path: root/Creality.ini

# Print profiles for the Creality printers.

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Creality
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.0.12-susi
# Where to get the updates from?
config_update_url = 
# https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

# set the number of printer per line for each family
[family_size]
ENDER = 5

[printer_model:ENDER3]
name = Creality Ender-3
variants = 0.4; 0.3; 0.5; 0.6; 0.4 manual MMU
technology = FFF
family = ENDER
bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:ENDER3V2]
name = Creality Ender-3V2
variants = 0.4
technology = FFF
family = ENDER
bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:ENDER3BLTOUCH]
name = Creality Ender-3 BLTouch
variants = 0.4; 0.3; 0.5; 0.6
technology = FFF
family = ENDER
bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:ENDER5]
name = Creality Ender-5
variants = 0.4; 0.3; 0.5; 0.6
technology = FFF
family = ENDER
bed_model = ender3_bed.stl
bed_texture = ender3.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:ENDER5PLUS]
name = Creality Ender-5 Plus
variants = 0.4; 0.3; 0.5; 0.6
technology = FFF
family = ENDER
bed_model = ender5plus_bed.stl
bed_texture = ender5plus.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:ENDER2]
name = Creality Ender-2
variants = 0.4; 0.3; 0.5; 0.6
technology = FFF
family = ENDER
bed_model = ender2_bed.stl
bed_texture = ender2.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR10MINI]
name = Creality CR-10 Mini
variants = 0.4; 0.3; 0.5; 0.6
technology = FFF
family = CR10
bed_model = cr10mini_bed.stl
bed_texture = cr10mini.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR10]
name = Creality CR-10
variants = 0.4; 0.6; 0.8
technology = FFF
family = CR10
bed_model = cr10_bed.stl
bed_texture = cr10.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR10V2]
name = Creality CR-10 V2
variants = 0.4; 0.6; 0.8
technology = FFF
family = CR10
bed_model = cr10v2_bed.stl
bed_texture = cr10.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR10V3]
name = Creality CR-10 V3
variants = 0.4; 0.6; 0.8
technology = FFF
family = CR10
bed_model = cr10v2_bed.stl
bed_texture = cr10.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR10S]
name = Creality CR-10 S
variants = 0.4; 0.6; 0.8
technology = FFF
family = CR10
bed_model = cr10_bed.stl
bed_texture = cr10.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR10SPRO]
name = Creality CR-10 S Pro
variants = 0.4; 0.6; 0.8
technology = FFF
family = CR10
bed_model = cr10v2_bed.stl
bed_texture = cr10.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR10SPROV2]
name = Creality CR-10 S Pro V2
variants = 0.4; 0.6; 0.8
technology = FFF
family = CR10
bed_model = cr10v2_bed.stl
bed_texture = cr10.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR10S4]
name = Creality CR-10 S4
variants = 0.4; 0.6; 0.8
technology = FFF
family = CR10 XL
bed_model = cr10s4_bed.stl
bed_texture = cr10s4.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR10S5]
name = Creality CR-10 S5
variants = 0.4; 0.6; 0.8
technology = FFF
family = CR10 XL
bed_model = cr10s5_bed.stl
bed_texture = cr10s5.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR20]
name = Creality CR-20
variants = 0.4; 0.3; 0.5; 0.6
technology = FFF
family = CR20
bed_model = ender3_bed.stl
bed_texture = cr20.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

[printer_model:CR20PRO]
name = Creality CR-20 Pro
variants = 0.4; 0.3; 0.5; 0.6
technology = FFF
family = CR20
bed_model = ender3_bed.stl
bed_texture = cr20.svg
default_materials = Creality PLA @CREALITY; Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bottom_fill_pattern = rectilineargapfill
bridge_angle = 0
bridge_flow_ratio = 95%
bridge_speed = 25
brim_width = 0
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
dont_support_bridges = 1
ensure_vertical_shell_thickness = 1
external_perimeters_first = 0
external_perimeter_speed = 25
extra_perimeters = 0
extruder_clearance_height = 25
extruder_clearance_radius = 45
fill_angle = 45
fill_density = 20%
fill_pattern = gyroid
fill_top_flow_ratio = 100%
first_layer_height = 0.2
first_layer_size_compensation = -0.1
first_layer_speed = 20
gap_fill_speed = 30
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 50
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
overhangs_width_speed = 40%
overhangs_width = 80%
only_one_perimeter_top = 1
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
over_bridge_flow_ratio = 120%
perimeters = 2
perimeter_extruder = 1
perimeter_speed = 40
post_process = 
print_settings_id = 
raft_layers = 0
seam_position = near
seam_travel_cost = 20%
skirts = 1
skirt_distance = 2
skirt_height = 2
single_extruder_multi_material_priming = 0
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance_type = filament
support_material_contact_distance_top = 0.15
support_material_contact_distance_bottom = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_solid_first_layer = 1
support_material_spacing = 2
support_material_speed = 40
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_perimeters = 1
thin_walls = 1
thin_walls_min_width = 50%
thin_walls_overlap = 50%
top_fill_pattern = smooth
top_solid_infill_speed = 30
travel_speed = 150
wipe_tower = 1
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 160
wipe_tower_y = 160
xy_size_compensation = 0
extrusion_width = 110%
external_perimeter_extrusion_width = 105%
first_layer_extrusion_width = 140%
infill_extrusion_width = 110%
perimeter_extrusion_width = 110%
solid_infill_extrusion_width = 110%
top_infill_extrusion_width = 100%
support_material_extrusion_width = 95%

[print:*0.08mm*]
inherits = *common*
layer_height = 0.08
perimeters = 3
bottom_solid_layers = 7
top_solid_layers = 9

[print:*0.12mm*]
inherits = *common*
layer_height = 0.12
perimeters = 3
bottom_solid_layers = 6
top_solid_layers = 7

[print:*0.16mm*]
inherits = *common*
layer_height = 0.16
bottom_solid_layers = 5
top_solid_layers = 7

[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
bottom_solid_layers = 4
top_solid_layers = 5

[print:*0.24mm*]
inherits = *common*
layer_height = 0.24
top_infill_extrusion_width = 0.45
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.28mm*]
inherits = *common*
layer_height = 0.28
top_infill_extrusion_width = 0.45
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.32mm*]
inherits = *common*
layer_height = 0.32
top_infill_extrusion_width = 0.45
bottom_solid_layers = 3
top_solid_layers = 4

[print:0.8mm HIGHDETAIL @CREALITY]
inherits = *0.8mm*
compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4

[print:0.12mm DETAIL @CREALITY]
inherits = *0.12mm*
compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4

[print:0.16mm OPTIMAL @CREALITY]
inherits = *0.16mm*
compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4

[print:0.20mm NORMAL @CREALITY]
inherits = *0.20mm*
compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4

[print:0.24mm DRAFT @CREALITY]
inherits = *0.24mm*
compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4

[print:0.28mm SUPERDRAFT @CREALITY]
inherits = *0.28mm*
compatible_printers_condition = printer_model=~/(ENDER|CR).*/ and nozzle_diameter[0]==0.4

# Common filament preset
[filament:*common*]
cooling = 0
compatible_printers = 
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_max_volumetric_speed = 15
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 210
fan_always_on = 1
cooling = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 205

[filament:*PET*]
inherits = *common*
bed_temperature = 70
cooling = 1
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_max_volumetric_speed = 8
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 20
bridge_fan_speed = 100
temperature = 240

[filament:*ABS*]
inherits = *common*
bed_temperature = 100
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_max_volumetric_speed = 11
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 100
first_layer_temperature = 245
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 245

[filament:Generic PLA @CREALITY]
inherits = *PLA*
renamed_from = "Generic PLA @ENDER3"
filament_vendor = Generic

[filament:Generic PETG @CREALITY]
inherits = *PET*
renamed_from = "Generic PETG @ENDER3"
filament_vendor = Generic

[filament:Generic ABS @CREALITY]
inherits = *ABS*
renamed_from = "Generic ABS @ENDER3"
first_layer_bed_temperature = 90
bed_temperature = 90
filament_vendor = Generic

[filament:Creality PLA @CREALITY]
inherits = *PLA*
renamed_from = "Creality PLA @ENDER3"
filament_vendor = Creality
temperature = 200
bed_temperature = 60
first_layer_temperature = 205
first_layer_bed_temperature = 60
filament_colour = #42BDD8

[filament:Creality PETG @CREALITY]
inherits = *PET*
renamed_from = "Creality PETG @ENDER3"
filament_vendor = Creality
temperature = 240
bed_temperature = 70
first_layer_temperature = 240
first_layer_bed_temperature = 70
max_fan_speed = 40
min_fan_speed = 20
filament_colour = #42BDD8

[filament:Creality ABS @CREALITY]
inherits = *ABS*
renamed_from = "Creality ABS @ENDER3"
filament_vendor = Creality
temperature = 240
bed_temperature = 90
first_layer_temperature = 240
first_layer_bed_temperature = 90
filament_colour = #42BDD8

[filament:Prusament PLA @CREALITY]
inherits = *PLA*
renamed_from = "Prusament PLA @ENDER3"
filament_vendor = Prusa Polymers
temperature = 210
bed_temperature = 60
first_layer_temperature = 215
first_layer_bed_temperature = 60
filament_cost = 24.99
filament_density = 1.24
filament_colour = #F94D0C

[filament:Prusament PETG @CREALITY]
inherits = *PET*
renamed_from = "Prusament PETG @ENDER3"
filament_vendor = Prusa Polymers
temperature = 245
bed_temperature = 70
first_layer_temperature = 245
first_layer_bed_temperature = 70
filament_cost = 24.99
filament_density = 1.27
filament_colour = #F94D0C

[filament:AzureFilm PLA @CREALITY]
inherits = *PLA*
filament_vendor = AzureFilm
temperature = 210
bed_temperature = 60
first_layer_temperature = 215
first_layer_bed_temperature = 60
filament_cost = 19.97
filament_density = 1.24
filament_colour = #006AA6

[filament:Devil Design PLA @CREALITY]
inherits = *PLA*
filament_vendor = Devil Design
temperature = 215
bed_temperature = 60
first_layer_temperature = 215
first_layer_bed_temperature = 60
filament_cost = 19.00
filament_density = 1.24
filament_colour = #FF0000

[filament:Devil Design PLA (Galaxy) @CREALITY]
inherits = *PLA*
filament_vendor = Devil Design
temperature = 225
bed_temperature = 65
first_layer_temperature = 225
first_layer_bed_temperature = 65
filament_cost = 19.00
filament_density = 1.24
filament_colour = #FF0000

[filament:Extrudr PLA NX2 @CREALITY]
inherits = *PLA*
filament_vendor = Extrudr
temperature = 200
bed_temperature = 60
first_layer_temperature = 205
first_layer_bed_temperature = 60
filament_cost = 23.63
filament_density = 1.3
filament_colour = #3C4547
filament_spool_weight = 256

[filament:Real Filament PLA @CREALITY]
inherits = *PLA*
filament_vendor = Real Filament
temperature = 195
bed_temperature = 60
first_layer_temperature = 200
first_layer_bed_temperature = 60
filament_cost = 24.99
filament_density = 1.24
filament_colour = #007ABF

[filament:Velleman PLA @CREALITY]
inherits = *PLA*
filament_vendor = Velleman
temperature = 200
bed_temperature = 60
first_layer_temperature = 205
first_layer_bed_temperature = 60
filament_cost = 27.99
filament_density = 1.24
filament_colour = #7EA60D

[filament:3DJAKE ecoPLA @CREALITY]
inherits = *PLA*
filament_vendor = 3DJAKE
temperature = 200
bed_temperature = 60
first_layer_temperature = 205
first_layer_bed_temperature = 60
filament_cost = 21.99
filament_density = 1.24
filament_colour = #125467
filament_spool_weight = 238

[filament:123-3D Jupiter PLA @CREALITY]
inherits = *PLA*
filament_vendor = 123-3D
temperature = 200
bed_temperature = 60
first_layer_temperature = 205
first_layer_bed_temperature = 60
filament_cost = 19.50
filament_density = 1.24
filament_colour = #FFE200

[filament:Das Filament PLA @CREALITY]
inherits = *PLA*
filament_vendor = Das Filament
temperature = 215
bed_temperature = 50
first_layer_temperature = 215
first_layer_bed_temperature = 50
filament_cost = 20.56
filament_density = 1.24

[filament:Das Filament PETG @CREALITY]
inherits = *PET*
filament_vendor = Das Filament
temperature = 240
bed_temperature = 70
first_layer_temperature = 240
first_layer_bed_temperature = 70
filament_cost = 27.44
filament_density = 1.29

# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
between_objects_gcode = 
pause_print_gcode = 
deretract_speed = 0
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_feedrate_e = 60
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.3
min_layer_height = 0.07
max_print_height = 250
nozzle_diameter = 0.4
printer_notes = 
printer_settings_id = 
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
single_extruder_multi_material = 0
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
z_step = 0.04
printer_model = 
default_print_profile = 0.16mm OPTIMAL @CREALITY
default_filament_profile = Generic PLA @CREALITY
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0.0\nG1 Y190 E15.0 F1500.0 ; intro line\nG1 X2.3 F5000\nG1 Y10 E15.0 F1200.0 ; intro line\nG92 E0.0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y170 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors

[printer:*SmallBowden*]
inherits = *common*
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_feedrate_e = 60
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
retract_before_travel = 2
retract_length = 5
retract_speed = 60
deretract_speed = 40
retract_before_wipe = 70%
default_filament_profile = Creality PLA @CREALITY

[printer:*0.2nozzle*]
nozzle_diameter = 0.2
max_layer_height = 0.16
min_layer_height = 0.04
printer_variant = 0.2
default_print_profile = 0.12mm DETAIL @CREALITY

[printer:*0.3nozzle*]
nozzle_diameter = 0.3
max_layer_height = 0.24
min_layer_height = 0.04
printer_variant = 0.3
default_print_profile = 0.16mm OPTIMAL @CREALITY

[printer:*0.4nozzle*]
nozzle_diameter = 0.4
max_layer_height = 0.32
min_layer_height = 0.04
printer_variant = 0.4
default_print_profile = 0.20mm NORMAL @CREALITY

[printer:*0.5nozzle*]
nozzle_diameter = 0.5
max_layer_height = 0.4
min_layer_height = 0.04
printer_variant = 0.5
default_print_profile = 0.24mm DRAFT @CREALITY

[printer:*0.6nozzle*]
nozzle_diameter = 0.6
max_layer_height = 0.48
min_layer_height = 0.08
printer_variant = 0.6
default_print_profile = 0.32mm NORMAL 0.6 nozzle

[printer:*0.8nozzle*]
nozzle_diameter = 0.8
max_layer_height = 0.64
min_layer_height = 0.08
printer_variant = 0.8
default_print_profile = 0.32mm NORMAL 0.8 nozzle

[printer:*Creality Ender-3*]
inherits = *SmallBowden*
printer_model = ENDER3
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN
bed_shape = 3x3,228x3,228x228,3x228
max_print_height = 250


[printer:Creality Ender-3]
inherits = *Creality Ender-3*; *0.4nozzle*

[printer:Creality Ender-3 0.4mm (manual MMU)]
inherits = *Creality Ender-3*; *0.4nozzle*
printer_variant = 0.4 manual MMU
nozzle_diameter = 0.4,0.4,0.4
retract_speed = 80
default_print_profile = 0.16mm NORMAL 0.4 nozzle
default_filament_profile = Creality PLA
single_extruder_multi_material = 1
toolchange_gcode = M104 S{temperature[next_extruder]}\nM600
retract_layer_change = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
parking_pos_retraction = 200
cooling_tube_length = 10
cooling_tube_retraction = 100

[printer:Creality Ender-3 0.3mm]
inherits = *Creality Ender-3*; *0.3nozzle*

[printer:Creality Ender-3 0.5mm]
inherits = *Creality Ender-3*; *0.5nozzle*

[printer:Creality Ender-3 0.6mm]
inherits = *Creality Ender-3*; *0.6nozzle*

[printer:Creality Ender-3V2]
inherits = Creality Ender-3
printer_model = ENDER3V2
printer_variant = 0.4
bed_shape = 0x0,220x0,220x220,0x220

[printer:*fastabl*]
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0

[printer:*slowabl*]
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set extruder temp for auto bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG1 Z0.28 F240\nG92 E0\nG1 Y190 E15 F1500 ; intro line\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E15 F1200 ; intro line\nG92 E0

[printer:*invertedz*]
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed down further down\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors

[printer:*Creality Ender-3 BLTouch*]
inherits = *SmallBowden*; *fastabl*
printer_model = ENDER3BLTOUCH
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN

[printer:Creality Ender-3 BLTouch 0.4mm]
inherits = *Creality Ender-3 BLTouch*; *0.4nozzle*

[printer:Creality Ender-3 BLTouch 0.3mm]
inherits = *Creality Ender-3 BLTouch*; *0.3nozzle*

[printer:Creality Ender-3 BLTouch 0.5mm]
inherits = *Creality Ender-3 BLTouch*; *0.5nozzle*

[printer:Creality Ender-3 BLTouch 0.6mm]
inherits = *Creality Ender-3 BLTouch*; *0.6nozzle*

[printer:*Creality Ender-5*]
inherits = *SmallBowden*; *invertedz*
retract_length = 6
bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
printer_model = ENDER5
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5\nPRINTER_HAS_BOWDEN
max_print_height = 300
machine_max_acceleration_e = 1000
machine_max_feedrate_z = 5

[printer:Creality Ender-5 0.4mm]
inherits = *Creality Ender-5*; *0.4nozzle*

[printer:Creality Ender-5 0.3mm]
inherits = *Creality Ender-5*; *0.3nozzle*

[printer:Creality Ender-5 0.5mm]
inherits = *Creality Ender-5*; *0.5nozzle*

[printer:Creality Ender-5 0.6mm]
inherits = *Creality Ender-5*; *0.6nozzle*

[printer:*Creality Ender-5 Plus*]
inherits = *SmallBowden*; *slowabl*; *invertedz*
retract_length = 6
bed_shape = 5x5,355x5,355x355,5x355
printer_model = ENDER5PLUS
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5PLUS\nPRINTER_HAS_BOWDEN
max_print_height = 400
machine_max_acceleration_e = 1000
machine_max_feedrate_z = 5
machine_max_feedrate_x = 300
machine_max_feedrate_y = 300

[printer:Creality Ender-5 Plus 0.4mm]
inherits = *Creality Ender-5 Plus*; *0.4nozzle*

[printer:Creality Ender-5 Plus 0.3mm]
inherits = *Creality Ender-5 Plus*; *0.3nozzle*

[printer:Creality Ender-5 Plus 0.5mm]
inherits = *Creality Ender-5 Plus*; *0.5nozzle*

[printer:Creality Ender-5 Plus 0.6mm]
inherits = *Creality Ender-5 Plus*; *0.6nozzle*

[printer:*Creality Ender-2*]
inherits = *SmallBowden*
bed_shape = 0x0,150x0,150x150,0x150
printer_model = ENDER2
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER2\nPRINTER_HAS_BOWDEN
max_print_height = 200
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for extruder temp\nG28 ; home all\nG1 Z2 F240\nG1 X2 Y10 F3000\nG1 Z0.28 F240\nG92 E0\nG1 X15 Y135 E15 F1500 ; intro line\nG1 X2.3 F5000\nG1 Y10 E15 F1200 ; intro line\nG92 E0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print head up\nG1 X5 Y140 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+30, max_print_height-10)} F600{endif} ; Move print head further up\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors

[printer:Creality Ender-2 0.4mm]
inherits = *Creality Ender-2*; *0.4nozzle*
renamed_from = "Creality ENDER-2"

[printer:Creality Ender-2 0.3mm]
inherits = *Creality Ender-2*; *0.3nozzle*

[printer:Creality Ender-2 0.5mm]
inherits = *Creality Ender-2*; *0.5nozzle*

[printer:Creality Ender-2 0.6mm]
inherits = *Creality Ender-2*; *0.6nozzle*

[printer:*Creality CR-10 Mini*]
inherits = *SmallBowden*
retract_length = 6
bed_shape = 2.5x5,2.5x225,302.5x225,302.5x5
printer_model = CR10MINI
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10MINI\nPRINTER_HAS_BOWDEN
max_print_height = 300

[printer:Creality CR-10 Mini 0.4mm]
inherits = *Creality CR-10 Mini*; *0.4nozzle*

[printer:Creality CR-10 Mini 0.3mm]
inherits = *Creality CR-10 Mini*; *0.3nozzle*

[printer:Creality CR-10 Mini 0.5mm]
inherits = *Creality CR-10 Mini*; *0.5nozzle*

[printer:Creality CR-10 Mini 0.6mm]
inherits = *Creality CR-10 Mini*; *0.6nozzle*

[printer:*Creality CR-10*]
inherits = *SmallBowden*
retract_length = 6
bed_shape = 5x5,305x5,305x305,5x305
printer_model = CR10
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10\nPRINTER_HAS_BOWDEN
max_print_height = 400

[printer:Creality CR-10 0.4mm]
inherits = *Creality CR-10*; *0.4nozzle*

[printer:Creality CR-10 0.6mm]
inherits = *Creality CR-10*; *0.6nozzle*

[printer:Creality CR-10 0.8mm]
inherits = *Creality CR-10*; *0.8nozzle*

[printer:*Creality CR-10 V2*]
inherits = *SmallBowden*
retract_length = 6
bed_shape = 5x5,305x5,305x305,5x305
printer_model = CR10V2
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10V2\nPRINTER_HAS_BOWDEN
max_print_height = 400

[printer:Creality CR-10 V2 0.4mm]
inherits = *Creality CR-10 V2*; *0.4nozzle*

[printer:Creality CR-10 V2 0.6mm]
inherits = *Creality CR-10 V2*; *0.6nozzle*

[printer:Creality CR-10 V2 0.8mm]
inherits = *Creality CR-10 V2*; *0.8nozzle*

[printer:*Creality CR-10 V3*]
inherits = *SmallBowden*
retract_length = 1
bed_shape = 5x5,305x5,305x305,5x305
printer_model = CR10V3
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10V3
max_print_height = 400

[printer:Creality CR-10 V3 0.4mm]
inherits = *Creality CR-10 V3*; *0.4nozzle*

[printer:Creality CR-10 V3 0.6mm]
inherits = *Creality CR-10 V3*; *0.6nozzle*

[printer:Creality CR-10 V3 0.8mm]
inherits = *Creality CR-10 V3*; *0.8nozzle*

[printer:*Creality CR-10 S*]
inherits = *SmallBowden*
retract_length = 6
bed_shape = 5x5,305x5,305x305,5x305
printer_model = CR10S
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S\nPRINTER_HAS_BOWDEN
max_print_height = 400

[printer:Creality CR-10 S 0.4mm]
inherits = *Creality CR-10 S*; *0.4nozzle*

[printer:Creality CR-10 S 0.6mm]
inherits = *Creality CR-10 S*; *0.6nozzle*

[printer:Creality CR-10 S 0.8mm]
inherits = *Creality CR-10 S*; *0.8nozzle*

[printer:*Creality CR-10 S Pro*]
inherits = *SmallBowden*; *slowabl*
retract_length = 6
bed_shape = 0x0,300x0,300x300,0x300
printer_model = CR10SPRO
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPRO\nPRINTER_HAS_BOWDEN
max_print_height = 400

[printer:Creality CR-10 S Pro 0.4mm]
inherits = *Creality CR-10 S Pro*; *0.4nozzle*

[printer:Creality CR-10 S Pro 0.6mm]
inherits = *Creality CR-10 S Pro*; *0.6nozzle*

[printer:Creality CR-10 S Pro 0.8mm]
inherits = *Creality CR-10 S Pro*; *0.8nozzle*

[printer:*Creality CR-10 S Pro V2*]
inherits = *SmallBowden*; *slowabl*
retract_length = 6
bed_shape = 5x5,305x5,305x305,5x305
printer_model = CR10SPROV2
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SPROV2\nPRINTER_HAS_BOWDEN
max_print_height = 400

[printer:Creality CR-10 S Pro V2 0.4mm]
inherits = *Creality CR-10 S Pro V2*; *0.4nozzle*

[printer:Creality CR-10 S Pro V2 0.6mm]
inherits = *Creality CR-10 S Pro V2*; *0.6nozzle*

[printer:Creality CR-10 S Pro V2 0.8mm]
inherits = *Creality CR-10 S Pro V2*; *0.8nozzle*

[printer:*Creality CR-10 S4*]
inherits = *SmallBowden*
retract_length = 6
bed_shape = 5x5,405x5,405x405,5x405
printer_model = CR10S4
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S4\nPRINTER_HAS_BOWDEN
max_print_height = 400

[printer:Creality CR-10 S4 0.4mm]
inherits = *Creality CR-10 S4*; *0.4nozzle*

[printer:Creality CR-10 S4 0.6mm]
inherits = *Creality CR-10 S4*; *0.6nozzle*

[printer:Creality CR-10 S4 0.8mm]
inherits = *Creality CR-10 S4*; *0.8nozzle*

[printer:*Creality CR-10 S5*]
inherits = *SmallBowden*
retract_length = 6
bed_shape = 5x5,505x5,505x505,5x505
printer_model = CR10S5
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S5\nPRINTER_HAS_BOWDEN
max_print_height = 500

[printer:Creality CR-10 S5 0.4mm]
inherits = *Creality CR-10 S5*; *0.4nozzle*

[printer:Creality CR-10 S5 0.6mm]
inherits = *Creality CR-10 S5*; *0.6nozzle*

[printer:Creality CR-10 S5 0.8mm]
inherits = *Creality CR-10 S5*; *0.8nozzle*
printer_model = CR10S5
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10S5\nPRINTER_HAS_BOWDEN
max_print_height = 500

[printer:*Creality CR-20*]
inherits = *SmallBowden*
printer_model = CR20
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR20\nPRINTER_HAS_BOWDEN

[printer:Creality CR-20 0.4mm]
inherits = *Creality CR-20*; *0.4nozzle*

[printer:Creality CR-20 0.3mm]
inherits = *Creality CR-20*; *0.3nozzle*

[printer:Creality CR-20 0.5mm]
inherits = *Creality CR-20*; *0.5nozzle*

[printer:Creality CR-20 0.6mm]
inherits = *Creality CR-20*; *0.6nozzle*

[printer:*Creality CR-20 Pro*]
inherits = *SmallBowden*; *fastabl*
retract_length = 4
printer_model = CR20PRO
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR20PRO\nPRINTER_HAS_BOWDEN

[printer:Creality CR-20 Pro 0.4mm]
inherits = *Creality CR-20 Pro*; *0.4nozzle*

[printer:Creality CR-20 Pro 0.3mm]
inherits = *Creality CR-20 Pro*; *0.3nozzle*

[printer:Creality CR-20 Pro 0.5mm]
inherits = *Creality CR-20 Pro*; *0.5nozzle*

[printer:Creality CR-20 Pro 0.6mm]
inherits = *Creality CR-20 Pro*; *0.6nozzle*