diff options
Diffstat (limited to 'Voron.ini')
| -rw-r--r-- | Voron.ini | 316 |
1 files changed, 238 insertions, 78 deletions
@@ -701,6 +701,10 @@ solid_infill_extrusion_width = 110% top_infill_extrusion_width = 110% support_material_extrusion_width = 110% +[print:*zero_toolhead*] +extruder_clearance_height = 38 +extruder_clearance_radius = 34 + # Print parameters common to a 0.25mm diameter nozzle. [print:*0.25nozzle*] perimeters = 5 @@ -836,168 +840,324 @@ top_solid_layers = 3 layer_height = 0.8 bridge_flow_ratio = 90% -[print:0.05mm 0.25nozzle] +[print:0.05mm 0.25nozzle V2] inherits = *0.05mm*; *0.25nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.25 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25 -[print:0.05mm 0.3nozzle] +[print:0.05mm 0.3nozzle V2] inherits = *0.05mm*; *0.3nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.3 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3 -[print:0.05mm 0.4nozzle] +[print:0.05mm 0.4nozzle V2] inherits = *0.05mm*; *0.4nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.4 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4 -[print:0.05mm 0.5nozzle] +[print:0.05mm 0.5nozzle V2] inherits = *0.05mm*; *0.5nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.5 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5 + +[print:0.05mm 0.25nozzle V0] +inherits = *0.05mm*; *0.25nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.25 + +[print:0.05mm 0.3nozzle V0] +inherits = *0.05mm*; *0.3nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3 + +[print:0.05mm 0.4nozzle V0] +inherits = *0.05mm*; *0.4nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4 + +[print:0.05mm 0.5nozzle V0] +inherits = *0.05mm*; *0.5nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5 -[print:0.10mm 0.25nozzle] +[print:0.10mm 0.25nozzle V2] inherits = *0.10mm*; *0.25nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.25 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25 -[print:0.10mm 0.3nozzle] +[print:0.10mm 0.3nozzle V2] inherits = *0.10mm*; *0.3nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.3 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3 -[print:0.10mm 0.4nozzle] +[print:0.10mm 0.4nozzle V2] inherits = *0.10mm*; *0.4nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.4 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4 -[print:0.10mm 0.5nozzle] +[print:0.10mm 0.5nozzle V2] inherits = *0.10mm*; *0.5nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.5 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5 -[print:0.10mm 0.6nozzle] +[print:0.10mm 0.6nozzle V2] inherits = *0.10mm*; *0.6nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.6 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6 -[print:0.10mm 0.8nozzle] +[print:0.10mm 0.8nozzle V2] inherits = *0.10mm*; *0.8nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.8 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8 + +[print:0.10mm 0.25nozzle V0] +inherits = *0.10mm*; *0.25nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.25 + +[print:0.10mm 0.3nozzle V0] +inherits = *0.10mm*; *0.3nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3 + +[print:0.10mm 0.4nozzle V0] +inherits = *0.10mm*; *0.4nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4 + +[print:0.10mm 0.5nozzle V0] +inherits = *0.10mm*; *0.5nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5 + +[print:0.10mm 0.6nozzle V0] +inherits = *0.10mm*; *0.6nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6 +[print:0.10mm 0.8nozzle V0] +inherits = *0.10mm*; *0.8nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8 -[print:0.15mm 0.25nozzle] + +[print:0.15mm 0.25nozzle V2] inherits = *0.15mm*; *0.25nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.25 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.25 -[print:0.15mm 0.3nozzle] +[print:0.15mm 0.3nozzle V2] inherits = *0.15mm*; *0.3nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.3 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3 -[print:0.15mm 0.4nozzle] +[print:0.15mm 0.4nozzle V2] inherits = *0.15mm*; *0.4nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.4 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4 -[print:0.15mm 0.5nozzle] +[print:0.15mm 0.5nozzle V2] inherits = *0.15mm*; *0.5nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.5 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5 -[print:0.15mm 0.6nozzle] +[print:0.15mm 0.6nozzle V2] inherits = *0.15mm*; *0.6nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.6 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6 -[print:0.15mm 0.8nozzle] +[print:0.15mm 0.8nozzle V2] inherits = *0.15mm*; *0.8nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.8 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8 -[print:0.15mm 1.0nozzle] +[print:0.15mm 1.0nozzle V2] inherits = *0.15mm*; *1.0nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.0 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0 -[print:0.15mm 1.2nozzle] +[print:0.15mm 1.2nozzle V2] inherits = *0.15mm*; *1.2nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.2 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2 + +[print:0.15mm 0.25nozzle V0] +inherits = *0.15mm*; *0.25nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.25 + +[print:0.15mm 0.3nozzle V0] +inherits = *0.15mm*; *0.3nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3 + +[print:0.15mm 0.4nozzle V0] +inherits = *0.15mm*; *0.4nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4 + +[print:0.15mm 0.5nozzle V0] +inherits = *0.15mm*; *0.5nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5 +[print:0.15mm 0.6nozzle V0] +inherits = *0.15mm*; *0.6nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6 -[print:0.2mm 0.3nozzle] +[print:0.15mm 0.8nozzle V0] +inherits = *0.15mm*; *0.8nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8 + +[print:0.15mm 1.0nozzle V0] +inherits = *0.15mm*; *1.0nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0 + +[print:0.15mm 1.2nozzle V0] +inherits = *0.15mm*; *1.2nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2 + + +[print:0.2mm 0.3nozzle V2] inherits = *0.2mm*; *0.3nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.3 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.3 -[print:0.2mm 0.4nozzle] +[print:0.2mm 0.4nozzle V2] inherits = *0.2mm*; *0.4nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.4 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4 -[print:0.2mm 0.5nozzle] +[print:0.2mm 0.5nozzle V2] inherits = *0.2mm*; *0.5nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.5 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5 -[print:0.2mm 0.6nozzle] +[print:0.2mm 0.6nozzle V2] inherits = *0.2mm*; *0.6nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.6 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6 -[print:0.2mm 0.8nozzle] +[print:0.2mm 0.8nozzle V2] inherits = *0.2mm*; *0.8nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.8 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8 -[print:0.2mm 1.0nozzle] +[print:0.2mm 1.0nozzle V2] inherits = *0.2mm*; *1.0nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.0 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0 -[print:0.2mm 1.2nozzle] +[print:0.2mm 1.2nozzle V2] inherits = *0.2mm*; *1.2nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.2 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2 + +[print:0.2mm 0.3nozzle V0] +inherits = *0.2mm*; *0.3nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.3 +[print:0.2mm 0.4nozzle V0] +inherits = *0.2mm*; *0.4nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4 -[print:0.3mm 0.4nozzle] +[print:0.2mm 0.5nozzle V0] +inherits = *0.2mm*; *0.5nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5 + +[print:0.2mm 0.6nozzle V0] +inherits = *0.2mm*; *0.6nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6 + +[print:0.2mm 0.8nozzle V0] +inherits = *0.2mm*; *0.8nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8 + +[print:0.2mm 1.0nozzle V0] +inherits = *0.2mm*; *1.0nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0 + +[print:0.2mm 1.2nozzle V0] +inherits = *0.2mm*; *1.2nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2 + + +[print:0.3mm 0.4nozzle V2] inherits = *0.3mm*; *0.4nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.4 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.4 -[print:0.3mm 0.5nozzle] +[print:0.3mm 0.5nozzle V2] inherits = *0.3mm*; *0.5nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.5 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.5 -[print:0.3mm 0.6nozzle] +[print:0.3mm 0.6nozzle V2] inherits = *0.3mm*; *0.6nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.6 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6 -[print:0.3mm 0.8nozzle] +[print:0.3mm 0.8nozzle V2] inherits = *0.3mm*; *0.8nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.8 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8 -[print:0.3mm 1.0nozzle] +[print:0.3mm 1.0nozzle V2] inherits = *0.3mm*; *1.0nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.0 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0 -[print:0.3mm 1.2nozzle] +[print:0.3mm 1.2nozzle V2] inherits = *0.3mm*; *1.2nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.2 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2 + +[print:0.3mm 0.4nozzle V0] +inherits = *0.3mm*; *0.4nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.4 + +[print:0.3mm 0.5nozzle V0] +inherits = *0.3mm*; *0.5nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.5 + +[print:0.3mm 0.6nozzle V0] +inherits = *0.3mm*; *0.6nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6 + +[print:0.3mm 0.8nozzle V0] +inherits = *0.3mm*; *0.8nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8 +[print:0.3mm 1.0nozzle V0] +inherits = *0.3mm*; *1.0nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0 -[print:0.4mm 0.6nozzle] +[print:0.3mm 1.2nozzle V0] +inherits = *0.3mm*; *1.2nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2 + + +[print:0.4mm 0.6nozzle V2] inherits = *0.4mm*; *0.6nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.6 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.6 -[print:0.4mm 0.8nozzle] +[print:0.4mm 0.8nozzle V2] inherits = *0.4mm*; *0.8nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.8 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8 -[print:0.4mm 1.0nozzle] +[print:0.4mm 1.0nozzle V2] inherits = *0.4mm*; *1.0nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.0 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0 -[print:0.4mm 1.2nozzle] +[print:0.4mm 1.2nozzle V2] inherits = *0.4mm*; *1.2nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.2 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2 + +[print:0.4mm 0.6nozzle V0] +inherits = *0.4mm*; *0.6nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.6 + +[print:0.4mm 0.8nozzle V0] +inherits = *0.4mm*; *0.8nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8 + +[print:0.4mm 1.0nozzle V0] +inherits = *0.4mm*; *1.0nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0 +[print:0.4mm 1.2nozzle V0] +inherits = *0.4mm*; *1.2nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2 -[print:0.6mm 0.8nozzle] + +[print:0.6mm 0.8nozzle V2] inherits = *0.6mm*; *0.8nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==0.8 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==0.8 -[print:0.6mm 1.0nozzle] +[print:0.6mm 1.0nozzle V2] inherits = *0.6mm*; *1.0nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.0 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.0 -[print:0.6mm 1.2nozzle] +[print:0.6mm 1.2nozzle V2] inherits = *0.6mm*; *1.2nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.2 +compatible_printers_condition = printer_model=~/.*Voron_2.*/ and nozzle_diameter[0]==1.2 + +[print:0.6mm 0.8nozzle V0] +inherits = *0.6mm*; *0.8nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==0.8 + +[print:0.6mm 1.0nozzle V0] +inherits = *0.6mm*; *1.0nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.0 +[print:0.6mm 1.2nozzle V0] +inherits = *0.6mm*; *1.2nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2 -[print:0.8mm 1.2nozzle] + +[print:0.8mm 1.2nozzle V2] inherits = *0.8mm*; *1.2nozzle* -compatible_printers_condition = printer_model=~/.*Voron.*/ and nozzle_diameter[0]==1.2 +compatible_printers_condition = printer_model=~/.*Voron_v2.*/ and nozzle_diameter[0]==1.2 + +[print:0.8mm 1.2nozzle V0] +inherits = *0.8mm*; *1.2nozzle*; *zero_toolhead* +compatible_printers_condition = printer_model=~/.*Voron_v0.*/ and nozzle_diameter[0]==1.2 [filament:*common*] |