v2.1.3v2.1.3

* (Add) PrusaSlicer printers:
   * Peopoly Phenom XXL
   * QIDI 3D ibox mono
   * Wanhao CGR Mini Mono
   * Wanhao CGR Mono
* (Add) PrusaSlicer light supports profiles
* (Add) Calibration - Elephant Foot: Mirror output
* (Add) Calibration - XYZ Accuracy: Mirror output
* (Add) Calibration - Tolerance: Mirror output
* (Add) Calibration - Grayscale: Mirror output
* (Add) Scripts on github
* (Change) Save 'Display Width' and 'Height' to calibration profiles and load them back only if file format aware from these properties
* (Fix) Tool - Morph: Set a rectangular 3x3 kernel by default
* (Fix) Tool - Blur: Set a rectangular 3x3 kernel by default
* (Fix) Calibration - Elephant Foot: Include part scale on profile text
* (Fix) MSI dont store instalation path (#121)

12 files changed, 500 insertions, 0 deletions

diff --git a/PrusaSlicer/printer/Peopoly Phenom XXL.ini b/PrusaSlicer/printer/Peopoly Phenom XXL.ini
new file mode 100644
index 0000000..2b25a87
--- /dev/null
+++ b/PrusaSlicer/printer/Peopoly Phenom XXL.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-05 at 20:51:10 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,527.04x0,527.04x296.46,0x296.46
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 296.46
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 3840
+display_pixels_y = 2160
+display_width = 527.04
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 550
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_PEOPOLY\nPRINTER_MODEL_PHENOM_XXL\n\nSTART_CUSTOM_VALUES\nLayerOffTime_2\nBottomLightOffDelay_8\nBottomLiftHeight_15\nLiftHeight_14\nBottomLiftSpeed_32\nLiftSpeed_35\nRetractSpeed_100\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/QIDI I-Box Mono.ini b/PrusaSlicer/printer/QIDI I-Box Mono.ini
new file mode 100644
index 0000000..e870f9d
--- /dev/null
+++ b/PrusaSlicer/printer/QIDI I-Box Mono.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-05 at 20:54:54 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,192x0,192x120,0x120
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 120
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 3840
+display_pixels_y = 2400
+display_width = 192
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 200
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_QIDI\nPRINTER_MODEL_I-BOX_MONO\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_6\nLiftHeight_6\nBottomLiftSpeed_65\nLiftSpeed_65\nRetractSpeed_100\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/Wanhao CGR Mini Mono.ini b/PrusaSlicer/printer/Wanhao CGR Mini Mono.ini
new file mode 100644
index 0000000..12a718a
--- /dev/null
+++ b/PrusaSlicer/printer/Wanhao CGR Mini Mono.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-05 at 21:18:50 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 130.56
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 1620
+display_pixels_y = 2560
+display_width = 82.62
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 200
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_WANHAO\nPRINTER_MODEL_CGR_MINI_MONO\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_5\nLiftHeight_5\nBottomLiftSpeed_65\nLiftSpeed_50\nRetractSpeed_100\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/printer/Wanhao CGR Mono.ini b/PrusaSlicer/printer/Wanhao CGR Mono.ini
new file mode 100644
index 0000000..9770f50
--- /dev/null
+++ b/PrusaSlicer/printer/Wanhao CGR Mono.ini
@@ -0,0 +1,37 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-05 at 21:23:35 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,192x0,192x120,0x120
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 120
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 1620
+display_pixels_y = 2560
+display_width = 192
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 200
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_WANHAO\nPRINTER_MODEL_CGR_MONO\n\nSTART_CUSTOM_VALUES\nLayerOffTime_0\nBottomLightOffDelay_0\nBottomLiftHeight_6\nLiftHeight_6\nBottomLiftSpeed_60\nLiftSpeed_50\nRetractSpeed_60\nBottomLightPWM_255\nLightPWM_255\nAntiAliasing_4 ; Use 0 or 1 for disable AntiAliasing with "printer gamma correction" set to 0, otherwise use multiples of 2 and "gamma correction" set to 1 for enable\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+slow_tilt_time = 8
+thumbnails = 400x400,800x480
diff --git a/PrusaSlicer/sla_print/Universal 0.01 - Light Supports.ini b/PrusaSlicer/sla_print/Universal 0.01 - Light Supports.ini
new file mode 100644
index 0000000..3d03b66
--- /dev/null
+++ b/PrusaSlicer/sla_print/Universal 0.01 - Light Supports.ini
@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-07 at 02:08:08 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 10
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.025 UltraDetail
+layer_height = 0.01
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.5
+support_head_penetration = 0.3
+support_head_width = 2
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1
diff --git a/PrusaSlicer/sla_print/Universal 0.02 - Light Supports.ini b/PrusaSlicer/sla_print/Universal 0.02 - Light Supports.ini
new file mode 100644
index 0000000..96da187
--- /dev/null
+++ b/PrusaSlicer/sla_print/Universal 0.02 - Light Supports.ini
@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-07 at 02:09:11 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 6
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.025 UltraDetail
+layer_height = 0.02
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.5
+support_head_penetration = 0.3
+support_head_width = 2
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1
diff --git a/PrusaSlicer/sla_print/Universal 0.03 - Light Supports.ini b/PrusaSlicer/sla_print/Universal 0.03 - Light Supports.ini
new file mode 100644
index 0000000..02c00f7
--- /dev/null
+++ b/PrusaSlicer/sla_print/Universal 0.03 - Light Supports.ini
@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-07 at 02:09:40 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 4
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.035 Detail
+layer_height = 0.03
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.5
+support_head_penetration = 0.3
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1
diff --git a/PrusaSlicer/sla_print/Universal 0.04 - Light Supports.ini b/PrusaSlicer/sla_print/Universal 0.04 - Light Supports.ini
new file mode 100644
index 0000000..fdb07f3
--- /dev/null
+++ b/PrusaSlicer/sla_print/Universal 0.04 - Light Supports.ini
@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-07 at 02:10:03 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 4
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.05 Normal
+layer_height = 0.04
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.5
+support_head_penetration = 0.3
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1
diff --git a/PrusaSlicer/sla_print/Universal 0.05 - Light Supports.ini b/PrusaSlicer/sla_print/Universal 0.05 - Light Supports.ini
new file mode 100644
index 0000000..698b7a2
--- /dev/null
+++ b/PrusaSlicer/sla_print/Universal 0.05 - Light Supports.ini
@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-07 at 02:10:30 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 3
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.05 Normal
+layer_height = 0.05
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.5
+support_head_penetration = 0.3
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1
diff --git a/PrusaSlicer/sla_print/Universal 0.10 - Light Supports.ini b/PrusaSlicer/sla_print/Universal 0.10 - Light Supports.ini
new file mode 100644
index 0000000..b3fab88
--- /dev/null
+++ b/PrusaSlicer/sla_print/Universal 0.10 - Light Supports.ini
@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-07 at 02:11:26 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 3
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.1 Fast
+layer_height = 0.1
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.6
+support_head_penetration = 0.4
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.3
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1
diff --git a/PrusaSlicer/sla_print/Universal 0.15 - Light Supports.ini b/PrusaSlicer/sla_print/Universal 0.15 - Light Supports.ini
new file mode 100644
index 0000000..e1dbed6
--- /dev/null
+++ b/PrusaSlicer/sla_print/Universal 0.15 - Light Supports.ini
@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-07 at 02:12:14 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 3
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.1 Fast
+layer_height = 0.15
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.7
+support_head_penetration = 0.4
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.3
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1
diff --git a/PrusaSlicer/sla_print/Universal 0.20 - Light Supports.ini b/PrusaSlicer/sla_print/Universal 0.20 - Light Supports.ini
new file mode 100644
index 0000000..cab31df
--- /dev/null
+++ b/PrusaSlicer/sla_print/Universal 0.20 - Light Supports.ini
@@ -0,0 +1,44 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2021-01-07 at 02:12:28 UTC
+compatible_printers = 
+compatible_printers_condition = 
+default_sla_print_profile = 
+faded_layers = 3
+hollowing_closing_distance = 2
+hollowing_enable = 0
+hollowing_min_thickness = 3
+hollowing_quality = 0.5
+inherits = 0.1 Fast
+layer_height = 0.2
+output_filename_format = {input_filename_base}_{material_type}{layer_height}mm_{printer_model}_{print_time}.sl1
+pad_around_object = 0
+pad_around_object_everywhere = 0
+pad_brim_size = 1.6
+pad_enable = 1
+pad_max_merge_distance = 50
+pad_object_connector_penetration = 0.3
+pad_object_connector_stride = 10
+pad_object_connector_width = 0.5
+pad_object_gap = 1
+pad_wall_height = 0
+pad_wall_slope = 90
+pad_wall_thickness = 0.4
+sla_print_settings_id = 
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_base_safety_distance = 1
+support_buildplate_only = 0
+support_critical_angle = 45
+support_head_front_diameter = 0.7
+support_head_penetration = 0.4
+support_head_width = 3
+support_max_bridge_length = 10
+support_max_bridges_on_pillar = 3
+support_max_pillar_link_distance = 10
+support_object_elevation = 5
+support_pillar_connection_mode = zigzag
+support_pillar_diameter = 1.3
+support_pillar_widening_factor = 0
+support_points_density_relative = 100
+support_points_minimal_distance = 1
+supports_enable = 1