight = 238
 
+[filament:3DJAKE ecoPLA Matt @CREALITY]
+inherits = *PLA*
+filament_vendor = 3DJAKE
+temperature = 195
+bed_temperature = 60
+first_layer_temperature = 195
+first_layer_bed_temperature = 60
+filament_cost = 24.99
+filament_density = 1.38
+filament_colour = #125467
+filament_spool_weight = 238
+
 [filament:3DJAKE ecoPLA Tough @CREALITY]
 inherits = *PLA*
 filament_vendor = 3DJAKE
@@ -796,7 +851,7 @@ filament_colour = #C7F935
 # Common printer preset
 [printer:*common*]
 printer_technology = FFF
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n\n
 between_objects_gcode = 
 pause_print_gcode = 
 deretract_speed = 40
@@ -821,7 +876,7 @@ machine_max_jerk_y = 8
 machine_max_jerk_z = 0.4
 machine_min_extruding_rate = 0
 machine_min_travel_rate = 0
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
 max_layer_height = 0.28
 min_layer_height = 0.08
 max_print_height = 250
@@ -851,16 +906,20 @@ z_step = 0.04
 printer_model = 
 default_print_profile = 0.16mm OPTIMAL @CREALITY
 default_filament_profile = Generic PLA @CREALITY
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
 
+# Intended for printers equipped with a strain gauge mechanism, like the CR-6 series
+[printer:*straingauge*]
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[initial_extruder]} ; set final bed temp\nM109 S{first_layer_temperature[initial_extruder]-50} ; set temporary nozzle temp to prevent oozing during homing\nM190 S{first_layer_bed_temperature[initial_extruder]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set final nozzle temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+
 # Intended for printers with a smaller bed, like the Ender-3 series
 [printer:*fastabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[initial_extruder]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[initial_extruder]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 
 # Intended for printers with a larger bed, like the CR-10 series
 [printer:*slowabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[initial_extruder]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM190 S{first_layer_bed_temperature[initial_extruder]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set final nozzle temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 
 # Intended for printers with vendor official firmware verified to support M25
 [printer:*pauseprint*]
@@ -1146,6 +1205,25 @@ inherits = *Creality Ender-6*; *0.5nozzle*
 [printer:Creality Ender-6 0.6mm]
 inherits = *Creality Ender-6*; *0.6nozzle*
 
+[printer:*Creality Ender-7*]
+inherits = *common*; *descendingz*
+bed_shape = 5x5,245x5,245x245,5x245
+max_print_height = 300
+printer_model = ENDER7
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER7\nPRINTER_HAS_BOWDEN
+
+[printer:Creality Ender-7 0.4mm]
+inherits = *Creality Ender-7*; *0.4nozzle*
+
+[printer:Creality Ender-7 0.3mm]
+inherits = *Creality Ender-7*; *0.3nozzle*
+
+[printer:Creality Ender-7 0.5mm]
+inherits = *Creality Ender-7*; *0.5nozzle*
+
+[printer:Creality Ender-7 0.6mm]
+inherits = *Creality Ender-7*; *0.6nozzle*
+
 [printer:*Creality Ender-2*]
 inherits = *SmallBowden*
 bed_shape = 0x0,150x0,150x150,0x150
@@ -1207,7 +1285,7 @@ inherits = *Creality CR-5 Pro H*; *0.5nozzle*
 inherits = *Creality CR-5 Pro H*; *0.6nozzle*
 
 [printer:*Creality CR-6 SE*]
-inherits = *common*; *fastabl*; *pauseprint*
+inherits = *common*; *straingauge*; *pauseprint*
 bed_shape = 5x0,230x0,230x235,5x235
 printer_model = CR6SE
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR6SE\nPRINTER_HAS_BOWDEN
@@ -1225,7 +1303,7 @@ inherits = *Creality CR-6 SE*; *0.5nozzle*
 inherits = *Creality CR-6 SE*; *0.6nozzle*
 
 [printer:*Creality CR-6 Max*]
-inherits = *common*; *slowabl*
+inherits = *common*; *straingauge*
 retract_length = 6
 bed_shape = 5x5,395x5,395x395,5x395
 max_print_height = 400
@@ -1244,6 +1322,26 @@ inherits = *Creality CR-6 Max*; *0.5nozzle*
 [printer:Creality CR-6 Max 0.6mm]
 inherits = *Creality CR-6 Max*; *0.6nozzle*
 
+[printer:*Creality CR-10 SMART*]
+inherits = *common*; *straingauge*
+retract_length = 6
+bed_shape = 5x5,295x5,295x295,5x295
+max_print_height = 400
+printer_model = CR10SMART
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SMART\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-10 SMART 0.4mm]
+inherits = *Creality CR-10 SMART*; *0.4nozzle*
+
+[printer:Creality CR-10 SMART 0.3mm]
+inherits = *Creality CR-10 SMART*; *0.3nozzle*
+
+[printer:Creality CR-10 SMART 0.5mm]
+inherits = *Creality CR-10 SMART*; *0.5nozzle*
+
+[printer:Creality CR-10 SMART 0.6mm]
+inherits = *Creality CR-10 SMART*; *0.6nozzle*
+
 [printer:*Creality CR-10 Mini*]
 inherits = *SmallBowden*
 retract_length = 6
@@ -1489,3 +1587,23 @@ inherits = *Creality CR-8*; *0.5nozzle*
 
 [printer:Creality CR-8 0.6mm]
 inherits = *Creality CR-8*; *0.6nozzle*
+
+[printer:*Creality Sermoon-D1*]
+inherits = *common*; *descendingz*
+retract_length = 1
+bed_shape = 5x5,275x5,275x255,5x255
+max_print_height = 310
+printer_model = SERMOOND1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_SERMOOND1\nPRINTER_HAS_BOWDEN
+
+[printer:Creality Sermoon-D1 0.4mm]
+inherits = *Creality Sermoon-D1*; *0.4nozzle*
+
+[printer:Creality Sermoon-D1 0.3mm]
+inherits = *Creality Sermoon-D1*; *0.3nozzle*
+
+[printer:Creality Sermoon-D1 0.5mm]
+inherits = *Creality Sermoon-D1*; *0.5nozzle*
+
+[printer:Creality Sermoon-D1 0.6mm]
+inherits = *Creality Sermoon-D1*; *0.6nozzle*
diff --git a/Creality/CR10SMART_thumbnail.png b/Creality/CR10SMART_thumbnail.png
new file mode 100644
index 0000000..3417266
--- /dev/null
+++ b/Creality/CR10SMART_thumbnail.png
diff --git a/Creality/ENDER7_thumbnail.png b/Creality/ENDER7_thumbnail.png
new file mode 100644
index 0000000..0ede964
--- /dev/null
+++ b/Creality/ENDER7_thumbnail.png
diff --git a/Creality/SERMOOND1_thumbnail.png b/Creality/SERMOOND1_thumbnail.png
new file mode 100644
index 0000000..666db4d
--- /dev/null
+++ b/Creality/SERMOOND1_thumbnail.png
diff --git a/Creality/ender7.svg b/Creality/ender7.svg
new file mode 100644
index 0000000..29e9375
--- /dev/null
+++ b/Creality/ender7.svg
@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="240mm" height="240mm" version="1.1" viewBox="0 0 240 240" xmlns="http://www.w3.org/2000/svg">
+  <rect x=".25" y=".25" width="239.5" height="239.5" fill="none" stroke="#fff" stroke-width=".5"/>
+</svg>
diff --git a/Creality/ender7_bed.stl b/Creality/ender7_bed.stl
new file mode 100644
index 0000000..9cf19e4
--- /dev/null
+++ b/Creality/ender7_bed.stl
diff --git a/Creality/sermoond1.svg b/Creality/sermoond1.svg
new file mode 100644
index 0000000..1a93d95
--- /dev/null
+++ b/Creality/sermoond1.svg
@@ -0,0 +1,4 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg width="270mm" height="250mm" version="1.1" viewBox="0 0 270 250" xmlns="http://www.w3.org/2000/svg">
+  <rect x=".25" y=".25" width="269.5" height="249.5" fill="none" stroke="#fff" stroke-width=".5"/>
+</svg>
diff --git a/Creality/sermoond1_bed.stl b/Creality/sermoond1_bed.stl
new file mode 100644
index 0000000..edab280
--- /dev/null
+++ b/Creality/sermoond1_bed.stl
diff --git a/FLSun.idx b/FLSun.idx
index 598ff0f..8c681fb 100644
--- a/FLSun.idx
+++ b/FLSun.idx
@@ -1,2 +1,3 @@
 min_slic3r_version = 2.3.0-rc2

+0.0.2-susi susi adaptation

 0.0.1 Initial Version

diff --git a/FLSun.ini b/FLSun.ini
index 0be01a2..a0cbfd4 100644
--- a/FLSun.ini
+++ b/FLSun.ini
@@ -7,7 +7,7 @@
 name = FLSun

 # Configuration version of this file. Config file will only be installed, if the config_version differs.

 # This means, the server may force the PrusaSlicer configuration to be downgraded.

-config_version = 0.0.1

+config_version = 0.0.2-susi

 # Where to get the updates from?

 config_update_url = 

 #https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/FLSun/

@@ -44,7 +44,7 @@ avoid_crossing_perimeters_max_detour = 0
 bottom_solid_min_thickness = 0.5

 bridge_acceleration = 800

 bridge_angle = 0

-bridge_flow_ratio = 0.8

+bridge_flow_ratio = 80%

 bridge_speed = 30

 brim_width = 0

 clip_multipart_objects = 1

@@ -52,7 +52,7 @@ compatible_printers =
 complete_objects = 0

 default_acceleration = 800

 dont_support_bridges = 1

-elefant_foot_compensation = 0.2

+first_layer_size_compensation = -0.2

 ensure_vertical_shell_thickness = 1

 external_fill_pattern = rectilinear

 external_perimeters_first = 0

@@ -122,7 +122,9 @@ support_material_interface_extruder = 0
 support_material_angle = 0

 support_material_buildplate_only = 0

 support_material_enforce_layers = 0

-support_material_contact_distance = 0.2

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.2
+support_material_contact_distance_bottom = 0.2

 support_material_interface_contact_loops = 0

 support_material_interface_layers = 2

 support_material_interface_spacing = 0.2

@@ -171,7 +173,7 @@ perimeter_acceleration = 800
 

 [print:*0.6nozzleFLSUN*]

 bridge_acceleration = 1000

-bridge_flow_ratio = 0.95

+bridge_flow_ratio = 95%

 bridge_speed = 25

 default_acceleration = 1000

 external_perimeter_extrusion_width = 0.65

@@ -186,7 +188,9 @@ perimeter_acceleration = 800
 perimeter_extrusion_width = 0.65

 solid_infill_extrusion_width = 0.68

 support_material_speed = 40

-support_material_contact_distance = 0.15

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15

 support_material_extrusion_width = 0.55

 support_material_xy_spacing = 80%

 top_infill_extrusion_width = 0.6

@@ -201,9 +205,11 @@ output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{filament_t
 [print:*0.08mm_flsunq*]

 inherits = *common_flsunq*

 bottom_solid_layers = 10

-bridge_flow_ratio = 0.7

+bridge_flow_ratio = 70%

 layer_height = 0.08

-support_material_contact_distance = 0.06

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.06
+support_material_contact_distance_bottom = 0.06

 support_material_spacing = 1.5

 top_solid_layers = 12

 

@@ -234,8 +240,8 @@ top_solid_infill_speed = 60%
 inherits = *common_flsunq*

 avoid_crossing_perimeters = 1

 bottom_solid_min_thickness = 0.5

-bridge_flow_ratio = 0.9

-elefant_foot_compensation = 0.15

+bridge_flow_ratio = 90%

+first_layer_size_compensation = -0.15

 ensure_vertical_shell_thickness = 1

 external_perimeter_extrusion_width = 0.9

 extra_perimeters = 1

@@ -294,9 +300,11 @@ solid_infill_speed = 80%
 [print:*0.16mm_flsunq*]

 inherits = *common_flsunq*

 bottom_solid_layers = 5

-bridge_flow_ratio = 0.9

+bridge_flow_ratio = 90%

 layer_height = 0.16

-support_material_contact_distance = 0.12

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.12
+support_material_contact_distance_bottom = 0.12

 top_solid_layers = 6

 

 [print:0.16mm QUALITY @FLSUN]

@@ -342,9 +350,11 @@ solid_infill_extrusion_width = 0.65
 [print:*0.20mm_flsunq*]

 inherits = *common_flsunq*

 bottom_solid_layers = 4

-bridge_flow_ratio = 0.95

+bridge_flow_ratio = 95%

 layer_height = 0.20

-support_material_contact_distance = 0.2

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.2
+support_material_contact_distance_bottom = 0.2

 top_solid_layers = 5

 

 [print:0.20mm QUALITY @FLSUN]

@@ -396,9 +406,11 @@ top_solid_infill_speed = 40%
 [print:*0.24mm_flsunq*]

 inherits = *common_flsunq*

 bottom_solid_layers = 4

-bridge_flow_ratio = 0.95

+bridge_flow_ratio = 95%

 layer_height = 0.24

-support_material_contact_distance = 0.18

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.18
+support_material_contact_distance_bottom = 0.18

 top_solid_layers = 4

 

 [print:0.24mm DRAFT @FLSUN]

@@ -419,14 +431,16 @@ top_solid_infill_speed = 50%
 [print:*0.30mm_flsunq*]

 inherits = *common_flsunq*

 bottom_solid_layers = 3

-bridge_flow_ratio = 0.95

+bridge_flow_ratio = 95%

 external_perimeter_extrusion_width = 0.6

 extrusion_width = 0.5

 infill_extrusion_width = 0.5

 layer_height = 0.30

 perimeter_extrusion_width = 0.5

 solid_infill_extrusion_width = 0.5

-support_material_contact_distance = 0.22

+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.22
+support_material_contact_distance_bottom = 0.22

 top_infill_extrusion_width = 0.45

 top_solid_layers = 4

 

@@ -775,7 +789,7 @@ retract_length = 5
 retract_speed = 30

 retract_lift = 0.4

 silent_mode = 1

-start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S[first_layer_temperature] ; set extruder final temp\nM109 S[first_layer_temperature] ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200     ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250       ; wait between dual beep\nM300 S440 P200     ; 2nd beep for printer ready\nG4 S10             ; wait to clean the nozzle\nM300 S440 P200     ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [input_filename]; Display: Printing started...

+start_gcode = ;STARTGCODE\nM117 Initializing\n; Set coordinate modes\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n; Reset speed and extrusion rates\nM200 D0 ; disable volumetric E\nM220 S100 ; reset speed\n; Set initial warmup temps\nM117 Nozzle preheat\nM104 S100 ; preheat extruder to no ooze temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S40 P10 ; Bip\n; Home\nM117 Homing\nG28 ; home all with default mesh bed level\n; For ABL users put G29 for a leveling request\n; Final warmup routine\nM117 Final warmup\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder final temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder final temp\nM190 S[first_layer_bed_temperature] ; wait for bed final temp\nM300 S440 P200     ; 1st beep for printer ready and allow some time to clean nozzle\nM300 S0 P250       ; wait between dual beep\nM300 S440 P200     ; 2nd beep for printer ready\nG4 S10             ; wait to clean the nozzle\nM300 S440 P200     ; 3rd beep for ready to start printing\n; Prime line routine\nM117 Printing prime line\n;M900 K0; Disable Linear Advance (Marlin) for prime line\nG92 E0.0; reset extrusion distance\nG1 X-54.672 Y-95.203 Z0.3 F4000; go outside print area\nG92 E0.0; reset extrusion distance\nG1 E2 F1000 ; de-retract and push ooze\nG3 X38.904 Y-102.668 I54.672 J95.105 E20.999\nG3 X54.671 Y-95.203 I-38.815 J102.373 E5.45800\nG92 E0.0\nG1 E-5 F3000 ; retract 5mm\nG1 X52.931 Y-96.185 F1000 ; wipe\nG1 X50.985 Y-97.231 F1000 ; wipe\nG1 X49.018 Y-98.238 F1000 ; wipe\nG1 X0 Y-109.798 F1000\nG1 E4.8 F1500; de-retract\nG92 E0.0 ; reset extrusion distance\n; Final print adjustments\nM117 Preparing to print\n;M82 ; extruder absolute mode\nM221 S{if layer_height<0.075}100{else}95{endif}\nM300 S40 P10 ; chirp\nM117 Print [input_filename]; Display: Printing started...

 thumbnails = 16x16,260x260

 use_relative_e_distances = 1

 use_volumetric_e = 0

@@ -819,7 +833,7 @@ printer_variant = 0.4
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_FLSun\nPRINTER_MODEL_Q5\nPRINTER_HAS_BOWDEN\n

 retract_length = 3

 retract_lift = 0.3

-start_gcode = ;STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n

+start_gcode = ;STARTGCODE\nM117 Initializing\n; G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM107\nG28 ;Home\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\n\nG92 E0\nG1 X-98 Y0 Z0.2 F4000 ; move to arc start\nG3 X0 Y-98 I98 Z0.2 E40 F400 ; lay arc stripe 90deg\nG0 Z1 \nG92 E0.0\n

 thumbnails = 16x16,200x200

 use_relative_e_distances = 1

 use_volumetric_e = 0

diff --git a/INAT.idx b/INAT.idx
index 054586a..6d550a2 100644
--- a/INAT.idx
+++ b/INAT.idx
@@ -1,4 +1,5 @@
 min_slic3r_version = 2.3.1-beta
+0.0.3-susi2 susi fixes
 0.0.3-susi adaptation
 0.0.2 Improved start gcode, changed filename format
 0.0.1 Initial version
diff --git a/INAT.ini b/INAT.ini
index 4bfbcec..7d641e6 100644
--- a/INAT.ini
+++ b/INAT.ini
@@ -3,7 +3,7 @@
 [vendor]
 # Vendor name will be shown by the Config Wizard.
 name = INAT
-config_version = 0.0.3-susi
+config_version = 0.0.3-susi2
 config_update_url =
 # https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/INAT/
 
@@ -76,7 +76,9 @@ support_material_auto = 1
 support_material_threshold = 0
 support_material_enforce_layers = 0
 raft_layers = 0
-support_material_contact_distance = 0.2
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.2
+support_material_contact_distance_bottom = 0.2
 support_material_pattern = rectilinear
 support_material_with_sheath = 0
 support_material_spacing = 5
@@ -127,7 +129,7 @@ bridge_flow_ratio = 1
 slice_closing_radius = 0.049
 resolution = 0
 xy_size_compensation = 0
-elefant_foot_compensation = 0.3
+first_layer_size_compensation = -0.3
 clip_multipart_objects = 0
 #output
 complete_objects = 0
diff --git a/PrusaResearch.idx b/PrusaResearch.idx
index 0be9369..d20be0f 100644
--- a/PrusaResearch.idx
+++ b/PrusaResearch.idx
@@ -1,4 +1,9 @@
+min_slic3r_version = 2.3.2-alpha0
+1.3.0 Added SL1S SPEED profiles.
 min_slic3r_version = 2.3.0-rc1
+1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
+1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
+1.2.5 Updated firmware version. Added filament profiles. Various improvements.
 1.2.4 Updated cost/density values in filament settings. Various changes in print settings.
 1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles.
 1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. 
diff --git a/PrusaResearch.ini b/PrusaResearch.ini
index 94f3a0e..3708aa6 100644
--- a/PrusaResearch.ini
+++ b/PrusaResearch.ini
@@ -1,19 +1,15 @@
 # Print profiles for the Prusa Research printers.
-# it's a modified version for superslicer, this one is not endorsed by prusaresearch.
 
 [vendor]
 # Vendor name will be shown by the Config Wizard.
-name = Prusa {technology}
-full_name = Prusa Research {technology} Technology Printers
-technologies = FFF; SLA
-
+name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.2.4
+config_version = 1.3.0
 # Where to get the updates from?
-config_update_url =
-changelog_url = 
-#http://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
+config_update_url = 
+#https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
+#changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
@@ -29,7 +25,7 @@ technology = FFF
 family = MINI
 bed_model = mini_bed.stl
 bed_texture = mini.svg
-default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI; Prusament PVB
+default_materials = Generic PLA; Generic ABS @MINI; Generic PETG @MINI; Prusament PLA; Prusament PETG @MINI; Prusament ASA @MINI; Prusament PC Blend @MINI; Prusament PC Blend Carbon Fiber @MINI; Prusament PVB
 
 [printer_model:MK3S]
 name = Original Prusa i3 MK3S && MK3S+
@@ -38,7 +34,7 @@ technology = FFF
 family = MK3
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB
 
 [printer_model:MK3]
 name = Original Prusa i3 MK3
@@ -47,7 +43,7 @@ technology = FFF
 family = MK3
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB
 
 [printer_model:MK3SMMU2S]
 name = Original Prusa i3 MK3S && MK3S+ MMU2S
@@ -56,7 +52,7 @@ technology = FFF
 family = MK3
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2
 
 [printer_model:MK3MMU2]
 name = Original Prusa i3 MK3 MMU2
@@ -65,7 +61,7 @@ technology = FFF
 family = MK3
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2
 
 [printer_model:MK2.5S]
 name = Original Prusa i3 MK2.5S
@@ -74,7 +70,7 @@ technology = FFF
 family = MK2.5
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB
 
 [printer_model:MK2.5]
 name = Original Prusa i3 MK2.5
@@ -83,7 +79,7 @@ technology = FFF
 family = MK2.5
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PC Blend Carbon Fiber; Prusament PVB
 
 [printer_model:MK2.5SMMU2S]
 name = Original Prusa i3 MK2.5S MMU2S
@@ -92,7 +88,7 @@ technology = FFF
 family = MK2.5
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2
 
 [printer_model:MK2.5MMU2]
 name = Original Prusa i3 MK2.5 MMU2
@@ -101,7 +97,7 @@ technology = FFF
 family = MK2.5
 bed_model = mk3_bed.stl
 bed_texture = mk3.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PVB @MMU2
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA @MMU2; Prusament PETG @MMU2; Prusament ASA @MMU2; Verbatim BVOH @MMU2; Prusament PC Blend @MMU2; Prusament PC Blend Carbon Fiber @MMU2; Prusament PVB @MMU2
 
 [printer_model:MK2S]
 name = Original Prusa i3 MK2S
@@ -110,7 +106,7 @@ technology = FFF
 family = MK2
 bed_model = mk2_bed.stl
 bed_texture = mk2.svg
-default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend; Prusament PVB
+default_materials = Generic PLA; Generic ABS; Generic PETG; Prusament PLA; Prusament PETG; Prusament ASA; Prusament PC Blend @MK2; Prusament PC Blend Carbon Fiber @MK2; Prusament PVB
 
 [printer_model:MK2SMM]
 name = Original Prusa i3 MK2S MMU1
@@ -119,7 +115,7 @@ technology = FFF
 family = MK2
 bed_model = mk2_bed.stl
 bed_texture = mk2.svg
-default_materials =  Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA; Prusament PETG @MMU1; Prusament ASA; Prusament PC Blend; Prusament PVB
+default_materials =  Generic PLA; Generic ABS; Generic PETG @MMU1; Prusament PLA; Prusament PETG @MMU1; Prusament ASA; Prusament PC Blend @MK2; Prusament PC Blend Carbon Fiber @MK2; Prusament PVB
 
 [printer_model:SL1]
 name = Original Prusa SL1
@@ -130,6 +126,15 @@ bed_model = sl1_bed.stl
 bed_texture = sl1.svg
 default_materials = Prusa Orange Tough @0.05
 
+[printer_model:SL1S]
+name = Original Prusa SL1S SPEED
+variants = default
+technology = SLA
+family = SL1
+bed_model = sl1s_bed.stl
+bed_texture = sl1s.svg
+default_materials = Prusa Orange Tough @0.05 SL1S
+
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
 
@@ -140,11 +145,8 @@ avoid_crossing_perimeters = 0
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 80%
-over_bridge_flow_ratio = 120%
-fill_top_flow_ratio = 100%
 bridge_speed = 20
 brim_width = 0
-bottom_fill_pattern = rectilinear
 clip_multipart_objects = 1
 compatible_printers = 
 complete_objects = 0
@@ -152,6 +154,7 @@ default_acceleration = 1000
 dont_support_bridges = 1
 first_layer_size_compensation = -0.2
 ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
 external_perimeters_first = 0
 external_perimeter_extrusion_width = 0.45
 extra_perimeters = 0
@@ -191,7 +194,7 @@ perimeter_extrusion_width = 0.45
 post_process = 
 print_settings_id = 
 raft_layers = 0
-seam_position = near
+seam_position = nearest
 seam_travel_cost = 20%
 single_extruder_multi_material_priming = 1
 skirts = 1
@@ -229,7 +232,7 @@ thin_perimeters = 1
 thin_walls = 1
 thin_walls_min_width = 50%
 thin_walls_overlap = 50%
-top_fill_pattern = smooth
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.45
 top_solid_infill_speed = 40
 travel_speed = 180
@@ -331,7 +334,9 @@ perimeter_extrusion_width = 0.65
 solid_infill_extrusion_width = 0.65
 top_infill_extrusion_width = 0.6
 support_material_extrusion_width = 0.55
-support_material_contact_distance = 0.15
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15
 support_material_xy_spacing = 80%
 support_material_interface_spacing = 0.3
 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
@@ -348,7 +353,9 @@ perimeter_extrusion_width = 0.9
 solid_infill_extrusion_width = 0.9
 top_infill_extrusion_width = 0.8
 support_material_extrusion_width = 0.7
-support_material_contact_distance = 0.25
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.25
+support_material_contact_distance_bottom = 0.25
 support_material_interface_spacing = 0.4
 support_material_interface_speed = 100%
 support_material_spacing = 2
@@ -366,7 +373,7 @@ first_layer_height = 0.3
 infill_overlap = 30%
 bridge_speed = 22
 gap_fill_speed = 30
-bridge_flow_ratio = 0.9
+bridge_flow_ratio = 90%
 perimeter_acceleration = 800
 infill_acceleration = 1000
 bridge_acceleration = 1000
@@ -403,9 +410,10 @@ support_material_interface_speed = 100%
 overhangs = 1
 skirts = 0
 support_material = 1
-support_material_contact_distance_type = filament
+support_material_contact_distance_type = none
 support_material_contact_distance_top = 0
 support_material_contact_distance_bottom = 0
+
 support_material_extruder = 4
 support_material_extrusion_width = 0.45
 support_material_interface_extruder = 4
@@ -435,7 +443,7 @@ infill_speed = 30
 max_print_speed = 80
 small_perimeter_speed = 20
 solid_infill_speed = 30
-support_material_extrusion_width = 0.3
+support_material_extrusion_width = 0.33
 support_material_spacing = 1.5
 layer_height = 0.05
 perimeter_acceleration = 300
@@ -497,7 +505,7 @@ infill_speed = 40
 max_print_speed = 80
 small_perimeter_speed = 20
 solid_infill_speed = 40
-support_material_extrusion_width = 0.3
+support_material_extrusion_width = 0.33
 support_material_spacing = 1.5
 layer_height = 0.07
 perimeter_acceleration = 300
@@ -605,8 +613,9 @@ top_infill_extrusion_width = 0.4
 top_solid_layers = 7
 
 # MK2 #
-[print:0.15mm 100mms Linear Advance]
+[print:0.15mm 100mms]
 inherits = *0.15mm*
+renamed_from = "0.15mm 100mms Linear Advance"
 bridge_flow_ratio = 95%
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
 external_perimeter_speed = 50
@@ -751,8 +760,9 @@ top_infill_extrusion_width = 0.4
 top_solid_layers = 5
 
 # MK2 #
-[print:0.20mm 100mms Linear Advance]
+[print:0.20mm 100mms]
 inherits = *0.20mm*
+renamed_from = "0.20mm 100mms Linear Advance"
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4
 external_perimeter_speed = 50
 infill_speed = 100
@@ -970,8 +980,9 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 first_layer_extrusion_width = 0.42
 perimeter_extrusion_width = 0.43
 solid_infill_extrusion_width = 0.7
-top_infill_extrusion_width = 0.43
+top_infill_extrusion_width = 0.45
 support_material_extrusion_width = 0.37
+top_solid_infill_speed = 40
 
 # MK2 #
 [print:0.35mm FAST @0.6 nozzle]
@@ -1059,8 +1070,9 @@ solid_infill_extrusion_width = 0.68
 # XXXXXXXXXXXXXXXXXXXXXX
 
 # MK2.5 #
-[print:0.15mm 100mms Linear Advance @MK2.5]
-inherits = 0.15mm 100mms Linear Advance
+[print:0.15mm 100mms @MK2.5]
+inherits = 0.15mm 100mms
+renamed_from = "0.15mm 100mms Linear Advance @MK2.5"
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
 single_extruder_multi_material_priming = 0
 
@@ -1091,8 +1103,9 @@ support_material_interface_extruder = 5
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
 
 # MK2.5 #
-[print:0.20mm 100mms Linear Advance @MK2.5]
-inherits = 0.20mm 100mms Linear Advance
+[print:0.20mm 100mms @MK2.5]
+inherits = 0.20mm 100mms
+renamed_from = "0.20mm 100mms Linear Advance @MK2.5"
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
 single_extruder_multi_material_priming = 0
 
@@ -1190,7 +1203,9 @@ infill_speed = 50
 max_print_speed = 50
 solid_infill_speed = 40
 support_material_speed = 35
-support_material_contact_distance = 0.25
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.25
+support_material_contact_distance_bottom = 0.25
 top_solid_infill_speed = 30
 external_perimeter_extrusion_width = 1
 perimeter_extrusion_width = 1
@@ -1210,6 +1225,7 @@ perimeter_extrusion_width = 0.4
 external_perimeter_extrusion_width = 0.4
 support_material_xy_spacing = 60%
 support_material_speed = 30
+support_material_extrusion_width = 0.35
 
 [print:0.07mm ULTRADETAIL @MINI]
 inherits = *0.07mm*; *MINI*
@@ -1221,6 +1237,7 @@ small_perimeter_speed = 15
 perimeter_extrusion_width = 0.4
 external_perimeter_extrusion_width = 0.4
 support_material_xy_spacing = 60%
+support_material_extrusion_width = 0.35
 
 [print:0.10mm DETAIL @MINI]
 inherits = *0.10mm*; *MINI*
@@ -1432,7 +1449,9 @@ infill_acceleration = 1000
 infill_speed = 40
 solid_infill_speed = 40
 support_material_speed = 35
-support_material_contact_distance = 0.25
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.25
+support_material_contact_distance_bottom = 0.25
 top_solid_infill_speed = 28
 external_perimeter_extrusion_width = 1
 perimeter_extrusion_width = 1
@@ -1506,7 +1525,7 @@ max_fan_speed = 50
 min_fan_speed = 30
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
 temperature = 240
-filament_retract_length = 1.4
+filament_retract_length = 1
 filament_retract_lift = 0.2
 compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
@@ -1877,8 +1896,8 @@ min_fan_speed = 20
 max_fan_speed = 20
 min_print_speed = 15
 slowdown_below_layer_time = 15
-first_layer_temperature = 265
-temperature = 265
+first_layer_temperature = 260
+temperature = 260
 filament_type = ASA
 
 [filament:Prusament ASA]
@@ -1907,7 +1926,7 @@ compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI
 [filament:Prusament PC Blend]
 inherits = *ABS*
 filament_vendor = Prusa Polymers
-filament_cost = 60.49 
+filament_cost = 62.36 
 filament_density = 1.22
 filament_spool_weight = 201
 fan_always_on = 0
@@ -1926,44 +1945,38 @@ fan_below_layer_time = 30
 filament_type = PC
 filament_colour = #DEE0E6
 filament_max_volumetric_speed = 8
-filament_retract_length = 1
 filament_retract_lift = 0.2
 compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
 
 [filament:Prusament PC Blend @MK2]
-inherits = *ABS*
-filament_vendor = Prusa Polymers
-filament_cost = 60.49
-filament_density = 1.22
-filament_spool_weight = 201
-fan_always_on = 0
-first_layer_temperature = 275
+inherits = Prusament PC Blend
 first_layer_bed_temperature = 105
-temperature = 275
 bed_temperature = 110
-cooling = 1
-min_fan_speed = 20
-max_fan_speed = 20
-min_print_speed = 15
-bridge_fan_speed = 30
-slowdown_below_layer_time = 20
 disable_fan_first_layers = 6
-fan_below_layer_time = 30
-filament_type = PC
-filament_colour = #DEE0E6
-filament_max_volumetric_speed = 8
-filament_retract_length = 1
-filament_retract_lift = 0.2
-compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
+compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
 
-[filament:Prusament PC Blend @MK2MMU1]
-inherits = Prusament PC Blend @MK2
+[filament:Prusament PC Blend Carbon Fiber]
+inherits = Prusament PC Blend
+filament_cost = 90.73 
+filament_density = 1.16
+extrusion_multiplier = 1.04
+first_layer_temperature = 285
+temperature = 285
+disable_fan_first_layers = 4
+fan_below_layer_time = 10
+filament_colour = #BBBBBB
 filament_retract_length = nil
-filament_retract_lift = 0.2
-compatible_printers_condition = printer_model=="MK2SMM"
-start_filament_gcode = "M900 K200 ; Filament gcode LA 1.0"
+filament_retract_lift = nil
+compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_model!="MINI" and ! single_extruder_multi_material
+
+[filament:Prusament PC Blend Carbon Fiber @MK2]
+inherits = Prusament PC Blend Carbon Fiber
+first_layer_bed_temperature = 105
+bed_temperature = 110
+disable_fan_first_layers = 6
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0"
 
 [filament:Fillamentum CPE]
 inherits = *PET*
@@ -1974,8 +1987,8 @@ filament_spool_weight = 230
 filament_type = CPE
 first_layer_bed_temperature = 90
 first_layer_temperature = 275
+min_fan_speed = 30
 max_fan_speed = 50
-min_fan_speed = 50
 disable_fan_first_layers = 3
 full_fan_speed_layer = 5
 temperature = 275
@@ -2054,6 +2067,30 @@ filament_cost = 27.82
 filament_density = 1.27
 compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
 
+[filament:Extrudr PLA NX1]
+inherits = *PLA*
+filament_vendor = Extrudr
+filament_cost = 22.76
+filament_density = 1.24
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=97"
+temperature = 205
+bed_temperature = 60
+first_layer_temperature = 205
+first_layer_bed_temperature = 60
+full_fan_speed_layer = 3
+max_fan_speed = 90
+min_fan_speed = 30
+slowdown_below_layer_time = 20
+filament_spool_weight = 0
+
+[filament:Extrudr PLA NX2]
+inherits = Extrudr PLA NX1
+filament_vendor = Extrudr
+filament_cost = 23.63
+filament_density = 1.3
+filament_notes = "https://www.extrudr.com/en/products/catalogue/?material=128"
+filament_spool_weight = 0
+
 [filament:Plasty Mladec PETG]
 inherits = *PET*
 filament_vendor = Plasty Mladec
@@ -2186,7 +2223,7 @@ filament_colour = #FFF2EC
 first_layer_bed_temperature = 100
 first_layer_temperature = 270
 temperature = 270
-bridge_fan_speed = -1
+bridge_fan_speed = 0
 filament_max_volumetric_speed = 8
 
 [filament:PrimaSelect PVA+]
@@ -2284,7 +2321,7 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and no
 [filament:Prusament PC Blend @MMU2]
 inherits = *ABS MMU2*
 filament_vendor = Prusa Polymers
-filament_cost = 60.49
+filament_cost = 62.36
 filament_density = 1.22
 filament_spool_weight = 201
 fan_always_on = 0
@@ -2304,13 +2341,25 @@ filament_cooling_final_speed = 2
 filament_cooling_initial_speed = 3
 filament_cooling_moves = 1
 filament_max_volumetric_speed = 8
-filament_retract_length = 1
 filament_retract_lift = 0.2
 filament_ramming_parameters = "130 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_type = PC
 filament_colour = #DEE0E6
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.07{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K22{elsif nozzle_diameter[0]==0.8};{else}M900 K40{endif} ; Filament gcode LA 1.0"
 
+[filament:Prusament PC Blend Carbon Fiber @MMU2]
+inherits = Prusament PC Blend @MMU2
+filament_cost = 90.73
+filament_density = 1.16
+extrusion_multiplier = 1.04
+fan_below_layer_time = 10
+first_layer_temperature = 280
+temperature = 280
+disable_fan_first_layers = 4
+filament_retract_lift = nil
+filament_colour = #BBBBBB
+compatible_printers_condition = nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
+
 [filament:Prusa ABS @MMU2]
 inherits = *ABS MMU2*
 filament_vendor = Made for Prusa
@@ -2474,8 +2523,9 @@ filament_unload_time = 12
 filament_unloading_speed = 20
 filament_unloading_speed_start = 120
 filament_loading_speed_start = 19
-filament_retract_length = 1.4
+filament_retract_length = 1
 filament_retract_lift = 0.2
+filament_max_volumetric_speed = 7
 
 [filament:*PET MMU2 06*]
 inherits = *PET MMU2*
@@ -3020,8 +3070,8 @@ filament_spool_weight = 230
 filament_type = CPE
 first_layer_bed_temperature = 90
 first_layer_temperature = 275
+min_fan_speed = 30
 max_fan_speed = 50
-min_fan_speed = 50
 disable_fan_first_layers = 3
 full_fan_speed_layer = 5
 temperature = 275
@@ -3304,6 +3354,12 @@ filament_colour = #804040
 filament_max_volumetric_speed = 6
 first_layer_temperature = 260
 temperature = 260
+fan_always_on = 0
+cooling = 1
+min_fan_speed = 15
+max_fan_speed = 15
+disable_fan_first_layers = 4
+fan_below_layer_time = 30
 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI"
 
 [filament:Kimya ABS Kevlar @MINI]
@@ -3549,7 +3605,7 @@ min_fan_speed = 50
 filament_max_volumetric_speed = 1.2
 compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MINI"
 disable_fan_first_layers = 4
-extrusion_multiplier = 1.2
+extrusion_multiplier = 1.15
 start_filament_gcode = "M900 K0 ; Filament gcode"
 
 [filament:Fillamentum CPE @MINI]
@@ -3563,17 +3619,28 @@ filament_density = 1.25
 filament_spool_weight = 230
 disable_fan_first_layers = 3
 full_fan_speed_layer = 5
+min_fan_speed = 30
 
 [filament:ColorFabb nGen @MINI]
 inherits = ColorFabb nGen; *PETMINI*
 filament_cost = 52.46
 filament_density = 1.2
 filament_spool_weight = 236
+filament_type = NGEN
+first_layer_temperature = 240
+bridge_fan_speed = 40
+fan_always_on = 0
+fan_below_layer_time = 10
+max_fan_speed = 35
+min_fan_speed = 20
 
 [filament:E3D PC-ABS @MINI]
 inherits = E3D PC-ABS; *ABSMINI*
 filament_density = 1.05
 filament_cost = 28.80
+filament_type = PC
+first_layer_temperature = 270
+temperature = 270
 
 [filament:Fillamentum ABS @MINI]
 inherits = Fillamentum ABS; *ABSMINI*
@@ -3587,12 +3654,14 @@ max_fan_speed = 15
 disable_fan_first_layers = 4
 fan_below_layer_time = 30
 bridge_fan_speed = 25
+first_layer_temperature = 240
+temperature = 240
 
 [filament:Fillamentum ASA @MINI]
 inherits = Fillamentum ASA; *ABSMINI*
-first_layer_temperature = 255
+first_layer_temperature = 260
 first_layer_bed_temperature = 100
-temperature = 255
+temperature = 260
 bed_temperature = 100
 fan_always_on = 1
 cooling = 1
@@ -3616,14 +3685,17 @@ filament_colour = #FFF2EC
 first_layer_bed_temperature = 100
 first_layer_temperature = 270
 temperature = 270
-bridge_fan_speed = -1
+bridge_fan_speed = 0
 filament_cost = 77.3
 filament_density = 1.20
+filament_retract_length = nil
+filament_retract_before_travel = nil
+filament_wipe = nil
 
 [filament:Prusament PC Blend @MINI]
 inherits = *ABSMINI*
 filament_vendor = Prusa Polymers
-filament_cost = 60.49
+filament_cost = 62.36
 filament_density = 1.22
 filament_spool_weight = 201
 fan_always_on = 0
@@ -3649,6 +3721,19 @@ filament_retract_before_travel = nil
 filament_wipe = nil
 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8
 
+[filament:Prusament PC Blend Carbon Fiber @MINI]
+inherits = Prusament PC Blend @MINI
+filament_cost = 90.73
+filament_density = 1.16
+extrusion_multiplier = 1.04
+first_layer_temperature = 280
+temperature = 280
+disable_fan_first_layers = 4
+fan_below_layer_time = 10
+filament_max_volumetric_speed = 6.5
+filament_colour = #BBBBBB
+compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]>=0.4 and nozzle_diameter[0]!=0.8
+
 [filament:Prusa ABS @MINI]
 inherits = *ABSMINI*
 filament_vendor = Made for Prusa
@@ -3697,7 +3782,7 @@ filament_spool_weight = 236
 first_layer_bed_temperature = 100
 first_layer_temperature = 270
 max_fan_speed = 20
-min_fan_speed = 10
+min_fan_speed = 15
 temperature = 270
 
 [filament:ColorFabb XT @MINI]
@@ -3860,6 +3945,18 @@ filament_max_volumetric_speed = 13
 filament_retract_lift = 0.25
 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
 
+[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle]
+inherits = Prusament PC Blend Carbon Fiber
+filament_max_volumetric_speed = 13
+filament_retract_lift = 0.25
+compatible_printers_condition = printer_notes!~/.*PRINTER_MODEL_MK(2|2.5).*/ and nozzle_diameter[0]==0.8 and printer_model!="MINI" and ! single_extruder_multi_material
+
+[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle MK2]
+inherits = Prusament PC Blend Carbon Fiber @MK2
+filament_max_volumetric_speed = 13
+filament_retract_lift = 0.25
+compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model!="MK2SMM" and printer_notes=~/.*PRINTER_MODEL_MK(2|2.5).*/ and ! (printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and single_extruder_multi_material)
+
 [filament:Prusament PVB @0.8 nozzle]
 inherits = Prusament PVB
 first_layer_temperature = 225
@@ -4007,8 +4104,15 @@ filament_retract_lift = 0.25
 slowdown_below_layer_time = 20
 compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"
 
+[filament:Prusament PC Blend Carbon Fiber @0.8 nozzle MINI]
+inherits = Prusament PC Blend Carbon Fiber @MINI
+filament_max_volumetric_speed = 10
+filament_retract_lift = 0.25
+slowdown_below_layer_time = 20
+compatible_printers_condition = nozzle_diameter[0]==0.8 and printer_model=="MINI"
+
 [sla_print:*common*]
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
+compatible_printers_condition = printer_model=="SL1"
 layer_height = 0.05
 output_filename_format = [input_filename_base].sl1
 pad_edge_radius = 0.5
@@ -4035,6 +4139,16 @@ support_pillar_widening_factor = 0
 supports_enable = 1
 support_small_pillar_diameter_percent = 60%
 
+[sla_print:*SL1S*]
+inherits = *common*
+support_head_front_diameter = 0.5
+support_head_penetration = 0.5
+support_pillar_diameter = 1
+output_filename_format = [input_filename_base].sl1s
+compatible_printers_condition = printer_model=="SL1S"
+
+# SL1 #
+
 [sla_print:0.025 UltraDetail]
 inherits = *common*
 layer_height = 0.025
@@ -4055,10 +4169,25 @@ support_head_front_diameter = 0.5
 support_head_penetration = 0.5
 support_pillar_diameter = 1.3
 
+# SL1S #
+
+[sla_print:0.025 UltraDetail @SL1S]
+inherits = *SL1S*
+layer_height = 0.025
+support_head_width = 3
+
+[sla_print:0.05 Normal @SL1S]
+inherits = *SL1S*
+layer_height = 0.05
+
+[sla_print:0.1 Fast @SL1S]
+inherits = *SL1S*
+layer_height = 0.1
+
 ########### Materials
 
-[sla_material:*common 0.05*]
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
+[sla_material:*common*]
+compatible_printers_condition = printer_model=="SL1"
 compatible_prints_condition = layer_height == 0.05
 exposure_time = 12
 initial_exposure_time = 45
@@ -4067,26 +4196,52 @@ material_correction = 1,1,1
 material_notes = 
 
 [sla_material:*common 0.025*]
-inherits = *common 0.05*
+inherits = *common*
 compatible_prints_condition = layer_height == 0.025
 exposure_time = 10
 initial_exposure_time = 35
 initial_layer_height = 0.025
 
 [sla_material:*common 0.035*]
-inherits = *common 0.05*
+inherits = *common*
 compatible_prints_condition = layer_height == 0.035
 exposure_time = 13
 initial_exposure_time = 40
 initial_layer_height = 0.035
 
+[sla_material:*common 0.05*]
+inherits = *common*
+
 [sla_material:*common 0.1*]
-inherits = *common 0.05*
+inherits = *common*
 compatible_prints_condition = layer_height == 0.1
 exposure_time = 20
 initial_exposure_time = 45
 initial_layer_height = 0.1
 
+[sla_material:*0.025_sl1s*]
+inherits = *common*
+compatible_prints_condition = layer_height == 0.025
+compatible_printers_condition = printer_model=="SL1S"
+exposure_time = 1.3
+initial_exposure_time = 25
+initial_layer_height = 0.025
+
+[sla_material:*0.05_sl1s*]
+inherits = *common*
+compatible_printers_condition = printer_model=="SL1S"
+exposure_time = 1.7
+initial_exposure_time = 25
+
+[sla_material:*0.1_sl1s*]
+inherits = *common*
+compatible_prints_condition = layer_height == 0.1
+compatible_printers_condition = printer_model=="SL1S"
+exposure_time = 2.6
+initial_exposure_time = 25
+initial_layer_height = 0.1
+
+
 ########### Materials 0.025
 
 [sla_material:3DM-ABS @0.025]
@@ -4103,14 +4258,14 @@ initial_exposure_time = 30
 material_type = Tough
 material_vendor = 3DM
 
-[sla_material:3DM-TOUGH Clear 0.025]
+[sla_material:3DM-TOUGH Clear @0.025]
 inherits = *common 0.025*
 exposure_time = 9
 initial_exposure_time = 30
 material_type = Tough
 material_vendor = 3DM
 
-[sla_material:3DM-HR Red Wine 0.025]
+[sla_material:3DM-HR Red Wine @0.025]
 inherits = *common 0.025*
 exposure_time = 14
 initial_exposure_time = 35
@@ -4743,7 +4898,7 @@ initial_exposure_time = 30
 material_type = Tough
 material_vendor = 3DM
 
-[sla_material:3DM-TOUGH Clear 0.05]
+[sla_material:3DM-TOUGH Clear @0.05]
 inherits = *common 0.05*
 exposure_time = 15
 initial_exposure_time = 30
@@ -5287,10 +5442,354 @@ initial_exposure_time = 35
 material_type = Tough
 material_vendor = Made for Prusa
 
+## SL1S materials ##
+
+## 0.025 SL1S
+
+[sla_material:Prusa Orange Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White ABS like @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Azure Blue Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Black Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Cyan Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Magenta Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Maroon Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Pink Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey Tough @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Blue Flexible @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey High Tenacity @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:3DM-ABS Orange @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:3DM-TOUGH Clear @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:Peopoly Deft White @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
+[sla_material:Peopoly Neo Clear @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
+## 0.05 SL1S
+
+[sla_material:Prusa Orange Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White ABS like @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Azure Blue Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Black Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Cyan Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Magenta Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Maroon Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Pink Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Blue Flexible @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey Tough @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.4
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey High Tenacity @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:3DM-ABS Orange @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:3DM-TOUGH Clear @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:Peopoly Deft White @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
+[sla_material:Peopoly Neo Clear @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
+## 0.1 SL1S
+
+[sla_material:Prusa Orange Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White ABS like @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Azure Blue Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Black Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Cyan Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Magenta Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Maroon Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa White Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Pink Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Blue Flexible @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey Tough @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:Prusa Grey High Tenacity @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Made for Prusa
+
+[sla_material:3DM-ABS Orange @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:3DM-TOUGH Clear @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = 3DM
+
+[sla_material:Peopoly Deft White @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
+[sla_material:Peopoly Neo Clear @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Peopoly
+
 [printer:*common*]
 printer_technology = FFF
 bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n
 between_objects_gcode = 
 deretract_speed = 0
 end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors
@@ -5458,21 +5957,21 @@ inherits = Original Prusa i3 MK2S
 printer_model = MK2.5
 remaining_times = 1
 machine_max_jerk_e = 4.5
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
 
 [printer:Original Prusa i3 MK2.5 0.25 nozzle]
 inherits = Original Prusa i3 MK2S 0.25 nozzle
 printer_model = MK2.5
 remaining_times = 1
 machine_max_jerk_e = 4.5
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
 
 [printer:Original Prusa i3 MK2.5 0.6 nozzle]
 inherits = Original Prusa i3 MK2S 0.6 nozzle
 printer_model = MK2.5
 remaining_times = 1
 machine_max_jerk_e = 4.5
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
 
 [printer:Original Prusa i3 MK2.5 0.8 nozzle]
 inherits = Original Prusa i3 MK2S 0.6 nozzle
@@ -5484,7 +5983,7 @@ min_layer_height = 0.2
 retract_length = 1
 remaining_times = 1
 machine_max_jerk_e = 4.5
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
 
@@ -5515,7 +6014,7 @@ machine_min_travel_rate = 0
 default_print_profile = 0.15mm OPTIMAL @MK2.5
 default_filament_profile = Prusament PLA
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors
 
 [printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle]
@@ -5560,24 +6059,24 @@ single_extruder_multi_material = 1
 # (for example the retract values) are duplicaed from the first value, so they do not need 
 # to be defined explicitely.
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
-extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
+extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
 end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n
 
 [printer:Original Prusa i3 MK2.5S]
 inherits = Original Prusa i3 MK2.5
 printer_model = MK2.5S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83  ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83  ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
 
 [printer:Original Prusa i3 MK2.5S 0.25 nozzle]
 inherits = Original Prusa i3 MK2.5 0.25 nozzle
 printer_model = MK2.5S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
 
 [printer:Original Prusa i3 MK2.5S 0.6 nozzle]
 inherits = Original Prusa i3 MK2.5 0.6 nozzle
 printer_model = MK2.5S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
 
 [printer:Original Prusa i3 MK2.5S 0.8 nozzle]
 inherits = Original Prusa i3 MK2.5 0.8 nozzle
@@ -5610,7 +6109,7 @@ machine_min_travel_rate = 0
 default_print_profile = 0.15mm OPTIMAL @MK2.5
 default_filament_profile = Prusament PLA
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors
 
 [printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle]
@@ -5621,7 +6120,7 @@ min_layer_height = 0.2
 nozzle_diameter = 0.8
 printer_variant = 0.8
 retract_length = 1
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
 
@@ -5643,7 +6142,7 @@ nozzle_diameter = 0.25
 printer_variant = 0.25
 retract_lift = 0.15
 default_print_profile = 0.10mm DETAIL 0.25 nozzle
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n
 
 [printer:Original Prusa i3 MK2.5S MMU2S]
 inherits = Original Prusa i3 MK2.5; *mm2s*
@@ -5675,8 +6174,8 @@ single_extruder_multi_material = 1
 # (for example the retract values) are duplicaed from the first value, so they do not need 
 # to be defined explicitely.
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
-extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
+extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
 end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n
 
 [printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle]
@@ -5705,7 +6204,7 @@ default_print_profile = 0.20mm NORMAL @0.6 nozzle
 ## printer_variant = 0.8
 ## retract_length = 1
 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle
-## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
+## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
 
 ## [printer:Original Prusa i3 MK2.5 MMU2 0.8 nozzle]
 ## inherits = Original Prusa i3 MK2.5 MMU2
@@ -5715,7 +6214,7 @@ default_print_profile = 0.20mm NORMAL @0.6 nozzle
 ## printer_variant = 0.8
 ## retract_length = 1
 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle
-## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
+## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
 
 # XXXXXXXXXXXXXXXXX
 # XXX--- MK3 ---XXX
@@ -5745,7 +6244,7 @@ remaining_times = 1
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
 retract_lift_below = 209
 max_print_height = 210
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
 printer_model = MK3
 default_print_profile = 0.15mm QUALITY @MK3
 
@@ -5756,7 +6255,7 @@ max_layer_height = 0.15
 min_layer_height = 0.05
 printer_variant = 0.25
 retract_lift = 0.15
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
 
 [printer:Original Prusa i3 MK3 0.6 nozzle]
@@ -5765,7 +6264,7 @@ nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 
 [printer:Original Prusa i3 MK3 0.8 nozzle]
@@ -5775,7 +6274,7 @@ max_layer_height = 0.6
 min_layer_height = 0.2
 printer_variant = 0.8
 retract_length = 1
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
 
@@ -5783,13 +6282,13 @@ default_filament_profile = Prusament PLA @0.8 nozzle
 inherits = Original Prusa i3 MK3
 renamed_from = "Original Prusa i3 MK3S"
 printer_model = MK3S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
 
 [printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle]
 inherits = Original Prusa i3 MK3 0.25 nozzle
 renamed_from = "Original Prusa i3 MK3S 0.25 nozzle"
 printer_model = MK3S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 
 [printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle]
 inherits = Original Prusa i3 MK3 0.6 nozzle
@@ -5806,7 +6305,7 @@ single_extruder_multi_material = 1
 cooling_tube_length = 10
 cooling_tube_retraction = 30
 parking_pos_retraction = 85
-retract_length_toolchange = 3
+retract_length_toolchange = 2
 extra_loading_move = -13
 printer_model = MK3MMU2
 default_print_profile = 0.15mm QUALITY @MK3
@@ -5818,7 +6317,7 @@ single_extruder_multi_material = 1
 cooling_tube_length = 20
 cooling_tube_retraction = 40
 parking_pos_retraction = 85
-retract_length_toolchange = 3
+retract_length_toolchange = 2
 extra_loading_move = -25
 printer_model = MK3SMMU2S
 default_print_profile = 0.15mm QUALITY @MK3
@@ -5828,7 +6327,7 @@ default_filament_profile = Prusament PLA @MMU2
 inherits = *mm2*
 single_extruder_multi_material = 0
 default_filament_profile = Prusament PLA
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
 
 [printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle]
@@ -5838,7 +6337,7 @@ nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 
 [printer:Original Prusa i3 MK3 MMU2 Single 0.8 nozzle]
@@ -5849,7 +6348,7 @@ max_layer_height = 0.6
 min_layer_height = 0.2
 printer_variant = 0.8
 retract_length = 1
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
 
@@ -5861,7 +6360,7 @@ max_layer_height = 0.15
 min_layer_height = 0.05
 printer_variant = 0.25
 retract_lift = 0.15
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
 
 [printer:Original Prusa i3 MK3 MMU2]
@@ -5871,8 +6370,8 @@ inherits = *mm2*
 # to be defined explicitely.
 machine_max_acceleration_e = 8000,8000
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
-extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
+extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
 end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n
 
 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single]
@@ -5880,7 +6379,7 @@ inherits = *mm2s*
 renamed_from = "Original Prusa i3 MK3S MMU2S Single"
 single_extruder_multi_material = 0
 default_filament_profile = Prusament PLA
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
 
 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle]
@@ -5891,7 +6390,7 @@ nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 
 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle]
@@ -5902,7 +6401,7 @@ max_layer_height = 0.6
 min_layer_height = 0.2
 printer_variant = 0.8
 retract_length = 1
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
 
@@ -5915,7 +6414,7 @@ max_layer_height = 0.15
 min_layer_height = 0.05
 printer_variant = 0.25
 retract_lift = 0.15
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3
 
 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S]
@@ -5923,8 +6422,8 @@ inherits = *mm2s*
 renamed_from = "Original Prusa i3 MK3S MMU2S"
 machine_max_acceleration_e = 8000,8000
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
-extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
+extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
 end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n
 
 ## 0.6mm nozzle MMU2/S printer profiles
@@ -5936,7 +6435,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 
 [printer:Original Prusa i3 MK3 MMU2 0.6 nozzle]
@@ -5945,7 +6444,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 
 ## 0.8mm nozzle MMU2/S printer profiles
@@ -5958,7 +6457,7 @@ default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 ## max_layer_height = 0.6
 ## min_layer_height = 0.2
 ## printer_variant = 0.8
-## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle
 
 ## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle]
@@ -5967,7 +6466,7 @@ default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3
 ## max_layer_height = 0.6
 ## min_layer_height = 0.2
 ## printer_variant = 0.8
-## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.10.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle
 
 ## MINI
@@ -6080,6 +6579,39 @@ thumbnails_color = #eb8037
 thumbnails_with_bed = 1
 thumbnails_custom_color = 1
 
+[printer:Original Prusa SL1S SPEED]
+printer_technology = SLA
+printer_model = SL1S
+printer_variant = default
+default_sla_material_profile = Prusa Orange Tough @0.05 SL1S
+default_sla_print_profile = 0.05 Normal @SL1S
+thumbnails = 400x400,800x480
+bed_shape = 0.5x0.5,127.5x0.5,127.5x80.5,0.5x80.5
+display_height = 81
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = portrait
+display_pixels_x = 2560
+display_pixels_y = 1620
+display_width = 128
+first_layer_size_compensation = -0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 2.5
+slow_tilt_time = 5
+gamma_correction = 1
+max_print_height = 150
+min_exposure_time = 1
+max_exposure_time = 120
+min_initial_exposure_time = 1
+max_initial_exposure_time = 300
+printer_correction = 1,1,1
+relative_correction = 1,1
+area_fill = 45
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1S\n
+thumbnails_color = #eb8037
+thumbnails_with_bed = 1
+thumbnails_custom_color = 1
+
 # The obsolete presets will be removed when upgrading from the legacy configuration structure (up to Slic3r 1.39.2) to 1.40.0 and newer.
 [obsolete_presets]
 print="0.05mm DETAIL 0.25 nozzle";"0.05mm DETAIL MK3";"0.05mm DETAIL";"0.20mm NORMAL MK3";"0.35mm FAST MK3";"print:0.15mm OPTIMAL MK3 MMU2";"print:0.20mm FAST MK3 MMU2"
diff --git a/PrusaResearch/MK3S_thumbnail.png b/PrusaResearch/MK3S_thumbnail.png
index 5fa1a66..8a859b8 100644
--- a/PrusaResearch/MK3S_thumbnail.png
+++ b/PrusaResearch/MK3S_thumbnail.png
diff --git a/PrusaResearch/SL1S_thumbnail.png b/PrusaResearch/SL1S_thumbnail.png
new file mode 100644
index 0000000..8f02aef
--- /dev/null
+++ b/PrusaResearch/SL1S_thumbnail.png
diff --git a/PrusaResearch/SL1_thumbnail.png b/PrusaResearch/SL1_thumbnail.png
index b4425a7..984aed7 100644
--- a/PrusaResearch/SL1_thumbnail.png
+++ b/PrusaResearch/SL1_thumbnail.png
diff --git a/PrusaResearch/sl1s.svg b/PrusaResearch/sl1s.svg
new file mode 100644
index 0000000..c1e65f8
--- /dev/null
+++ b/PrusaResearch/sl1s.svg
@@ -0,0 +1,54 @@
+<svg xmlns="http://www.w3.org/2000/svg" width="127mm" height="80mm" viewBox="0 0 360 226.8">
+  <rect width="360" height="226.77" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 1.41732283464567px"/>
+  <path d="M210.4,162.2h6.2a5.3,5.3,0,0,1,2.5.4,3.6,3.6,0,0,1,1.4,1.1,2.7,2.7,0,0,1,.7,1.4,7.7,7.7,0,0,1,.2,1.5,7.8,7.8,0,0,1-.2,1.4,2.7,2.7,0,0,1-.7,1.4,4.9,4.9,0,0,1-1.4,1.1,6.9,6.9,0,0,1-2.5.4h-3.7v5.4h-2.5Zm2.5,6.6h4.4l.8-.4.6-.7a3.1,3.1,0,0,0,0-2.2,1.8,1.8,0,0,0-.5-.7l-.8-.4h-4.6Z" style="fill: #fff"/>
+  <path d="M223.6,162.2h6.7a4.7,4.7,0,0,1,3.4,1,3.6,3.6,0,0,1,1.2,2.8,4.5,4.5,0,0,1-.3,1.6,4.1,4.1,0,0,1-.7,1.1,2.1,2.1,0,0,1-.8.6l-.6.3h0l.7.2a1.2,1.2,0,0,1,.7.5,1.9,1.9,0,0,1,.5.9,3,3,0,0,1,.2,1.3,17.9,17.9,0,0,0,.2,2.3,3.5,3.5,0,0,0,.6,1.4h-2.7a2.9,2.9,0,0,1-.3-1v-1.1a9.7,9.7,0,0,0-.1-1.7,4.9,4.9,0,0,0-.4-1.1l-.9-.7-1.4-.2H226v5.8h-2.4Zm2.4,6.4h4.1a3,3,0,0,0,1.8-.6,2.5,2.5,0,0,0,.6-1.7,4.3,4.3,0,0,0-.2-1.1,1.8,1.8,0,0,0-.5-.7l-.8-.3h-5Z" style="fill: #fff"/>
+  <path d="M237.3,162.2h2.5v8.2c0,.4.1.9.1,1.4a2.8,2.8,0,0,0,.4,1.3,2.4,2.4,0,0,0,1,1,3.9,3.9,0,0,0,1.8.4,4.1,4.1,0,0,0,1.9-.4,2.4,2.4,0,0,0,1-1,2.8,2.8,0,0,0,.4-1.3c0-.5.1-1,.1-1.4v-8.2h2.4v9a4.5,4.5,0,0,1-.4,2.3,3,3,0,0,1-1.2,1.7,4.2,4.2,0,0,1-1.8,1.1,9.4,9.4,0,0,1-4.7,0,7.2,7.2,0,0,1-1.9-1.1,5.6,5.6,0,0,1-1.1-1.7,5.9,5.9,0,0,1-.4-2.3Z" style="fill: #fff"/>
+  <path d="M253.4,171.6a2,2,0,0,0,.2,1.3,3.9,3.9,0,0,0,.8,1l1.1.5,1.4.2,1.4-.2.9-.5a1.8,1.8,0,0,0,.5-.7,1.9,1.9,0,0,0,.2-.8,1.5,1.5,0,0,0-.4-1.1,1.6,1.6,0,0,0-.8-.6l-1.7-.5-2.5-.7-1.5-.6a3.9,3.9,0,0,1-1-.8,4.7,4.7,0,0,1-.5-1,4.9,4.9,0,0,1-.1-1.2,3.9,3.9,0,0,1,.4-1.8,3.7,3.7,0,0,1,1.2-1.3l1.7-.8,1.9-.2a6.4,6.4,0,0,1,2,.3,9.8,9.8,0,0,1,1.8.8,4.4,4.4,0,0,1,1.6,3.4h-2.5a2.2,2.2,0,0,0-.9-1.9,4.2,4.2,0,0,0-2.1-.6h-.9l-.9.3-.6.5a1.8,1.8,0,0,0,.2,2.1,3.4,3.4,0,0,0,1.2.6l.6.2,1.3.3,1.3.4.9.2,1.2.6.9.9a3.1,3.1,0,0,1,.5,1,4.5,4.5,0,0,1,.1,1.1,3.9,3.9,0,0,1-.4,2.1,5.3,5.3,0,0,1-1.3,1.3,4.8,4.8,0,0,1-1.8.8l-2.1.3a8.3,8.3,0,0,1-2.2-.3,6.6,6.6,0,0,1-1.9-.9,6.1,6.1,0,0,1-1.2-1.6,5.9,5.9,0,0,1-.5-2.2Z" style="fill: #fff"/>
+  <path d="M268.3,162.2h2.6l5.5,14.1h-2.7l-1.3-3.8h-5.6l-1.4,3.8h-2.5Zm-.9,8.4h4.3l-2.1-6h0Z" style="fill: #fff"/>
+  <path d="M284.8,171.6a3.1,3.1,0,0,0,.3,1.3,2.5,2.5,0,0,0,.8,1l1.1.5,1.4.2,1.4-.2.9-.5a1.8,1.8,0,0,0,.5-.7,1.9,1.9,0,0,0,.2-.8,2,2,0,0,0-.3-1.1,2.1,2.1,0,0,0-.8-.6l-1.8-.5-2.5-.7-1.5-.6a3.4,3.4,0,0,1-.9-.8,2.4,2.4,0,0,1-.5-1,5,5,0,0,1-.2-1.2,4.1,4.1,0,0,1,.5-1.8,4.7,4.7,0,0,1,1.1-1.3l1.7-.8,1.9-.2,2.1.3a4.4,4.4,0,0,1,2.9,2.2,4.8,4.8,0,0,1,.4,2H291a2.2,2.2,0,0,0-.9-1.9,3.9,3.9,0,0,0-2.1-.6h-.9l-.8.3a1.3,1.3,0,0,0-.7.6,2,2,0,0,0-.2.9,1.6,1.6,0,0,0,.5,1.1,2.3,2.3,0,0,0,1.2.6l.6.2,1.2.3,1.3.3.9.3a2.3,2.3,0,0,1,1.2.6,2,2,0,0,1,.9.9,3.1,3.1,0,0,1,.5,1,3.6,3.6,0,0,1,.2,1.1,4.6,4.6,0,0,1-.5,2,3.5,3.5,0,0,1-1.3,1.4,4.9,4.9,0,0,1-1.8.8l-2,.2a7.8,7.8,0,0,1-2.2-.3,4.7,4.7,0,0,1-3.2-2.5,5.1,5.1,0,0,1-.5-2.2Z" style="fill: #fff"/>
+  <path d="M296,162.2h2.5v11.9h7.1v2.2H296Z" style="fill: #fff"/>
+  <path d="M306.9,164.7h1.4l1.2-.4.9-.7a2.2,2.2,0,0,0,.5-1.1h1.8v13.9h-2.4v-9.8h-3.4Z" style="fill: #fff"/>
+  <path d="M214.8,149.6a4.4,4.4,0,0,1,3.5,1.5,5.6,5.6,0,0,1,.9,1.7,6.4,6.4,0,0,1,.3,2,7.5,7.5,0,0,1-.3,2,5.1,5.1,0,0,1-.9,1.6,4.8,4.8,0,0,1-1.5,1.1,5.3,5.3,0,0,1-2,.5,4.6,4.6,0,0,1-2-.5,3.3,3.3,0,0,1-1.5-1.1,5.4,5.4,0,0,1-1-1.6,7.5,7.5,0,0,1-.3-2,6.4,6.4,0,0,1,.3-2,5.9,5.9,0,0,1,1-1.7,4.1,4.1,0,0,1,3.5-1.5Zm0,1.4a3.2,3.2,0,0,0-1.4.3,2,2,0,0,0-.9.9,2.3,2.3,0,0,0-.6,1.2,6.1,6.1,0,0,0-.1,1.4,7.1,7.1,0,0,0,.1,1.4,3.4,3.4,0,0,0,.6,1.2,2.4,2.4,0,0,0,.9.8,2.2,2.2,0,0,0,1.4.3,2.1,2.1,0,0,0,1.3-.3,3.9,3.9,0,0,0,1-.8,6.1,6.1,0,0,0,.5-1.2,7.8,7.8,0,0,0,.2-1.4,5.9,5.9,0,0,0-.2-1.4,3.3,3.3,0,0,0-.5-1.2,2.8,2.8,0,0,0-1-.9A3.1,3.1,0,0,0,214.8,151Z" style="fill: #fff"/>
+  <path d="M221.1,149.8h4.7a3.7,3.7,0,0,1,2.5.7,2.2,2.2,0,0,1,.8,2,4.3,4.3,0,0,1-.2,1.1,3.5,3.5,0,0,1-.5.8l-.5.4h-.4l.5.2.4.3a1.6,1.6,0,0,1,.4.7,1.4,1.4,0,0,1,.1.9,7.8,7.8,0,0,0,.2,1.6,1.8,1.8,0,0,0,.4,1h-1.9a1.4,1.4,0,0,1-.2-.7v-.7a4.9,4.9,0,0,0-.1-1.2,1.1,1.1,0,0,0-.3-.8,1,1,0,0,0-.6-.5h-3.6v4h-1.7Zm1.7,4.5h2.9a1.7,1.7,0,0,0,1.2-.4,1.5,1.5,0,0,0,.5-1.2,2.4,2.4,0,0,0-.2-.8c0-.2-.2-.3-.3-.5l-.6-.2h-3.5Z" style="fill: #fff"/>
+  <path d="M230.9,149.8h1.8v9.9h-1.8Z" style="fill: #fff"/>
+  <path d="M243.4,159.7h-1.1l-.2-1.1-1.4,1.1a4.5,4.5,0,0,1-1.6.3,4.5,4.5,0,0,1-2-.4,4.7,4.7,0,0,1-2.5-2.8,6.9,6.9,0,0,1-.3-2,6.4,6.4,0,0,1,.3-2,4.7,4.7,0,0,1,2.5-2.8,4.5,4.5,0,0,1,2-.4l1.5.2,1.3.7a2.2,2.2,0,0,1,.9,1,3,3,0,0,1,.5,1.5h-1.7a1.6,1.6,0,0,0-.3-.9l-.5-.6-.8-.4h-.9a3.2,3.2,0,0,0-1.4.3,2,2,0,0,0-.9.9,3.4,3.4,0,0,0-.6,1.2,9.9,9.9,0,0,0,0,2.8,3.4,3.4,0,0,0,.6,1.2,2,2,0,0,0,.9.9,3.2,3.2,0,0,0,1.4.3l1.2-.2.8-.5a4.7,4.7,0,0,0,.6-.9,4.1,4.1,0,0,0,.1-1.1h-2.6v-1.4h4.2Z" style="fill: #fff"/>
+  <path d="M245.3,149.8H247v9.9h-1.7Z" style="fill: #fff"/>
+  <path d="M249.1,149.8H251l4.4,7.3h0v-7.3h1.7v9.9h-1.9l-4.4-7.3h0v7.3h-1.7Z" style="fill: #fff"/>
+  <path d="M261.8,149.8h1.9l3.8,9.9h-1.9l-.9-2.6h-4l-.9,2.6H258Zm-.6,6h3.1l-1.5-4.3h0Z" style="fill: #fff"/>
+  <path d="M268.4,149.8h1.8v8.4h5v1.5h-6.8Z" style="fill: #fff"/>
+  <path d="M317.2,171.5a2.9,2.9,0,0,0,.3,1.4,3.6,3.6,0,0,0,.7,1l1.2.5,1.4.2,1.4-.2a1.9,1.9,0,0,0,.9-.5,1.8,1.8,0,0,0,.5-.7,1.9,1.9,0,0,0,.2-.8,1.6,1.6,0,0,0-.4-1.2l-.8-.5-1.7-.5-2.5-.7a5.2,5.2,0,0,1-1.5-.6,4.5,4.5,0,0,1-1-.9,3.1,3.1,0,0,1-.5-1,3.7,3.7,0,0,1-.1-1.1,3.4,3.4,0,0,1,.4-1.8,3,3,0,0,1,1.2-1.3,4.8,4.8,0,0,1,1.6-.8,6.5,6.5,0,0,1,1.9-.2l2.1.2a4.6,4.6,0,0,1,1.7.9,5.3,5.3,0,0,1,1.2,1.4,4.2,4.2,0,0,1,.5,2h-2.5a2.6,2.6,0,0,0-1-2,4.1,4.1,0,0,0-2.1-.5h-.9a1.3,1.3,0,0,0-.8.3,1.5,1.5,0,0,0-.6.5,1.6,1.6,0,0,0-.3.9,1.7,1.7,0,0,0,.5,1.2,3.5,3.5,0,0,0,1.2.7h.6l1.3.3,1.3.4.9.2,1.2.6a7.6,7.6,0,0,1,.9.9l.5,1a5.2,5.2,0,0,1,.2,1.1,4.6,4.6,0,0,1-.5,2.1,8.6,8.6,0,0,1-1.3,1.4,4.8,4.8,0,0,1-1.8.7l-2.1.3a9.1,9.1,0,0,1-2.3-.3,4.8,4.8,0,0,1-3.1-2.5,5.2,5.2,0,0,1-.5-2.3Z" style="fill: #fff"/>
+  <g>
+    <path d="M211,186.2a3.7,3.7,0,0,0,.2,1.2,2.3,2.3,0,0,0,.7.7,1.9,1.9,0,0,0,.9.4h1.9a1.1,1.1,0,0,0,.8-.3.9.9,0,0,0,.6-.6,1.1,1.1,0,0,0,.3-.8,1.4,1.4,0,0,0-.2-.7l-.5-.4a.9.9,0,0,0-.6-.3l-.6-.2-2-.5-.8-.3-.6-.4a1.5,1.5,0,0,1-.5-.6,2.2,2.2,0,0,1-.1-.9,2.5,2.5,0,0,1,.1-.8,1.8,1.8,0,0,1,.5-.8,2.2,2.2,0,0,1,.9-.7l1.6-.2h1.2a3.9,3.9,0,0,1,1.1.6,1.6,1.6,0,0,1,.7.9,2.1,2.1,0,0,1,.3,1.2H216a2,2,0,0,0-.2-.9,1.8,1.8,0,0,0-.5-.7l-.8-.4h-1.8l-.7.3a1,1,0,0,0-.5.6,1.9,1.9,0,0,0-.2.8,4.3,4.3,0,0,0,.1.5l.3.4.5.3.5.2,2.2.5.9.3a1.8,1.8,0,0,1,.7.5l.5.6a1.6,1.6,0,0,1,.2,1v.4c0,.2-.1.3-.2.5s-.2.4-.3.6l-.6.5-1,.4-1.3.2-1.5-.2a2.3,2.3,0,0,1-1.2-.6,2.6,2.6,0,0,1-.7-1,2.1,2.1,0,0,1-.2-1.4Z" style="fill: #fff"/>
+    <path d="M218.6,180.2h5.1l.8.5a2.8,2.8,0,0,1,.6.9,3,3,0,0,1,.2,1,3.6,3.6,0,0,1-.2,1.1,2.4,2.4,0,0,1-.6.8,1.4,1.4,0,0,1-.8.5,2,2,0,0,1-1.1.2h-3.2v3.9h-.8Zm.8,4.4h3a2,2,0,0,0,1.4-.5,1.6,1.6,0,0,0,.6-1.4,1.8,1.8,0,0,0-.6-1.4,2,2,0,0,0-1.4-.4h-3Z" style="fill: #fff"/>
+    <path d="M226.5,180.2h6.3v.7h-5.4v3.3h5v.7h-5v3.5h5.4v.8h-6.3Z" style="fill: #fff"/>
+    <path d="M234,180.2h6.2v.7h-5.3v3.3h5v.7h-5v3.5h5.4v.8H234Z" style="fill: #fff"/>
+    <path d="M241.5,180.2h3.1a4.2,4.2,0,0,1,3.1,1.1,5,5,0,0,1,1.1,3.4,4.5,4.5,0,0,1-1.1,3.3,4.2,4.2,0,0,1-3.1,1.2h-3.1Zm.9,8.2h1.8a4.7,4.7,0,0,0,1.7-.2,2.5,2.5,0,0,0,1.8-1.8,8.8,8.8,0,0,0,.2-1.7,9,9,0,0,0-.2-1.8,3,3,0,0,0-1.8-1.8l-1.7-.2h-1.8Z" style="fill: #fff"/>
+  </g>
+  <g>
+    <rect width="368.5" height="226.77" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line y1="198.4" x2="368.5" y2="198.4" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line y1="170.1" x2="198.4" y2="170.1" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line y1="141.7" x2="368.5" y2="141.7" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line y1="113.4" x2="368.5" y2="113.4" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line y1="85" x2="368.5" y2="85" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line y1="56.7" x2="368.5" y2="56.7" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line y1="28.3" x2="368.5" y2="28.3" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="340.2" x2="340.2" y2="226.8" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="311.8" x2="311.8" y2="141.7" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="283.5" x2="283.5" y2="141.7" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="311.8" y1="198.4" x2="311.8" y2="340.2" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="283.5" y1="198.4" x2="283.5" y2="340.2" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="255.1" x2="255.1" y2="141.7" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="255.1" y1="198.4" x2="255.1" y2="340.2" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="226.8" x2="226.8" y2="141.7" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="226.8" y1="198.4" x2="226.8" y2="340.2" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="198.4" x2="198.4" y2="226.8" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="170.1" x2="170.1" y2="226.8" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="141.7" x2="141.7" y2="226.8" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="113.4" x2="113.4" y2="226.8" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="85" x2="85" y2="226.8" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="56.7" x2="56.7" y2="226.8" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="28.3" x2="28.3" y2="226.8" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+    <line x1="340.2" y1="170.1" x2="538.6" y2="170.1" style="fill: none;stroke: #fff;stroke-miterlimit: 10;stroke-width: 0.28346456692913385px"/>
+  </g>
+</svg>
diff --git a/PrusaResearch/sl1s_bed.stl b/PrusaResearch/sl1s_bed.stl
new file mode 100644
index 0000000..a9bca83
--- /dev/null
+++ b/PrusaResearch/sl1s_bed.stl
diff --git a/TriLAB.idx b/TriLAB.idx
index c5fc4e3..1d42aa6 100644
--- a/TriLAB.idx
+++ b/TriLAB.idx
@@ -1,3 +1,5 @@
+min_slic3r_version = 2.3.2-alpha0
+0.0.8 Added new AzteQ Industrial printer, added DeltiQ 2 profiles for 0.6mm nozzle, added material ASA 275 (Spectrum), some minor setting improvements
 min_slic3r_version = 2.3.0-alpha3
 0.0.7 Added PLA, PETG profiles for 0.25 nozzle, fixed supports on 0.8 nozzle profile, fixed max volumetric speed, disabled elefant foot compensation
 0.0.6 Added material TPU 93A (SMARTFIL)
diff --git a/TriLAB.ini b/TriLAB.ini
index 74fc08a..4c8b97b 100644
--- a/TriLAB.ini
+++ b/TriLAB.ini
@@ -6,7 +6,7 @@
 name = TriLAB
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.7
+config_version = 0.0.8
 # Where to get the updates from?
 config_update_url = 
 #https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/
@@ -16,23 +16,32 @@ config_update_url =
 # also the first model installed & the first nozzle installed will be activated after install.
 # Printer model name will be shown by the installation wizard.
 
+[printer_model:AQI]
+name = AzteQ Industrial
+variants = 0.4; 0.6
+technology = FFF
+family = AzteQ
+bed_model = aq_bed.stl
+bed_texture = aq_bed_texture.svg
+default_materials = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum);AzteQ Industrial (Door Opened) - PLA - Generic;AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum);AzteQ Industrial - ABS - ExtraFill (Fillamentum);AzteQ Industrial - ABS - Generic;AzteQ Industrial - ASA - ExtraFill (Fillamentum);AzteQ Industrial - ASA - Generic;AzteQ Industrial - ASA - Prusament (Prusa);AzteQ Industrial - PA - Nylon PA12 (Fiberlogy);AzteQ Industrial - PC Blend - Prusament (Prusa)
+
 [printer_model:DQ2]
 name = DeltiQ 2
-variants = 0.4; 0.25; 0.8
+variants = 0.4; 0.25; 0.6; 0.8
 technology = FFF
 family = DeltiQ 2
 bed_model = dq2_bed.stl
 bed_texture = dq2_bed_texture.svg
-default_materials = DeltiQ - PLA - Generic; DeltiQ - PETG - Generic; DeltiQ - ABS - Generic; DeltiQ - PLA - ExtraFill (Fillamentum); DeltiQ - PETG (Devil Design); DeltiQ - ABS - ExtraFill (Fillamentum); DeltiQ - ASA - ExtraFill (Fillamentum); DeltiQ - CPE - HG100 (Fillamentum); DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL); DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle; DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle
+default_materials = DeltiQ - PLA - Generic;DeltiQ - PLA - ExtraFill (Fillamentum);DeltiQ - PETG - Generic;DeltiQ - PETG (Devil Design);DeltiQ - ABS - Generic;DeltiQ - ABS - ExtraFill (Fillamentum);DeltiQ - ASA - ExtraFill (Fillamentum);DeltiQ - ASA - ASA 275 (Spectrum);DeltiQ - CPE - HG100 (Fillamentum);DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle;DeltiQ - PETG (Devil Design) @0.25 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - PETG (Devil Design) @0.6 nozzle;DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle;DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle;DeltiQ - PETG (Devil Design) @0.8 nozzle
 
 [printer_model:DQ2P]
 name = DeltiQ 2 Plus
-variants = 0.4; 0.25; 0.8
+variants = 0.4; 0.25; 0.6; 0.8
 technology = FFF
 family = DeltiQ 2
 bed_model = dq2_bed.stl
 bed_texture = dq2_bed_texture.svg
-default_materials = DeltiQ - PLA - Generic; DeltiQ - PETG - Generic; DeltiQ - ABS - Generic; DeltiQ - PLA - ExtraFill (Fillamentum); DeltiQ - PETG (Devil Design); DeltiQ - ABS - ExtraFill (Fillamentum); DeltiQ - ASA - ExtraFill (Fillamentum); DeltiQ - CPE - HG100 (Fillamentum); DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle
+default_materials = DeltiQ - PLA - Generic;DeltiQ - PLA - ExtraFill (Fillamentum);DeltiQ - PETG - Generic;DeltiQ - PETG (Devil Design);DeltiQ - ABS - Generic;DeltiQ - ABS - ExtraFill (Fillamentum);DeltiQ - ASA - ExtraFill (Fillamentum);DeltiQ - ASA - ASA 275 (Spectrum);DeltiQ - CPE - HG100 (Fillamentum);DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle;DeltiQ - PETG (Devil Design) @0.25 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - PETG (Devil Design) @0.6 nozzle;DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle;DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle;DeltiQ - PETG (Devil Design) @0.8 nozzle
 
 [printer_model:DQ2+FP2]
 name = DeltiQ 2 + FlexPrint 2
@@ -41,7 +50,7 @@ technology = FFF
 family = DeltiQ 2
 bed_model = dq2_bed.stl
 bed_texture = dq2_bed_texture.svg
-default_materials = DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL)
+default_materials = DeltiQ FP2 - PLA - Generic;DeltiQ FP2 - PLA - ExtraFill (Fillamentum);DeltiQ FP2 - PETG - Generic;DeltiQ FP2 - PETG (Devil Design);DeltiQ FP2 - ABS - Generic;DeltiQ FP2 - ABS - ExtraFill (Fillamentum);DeltiQ FP2 - ASA - ExtraFill (Fillamentum);DeltiQ FP2 - CPE - HG100 (Fillamentum);DeltiQ FP2 - FLEX - Generic;DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 93A (SMARTFIL)
 
 [printer_model:DQ2P+FP2]
 name = DeltiQ 2 Plus + FlexPrint 2
@@ -50,7 +59,7 @@ technology = FFF
 family = DeltiQ 2
 bed_model = dq2_bed.stl
 bed_texture = dq2_bed_texture.svg
-default_materials = DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL)
+default_materials = DeltiQ FP2 - PLA - Generic;DeltiQ FP2 - PLA - ExtraFill (Fillamentum);DeltiQ FP2 - PETG - Generic;DeltiQ FP2 - PETG (Devil Design);DeltiQ FP2 - ABS - Generic;DeltiQ FP2 - ABS - ExtraFill (Fillamentum);DeltiQ FP2 - ASA - ExtraFill (Fillamentum);DeltiQ FP2 - CPE - HG100 (Fillamentum);DeltiQ FP2 - FLEX - Generic;DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 93A (SMARTFIL)
 
 [printer_model:DQ2+FP]
 name = DeltiQ 2 + FlexPrint
@@ -59,7 +68,7 @@ technology = FFF
 family = DeltiQ 2
 bed_model = dq2_bed.stl
 bed_texture = dq2_bed_texture.svg
-default_materials = DeltiQ FP - PLA - Generic; DeltiQ FP - PETG - Generic; DeltiQ FP - ABS - Generic; DeltiQ FP - PLA - ExtraFill (Fillamentum); DeltiQ FP - PETG (Devil Design); DeltiQ FP - ABS - ExtraFill (Fillamentum); DeltiQ FP - ASA - ExtraFill (Fillamentum); DeltiQ FP - CPE - HG100 (Fillamentum); DeltiQ FP - FLEX - Generic; 
+default_materials = DeltiQ FP - PLA - Generic;DeltiQ FP - PLA - ExtraFill (Fillamentum);DeltiQ FP - PETG - Generic;DeltiQ FP - PETG (Devil Design);DeltiQ FP - ABS - Generic;DeltiQ FP - ABS - ExtraFill (Fillamentum);DeltiQ FP - ASA - ExtraFill (Fillamentum);DeltiQ FP - CPE - HG100 (Fillamentum);DeltiQ FP - FLEX - Generic
 
 [printer_model:DQ2P+FP]
 name = DeltiQ 2 Plus + FlexPrint
@@ -68,7 +77,7 @@ technology = FFF
 family = DeltiQ 2
 bed_model = dq2_bed.stl
 bed_texture = dq2_bed_texture.svg
-default_materials = DeltiQ FP - PLA - Generic; DeltiQ FP - PETG - Generic; DeltiQ FP - ABS - Generic; DeltiQ FP - PLA - ExtraFill (Fillamentum); DeltiQ FP - PETG (Devil Design); DeltiQ FP - ABS - ExtraFill (Fillamentum); DeltiQ FP - ASA - ExtraFill (Fillamentum); DeltiQ FP - CPE - HG100 (Fillamentum); DeltiQ FP - FLEX - Generic
+default_materials = DeltiQ FP - PLA - Generic;DeltiQ FP - PLA - ExtraFill (Fillamentum);DeltiQ FP - PETG - Generic;DeltiQ FP - PETG (Devil Design);DeltiQ FP - ABS - Generic;DeltiQ FP - ABS - ExtraFill (Fillamentum);DeltiQ FP - ASA - ExtraFill (Fillamentum);DeltiQ FP - CPE - HG100 (Fillamentum);DeltiQ FP - FLEX - Generic
 
 [printer_model:DQM]
 name = DeltiQ M
@@ -91,22 +100,21 @@ technology = FFF
 family = DeltiQ
 default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
 
-# All presets starting with asterisk, for example *common*, are intermediate and they will
-# not make it into the user interface.
+# DeltiQ print styles #
 
 [print:DeltiQ 0.20mm Normal]
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.7
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 95%
 bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and nozzle_diameter[0]==0.4
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.4
 complete_objects = 0
 default_acceleration = 2000
 dont_support_bridges = 0
@@ -178,7 +186,8 @@ support_material = 0
 support_material_angle = 30
 support_material_auto = 1
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.1
+support_material_contact_distance_top = 0.1
+support_material_contact_distance_bottom = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
@@ -211,11 +220,11 @@ wipe_tower_x = 180
 wipe_tower_y = 140
 xy_size_compensation = 0
 
-[print:DeltiQ 0.10mm Normal]
+[print:DeltiQ 0.10mm Detail]
 inherits = DeltiQ 0.20mm Normal
 bottom_solid_layers = 7
 bottom_solid_min_thickness = 0.7
-bridge_flow_ratio = 0.7
+bridge_flow_ratio = 70%
 bridge_speed = 30
 ensure_vertical_shell_thickness = 1
 layer_height = 0.1
@@ -230,7 +239,7 @@ fill_density = 20%
 inherits = DeltiQ 0.20mm Normal
 bottom_solid_layers = 5
 bottom_solid_min_thickness = 0.7
-bridge_flow_ratio = 0.7
+bridge_flow_ratio = 70%
 bridge_speed = 30
 ensure_vertical_shell_thickness = 1
 layer_height = 0.15
@@ -253,8 +262,8 @@ thin_walls = 0
 [print:DeltiQ 0.20mm FLEX]
 inherits = DeltiQ 0.20mm Normal
 avoid_crossing_perimeters = 0
-bridge_flow_ratio = 0.80
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*FLEXPRINT.*/ and nozzle_diameter[0]==0.4
+bridge_flow_ratio = 80%
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT.*/ and nozzle_diameter[0]==0.4
 extra_perimeters = 1
 only_retract_when_crossing_perimeters = 1
 extrusion_width = 0.40
@@ -272,7 +281,8 @@ perimeter_speed = 25
 small_perimeter_speed = 20
 solid_infill_speed = 30
 solid_infill_extrusion_width = 0.45
-support_material_contact_distance = 0.3
+support_material_contact_distance_top = 0.3
+support_material_contact_distance_bottom = 0.3
 support_material_speed = 30
 top_solid_infill_speed = 20
 top_fill_pattern = rectilinear
@@ -287,8 +297,7 @@ inherits = DeltiQ 0.20mm Normal
 bottom_solid_layers = 6
 bottom_solid_min_thickness = 0.5
 bridge_speed = 60
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and nozzle_diameter[0]==0.25
-elefant_foot_compensation = 0.0
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.25
 external_perimeter_extrusion_width = 0.27
 extrusion_width = 0.25
 first_layer_extrusion_width = 0.26
@@ -302,7 +311,8 @@ perimeters = 5
 solid_infill_extrusion_width = 0.27
 skirts = 2
 support_material_extrusion_width = 0.27
-support_material_contact_distance = 0.1
+support_material_contact_distance_top = 0.1
+support_material_contact_distance_bottom = 0.1
 top_infill_extrusion_width = 0.27
 top_solid_layers = 6
 top_solid_min_thickness = 0.5
@@ -313,13 +323,41 @@ inherits = DeltiQ 0.07mm Quality @0.25 nozzle
 first_layer_height = 0.2
 layer_height = 0.2
 
+[print:DeltiQ 0.30mm Normal @0.6 nozzle]
+inherits = DeltiQ 0.20mm Normal
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.6
+external_perimeter_extrusion_width = 0.68
+extrusion_width = 0.65
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+infill_extrusion_width = 0.68
+layer_height = 0.3
+perimeter_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance_top = 0.2
+support_material_contact_distance_bottom = 0.2
+support_material_extrusion_width = 0.55
+support_material_interface_spacing = 0.6
+support_material_xy_spacing = 0.9
+top_infill_extrusion_width = 0.6
+
+[print:DeltiQ 0.30mm Strong @0.6 nozzle]
+inherits = DeltiQ 0.30mm Normal @0.6 nozzle
+fill_density = 50%
+perimeters = 3
+
+[print:DeltiQ 0.35mm Fast @0.6 nozzle]
+inherits = DeltiQ 0.30mm Normal @0.6 nozzle
+fill_density = 10%
+layer_height = 0.35
+
 [print:DeltiQ 0.40mm Normal @0.8 nozzle]
 inherits = DeltiQ 0.20mm Normal
 bottom_solid_layers = 3
 bottom_solid_min_thickness = 1.2
-bridge_flow_ratio = 0.90
+bridge_flow_ratio = 90%
 bridge_speed = 20
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and nozzle_diameter[0]==0.8
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.8
 external_perimeter_extrusion_width = 0.80
 external_perimeter_speed = 30
 extrusion_width = 0.80
@@ -341,7 +379,8 @@ small_perimeter_speed = 20
 solid_infill_extrusion_width = 0.8
 solid_infill_speed = 60
 support_material_extrusion_width = 0.8
-support_material_contact_distance = 0.2
+support_material_contact_distance_top = 0.2
+support_material_contact_distance_bottom = 0.2
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 40
 top_solid_layers = 4
@@ -358,6 +397,181 @@ spiral_vase = 1
 ensure_vertical_shell_thickness = 1
 thin_walls = 0
 
+# AzteQ print styles #
+
+[print:AzteQ Industrial 0.20mm Normal]
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.7
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 95%
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 2000
+dont_support_bridges = 0
+draft_shield = 0
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 65
+extruder_clearance_radius = 65
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 2000
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 60
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}_{timestamp}.gcode
+overhangs = 1
+perimeter_acceleration = 1500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 10
+skirt_height = 2
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 20
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 30
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance_top = 0.1
+support_material_contact_distance_bottom = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 4
+support_material_interface_spacing = 0.4
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 40
+support_material_with_sheath = 0
+support_material_xy_spacing = 0.6
+thin_walls = 0
+threads = 12
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+top_solid_layers = 5
+top_solid_min_thickness = 0.7
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:AzteQ Industrial 0.15mm Detail]
+inherits = AzteQ Industrial 0.20mm Normal
+layer_height = 0.15
+
+[print:AzteQ Industrial 0.20mm Strong]
+inherits = AzteQ Industrial 0.20mm Normal
+fill_density = 50%
+perimeters = 3
+
+[print:AzteQ Industrial 0.20mm Vase]
+inherits = AzteQ Industrial 0.20mm Normal
+ensure_vertical_shell_thickness = 1
+fill_density = 0%
+perimeters = 1
+spiral_vase = 1
+top_solid_layers = 0
+
+[print:AzteQ Industrial 0.25mm Fast]
+inherits = AzteQ Industrial 0.20mm Normal
+fill_density = 10%
+layer_height = 0.25
+
+[print:AzteQ Industrial 0.30mm Normal @0.6 nozzle]
+inherits = AzteQ Industrial 0.20mm Normal
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+external_perimeter_extrusion_width = 0.68
+extrusion_width = 0.65
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+infill_extrusion_width = 0.68
+layer_height = 0.3
+perimeter_extrusion_width = 0.68
+solid_infill_extrusion_width = 0.68
+support_material_contact_distance_top = 0.2
+support_material_contact_distance_bottom = 0.2
+support_material_extrusion_width = 0.55
+support_material_interface_spacing = 0.6
+support_material_xy_spacing = 0.9
+top_infill_extrusion_width = 0.6
+
+[print:AzteQ Industrial 0.30mm Strong @0.6 nozzle]
+inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle
+fill_density = 50%
+perimeters = 3
+
+[print:AzteQ Industrial 0.35mm Fast @0.6 nozzle]
+inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle
+fill_density = 10%
+layer_height = 0.35
+
+# DeltiQ filaments #
 
 [filament:*DeltiQ common*]
 compatible_printers = 
@@ -374,9 +588,9 @@ filament_soluble = 0
 filament_toolchange_delay = 0
 start_filament_gcode = "; FILAMENT_START_GCODE"
 end_filament_gcode = "; FILAMENT_END_GCODE"
+filament_vendor = Generic
 
-
-# DeltiQ Filaments #
+# DeltiQ PLA filaments #
 
 [filament:DeltiQ - PLA - Generic]
 inherits = *DeltiQ common* 
@@ -385,8 +599,7 @@ bridge_fan_speed = 100
 cooling = 1
 fan_always_on = 1
 fan_below_layer_time = 100
-filament_vendor = Fillamentum
-filament_cost = 767
+filament_cost = 750
 filament_density = 1.24
 filament_max_volumetric_speed = 8
 filament_retract_before_travel = 2
@@ -405,6 +618,54 @@ min_print_speed = 10
 slowdown_below_layer_time = 4
 temperature = 215
 
+[filament:DeltiQ - PLA - ExtraFill (Fillamentum)]
+inherits = DeltiQ - PLA - Generic
+filament_cost = 750
+filament_density = 1.24
+filament_vendor = Fillamentum
+
+[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle]
+inherits = DeltiQ - PLA - ExtraFill (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25
+
+[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle]
+inherits = DeltiQ - PLA - ExtraFill (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle]
+inherits = DeltiQ - PLA - ExtraFill (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8
+disable_fan_first_layers = 1
+filament_max_volumetric_speed = 40
+first_layer_temperature = 230
+slowdown_below_layer_time = 8
+temperature = 230
+filament_retract_layer_change = 0
+filament_retract_length = 4.1
+filament_retract_speed = 45
+filament_deretract_speed = 25
+
+[filament:DeltiQ FP - PLA - Generic]
+inherits = DeltiQ - PLA - Generic
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
+filament_retract_length = 0.7
+filament_retract_speed = 28
+
+[filament:DeltiQ FP - PLA - ExtraFill (Fillamentum)]
+inherits = DeltiQ FP - PLA - Generic
+
+[filament:DeltiQ FP2 - PLA - Generic]
+inherits = DeltiQ FP - PLA - Generic
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
+filament_retract_length = 1.2
+filament_retract_speed = 28
+
+[filament:DeltiQ FP2 - PLA - ExtraFill (Fillamentum)]
+inherits = DeltiQ FP2 - PLA - Generic
+
+# DeltiQ PETG filaments #
+
 [filament:DeltiQ - PETG - Generic]
 inherits = *DeltiQ common* 
 bed_temperature = 80
@@ -412,7 +673,6 @@ bridge_fan_speed = 50
 cooling = 1
 fan_always_on = 1
 fan_below_layer_time = 20
-filament_vendor = DevilDesign
 filament_cost = 480
 filament_density = 1.27
 filament_deretract_speed = 25
@@ -433,6 +693,61 @@ min_print_speed = 10
 slowdown_below_layer_time = 5
 temperature = 245
 
+[filament:DeltiQ - PETG (Devil Design)]
+inherits = DeltiQ - PETG - Generic
+filament_cost = 480
+filament_density = 1.27
+filament_vendor = DevilDesign
+
+[filament:DeltiQ - PETG (Devil Design) @0.25 nozzle]
+inherits = DeltiQ - PETG (Devil Design)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25
+first_layer_temperature = 225
+temperature = 220
+max_fan_speed = 65
+min_fan_speed = 40
+bridge_fan_speed = 100
+
+[filament:DeltiQ - PETG (Devil Design) @0.6 nozzle]
+inherits = DeltiQ - PETG (Devil Design)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:DeltiQ - PETG (Devil Design) @0.8 nozzle]
+inherits = DeltiQ - PETG (Devil Design)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8
+filament_max_volumetric_speed = 40
+first_layer_temperature = 240
+slowdown_below_layer_time = 8
+temperature = 240
+filament_retract_layer_change = 0
+filament_retract_length = 4.3
+filament_retract_speed = 45
+filament_deretract_speed = 25
+filament_retract_before_wipe = 80%
+filament_wipe = 1
+
+[filament:DeltiQ FP - PETG - Generic]
+inherits = DeltiQ - PETG - Generic
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
+filament_retract_length = 0.7
+filament_retract_speed = 25
+
+[filament:DeltiQ FP - PETG (Devil Design)]
+inherits = DeltiQ FP - PETG - Generic
+
+[filament:DeltiQ FP2 - PETG - Generic]
+inherits = DeltiQ FP - PETG - Generic
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
+filament_retract_length = 1.4
+filament_retract_speed = 35
+filament_retract_before_wipe = 0%
+
+[filament:DeltiQ FP2 - PETG (Devil Design)]
+inherits = DeltiQ FP2 - PETG - Generic
+
+# DeltiQ ABS filaments #
+
 [filament:DeltiQ - ABS - Generic]
 inherits = *DeltiQ common* 
 bed_temperature = 100
@@ -440,9 +755,8 @@ bridge_fan_speed = 25
 cooling = 1
 fan_always_on = 1
 fan_below_layer_time = 20
-filament_vendor = Fillamentum
-filament_cost = 774
-filament_density = 1.08
+filament_cost = 639
+filament_density = 1.04
 filament_max_volumetric_speed = 8
 filament_retract_before_travel = 3
 filament_retract_before_wipe = 70%
@@ -460,23 +774,95 @@ min_print_speed = 10
 slowdown_below_layer_time = 15
 temperature = 255
 
-[filament:DeltiQ - PLA - ExtraFill (Fillamentum)]
-inherits = DeltiQ - PLA - Generic
+[filament:DeltiQ - ABS - ExtraFill (Fillamentum)]
+inherits = DeltiQ - ABS - Generic
+filament_cost = 639
+filament_density = 1.04
+filament_vendor = Fillamentum
 
-[filament:DeltiQ - PETG (Devil Design)]
-inherits = DeltiQ - PETG - Generic
+[filament:DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle]
+inherits = DeltiQ - ABS - ExtraFill (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
 
-[filament:DeltiQ - ABS - ExtraFill (Fillamentum)]
+[filament:DeltiQ FP - ABS - Generic]
 inherits = DeltiQ - ABS - Generic
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
+filament_retract_length = 0.7
+filament_retract_speed = 25
+
+[filament:DeltiQ FP - ABS - ExtraFill (Fillamentum)]
+inherits = DeltiQ FP - ABS - Generic
+
+[filament:DeltiQ FP2 - ABS - Generic]
+inherits = DeltiQ FP - ABS - Generic
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
+filament_retract_length = 0.8
+filament_retract_speed = 25
+
+[filament:DeltiQ FP2 - ABS - ExtraFill (Fillamentum)]
+inherits = DeltiQ FP2 - ABS - Generic
+
+# DeltiQ ASA filaments #
 
 [filament:DeltiQ - ASA - ExtraFill (Fillamentum)]
 inherits = DeltiQ - ABS - Generic
+filament_cost = 739
 filament_density = 1.07
 filament_type = ASA
 filament_vendor = Fillamentum
 first_layer_temperature = 265
 temperature = 265
 
+[filament:DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle]
+inherits = DeltiQ - ASA - ExtraFill (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:DeltiQ FP - ASA - ExtraFill (Fillamentum)]
+inherits = DeltiQ - ASA - ExtraFill (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
+filament_retract_length = 0.7
+filament_retract_speed = 25
+
+[filament:DeltiQ FP2 - ASA - ExtraFill (Fillamentum)]
+inherits = DeltiQ FP - ASA - ExtraFill (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
+
+[filament:DeltiQ - ASA - ASA 275 (Spectrum)]
+inherits = *DeltiQ common* 
+bed_temperature = 55
+bridge_fan_speed = 80
+cooling = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_vendor = Spectrum
+filament_cost = 587
+filament_density = 1.07
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.3
+filament_retract_speed = 25
+filament_type = ASA
+filament_wipe = 1
+first_layer_bed_temperature = 55
+first_layer_temperature = 230
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 15
+temperature = 230
+
+[filament:DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle]
+inherits = DeltiQ - ASA - ASA 275 (Spectrum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+# DeltiQ CPE filaments #
+
 [filament:DeltiQ - CPE - HG100 (Fillamentum)]
 inherits = *DeltiQ common* 
 bed_temperature = 90
@@ -485,7 +871,7 @@ cooling = 1
 fan_always_on = 1
 fan_below_layer_time = 20
 filament_vendor = Fillamentum
-filament_cost = 1214
+filament_cost = 1003
 filament_density = 1.25
 filament_deretract_speed = 25
 filament_max_volumetric_speed = 8
@@ -505,66 +891,28 @@ min_print_speed = 10
 slowdown_below_layer_time = 5
 temperature = 260
 
-[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle]
-inherits = DeltiQ - PLA - ExtraFill (Fillamentum)
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25
-
-[filament:DeltiQ - PETG (Devil Design) @0.25 nozzle]
-inherits = DeltiQ - PETG (Devil Design)
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25
-first_layer_temperature = 225
-temperature = 220
-max_fan_speed = 65
-min_fan_speed = 40
-bridge_fan_speed = 100
-
-[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle]
-inherits = DeltiQ - PLA - ExtraFill (Fillamentum)
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8
-disable_fan_first_layers = 1
-filament_max_volumetric_speed = 40
-first_layer_temperature = 230
-slowdown_below_layer_time = 8
-temperature = 230
-filament_retract_layer_change = 0
-filament_retract_length = 4.1
-filament_retract_speed = 45
-filament_deretract_speed = 25
-
-[filament:DeltiQ - PETG (Devil Design) @0.8 nozzle]
-inherits = DeltiQ - PETG (Devil Design)
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8
-filament_max_volumetric_speed = 40
-first_layer_temperature = 240
-slowdown_below_layer_time = 8
-temperature = 240
-filament_retract_layer_change = 0
-filament_retract_length = 4.3
-filament_retract_speed = 45
-filament_deretract_speed = 25
-filament_retract_before_wipe = 80%
-filament_wipe = 1
-
-
-# DeltiQ FlexPrint Filaments #
-
-[filament:DeltiQ FP - PLA - Generic]
-inherits = DeltiQ - PLA - Generic
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
-filament_retract_length = 0.7
-filament_retract_speed = 28
+[filament:DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle]
+inherits = DeltiQ - CPE - HG100 (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
 
-[filament:DeltiQ FP - PETG - Generic]
-inherits = DeltiQ - PETG - Generic
+[filament:DeltiQ FP - CPE - HG100 (Fillamentum)]
+inherits = DeltiQ - CPE - HG100 (Fillamentum)
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
 filament_retract_length = 0.7
 filament_retract_speed = 25
+filament_deretract_speed = 0
+filament_retract_before_wipe = 0%
 
-[filament:DeltiQ FP - ABS - Generic]
-inherits = DeltiQ - ABS - Generic
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
-filament_retract_length = 0.7
-filament_retract_speed = 25
+[filament:DeltiQ FP2 - CPE - HG100 (Fillamentum)]
+inherits = DeltiQ FP - CPE - HG100 (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
+filament_retract_length = 0.8
+filament_retract_speed = 35
+filament_deretract_speed = 0
+filament_retract_before_wipe = 0%
+
+# DeltiQ FLEX filaments #
 
 [filament:DeltiQ FP - FLEX - Generic]
 inherits = *DeltiQ common*
@@ -598,72 +946,6 @@ min_print_speed = 5
 slowdown_below_layer_time = 4
 temperature = 240
 
-[filament:DeltiQ FP - PLA - ExtraFill (Fillamentum)]
-inherits = DeltiQ FP - PLA - Generic
-
-[filament:DeltiQ FP - PETG (Devil Design)]
-inherits = DeltiQ FP - PETG - Generic
-
-[filament:DeltiQ FP - ABS - ExtraFill (Fillamentum)]
-inherits = DeltiQ FP - ABS - Generic
-
-[filament:DeltiQ FP - ASA - ExtraFill (Fillamentum)]
-inherits = DeltiQ - ASA - ExtraFill (Fillamentum)
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
-filament_retract_length = 0.7
-filament_retract_speed = 25
-
-[filament:DeltiQ FP - CPE - HG100 (Fillamentum)]
-inherits = DeltiQ - CPE - HG100 (Fillamentum)
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4
-filament_retract_length = 0.7
-filament_retract_speed = 25
-filament_deretract_speed = 0
-filament_retract_before_wipe = 0%
-
-
-# DeltiQ FlexPrint 2 Filaments #
-
-[filament:DeltiQ FP2 - PLA - Generic]
-inherits = DeltiQ FP - PLA - Generic
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
-filament_retract_length = 1.2
-filament_retract_speed = 28
-
-[filament:DeltiQ FP2 - PETG - Generic]
-inherits = DeltiQ FP - PETG - Generic
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
-filament_retract_length = 1.4
-filament_retract_speed = 35
-filament_retract_before_wipe = 0%
-
-[filament:DeltiQ FP2 - ABS - Generic]
-inherits = DeltiQ FP - ABS - Generic
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
-filament_retract_length = 0.8
-filament_retract_speed = 25
-
-[filament:DeltiQ FP2 - PLA - ExtraFill (Fillamentum)]
-inherits = DeltiQ FP2 - PLA - Generic
-
-[filament:DeltiQ FP2 - PETG (Devil Design)]
-inherits = DeltiQ FP2 - PETG - Generic
-
-[filament:DeltiQ FP2 - ABS - ExtraFill (Fillamentum)]
-inherits = DeltiQ FP2 - ABS - Generic
-
-[filament:DeltiQ FP2 - ASA - ExtraFill (Fillamentum)]
-inherits = DeltiQ FP - ASA - ExtraFill (Fillamentum)
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
-
-[filament:DeltiQ FP2 - CPE - HG100 (Fillamentum)]
-inherits = DeltiQ FP - CPE - HG100 (Fillamentum)
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
-filament_retract_length = 0.8
-filament_retract_speed = 35
-filament_deretract_speed = 0
-filament_retract_before_wipe = 0%
-
 [filament:DeltiQ FP2 - FLEX - Generic]
 inherits = DeltiQ FP - FLEX - Generic
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4
@@ -770,13 +1052,329 @@ min_print_speed = 10
 slowdown_below_layer_time = 4
 temperature = 235
 
+# AzteQ filaments #
+
+[filament:*AzteQ common*]
+inherits = *DeltiQ common* 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4
+
+# AzteQ Industrial filaments #
+
+[filament:AzteQ Industrial (Door Opened) - PLA - Generic]
+inherits = *AzteQ common* 
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_cost = 750
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_vendor = Generic
+filament_wipe = 1
+first_layer_bed_temperature = 50
+first_layer_temperature = 215
+full_fan_speed_layer = 0
+max_fan_speed = 100
+min_fan_speed = 90
+min_print_speed = 10
+slowdown_below_layer_time = 15
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Set and wait - chamber temperature"
+temperature = 210
+
+[filament:AzteQ Industrial (Door Opened) - PLA - Generic @0.6 nozzle]
+inherits = AzteQ Industrial (Door Opened) - PLA - Generic
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum)]
+inherits = AzteQ Industrial (Door Opened) - PLA - Generic
+filament_vendor = Fillamentum
+filament_cost = 750
+filament_density = 1.24
+
+[filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) @0.6 nozzle]
+inherits = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum)]
+inherits = *AzteQ common* 
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_cost = 750
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 6
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_vendor = Fillamentum
+filament_wipe = 1
+first_layer_bed_temperature = 50
+first_layer_temperature = 220
+full_fan_speed_layer = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Set and wait - chamber temperature"
+temperature = 215
+
+[filament:AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) @0.6 nozzle]
+inherits = AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:AzteQ Industrial - ABS - Generic]
+inherits = *AzteQ common* 
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_cost = 639
+filament_density = 1.04
+filament_deretract_speed = nil
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_spool_weight = 0
+filament_type = ABS
+filament_vendor = Generic
+filament_wipe = 1
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+full_fan_speed_layer = 0
+max_fan_speed = 100
+min_fan_speed = 80
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature"
+temperature = 255
+
+[filament:AzteQ Industrial - ABS - Generic @0.6 nozzle]
+inherits = AzteQ Industrial - ABS - Generic
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum)]
+inherits = AzteQ Industrial - ABS - Generic 
+filament_vendor = Fillamentum
+filament_cost = 639
+filament_density = 1.04
+
+[filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle]
+inherits = AzteQ Industrial - ABS - ExtraFill (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:AzteQ Industrial - ASA - Generic]
+inherits = *AzteQ common* 
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_cost = 739
+filament_density = 1.07
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_spool_weight = 0
+filament_type = ASA
+filament_vendor = Generic
+filament_wipe = 1
+first_layer_bed_temperature = 100
+first_layer_temperature = 265
+full_fan_speed_layer = 0
+max_fan_speed = 75
+min_fan_speed = 50
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature"
+temperature = 265
+
+[filament:AzteQ Industrial - ASA - Generic @0.6 nozzle]
+inherits = AzteQ Industrial - ASA - Generic
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum)]
+inherits = AzteQ Industrial - ASA - Generic
+filament_vendor = Fillamentum
+
+[filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.6 nozzle]
+inherits = AzteQ Industrial - ASA - ExtraFill (Fillamentum)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:AzteQ Industrial - ASA - Prusament (Prusa)]
+inherits = AzteQ Industrial - ASA - Generic
+filament_cost = 680
+filament_density = 1.07
+filament_spool_weight = 0
+filament_vendor = Prusa
+first_layer_temperature = 255
+max_fan_speed = 100
+min_fan_speed = 95
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature"
+temperature = 255
+
+[filament:AzteQ Industrial - ASA - Prusament (Prusa) @0.6 nozzle]
+inherits = AzteQ Industrial - ASA - Prusament (Prusa)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy)]
+inherits = *AzteQ common* 
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_cost = 1212
+filament_density = 1.02
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = NYLON
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = Fiberlogy
+filament_wipe = 1
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+full_fan_speed_layer = 0
+max_fan_speed = 75
+min_fan_speed = 50
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature"
+temperature = 255
+
+[filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy) @0.6 nozzle]
+inherits = AzteQ Industrial - PA - Nylon PA12 (Fiberlogy)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
+
+[filament:AzteQ Industrial - PC Blend - Prusament (Prusa)]
+inherits = *AzteQ common* 
+bed_temperature = 100
+bridge_fan_speed = 75
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_cost = 1156
+filament_density = 1.22
+filament_deretract_speed = nil
+filament_max_volumetric_speed = 8
+filament_retract_before_travel = 3
+filament_retract_before_wipe = 70%
+filament_retract_layer_change = 1
+filament_retract_length = 4.1
+filament_retract_lift = 0.2
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = 25
+filament_soluble = 0
+filament_spool_weight = 0
+filament_type = PC
+filament_vendor = Prusa
+filament_wipe = 1
+first_layer_bed_temperature = 100
+first_layer_temperature = 275
+full_fan_speed_layer = 0
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature"
+temperature = 275
+
+[filament:AzteQ Industrial - PC Blend - Prusament (Prusa) @0.6 nozzle]
+inherits = AzteQ Industrial - PC Blend - Prusament (Prusa)
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6
+filament_max_volumetric_speed = 15
            
 # DeltiQ Printer #
 
 [printer:*DeltiQ*]
 inherits = 
 bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]
 between_objects_gcode = 
 cooling_tube_length = 5
 cooling_tube_retraction = 91.5
@@ -790,7 +1388,7 @@ extruder_offset = 0x0
 gcode_flavor = repetier
 layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n
 max_layer_height = 0.25
-max_print_height = 320
+max_print_height = 300
 min_layer_height = 0.15
 nozzle_diameter = 0.4
 parking_pos_retraction = 92
@@ -807,13 +1405,13 @@ retract_length = 4.0
 retract_length_toolchange = 10
 retract_lift = 0.2
 retract_lift_above = 0
-retract_lift_below = 319
+retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 30
 silent_mode = 0
 single_extruder_multi_material = 0
-start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
+start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
 thumbnails = 
 toolchange_gcode = 
 use_firmware_retraction = 0
@@ -828,7 +1426,7 @@ inherits = *DeltiQ*
 printer_model = DQL
 printer_variant = 0.4
 bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013
-max_print_height = 320
+max_print_height = 300
 
 [printer:DeltiQ M]
 inherits = *DeltiQ*
@@ -839,7 +1437,7 @@ printer_model = DQM
 retract_length = 3.7
 retract_length_toolchange = 10
 retract_speed = 30
-start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-45 Y-77 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set Extruder Temperature and Wait\nG3 X45 Y-77 I45 J77 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
+start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-45 Y-77 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; Set Extruder Temperature and Wait\nG3 X45 Y-77 I45 J77 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder
 
 [printer:DeltiQ XL]
 inherits = *DeltiQ*
@@ -854,17 +1452,17 @@ retract_speed = 35
 inherits = *DeltiQ*
 before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
 end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100  ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors
-gcode_flavor = reprap
+gcode_flavor = reprapfirmware
 layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
 pause_print_gcode = M0
-start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT0 ; Select Titan extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
+start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT0 ; Select Titan extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2
 
 [printer:DeltiQ 2]
 inherits = *DeltiQ 2*
 printer_model = DQ2
 printer_variant = 0.4
-max_print_height = 320
+max_print_height = 300
 
 [printer:DeltiQ 2 - 0.25 nozzle]
 inherits = DeltiQ 2
@@ -875,11 +1473,20 @@ nozzle_diameter = 0.25
 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle"
 default_print_profile = DeltiQ 0.07mm Quality @0.25 nozzle
 
+[printer:DeltiQ 2 - 0.6 nozzle]
+inherits = DeltiQ 2
+printer_variant = 0.6
+max_layer_height = 0.4
+min_layer_height = 0.2
+nozzle_diameter = 0.6
+default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle"
+default_print_profile = DeltiQ 0.30mm Normal @0.6 nozzle
+
 [printer:DeltiQ 2 - 0.8 nozzle]
 inherits = DeltiQ 2
 printer_variant = 0.8
-max_layer_height = 0.4
-min_layer_height = 0.4
+max_layer_height = 0.6
+min_layer_height = 0.3
 nozzle_diameter = 0.8
 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle"
 default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle
@@ -899,18 +1506,27 @@ nozzle_diameter = 0.25
 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle"
 default_print_profile = DeltiQ 0.07mm Quality @0.25 nozzle
 
+[printer:DeltiQ 2 Plus - 0.6 nozzle]
+inherits = DeltiQ 2 Plus
+printer_variant = 0.6
+max_layer_height = 0.4
+min_layer_height = 0.2
+nozzle_diameter = 0.6
+default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle"
+default_print_profile = DeltiQ 0.30mm Normal @0.6 nozzle
+
 [printer:DeltiQ 2 Plus - 0.8 nozzle]
 inherits = DeltiQ 2 Plus
 printer_variant = 0.8
-max_layer_height = 0.4
-min_layer_height = 0.4
+max_layer_height = 0.6
+min_layer_height = 0.3
 nozzle_diameter = 0.8
 default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle"
 default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle
 
 [printer:*DeltiQ 2 FlexPrint*]
 inherits = *DeltiQ 2*
-start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
+start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder
 default_print_profile = DeltiQ 0.20mm FLEX
 default_filament_profile = "DeltiQ FP2 - FLEX - Generic"
 retract_length = 0.7
@@ -921,7 +1537,7 @@ printer_notes = Don't remove the following keywords! These keywords are used in
 inherits = *DeltiQ 2 FlexPrint*
 printer_model = DQ2+FP
 printer_variant = 0.4
-max_print_height = 320
+max_print_height = 300
 
 [printer:DeltiQ 2 Plus + FlexPrint]
 inherits = *DeltiQ 2 FlexPrint*
@@ -940,7 +1556,7 @@ printer_notes = Don't remove the following keywords! These keywords are used in
 inherits = *DeltiQ 2 FlexPrint 2*
 printer_model = DQ2+FP2
 printer_variant = 0.4
-max_print_height = 320
+max_print_height = 300
 
 [printer:DeltiQ 2 Plus + FlexPrint 2]
 inherits = *DeltiQ 2 FlexPrint 2*
@@ -948,6 +1564,44 @@ printer_model = DQ2P+FP2
 printer_variant = 0.4
 max_print_height = 500
 
+[printer:*AzteQ*]
+inherits = *DeltiQ 2*
+max_print_height = 400
+bed_shape = 149.429x13.0734,147.721x26.0472,144.889x38.8229,140.954x51.303,135.946x63.3927,129.904x75,122.873x86.0365,114.907x96.4181,106.066x106.066,96.4181x114.907,86.0365x122.873,75x129.904,63.3927x135.946,51.303x140.954,38.8229x144.889,26.0472x147.721,13.0734x149.429,9.18485e-15x150,-13.0734x149.429,-26.0472x147.721,-38.8229x144.889,-51.303x140.954,-63.3927x135.946,-75x129.904,-86.0365x122.873,-96.4181x114.907,-106.066x106.066,-114.907x96.4181,-122.873x86.0365,-129.904x75,-135.946x63.3927,-140.954x51.303,-144.889x38.8229,-147.721x26.0472,-149.429x13.0734,-150x1.83697e-14,-149.429x-13.0734,-147.721x-26.0472,-144.889x-38.8229,-140.954x-51.303,-135.946x-63.3927,-129.904x-75,-122.873x-86.0365,-114.907x-96.4181,-106.066x-106.066,-96.4181x-114.907,-86.0365x-122.873,-75x-129.904,-63.3927x-135.946,-51.303x-140.954,-38.8229x-144.889,-26.0472x-147.721,-13.0734x-149.429,-2.75546e-14x-150,13.0734x-149.429,26.0472x-147.721,38.8229x-144.889,51.303x-140.954,63.3927x-135.946,75x-129.904,86.0365x-122.873,96.4181x-114.907,106.066x-106.066,114.907x-96.4181,122.873x-86.0365,129.904x-75,135.946x-63.3927,140.954x-51.303,144.889x-38.8229,147.721x-26.0472,149.429x-13.0734,150x-3.67394e-14
+before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
+end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed heater\nM141 S0 ; Turn off chamber heater\nM104 S0 ; Turn off hotend heater\n\nG28 ; Home all axes\n\nM107 ; Turn off layer fan\n\nG90 ; Absolute positioning for motion\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5 ; Disable motor hold
+layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_AQ\nPRINTER_MODEL_AQI
+retract_before_travel = 3
+retract_before_wipe = 100%
+retract_layer_change = 1
+retract_length = 4
+retract_length_toolchange = 10
+retract_lift = 0.2
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = ; START_GCODE\nT0\nM220 S100 ; Set feedmultiply back to 100 percent\nG90 ; Absolute positioning for motion\nM83 ; Relative extruder\nM107 ; Layer fan off\n\nM140 S[first_layer_bed_temperature] ; Set and continue - bed temperature\n[start_filament_gcode]\nM104 S150 ; Set and continue - hotend probing temperature\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM109 S150 ; Set and wait - hotend probing temperature\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; Set and continue - printing temperature\n\nG1009 ; Purge hotend\nG92 E0 ; Zero extruder
+wipe = 1
+
+[printer:AzteQ Industrial]
+inherits = *AzteQ*
+printer_model = AQI
+printer_variant = 0.4
+max_print_height = 400
+default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum)"
+default_print_profile = AzteQ Industrial 0.30mm Normal
+
+[printer:AzteQ Industrial - 0.6 nozzle]
+inherits = AzteQ Industrial
+printer_variant = 0.6
+max_layer_height = 0.4
+min_layer_height = 0.2
+nozzle_diameter = 0.6
+default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle"
+default_print_profile = AzteQ Industrial 0.30mm Normal @0.6 nozzle
 
 [presets]
 print = DeltiQ 0.20mm Normal
diff --git a/TriLAB/AQI_thumbnail.png b/TriLAB/AQI_thumbnail.png
new file mode 100644
index 0000000..e889cfb
--- /dev/null
+++ b/TriLAB/AQI_thumbnail.png
diff --git a/TriLAB/aq_bed.stl b/TriLAB/aq_bed.stl
new file mode 100644
index 0000000..5f10436
--- /dev/null
+++ b/TriLAB/aq_bed.stl
diff --git a/TriLAB/aqp_bed.stl b/TriLAB/aqp_bed.stl
new file mode 100644
index 0000000..c82b3ae
--- /dev/null
+++ b/TriLAB/aqp_bed.stl
diff --git a/TriLAB/dq2_bed.stl b/TriLAB/dq2_bed.stl
index 6b8f20c..2da8298 100644
--- a/TriLAB/dq2_bed.stl
+++ b/TriLAB/dq2_bed.stl
diff --git a/Vertex.idx b/Vertex.idx
index 0919165..ff1abe2 100644
--- a/Vertex.idx
+++ b/Vertex.idx
@@ -1,4 +1,5 @@
 min_slic3r_version = 2.3.0-rc1
+0.1.14 some susi adaptation
 0.1.13 fix errors & warnings
 0.1.12 The changelog URL has been updated
 0.1.11 Fixed the VERTEX MINI printer model
diff --git a/Vertex.ini b/Vertex.ini
index 6d9f77f..219ee82 100644
--- a/Vertex.ini
+++ b/Vertex.ini
@@ -5,7 +5,7 @@
 name = Vertex
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.1.13
+config_version = 0.1.14
 # Where to get the updates from?
 config_update_url = https://vertex3dprinters.github.io/VERTEX-Slicer-Profiles/
 changelog_url = https://vertex3dprinters.github.io/VERTEX-Slicer-Profiles/?latest=slicer-profiles&lng=%1%
@@ -78,7 +78,7 @@ compatible_printers =
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0.2
+first_layer_size_compensation = -0.2
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeters_first = 0
@@ -139,7 +139,9 @@ support_material_interface_extruder = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_enforce_layers = 0
-support_material_contact_distance = 0.1
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.1
+support_material_contact_distance_bottom = 0.1
 support_material_interface_contact_loops = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
@@ -253,7 +255,9 @@ perimeter_extrusion_width = 0.65
 solid_infill_extrusion_width = 0.65
 top_infill_extrusion_width = 0.6
 support_material_extrusion_width = 0.55
-support_material_contact_distance = 0.15
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15
 support_material_xy_spacing = 80%
 support_material_interface_spacing = 0.3
 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
@@ -270,7 +274,9 @@ perimeter_extrusion_width = 0.9
 solid_infill_extrusion_width = 0.9
 top_infill_extrusion_width = 0.8
 support_material_extrusion_width = 0.7
-support_material_contact_distance = 0.25
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.25
+support_material_contact_distance_bottom = 0.25
 support_material_interface_spacing = 0.4
 support_material_interface_speed = 100%
 support_material_spacing = 2
@@ -317,7 +323,9 @@ top_infill_extrusion_width = 0.6
 support_material_extrusion_width = 0.55
 bridge_flow_ratio = 95%
 bridge_speed = 25
-support_material_contact_distance = 0.15
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.15
+support_material_contact_distance_bottom = 0.15
 support_material_xy_spacing = 80%
 fill_pattern = gyroid
 fill_density = 15%
@@ -338,7 +346,9 @@ bottom_solid_min_thickness = 0.6
 overhangs = 1
 skirts = 0
 support_material = 1
-support_material_contact_distance = 0
+support_material_contact_distance_type = none
+support_material_contact_distance_top = 0
+support_material_contact_distance_bottom = 0
 support_material_extruder = 4
 support_material_extrusion_width = 0.45
 support_material_interface_extruder = 4
@@ -850,7 +860,9 @@ infill_speed = 50
 max_print_speed = 50
 solid_infill_speed = 40
 support_material_speed = 35
-support_material_contact_distance = 0.25
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.25
+support_material_contact_distance_bottom = 0.25
 top_solid_infill_speed = 30
 external_perimeter_extrusion_width = 1
 perimeter_extrusion_width = 1
@@ -1104,7 +1116,9 @@ infill_acceleration = 1000
 infill_speed = 40
 solid_infill_speed = 40
 support_material_speed = 35
-support_material_contact_distance = 0.25
+support_material_contact_distance_type = filament
+support_material_contact_distance_top = 0.25
+support_material_contact_distance_bottom = 0.25
 top_solid_infill_speed = 28
 external_perimeter_extrusion_width = 1
 perimeter_extrusion_width = 1
@@ -3495,7 +3509,7 @@ retract_speed = 35
 serial_port = 
 serial_speed = 250000
 single_extruder_multi_material = 0
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 1
@@ -3537,7 +3551,7 @@ bed_shape = 0x0,250x0,250x210,0x210
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_VERTEX\nPRINTER_MODEL_MK3\n
 retract_lift_below = 209
 max_print_height = 210
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
 printer_model = VERTEX_MK3S
 default_print_profile = 0.15mm QUALITY @VERTEX
 
@@ -3548,7 +3562,7 @@ max_layer_height = 0.15
 min_layer_height = 0.05
 printer_variant = 0.25
 retract_lift = 0.15
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle XL.*/}M907 E430 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle XL.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle VERTEX
 printer_model = VERTEX_MK3S
 
@@ -3559,7 +3573,7 @@ nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX
 renamed_from = "Vertex MK3S 0.6 nozzle"
 printer_model = VERTEX_MK3S
@@ -3572,7 +3586,7 @@ max_layer_height = 0.6
 min_layer_height = 0.2
 printer_variant = 0.8
 retract_length = 1
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 default_print_profile = 0.40mm QUALITY @0.8 nozzle VERTEX
 default_filament_profile = Prusament PLA @0.8 nozzle VERTEX
 
@@ -3592,7 +3606,7 @@ default_filament_profile = Prusament PLA @VERTEXMMU2
 inherits = *mm2s*
 single_extruder_multi_material = 0
 default_filament_profile = Prusament PLA @VERTEX
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|@0.25 nozzle VERTEX).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
 
 [printer:VERTEX MK3S & MK3S+ MMU2S Single 0.6 nozzle]
@@ -3602,7 +3616,7 @@ nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX
 
 [printer:VERTEX MK3S & MK3S+ MMU2S Single 0.8 nozzle]
@@ -3613,7 +3627,7 @@ max_layer_height = 0.6
 min_layer_height = 0.2
 printer_variant = 0.8
 retract_length = 1
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle VERTEX
 default_filament_profile = Prusament PLA @0.8 nozzle VERTEX
 
@@ -3626,7 +3640,7 @@ max_layer_height = 0.15
 min_layer_height = 0.05
 printer_variant = 0.25
 retract_lift = 0.15
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle VERTEX
 
 [printer:VERTEX MK3S & MK3S+ MMU2S]
@@ -3635,7 +3649,7 @@ renamed_from = "VERTEX MK3S MMU2S"
 machine_max_acceleration_e = 8000,8000
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
 end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
 
 ## 0.6mm nozzle MMU2/S printer profiles
@@ -3647,7 +3661,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX
 
 
@@ -3681,7 +3695,7 @@ printer_notes = Don't remove the following keywords! These keywords are used in
 retract_lift_below = 209
 max_print_height = 425
 bed_shape = 0x0,300x0,300x300,0x300
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
 printer_model = VERTEX_XL
 default_print_profile = 0.15mm QUALITY @VERTEX
 
@@ -3692,7 +3706,7 @@ max_layer_height = 0.15
 min_layer_height = 0.05
 printer_variant = 0.25
 retract_lift = 0.15
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle XL.*/}M907 E430 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle XL.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle VERTEX
 
 [printer:Vertex XL 0.6 nozzle]
@@ -3701,7 +3715,7 @@ nozzle_diameter = 0.6
 max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX
 
 [printer:Vertex XL 0.8 nozzle]
@@ -3711,7 +3725,7 @@ max_layer_height = 0.6
 min_layer_height = 0.2
 printer_variant = 0.8
 retract_length = 1
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S[first_layer_temperature] ; set extruder temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S170 ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z3 F720 ; Go up Z 3mm \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.20 F720 ; Go down to Z 0.20mm\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}
 default_print_profile = 0.40mm QUALITY @0.8 nozzle VERTEX
 default_filament_profile = Prusament PLA @0.8 nozzle VERTEX
 
@@ -3737,7 +3751,7 @@ renamed_from = "VERTEX MK3S MMU2S Single"
 single_extruder_multi_material = 0
 default_filament_profile = Prusament PLA @VERTEX
 printer_model = VERTEX_XLMMU2S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|@0.25 nozzle VERTEX).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
 
 [printer:Vertex XL MMU2S Single 0.6 nozzle]
@@ -3749,7 +3763,7 @@ max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
 printer_model = VERTEX_XLMMU2S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX
 
 [printer:Vertex XL MMU2S Single 0.8 nozzle]
@@ -3761,7 +3775,7 @@ min_layer_height = 0.2
 printer_variant = 0.8
 retract_length = 1
 printer_model = VERTEX_XLMMU2S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.40mm QUALITY @0.8 nozzle VERTEX
 default_filament_profile = Prusament PLA @0.8 nozzle VERTEX
 
@@ -3775,7 +3789,7 @@ min_layer_height = 0.05
 printer_variant = 0.25
 retract_lift = 0.15
 printer_model = VERTEX_XLMMU2S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif}
 default_print_profile = 0.10mm DETAIL @0.25 nozzle VERTEX
 
 [printer:Vertex XL MMU2S]
@@ -3785,7 +3799,7 @@ machine_max_acceleration_e = 8000,8000
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
 printer_model = VERTEX_XLMMU2S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @VERTEX|DRAFT @VERTEX).*/}M907 E538 ; set extruder motor current{endif}
 end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @VERTEX|QUALITY @VERTEX|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
 
 ## 0.6mm nozzle MMU2/S printer profiles
@@ -3798,7 +3812,7 @@ max_layer_height = 0.40
 min_layer_height = 0.15
 printer_variant = 0.6
 printer_model = VERTEX_XLMMU2S
-start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nM880; check the steel sheet\nG90; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0
 default_print_profile = 0.30mm QUALITY @0.6 nozzle VERTEX
 
 ## MINI
@@ -3847,7 +3861,7 @@ retract_lift_below = 179
 retract_layer_change = 0
 silent_mode = 0
 remaining_times = 1
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\nM92 E415 ; set extruder steps for Vertex Extrusor+\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nM92 E415 ; set extruder steps for Vertex Extrusor+\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow
 end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors
 printer_notes = Don not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_VERTEX\nPRINTER_MODEL_MINI\n
 
@@ -3863,7 +3877,7 @@ default_print_profile = 0.10mm DETAIL @0.25 nozzle VERTEXMINI
 retract_length = 3
 retract_lift = 0.15
 retract_before_travel = 1
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\nM92 E415 ; set extruder steps for Vertex Extrusor+\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nM92 E415 ; set extruder steps for Vertex Extrusor+\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow
 
 [printer:VERTEX MINI & MINI+ 0.6 nozzle]
 inherits = VERTEX MINI & MINI+