merge prusa 2.3.1 profiles

1 files changed, 523 insertions, 105 deletions

diff --git a/Creality.ini b/Creality.ini
index 7064c8f..cbf448e 100644
--- a/Creality.ini
+++ b/Creality.ini
@@ -5,7 +5,7 @@
 name = Creality
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.12-susi
+config_version = 0.0.15
 # Where to get the updates from?
 config_update_url = 
 # https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
@@ -26,25 +26,43 @@ technology = FFF
 family = ENDER
 bed_model = ender3_bed.stl
 bed_texture = ender3.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
-[printer_model:ENDER3V2]
-name = Creality Ender-3V2
-variants = 0.4
+[printer_model:ENDER3BLTOUCH]
+name = Creality Ender-3 BLTouch
+variants = 0.4; 0.3; 0.5; 0.6; 0.4 manual MMU
 technology = FFF
 family = ENDER
 bed_model = ender3_bed.stl
 bed_texture = ender3.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
-[printer_model:ENDER3BLTOUCH]
-name = Creality Ender-3 BLTouch
+[printer_model:ENDER3V2]
+name = Creality Ender-3 V2
 variants = 0.4; 0.3; 0.5; 0.6
 technology = FFF
 family = ENDER
-bed_model = ender3_bed.stl
-bed_texture = ender3.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+bed_model = ender3v2_bed.stl
+bed_texture = ender3v2.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:ENDER3MAX]
+name = Creality Ender-3 Max
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = ENDER
+bed_model = cr10v2_bed.stl
+bed_texture = cr10spro.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:ENDER4]
+name = Creality Ender-4
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = ENDER
+bed_model = ender3v2_bed.stl
+bed_texture = ender3v2.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER5]
 name = Creality Ender-5
@@ -53,7 +71,7 @@ technology = FFF
 family = ENDER
 bed_model = ender3_bed.stl
 bed_texture = ender3.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER5PLUS]
 name = Creality Ender-5 Plus
@@ -62,7 +80,16 @@ technology = FFF
 family = ENDER
 bed_model = ender5plus_bed.stl
 bed_texture = ender5plus.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:ENDER6]
+name = Creality Ender-6
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = ENDER
+bed_model = ender6_bed.stl
+bed_texture = ender6.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:ENDER2]
 name = Creality Ender-2
@@ -71,7 +98,43 @@ technology = FFF
 family = ENDER
 bed_model = ender2_bed.stl
 bed_texture = ender2.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR5PRO]
+name = Creality CR-5 Pro
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = CR
+bed_model = cr5pro_bed.stl
+bed_texture = cr5pro.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR5PROH]
+name = Creality CR-5 Pro H
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = CR
+bed_model = cr5pro_bed.stl
+bed_texture = cr5pro.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR6SE]
+name = Creality CR-6 SE
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = CR
+bed_model = cr6se_bed.stl
+bed_texture = cr6se.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR6MAX]
+name = Creality CR-6 Max
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = CR
+bed_model = cr10s4_bed.stl
+bed_texture = cr10s4.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10MINI]
 name = Creality CR-10 Mini
@@ -80,7 +143,16 @@ technology = FFF
 family = CR10
 bed_model = cr10mini_bed.stl
 bed_texture = cr10mini.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR10MAX]
+name = Creality CR-10 Max
+variants = 0.4; 0.6; 0.8
+technology = FFF
+family = CR
+bed_model = cr10max_bed.stl
+bed_texture = cr10max.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10]
 name = Creality CR-10
@@ -89,7 +161,7 @@ technology = FFF
 family = CR10
 bed_model = cr10_bed.stl
 bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10V2]
 name = Creality CR-10 V2
@@ -98,7 +170,7 @@ technology = FFF
 family = CR10
 bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10V3]
 name = Creality CR-10 V3
@@ -107,7 +179,7 @@ technology = FFF
 family = CR10
 bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10S]
 name = Creality CR-10 S
@@ -116,7 +188,7 @@ technology = FFF
 family = CR10
 bed_model = cr10_bed.stl
 bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10SPRO]
 name = Creality CR-10 S Pro
@@ -124,8 +196,8 @@ variants = 0.4; 0.6; 0.8
 technology = FFF
 family = CR10
 bed_model = cr10v2_bed.stl
-bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+bed_texture = cr10spro.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10SPROV2]
 name = Creality CR-10 S Pro V2
@@ -134,7 +206,7 @@ technology = FFF
 family = CR10
 bed_model = cr10v2_bed.stl
 bed_texture = cr10.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10S4]
 name = Creality CR-10 S4
@@ -143,7 +215,7 @@ technology = FFF
 family = CR10 XL
 bed_model = cr10s4_bed.stl
 bed_texture = cr10s4.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR10S5]
 name = Creality CR-10 S5
@@ -152,7 +224,7 @@ technology = FFF
 family = CR10 XL
 bed_model = cr10s5_bed.stl
 bed_texture = cr10s5.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR20]
 name = Creality CR-20
@@ -161,7 +233,7 @@ technology = FFF
 family = CR20
 bed_model = ender3_bed.stl
 bed_texture = cr20.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 [printer_model:CR20PRO]
 name = Creality CR-20 Pro
@@ -170,7 +242,43 @@ technology = FFF
 family = CR20
 bed_model = ender3_bed.stl
 bed_texture = cr20.svg
-default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR200B]
+name = Creality CR-200B
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = CR
+bed_model = cr200b_bed.stl
+bed_texture = cr200b.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+[printer_model:CR8]
+name = Creality CR-8
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = CR
+bed_model = cr8_bed.stl
+bed_texture = cr8.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+#[printer_model:CRX]
+#name = Creality CR-X
+#variants = 0.4
+#technology = FFF
+#family = CR-X
+#bed_model = cr10v2_bed.stl
+#bed_texture = cr10spro.svg
+#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
+
+#[printer_model:CRXPRO]
+#name = Creality CR-X Pro
+#variants = 0.4
+#technology = FFF
+#family = CR-X
+#bed_model = cr10v2_bed.stl
+#bed_texture = cr10spro.svg
+#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA (Galaxy) @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY
 
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
@@ -179,6 +287,7 @@ default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG
 [print:*common*]
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilineargapfill
+bridge_acceleration = 250
 bridge_angle = 0
 bridge_flow_ratio = 95%
 bridge_speed = 25
@@ -186,15 +295,16 @@ brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
 complete_objects = 0
+default_acceleration = 500
 dont_support_bridges = 1
 ensure_vertical_shell_thickness = 1
 external_perimeters_first = 0
 external_perimeter_speed = 25
 extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 fill_top_flow_ratio = 100%
 first_layer_height = 0.2
@@ -230,10 +340,10 @@ print_settings_id =
 raft_layers = 0
 seam_position = near
 seam_travel_cost = 20%
+single_extruder_multi_material_priming = 0
 skirts = 1
-skirt_distance = 2
+skirt_distance = 3
 skirt_height = 2
-single_extruder_multi_material_priming = 0
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -260,7 +370,7 @@ support_material_solid_first_layer = 1
 support_material_spacing = 2
 support_material_speed = 40
 support_material_synchronize_layers = 0
-support_material_threshold = 45
+support_material_threshold = 40
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_perimeters = 1
@@ -277,21 +387,38 @@ wipe_tower_width = 60
 wipe_tower_x = 160
 wipe_tower_y = 160
 xy_size_compensation = 0
-extrusion_width = 110%
-external_perimeter_extrusion_width = 105%
-first_layer_extrusion_width = 140%
-infill_extrusion_width = 110%
-perimeter_extrusion_width = 110%
-solid_infill_extrusion_width = 110%
-top_infill_extrusion_width = 100%
+extrusion_width = 
+perimeter_extrusion_width = 
+external_perimeter_extrusion_width = 
+first_layer_extrusion_width = 
+infill_extrusion_width = 
+solid_infill_extrusion_width = 
+top_infill_extrusion_width = 
+skirt_extrusion_width = 120%
 support_material_extrusion_width = 95%
+extrusion_spacing = 100%
+perimeter_extrusion_spacing = 105%
+external_perimeter_extrusion_spacing = 100%
+first_layer_extrusion_spacing = 130%
+infill_extrusion_spacing = 100%
+solid_infill_extrusion_spacing = 105%
+top_infill_extrusion_spacing = 100%
 
 [print:*0.08mm*]
 inherits = *common*
 layer_height = 0.08
 perimeters = 3
+bottom_solid_layers = 9
+top_solid_layers = 11
+bridge_flow_ratio = 0.70
+
+[print:*0.10mm*]
+inherits = *common*
+layer_height = 0.10
+perimeters = 3
 bottom_solid_layers = 7
 top_solid_layers = 9
+bridge_flow_ratio = 0.70
 
 [print:*0.12mm*]
 inherits = *common*
@@ -299,12 +426,14 @@ layer_height = 0.12
 perimeters = 3
 bottom_solid_layers = 6
 top_solid_layers = 7
+bridge_flow_ratio = 0.70
 
 [print:*0.16mm*]
 inherits = *common*
 layer_height = 0.16
 bottom_solid_layers = 5
 top_solid_layers = 7
+bridge_flow_ratio = 0.85
 
 [print:*0.20mm*]
 inherits = *common*
@@ -337,27 +466,43 @@ top_solid_layers = 4
 inherits = *0.08mm*
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
+[print:0.10mm HIGHDETAIL @CREALITY]
+inherits = *0.10mm*
+renamed_from = "0.10mm HIGHDETAIL @ENDER3"
+compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
+
 [print:0.12mm DETAIL @CREALITY]
 inherits = *0.12mm*
+renamed_from = "0.12mm DETAIL @ENDER3"
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
 [print:0.16mm OPTIMAL @CREALITY]
 inherits = *0.16mm*
+renamed_from = "0.15mm OPTIMAL @ENDER3"; "0.15mm OPTIMAL @CREALITY"
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
 [print:0.20mm NORMAL @CREALITY]
 inherits = *0.20mm*
+renamed_from = "0.20mm NORMAL @ENDER3"
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
 [print:0.24mm DRAFT @CREALITY]
 inherits = *0.24mm*
+renamed_from = "0.24mm DRAFT @ENDER3"
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
 [print:0.28mm SUPERDRAFT @CREALITY]
 inherits = *0.28mm*
 compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4
 
-# Common filament preset
+# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
+#   https://www.thingiverse.com/thing:2615842
+# Pay particular attention to bridging, overhangs and retractions.
+# Also print the following bed adhesion test at 0.1 layer height as well:
+#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
+# At least for PLA, please keep bed temp at 60, as many Creality printers do not have any ABL
+# So having some leeway to get good bed adhesion is not a luxury for many users
+
 [filament:*common*]
 cooling = 0
 compatible_printers = 
@@ -548,6 +693,17 @@ filament_density = 1.3
 filament_colour = #3C4547
 filament_spool_weight = 256
 
+[filament:Extrudr GreenTEC Pro @CREALITY]
+inherits = *PLA*
+filament_vendor = Extrudr
+temperature = 210
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 56.24
+filament_density = 1.35
+filament_colour = #3C4547
+
 [filament:Real Filament PLA @CREALITY]
 inherits = *PLA*
 filament_vendor = Real Filament
@@ -582,6 +738,28 @@ filament_density = 1.24
 filament_colour = #125467
 filament_spool_weight = 238
 
+[filament:3DJAKE ecoPLA Tough @CREALITY]
+inherits = *PLA*
+filament_vendor = 3DJAKE
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 29.99
+filament_density = 1.21
+filament_colour = #125467
+
+[filament:FormFutura Tough PLA @CREALITY]
+inherits = *PLA*
+filament_vendor = FormFutura
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 46.65
+filament_density = 1.21
+filament_colour = #ed000e
+
 [filament:123-3D Jupiter PLA @CREALITY]
 inherits = *PLA*
 filament_vendor = 123-3D
@@ -596,12 +774,13 @@ filament_colour = #FFE200
 [filament:Das Filament PLA @CREALITY]
 inherits = *PLA*
 filament_vendor = Das Filament
-temperature = 215
-bed_temperature = 50
+temperature = 210
+bed_temperature = 60
 first_layer_temperature = 215
-first_layer_bed_temperature = 50
+first_layer_bed_temperature = 60
 filament_cost = 20.56
 filament_density = 1.24
+filament_colour = #C7F935
 
 [filament:Das Filament PETG @CREALITY]
 inherits = *PET*
@@ -612,6 +791,7 @@ first_layer_temperature = 240
 first_layer_bed_temperature = 70
 filament_cost = 27.44
 filament_density = 1.29
+filament_colour = #C7F935
 
 # Common printer preset
 [printer:*common*]
@@ -619,8 +799,8 @@ printer_technology = FFF
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
 between_objects_gcode = 
 pause_print_gcode = 
-deretract_speed = 0
-extruder_colour = #FFFF00
+deretract_speed = 40
+extruder_colour = #FCE94F
 extruder_offset = 0x0
 gcode_flavor = marlin
 silent_mode = 0
@@ -642,23 +822,23 @@ machine_max_jerk_z = 0.4
 machine_min_extruding_rate = 0
 machine_min_travel_rate = 0
 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.3
-min_layer_height = 0.07
+max_layer_height = 0.28
+min_layer_height = 0.08
 max_print_height = 250
 nozzle_diameter = 0.4
 printer_notes = 
 printer_settings_id = 
-retract_before_travel = 1
-retract_before_wipe = 0%
+retract_before_travel = 2
+retract_before_wipe = 70%
 retract_layer_change = 1
-retract_length = 1
+retract_length = 5
 retract_length_toolchange = 1
 retract_lift = 0
 retract_lift_above = 0
 retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 35
+retract_speed = 60
 single_extruder_multi_material = 0
 toolchange_gcode = 
 use_firmware_retraction = 0
@@ -671,8 +851,50 @@ z_step = 0.04
 printer_model = 
 default_print_profile = 0.16mm OPTIMAL @CREALITY
 default_filament_profile = Generic PLA @CREALITY
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E15.0 F1200.0 ; intro line\nG92 E0.0
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+
+# Intended for printers with a smaller bed, like the Ender-3 series
+[printer:*fastabl*]
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+
+# Intended for printers with a larger bed, like the CR-10 series
+[printer:*slowabl*]
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+
+# Intended for printers with vendor official firmware verified to support M25
+[printer:*pauseprint*]
+pause_print_gcode = M25 ; pause print
+
+# Intended for printers where the Z-axis lowers the print bed during printing, like the Ender-5 series
+[printer:*descendingz*]
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; move print head out of the way\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed close to the bottom\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+
+# Intended for printers with dual extruders and a single hotend/nozzle, like the CR-X series
+[printer:*dualextruder*]
+single_extruder_multi_material = 1
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+extra_loading_move = -2
+parking_pos_retraction = 92
+deretract_speed = 40,40
+extruder_colour = #FCE94F;#729FCF
+extruder_offset = 0x0,0x0
+max_layer_height = 0.28,0.28
+min_layer_height = 0.08,0.08
+nozzle_diameter = 0.4,0.4
+retract_before_travel = 2,2
+retract_before_wipe = 70%,70%
+retract_layer_change = 1,1
+retract_length = 5,5
+retract_length_toolchange = 1,1
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 60,60
+wipe = 1,1
 
 [printer:*SmallBowden*]
 inherits = *common*
@@ -741,32 +963,36 @@ min_layer_height = 0.08
 printer_variant = 0.8
 default_print_profile = 0.32mm NORMAL 0.8 nozzle
 
-[printer:*Creality Ender-3*]
-inherits = *SmallBowden*
-printer_model = ENDER3
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN
-bed_shape = 3x3,228x3,228x228,3x228
-max_print_height = 250
-
 
-[printer:Creality Ender-3]
-inherits = *Creality Ender-3*; *0.4nozzle*
-
-[printer:Creality Ender-3 0.4mm (manual MMU)]
-inherits = *Creality Ender-3*; *0.4nozzle*
+[printer:*manual MMU*]
 printer_variant = 0.4 manual MMU
 nozzle_diameter = 0.4,0.4,0.4
-retract_speed = 80
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
 default_print_profile = 0.16mm NORMAL 0.4 nozzle
-default_filament_profile = Creality PLA
 single_extruder_multi_material = 1
 toolchange_gcode = M104 S{temperature[next_extruder]}\n{if layer_num > -1}M600{endif}
 retract_layer_change = 0
+retract_speed = 80
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 parking_pos_retraction = 200
 cooling_tube_length = 10
 cooling_tube_retraction = 100
+use_relative_e_distances = 1
+
+[printer:*Creality Ender-3*]
+inherits = *SmallBowden*
+bed_shape = 3x3,228x3,228x228,3x228
+max_print_height = 250
+printer_model = ENDER3
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN
+
+
+[printer:Creality Ender-3]
+inherits = *Creality Ender-3*; *0.4nozzle*
+
+[printer:Creality Ender-3 0.4mm (manual MMU)]
+inherits = *Creality Ender-3*; *0.4nozzle*;*manual MMU*
 
 [printer:Creality Ender-3 0.3mm]
 inherits = *Creality Ender-3*; *0.3nozzle*
@@ -777,29 +1003,16 @@ inherits = *Creality Ender-3*; *0.5nozzle*
 [printer:Creality Ender-3 0.6mm]
 inherits = *Creality Ender-3*; *0.6nozzle*
 
-[printer:Creality Ender-3V2]
-inherits = Creality Ender-3
-printer_model = ENDER3V2
-printer_variant = 0.4
-bed_shape = 0x0,220x0,220x220,0x220
-
-[printer:*fastabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
-
-[printer:*slowabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0
-
-[printer:*invertedz*]
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed down further down\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
-
 [printer:*Creality Ender-3 BLTouch*]
 inherits = *SmallBowden*; *fastabl*
 printer_model = ENDER3BLTOUCH
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN
 
 [printer:Creality Ender-3 BLTouch 0.4mm]
 inherits = *Creality Ender-3 BLTouch*; *0.4nozzle*
 
+[printer:Creality Ender-3 BLTouch 0.4mm (manual MMU)]
+inherits = *Creality Ender-3 BLTouch*; *0.4nozzle*;*manual MMU*
+
 [printer:Creality Ender-3 BLTouch 0.3mm]
 inherits = *Creality Ender-3 BLTouch*; *0.3nozzle*
 
@@ -809,13 +1022,72 @@ inherits = *Creality Ender-3 BLTouch*; *0.5nozzle*
 [printer:Creality Ender-3 BLTouch 0.6mm]
 inherits = *Creality Ender-3 BLTouch*; *0.6nozzle*
 
+[printer:*Creality Ender-3 V2*]
+inherits = *common*
+bed_shape = 5x0,215x0,215x220,5x220
+max_print_height = 250
+printer_model = ENDER3V2
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3V2\nPRINTER_HAS_BOWDEN
+
+[printer:Creality Ender-3 V2]
+inherits = *Creality Ender-3 V2*; *0.4nozzle*
+renamed_from = "Creality Ender-3V2"
+
+[printer:Creality Ender-3 V2 0.3mm]
+inherits = *Creality Ender-3 V2*; *0.3nozzle*
+
+[printer:Creality Ender-3 V2 0.5mm]
+inherits = *Creality Ender-3 V2*; *0.5nozzle*
+
+[printer:Creality Ender-3 V2 0.6mm]
+inherits = *Creality Ender-3 V2*; *0.6nozzle*
+
+[printer:*Creality Ender-3 Max*]
+inherits = *common*
+retract_length = 6
+bed_shape = 5x5,295x5,295x295,5x295
+max_print_height = 340
+printer_model = ENDER3MAX
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3MAX\nPRINTER_HAS_BOWDEN
+
+[printer:Creality Ender-3 Max]
+inherits = *Creality Ender-3 Max*; *0.4nozzle*
+
+[printer:Creality Ender-3 Max 0.3mm]
+inherits = *Creality Ender-3 Max*; *0.3nozzle*
+
+[printer:Creality Ender-3 Max 0.5mm]
+inherits = *Creality Ender-3 Max*; *0.5nozzle*
+
+[printer:Creality Ender-3 Max 0.6mm]
+inherits = *Creality Ender-3 Max*; *0.6nozzle*
+
+[printer:*Creality Ender-4*]
+inherits = *common*; *descendingz*
+bed_shape = 5x0,215x0,215x220,5x220
+max_print_height = 300
+printer_model = ENDER4
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER4\nPRINTER_HAS_BOWDEN
+
+[printer:Creality Ender-4]
+inherits = *Creality Ender-4*; *0.4nozzle*
+
+[printer:Creality Ender-4 0.3mm]
+inherits = *Creality Ender-4*; *0.3nozzle*
+
+[printer:Creality Ender-4 0.5mm]
+inherits = *Creality Ender-4*; *0.5nozzle*
+
+[printer:Creality Ender-4 0.6mm]
+inherits = *Creality Ender-4*; *0.6nozzle*
+
 [printer:*Creality Ender-5*]
-inherits = *SmallBowden*; *invertedz*
+inherits = *SmallBowden*; *descendingz*
 retract_length = 6
 bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
+max_print_height = 300
 printer_model = ENDER5
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5\nPRINTER_HAS_BOWDEN
-max_print_height = 300
 machine_max_acceleration_e = 1000
 machine_max_feedrate_z = 5
 
@@ -832,12 +1104,12 @@ inherits = *Creality Ender-5*; *0.5nozzle*
 inherits = *Creality Ender-5*; *0.6nozzle*
 
 [printer:*Creality Ender-5 Plus*]
-inherits = *SmallBowden*; *slowabl*; *invertedz*
+inherits = *SmallBowden*; *slowabl*; *descendingz*
 retract_length = 6
 bed_shape = 5x5,355x5,355x355,5x355
+max_print_height = 400
 printer_model = ENDER5PLUS
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5PLUS\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 machine_max_acceleration_e = 1000
 machine_max_feedrate_z = 5
 machine_max_feedrate_x = 300
@@ -855,14 +1127,31 @@ inherits = *Creality Ender-5 Plus*; *0.5nozzle*
 [printer:Creality Ender-5 Plus 0.6mm]
 inherits = *Creality Ender-5 Plus*; *0.6nozzle*
 
+[printer:*Creality Ender-6*]
+inherits = *common*; *descendingz*
+bed_shape = 5x5,255x5,255x255,5x255
+max_print_height = 400
+printer_model = ENDER6
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER6\nPRINTER_HAS_BOWDEN
+
+[printer:Creality Ender-6 0.4mm]
+inherits = *Creality Ender-6*; *0.4nozzle*
+
+[printer:Creality Ender-6 0.3mm]
+inherits = *Creality Ender-6*; *0.3nozzle*
+
+[printer:Creality Ender-6 0.5mm]
+inherits = *Creality Ender-6*; *0.5nozzle*
+
+[printer:Creality Ender-6 0.6mm]
+inherits = *Creality Ender-6*; *0.6nozzle*
+
 [printer:*Creality Ender-2*]
 inherits = *SmallBowden*
 bed_shape = 0x0,150x0,150x150,0x150
+max_print_height = 200
 printer_model = ENDER2
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER2\nPRINTER_HAS_BOWDEN
-max_print_height = 200
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 X15 Y135 E15 F1500 ; intro line\nG1 X2.3 F5000\nG1 Y10 E15 F1200 ; intro line\nG92 E0
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y140 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+30, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
 
 [printer:Creality Ender-2 0.4mm]
 inherits = *Creality Ender-2*; *0.4nozzle*
@@ -877,13 +1166,91 @@ inherits = *Creality Ender-2*; *0.5nozzle*
 [printer:Creality Ender-2 0.6mm]
 inherits = *Creality Ender-2*; *0.6nozzle*
 
+[printer:*Creality CR-5 Pro*]
+inherits = *common*; *slowabl*; *descendingz*
+retract_length = 6
+bed_shape = 5x5,295x5,295x220,5x220
+max_print_height = 380
+printer_model = CR5PRO
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR5PRO\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-5 Pro 0.4mm]
+inherits = *Creality CR-5 Pro*; *0.4nozzle*
+
+[printer:Creality CR-5 Pro 0.3mm]
+inherits = *Creality CR-5 Pro*; *0.3nozzle*
+
+[printer:Creality CR-5 Pro 0.5mm]
+inherits = *Creality CR-5 Pro*; *0.5nozzle*
+
+[printer:Creality CR-5 Pro 0.6mm]
+inherits = *Creality CR-5 Pro*; *0.6nozzle*
+
+[printer:*Creality CR-5 Pro H*]
+inherits = *common*; *slowabl*; *descendingz*
+retract_length = 3
+bed_shape = 5x5,295x5,295x220,5x220
+max_print_height = 380
+printer_model = CR5PROH
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR5PROH\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-5 Pro H 0.4mm]
+inherits = *Creality CR-5 Pro H*; *0.4nozzle*
+
+[printer:Creality CR-5 Pro H 0.3mm]
+inherits = *Creality CR-5 Pro H*; *0.3nozzle*
+
+[printer:Creality CR-5 Pro H 0.5mm]
+inherits = *Creality CR-5 Pro H*; *0.5nozzle*
+
+[printer:Creality CR-5 Pro H 0.6mm]
+inherits = *Creality CR-5 Pro H*; *0.6nozzle*
+
+[printer:*Creality CR-6 SE*]
+inherits = *common*; *fastabl*; *pauseprint*
+bed_shape = 5x0,230x0,230x235,5x235
+printer_model = CR6SE
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR6SE\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-6 SE 0.4mm]
+inherits = *Creality CR-6 SE*; *0.4nozzle*
+
+[printer:Creality CR-6 SE 0.3mm]
+inherits = *Creality CR-6 SE*; *0.3nozzle*
+
+[printer:Creality CR-6 SE 0.5mm]
+inherits = *Creality CR-6 SE*; *0.5nozzle*
+
+[printer:Creality CR-6 SE 0.6mm]
+inherits = *Creality CR-6 SE*; *0.6nozzle*
+
+[printer:*Creality CR-6 Max*]
+inherits = *common*; *slowabl*
+retract_length = 6
+bed_shape = 5x5,395x5,395x395,5x395
+max_print_height = 400
+printer_model = CR6MAX
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR6MAX\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-6 Max 0.4mm]
+inherits = *Creality CR-6 Max*; *0.4nozzle*
+
+[printer:Creality CR-6 Max 0.3mm]
+inherits = *Creality CR-6 Max*; *0.3nozzle*
+
+[printer:Creality CR-6 Max 0.5mm]
+inherits = *Creality CR-6 Max*; *0.5nozzle*
+
+[printer:Creality CR-6 Max 0.6mm]
+inherits = *Creality CR-6 Max*; *0.6nozzle*
+
 [printer:*Creality CR-10 Mini*]
 inherits = *SmallBowden*
 retract_length = 6
-bed_shape = 2.5x5,2.5x225,302.5x225,302.5x5
+bed_shape = 2.5x5,302.5x5,302.5x225,2.5x225
+max_print_height = 300
 printer_model = CR10MINI
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10MINI\nPRINTER_HAS_BOWDEN
-max_print_height = 300
 
 [printer:Creality CR-10 Mini 0.4mm]
 inherits = *Creality CR-10 Mini*; *0.4nozzle*
@@ -897,13 +1264,30 @@ inherits = *Creality CR-10 Mini*; *0.5nozzle*
 [printer:Creality CR-10 Mini 0.6mm]
 inherits = *Creality CR-10 Mini*; *0.6nozzle*
 
+[printer:*Creality CR-10 Max*]
+inherits = *common*; *slowabl*
+retract_length = 6
+bed_shape = 5x5,445x5,445x445,5x445
+max_print_height = 470
+printer_model = CR10MAX
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10MAX\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-10 Max 0.4mm]
+inherits = *Creality CR-10 Max*; *0.4nozzle*
+
+[printer:Creality CR-10 Max 0.6mm]
+inherits = *Creality CR-10 Max*; *0.6nozzle*
+
+[printer:Creality CR-10 Max 0.8mm]
+inherits = *Creality CR-10 Max*; *0.8nozzle*
+
 [printer:*Creality CR-10*]
 inherits = *SmallBowden*
 retract_length = 6
 bed_shape = 5x5,305x5,305x305,5x305
+max_print_height = 400
 printer_model = CR10
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 0.4mm]
 inherits = *Creality CR-10*; *0.4nozzle*
@@ -918,9 +1302,9 @@ inherits = *Creality CR-10*; *0.8nozzle*
 inherits = *SmallBowden*
 retract_length = 6
 bed_shape = 5x5,305x5,305x305,5x305
+max_print_height = 400
 printer_model = CR10V2
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10V2\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 V2 0.4mm]
 inherits = *Creality CR-10 V2*; *0.4nozzle*
@@ -935,9 +1319,9 @@ inherits = *Creality CR-10 V2*; *0.8nozzle*
 inherits = *SmallBowden*
 retract_length = 1
 bed_shape = 5x5,305x5,305x305,5x305
+max_print_height = 400
 printer_model = CR10V3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10V3
-max_print_height = 400
 
 [printer:Creality CR-10 V3 0.4mm]
 inherits = *Creality CR-10 V3*; *0.4nozzle*
@@ -952,9 +1336,9 @@ inherits = *Creality CR-10 V3*; *0.8nozzle*
 inherits = *SmallBowden*
 retract_length = 6
 bed_shape = 5x5,305x5,305x305,5x305
+max_print_height = 400
 printer_model = CR10S
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 S 0.4mm]
 inherits = *Creality CR-10 S*; *0.4nozzle*
@@ -968,10 +1352,10 @@ inherits = *Creality CR-10 S*; *0.8nozzle*
 [printer:*Creality CR-10 S Pro*]
 inherits = *SmallBowden*; *slowabl*
 retract_length = 6
-bed_shape = 0x0,300x0,300x300,0x300
+bed_shape = 5x5,295x5,295x295,5x295
+max_print_height = 400
 printer_model = CR10SPRO
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPRO\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 S Pro 0.4mm]
 inherits = *Creality CR-10 S Pro*; *0.4nozzle*
@@ -986,9 +1370,9 @@ inherits = *Creality CR-10 S Pro*; *0.8nozzle*
 inherits = *SmallBowden*; *slowabl*
 retract_length = 6
 bed_shape = 5x5,305x5,305x305,5x305
+max_print_height = 400
 printer_model = CR10SPROV2
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPROV2\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 S Pro V2 0.4mm]
 inherits = *Creality CR-10 S Pro V2*; *0.4nozzle*
@@ -1002,10 +1386,10 @@ inherits = *Creality CR-10 S Pro V2*; *0.8nozzle*
 [printer:*Creality CR-10 S4*]
 inherits = *SmallBowden*
 retract_length = 6
-bed_shape = 5x5,405x5,405x405,5x405
+bed_shape = 5x5,395x5,395x395,5x395
+max_print_height = 400
 printer_model = CR10S4
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S4\nPRINTER_HAS_BOWDEN
-max_print_height = 400
 
 [printer:Creality CR-10 S4 0.4mm]
 inherits = *Creality CR-10 S4*; *0.4nozzle*
@@ -1020,9 +1404,9 @@ inherits = *Creality CR-10 S4*; *0.8nozzle*
 inherits = *SmallBowden*
 retract_length = 6
 bed_shape = 5x5,505x5,505x505,5x505
+max_print_height = 500
 printer_model = CR10S5
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S5\nPRINTER_HAS_BOWDEN
-max_print_height = 500
 
 [printer:Creality CR-10 S5 0.4mm]
 inherits = *Creality CR-10 S5*; *0.4nozzle*
@@ -1032,9 +1416,6 @@ inherits = *Creality CR-10 S5*; *0.6nozzle*
 
 [printer:Creality CR-10 S5 0.8mm]
 inherits = *Creality CR-10 S5*; *0.8nozzle*
-printer_model = CR10S5
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S5\nPRINTER_HAS_BOWDEN
-max_print_height = 500
 
 [printer:*Creality CR-20*]
 inherits = *SmallBowden*
@@ -1071,3 +1452,40 @@ inherits = *Creality CR-20 Pro*; *0.5nozzle*
 [printer:Creality CR-20 Pro 0.6mm]
 inherits = *Creality CR-20 Pro*; *0.6nozzle*
 
+[printer:*Creality CR-200B*]
+inherits = *common*; *descendingz*
+bed_shape = 5x5,195x5,195x195,5x195
+max_print_height = 200
+printer_model = CR200B
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR200B\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-200B 0.4mm]
+inherits = *Creality CR-200B*; *0.4nozzle*
+
+[printer:Creality CR-200B 0.3mm]
+inherits = *Creality CR-200B*; *0.3nozzle*
+
+[printer:Creality CR-200B 0.5mm]
+inherits = *Creality CR-200B*; *0.5nozzle*
+
+[printer:Creality CR-200B 0.6mm]
+inherits = *Creality CR-200B*; *0.6nozzle*
+
+[printer:*Creality CR-8*]
+inherits = *common*
+bed_shape = 5x5,215x5,215x215,5x215
+max_print_height = 210
+printer_model = CR8
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR8\nPRINTER_HAS_BOWDEN
+
+[printer:Creality CR-8 0.4mm]
+inherits = *Creality CR-8*; *0.4nozzle*
+
+[printer:Creality CR-8 0.3mm]
+inherits = *Creality CR-8*; *0.3nozzle*
+
+[printer:Creality CR-8 0.5mm]
+inherits = *Creality CR-8*; *0.5nozzle*
+
+[printer:Creality CR-8 0.6mm]
+inherits = *Creality CR-8*; *0.6nozzle*