update Zonestar profiles V1.0.1

Update ZONESTAR Profiles

Update ZONESTAR Profiles

update ZPNETSRA Profiles V1.0.2

6 files changed, 764 insertions, 107 deletions

diff --git a/Zonestar.idx b/Zonestar.idx
index 830a0fc..bcda1b5 100644
--- a/Zonestar.idx
+++ b/Zonestar.idx
@@ -1,3 +1,5 @@
 min_slic3r_version = 2.4.1
+1.0.2 Modify Z8+E4 hotend and Z9+E4 hotend settings
+1.0.1 Add one color setting for Z9 and Z8 Multi-Color Hotend, Enable Z lift and wipe for Z8 & Z9 with Multi-Color hotend
 1.0.1-slic3r slic3r adaptation + Zonestar changes?
 1.0.0 Initial version
diff --git a/Zonestar.ini b/Zonestar.ini
index bebe3ae..849fbb0 100644
--- a/Zonestar.ini
+++ b/Zonestar.ini
@@ -7,11 +7,10 @@
 name = Zonestar
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.1-slic3r
+config_version = 1.0.2
 # Where to get the updates from?
 config_update_url = 
-#https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Zonestar/
-#https://github.com/ZONESTAR3D/Slicing-Guide/tree/master/SuperSlicer/PrusaSlicer-2.4.0-rc%2Bwin64/resources/profiles
+# https://github.com/ZONESTAR3D/Slicing-Guide/tree/master/PrusaSlicer/Profiles
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
@@ -22,7 +21,7 @@ name = Zonestar Z5
 variants = 0.4
 technology = FFF
 bed_model = bed_220.stl
-bed_texture = bedtexture.png
+bed_texture = 220_texture.svg
 default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
 
 [printer_model:Z6]
@@ -30,7 +29,7 @@ name = Zonestar Z6
 variants = 0.4
 technology = FFF
 bed_model = bed_150.stl
-bed_texture = bedtexture.png
+bed_texture = 150_texture.svg
 default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
 
 [printer_model:Z5X]
@@ -38,7 +37,7 @@ name = Zonestar Z5X
 variants = 0.4
 technology = FFF
 bed_model = bed_310.stl
-bed_texture = bedtexture.png
+bed_texture = 310_texture.svg
 default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
 
 [printer_model:Z8]
@@ -46,7 +45,7 @@ name = Zonestar Z8
 variants = 0.4
 technology = FFF
 bed_model = bed_310.stl
-bed_texture = bedtexture.png
+bed_texture = 310_texture.svg
 default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
 
 [printer_model:Z9]
@@ -54,7 +53,7 @@ name = Zonestar Z9
 variants = 0.4
 technology = FFF
 bed_model = bed_310.stl
-bed_texture = bedtexture.png
+bed_texture = 310_texture.svg
 default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
 
 ###################
@@ -65,7 +64,7 @@ default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
-bottom_solid_layers = 3
+bottom_solid_layers = 4
 bottom_solid_min_thickness = 0
 bridge_acceleration = 0
 bridge_angle = 0
@@ -79,11 +78,11 @@ default_acceleration = 0
 dont_support_bridges = 1
 draft_shield = disabled
 elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 0
+ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 50%
 external_perimeters_first = 0
-extra_perimeters = 1
+extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0.45
@@ -96,15 +95,15 @@ solid_infill_extrusion_spacing =
 top_infill_extrusion_spacing =
 fill_angle = 45
 fill_density = 20%
-fill_pattern = stars
+fill_pattern = grid
 first_layer_acceleration = 0
 first_layer_acceleration_over_raft = 0
-first_layer_extrusion_width = 0.42
+first_layer_extrusion_width = 0.45
 first_layer_height = 0.3
-first_layer_speed = 25
+first_layer_speed = 15
 first_layer_min_speed = 0
 first_layer_infill_speed = 100%
-first_layer_speed_over_raft = 30
+first_layer_speed_over_raft = 25
 fuzzy_skin = none
 fuzzy_skin_point_dist = 0.8
 fuzzy_skin_thickness = 0.3
@@ -140,6 +139,8 @@ notes =
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {printer_model}_{input_filename_base}.gcode
+overhangs_width_speed = 75%
+overhangs_width = 75%
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
@@ -161,7 +162,7 @@ skirts = 0
 slice_closing_radius = 0.049
 slicing_mode = regular
 small_perimeter_speed = 15
-solid_infill_below_area = 70
+solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.45
@@ -196,12 +197,12 @@ support_material_xy_spacing = 50%
 bridge_type = nozzle
 bridge_overlap_min = 80%
 bridge_overlap = 95%
-thin_walls = 1
+thin_walls = 0
 threads = 4
 top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 15
-top_solid_layers = 3
+top_solid_layers = 5
 top_solid_min_thickness = 0
 travel_speed = 100
 travel_speed_z = 0
@@ -209,26 +210,13 @@ wipe_tower = 0
 xy_size_compensation = 0
 compatible_printers_condition = nozzle_diameter[0]==0.4 and num_extruders==1
 
-[print:*common_multi*]
+[print:0.20mm @Zonestar MULTI]
 inherits = *common*
-bridge_speed = 40
-infill_speed = 50
-output_filename_format = [input_filename_base].gcode
-perimeter_speed = 40
-travel_speed = 80
 wipe_tower = 1
-wipe_tower_bridging = 10
-wipe_tower_brim_width = 2
-wipe_tower_no_sparse_layers = 0
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
 wipe_tower_x = 125
 wipe_tower_y = 195
 compatible_printers_condition = nozzle_diameter[0]==0.4 and num_extruders>1
 
-[print:0.20mm @Zonestar MULTI]
-inherits = *common_multi*
-
 
 [print:0.20mm @Zonestar SINGLE]
 inherits = *common*
@@ -238,10 +226,9 @@ inherits = *common*
 ###################
 [filament:Generic ABS @Zonestar]
 bed_temperature = 100
-bridge_fan_speed = 100
+bridge_fan_speed = 30
 cooling = 1
 disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60
@@ -255,7 +242,6 @@ filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
 filament_minimal_purge_on_wipe_tower = 50
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_type = ABS
@@ -264,11 +250,10 @@ filament_unloading_speed_start = 60
 filament_vendor = Generic
 first_layer_bed_temperature = 100
 first_layer_temperature = 245
-max_fan_speed = 100
-min_fan_speed = 50
-min_print_speed = 10
-slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 15
+slowdown_below_layer_time = 25
 temperature = 245
 
 [filament:Generic PETG @Zonestar]
@@ -278,7 +263,7 @@ cooling = 1
 disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
 extrusion_multiplier = 1
-fan_always_on = 0
+fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #29B2B2
 filament_cooling_final_speed = 3.4
@@ -293,7 +278,6 @@ filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0|
 filament_spool_weight = 0
 filament_toolchange_delay = 0
 filament_type = PETG
-filament_unload_time = 0
 filament_unloading_speed = 40
 filament_unloading_speed_start = 60
 filament_vendor = Generic
@@ -336,12 +320,11 @@ filament_vendor = Generic
 filament_wipe = nil
 first_layer_bed_temperature = 60
 first_layer_temperature = 200
-full_fan_speed_layer = 0
+full_fan_speed_layer = 5
 max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 10
 slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
 temperature = 200
 
 [filament:Generic TPU @Zonestar]
@@ -349,7 +332,6 @@ bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60
@@ -375,7 +357,6 @@ max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 10
 slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
 temperature = 225
 
 ###################
@@ -417,7 +398,7 @@ machine_min_travel_rate = 0
 max_layer_height = 0.3
 min_layer_height = 0.1
 nozzle_diameter = 0.4
-pause_print_gcode = M601
+pause_print_gcode = 
 remaining_times = 0
 retract_speed = 40
 silent_mode = 0
@@ -446,9 +427,9 @@ max_layer_height = 0.3,0.3
 max_print_height = 220
 min_layer_height = 0.15,0.15
 nozzle_diameter = 0.4,0.4
-retract_before_travel = 2,2
-retract_before_wipe = 0%
-retract_layer_change = 0
+retract_before_travel = 6,6
+retract_before_wipe = 50%,50%
+retract_layer_change = 0,0
 retract_length = 10,10
 retract_length_toolchange = 0,0
 retract_lift = 0.5,0.5
@@ -456,10 +437,10 @@ retract_lift_above = 0,0
 retract_lift_below = 0,0
 retract_restart_extra = 0,0
 retract_restart_extra_toolchange = 0,0
-retract_speed = 35,35
-start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+retract_speed = 30,30
+start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
 use_relative_e_distances = 1
-wipe = 0,0
+wipe = 1,1
 
 
 [printer:Zonestar Z6]
@@ -478,18 +459,19 @@ max_layer_height = 0.3
 max_print_height = 150
 nozzle_diameter = 0.4
 retract_before_travel = 2
-retract_before_wipe = 0%
+retract_before_wipe = 30%
 retract_layer_change = 0
-retract_length = 6.5
+retract_length = 8
 retract_length_toolchange = 0
 retract_lift = 0
 retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 40
+retract_speed = 30
 start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000; lift nozzle\nG1 X5 Y5 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y100 E8 F600 ; prime nozzle\nG1 Y50 F5000 ; quick wipe\nG92 E0
 use_relative_e_distances = 0
+wipe = 1
 
 [printer:Zonestar Z5X]
 inherits = *common*
@@ -507,18 +489,19 @@ max_layer_height = 0.3
 max_print_height = 400
 nozzle_diameter = 0.4
 retract_before_travel = 2
-retract_before_wipe = 0%
+retract_before_wipe = 30%
 retract_layer_change = 0
-retract_length = 6.5
+retract_length = 8
 retract_length_toolchange = 0
 retract_lift = 0
 retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 40
+retract_speed = 30
 start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000; lift nozzle\nG1 X5 Y5 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y50 F5000 ; quick wipe\nG92 E0
 use_relative_e_distances = 0
+wipe = 1
 
 #Z8 with different types of hotend
 [printer:Zonestar Z8+M3 HOTEND]
@@ -537,20 +520,20 @@ max_layer_height = 0.3,0.3,0.3
 max_print_height = 400
 min_layer_height = 0.15,0.15,0.15
 nozzle_diameter = 0.4,0.4,0.4
-retract_before_travel = 2,2,2
-retract_before_wipe = 0%,0%,0%
+retract_before_travel = 6,6,6
+retract_before_wipe = 50%,50%,50%
 retract_layer_change = 0,0,0
-retract_length = 10,10,10
+retract_length = 12,12,12
 retract_length_toolchange = 0,0,0
 retract_lift = 0.5,0.5,0.5
 retract_lift_above = 0,0,0
 retract_lift_below = 0,0,0
 retract_restart_extra = 0,0,0
 retract_restart_extra_toolchange = 0,0,0
-retract_speed = 35,35,35
-start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+retract_speed = 30,30,30
+start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
 use_relative_e_distances = 1
-wipe = 0,0,0
+wipe = 1,1,1
 layer_gcode = G92 E0
 
 [printer:Zonestar Z8+M4 HOTEND]
@@ -569,20 +552,20 @@ max_layer_height = 0.3,0.3,0.3,0.3
 max_print_height = 400
 min_layer_height = 0.15,0.15,0.15,0.15
 nozzle_diameter = 0.4,0.4,0.4,0.4
-retract_before_travel = 2,2,2,2
-retract_before_wipe = 0%,0%,0%,0%
+retract_before_travel = 8,8,8,8
+retract_before_wipe = 50%,50%,50%,50%
 retract_layer_change = 0,0,0,0
-retract_length = 10,10,10,10
+retract_length = 12,12,12,12
 retract_length_toolchange = 0,0,0,0
-retract_lift = 0.5,0.5,0.5
+retract_lift = 0.5,0.5,0.5,0.5
 retract_lift_above = 0,0,0,0
 retract_lift_below = 0,0,0,0
 retract_restart_extra = 0,0,0,0
 retract_restart_extra_toolchange = 0,0,0,0
-retract_speed = 35,35,35,35
-start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+retract_speed = 30,30,30,30
+start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
 use_relative_e_distances = 1
-wipe = 0,0,0,0
+wipe = 1,1,1,1
 layer_gcode = G92 E0
 
 [printer:Zonestar Z8+E4 HOTEND]
@@ -594,28 +577,28 @@ default_filament_profile = Generic PLA @Zonestar
 default_print_profile = 0.20mm @Zonestar MULTI
 deretract_speed = 30,30,30,30
 before_layer_gcode = G92 E0
-end_gcode = G1 E-30 F2100 ;pull out filament\nG28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+end_gcode = G92 E0\nG1 E-45 F2100 ;pull out filament\nG28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
 extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
 extruder_offset = 0x0,0x0,0x0,0x0
 max_layer_height = 0.3,0.3,0.3,0.3
 max_print_height = 400
 min_layer_height = 0.1,0.1,0.1,0.1
 nozzle_diameter = 0.4,0.4,0.4,0.4
-retract_before_travel = 2,2,2,2
-retract_before_wipe = 0%,0%,0%,0%
+retract_before_travel = 4,4,4,4
+retract_before_wipe = 30%,30%,30%,30%
 retract_layer_change = 0,0,0,0
 retract_length = 8,8,8,8
 retract_length_toolchange = 0,0,0,0
-retract_lift = 0.5,0.5,0.5
+retract_lift = 0.5,0.5,0.5,0.5
 retract_lift_above = 0,0,0,0
 retract_lift_below = 0,0,0,0
 retract_restart_extra = 0,0,0,0
 retract_restart_extra_toolchange = 0,0,0,0
-retract_speed = 35,35,35,35
-start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
-toolchange_gcode = G92 E0\nG1 E-30 F1200;pull filament\nG92 E0\nT[next_extruder];Change extruder\nG92 E0\nG1 E15 F1800; push filament-1\nG1 E25 F900; pushfilament-2\nG1 E29 F1200; push filament-3\nG92 E0
+start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+retract_speed = 30,30,30,30
+toolchange_gcode = G92 E0\nG1 E-5 F1200;pull filament-1\nG92 E0\nG1 E-75 F2400;pull filament-2\nG92 E0\nT[next_extruder];Change extruder\nG92 E0\nG1 E25 F2400; push filament-1\nG92 E0\nG1 E20 F1200; pushfilament-2\nG92 E0\nG1 E30 F1800; pushfilament-2\nG92 E0\nG1 E4 F600; push filament-3\nG92 E0
 use_relative_e_distances = 1
-wipe = 0,0,0,0
+wipe = 1,1,1,1
 layer_gcode = G92 E0
 
 [printer:Zonestar Z8+DDE]
@@ -634,18 +617,49 @@ max_print_height = 400
 min_layer_height = 0.1
 nozzle_diameter = 0.4
 retract_before_travel = 2
-retract_before_wipe = 0%
+retract_before_wipe = 30%
 retract_layer_change = 0
-retract_length = 6.5
+retract_length = 8
 retract_length_toolchange = 0
 retract_lift = 0
 retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 40
+retract_speed = 30
 start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
 use_relative_e_distances = 0
+wipe = 1
+
+[printer:Zonestar Z8+One Color]
+inherits = *common*
+printer_model = Z8
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar SINGLE
+deretract_speed = 30
+end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #00FF00
+extruder_offset = 0x0
+max_layer_height = 0.3
+max_print_height = 400
+min_layer_height = 0.1
+nozzle_diameter = 0.4
+retract_before_travel = 4
+retract_before_wipe = 50%
+retract_layer_change = 0
+retract_length = 12
+retract_length_toolchange = 0
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\n;prime nozzle on the side of hotbed\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 0
+wipe = 1
 
 #Z9 with different types of hotend
 [printer:Zonestar Z9+M3 HOTEND]
@@ -664,20 +678,20 @@ max_layer_height = 0.3,0.3,0.3
 max_print_height = 400
 min_layer_height = 0.15,0.15,0.15
 nozzle_diameter = 0.4,0.4,0.4
-retract_before_travel = 2,2,2
-retract_before_wipe = 0%,0%,0%
+retract_before_travel = 6,6,6
+retract_before_wipe = 50%,50%,50%
 retract_layer_change = 0,0,0
-retract_length = 10,10,10
+retract_length = 12,12,12
 retract_length_toolchange = 0,0,0
 retract_lift = 0.5,0.5,0.5
 retract_lift_above = 0,0,0
 retract_lift_below = 0,0,0
 retract_restart_extra = 0,0,0
 retract_restart_extra_toolchange = 0,0,0
-retract_speed = 35,35,35
-start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+retract_speed = 30,30,30
+start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
 use_relative_e_distances = 1
-wipe = 0,0,0
+wipe = 1,1,1
 layer_gcode = G92 E0
 
 [printer:Zonestar Z9+M4 HOTEND]
@@ -696,20 +710,20 @@ max_layer_height = 0.3,0.3,0.3,0.3
 max_print_height = 400
 min_layer_height = 0.15,0.15,0.15,0.15
 nozzle_diameter = 0.4,0.4,0.4,0.4
-retract_before_travel = 2,2,2,2
-retract_before_wipe = 0%,0%,0%,0%
+retract_before_travel = 8,8,8,8
+retract_before_wipe = 50%,50%,50%,50%
 retract_layer_change = 0,0,0,0
-retract_length = 10,10,10,10
+retract_length = 12,12,12,12
 retract_length_toolchange = 0,0,0,0
-retract_lift = 0.5,0.5,0.5
+retract_lift = 0.5,0.5,0.5,0.5
 retract_lift_above = 0,0,0,0
 retract_lift_below = 0,0,0,0
 retract_restart_extra = 0,0,0,0
 retract_restart_extra_toolchange = 0,0,0,0
-retract_speed = 35,35,35,35
-start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+retract_speed = 30,30,30,30
+start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
 use_relative_e_distances = 1
-wipe = 0,0,0,0
+wipe = 1,1,1,1
 layer_gcode = G92 E0
 
 [printer:Zonestar Z9+E4 HOTEND]
@@ -721,28 +735,28 @@ default_filament_profile = Generic PLA @Zonestar
 default_print_profile = 0.20mm @Zonestar MULTI
 deretract_speed = 30,30,30,30
 before_layer_gcode = G92 E0
-end_gcode = G1 E-30 F2100 ;pull out filament\nG28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+end_gcode = G92 E0\nG1 E-45 F2100 ;pull out filament\nG28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
 extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
 extruder_offset = 0x0,0x0,0x0,0x0
 max_layer_height = 0.3,0.3,0.3,0.3
 max_print_height = 400
 min_layer_height = 0.1,0.1,0.1,0.1
 nozzle_diameter = 0.4,0.4,0.4,0.4
-retract_before_travel = 2,2,2,2
-retract_before_wipe = 0%,0%,0%,0%
+retract_before_travel = 4,4,4,4
+retract_before_wipe = 30%,30%,30%,30%
 retract_layer_change = 0,0,0,0
 retract_length = 8,8,8,8
 retract_length_toolchange = 0,0,0,0
-retract_lift = 0.5,0.5,0.5
+retract_lift = 0.5,0.5,0.5,0.5
 retract_lift_above = 0,0,0,0
 retract_lift_below = 0,0,0,0
 retract_restart_extra = 0,0,0,0
 retract_restart_extra_toolchange = 0,0,0,0
-retract_speed = 35,35,35,35
-start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
-toolchange_gcode = G92 E0\nG1 E-30 F1200;pull filament\nG92 E0\nT[next_extruder];Change extruder\nG92 E0\nG1 E15 F1800; push filament-1\nG1 E25 F900; pushfilament-2\nG1 E29 F1200; push filament-3\nG92 E0
+retract_speed = 30,30,30,30
+start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime start point\nG1 Z0.3 F3000 ; get ready to prime\n;===Pre-load filament start\nM117 Preload Extruder #1\nT0\nG0 X5 Y50 F3000\nG1 Y250 E15 F1200\nG0 X5.5 F3000\nG1 Y50 E15 F1200\nG0 X6 F3000\nG1 Y250 E15 F1200\nG0 X6.5 F3000\nG1 Y50 E15 F1200\nG0 X7 F3000\nG1 Y250 E15 F1200\nG0 X7.5 F3000\nG1 Y50 E15 F1200\nG0 X8 F3000\nG1 E-80 F2400\nM400\nM117 Preload Extruder #2\nT1\nG0 X8 Y50 F3000\nG1 Y250 E15 F1200\nG0 X8.5 F3000\nG1 Y50 E15 F1200\nG0 X9 F3000\nG1 Y250 E15 F1200\nG0 X9.5 F3000\nG1 Y50 E15 F1200\nG0 X10 F3000\nG1 Y250 E15 F1200\nG0 X10.5 F3000\nG1 Y50 E15 F1200\nG0 X11 F3000\nG1 E-80 F2400\nM400\nM117 Preload Extruder #3\nT2\nG0 X11 Y50 F3000\nG1 Y250 E15 F1200\nG0 X11.5 F3000\nG1 Y50 E15 F1200\nG0 X12 F3000\nG1 Y250 E15 F1200\nG0 X12.5 F3000\nG1 Y50 E15 F600\nG0 X13 F3000\nG1 Y250 E15 F1200\nG0 X13.5 F3000\nG1 Y50 E15 F1200\nG0 X14 F3000\nG1 E-80 F2400\nM400\nM117 Preload Extruder #3\nT3\nG0 X14 Y50 F3000\nG1 Y250 E15 F1200\nG0 X14.5 F3000\nG1 Y50 E15 F1200\nG0 X15 F3000\nG1 Y250 E15 F1200\nG0 X15.5 F3000\nG1 Y50 E15 F1200\nG0 X16 F3000\nG1 Y250 E15 F1200\nG0 X16.5 F3000\nG1 Y50 E15 F1200\nG0 X17 F3000\nG0 Y155 F4800\n;===Pre-load filament end
+toolchange_gcode = G92 E0\nG1 E-5 F1200;pull filament-1\nG92 E0\nG1 E-75 F2400;pull filament-2\nG92 E0\nT[next_extruder];Change extruder\nG92 E0\nG1 E25 F2400; push filament-1\nG92 E0\nG1 E20 F1200; pushfilament-2\nG92 E0\nG1 E30 F1800; pushfilament-2\nG92 E0\nG1 E4 F600; push filament-3\nG92 E0
 use_relative_e_distances = 1
-wipe = 0,0,0,0
+wipe = 1,1,1,1
 layer_gcode = G92 E0
 
 [printer:Zonestar Z9+DDE]
@@ -761,15 +775,46 @@ max_print_height = 400
 min_layer_height = 0.1
 nozzle_diameter = 0.4
 retract_before_travel = 2
-retract_before_wipe = 0%
+retract_before_wipe = 30%
 retract_layer_change = 0
-retract_length = 6.5
+retract_length = 8
 retract_length_toolchange = 0
 retract_lift = 0
 retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 40
+retract_speed = 30
 start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
 use_relative_e_distances = 0
+wipe = 1
+
+[printer:Zonestar Z9+One Color]
+inherits = *common*
+printer_model = Z9
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar SINGLE
+deretract_speed = 30
+end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #00FF00
+extruder_offset = 0x0
+max_layer_height = 0.3
+max_print_height = 400
+min_layer_height = 0.1
+nozzle_diameter = 0.4
+retract_before_travel = 4
+retract_before_wipe = 50%
+retract_layer_change = 0
+retract_length = 12
+retract_length_toolchange = 0
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = M104 S{first_layer_temperature+extruder_temperature_offset} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature+extruder_temperature_offset} ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\n;prime nozzle on the side of hotbed\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 0
+wipe = 1
diff --git a/Zonestar/150_texture.svg b/Zonestar/150_texture.svg
new file mode 100644
index 0000000..32e4ec4
--- /dev/null
+++ b/Zonestar/150_texture.svg
@@ -0,0 +1,142 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   width="150mm"
+   height="150mm"
+   viewBox="0 0 150 150"
+   version="1.1"
+   id="svg8">
+  <defs
+     id="defs2" />
+  <metadata
+     id="metadata5">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     id="layer1">
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="m 89.999999,0 v 150 0 0"
+       id="path867" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 100,150 V 0"
+       id="path869" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 110,0 V 150"
+       id="path871" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 120,150 V 0"
+       id="path873" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 130,0 V 150"
+       id="path875" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 140,150 V 0"
+       id="path877" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 79.999998,0 V 150"
+       id="path879" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 69.999999,150 V 0"
+       id="path881" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 59.999998,0 V 150"
+       id="path883" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 50,150 V 0"
+       id="path885" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 39.999999,0 V 150"
+       id="path887" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 30,150 V 0"
+       id="path889" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 20,0 V 150"
+       id="path891" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 10,150 V 0"
+       id="path893" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,10 H 150"
+       id="path895" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 150,20 H 0"
+       id="path897" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,30 H 150"
+       id="path899" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 150,39.999999 H 0"
+       id="path901" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,50 H 150"
+       id="path903" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 150,59.999998 H 0"
+       id="path905" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,69.999999 H 150"
+       id="path907" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 150,79.999998 H 0"
+       id="path909" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,89.999999 H 150"
+       id="path911" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 150,100 H 0"
+       id="path913" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,110 H 150"
+       id="path915" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 150,120 H 0"
+       id="path917" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,130 H 150"
+       id="path919" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 150,140 H 0"
+       id="path921" />
+  </g>
+</svg>
diff --git a/Zonestar/220_texture.svg b/Zonestar/220_texture.svg
new file mode 100644
index 0000000..079e498
--- /dev/null
+++ b/Zonestar/220_texture.svg
@@ -0,0 +1,198 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   width="220mm"
+   height="220mm"
+   viewBox="0 0 220 220"
+   version="1.1"
+   id="svg929">
+  <defs
+     id="defs923" />
+  <metadata
+     id="metadata926">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     id="layer1">
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 10,0 V 220"
+       id="path1494" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 20,220 V 0"
+       id="path1496" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 30,0 V 220"
+       id="path1498" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 39.999999,220 V 0"
+       id="path1500" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 50,0 V 220"
+       id="path1502" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 59.999998,220 V 0"
+       id="path1504" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 69.999999,0 V 220"
+       id="path1506" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 79.999998,220 V 0"
+       id="path1508" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 89.999999,0 V 220"
+       id="path1510" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 100,220 V 0"
+       id="path1512" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 110,0 V 220"
+       id="path1514" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 120,220 V 0"
+       id="path1516" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 130,0 V 220"
+       id="path1518" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 140,220 V 0"
+       id="path1520" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 150,0 V 220"
+       id="path1522" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 160,220 V 0"
+       id="path1524" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 170,0 V 220"
+       id="path1526" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 180,220 V 0"
+       id="path1528" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 190,0 V 220"
+       id="path1530" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 200,220 V 0"
+       id="path1532" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 210,0 V 220"
+       id="path1534" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,210 H 0"
+       id="path1536" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,200 H 0"
+       id="path1538" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,190 H 220"
+       id="path1540" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,180 H 0"
+       id="path1542" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,170 H 220"
+       id="path1544" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,160 H 0"
+       id="path1546" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,150 H 220"
+       id="path1548" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,140 H 0"
+       id="path1550" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,130 H 220"
+       id="path1552" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,120 H 0"
+       id="path1554" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,110 H 220"
+       id="path1556" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,100 H 0"
+       id="path1558" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,89.999999 H 220"
+       id="path1560" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,79.999998 H 0"
+       id="path1562" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,69.999999 H 220"
+       id="path1564" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,59.999998 H 0"
+       id="path1566" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,50 H 220"
+       id="path1568" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,39.999999 H 0"
+       id="path1570" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,30 H 220"
+       id="path1572" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,20 H 0"
+       id="path1574" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,10 H 220"
+       id="path1576" />
+  </g>
+</svg>
diff --git a/Zonestar/310_texture.svg b/Zonestar/310_texture.svg
new file mode 100644
index 0000000..1d60390
--- /dev/null
+++ b/Zonestar/310_texture.svg
@@ -0,0 +1,270 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   xmlns:dc="http://purl.org/dc/elements/1.1/"
+   xmlns:cc="http://creativecommons.org/ns#"
+   xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
+   xmlns:svg="http://www.w3.org/2000/svg"
+   xmlns="http://www.w3.org/2000/svg"
+   width="310mm"
+   height="310mm"
+   viewBox="0 0 310 310"
+   version="1.1"
+   id="svg1584">
+  <defs
+     id="defs1578" />
+  <metadata
+     id="metadata1581">
+    <rdf:RDF>
+      <cc:Work
+         rdf:about="">
+        <dc:format>image/svg+xml</dc:format>
+        <dc:type
+           rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
+        <dc:title></dc:title>
+      </cc:Work>
+    </rdf:RDF>
+  </metadata>
+  <g
+     id="layer1">
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 10,0 V 309.99998"
+       id="path2149" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 20,309.99998 V 0"
+       id="path2151" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 30,0 V 309.99998"
+       id="path2153" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 39.999999,309.99998 V 0"
+       id="path2155" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 50,0 V 309.99998"
+       id="path2157" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 59.999998,309.99998 V 0 0 0"
+       id="path2159" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 69.999999,0 V 309.99998"
+       id="path2161" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 79.999998,309.99998 V 0"
+       id="path2163" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 89.999999,0 V 309.99998"
+       id="path2165" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 100,309.99998 V 0"
+       id="path2167" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 110,0 V 309.99998"
+       id="path2169" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 120,309.99998 V 0"
+       id="path2171" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 130,0 V 309.99998"
+       id="path2173" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 140,309.99998 V 0"
+       id="path2175" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 150,0 V 309.99998"
+       id="path2177" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 160,309.99998 V 0"
+       id="path2179" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 170,0 V 309.99998"
+       id="path2181" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 180,309.99998 V 0"
+       id="path2183" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 190,0 V 309.99998"
+       id="path2185" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 200,309.99998 V 0"
+       id="path2187" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 210,0 V 309.99998"
+       id="path2189" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 220,309.99998 V 0"
+       id="path2191" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 230,0 V 309.99998"
+       id="path2193" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 240,309.99998 V 0"
+       id="path2195" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 250,0 V 309.99998"
+       id="path2197" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 260,309.99998 V 0"
+       id="path2199" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 269.99999,0 V 309.99998"
+       id="path2201" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 279.99999,309.99998 V 0"
+       id="path2203" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 290,0 V 309.99998"
+       id="path2205" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 300,309.99998 V 0"
+       id="path2207" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,10 H 309.99998"
+       id="path2209" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,20 H 0"
+       id="path2211" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,30 H 309.99998"
+       id="path2213" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,39.999999 H 0"
+       id="path2215" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,50 H 309.99998"
+       id="path2217" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,59.999998 H 0"
+       id="path2219" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,69.999999 H 309.99998"
+       id="path2221" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,79.999998 H 0"
+       id="path2223" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,89.999999 H 309.99998"
+       id="path2225" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,100 H 0"
+       id="path2227" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,110 H 309.99998"
+       id="path2229" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,120 H 0"
+       id="path2231" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,130 H 309.99998"
+       id="path2233" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,140 H 0"
+       id="path2235" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,150 H 309.99998"
+       id="path2237" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,160 H 0"
+       id="path2239" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,170 H 309.99998"
+       id="path2241" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,180 H 0"
+       id="path2243" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,190 H 309.99998"
+       id="path2245" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,200 H 0"
+       id="path2247" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,210 H 309.99998"
+       id="path2249" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,220 H 0"
+       id="path2251" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,230 H 309.99998"
+       id="path2253" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,240 H 0"
+       id="path2255" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,250 H 309.99998"
+       id="path2257" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,260 H 0"
+       id="path2259" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,269.99999 H 309.99998"
+       id="path2261" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,279.99999 H 0"
+       id="path2263" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 0,290 H 309.99998"
+       id="path2265" />
+    <path
+       style="fill:none;stroke:#000000;stroke-width:0.264583px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
+       d="M 309.99998,300 H 0"
+       id="path2267" />
+  </g>
+</svg>
diff --git a/Zonestar/bedtexture.png b/Zonestar/bedtexture.png
deleted file mode 100644
index e3ef614..0000000
--- a/Zonestar/bedtexture.png
+++ /dev/null