diff options
author | Tiago Conceição <Tiago_caza@hotmail.com> | 2021-12-07 02:06:03 +0300 |
---|---|---|
committer | Tiago Conceição <Tiago_caza@hotmail.com> | 2021-12-07 02:06:03 +0300 |
commit | 3577589fd974c47ab29bf51fc5832c2ecf66a4ee (patch) | |
tree | f24b658b157b6b9faff24621e1f22fe7ea2b6e34 /PrusaSlicer | |
parent | 1e3f701a286ed86591327016931c97aca5ba55dc (diff) |
v2.26.0v2.26.0
- **File formats - Photon Workshop: (#360)**
- (Add) Allow to globally edit bottom lift height and bottom lift speed
- (Add) Support for file version 515, 516 and TSMC
- (Add) AnyCubic Photon Ultra (DLP)
- (Add) AnyCubic Photon Mono SQ (PMSQ)
- (Add) AnyCubic Photon Mono 4K (PMSA)
- (Add) AnyCubic Photon Mono X 6K (PMSB)
- **PrusaSlicer printers:**
- (Add) AnyCubic Photon Mono 4K
- (Add) Photon Mono X 6K
- (Add) PrusaSlicer profiles manager: Allow to install profiles into SuperSlicer (#355)
- (Fix) CTBv4: Setting the LiftHeight2 was defining the base.LiftHeight2 to BottomLiftHeight2
- (Fix) CWS: Typo on the "resolution must be multiple of 3" error
Diffstat (limited to 'PrusaSlicer')
-rw-r--r-- | PrusaSlicer/printer/AnyCubic Photon Mono 4K.ini | 38 | ||||
-rw-r--r-- | PrusaSlicer/printer/AnyCubic Photon Mono SE.ini | 4 | ||||
-rw-r--r-- | PrusaSlicer/printer/AnyCubic Photon Mono SQ.ini | 4 | ||||
-rw-r--r-- | PrusaSlicer/printer/AnyCubic Photon Mono X 6K.ini | 38 | ||||
-rw-r--r-- | PrusaSlicer/printer/AnyCubic Photon Mono X.ini | 4 | ||||
-rw-r--r-- | PrusaSlicer/printer/AnyCubic Photon Mono.ini | 4 | ||||
-rw-r--r-- | PrusaSlicer/printer/AnyCubic Photon S.ini | 4 | ||||
-rw-r--r-- | PrusaSlicer/printer/AnyCubic Photon Ultra.ini | 4 | ||||
-rw-r--r-- | PrusaSlicer/printer/AnyCubic Photon X.ini | 4 | ||||
-rw-r--r-- | PrusaSlicer/printer/AnyCubic Photon Zero.ini | 4 |
10 files changed, 92 insertions, 16 deletions
diff --git a/PrusaSlicer/printer/AnyCubic Photon Mono 4K.ini b/PrusaSlicer/printer/AnyCubic Photon Mono 4K.ini new file mode 100644 index 0000000..c797db1 --- /dev/null +++ b/PrusaSlicer/printer/AnyCubic Photon Mono 4K.ini @@ -0,0 +1,38 @@ +# generated by PrusaSlicer 2.3.3+win64 on 2021-12-06 at 03:22:23 UTC +absolute_correction = 0 +area_fill = 50 +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,132.9x0,132.9x80,0x80 +default_sla_material_profile = Prusa Orange Tough 0.05 +default_sla_print_profile = 0.05 Normal +display_height = 80 +display_mirror_x = 1 +display_mirror_y = 0 +display_orientation = landscape +display_pixels_x = 3840 +display_pixels_y = 2400 +display_width = 132.9 +elefant_foot_compensation = 0.2 +elefant_foot_min_width = 0.2 +fast_tilt_time = 5 +gamma_correction = 1 +host_type = octoprint +inherits = Original Prusa SL1 +max_exposure_time = 120 +max_initial_exposure_time = 300 +max_print_height = 165 +min_exposure_time = 1 +min_initial_exposure_time = 1 +print_host = +printer_model = SL1 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO_4K\nFILEFORMAT_PWMA\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nBottomLiftHeight_6\nLiftHeight_6\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES +printer_settings_id = +printer_technology = SLA +printer_variant = default +printer_vendor = +printhost_apikey = +printhost_cafile = +relative_correction = 1,1 +slow_tilt_time = 8 +thumbnails = 400x400,800x480 diff --git a/PrusaSlicer/printer/AnyCubic Photon Mono SE.ini b/PrusaSlicer/printer/AnyCubic Photon Mono SE.ini index 3318815..ed8287e 100644 --- a/PrusaSlicer/printer/AnyCubic Photon Mono SE.ini +++ b/PrusaSlicer/printer/AnyCubic Photon Mono SE.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:41:49 UTC +# generated by PrusaSlicer 2.3.3+win64 on 2021-12-06 at 03:22:28 UTC absolute_correction = 0 area_fill = 50 bed_custom_model = @@ -26,7 +26,7 @@ min_exposure_time = 1 min_initial_exposure_time = 1 print_host = printer_model = SL1 -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO_SE\nFILEFORMAT_PWMS\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_6\nLiftHeight_6\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO_SE\nFILEFORMAT_PWMS\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nBottomLiftHeight_6\nLiftHeight_6\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES printer_settings_id = printer_technology = SLA printer_variant = default diff --git a/PrusaSlicer/printer/AnyCubic Photon Mono SQ.ini b/PrusaSlicer/printer/AnyCubic Photon Mono SQ.ini index b0f9c9b..e151aa6 100644 --- a/PrusaSlicer/printer/AnyCubic Photon Mono SQ.ini +++ b/PrusaSlicer/printer/AnyCubic Photon Mono SQ.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.1+win64 on 2021-08-23 at 15:24:23 UTC +# generated by PrusaSlicer 2.3.3+win64 on 2021-12-06 at 03:22:33 UTC absolute_correction = 0 area_fill = 50 bed_custom_model = @@ -26,7 +26,7 @@ min_exposure_time = 1 min_initial_exposure_time = 1 print_host = printer_model = SL1 -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO_SQ\nFILEFORMAT_PMSQ\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO_SQ\nFILEFORMAT_PMSQ\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES printer_settings_id = printer_technology = SLA printer_variant = default diff --git a/PrusaSlicer/printer/AnyCubic Photon Mono X 6K.ini b/PrusaSlicer/printer/AnyCubic Photon Mono X 6K.ini new file mode 100644 index 0000000..db0b7c6 --- /dev/null +++ b/PrusaSlicer/printer/AnyCubic Photon Mono X 6K.ini @@ -0,0 +1,38 @@ +# generated by PrusaSlicer 2.3.3+win64 on 2021-12-06 at 03:22:41 UTC +absolute_correction = 0 +area_fill = 50 +bed_custom_model = +bed_custom_texture = +bed_shape = 0x0,197x0,197x122.8,0x122.8 +default_sla_material_profile = Prusa Orange Tough 0.05 +default_sla_print_profile = 0.05 Normal +display_height = 122.8 +display_mirror_x = 1 +display_mirror_y = 0 +display_orientation = landscape +display_pixels_x = 5760 +display_pixels_y = 3600 +display_width = 197 +elefant_foot_compensation = 0.2 +elefant_foot_min_width = 0.2 +fast_tilt_time = 5 +gamma_correction = 1 +host_type = octoprint +inherits = Original Prusa SL1 +max_exposure_time = 120 +max_initial_exposure_time = 300 +max_print_height = 245 +min_exposure_time = 1 +min_initial_exposure_time = 1 +print_host = +printer_model = SL1 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO_X_6K\nFILEFORMAT_PWMB\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_120\nLiftSpeed_120\nRetractSpeed_120\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES +printer_settings_id = +printer_technology = SLA +printer_variant = default +printer_vendor = +printhost_apikey = +printhost_cafile = +relative_correction = 1,1 +slow_tilt_time = 8 +thumbnails = 400x400,800x480 diff --git a/PrusaSlicer/printer/AnyCubic Photon Mono X.ini b/PrusaSlicer/printer/AnyCubic Photon Mono X.ini index 7c1c19c..26f4de0 100644 --- a/PrusaSlicer/printer/AnyCubic Photon Mono X.ini +++ b/PrusaSlicer/printer/AnyCubic Photon Mono X.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:41:30 UTC +# generated by PrusaSlicer 2.3.3+win64 on 2021-12-06 at 03:22:37 UTC absolute_correction = 0 area_fill = 50 bed_custom_model = @@ -26,7 +26,7 @@ min_exposure_time = 1 min_initial_exposure_time = 1 print_host = printer_model = SL1 -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO_X\nFILEFORMAT_PWMX\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_120\nLiftSpeed_120\nRetractSpeed_120\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO_X\nFILEFORMAT_PWMX\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_120\nLiftSpeed_120\nRetractSpeed_120\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES printer_settings_id = printer_technology = SLA printer_variant = default diff --git a/PrusaSlicer/printer/AnyCubic Photon Mono.ini b/PrusaSlicer/printer/AnyCubic Photon Mono.ini index 9df8b45..8e96119 100644 --- a/PrusaSlicer/printer/AnyCubic Photon Mono.ini +++ b/PrusaSlicer/printer/AnyCubic Photon Mono.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:42:13 UTC +# generated by PrusaSlicer 2.3.3+win64 on 2021-12-06 at 03:22:18 UTC absolute_correction = 0 area_fill = 50 bed_custom_model = @@ -26,7 +26,7 @@ min_exposure_time = 1 min_initial_exposure_time = 1 print_host = printer_model = SL1 -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO\nFILEFORMAT_PWMO\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_6\nLiftHeight_6\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_MONO\nFILEFORMAT_PWMO\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nBottomLiftHeight_6\nLiftHeight_6\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES printer_settings_id = printer_technology = SLA printer_variant = default diff --git a/PrusaSlicer/printer/AnyCubic Photon S.ini b/PrusaSlicer/printer/AnyCubic Photon S.ini index e5fdb20..e546fab 100644 --- a/PrusaSlicer/printer/AnyCubic Photon S.ini +++ b/PrusaSlicer/printer/AnyCubic Photon S.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:41:23 UTC +# generated by PrusaSlicer 2.3.3+win64 on 2021-12-06 at 03:22:49 UTC absolute_correction = 0 area_fill = 50 bed_custom_model = @@ -26,7 +26,7 @@ min_exposure_time = 1 min_initial_exposure_time = 1 print_host = printer_model = SL1 -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_S\nFILEFORMAT_PWS\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nLiftHeight_6\nLiftSpeed_60\nRetractSpeed_150\nEND_CUSTOM_VALUES +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_S\nFILEFORMAT_PWS\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nLiftHeight_6\nLiftSpeed_60\nRetractSpeed_150\nEND_CUSTOM_VALUES printer_settings_id = printer_technology = SLA printer_variant = default diff --git a/PrusaSlicer/printer/AnyCubic Photon Ultra.ini b/PrusaSlicer/printer/AnyCubic Photon Ultra.ini index 41b441c..ad56617 100644 --- a/PrusaSlicer/printer/AnyCubic Photon Ultra.ini +++ b/PrusaSlicer/printer/AnyCubic Photon Ultra.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.1+win64 on 2021-08-23 at 15:46:01 UTC +# generated by PrusaSlicer 2.3.3+win64 on 2021-12-06 at 03:22:53 UTC absolute_correction = 0 area_fill = 50 bed_custom_model = @@ -26,7 +26,7 @@ min_exposure_time = 1 min_initial_exposure_time = 1 print_host = printer_model = SL1 -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_ULTRA\nFILEFORMAT_DLP\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_6\nLiftHeight_5\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_ULTRA\nFILEFORMAT_DLP\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nBottomLiftHeight_6\nLiftHeight_5\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES printer_settings_id = printer_technology = SLA printer_variant = default diff --git a/PrusaSlicer/printer/AnyCubic Photon X.ini b/PrusaSlicer/printer/AnyCubic Photon X.ini index 963f5ee..c20e937 100644 --- a/PrusaSlicer/printer/AnyCubic Photon X.ini +++ b/PrusaSlicer/printer/AnyCubic Photon X.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:41:05 UTC +# generated by PrusaSlicer 2.3.3+win64 on 2021-12-06 at 03:22:58 UTC absolute_correction = 0 area_fill = 50 bed_custom_model = @@ -26,7 +26,7 @@ min_exposure_time = 1 min_initial_exposure_time = 1 print_host = printer_model = SL1 -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_X\nFILEFORMAT_PWX\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_X\nFILEFORMAT_PWX\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nBottomLiftHeight_8\nLiftHeight_8\nBottomLiftSpeed_150\nLiftSpeed_150\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES printer_settings_id = printer_technology = SLA printer_variant = default diff --git a/PrusaSlicer/printer/AnyCubic Photon Zero.ini b/PrusaSlicer/printer/AnyCubic Photon Zero.ini index dde504d..b2bcb7f 100644 --- a/PrusaSlicer/printer/AnyCubic Photon Zero.ini +++ b/PrusaSlicer/printer/AnyCubic Photon Zero.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.3.0+win64 on 2021-03-17 at 02:45:57 UTC +# generated by PrusaSlicer 2.3.3+win64 on 2021-12-06 at 03:23:03 UTC absolute_correction = 0 area_fill = 50 bed_custom_model = @@ -26,7 +26,7 @@ min_exposure_time = 1 min_initial_exposure_time = 1 print_host = printer_model = SL1 -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_ZERO\nFILEFORMAT_PW0\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nLiftHeight_6\nLiftingSpeed_60\nRetractSpeed_150\nEND_CUSTOM_VALUES +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTON_ZERO\nFILEFORMAT_PW0\n\nSTART_CUSTOM_VALUES\nWaitTimeBeforeCure_2.5\nLiftHeight_6\nLiftingSpeed_60\nRetractSpeed_150\nEND_CUSTOM_VALUES printer_settings_id = printer_technology = SLA printer_variant = default |