Bene4 Mono and Layer Issue Z Tracker

* (Add) Settings & Issues: Enable or disable Empty Layers
* (Add) PrusaSlicer Printer: Nova Bene4 Mono
* (Add) CWS: Support the GRAY2RGB and RBG2GRAY encoding for Bene Mono
* (Add) Layer issue Z map paired with layer navigation tracker bar
* (Change) Shortcuts: + and - to go up and down on layers were change to W and S keys. Reason: + and - are bound to zoom and can lead to problems
* (Upgrade) OpenCV from 4.2 to 4.3
* (Fix) CWS: Add missing Platform X,Y,Z size when converting from SL1
* (Fix) CWS: Invert XY resolution when converting from SL1

2 files changed, 39 insertions, 2 deletions

diff --git a/PrusaSlicer/printer/Nova3D Bene4 Mono.ini b/PrusaSlicer/printer/Nova3D Bene4 Mono.ini
new file mode 100644
index 0000000..583d56d
--- /dev/null
+++ b/PrusaSlicer/printer/Nova3D Bene4 Mono.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-09-04 at 20:31:20 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,116x0,116x65.02,0x65.02
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 65.02
+display_mirror_x = 0
+display_mirror_y = 0
+display_orientation = portrait
+display_pixels_x = 2549
+display_pixels_y = 1566
+display_width = 116
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 130
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_NOVA3D\nPRINTER_MODEL_BENE4_MONO\n\nSTART_CUSTOM_VALUES\nFLIP_XY\nXppm_19.608\nYppm_19.608\nWaitBeforeExpoMs_3000\nLiftHeight_4\nLiftSpeed_120\nRetractSpeed_120\nLiftWhenFinished_80\nBlankingLayerTime_0\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nNOVAMAKER_GRAY2RGB_ENCODE ; Required for Bene4 Mono as output images are in RGB\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/Nova3D Elfin.ini b/PrusaSlicer/printer/Nova3D Elfin.ini
index 89c22f7..b9375de 100644
--- a/PrusaSlicer/printer/Nova3D Elfin.ini
+++ b/PrusaSlicer/printer/Nova3D Elfin.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-06-26 at 17:18:51 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-09-04 at 22:08:49 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -25,7 +25,7 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_NOVA3D\nPRINTER_MODEL_ELFIN\n\nSTART_CUSTOM_VALUES\nXppm_19.324\nYppm_19.324\nWaitBeforeExpoMs_2000\nLiftHeight_4\nLiftSpeed_120\nRetractSpeed_120\nLiftWhenFinished_80\nBlankingLayerTime_0\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_NOVA3D\nPRINTER_MODEL_ELFIN\n\nSTART_CUSTOM_VALUES\nFLIP_XY\nXppm_19.324\nYppm_19.324\nWaitBeforeExpoMs_2000\nLiftHeight_4\nLiftSpeed_120\nRetractSpeed_120\nLiftWhenFinished_80\nBlankingLayerTime_0\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default