v2.15.1

- **(Improvement) CWS:**
   - Remove light-off delay from the format
   - Sync movements with a delay time
   - Auto convert the light-off delay time to wait before cure time when required
- **(Improvement) CTB:**
   - When positively set the 'Wait time before cure' property on a CTBv3 or lower, it will compute the right light-off delay with that extra time into consideration
   - When positively set any of the light-off delays on a CTBv4 it will auto zero the 'Wait times' properties and vice-versa
   - Automation to set light-off delay on file load, will no longer do when any of 'Wait times' are defined for a CTBv4
- (Improvement) PrusaSlicer printers that use .cws format, implement the wait times on printer notes
- (Fix) GCode parser: Commented commands were being parsed
- (Fix) Exposure time information on bottom status bar was inverted, showing normal/bottom time instead of bottom/normal
- (Fix) macOS: Installing libusb is no longer a requirement

4 files changed, 8 insertions, 8 deletions

diff --git a/PrusaSlicer/printer/Nova3D Bene4 Mono.ini b/PrusaSlicer/printer/Nova3D Bene4 Mono.ini
index 9c10514..3899d99 100644
--- a/PrusaSlicer/printer/Nova3D Bene4 Mono.ini
+++ b/PrusaSlicer/printer/Nova3D Bene4 Mono.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.1+win64 on 2021-04-29 at 17:56:19 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-07-24 at 01:01:47 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -26,7 +26,7 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_NOVA3D\nPRINTER_MODEL_BENE4_MONO\nFILEFORMAT_RGB.CWS\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_120\nLiftSpeed_120\nRetractSpeed_120\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_NOVA3D\nPRINTER_MODEL_BENE4_MONO\nFILEFORMAT_RGB.CWS\n\nSTART_CUSTOM_VALUES\nBottomWaitBeforeCure_3\nWaitBeforeCure_2.5\nBottomWaitAfterCure_3\nWaitAfterCure_1\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_120\nLiftSpeed_120\nBottomWaitAfterLift_0\nWaitAfterLift_0\nRetractSpeed_120\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
diff --git a/PrusaSlicer/printer/Nova3D Elfin.ini b/PrusaSlicer/printer/Nova3D Elfin.ini
index 336c23b..bbf3d07 100644
--- a/PrusaSlicer/printer/Nova3D Elfin.ini
+++ b/PrusaSlicer/printer/Nova3D Elfin.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:35:32 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-07-24 at 01:02:10 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -26,7 +26,7 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_NOVA3D\nPRINTER_MODEL_ELFIN\nFILEFORMAT_CWS\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_120\nLiftSpeed_120\nRetractSpeed_120\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_NOVA3D\nPRINTER_MODEL_ELFIN\nFILEFORMAT_CWS\n\nSTART_CUSTOM_VALUES\nBottomWaitBeforeCure_3\nWaitBeforeCure_2.5\nBottomWaitAfterCure_3\nWaitAfterCure_1\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_120\nLiftSpeed_120\nBottomWaitAfterLift_0\nWaitAfterLift_0\nRetractSpeed_120\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
diff --git a/PrusaSlicer/printer/Phrozen Sonic Mini.ini b/PrusaSlicer/printer/Phrozen Sonic Mini.ini
index bb8a159..39c3a6f 100644
--- a/PrusaSlicer/printer/Phrozen Sonic Mini.ini
+++ b/PrusaSlicer/printer/Phrozen Sonic Mini.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-21 at 18:54:48 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-07-21 at 02:49:31 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -26,7 +26,7 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_PHROZEN\nPRINTER_MODEL_SONIC_MINI\nFILEFORMAT_PHZ\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_8\nLiftHeight_6\nBottomLiftSpeed_100\nLiftSpeed_100\nRetractSpeed_200\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_PHROZEN\nPRINTER_MODEL_SONIC_MINI\nFILEFORMAT_PHZ\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_100\nLiftSpeed_150\nRetractSpeed_200\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
diff --git a/PrusaSlicer/printer/Wanhao D7.ini b/PrusaSlicer/printer/Wanhao D7.ini
index e8b4733..f05b95a 100644
--- a/PrusaSlicer/printer/Wanhao D7.ini
+++ b/PrusaSlicer/printer/Wanhao D7.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-04-09 at 19:00:09 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-07-24 at 01:02:43 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -26,7 +26,7 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_WANHAO\nPRINTER_MODEL_D7\nFILEFORMAT_XML.CWS\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_60\nLiftSpeed_60\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_WANHAO\nPRINTER_MODEL_D7\nFILEFORMAT_XML.CWS\n\nSTART_CUSTOM_VALUES\nBottomWaitBeforeCure_3\nWaitBeforeCure_2.5\nBottomWaitAfterCure_3\nWaitAfterCure_1\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_60\nLiftSpeed_60\nBottomWaitAfterLift_0\nWaitAfterLift_0\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default