path: root/LulzBot.ini

# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC

[vendor]
# Vendor name will be shown by the Config Wizard.
name = LulzBot
config_version = 0.0.4-susi2
config_update_url = 
#https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/

[printer_model:MINI_AERO]
name = Mini Aero
variants = 0.5
technology = FFF
#bed_model = mini_bed.stl
#bed_texture = mini.svg
default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot

[printer_model:TAZ6_AERO]
name = Taz6 Aero
variants = 0.5
technology = FFF
default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot

[print:0.3mm @lulzbot]
avoid_crossing_perimeters = 0
bottom_fill_pattern = rectilinear
bottom_solid_layers = 3
bridge_acceleration = 500
bridge_angle = 0
bridge_flow_ratio = 100%
bridge_speed = 30
brim_width = 0
clip_multipart_objects = 0
compatible_printers = 
compatible_printers_condition = 
complete_objects = 0
default_acceleration = 500
dont_support_bridges = 1
first_layer_size_compensation = 0
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0.56
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.56
fill_angle = 45
fill_density = 20%
fill_pattern = gyroid
first_layer_acceleration = 500
first_layer_extrusion_width = 0.6
first_layer_height = 50%
first_layer_speed = 40%
first_layer_infill_speed = 40%
gap_fill_speed = 20
gcode_comments = 0
gcode_label_objects = 0
infill_acceleration = 500
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.56
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
inherits = 
interface_shells = 0
layer_height = 0.3
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 0
notes = 
only_one_perimeter_top = 1
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode
overhangs_width_speed = 50%
overhangs_width = 75%
perimeter_acceleration = 500
perimeter_extruder = 1
perimeter_extrusion_width = 0.56
perimeter_speed = 60
perimeters = 3
post_process = 
raft_layers = 0
seam_position = cost
seam_angle_cost = 80%
seam_travel_cost = 20%
single_extruder_multi_material_priming = 1
skirt_distance = 3
skirt_height = 1
skirts = 3
slice_closing_radius = 0.049
small_perimeter_speed = 15
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.56
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance_type = filament
support_material_contact_distance_top = 0.2
support_material_contact_distance_bottom = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.44
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 60
support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 1
support_material_xy_spacing = 50%
thin_perimeters = 1
thin_walls = 1
thin_walls_min_width = 50%
thin_walls_overlap = 50%
threads = 12
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.52
top_solid_infill_speed = 40
top_solid_layers = 3
travel_speed = 175
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
extrusion_spacing =
perimeter_extrusion_spacing =
external_perimeter_extrusion_spacing =
first_layer_extrusion_spacing =
infill_extrusion_spacing =
solid_infill_extrusion_spacing =
top_infill_extrusion_spacing =

[filament:ColorFabb PLA-PHA @lulzbot]
filament_vendor = ColorFabb
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #29B2B2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 0
filament_density = 1.25
filament_deretract_speed = nil
filament_diameter = 2.85
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_soluble = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_wipe = nil
first_layer_bed_temperature = 60
first_layer_temperature = 200
inherits = 
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; Filament gcode\n"
temperature = 200

[filament:PrintedSolid Jesse PLA @lulzbot]
filament_vendor = PrintedSolid
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers = 
compatible_printers_condition = 
compatible_prints = 
compatible_prints_condition = 
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 60
filament_colour = #29B2B2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 27
filament_density = 1.25
filament_deretract_speed = nil
filament_diameter = 2.85
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_soluble = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_wipe = nil
first_layer_bed_temperature = 60
first_layer_temperature = 220
inherits = 
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
slowdown_below_layer_time = 5
start_filament_gcode = "; Filament gcode\n"
temperature = 220

[printer:Mini Aero 0.5mm]
printer_model = MINI_AERO
printer_variant = 0.5
default_print_profile = 0.3mm @lulzbot
default_filament_profile = PrintedSolid Jesse PLA @lulzbot
bed_shape = 0x0,154x0,154x154,0x154
before_layer_gcode = 
between_objects_gcode = 
cooling_tube_length = 5
cooling_tube_retraction = 91.5
deretract_speed = 20
end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG92 E1                                    ; set extruder to 1mm for retract on print end (LulzBot Cura had 5mm, might be a contributing factor to between print Aerostruder jamming)\nM117 Cooling please wait                  ; progress indicator message on LCD\nG1 X5 Y5 Z158 E0 F10000                   ; move to cooling position\nG1 E1                                     ; re-prime extruder\nM190 R40 ; wait for bed to cool down to removal temp\nM77					  ; Stop GLCD Timer\nG1 X145 F1000                             ; move extruder out of the way\nG1 Y175 F1000                             ; present finished print\nM140 S0; cool downs\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
extra_loading_move = -2
extruder_colour = ""
extruder_offset = 0x0
gcode_flavor = marlin
high_current_on_filament_swap = 0
inherits = 
layer_gcode = 
machine_max_acceleration_e = 10000,5000
machine_max_acceleration_extruding = 1500,1250
machine_max_acceleration_retracting = 1500,1250
machine_max_acceleration_x = 9000,1000
machine_max_acceleration_y = 9000,1000
machine_max_acceleration_z = 100,200
machine_max_feedrate_e = 40,120
machine_max_feedrate_x = 800,200
machine_max_feedrate_y = 800,200
machine_max_feedrate_z = 8,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 20,10
machine_max_jerk_y = 20,10
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0
max_print_height = 158
min_layer_height = 0.07
nozzle_diameter = 0.5
parking_pos_retraction = 92
printer_notes = LulzBot Mini w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
remaining_times = 0
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29       ; start auto-leveling sequence\nM420 S1   ; enable leveling matrix\nM425 Z    ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier.
thumbnails = 
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0

[printer:Taz6 Aero 0.5mm]
printer_model = TAZ6_AERO
printer_variant = 0.5
default_print_profile = 0.3mm @lulzbot
default_filament_profile = PrintedSolid Jesse PLA @lulzbot
bed_shape = 0x0,280x0,280x280,0x280
before_layer_gcode = 
between_objects_gcode = 
cooling_tube_length = 5
cooling_tube_retraction = 91.5
deretract_speed = 20
end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG91                                       ; relative positioning\nG1 E-1 F300                               ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000                ; lift up and retract even more filament\nG1 E6                                     ; re-prime extruder\nM117 Cooling please wait                  ; progress indicator message on LCD\nG90                                       ; absolute positioning\nG1 Y0 F3000                               ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000                             ; present finished print\nM140 S0; cool downs\nM77					  ; stop GLCD timer\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
extra_loading_move = -2
extruder_colour = ""
extruder_offset = 0x0
gcode_flavor = marlin
high_current_on_filament_swap = 0
inherits = 
layer_gcode = 
machine_max_acceleration_e = 1000,5000
machine_max_acceleration_extruding = 1000,1250
machine_max_acceleration_retracting = 1000,1250
machine_max_acceleration_x = 9000,1000
machine_max_acceleration_y = 9000,1000
machine_max_acceleration_z = 100,200
machine_max_feedrate_e = 40,120
machine_max_feedrate_x = 800,200
machine_max_feedrate_y = 800,200
machine_max_feedrate_z = 3,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 12,10
machine_max_jerk_y = 12,10
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0
max_print_height = 250
min_layer_height = 0.07
nozzle_diameter = 0.5
parking_pos_retraction = 92
printer_notes = LulzBot Taz 6 w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
printer_technology = FFF
remaining_times = 0
retract_before_travel = 2
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 2
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 40
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29          ; start auto-leveling sequence\nM420 S1      ; enable leveling matrix\nM425 Z       ; use measured Z backlash for compensation\nM425 Z F0    ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n
thumbnails = 
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0