v3.8.0v3.8.0

- **File formats:**
  - (Add) Property: DisplayTotalOnTime
  - (Add) Property: DisplayTotalOffTime
  - (Add) SL1File Property: high_viscosity_tilt_time
- **Tools**
  - **I printed this file**
    - (Add) Display on time for the print information
    - (Improvement) Labels on numeric box
    - (Improvement) Show print time label formatted as hh:mm:ss
  - **PCB Exposure:**
    - (Improvement) Increase "Exposure time" maximum from 200s to 1000s (#592)
    - (Fix) Set `BottomLightHeight` to 0
    - (Fix) Set `TransitionLayerCount` to 0
- **Issues:**
  - (Improvement) Overhang detection by using a dynamic cross kernel
  - (Improvement) Bring back the discard logic of "false-positive" islands based on overhang detection but improve the threshold of the detection to be safer (#591, #591)
- **PrusaSlicer:**
  - (Change) Elegoo Mars 2 to use file version 4
  - (Change) Elegoo Mars 2 Pro to use file version 4
- (Add) Status bar: On and Off time (hh:mm:ss) as tooltip in the Print time label
- (Improvement) When any of libcvextern dependencies are missing, it try to show the missing libraries in the error message (Linux only)
- (Improvement) Auto-upgrade procedure for non-Windows systems
- (Improvement) macOS arm64 (M1/M2) can now run natively if installed via the auto installer script
- (Fix) Error on Mat cache manager when file have only one layer
- (Fix) Suggestion "Transition layer count" shows as never applied when using with file formats that use in-firmware transition layers
- (Upgrade) openCV from 4.5.4 to 4.6.0
  - Custom library is now built to strip unused dependencies and reduce library size
- (Remove) arch and rhel packages in favor of a generic linux

2 files changed, 12 insertions, 4 deletions

diff --git a/PrusaSlicer/printer/Elegoo Mars 2 Pro.ini b/PrusaSlicer/printer/Elegoo Mars 2 Pro.ini
index a544198..d72d70d 100644
--- a/PrusaSlicer/printer/Elegoo Mars 2 Pro.ini
+++ b/PrusaSlicer/printer/Elegoo Mars 2 Pro.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:38:08 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-10-28 at 13:06:56 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,7 +27,7 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_MARS2_PRO\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_60\nLiftSpeed_80\nRetractSpeed_210\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_MARS2_PRO\nFILEVERSION_4\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_60\nLiftSpeed_80\nRetractSpeed_210\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
@@ -34,5 +35,8 @@ printer_vendor =
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
 slow_tilt_time = 8
 thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/Elegoo Mars 2.ini b/PrusaSlicer/printer/Elegoo Mars 2.ini
index 9d2de78..095b70c 100644
--- a/PrusaSlicer/printer/Elegoo Mars 2.ini
+++ b/PrusaSlicer/printer/Elegoo Mars 2.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-13 at 02:38:16 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-10-28 at 13:06:50 UTC
 absolute_correction = 0
 area_fill = 50
 bed_custom_model = 
@@ -17,6 +17,7 @@ elefant_foot_compensation = 0.2
 elefant_foot_min_width = 0.2
 fast_tilt_time = 5
 gamma_correction = 1
+high_viscosity_tilt_time = 10
 host_type = octoprint
 inherits = Original Prusa SL1
 max_exposure_time = 120
@@ -26,7 +27,7 @@ min_exposure_time = 1
 min_initial_exposure_time = 1
 print_host = 
 printer_model = SL1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_MARS2\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_60\nLiftSpeed_80\nRetractSpeed_210\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_MARS2\nFILEVERSION_4\nFILEFORMAT_CTB\n\nSTART_CUSTOM_VALUES\nLightOffDelay_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_60\nLiftSpeed_80\nRetractSpeed_210\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
 printer_settings_id = 
 printer_technology = SLA
 printer_variant = default
@@ -34,5 +35,8 @@ printer_vendor =
 printhost_apikey = 
 printhost_cafile = 
 relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
 slow_tilt_time = 8
 thumbnails = 400x400,800x480