merge PrusaSlicer profiles from 2.4.2-rc1

Zonestar modified with latest revision for the pr.

1 files changed, 491 insertions, 0 deletions

diff --git a/Snapmaker.ini b/Snapmaker.ini
new file mode 100644
index 0000000..a2cd17d
--- /dev/null
+++ b/Snapmaker.ini
@@ -0,0 +1,491 @@
+# Snapmaker profiles
+
+# Based on the profiles from: https://github.com/nivekmai/snapmaker-prusa by nivekmai, WilliamBosacker, mrworf
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Snapmaker
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the Slic3r configuration to be downgraded.
+config_version = 1.0.1-slic3r
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Snapmaker/
+# The printer models will be shown by the Configuration Wizard in this order,
+
+[printer_model:A250]
+name = Snapmaker A250
+variants = 0.4
+technology = FFF
+bed_model = A250_bed.stl
+bed_texture = A250_texture.svg
+default_materials = Generic PLA @Snapmaker; Generic PETG @Snapmaker
+
+[printer_model:A350]
+name = Snapmaker A350
+variants = 0.4
+technology = FFF
+bed_model = A350_bed.stl
+bed_texture = A350_texture.svg
+default_materials = Generic PLA @Snapmaker; Generic PETG @Snapmaker
+
+[print:*common*]
+avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 100%
+bridge_speed = 60
+brim_separation = 0
+brim_width = 0
+clip_multipart_objects = 1
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = disabled
+first_layer_size_compensation = -0.1
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 75
+extrusion_width = 0.45
+extrusion_spacing =
+perimeter_extrusion_spacing =
+external_perimeter_extrusion_spacing =
+first_layer_extrusion_spacing =
+infill_extrusion_spacing =
+solid_infill_extrusion_spacing =
+top_infill_extrusion_spacing =
+fill_angle = 45
+fill_density = 20%
+fill_pattern = gyroid
+first_layer_acceleration = 0
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 15
+first_layer_min_speed = 0
+first_layer_infill_speed = 100%
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 100
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.25
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 100
+max_volumetric_speed = 0
+min_skirt_length = 4
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs_width_speed = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0.0125
+seam_position = cost
+seam_angle_cost=50%
+seam_travel_cost=50%
+single_extruder_multi_material_priming = 1
+skirt_distance = 5
+skirt_height = 1
+skirts = 3
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 25%
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 80%
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.38
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 60
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+bridge_type = nozzle
+bridge_overlap_min = 80%
+bridge_overlap = 95%
+thin_walls = 0
+threads = 8
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 60%
+top_solid_layers = 4
+top_solid_min_thickness = 0
+travel_speed = 150
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4
+
+[print:0.10mm HIGHDETAIL @SnapmakerA350]
+inherits = *common*
+layer_height = 0.1
+bottom_solid_layers = 7
+top_solid_layers = 8
+top_solid_min_thickness = 0.8
+bottom_solid_min_thickness = 0.8
+bridge_speed = 40
+infill_speed = 50
+perimeter_speed = 40
+support_material_speed = 40
+max_print_speed = 50
+skirt_distance = 10
+first_layer_speed = 25
+first_layer_min_speed = 0
+first_layer_infill_speed = 100%%
+compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
+
+[print:0.16mm OPTIMAL @SnapmakerA350]
+inherits = *common*
+layer_height = 0.16
+top_solid_layers = 6
+bottom_solid_layers = 6
+first_layer_speed = 25
+first_layer_min_speed = 0
+first_layer_infill_speed = 100%%
+max_print_speed = 60
+compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
+
+[print:0.20mm NORMAL @SnapmakerA350]
+inherits = *common*
+compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
+
+[print:0.20mm FAST @SnapmakerA350]
+inherits = 0.20mm NORMAL @SnapmakerA350
+bridge_speed = 80
+gap_fill_speed = 30
+infill_speed = 120
+ironing_speed = 20
+perimeter_speed = 80
+support_material_speed = 80
+compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
+
+[print:0.08mm DETAIL @SnapmakerA250]
+inherits = 0.20mm NORMAL @SnapmakerA250
+layer_height = 0.08
+infill_speed = 40
+external_perimeter_speed = 10
+perimeter_speed = 15
+top_solid_infill_speed = 20
+travel_speed = 70
+first_layer_extrusion_width = 0.45
+perimeter_extrusion_width = 0.4
+external_perimeter_extrusion_width = 0.4
+infill_extrusion_width = 0.4
+solid_infill_extrusion_width = 0.4
+top_infill_extrusion_width = 0.4
+
+[print:0.20mm NORMAL @SnapmakerA250]
+inherits = *common*
+compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A250"
+first_layer_speed = 15
+first_layer_min_speed = 0
+first_layer_infill_speed = 100%
+gap_fill_speed = 15
+infill_speed = 50
+perimeter_speed = 25
+small_perimeter_speed = 20
+external_perimeter_speed = 15
+support_material_speed = 25
+top_solid_infill_speed = 25
+travel_speed = 80
+max_print_speed = 80
+skirt_distance = 3
+min_skirt_length = 25
+
+[print:0.24mm FAST @SnapmakerA250]
+inherits = 0.20mm NORMAL @SnapmakerA250
+layer_height = 0.24
+infill_speed = 60
+external_perimeter_speed = 20
+top_solid_infill_speed = 30
+
+[filament:*common*]
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+full_fan_speed_layer = 0
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 210
+
+[filament:*PLA*]
+inherits = *common*
+
+[filament:*PETG*]
+inherits = *common*
+first_layer_bed_temperature = 80
+bed_temperature = 75
+first_layer_temperature = 245
+temperature = 245
+filament_density = 1.27
+disable_fan_first_layers = 3
+min_fan_speed = 20
+max_fan_speed = 50
+fan_below_layer_time = 20
+min_print_speed = 20
+filament_max_volumetric_speed = 8
+filament_type = PETG
+
+[filament:Generic PLA @Snapmaker]
+inherits = *PLA*
+filament_vendor = Generic
+
+[filament:Generic PETG @Snapmaker]
+inherits = *PETG*
+filament_vendor = Generic
+
+[filament:Snapmaker PLA @Snapmaker]
+inherits = *PLA*
+filament_vendor = Snapmaker
+
+[filament:Overture PLA @Snapmaker]
+inherits = *PLA*
+filament_vendor = Overture
+bed_temperature = 50
+first_layer_temperature = 205
+temperature = 205
+filament_density = 1.24
+disable_fan_first_layers = 1
+min_fan_speed = 100
+max_fan_speed = 100
+full_fan_speed_layer = 3
+fan_below_layer_time = 100
+min_print_speed = 15
+filament_max_volumetric_speed = 0
+
+[filament:MatterHackers Build Translucent @Snapmaker]
+inherits = *PETG*
+filament_vendor = MatterHackers
+
+[filament:MatterHackers Build White @Snapmaker]
+inherits = MatterHackers Build Translucent @Snapmaker
+bed_temperature = 65
+first_layer_bed_temperature = 70
+first_layer_temperature = 260
+temperature = 255
+filament_density = 1.28
+disable_fan_first_layers = 3
+full_fan_speed_layer = 5
+min_fan_speed = 40
+max_fan_speed = 100
+fan_below_layer_time = 60
+min_print_speed = 10
+
+[filament:Overture TPU @Snapmaker]
+inherits = *common*
+filament_vendor = Overture
+filament_type = FLEX
+first_layer_temperature = 220
+temperature = 220
+filament_density = 1.22
+disable_fan_first_layers = 1
+min_fan_speed = 100
+max_fan_speed = 100
+fan_below_layer_time = 100
+min_print_speed = 15
+filament_retract_speed = 40
+filament_deretract_speed = 25
+filament_retract_length = 1.8
+filament_max_volumetric_speed = 3
+
+# Common printer preset
+[printer:*common*]
+bed_shape = 0x0,320x0,320x350,0x350
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = ""
+default_print_profile = 
+end_gcode = ;End GCode begin\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off\nG90 ;absolute positioning\nG92 E0\nG1 E-2 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG28 X0 Y0 ; home\nM84 ;steppers off\nM107 ;fan off\nM82 ;absolute extrusion mode\n;End GCode end
+extra_loading_move = -2
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = marlin
+high_current_on_filament_swap = 0
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1000
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_travel = 1500
+machine_max_acceleration_x = 3000
+machine_max_acceleration_y = 3000
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 25
+machine_max_feedrate_x = 150
+machine_max_feedrate_y = 150
+machine_max_feedrate_z = 50
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0.3
+max_print_height = 330
+min_layer_height = 0.08
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = 
+printer_technology = FFF
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 3
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 328
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 60
+deretract_speed = 40
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M82 ;absolute extrusion mode\n;Start GCode begin\nM140 S[first_layer_bed_temperature]   ;Start warming Bed\nM104 S{first_layer_temperature+extruder_temperature_offset} ;Start warming Nozzle\nG28 ; home all axes\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000\nG1 Z0 F1800\nM190 S[first_layer_bed_temperature]   ;Wait For Bed Temperature\nM109 S{first_layer_temperature+extruder_temperature_offset} ;Wait for Hotend Temperature\nG92 E0\nG1 E20 F200  ; Prime extrude for wipe\nG92 E0
+thumbnails = 16x16,220x124
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+
+[printer:Snapmaker A350]
+inherits = *common*
+printer_model = A350
+printer_variant = 0.4
+default_filament_profile = Generic PLA @Snapmaker
+default_print_profile = 0.20mm NORMAL @SnapmakerA350
+
+[printer:Snapmaker A250]
+inherits = *common*
+printer_model = A250
+printer_variant = 0.4
+bed_shape = 0x0,230x0,230x250,0x250
+thumbnails = 
+variable_layer_height = 0
+retract_lift_below = 0
+max_print_height = 235
+start_gcode = M82 ;absolute extrusion mode\n;Start GCode begin\nM140 S[first_layer_bed_temperature]   ;Start Warming Bed\nM104 S160 ;Preheat Nozzle\nG28 ; home all axes\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000\nG1 Z0 F1800\nG1 Z5 F5000 ; lift nozzle\nM190 S[first_layer_bed_temperature]   ;Wait For Bed Temperature\nM109 S{first_layer_temperature+extruder_temperature_offset} ;Wait for Hotend Temperature\nG92 E0\nG1 E10 F200\nG1 E-2 F300\nG92 E0\n;Start GCode end\nG1 F3600 E-2
+end_gcode = M140 S0\n;End GCode begin\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG90 ;absolute positioning\nG92 E0\nG1 E-2 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z330 E-1 F80 ;move Z up a bit and retract filament even more\nG1 X0 F3000 ;move X to min endstops, so the head is out of the way\nG1 Y250 F3000 ;so the head is out of the way and Plate is moved forward\nM84 ;steppers off\n;End GCode end\nM82 ;absolute extrusion mode\nM104 S0\nM107\n;End of Gcode
+default_filament_profile = Generic PLA @Snapmaker
+default_print_profile = 0.20mm NORMAL @SnapmakerA250