diff options
Diffstat (limited to 'Anycubic.ini')
| -rw-r--r-- | Anycubic.ini | 52 |
1 files changed, 35 insertions, 17 deletions
diff --git a/Anycubic.ini b/Anycubic.ini index 01a8374..50460c9 100644 --- a/Anycubic.ini +++ b/Anycubic.ini @@ -5,7 +5,7 @@ name = Anycubic # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 0.0.11-susi2 +config_version = 0.0.13-slic3r # Where to get the updates from? config_update_url = #https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anycubic/ @@ -47,12 +47,16 @@ name = Anycubic i3 Mega variants = 0.4 technology = FFF family = MEGA +bed_model = i3megas_bed.stl +bed_texture = i3megas.svg [printer_model:I3MEGAS] name = Anycubic i3 Mega S variants = 0.4 technology = FFF family = MEGA +bed_model = i3megas_bed.stl +bed_texture = i3megas.svg [printer_model:PREDATOR] name = Anycubic Predator @@ -851,36 +855,37 @@ end_gcode = M117 Cooling down...\nM104 S0 ; turn off extruder\nM107 ; Fan off\nM bottom_solid_min_thickness = 0.5 bridge_acceleration = 1000 bridge_flow_ratio = 95% -bridge_speed = 30 +bridge_speed = 25 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANYCUBIC.*/ and printer_notes=~/.*PRINTER_MODEL_I3_MEGA.*/ and nozzle_diameter[0]==0.4 default_acceleration = 1000 ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 25 +external_perimeter_speed = 40 extruder_clearance_height = 35 extruder_clearance_radius = 60 extrusion_width = 0.45 fill_density = 15% fill_pattern = gyroid -first_layer_acceleration = 1000 +first_layer_acceleration = 800 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 first_layer_min_speed = 20 first_layer_infill_speed = 20 gap_fill_speed = 40 -gcode_comments = 1 +gcode_comments = 0 +gcode_label_objects = 1 infill_acceleration = 1000 infill_anchor = 2.5 infill_anchor_max = 12 infill_extrusion_width = 0.45 -max_print_speed = 200 +max_print_speed = 100 min_skirt_length = 4 only_retract_when_crossing_perimeters = 0 output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode perimeter_acceleration = 800 perimeter_extrusion_width = 0.45 -perimeter_speed = 45 +perimeter_speed = 50 perimeters = 2 seam_position = cost seam_angle_cost = 30% @@ -892,22 +897,24 @@ small_perimeter_speed = 25 slice_closing_radius = 0.05 solid_infill_below_area = 0 solid_infill_extrusion_width = 0.45 -solid_infill_speed = 80 -support_material_buildplate_only = 1 +solid_infill_speed = 50 +support_material = 0 +support_material_buildplate_only = 0 support_material_contact_distance_type = filament support_material_contact_distance_top = 0.1 support_material_contact_distance_bottom = 0.1 support_material_extrusion_width = 0.35 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 +support_material_interface_speed = 80% support_material_spacing = 2 support_material_speed = 50 -support_material_threshold = 55 +support_material_threshold = 50 +support_material_xy_spacing = 60% thin_walls = 0 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 40 -top_solid_layers = 5 -top_solid_min_thickness = 0.6 +top_solid_min_thickness = 0.7 travel_speed = 180 extrusion_spacing = perimeter_extrusion_spacing = @@ -927,6 +934,8 @@ support_material = 1 [print:*0.15mm_mega*] inherits = *common_mega* bottom_solid_layers = 5 +bridge_flow_ratio = 1 +infill_speed = 60 layer_height = 0.15 top_solid_layers = 7 @@ -943,6 +952,7 @@ inherits = *0.15mm_mega*;*supported_mega* [print:*0.20mm_mega*] inherits = *common_mega* bottom_solid_layers = 4 +infill_speed = 60 layer_height = 0.2 top_solid_layers = 5 @@ -962,7 +972,7 @@ bottom_solid_layers = 4 external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 35 extrusion_width = 0.5 -fill_pattern = grid +fill_pattern = cubic infill_extrusion_width = 0.5 infill_speed = 85 layer_height = 0.3 @@ -1130,6 +1140,14 @@ first_layer_temperature = 215 min_fan_speed = 100 temperature = 210 +[filament:DAS FILAMENT PETG @MEGA] +inherits = *PETG_mega* +filament_vendor = DAS FILAMENT +bed_temperature = 75 +first_layer_bed_temperature = 75 +first_layer_temperature = 220 +temperature = 225 + [filament:*PLA_mega*] inherits = *common_mega* bed_temperature = 60 @@ -1204,7 +1222,7 @@ bed_shape = 0x0,210x0,210x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z] default_filament_profile = Generic PLA @MEGA default_print_profile = 0.15mm QUALITY @MEGA -deretract_speed = 40 +deretract_speed = 50 end_gcode = G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors extruder_colour = #808080 gcode_flavor = marlin @@ -1215,10 +1233,10 @@ remaining_times = 1 retract_before_travel = 1.5 retract_before_wipe = 60% retract_layer_change = 1 -retract_length = 3.2 -retract_lift = 0.2 +retract_length = 6 +retract_lift = 0.075 retract_lift_below = 204 -retract_speed = 70 +retract_speed = 40 silent_mode = 0 start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting]\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG1 Y1.0 Z0.3 F1000 ; move print head up\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG92 E0.0\n; initial load\nG1 X205.0 E19 F1000\nG1 Y1.6\nG1 X5.0 E19 F1000\nG92 E0.0\n; intro line\nG1 Y2.0 Z0.2 F1000\nG1 X65.0 E9.0 F1000\nG1 X105.0 E12.5 F1000\nG92 E0.0 thumbnails = 16x16,220x124 |