Various modifications to adapt to susi 2.3.57

 * add empty .*extrusion_spacing
 * seam nearest -> cost-based with correct weight
 * overhangs -> overhangs_width_speed & overhangs_width
 * first_layer_speed -add-> first_layer_min_speed & first_layer_infill_speed
 * smooth top -> monotonic
 * some various fixes
supermerill/SuperSlicer#1661

1 files changed, 22 insertions, 3 deletions

diff --git a/FLSun.ini b/FLSun.ini
index e4c91b5..6706636 100644
--- a/FLSun.ini
+++ b/FLSun.ini
@@ -7,7 +7,7 @@
 name = FLSun

 # Configuration version of this file. Config file will only be installed, if the config_version differs.

 # This means, the server may force the PrusaSlicer configuration to be downgraded.

-config_version = 0.0.2-susi

+config_version = 0.0.2-susi2

 # Where to get the updates from?

 config_update_url = 

 #https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/FLSun/

@@ -68,6 +68,8 @@ first_layer_acceleration = 800
 first_layer_extrusion_width = 0.42

 first_layer_height = 0.2

 first_layer_speed = 20

+first_layer_min_speed = 20

+first_layer_infill_speed = 20

 gap_fill_speed = 40

 gcode_comments = 0

 infill_acceleration = 800

@@ -89,7 +91,8 @@ max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0

 min_skirt_length = 4

 notes = 

-overhangs = 1

+overhangs_width_speed = 50%

+overhangs_width = 75%

 only_retract_when_crossing_perimeters = 0

 ooze_prevention = 0

 output_filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gco

@@ -101,7 +104,9 @@ perimeter_speed = 45
 post_process = 

 print_settings_id = 

 raft_layers = 0

-seam_position = nearest

+seam_position = cost

+seam_angle_cost = 30%

+seam_travel_cost = 70%

 single_extruder_multi_material_priming = 0

 skirts = 2

 skirt_distance = 5

@@ -147,6 +152,13 @@ wipe_tower_width = 60
 wipe_tower_x = 170

 wipe_tower_y = 140

 xy_size_compensation = 0

+extrusion_spacing =

+perimeter_extrusion_spacing =

+external_perimeter_extrusion_spacing =

+first_layer_extrusion_spacing =

+infill_extrusion_spacing =

+solid_infill_extrusion_spacing =

+top_infill_extrusion_spacing =

 

 ## QQS

 

@@ -220,6 +232,7 @@ bridge_speed = 20
 external_perimeter_speed = 70%

 first_layer_acceleration = 500

 first_layer_speed = 40%

+first_layer_infill_speed = 40%

 gap_fill_speed = 20

 infill_acceleration = 800

 infill_speed = 40

@@ -249,6 +262,8 @@ first_layer_acceleration = 1000
 first_layer_height = 0.3

 first_layer_extrusion_width = 0.9

 first_layer_speed = 20

+first_layer_min_speed = 20

+first_layer_infill_speed = 20

 fill_density = 0%

 infill_extrusion_width = 0.9

 ironing = 0

@@ -392,6 +407,8 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and
 external_perimeter_speed = 50

 extra_perimeters = 1

 first_layer_speed = 35

+first_layer_min_speed = 35

+first_layer_infill_speed = 35

 infill_speed = 90

 perimeter_speed = 60

 small_perimeter_speed = 50%

@@ -417,6 +434,7 @@ inherits = *0.24mm_flsunq*; *QQSP*
 compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4

 external_perimeter_speed = 50%

 first_layer_speed = 20%

+first_layer_infill_speed = 20%

 infill_speed = 120

 perimeter_speed = 60

 small_perimeter_speed = 50%

@@ -461,6 +479,7 @@ inherits = *0.30mm_flsunq*; *QQSP*
 compatible_printers_condition = printer_notes=~/.*PRINTER_MODEL_Q(QSP|5).*/ and nozzle_diameter[0]==0.4

 external_perimeter_speed = 50%

 first_layer_speed = 20%

+first_layer_infill_speed = 20%

 infill_speed = 120

 perimeter_speed = 80

 small_perimeter_speed = 50%