diff options
Diffstat (limited to 'TriLAB.ini')
| -rw-r--r-- | TriLAB.ini | 892 |
1 files changed, 892 insertions, 0 deletions
diff --git a/TriLAB.ini b/TriLAB.ini new file mode 100644 index 0000000..140dda0 --- /dev/null +++ b/TriLAB.ini @@ -0,0 +1,892 @@ +# Print profiles for the TriLAB printers +# based on https://github.com/trilab3d/PrusaSlicer-settings/tree/master/live/TriLAB + +[vendor] +# Vendor name will be shown by the Config Wizard. +name = TriLAB +# Configuration version of this file. Config file will only be installed, if the config_version differs. +# This means, the server may force the PrusaSlicer configuration to be downgraded. +config_version = 0.0.6 +# Where to get the updates from? +config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/ +# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% + +# The printer models will be shown by the Configuration Wizard in this order, +# also the first model installed & the first nozzle installed will be activated after install. +# Printer model name will be shown by the installation wizard. + +[printer_model:DQ2] +name = DeltiQ 2 +variants = 0.4; 0.8 +technology = FFF +family = DeltiQ 2 +bed_model = dq2_bed.stl +bed_texture = dq2_bed_texture.svg +default_materials = DeltiQ - PLA - Generic; DeltiQ - PETG - Generic; DeltiQ - ABS - Generic; DeltiQ - PLA - ExtraFill (Fillamentum); DeltiQ - PETG (Devil Design); DeltiQ - ABS - ExtraFill (Fillamentum); DeltiQ - ASA - ExtraFill (Fillamentum); DeltiQ - CPE - HG100 (Fillamentum); DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL); DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle + +[printer_model:DQ2P] +name = DeltiQ 2 Plus +variants = 0.4; 0.8 +technology = FFF +family = DeltiQ 2 +bed_model = dq2_bed.stl +bed_texture = dq2_bed_texture.svg +default_materials = DeltiQ - PLA - Generic; DeltiQ - PETG - Generic; DeltiQ - ABS - Generic; DeltiQ - PLA - ExtraFill (Fillamentum); DeltiQ - PETG (Devil Design); DeltiQ - ABS - ExtraFill (Fillamentum); DeltiQ - ASA - ExtraFill (Fillamentum); DeltiQ - CPE - HG100 (Fillamentum); DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle + +[printer_model:DQ2+FP2] +name = DeltiQ 2 + FlexPrint 2 +variants = 0.4 +technology = FFF +family = DeltiQ 2 +bed_model = dq2_bed.stl +bed_texture = dq2_bed_texture.svg +default_materials = DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL) + +[printer_model:DQ2P+FP2] +name = DeltiQ 2 Plus + FlexPrint 2 +variants = 0.4 +technology = FFF +family = DeltiQ 2 +bed_model = dq2_bed.stl +bed_texture = dq2_bed_texture.svg +default_materials = DeltiQ FP2 - PLA - Generic; DeltiQ FP2 - PETG - Generic; DeltiQ FP2 - ABS - Generic; DeltiQ FP2 - PLA - ExtraFill (Fillamentum); DeltiQ FP2 - PETG (Devil Design); DeltiQ FP2 - ABS - ExtraFill (Fillamentum); DeltiQ FP2 - ASA - ExtraFill (Fillamentum); DeltiQ FP2 - CPE - HG100 (Fillamentum); DeltiQ FP2 - FLEX - Generic; DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum); DeltiQ FP2 - TPU 93A (SMARTFIL) + +[printer_model:DQ2+FP] +name = DeltiQ 2 + FlexPrint +variants = 0.4 +technology = FFF +family = DeltiQ 2 +bed_model = dq2_bed.stl +bed_texture = dq2_bed_texture.svg +default_materials = DeltiQ FP - PLA - Generic; DeltiQ FP - PETG - Generic; DeltiQ FP - ABS - Generic; DeltiQ FP - PLA - ExtraFill (Fillamentum); DeltiQ FP - PETG (Devil Design); DeltiQ FP - ABS - ExtraFill (Fillamentum); DeltiQ FP - ASA - ExtraFill (Fillamentum); DeltiQ FP - CPE - HG100 (Fillamentum); DeltiQ FP - FLEX - Generic; + +[printer_model:DQ2P+FP] +name = DeltiQ 2 Plus + FlexPrint +variants = 0.4 +technology = FFF +family = DeltiQ 2 +bed_model = dq2_bed.stl +bed_texture = dq2_bed_texture.svg +default_materials = DeltiQ FP - PLA - Generic; DeltiQ FP - PETG - Generic; DeltiQ FP - ABS - Generic; DeltiQ FP - PLA - ExtraFill (Fillamentum); DeltiQ FP - PETG (Devil Design); DeltiQ FP - ABS - ExtraFill (Fillamentum); DeltiQ FP - ASA - ExtraFill (Fillamentum); DeltiQ FP - CPE - HG100 (Fillamentum); DeltiQ FP - FLEX - Generic + +[printer_model:DQM] +name = DeltiQ M +variants = 0.4 +technology = FFF +family = DeltiQ +default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE + +[printer_model:DQL] +name = DeltiQ L +variants = 0.4 +technology = FFF +family = DeltiQ +default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE + +[printer_model:DQXL] +name = DeltiQ XL +variants = 0.4 +technology = FFF +family = DeltiQ +default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE + +# All presets starting with asterisk, for example *common*, are intermediate and they will +# not make it into the user interface. + +[print:DeltiQ 0.20mm Normal] +avoid_crossing_perimeters = 0 +bottom_fill_pattern = rectilinear +bottom_solid_layers = 4 +bottom_solid_min_thickness = 0.7 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and nozzle_diameter[0]==0.4 +complete_objects = 0 +default_acceleration = 2000 +dont_support_bridges = 0 +draft_shield = 0 +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 0 +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 60 +extruder_clearance_radius = 45 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 20 +gap_fill_speed = 40 +gcode_comments = 0 +gcode_label_objects = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +ironing = 0 +ironing_flowrate = 15% +ironing_spacing = 0.1 +ironing_speed = 15 +ironing_type = top +layer_height = 0.2 +max_print_speed = 60 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}.gcode +overhangs = 1 +perimeter_acceleration = 1500 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 45 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +seam_position = nearest +single_extruder_multi_material_priming = 0 +skirt_distance = 3 +skirt_height = 2 +skirts = 1 +slice_closing_radius = 0.049 +small_perimeter_speed = 20 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 30 +support_material_auto = 1 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.1 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 4 +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 40 +support_material_with_sheath = 0 +support_material_xy_spacing = 0.6 +thin_walls = 0 +threads = 12 +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 40 +top_solid_layers = 5 +top_solid_min_thickness = 0.7 +travel_speed = 150 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_no_sparse_layers = 0 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:DeltiQ 0.10mm Normal] +inherits = DeltiQ 0.20mm Normal +bottom_solid_layers = 7 +bottom_solid_min_thickness = 0.7 +bridge_flow_ratio = 0.7 +bridge_speed = 30 +ensure_vertical_shell_thickness = 1 +layer_height = 0.1 +first_layer_height = 0.2 +top_solid_layers = 9 +top_solid_min_thickness = 0.7 +top_infill_extrusion_width = 0.4 +fill_pattern = grid +fill_density = 20% + +[print:DeltiQ 0.15mm Normal] +inherits = DeltiQ 0.20mm Normal +bottom_solid_layers = 5 +bottom_solid_min_thickness = 0.7 +bridge_flow_ratio = 0.7 +bridge_speed = 30 +ensure_vertical_shell_thickness = 1 +layer_height = 0.15 +first_layer_height = 0.2 +top_solid_layers = 7 +top_solid_min_thickness = 0.7 +fill_pattern = grid +fill_density = 20% + +[print:DeltiQ 0.20mm Vase] +inherits = DeltiQ 0.20mm Normal +perimeters = 1 +top_solid_layers = 0 +fill_density = 0 +support_material = 0 +spiral_vase = 1 +ensure_vertical_shell_thickness = 1 +thin_walls = 0 + +[print:DeltiQ 0.20mm FLEX] +inherits = DeltiQ 0.20mm Normal +avoid_crossing_perimeters = 0 +bridge_flow_ratio = 0.80 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*FLEXPRINT.*/ and nozzle_diameter[0]==0.4 +extra_perimeters = 1 +only_retract_when_crossing_perimeters = 1 +extrusion_width = 0.40 +overhangs = 0 +seam_position = nearest +thin_walls = 0 +bridge_speed = 20 +external_perimeter_speed = 20 +first_layer_speed = 20 +gap_fill_speed = 25 +infill_extrusion_width = 0.55 +infill_speed = 40 +infill_overlap = 27% +perimeter_speed = 25 +small_perimeter_speed = 20 +solid_infill_speed = 30 +solid_infill_extrusion_width = 0.45 +support_material_contact_distance = 0.3 +support_material_speed = 30 +top_solid_infill_speed = 20 +top_fill_pattern = rectilinear +fill_pattern = grid +fill_density = 25% +travel_speed = 200 +max_print_speed = 40 +complete_objects = 1 + +[print:DeltiQ 0.40mm Normal @0.8 nozzle] +inherits = DeltiQ 0.20mm Normal +bottom_solid_layers = 3 +bottom_solid_min_thickness = 1.2 +bridge_flow_ratio = 0.90 +bridge_speed = 20 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and nozzle_diameter[0]==0.8 +elefant_foot_compensation = 0.2 +external_perimeter_extrusion_width = 0.80 +external_perimeter_speed = 30 +extrusion_width = 0.80 +first_layer_extrusion_width = 0.80 +first_layer_height = 0.4 +first_layer_speed = 20 +gap_fill_speed = 40 +infill_extrusion_width = 0.9 +infill_overlap = 28% +infill_speed = 60 +layer_height = 0.4 +max_print_speed = 80 +max_volumetric_speed = 40 +overhangs = 1 +perimeter_extrusion_width = 0.80 +perimeter_speed = 45 +perimeters = 2 +small_perimeter_speed = 20 +solid_infill_extrusion_width = 0.8 +solid_infill_speed = 60 +top_infill_extrusion_width = 0.8 +top_solid_infill_speed = 40 +top_solid_layers = 4 +top_solid_min_thickness = 1.2 + +[print:DeltiQ 0.40mm Vase @0.8 nozzle] +inherits = DeltiQ 0.40mm Normal @0.8 nozzle +bottom_solid_layers = 4 +perimeters = 1 +top_solid_layers = 0 +fill_density = 0 +support_material = 0 +spiral_vase = 1 +ensure_vertical_shell_thickness = 1 +thin_walls = 0 + + +[filament:*DeltiQ common*] +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.4 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +filament_colour = #FF0000 +filament_diameter = 1.75 +filament_minimal_purge_on_wipe_tower = 15 +filament_notes = "" +filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" +filament_settings_id = "" +filament_soluble = 0 +filament_toolchange_delay = 0 +start_filament_gcode = "; FILAMENT_START_GCODE" +end_filament_gcode = "; FILAMENT_END_GCODE" + + +# DeltiQ Filaments # + +[filament:DeltiQ - PLA - Generic] +inherits = *DeltiQ common* +bed_temperature = 55 +bridge_fan_speed = 100 +cooling = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_vendor = Fillamentum +filament_cost = 767 +filament_density = 1.24 +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 2 +filament_retract_before_wipe = 90% +filament_retract_layer_change = 1 +filament_retract_length = 4.0 +filament_retract_lift = 0.2 +filament_retract_speed = 30 +filament_type = PLA +filament_wipe = 1 +first_layer_bed_temperature = 55 +first_layer_temperature = 220 +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +slowdown_below_layer_time = 4 +temperature = 215 + +[filament:DeltiQ - PETG - Generic] +inherits = *DeltiQ common* +bed_temperature = 80 +bridge_fan_speed = 50 +cooling = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_vendor = DevilDesign +filament_cost = 480 +filament_density = 1.27 +filament_deretract_speed = 25 +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 2 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 1 +filament_retract_length = 4.1 +filament_retract_lift = 0.2 +filament_retract_speed = 45 +filament_type = PET +filament_wipe = 1 +first_layer_bed_temperature = 80 +first_layer_temperature = 240 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 10 +slowdown_below_layer_time = 5 +temperature = 245 + +[filament:DeltiQ - ABS - Generic] +inherits = *DeltiQ common* +bed_temperature = 100 +bridge_fan_speed = 25 +cooling = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_vendor = Fillamentum +filament_cost = 774 +filament_density = 1.08 +filament_max_volumetric_speed = 4 +filament_retract_before_travel = 3 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 1 +filament_retract_length = 4.1 +filament_retract_lift = 0.2 +filament_retract_speed = 25 +filament_type = ABS +filament_wipe = 1 +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +max_fan_speed = 15 +min_fan_speed = 5 +min_print_speed = 10 +slowdown_below_layer_time = 15 +temperature = 255 + +[filament:DeltiQ - PLA - ExtraFill (Fillamentum)] +inherits = DeltiQ - PLA - Generic + +[filament:DeltiQ - PETG (Devil Design)] +inherits = DeltiQ - PETG - Generic + +[filament:DeltiQ - ABS - ExtraFill (Fillamentum)] +inherits = DeltiQ - ABS - Generic + +[filament:DeltiQ - ASA - ExtraFill (Fillamentum)] +inherits = DeltiQ - ABS - Generic +filament_density = 1.07 +filament_type = ASA +filament_vendor = Fillamentum +first_layer_temperature = 265 +temperature = 265 + +[filament:DeltiQ - CPE - HG100 (Fillamentum)] +inherits = *DeltiQ common* +bed_temperature = 90 +bridge_fan_speed = 50 +cooling = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_vendor = Fillamentum +filament_cost = 1214 +filament_density = 1.25 +filament_deretract_speed = 25 +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 2 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 0 +filament_retract_length = 4.3 +filament_retract_lift = 0.2 +filament_retract_speed = 45 +filament_type = CPE +filament_wipe = 1 +first_layer_bed_temperature = 90 +first_layer_temperature = 265 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 10 +slowdown_below_layer_time = 5 +temperature = 260 + +[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle] +inherits = DeltiQ - PLA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 +disable_fan_first_layers = 1 +filament_max_volumetric_speed = 40 +first_layer_temperature = 230 +slowdown_below_layer_time = 8 +temperature = 230 +filament_retract_layer_change = 0 +filament_retract_length = 4.1 +filament_retract_speed = 45 +filament_deretract_speed = 25 + +[filament:DeltiQ - PETG (Devil Design) @0.8 nozzle] +inherits = DeltiQ - PETG (Devil Design) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 +filament_max_volumetric_speed = 40 +first_layer_temperature = 240 +slowdown_below_layer_time = 8 +temperature = 240 +filament_retract_layer_change = 0 +filament_retract_length = 4.3 +filament_retract_speed = 45 +filament_deretract_speed = 25 +filament_retract_before_wipe = 80% +filament_wipe = 1 + + +# DeltiQ FlexPrint Filaments # + +[filament:DeltiQ FP - PLA - Generic] +inherits = DeltiQ - PLA - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.7 +filament_retract_speed = 28 + +[filament:DeltiQ FP - PETG - Generic] +inherits = DeltiQ - PETG - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.7 +filament_retract_speed = 25 + +[filament:DeltiQ FP - ABS - Generic] +inherits = DeltiQ - ABS - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.7 +filament_retract_speed = 25 + +[filament:DeltiQ FP - FLEX - Generic] +inherits = *DeltiQ common* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +bed_temperature = 50 +bridge_fan_speed = 80 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1.07 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_vendor = Generic +filament_cost = 1870 +filament_density = 1.22 +filament_deretract_speed = nil +filament_max_volumetric_speed = 0.7 +filament_retract_before_travel = 2 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 0 +filament_retract_length = 2.5 +filament_retract_lift = 0.2 +filament_retract_restart_extra = nil +filament_retract_speed = 20 +filament_type = FLEX +filament_wipe = 1 +first_layer_bed_temperature = 50 +first_layer_temperature = 240 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 4 +temperature = 240 + +[filament:DeltiQ FP - PLA - ExtraFill (Fillamentum)] +inherits = DeltiQ FP - PLA - Generic + +[filament:DeltiQ FP - PETG (Devil Design)] +inherits = DeltiQ FP - PETG - Generic + +[filament:DeltiQ FP - ABS - ExtraFill (Fillamentum)] +inherits = DeltiQ FP - ABS - Generic + +[filament:DeltiQ FP - ASA - ExtraFill (Fillamentum)] +inherits = DeltiQ - ASA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.7 +filament_retract_speed = 25 + +[filament:DeltiQ FP - CPE - HG100 (Fillamentum)] +inherits = DeltiQ - CPE - HG100 (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.7 +filament_retract_speed = 25 +filament_deretract_speed = 0 +filament_retract_before_wipe = 0% + + +# DeltiQ FlexPrint 2 Filaments # + +[filament:DeltiQ FP2 - PLA - Generic] +inherits = DeltiQ FP - PLA - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 1.2 +filament_retract_speed = 28 + +[filament:DeltiQ FP2 - PETG - Generic] +inherits = DeltiQ FP - PETG - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 1.4 +filament_retract_speed = 35 +filament_retract_before_wipe = 0% + +[filament:DeltiQ FP2 - ABS - Generic] +inherits = DeltiQ FP - ABS - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.8 +filament_retract_speed = 25 + +[filament:DeltiQ FP2 - PLA - ExtraFill (Fillamentum)] +inherits = DeltiQ FP2 - PLA - Generic + +[filament:DeltiQ FP2 - PETG (Devil Design)] +inherits = DeltiQ FP2 - PETG - Generic + +[filament:DeltiQ FP2 - ABS - ExtraFill (Fillamentum)] +inherits = DeltiQ FP2 - ABS - Generic + +[filament:DeltiQ FP2 - ASA - ExtraFill (Fillamentum)] +inherits = DeltiQ FP - ASA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 + +[filament:DeltiQ FP2 - CPE - HG100 (Fillamentum)] +inherits = DeltiQ FP - CPE - HG100 (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +filament_retract_length = 0.8 +filament_retract_speed = 35 +filament_deretract_speed = 0 +filament_retract_before_wipe = 0% + +[filament:DeltiQ FP2 - FLEX - Generic] +inherits = DeltiQ FP - FLEX - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +bed_temperature = 50 +bridge_fan_speed = 80 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1.07 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_vendor = Fillamentum +filament_cost = 1870 +filament_density = 1.22 +filament_deretract_speed = nil +filament_max_volumetric_speed = 2.9 +filament_retract_before_travel = 2 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 0 +filament_retract_length = 2.5 +filament_retract_lift = 0.2 +filament_retract_restart_extra = nil +filament_retract_speed = 20 +filament_type = FLEX +filament_wipe = 1 +first_layer_bed_temperature = 50 +first_layer_temperature = 225 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 4 +temperature = 225 + +[filament:DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum)] +inherits = DeltiQ FP2 - FLEX - Generic +bed_temperature = 50 +bridge_fan_speed = 80 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1.10 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_vendor = Fillamentum +filament_cost = 1870 +filament_density = 1.22 +filament_deretract_speed = nil +filament_max_volumetric_speed = 2.9 +filament_retract_before_travel = 2 +filament_retract_before_wipe = 70% +filament_retract_layer_change = 0 +filament_retract_length = 2.5 +filament_retract_lift = 0.2 +filament_retract_restart_extra = nil +filament_retract_speed = 20 +filament_type = TPU92A +filament_wipe = 1 +first_layer_bed_temperature = 50 +first_layer_temperature = 230 +max_fan_speed = 70 +min_fan_speed = 50 +min_print_speed = 5 +slowdown_below_layer_time = 4 +temperature = 230 + +[filament:DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum)] +inherits = DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum) +extrusion_multiplier = 1.10 +filament_cost = 1870 +filament_density = 1.23 +filament_deretract_speed = nil +filament_max_volumetric_speed = 2.9 +filament_retract_before_wipe = 70% +filament_retract_length = 2.5 +filament_retract_speed = 20 +filament_type = TPU98A + +[filament:DeltiQ FP2 - TPU 93A (SMARTFIL)] +inherits = DeltiQ FP2 - FLEX - Generic +bed_temperature = 50 +bridge_fan_speed = 80 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1.00 +fan_always_on = 1 +fan_below_layer_time = 10 +filament_vendor = Smartfil +filament_cost = 1209 +filament_density = 1.21 +filament_deretract_speed = nil +filament_max_volumetric_speed = 2.5 +filament_retract_before_travel = 2 +filament_retract_before_wipe = nil +filament_retract_layer_change = 0 +filament_retract_length = 2.9 +filament_retract_lift = 0.2 +filament_retract_restart_extra = nil +filament_retract_speed = 35 +filament_type = TPU93A +filament_wipe = 0 +first_layer_bed_temperature = 50 +first_layer_temperature = 235 +max_fan_speed = 70 +min_fan_speed = 30 +min_print_speed = 10 +slowdown_below_layer_time = 4 +temperature = 235 + + +# DeltiQ Printer # + +[printer:*DeltiQ*] +inherits = +bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z] +between_objects_gcode = +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +default_filament_profile = "DeltiQ PLA" +default_print_profile = DeltiQ 0.20mm Normal +deretract_speed = 0 +end_gcode = ;END\nM104 S0 ; Turn extruder heater off\nM140 S0 ; Turn bed heater off\nG28 ; Home all axes\nM84 S5 ; Stop all axes and hold inidle for 5 seconds\nG90 ; Absolute positioning +extra_loading_move = -2 +extruder_colour = #FF0000 +extruder_offset = 0x0 +gcode_flavor = repetier +layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n +max_layer_height = 0.25 +max_print_height = 320 +min_layer_height = 0.15 +nozzle_diameter = 0.4 +parking_pos_retraction = 92 +printer_model = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQL +printer_settings_id = +printer_variant = +printer_vendor = TriLAB Group s.r.o. +remaining_times = 0 +retract_before_travel = 3 +retract_before_wipe = 100% +retract_layer_change = 1 +retract_length = 4.0 +retract_length_toolchange = 10 +retract_lift = 0.2 +retract_lift_above = 0 +retract_lift_below = 319 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder +thumbnails = +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 0 +wipe = 1 +z_offset = 0 + +[printer:DeltiQ L] +inherits = *DeltiQ* +printer_model = DQL +printer_variant = 0.4 +bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013 +max_print_height = 320 + +[printer:DeltiQ M] +inherits = *DeltiQ* +printer_variant = 0.4 +bed_shape = 89.507x9.40756,88.0333x18.7121,85.5951x27.8115,82.2191x36.6063,77.9423x45,72.8115x52.9007,66.883x60.2218,60.2218x66.883,52.9007x72.8115,45x77.9423,36.6063x82.2191,27.8115x85.5951,18.7121x88.0333,9.40756x89.507,2.54949e-014x90,-9.40756x89.507,-18.7121x88.0333,-27.8115x85.5951,-36.6063x82.2191,-45x77.9423,-52.9007x72.8115,-60.2218x66.883,-66.883x60.2218,-72.8115x52.9007,-77.9423x45,-82.2191x36.6063,-85.5951x27.8115,-88.0333x18.7121,-89.507x9.40756,-90x5.09899e-014,-89.507x-9.40756,-88.0333x-18.7121,-85.5951x-27.8115,-82.2191x-36.6063,-77.9423x-45,-72.8115x-52.9007,-66.883x-60.2218,-60.2218x-66.883,-52.9007x-72.8115,-45x-77.9423,-36.6063x-82.2191,-27.8115x-85.5951,-18.7121x-88.0333,-9.40756x-89.507,-1.65327e-014x-90,9.40756x-89.507,18.7121x-88.0333,27.8115x-85.5951,36.6063x-82.2191,45x-77.9423,52.9007x-72.8115,60.2218x-66.883,66.883x-60.2218,72.8115x-52.9007,77.9423x-45,82.2191x-36.6063,85.5951x-27.8115,88.0333x-18.7121,89.507x-9.40756,90x-1.0198e-013 +max_print_height = 230 +printer_model = DQM +retract_length = 3.7 +retract_length_toolchange = 10 +retract_speed = 30 +start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-45 Y-77 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set Extruder Temperature and Wait\nG3 X45 Y-77 I45 J77 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder + +[printer:DeltiQ XL] +inherits = *DeltiQ* +printer_model = DQXL +printer_variant = 0.4 +bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-014x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-014,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-014x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-013 +max_print_height = 500 +retract_length = 4.5 +retract_speed = 35 + +[printer:*DeltiQ 2*] +inherits = *DeltiQ* +before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n +end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors +gcode_flavor = reprap +layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z] +pause_print_gcode = M0 +start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT0 ; Select Titan extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2 + +[printer:DeltiQ 2] +inherits = *DeltiQ 2* +printer_model = DQ2 +printer_variant = 0.4 +max_print_height = 320 + +[printer:DeltiQ 2 - 0.8 nozzle] +inherits = DeltiQ 2 +printer_variant = 0.8 +max_layer_height = 0.4 +min_layer_height = 0.4 +nozzle_diameter = 0.8 +default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle" +default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle + +[printer:DeltiQ 2 Plus] +inherits = *DeltiQ 2* +printer_model = DQ2P +printer_variant = 0.4 +max_print_height = 500 + +[printer:DeltiQ 2 Plus - 0.8 nozzle] +inherits = DeltiQ 2 Plus +printer_variant = 0.8 +max_layer_height = 0.4 +min_layer_height = 0.4 +nozzle_diameter = 0.8 +default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle" +default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle + +[printer:*DeltiQ 2 FlexPrint*] +inherits = *DeltiQ 2* +start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder +default_print_profile = DeltiQ 0.20mm FLEX +default_filament_profile = "DeltiQ FP2 - FLEX - Generic" +retract_length = 0.7 +retract_speed = 25 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT1 + +[printer:DeltiQ 2 + FlexPrint] +inherits = *DeltiQ 2 FlexPrint* +printer_model = DQ2+FP +printer_variant = 0.4 +max_print_height = 320 + +[printer:DeltiQ 2 Plus + FlexPrint] +inherits = *DeltiQ 2 FlexPrint* +printer_model = DQ2P+FP +printer_variant = 0.4 +max_print_height = 500 + +[printer:*DeltiQ 2 FlexPrint 2*] +inherits = *DeltiQ 2 FlexPrint* +default_filament_profile = "DeltiQ FP2 - FLEX - Generic" +retract_length = 0.8 +retract_speed = 25 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT2 + +[printer:DeltiQ 2 + FlexPrint 2] +inherits = *DeltiQ 2 FlexPrint 2* +printer_model = DQ2+FP2 +printer_variant = 0.4 +max_print_height = 320 + +[printer:DeltiQ 2 Plus + FlexPrint 2] +inherits = *DeltiQ 2 FlexPrint 2* +printer_model = DQ2P+FP2 +printer_variant = 0.4 +max_print_height = 500 + + +[presets] +print = DeltiQ 0.20mm Normal +printer = DeltiQ 2 +filament = DeltiQ - PLA - Generic
\ No newline at end of file |